Database Users

Zpad v.1029 Clean

If coming from a GTab build, you must wipe data/cache. Otherwise you will have FC's or UID mismatches.
This is an update.zip full update to Zpad v.1029. Based off Roebeet's build with Market and Google apps. Flashes system, (Bekits clockwork 0.7)recovery, and boot.
Rooted
Removed all unusable apks.
Removed zpad launcher, replaced with Launcher2.apk
Added Gallery3D
Added Music Mod
Added Superuser, su, and busybox
-v0.2-
0.8 Clockworkmod recovery thanks to Bekit
More stock apps: email, deskclock, search
Working YouTube
Dolphin HD browser
Applanet(full market)
Updated superuser.apk
Build.Prop tweak for UI
TapNTap keboard
-v0.3-
Fixed Live Wallpaper
Stock Settings via gmcbay
Android boot animation
Removed blackmarketapp, easily found and not in the purpose of this build
-1106 boot.img (flash over 0.3)-
Fixes time/date reset issue
Some ZPad applications remain that aren't terrible, and browser because it is tied with framework. This is stable, no wifi issues, and fast. Let me know if you have any problems.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
0.1 Download: OLD
0.2 Download: OLD
0.3 Download: http://www.megaupload.com/?d=ST5E1F63
1106 boot.img: http://www.megaupload.com/?d=6YUAG5IV
Installation:
Place update.zip in sdcard.
Run update.zip from clockworkmod recovery.
If running zpad or gtab recovery, unpack recovery.rar to sdcard. Then reboot in recovery mode by holding + and power.
Recommended Changes:
Speed up animations in spareparts
Speed up scrolling in advanced if using LauncherPro

Saved for additional growth.

I didn't see the link to v.1029 but I did see it over at tegratabs. Also you mention in the post over there that flash does not work? does that mean the flash apk from the folio does not work with this build... that would keep me from installing from the 1106 update...
And lastly just to echo so many others, Thanks for your hard work on tracking this stuff down and packaging it up... you have really helped make an unusable device quite awesome.
...John.

eagle17 said:
I didn't see the link to v.1029 but I did see it over at tegratabs. Also you mention in the post over there that flash does not work? does that mean the flash apk from the folio does not work with this build... that would keep me from installing from the 1106 update...
And lastly just to echo so many others, Thanks for your hard work on tracking this stuff down and packaging it up... you have really helped make an unusable device quite awesome.
...John.
Click to expand...
Click to collapse
Sorry, that is from early on when we did not have the flash apk. Maybe I'll add that to a new build if I get a chance. I have been working on getting the next version of zpad which should have flash stock.
You can definitely use flash on zpad if you add it yourself.

Do I need to flash .01 thru .03 and the 1106 or just .03 and the 1106?
Also over at tegra.com board there is a very easy way to flash clockwork onto this badboy, it is the last post in the clockwork thread posted by photonmedia

I think if you use the v.1029 update.zip it has everything... otherwise I did the .3 and then the 1106.. and then just copied the flash apk and ran it to install it.
I am very happy with this so far... very stable
@Rothnic ,
is the v.1029 the same as 1106 update?
thanks

Links are temporarily unavailable

I'm having a problem with the 1106, it is saying that the boot.img is corrupt and wrong crc #? Anyone know what to do?

bjn813 said:
I'm having a problem with the 1106, it is saying that the boot.img is corrupt and wrong crc #? Anyone know what to do?
Click to expand...
Click to collapse
what steps are you using?
what are you flashing from ?
are you using cwm?

Yes I'm CWM 8, I'm using the install from sdcard then choose update.zip, I choose the one I want. Then it says "assert failed: package_extract_file("boot.img", "/tmp/boot.img")
Error in sdcard/update.zip
(status 7)

bjn813 said:
Yes I'm CWM 8, I'm using the install from sdcard then choose update.zip, I choose the one I want. Then it says "assert failed: package_extract_file("boot.img", "/tmp/boot.img")
Error in sdcard/update.zip
(status 7)
Click to expand...
Click to collapse
It sounds like something is messed up with either the update or clockwork. I'd try reapplying clockwork recovery and redownloading the update.zip.

eagle17 said:
I think if you use the v.1029 update.zip it has everything... otherwise I did the .3 and then the 1106.. and then just copied the flash apk and ran it to install it.
I am very happy with this so far... very stable
@Rothnic ,
is the v.1029 the same as 1106 update?
thanks
Click to expand...
Click to collapse
v.1029 is a total package of v.1029 boot.img plus system.img. Zpad Clean 0.3 is just a cleaned up version of this total package.
I only have the 1106 boot.img at the moment that still works with the v.1029 system.img. I am working on getting the whole 1106 firmware.
One option you can do is take the 1106 boot.img and paste it into the update.zip for v.1029 Zpad Clean 0.3.

rothnic said:
One option you can do is take the 1106 boot.img and paste it into the update.zip for v.1029 Zpad Clean 0.3.
Click to expand...
Click to collapse
That is what I tried and that is where I get the error that it is corrupt and the bad CRC #(all 0's) using winrar. I am using my work computer and if you know about Altiris it won't even let me use the Altiris Image Explorer on it the boot.img

hopefully here someone can help me out, anyone got a link to that specific task manager, i cant seem to find it on the market?

Wipe Data/Cache
I'm sure this is obvious to many of you, but what exactly is meant by "you must wipe data/cache"? What specific action do I need to take -- is there a menu option in recovery mode or is this something I need to do from the Settings menu in the TapNTap interface?

biffripken said:
I'm sure this is obvious to many of you, but what exactly is meant by "you must wipe data/cache"? What specific action do I need to take -- is there a menu option in recovery mode or is this something I need to do from the Settings menu in the TapNTap interface?
Click to expand...
Click to collapse
in clockworkmod recovery these are things you do before flashing a new rom.

Got it now, don't know what was going on with it going on my computer to tablet. I just downloaded straight to tablet and moved the zip to the root of the internal sdcard and it worked. Also has anyone ran benchmark with this rom cause I did and its not very good 525. Anymore possible tweaks/lag fix coming?

bjn813 said:
Also has anyone ran benchmark with this rom cause I did and its not very good 525. Anymore possible tweaks/lag fix coming?
Click to expand...
Click to collapse
i think that has to do with the drivers being young - the tegra2 hardware is really new. the only other rom that is "fast" is cyanogenmod and i don't think it will bench much higher.

bjn813 said:
Got it now, don't know what was going on with it going on my computer to tablet. I just downloaded straight to tablet and moved the zip to the root of the internal sdcard and it worked. Also has anyone ran benchmark with this rom cause I did and its not very good 525. Anymore possible tweaks/lag fix coming?
Click to expand...
Click to collapse
That shouldn't be a quadrant score. Those tend to be in the 1800+ range.

1106
Sorry for the Noob question but how exactly to I "flash" the 1106 boot.img file? I've successfully installed the v.03 update and everything's fine except the time/date resets on reboot. Just can't seem to figure out how to do the next step
Also, has anyone tried the Subsonic app? Can't get it to work on this version although it did work on TnT Lite. It's the best app I've seen so far for streaming music from my home server, both home and away on all our devices (iTouch, DX, and now Gtab.)
I do appreciate the hard work everyone on these forums has provided with customizing this tab and helping with problems. Man this tablet would be 100x better if some of the folks on this forum and the tegra forum were involved in getting this tab developed. Here's hoping that Viewsonic provides us with a decent firmware update.
Tony

[Nandroid Backup] XXDLH4 Jelly Bean 4.1.1

Dropbox download: http://db.tt/dCJgN48P
Google Drive download: https://docs.google.com/open?id=0B03kuDevWNTFcE1PUXFSMDVtVkU
Multiupload download: http://www.multiupload.nl/8Y1Y73LUC1
Read instructions before ask silly questions!
This is the latest Jelly Bean Leak.
Lots of the users couldn't install the OTA, so here's the full version.
How to install:
Extract the zip in SDCard --> clockworkmod --> folder (for example JB) --> files here
Go to CWM --> Backup & Restore --> Restore from internal storage
The ROM is NOT rooted.
You should root it yourself.
Enjoy
MODEM XXDLH4: http://developer.clockworkmod.com/downloads/51/3572/radio-LH4-i9300-signed.zip (thanks to Cyanogenmod)
Please say thanks If this helped you!
Edit: I recommend you to wipe dalvik cache, battery stats & cache partition before you run the rom (for best smoothness and no FC)
Edit 2: If for some reason you can't find clockworkmod folder (to restore the backup), make a new backup and then replace the files from your backup with the files from the ZIP I provided.
Edit 3: MD5 checksum mismatch only happens when you try to install the whole zip file which is wrong! Extract like it's stated in the instructions.
Edit 4: I use some settings on stock that makes it faster for me:
- Disabling all animations in developer settings (or at least 0.5 to windows animation)
- Deleting all widgets from the homescreen
- Disable S Voice launch by homescreen and voice turnon (drain battery)
- Freezing/uninstalling all stock bloatware (with Root Uninstaller Pro) [AllShare, Google+, Yahoo News, Weather, Samsung Apps, Video Hub, Music Hub, etc etc]
- GPU rendering
490 MB Free RAM at final
Edit 5: You can restore this backup on every rom you want.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits: samsung-updates.com (for the hard-OTA-install)

Nice one!

Few users already reported it's working. Enjoy :laugh:

Rooted :> ?

Jack Barrett said:
Few users already reported it's working. Enjoy :laugh:
Click to expand...
Click to collapse
yup, working flawless.. do u have tried LH4 Modem??

So does this cut out flashing stock rom via odin etc? I usually just *2767*3855# to clean up then flash a rom in cwm.
Sent from my GT-I9300 using xda premium

kdogguk said:
So does this cut out flashing stock rom via odin etc? I usually just *2767*3855# to clean up then flash a rom in cwm.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Yes, you can flash it straight forward after wipe your old rom.
But if you have any EXT4 mods then you need to flash stock rom first.

So I don't get it.. what's the difference between DLH4 and BLH4
Sent from my Nexus 7 using Tapatalk 2

Thanx.

kdogguk said:
So does this cut out flashing stock rom via odin etc? I usually just *2767*3855# to clean up then flash a rom in cwm.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
This CANNOT be flashed with Odin. Only CWM with the instructions I've written.

YoungAceAtlanta said:
So I don't get it.. what's the difference between DLH4 and BLH4
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
It's the same ROM. The author wrote BLH for some reason.

Thanks mate. Did you find out if it's rooted?
Sent from my GT-I9300 using xda premium

when i choose to restore, it keeps saying it can't find any files, not sure what I'm doing wrong. its on the root of my internal storage, and i also put it in the clockworkmod folder and it can't find the backup

yaro014 said:
Rooted :> ?
Click to expand...
Click to collapse
Not rooted.

. . / Please delete

Kutthoat5150 said:
when i choose to restore, it keeps saying it can't find any files, not sure what I'm doing wrong. its on the root of my internal storage, and i also put it in the clockworkmod folder and it can't find the backup
Click to expand...
Click to collapse
Try with advanced restore.

yaro014 said:
This one is full rom and its OTA which mean this supposed to be more stable
The old one is just a part of the rom. Its not complete = unstable at all
Click to expand...
Click to collapse
This one is full room LG8 + OTA updated to Jelly Bean XXDLH4, restored to factory settings, cleaned cache and packed as nandroid backup.
Lots of people had problems installing the OTA (including myself).
That's why I made it so people can enjoy it faster without spent nerves.

Jack Barrett said:
This one is full room LG8 + OTA updated to Jelly Bean XXDLH4, restored to factory settings, cleaned cache and packed as nandroid backup.
Lots of people had problems installing the OTA (including myself).
That's why I made it so people can enjoy it faster without spent nerves.
Click to expand...
Click to collapse
I thought hes asking about previous leak compares to this one.. anyway.. my fault

Jack Barrett said:
Try with advanced restore.
Click to expand...
Click to collapse
still can't find any files, I just place the Zip files in my root folder correct? or do i need to extract the files from the zip

Do I install each of the 5 files individually? e.g. system, img etc? Thank you.

[Utility] Desktop Rom Flasher!! (Drag Drop & Flash!)

Hello everyone, so I developed a small application called Desktop Flasher. All you need to do is drag the zip you want to flash and it'll automatically push it to your phone, write the appropriate script, and reboot you into recovery, and perform the flashing procedure. I hope to add new features (wireless support) as time goes on. Try it out and tell me what you think
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Drag Drop and Flash
Wipe Cache/Dalvik and Data
Changelog:
1.0
Initial Release
1.1
Minor Bug Fixes
Incorporated Silent Updater
1.2
Fixed Permission Issue
1.3
Created First Time Run Program to avoid any setup issues
Auto renames zips with spaces in their title
1.4
Small adjustment
Confirmed working on TWRP and CWM, I have not tested any other recovery, but it still should work the same. Please report back your findings.
Download and Extract the attached zip, and run Desktop Flasher.exe to launch,
When Launching the App for the very first time, I highly recommend that you update it to avoid any potential problems.
To Update the App just open it, and close it (via the usual x or exit button).
Source code: https://dl.dropboxusercontent.com/u/9134840/Desktop Flasher/Desktop Flasher.zip

FAQ
I get a failed to push script/or during the first run program it can't detect my device in recovery mode!
You probably don't have the drivers installed for adb in recovery mode. It's easy though! Follow this quick guide here: http://forum.xda-developers.com/showthread.php?t=1379875
Okay, so the program says "Great your Phone will do the rest" and my phone reboots into recovery, but nothing happens...wth??
Most likely the issue is that you're using a recovery that doesn't support openrecoveryscripting. (The official version of CWM and TWRP do)

How to connect device ? ... is debug mode?

phamtlsoft said:
How to connect device ? ... is debug mode?
Click to expand...
Click to collapse
Yes, just make sure USB debugging is on, and your drivers are already installed.

will it work with a Galaxy Note
Custom Rom and cwm
I made a few themes and had always to copy over the zips and flash them via phone
so I would be really happy if it will work on my device
sent from my G-Note

hara74 said:
will it work with a Galaxy Note
Custom Rom and cwm
I made a few themes and had always to copy over the zips and flash them via phone
so I would be really happy if it will work on my device
sent from my G-Note
Click to expand...
Click to collapse
Cool. Yeah this should work on any device, I and any recovery with Openscript available (TWRP and CWM). I haven't tested cwm but I can confirm that it works on TWRP.

filmaker said:
Cool. Yeah this should work on any device, I and any recovery with Openscript available (TWRP and CWM). I haven't tested cwm but I can confirm that it works on TWRP.
Click to expand...
Click to collapse
ok, thanks for ur answer
I'll give it a try and report the result
sent from my G-Note

when I drag&drop a zip,
it comes that massage: "Failed to Push Zip to SDcard"

hara74 said:
when I drag&drop a zip,
it comes that massage: "Failed to Push Zip to SDcard"
Click to expand...
Click to collapse
Hmmm...alright. Your phone is connected and USB debugging is enabled?

filmaker said:
Hmmm...alright. Your phone is connected and USB debugging is enabled?
Click to expand...
Click to collapse
yes
sent from my G-Note

hara74 said:
yes
sent from my G-Note
Click to expand...
Click to collapse
Alright, I think I figured it out. Does the location you're dropping from or the zip itself happen to have any "spaces" in the name? E.X. D:\documents\my rom\rom.zip

the zip definitely not,
but I look at folder on pc tomorrow,
now it's off already
will report then
sent from my G-Note

Alright Cool.
Released a new update, it'll fix possible flash errors in recovery.

jup, it was the spaces in the zip :good:
but now it shows: Failed to push Script
the files are copied to phone correctly

hara74 said:
jup, it was the spaces in the zip :good:
but now it shows: Failed to push Script
the files are copied to phone correctly
Click to expand...
Click to collapse
Okay, I just released an update that'll fix it. To update the program just open it, then hit the exit button, and it'll update. The problem was with some devices you can't push to /cache unless you're in recovery. When I'm running sense it works fine, but whenever I switch to AOSP, I would run into that issue. Fixed now

I used the new one v1.1
sorry, I just saw there's a 1.2
will try it again
sent from my G-Note
---------- Post added at 06:59 PM ---------- Previous post was at 06:51 PM ----------
I just tried it with the new 1.2,
but unfortunately it booted into recovery without doing anything else,
it´s like I would boot into recovery manually
then after a few seconds it pops up again: Failed to push Script :crying: :crying: :crying:

hara74 said:
I used the new one v1.1
sorry, I just saw there's a 1.2
will try it again
sent from my G-Note
---------- Post added at 06:59 PM ---------- Previous post was at 06:51 PM ----------
I just tried it with the new 1.2,
but unfortunately it booted into recovery without doing anything else,
it´s like I would boot into recovery manually
then after a few seconds it pops up again: Failed to push Script :crying: :crying: :crying:
Click to expand...
Click to collapse
Hmmm...alright. Lol thanks for being my only dignified tester haha. Okay, can you do me a favor. Download the zip I attached to this post, and run the recovery.bat file. (It'll reboot your device into recovery and attempt to push a file to your cache after a 25 second delay) and can you tell me the output. (Whether it pushes or gives a permission error) Thanks.

no problem m8,
I'm lucky to test a tool which helps me later
I'll test it later, bcs I have to watch a horror movie right now,
order from boss (my wife)
sent from my G-Note

I downloaded ur zip, extracted it and run the bat, but that´s the result:
it didn´t anything with my phone

hara74 said:
I downloaded ur zip, extracted it and run the bat, but that´s the result:
View attachment 2163004View attachment 2163005
it didn´t anything with my phone
Click to expand...
Click to collapse
Ooops, sorry forgot to throw in adb. Now try it.

[RECOVERY] TWRP 2.6.x.x For Xolo Q700/Q700i

Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshots:
​
Disclaimer: Do not install this if you don't know what you are doing. Incorrect flashing of a recovery can lead to a hard brick! Bugs in the recovery could result in data loss so always have a backup! I am in no way responsible for anything you do to your phone and offer no guarantees.
XDA:DevDB Information
TeamWin Recovery Project For Xolo Q700/Q700i, Tool/Utility for the Xolo Q700, Q700i
Contributors
A N D Y, bgos10, abhinav2hd
Version Information
Status: Stable
Current Stable Version: 2.6.3.0
Stable Release Date: 2014-06-29
Created 2014-06-29
Last Updated 2014-06-30

FEATURES:
Graphical touchscreen interface with buttons and drag-to-scroll!
Compressed backups that can save you up to 50% disk space
Ability to choose which partitions to back up and which to restore
Custom names for backups, rename and delete backups inside recovery
Integrated Terminal Emulator
Install queues allow you to install multiple zips in one go (e.g. CM9 zip together with gapps zip)
Easy one-button cache & dalvik cache clearing after an installation
Recovery settings are saved to the sdcard and persist through reboots
File Manager that allows you to move, copy, delete and rename files and change their permissions
Battery percentage indicator, charging indicator and clock (set your timezone in settings!)
Reboot into download mode (bootloader)
ADB support
Sideloading for automated ROM install
Detailed logfile
Themeable
CHANGELOG for 2.6.3.0:
-Proper backup and restore of SELinux contexts (thanks to Tassadar)
-Pull in some ROM information for backup name generation
-Merge all recent patches from AOSP bringing TWRP up to date with Android 4.3
-Add 1200x1920 theme (thanks to Tassadar)
-A few other fixes and tweaks
I have tried to test all recovery features and they all seem to work. I successfully flashed several different ROMs and performed backups and restores. However, there could still be bugs lurking somewhere - if you find one please report it!
DOWNLOAD:
Get from Dev-Host
INSTALLATION:
Method 1: (Typical) (No Root Req.)
Install VCOM Drivers.(Skip if already installed) Download Here
Download And Extract SP Flash tool, tested version.(Skip if already got it) Download Here
Download and Extract the Recovery from the above link.
Load Scatter-File, tick "RECOVERY" then click on Download Button.
Take battery out of your device and connect the device when the download process is on.
Wait till it finish, first RED line comes then YELLOW line.
Now it's finished, use Recovery Combination i.e. Volume Up + Power.
You will see, curtain of TWRP after the XOLO logo.
Congrats You Installed TWRP 2.6.3.0.
Method 2: (Most Easiest) (Root Req.)
Root Your Q700/Q700i.
Download MobileUncleTool from Play Store
Extract recovery.img from the RAR Archive
Paste it into Root of SD card.
Update Recovery using Mobile Uncle Tools
Choose "recovery.img" from the sdcard
Update it and reboot into Recovery
Enjoy!

A N D Y said:
FEATURES:
Graphical touchscreen interface with buttons and drag-to-scroll!
Compressed backups that can save you up to 50% disk space
Ability to choose which partitions to back up and which to restore
Custom names for backups, rename and delete backups inside recovery
Integrated Terminal Emulator
Install queues allow you to install multiple zips in one go (e.g. CM9 zip together with gapps zip)
Easy one-button cache & dalvik cache clearing after an installation
Recovery settings are saved to the sdcard and persist through reboots
File Manager that allows you to move, copy, delete and rename files and change their permissions
Battery percentage indicator, charging indicator and clock (set your timezone in settings!)
Reboot into download mode (bootloader)
ADB support
Sideloading for automated ROM install
Detailed logfile
Themeable
CHANGELOG for 2.6.3.0:
-Proper backup and restore of SELinux contexts (thanks to Tassadar)
-Pull in some ROM information for backup name generation
-Merge all recent patches from AOSP bringing TWRP up to date with Android 4.3
-Add 1200x1920 theme (thanks to Tassadar)
-A few other fixes and tweaks
I have tried to test all recovery features and they all seem to work. I successfully flashed several different ROMs and performed backups and restores. However, there could still be bugs lurking somewhere - if you find one please report it!
DOWNLOAD:
Get from Dev-Host
INSTALLATION:
Method 1: (Typical) (No Root Req.)
Install VCOM Drivers.(Skip if already installed) Download Here
Download And Extract SP Flash tool, tested version.(Skip if already got it) Download Here
Download and Extract the Recovery from the above link.
Load Scatter-File, tick "RECOVERY" then click on Download Button.
Take battery out of your device and connect the device when the download process is on.
Wait till it finish, first RED line comes then YELLOW line.
Now it's finished, use Recovery Combination i.e. Volume Up + Power.
You will see, curtain of TWRP after the XOLO logo.
Congrats You Installed TWRP 2.6.3.0.
Method 2: (Most Easiest) (Root Req.)
Root Your Q700/Q700i.
Download MobileUncleTool from Play Store
Extract recovery.img from the RAR Archive
Paste it into Root of SD card.
Update Recovery using Mobile Uncle Tools
Choose "recovery.img" from the sdcard
Update it and reboot into Recovery
Enjoy!
Click to expand...
Click to collapse
Faadu Work bro.
Correction needed:-You have compiled 2.6.3.0.Correct it.

nightwalker said:
Faadu Work bro.
Correction needed:-You have compiled 2.6.3.0.Correct it.
Click to expand...
Click to collapse
Thanks for correcting!

A N D Y said:
Thanks for correcting!
Click to expand...
Click to collapse
Anytime bro :wink:

Good Work, Ported or Compiled?

abhinav2hd said:
Good Work, Ported or Compiled?
Click to expand...
Click to collapse
Compiled

working fine bro but sum times when i restore any rom sum apps gone missing which i installed manually ..................

virgoguy07 said:
working fine bro but sum times when i restore any rom sum apps gone missing which i installed manually ..................
Click to expand...
Click to collapse
That may be due to apps in sdcard (.android_secure), so if it deletes you can get those back after restoring.

Q700s
does this support in q700s??

Hi,
I have never done this before but I want to falsh recovery ROM on my XOLO Q700. I have rooted my phone yesterday with King O Root. I searched for Mobile Uncle tools in goolge play store but I could not find it. I just want to know is there any alternative App to Mobile Uncle Tools? I also want to know which is better for recovery option for XOLO Q700, CWM or TWRP?

[ROM] fRomFuture - Stock Rom L29 (B179)

Welcome to fRomFuture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Base B179
Busybox
prerootet with Magisk
Viper4Android
light debloadet
VoLTE (if you provider support it)
More clone apps
3D Panorama Camera
Install when you coming from Stock encrypted:
Backup your Data
Unlock bootloader
install TWRP (Download)
Backup Stock with TWRP (System,Cust,Version,Product,Vendor, OEM Info)
Wipe System,Cust,Version,Product,Vendor in TWRP
Format Data Partition (type YES)
Copy Rom and Data Files to your Phone
install Rom
L29C432 can reboot now
install Data Files L09C432
Reboot and have fun
Install when you coming from Custom Rom decrypted:
Backup Data with TWRP
Wipe System,Cust,Version,Product,Vendor in TWRP
install Rom
L29C432 can reboot now
install Data Files L09C432 (B164 is fine)
Reboot and have fun
Its only tested with VTR-L29C432xx so if you want this Rom please rebrand to L29C432!
Klick here to rebrand
DOWNLOAD B179 - Magisk
Spoiler
DOWNLOAD B164 SuperSu
DOWNLOAD B164 Magisk
Datafiles B164
Datafiles L09 B164
Some user lost all data from internal storage while they update magisk!
Take care and make a backup before you update magisk.
Androidfilehost dont have a P10 Folder yet. So its ok downloading this file
A very big thanks to @funiewski for a lot of testing :good:
Credits to:
tecalote
tkkg1984
chainfire
guitardedhero
Disclaimer: I will not take any responsibility for anything wrong happen to your device. Do it at your own risk.

only for dual sim version?

Yes. Maybe later a L09 Version.

Are there any solution for us to solve these probelms ?

@Blackball - is SuperSu you use in this rom modified in any way?

What problems? @Jamsserty
@funiewski
Yes it's modified

Blackball said:
What problems? @Jamsserty
@funiewski
Yes it's modified
Click to expand...
Click to collapse
During testing when I flashed back to stock b164 I used unmodified Ssu beta 3 for rooting, there is one user in Ssu beta thread who has problems with latest beta on his p10. What kind of modification if I may ask?

A friend of mine made the modifications. (@tecolate) take a look here:
https://forum.xda-developers.com/showthread.php?t=3612258

Blackball said:
A friend of mine made the modifications. (@tecolate) take a look here:
https://forum.xda-developers.com/showthread.php?t=3612258
Click to expand...
Click to collapse
huawei should have a cross development forum thread like sony devices, it would be easier to find relevant information, I have to flash back to stock and root with beta 3, I don't remember any problems on my side, he has problems with security(pin code, fingerprint).

Hi There.
Succesfully installed. I have issues with the Gallery.. If I open it it says insufficient storage space....
Also MiXplorer shows what looks like encrypted folders in the Internal Storage section???
Any help would be appreciated.

Did you format your data partition before you flashed this?

Pretty nice
So it seems that installing and flashing Huawei devices is quite the hassle.
Issues I currently experience on this ROM:
Cannot open Gplay not opening.
Plugging in usb cable into windows or linux doesn't get recognised.
I will update with more details later today
update:
reformatted /data /system and reinstalled, no more issues!
Rom works fine, as fine as could be expected of a rooted stock rom.

Here is a script for L09 User.
Just install Rom and Data Files from start post and then this zip file.
Its untested because my tester have only L29 devices. But it should work.
https://www.androidfilehost.com/?fid=889764386195923928

Hello
How i can activate voLTE?

Added Magisk Version.
Have fun.
A very big thanks to @funiewski for a lot of testing

Have installed and all is working great. There's only 1 issue that I'm facing. The first time I change my wallpaper on the homescreen, there are many lines that will appear on the wallpaper. Anyone facing this? The lockscreen and app drawer area is fine. Anyone can advice? I would prefer my home screen wallpaper to be clean.

Blackball said:
Did you format your data partition before you flashed this?
Click to expand...
Click to collapse
Yeah that was it... Figured it out myself... Realised I missed something somewhere.
So far the Rom is running great!

When I open Magisk Manager and try to install Magisk, I get an error that the zip file could not be extracted.
Any ideas?

Check the MagiskManager Folder. Is there the zip?

Blackball said:
Check the MagiskManager Folder. Is there the zip?
Click to expand...
Click to collapse
Yes it's there.
Can extract it as well with Mixplorer.
Should I flash the zip via TWRP?