Database Users

Lost root after 4.1.2

I was running stock 4.1.1 rooted with NO cwm and I accepted the OTA undate two days ago. Now, I have SU still installed but nothing can obtain root permissions. I used Wugz toolkit to reflash su binaries through TWRP a few times and still no dice. Any thoughts?

Trickee360 said:
I was running stock 4.1.1 rooted with NO cwm and I accepted the OTA undate two days ago. Now, I have SU still installed but nothing can obtain root permissions. I used Wugz toolkit to reflash su binaries through TWRP a few times and still no dice. Any thoughts?
Click to expand...
Click to collapse
Here you go. Just follow the directions. It works fine for 4.1.2.
http://www.talkandroid.com/guides/misc/how-to-unlock-and-root-the-nexus-7/

veeman said:
Here you go. Just follow the directions. It works fine for 4.1.2.
http://www.talkandroid.com/guides/misc/how-to-unlock-and-root-the-nexus-7/
Click to expand...
Click to collapse
Welp, I've never actually used adb to push anything manually myself, but now is as good as time as any to try it. The link to CWM on that page is dead. Where else can I get it?

Trickee360 said:
Welp, I've never actually used adb to push anything manually myself, but now is as good as time as any to try it. The link to CWM on that page is dead. Where else can I get it?
Click to expand...
Click to collapse
http://www.clockworkmod.com/rommanager
You can download the Touch Recovery on the right side for Google Nexus 7 version. But make sure when you put in
Code:
fastboot flash recovery recovery-clockwork-touch-6.0.1.0-grouper.img
for step 5. instead of what they put.

veeman said:
http://www.clockworkmod.com/rommanager
You can download the Touch Recovery on the right side for Google Nexus 7 version. But make sure when you put in
Code:
fastboot flash recovery recovery-clockwork-touch-6.0.1.0-grouper.img
for step 5. instead of what they put.
Click to expand...
Click to collapse
got it. thanks much

Will only boot to stock recovery
veeman said:
You can download the Touch Recovery on the right side for Google Nexus 7 version. But make sure when you put in
Code:
fastboot flash recovery recovery-clockwork-touch-6.0.1.0-grouper.img
for step 5. instead of what they put.
Click to expand...
Click to collapse
Every time I reboot into recovery from the bootloader after flashing any recovery (except stock), it fails to boot into recovery. What happens is it shows the Google/Unlocked screen for a couple seconds, goes black (this is where it should enter recovery), but then shows the Google screen again and boots normally. I have tried this with two CWM recoveries and a TWRP recovery, both plugged into a computer and not. when flashing recovery it says OKAY. It seems as if something has gotten corrupted.
Before updating to 4.1.2 everything was working. To get the 4.1.2 update to install, I had to revert back to stock recovery and also revert back to the stock wallet app. Now 'su' is still a command, but it does not do what it is supposed to and no apps have root.
:'(

jphilli85 said:
Every time I reboot into recovery from the bootloader after flashing any recovery (except stock), it fails to boot into recovery. What happens is it shows the Google/Unlocked screen for a couple seconds, goes black (this is where it should enter recovery), but then shows the Google screen again and boots normally. I have tried this with two CWM recoveries and a TWRP recovery, both plugged into a computer and not. when flashing recovery it says OKAY. It seems as if something has gotten corrupted.
Before updating to 4.1.2 everything was working. To get the 4.1.2 update to install, I had to revert back to stock recovery and also revert back to the stock wallet app. Now 'su' is still a command, but it does not do what it is supposed to and no apps have root.
:'(
Click to expand...
Click to collapse
You can just root again and you will have root access.

I lost root too, so I just opened wugtoolkit and hit root. no unlock needed so no loss of programs either.

jphilli85 said:
Every time I reboot into recovery from the bootloader after flashing any recovery (except stock), it fails to boot into recovery. What happens is it shows the Google/Unlocked screen for a couple seconds, goes black (this is where it should enter recovery), but then shows the Google screen again and boots normally. I have tried this with two CWM recoveries and a TWRP recovery, both plugged into a computer and not. when flashing recovery it says OKAY. It seems as if something has gotten corrupted.
Before updating to 4.1.2 everything was working. To get the 4.1.2 update to install, I had to revert back to stock recovery and also revert back to the stock wallet app. Now 'su' is still a command, but it does not do what it is supposed to and no apps have root.
:'(
Click to expand...
Click to collapse
Any news about this. I stay in the same problem.

Here's my experience:
Stock ROM, rooted, custom kernel.
Got the notification for the 4.1.2 OTA update, so I did a nandroid backup in TWRP. Then I flashed back to the stock recovery and boot.img.
I was thinking that I might lose root, based on other's problems. Looked into installing Root Keeper by Voodoo. In the description it said the same feature is built into SuperSU. Problem was it's built into the paid version, which I didn't have (discovered this after it was too late). Installed 4.1.2 OTA. I lost root. My bootloader was updated to 3.41. I also was not able to flash a recovery. Fastboot flash would not work, Wugs toolkit didn't work. Tried several methods. After reading several threads that have been pretty active for the last few days, here's what finally worked for me. Found it in another thread, which I can't find at the moment.
adb reboot bootloader
fastboot flash bootloader bootloader-grouper-3.34.img from the JRO03D factory image
fastboot flash recovery TWRP img
fastboot reboot-bootloader
TWRP recovery started up :laugh:.
flashed SuperSU to re-root, it was sucessful.
updated busybox binaries.
installed OTA rootkeeper, so hopefully this won't happen again.
I'm not really sure I want to try flashing the 3.41 bootloader.
What a pain in the A.
Now it's time to flash faux kernel.

jayyo said:
Here's my experience:
Stock ROM, rooted, custom kernel.
Got the notification for the 4.1.2 OTA update, so I did a nandroid backup in TWRP. Then I flashed back to the stock recovery and boot.img.
I was thinking that I might lose root, based on other's problems. Looked into installing Root Keeper by Voodoo. In the description it said the same feature is built into SuperSU. Problem was it's built into the paid version, which I didn't have (discovered this after it was too late). Installed 4.1.2 OTA. I lost root. My bootloader was updated to 3.41. I also was not able to flash a recovery. Fastboot flash would not work, Wugs toolkit didn't work. Tried several methods. After reading several threads that have been pretty active for the last few days, here's what finally worked for me. Found it in another thread, which I can't find at the moment.
adb reboot bootloader
fastboot flash bootloader bootloader-grouper-3.34.img from the JRO03D factory image
fastboot flash recovery TWRP img
fastboot reboot-bootloader
TWRP recovery started up :laugh:.
flashed SuperSU to re-root, it was sucessful.
updated busybox binaries.
installed OTA rootkeeper, so hopefully this won't happen again.
I'm not really sure I want to try flashing the 3.41 bootloader.
What a pain in the A.
Now it's time to flash faux kernel.
Click to expand...
Click to collapse
So, the bootloader 3.41 is the problem?

Southmad said:
So, the bootloader 3.41 is the problem?
Click to expand...
Click to collapse
For some people, yes. No idea why.

veeman said:
http://www.clockworkmod.com/rommanager
You can download the Touch Recovery on the right side for Google Nexus 7 version. But make sure when you put in
Code:
fastboot flash recovery recovery-clockwork-touch-6.0.1.0-grouper.img
for step 5. instead of what they put.
Click to expand...
Click to collapse
Would that image work ok for Galaxy s3? Or there is no difference at all, just matter the 4.1.2 android version?
Cuz i updated my device throught Kies (cuzz from the device itself it didnt allow, stating that the image has been modifyied :angel: ) and after that even with the persistent mode on Super SU the root is gone

help! about factory image ota

fastboot mode erase * and fastboot flash all image files。
in about system update.install ota file. restart error
:crying::crying::crying:

sellength said:
fastboot mode erase * and fastboot flash all image files。
in about system update.install ota file. restart error
:crying::crying::crying:
Click to expand...
Click to collapse
Wrong section, this is for development only.
As for your question, I do not understand what you are asking, what are you attempting to do with fastboot mode?

xIC-MACIx said:
Wrong section, this is for development only.
As for your question, I do not understand what you are asking, what are you attempting to do with fastboot mode?
Click to expand...
Click to collapse
the development section. only dev question ? ok

sellength said:
fastboot mode erase * and fastboot flash all image files。
in about system update.install ota file. restart error
:crying::crying::crying:
Click to expand...
Click to collapse
If you have the factory image, from Google (and nowhere else), just run the flash-all.bat file. You "may" have to unlock your bootloader prior to running it if you haven't already, and you'll need to have the device in fastboot mode prior to running the batch file too, but once those 2 simple tasks are done, the batch file takes care of the rest.
If your using a toolkit or some other method for flashing a factory image, I suggest stopping, and just doing the above.

This forum is not for any threads for questions... this needs to go to General or Q/A... just download the factory image from Google, reboot into fastboot and run the flash-all script... you don't need to be unlocked...

craigacgomez said:
This forum is not for any threads for questions... this needs to go to General or Q/A... just download the factory image from Google, reboot into fastboot and run the flash-all script... you don't need to be unlocked...
Click to expand...
Click to collapse
If im on 4.2 and my device fails to update to 4.2.1, saying me error on recovery, should I only unzip the image from google, put my n10 on fastboot mode and run the flash all script as you said? Will this erase my data? Im just root, haven't unlocked my bootloader.
Sorry for my english

lKBZl said:
If im on 4.2 and my device fails to update to 4.2.1, saying me error on recovery, should I only unzip the image from google, put my n10 on fastboot mode and run the flash all script as you said? Will this erase my data? Im just root, haven't unlocked my bootloader.
Sorry for my english
Click to expand...
Click to collapse
same question
I've unlocked & rooted & the OTA fails trying to flash the recovery (trying to flash from twrp, duh, can't overwrite).
How should I go about updating the system w/o wiping out everything I already have?
If I fastboot flash_image system will it only overwrite changes to my system partition & leave my data & apps alone?
I've got OTA Root Keeper installed, so I'm hopeful even if I lose root I can get it back easy enough (either way, no biggie; can always reroot, ain't no thang).
tia for any advice.
edit: f-bomb... no 4.2.1 img available for N10 yet...
Sent from my Nexus 10 using xda premium

dboftlp said:
same question
I've unlocked & rooted & the OTA fails trying to flash the recovery (trying to flash from twrp, duh, can't overwrite).
How should I go about updating the system w/o wiping out everything I already have?
If I fastboot flash_image system will it only overwrite changes to my system partition & leave my data & apps alone?
I've got OTA Root Keeper installed, so I'm hopeful even if I lose root I can get it back easy enough (either way, no biggie; can always reroot, ain't no thang).
tia for any advice.
edit: f-bomb... no 4.2.1 img available for N10 yet...
Sent from my Nexus 10 using xda premium
Click to expand...
Click to collapse
There is... i've seen a post in google + from a guy that links you to a google page with n10 4.2.1 img.

sikagoon7 said:
Nexus 10 hasn't gotten the (JOP40D) images yet which means the only way to get the 4.2.1 update is to get an OTA. I think the OTA link is floating around AndroidPolice and AndroidCentral somewhere but you'll have to look. Whatever images for 4.2.1 on the Nexus 10 are fake because Google hasn't even released them yet.
https://developers.google.com/android/nexus/images
Click to expand...
Click to collapse
yep, & therein lies the problem. I can't seem to flash the OTA b/c I'm getting recovery errors...
when I tried flashing stock recovery I just get red exclamation
:-\
Sent from my Nexus 10 using xda premium

dboftlp said:
yep, & therein lies the problem. I can't seem to flash the OTA b/c I'm getting recovery errors...
when I tried flashing stock recovery I just get red exclamation
:-\
Sent from my Nexus 10 using xda premium
Click to expand...
Click to collapse
So what are you gonna do? I want to have the 4.2.1 and be able to update my n10 with the uncoming otas, I dunno what should I do now, im kinda stuck..

lKBZl said:
So what are you gonna do? I want to have the 4.2.1 and be able to update my n10 with the uncoming otas, I dunno what should I do now, im kinda stuck..
Click to expand...
Click to collapse
Flash stock recovery .... and get the OTA, then re-flash TWRP ....
You may have to re-root ...

Watcher64 said:
Flash stock recovery .... and get the OTA, then re-flash TWRP ....
You may have to re-root ...
Click to expand...
Click to collapse
I already have stock recovery... it's not about the recovery, I think it's because i put aosp browser instead of the default one, and when ota check system/apps, it finds something has changed. Also may be due to the root?

lKBZl said:
I already have stock recovery... it's not about the recovery, I think it's because i put aosp browser instead of the default one, and when ota check system/apps, it finds something has changed. Also may be due to the root?
Click to expand...
Click to collapse
I don't see how that would matter, I used the aosp browser as well, and all I did was put stock recovery back on ..
hmmmm
Maybe you should just flash one of the updated stock/rooted roms in the dev section.

[Q] Did I brick my Nexus 4?

Hi,
Last night i was playing with my N4 (with some root applications) and an app asked for a reboot. I just pressed yes so that the phone will reboot (I have done this earlier without any issues). Suddenly the device doesn't boot up. My N4 is stuck at a black screen. While trying to boot up, the Google logo appears and then a black screen. It doesn't advance to the 'X' logo. I'm running on stock, rooted phone (used N4 toolkit by Wugfresh to root).
I'm able to boot into recovery although. I tried all the possible means, wiped cache, dalvik cache, did a factory reset, backed up the system and tried to restore the same. Nothing happened.
Then i tried the "Back to Stock" option in the N4 toolkit and chose the option "Soft-brick/Bootloop" to recover my N4. These are what happened:
Downloaded the 4.2.2 image from Google servers and tried to flash in the device with prior instruction from the toolkit. Everything went fine until the flashing process. In the last step the CMD window opens up saying it is unrooting and flashing stock and immediately it'll bring up a complete message saying the flashing is complete and to wait until the device boots up. But nothing happens again.
I tried the automatic flashing and on the downloading window it saying download failed and hash checks failed meaning its not downloading.
I searched all the possible threads in a day to find a similar problem but in vain. I'm not a noob but i'm too lazy . But i would do anything to bring my N4 back to life. Anyone please show me a direction.
In short:
Status: Soft-Bricked (guess so), black screen after Google logo
Version: Stock 4.2.2 (rooted+busybox+supersu+twrp)
Able to boot to recovering: Yes, bootable to recovery and bootloader.
Tried Nexus toolkit recovery: Yes but in vain.
Gave up: No and never, I'm searching and searching for answers and I'm worried if I'll end up in a hard brick. :crying:
Guys, please help.
Thank You!
Aghil

I'm just taking a wild guess here - I'm not responsible if anything bad happens, and you might want to wait to someone else seconds my suggestion in any case (although I can't imagine things getting worse as long as you flash N4 stuff). But have you tried flashing a new boot.img/reset kernel from recovery or via fastboot/toolkit?

ameinild said:
I'm just taking a wild guess here - I'm not responsible if anything bad happens, and you might want to wait to someone else seconds my suggestion in any case (although I can't imagine things getting worse as long as you flash N4 stuff). But have you tried flashing a new boot.img/reset kernel from recovery or via fastboot/toolkit?
Click to expand...
Click to collapse
Err...nope I haven't tried any and will wait until someone seconds you. Meanwhile I have wiped off the ROM through the option in recovery. Still will I be able to do what you said? Also if could direct me to a "how-to" thread would be great. Just that I don't wanna mess up again.

Also, is there a way to transfer a ROM to N4 through fastboot? So that I can install the ROM through TWRP.

aghilvr said:
Err...nope I haven't tried any and will wait until someone seconds you. Meanwhile I have wiped off the ROM through the option in recovery. Still will I be able to do what you said? Also if could direct me to a "how-to" thread would be great. Just that I don't wanna mess up again.
Click to expand...
Click to collapse
No, my suggestion would require that the ROM is still on the phone, so you should restore your ROM prior to my suggestion. And I'm by no means an expert (therefore the disclaimer), but I *think* that since it's a bootup problem, it could be solved by flashing a new boot.img (which is essentially flashing a new kernel to the system).
But yeah, let's see if others think this might help, haven't researched it, is at work right now. Just throwing in a suggestion, that's all...
Also, is there a way to transfer a ROM to N4 through fastboot? So that I can install the ROM through TWRP.
Click to expand...
Click to collapse
I *think* (again, I'm totally not sure about this, as I haven't tried it) that you can sideload a ROM via zip file from recovery, but since I haven't tried it I'm not sure - can anybody confirm???
EDIT: Chromium's suggestion is better, by pushing the ROM.zip to the device and flashing from recovery (check md5 first, just in case).

aghilvr said:
Also, is there a way to transfer a ROM to N4 through fastboot? So that I can install the ROM through TWRP.
Click to expand...
Click to collapse
Yes there is. Your nexus is not bricked and this is why you shouldnt use toolkits to do things. This is honestly an extremely easy and simple fix. Use adb to push a rom onto the n4.
Code:
adb push \path\to\rom.zip /sdcard
Boot into recovery, do a full wipe, and flash the rom.

You said you downloaded the Google images.
Just boot your phone into the bootloader and run the flashall.bat that is in the Google image folder.
Note this will probably fully wipe you're phone in the process
Sent from my Nexus 4 using xda app-developers app

try this it may help u this toolkit is damn easy to use :
http://forum.xda-developers.com/showthread.php?t=1995688

Okay, thanks guys. I'm on it. Will let you know when I'm done.

That same thing happened to me once. I had to extract the google file and look for the 4 img files(bootloader, system, userdata, recovery) and flash them with toolkit manually and it fixed it, but it erased everything on my sd

I tried to load the file "occam-jdq39-factory-345dc199.tar" into my phone using the ADB sideload feature in the toolkit. I don't have the SDK installed hence I depended the tool again. But now the tool only loads .zip file and not .tar as the one that i downloaded. Am I doing it right?

aghilvr said:
I tried to load the file "occam-jdq39-factory-345dc199.tar" into my phone using the ADB sideload feature in the toolkit. I don't have the SDK installed hence I depended the tool again. But now the tool only loads .zip file and not .tar as the one that i downloaded. Am I doing it right?
Click to expand...
Click to collapse
K if you have a custom recovery installed, there isnt much you need to do to fix the issue.
First setup adb/fastboot by reading this
Then boot the phone into recovery, and plug it into the computer. Open a new command prompt window and use adb like this:
Code:
adb push \path\to\rom.zip /sdcard
Then you can unplug the phone. From recovery go to the install menu, find the rom that you just pushed, and flash it.

chromium96 said:
K if you have a custom recovery installed, there isnt much you need to do to fix the issue.
First setup adb/fastboot by reading this
Then boot the phone into recovery, and plug it into the computer. Open a new command prompt window and use adb like this:
Code:
adb push \path\to\rom.zip /sdcard
Then you can unplug the phone. From recovery go to the install menu, find the rom that you just pushed, and flash it.
Click to expand...
Click to collapse
Okay, installing the SDK. And the command saying "rom.zip", the file that I have is like "rom.tar". Does it matter? I downloaded the rom from here https://developers.google.com/android/nexus/images

aghilvr said:
Okay, installing the SDK. And the command saying "rom.zip", the file that I have is like "rom.tar". Does it matter? I downloaded the rom from here https://developers.google.com/android/nexus/images
Click to expand...
Click to collapse
No the tar wont work through recovery. You should download a rom from here or here.
If you want to flash the stock rom through recovery you can download it here.

chromium96 said:
No the tar wont work through recovery. You should download a rom from here or here.
If you want to flash the stock rom through recovery you can download it here.
Click to expand...
Click to collapse
Oh that's why it didn't work all the time
Thanks chromium :fingers-crossed:

Hey thanks guys, my device is back to normal. Chromium a special thanks for you for helping me out. See you guys with my next problem/queris!

[Q] Unable to Flash Nexus 7

hello everyone..
In serious need of help here and hope someone can help..
Due to the massive battery drain issue I have been having, I tried to flash the original stock rom on my nexus 7 and
things have gone downhill really bad..
in the past, I flashed using this guide (http://forum.xda-developers.com/showthread.php?t=1907796)
without any problems but last night.. I encountered errors when trying to flash the bootloader
and radio IMG files.. neeedless to say when it comes to flashing the rom in, it came out with errors and my nexus remain OS-less
the errors when trying to flash the bootloader and radio are
"failed (command write failed (Invalid Argument))"
can anyone help me?
p.s :- if anyone can even suggest me a easier way to flash custom roms in and so forth, your suggestion will be most welcomed..
also, I did try wug's rootkit plus the nexus 7 toolkit or something, both came out errors too when too do any flashing in relating to
the bootloader or system.. thanks

Why were you trying to flash the bootloader? Were you trying to update to 4.18?

Username invalid said:
Why were you trying to flash the bootloader? Were you trying to update to 4.18?
Click to expand...
Click to collapse
actually, my bootloader boots fine, it shows tilapia 4.18.
so does this mean I dont have to flash it?
if I dont have to flash the bootloader, do I have to flash the radio?
sorry, kind of a noob in these things..

Anyway, is it normal for the bootloader flash attempt to fail?

hamiksu said:
Anyway, is it normal for the bootloader flash attempt to fail?
Click to expand...
Click to collapse
No, it's not normal for it to fail.
You really don't need to flash either unless one of them is screwed up or you are upgrading to a newer version. Bootloader flashes are risky anyway. To avoid flashing them, you can either remove code from the updater script or remove them from the factory image files entirely.

korockinout13 said:
No, it's not normal for it to fail.
You really don't need to flash either unless one of them is screwed up or you are upgrading to a newer version. Bootloader flashes are risky anyway. To avoid flashing them, you can either remove code from the updater script or remove them from the factory image files entirely.
Click to expand...
Click to collapse
hmm, ok..
then I will go back home and do the system flashing and try and post out the errors it stated there..
really hope to get my nexus back on line...

This is what I get when I tried to flash the image
Hope someone can guide me on what to do next.

hamiksu said:
This is what I get when I tried to flash the image
Hope someone can guide me on what to do next.
Click to expand...
Click to collapse
Try to unlock your bootloader before flashing image with the command:
fastboot oem unlock

ameinild said:
Try to unlock your bootloader before flashing image with the command:
fastboot oem unlock
Click to expand...
Click to collapse
it says my bootloader is already unlocked

hamiksu said:
it says my bootloader is already unlocked
Click to expand...
Click to collapse
Then it sounds like something happened to your system partition that should not have happened.
Are you sure the system image you're trying to flash is valid, do the md5 sums match?
How about flashing another system image?
Or flash a custom recovery, and install a new ROM from there?

ameinild said:
Try to unlock your bootloader before flashing image with the command:
fastboot oem unlock
Click to expand...
Click to collapse
ameinild said:
Then it sounds like something happened to your system partition that should not have happened. Sorry, can't help you there...
Click to expand...
Click to collapse
meaning my system partition is screwed?
anyone knows how to go around this problem?
p.s :- anyway ameinild, thanks for trying to help

hamiksu said:
p.s :- anyway ameinild, thanks for trying to help
Click to expand...
Click to collapse
I edited my post with some more suggestions to try first

ameinild said:
I edited my post with some more suggestions to try first
Click to expand...
Click to collapse
yup, the image i tried a few.. even tried stock rom image.
tried both nexus 7 toolkit
as well as wugs nexus root tool kit.
they all seem to encounter problems when trying to "push" the rom images in or something.
is there a way to like format the entire thing and install from scratch>?

hamiksu said:
is there a way to like format the entire thing and install from scratch>?
Click to expand...
Click to collapse
Sorry, I can't really find anything for the N7... Hope someone else can chime in.

ameinild said:
Sorry, I can't really find anything for the N7... Hope someone else can chime in.
Click to expand...
Click to collapse
Yea, I hope someone will pop in and be my guardian angel too..
Thanks again, Ameinild

tried to flash stock rom using wug's rootkit..
this is what happens...

hamiksu said:
tried to flash stock rom using wug's rootkit..
this is what happens...
Click to expand...
Click to collapse
As a rule, don't do anything with a toolkit that you don't know how to do yourself with the relevant fastboot or ADB commands. It has a nasty tendency of leaving you in a lurch.
I noticed that your last run of Wug's toolkit did claim to successfully flash your recovery. Have you been able to access it from the fastboot menu on the device? If so, that's a major step forward.
Perhaps most importantly (based on your mentioning of tilapia earlier), are you 100% certain that you are trying to flash the factory image for your model of the Nexus 7?

Rirere said:
As a rule, don't do anything with a toolkit that you don't know how to do yourself with the relevant fastboot or ADB commands. It has a nasty tendency of leaving you in a lurch.
I noticed that your last run of Wug's toolkit did claim to successfully flash your recovery. Have you been able to access it from the fastboot menu on the device? If so, that's a major step forward.
Perhaps most importantly (based on your mentioning of tilapia earlier), are you 100% certain that you are trying to flash the factory image for your model of the Nexus 7?
Click to expand...
Click to collapse
Yes, I am absolutely sure it is the image for my nexus 7.. which is 3g/wifi model, not just wifi only..
image file is downloaded using wug's rootkit too..
file name = nakasig-jdq39-factory-0798439d.tgz
as the snapshot shows.. it keeps showing failed when "sending system"
please tell me you have an idea on why it keeps failing there...
*crosses fingers*
p.s :- after that (numerous) wug's toolkit attempt to flash back stock rom, I tried booting to recovery and it shows the android on its back with a red exclamation mark on its open body chasis

I'm assuming you haven't tried this yet, if you have tried this just ignore.
1 - Download - http://techerrata.com/file/twrp2/grouper/openrecovery-twrp-2.6.0.0-grouper.img
2 - fastboot flash recovery openrecovery-twrp-2.6.0.0-grouper.img
If flashes fine:
Power off Nexus, Hold Volume down and Power on, keep holding power down until you get to recovery.
Then:
Either - Get a USB OTG and put a ROM on a USB Stick, go to "install" - "Use external storage" find the rom and flash it.
or
Plug in to PC whilst in recovery, - Mount Storage - Now the Nexus should pop up on PC, Drag ROM to Nexus. Unmount and then try to flash.
Let me know how you get on with this.
Regards.

hamiksu said:
Yes, I am absolutely sure it is the image for my nexus 7.. which is 3g/wifi model, not just wifi only..
image file is downloaded using wug's rootkit too..
file name = nakasig-jdq39-factory-0798439d.tgz
as the snapshot shows.. it keeps showing failed when "sending system"
please tell me you have an idea on why it keeps failing there...
*crosses fingers*
p.s :- after that (numerous) wug's toolkit attempt to flash back stock rom, I tried booting to recovery and it shows the android on its back with a red exclamation mark on its open body chasis
Click to expand...
Click to collapse
That's because you have stock recovery installed now and it's unable to verify that your device is in working order, hence the red mark. Find TWRP for your device, download the .img and try to flash it with fastboot flash recovery <path-to-recovery.img>. Since you can at least get into a recovery, it's possible you'll be able to use onboard recovery tools to see what state your internal partitions are in.
Until there's a little more info available, there's nothing I can say that's not pure conjecture.

[Q] [HELP] Missing recovery 4.3

I was running TWRP with the franco kernel and stock rom on my nexus 4 4.2.2. When I got my OTA update notification, I did the needful and reverted back to stock rom and un rooted the phone using wugs root kit. Like wise the update was successful and I went about restoring all the backup's i created using wugs root kit 1.6.4.
Now the issue is after all this when I went about rooting the thus phone, I faced horrors for which I couldn't find exact answers on this forum. I want to flash TWRP 2.6 and to do that I went into fastboot and tried to flash it, but i keep getting an error saying "cannot load recovery.img: No error. And when I do try into get into the stock recovery then I get an image of fallen droid with a red exclamation mark and a message saying "No Command". Can anyone tell me what is the issue and how can i fix/workaround it..
Thank You:good:
EDIT: when I get the no command "fallen android" when i select recovery from the bootloader on pressing power+vol up does give me acces to the stock recovery. But even on using wug's 1.6.6 root kit I'm unable to root the device and install a custom recovery

Vikas Rao said:
I was running TWRP with the franco kernel and stock rom on my nexus 4 4.2.2. When I got my OTA update notification, I did the needful and reverted back to stock rom and un rooted the phone using wugs root kit. Like wise the update was successful and I went about restoring all the backup's i created using wugs root kit 1.6.4.
Now the issue is after all this when I went about rooting the thus phone, I faced horrors for which I couldn't find exact answers on this forum. I want to flash TWRP 2.6 and to do that I went into fastboot and tried to flash it, but i keep getting an error saying "cannot load recovery.img: No error. And when I do try into get into the stock recovery then I get an image of fallen droid with a red exclamation mark and a message saying "No Command". Can anyone tell me what is the issue and how can i fix/workaround it..
Thank You:good:
Click to expand...
Click to collapse
Have you tried redownloading twrp seems like a bad download?

yamani.m said:
Have you tried redownloading twrp seems like a bad download?
Click to expand...
Click to collapse
Tried Twrp, CWM and stock recovery too!! No luck, Still can't access recovery!
PS I tried to flash recovery buy using wug nrt which has not still been updated for JB 4.3 to begin with that is, later used fastboot

Vikas Rao said:
Tried Twrp, CWM and stock recovery too!! No luck, Still can't access recovery!
PS I tried to flash recovery buy using wug nrt which has not still been updated for JB 4.3 to begin with that is, later used fastboot
Click to expand...
Click to collapse
I would try to flash the full stock google image with fastboot and see what happens ?

Using fastboot to flash the recovery definitely works as I've done it, just have to make sure you use the right command:
fastboot flash recovery recovery.img
Make sure you're using the correct filename of the recovery image you have, I prefer to rename mine recovery.img so I can't get it wrong. Also make sure you're not putting recovery.img.img - sounds silly but people do do it!

EddyOS said:
Using fastboot to flash the recovery definitely works as I've done it, just have to make sure you use the right command:
fastboot flash recovery recovery.img
Make sure you're using the correct filename of the recovery image you have, I prefer to rename mine recovery.img so I can't get it wrong. Also make sure you're not putting recovery.img.img - sounds silly but people do do it!
Click to expand...
Click to collapse
I also did it this morning, works fine

EddyOS said:
Using fastboot to flash the recovery definitely works as I've done it, just have to make sure you use the right command:
fastboot flash recovery recovery.img
Make sure you're using the correct filename of the recovery image you have, I prefer to rename mine recovery.img so I can't get it wrong. Also make sure you're not putting recovery.img.img - sounds silly but people do do it!
Click to expand...
Click to collapse
Nope did the same thing! gives me the cannot load error, I just copy pasted the filename so can't go wrong there. And a stock rom flash is an option but the thing is i don't have a custom recovery nor root access for titanium backup don't wanna spend time again personalizing. I'm sure there is a simpler way.