Doh! another one here with a brick. Can you solve this one?! - G2 Q&A, Help & Troubleshooting

here goes...
Accepted an OTA from LG while running Rayglobe.
Stuck in CWM boot loop.
Cannot restore nandroid or install any zip from the sd card.
Managed to get adb and entered the command below, but still stuck in the CWM loop.
Here's what happens
C:\Users\WIN 7 HP>adb shell
dd if=/dev/block/platform/msm_sdcc.1/by-name/fota of=/sdcard/fota-backup.img
~dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota # dd if=/dev/blo
ck/platform/msm_sdcc.1/by-name/fota of=/sdcard/fota-backup.img
65536+0 records in
65536+0 records out
33554432 bytes (32.0MB) copied, 0.623509 seconds, 51.3MB/s
~ #
can you see whats wrong?
Many thanks

Any make sense of this for me? the poor phone is dead

mwatson said:
Any make sense of this for me? the poor phone is dead
Click to expand...
Click to collapse
install your recovery of choice again. or of your recovery still works, wipe and install your rom of choice again.

mwatson said:
here goes...
Accepted an OTA from LG while running Rayglobe.
Stuck in CWM boot loop.
Cannot restore nandroid or install any zip from the sd card.
Managed to get adb and entered the command below, but still stuck in the CWM loop.
Here's what happens
C:\Users\WIN 7 HP>adb shell
dd if=/dev/block/platform/msm_sdcc.1/by-name/fota of=/sdcard/fota-backup.img
~dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota # dd if=/dev/blo
ck/platform/msm_sdcc.1/by-name/fota of=/sdcard/fota-backup.img
65536+0 records in
65536+0 records out
33554432 bytes (32.0MB) copied, 0.623509 seconds, 51.3MB/s
~ #
can you see whats wrong?
Many thanks
Click to expand...
Click to collapse
here's what I did when I was in a very similar situation as you. I was using CWM and I got caught in the same boot loop I was trying to get into download mode. After doing some research you have to download TWR p on your computer and saiboat it.. (Sorry was using speak to text) you have to sideload twrp and then flash it.. Reboot the phone and it will be in twrp.. Then you can put it in download mode and flash stock ROM back on... Or you can sideload a ROM that you kbiw works and flash it.. You go to install on cwm and then look for install from sideload... Use adb to push IT.. Look up (can boot loop xea) on Google and there will be some very helpful post that will tell you exactly how to do what I'm saying

darkobas said:
install your recovery of choice again. or of your recovery still works, wipe and install your rom of choice again.
Click to expand...
Click to collapse
Thanks for your help.
My recovery still works, but when i install a zip from sd like rayglobe for instance, it goes through the aroma set up, reboots but goes straight back into CWM recovery. I get a message saying android-secure.img missing.
I also cannot install a nandroid back up

joewaz said:
here's what I did when I was in a very similar situation as you. I was using CWM and I got caught in the same boot loop I was trying to get into download mode. After doing some research you have to download TWR p on your computer and saiboat it.. (Sorry was using speak to text) you have to sideload twrp and then flash it.. Reboot the phone and it will be in twrp.. Then you can put it in download mode and flash stock ROM back on... Or you can sideload a ROM that you kbiw works and flash it.. You go to install on cwm and then look for install from sideload... Use adb to push IT.. Look up (can boot loop xea) on Google and there will be some very helpful post that will tell you exactly how to do what I'm saying
Click to expand...
Click to collapse
Thanks for your advice. I wasn't sure if you could flash one recovery on top of another.
If I cannot install a zip on CWM, do you think I will be able to with TWR?

mwatson said:
here goes...
Accepted an OTA from LG while running Rayglobe.
Stuck in CWM boot loop.
Cannot restore nandroid or install any zip from the sd card.
Managed to get adb and entered the command below, but still stuck in the CWM loop.
Here's what happens
C:\Users\WIN 7 HP>adb shell
dd if=/dev/block/platform/msm_sdcc.1/by-name/fota of=/sdcard/fota-backup.img
~dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota # dd if=/dev/blo
ck/platform/msm_sdcc.1/by-name/fota of=/sdcard/fota-backup.img
65536+0 records in
65536+0 records out
33554432 bytes (32.0MB) copied, 0.623509 seconds, 51.3MB/s
~ #
can you see whats wrong?
Many thanks
Click to expand...
Click to collapse
I ran into the same issue last night. This fixed it on my twrp recovery. I'm not sure how it works for CWM but if you're running through adb shell would it not be the same?
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
then hit enter
type
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
then hit enter and reboot.

Thanks for your help guys, I managed to install TWRP but now i'm stuck in a loop with TWRP instead of CWM.
I wiped and install Rayglobe, but i'm now in a different loop.
any fixes?

Did you try the post above yours?
Sent from my LG-D800 using Tapatalk

tdevaughn said:
Did you try the post above yours?
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Yes, just done that and its back in the room!
Thanks all, 5 days of stress over!:fingers-crossed:

coldcrush390 said:
I ran into the same issue last night. This fixed it on my twrp recovery. I'm not sure how it works for CWM but if you're running through adb shell would it not be the same?
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
then hit enter
type
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
then hit enter and reboot.
Click to expand...
Click to collapse
Where are you typing this? I tried in adb shell while in cwm and now i got twrp to flash and i'm stuck there. I go to advanced and terminal command and it's asking me to choose a file and bringing up my sdcard. I choose select and it open terminal and I entered everything but the phone just boots back to recovery.
mwatson said:
Thanks for your help guys, I managed to install TWRP but now i'm stuck in a loop with TWRP instead of CWM.
I wiped and install Rayglobe, but i'm now in a different loop.
any fixes?
Click to expand...
Click to collapse
I'm in the same situation.
mwatson said:
Yes, just done that and its back in the room!
Thanks all, 5 days of stress over!:fingers-crossed:
Click to expand...
Click to collapse
so how did you do it! My cousin is stressing and I'm stumped as how to fix this.
[UPDATE]
He got it working. He was putting a space after the period and before the 1 so it wasnt working. Once entered correctly the phone booted fine.

imucarmen said:
Where are you typing this? I tried in adb shell while in cwm and now i got twrp to flash and i'm stuck there. I go to advanced and terminal command and it's asking me to choose a file and bringing up my sdcard. I choose select and it open terminal and I entered everything but the phone just boots back to recovery.
I'm in the same situation.
so how did you do it! My cousin is stressing and I'm stumped as how to fix this.
[UPDATE]
He got it working. He was putting a space after the period and before the 1 so it wasnt working. Once entered correctly the phone booted fine.
Click to expand...
Click to collapse
I did that too. I saw what i did wrong and re entered. Glad he got it fixed.

coldcrush390 said:
I ran into the same issue last night. This fixed it on my twrp recovery. I'm not sure how it works for CWM but if you're running through adb shell would it not be the same?
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
then hit enter
type
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
then hit enter and reboot.
Click to expand...
Click to collapse
Only overwriting fota did not work for me. I had to do it to misc as well. Cheers.

Related

Bootloop after OTA Attempt

Just got asked to make system update via tmobile OTA on my stock rom rooted lg lg2 d801 ? which is weird im on the latest update besides have 4.4 but unfortunately when i restarted to install via on screen instructions it rebooted to twrp and now it wont go to system everytime i restarts it go straight to twrp... wtfff lol
EDIT:Fixed via terminal command in twrp
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
then hit enter
type
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
then hit enter and reboot.
mak213 said:
Just got asked to make system update via tmobile OTA on my stock rom rooted lg lg2 d801 ? which is weird im on the latest update besides have 4.4 but unfortunately when i restarted to install via on screen instructions it rebooted to twrp and now it wont go to system everytime i restarts it go straight to twrp... wtfff lol
EDIT:Fixed via terminal command in twrp
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
then hit enter
type
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
then hit enter and reboot.
Click to expand...
Click to collapse
This worked perfectly. I just got the update also on the same ROM as you. Thank you for the info.
Droidz said:
This worked perfectly. I just got the update also on the same ROM as you. Thank you for the info.
Click to expand...
Click to collapse
glad i could help
Does that mean if i get an update and if i am on stock rooted room and i end up in a boot loop i can install the rom and rely on this command line if things go wrong ?
Sent from my LG-D802 using xda app-developers app
mak213 said:
Just got asked to make system update via tmobile OTA on my stock rom rooted lg lg2 d801 ? which is weird im on the latest update besides have 4.4 but unfortunately when i restarted to install via on screen instructions it rebooted to twrp and now it wont go to system everytime i restarts it go straight to twrp... wtfff lol
EDIT:Fixed via terminal command in twrp
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
then hit enter
type
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
then hit enter and reboot.
Click to expand...
Click to collapse
Any idea how I'd pull this off from CWM? I'm in the same boat but can't seem to get storage mounted or adb.
w00t
I wasn't able to get ADB on my windows VM, but just managed to get it on OS X and this worked perfectly. Thanks so much!

[Q] Is it possible to repair my installation post official updating?

So I did a number on my phone in a half asleep stupor I allowed an official update to go through while running a custom recovery and debloated kitkat. I can't believe I did this to myself. Is there anyway to repair the installation other than wiping the phone again? It was one of those mini updates, but now I boot straight to recovery instead of the operating system.
I am in the same boat you are man. I hit update now instead of later and the phone reboot into recovery and won't boot the ROM. I tried restoring a previous backup with no luck. I'm on a rooted stock ROM running twrp 2.7. Hope someone can shed some light on this.
I found an answer!
Gnex81 said:
I am in the same boat you are man. I hit update now instead of later and the phone reboot into recovery and won't boot the ROM. I tried restoring a previous backup with no luck. I'm on a rooted stock ROM running twrp 2.7. Hope someone can shed some light on this.
Click to expand...
Click to collapse
I found the answer in another thread after an exhaustive search. Serious thanks goes out to the user 6ril1
6ril1 said:
Have you typed the two commands in TWRP
Code:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
and
Code:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
?
Click to expand...
Click to collapse
Here is the thread:
[FIX] Installed TWRP and now you're stuck after OTA?
So here is what you do:
1) Boot into recovery (TWRP)
2) Go to Advanced and then Terminal Command
3) VERY CAREFULLY TYPE IN EXACTLY THIS:
"dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota" then RETURN
"dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc" then RETURN
Reboot and it should have fixed it up for you.

When Android Keep Booting Into TWRP Recovery

Thousands of android users having this problem, when you install custom ROM and then you try to reset your phone; it keep rebooting into TWRP recovery (not system), even after you flash your ROM again.
So here's the solution: https://www.youtube.com/watch?v=vSWC5MAB5cE
bhattyash32 said:
Thousands of android users having this problem, when you install custom ROM and then you try to reset your phone; it keep rebooting into TWRP recovery (not system), even after you flash your ROM again.
So here's the solution:
Click to expand...
Click to collapse
Seems to happen a lot with people. Could others chime in on this solution?
Sent from my LGE LG-H830 using XDA Labs
Nick216ohio said:
Seems to happen a lot with people. Could others chime in on this solution?
Click to expand...
Click to collapse
I got my phone less than 24 hrs ago and have dealt with this the entire time. Not only do I get stuck in recovery but when I do use the terminal code to get out of it, I get stuck in reboots after any ROM installation. I have seen many users having both issues and find it hard to believe there hasn't been some kind of fix. I know not all are caused by the same thing but many I'm sure are.
Boot to TWRP recovery, open Terminal inside TWRP and type:
dd if=/dev/zero of=/dev/block/platform/soc/624000.ufshc/by-name/misc
dd if=/dev/zero of=/dev/block/platform/soc/624000.ufshc/by-name/fota
Than reboot.
(May in rare causes loose TWRP but u will get out loop - be patient takes sometimes 7 Minutes+ for boot up the ROM)
Worked for me.
jeffsga88 said:
Actually, you shouldn't use the above commands unless the following command doesn't work. That used to be the recommended method of getting out of TWRP, but it was realized that using the first command wipes your misc partition and then you end up with a Mac address that changes in every reboot (there is a temp fix for this I have a guide for). But anyways try to use the following to get out of TWRP bootloops:
Code:
dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc
Click to expand...
Click to collapse
4r44444 said:
Boot to TWRP recovery, open Terminal inside TWRP and type:
dd if=/dev/zero of=/dev/block/platform/soc/624000.ufshc/by-name/misc
dd if=/dev/zero of=/dev/block/platform/soc/624000.ufshc/by-name/fota
Than reboot.
(May in rare causes loose TWRP but u will get out loop - be patient takes sometimes 7 Minutes+ for boot up the ROM)
Worked for me.
Click to expand...
Click to collapse
Actually, you shouldn't use the above commands unless the following command doesn't work. That used to be the recommended method of getting out of TWRP, but it was realized that using the first command wipes your misc partition and then you end up with a Mac address that changes in every reboot (there is a temp fix for this I have a guide for). But anyways try to use the following to get out of TWRP bootloops:
Code:
dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc
jeffsga88 said:
Actually, you shouldn't use the above commands unless the following command doesn't work. That used to be the recommended method of getting out of TWRP, but it was realized that using the first command wipes your misc partition and then you end up with a Mac address that changes in every reboot (there is a temp fix for this I have a guide for). But anyways try to use the following to get out of TWRP bootloops:
Code:
dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc
Click to expand...
Click to collapse
Worked for me as well, funny thing was I almost didn't search thoroughly and was going to enter the other commands.
Ducter said:
Worked for me as well, funny thing was I almost didn't search thoroughly and was going to enter the other commands.
Click to expand...
Click to collapse
+1
jeffsga88 said:
Actually, you shouldn't use the above commands unless the following command doesn't work. That used to be the recommended method of getting out of TWRP, but it was realized that using the first command wipes your misc partition and then you end up with a Mac address that changes in every reboot (there is a temp fix for this I have a guide for). But anyways try to use the following to get out of TWRP bootloops:
Code:
dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc
Click to expand...
Click to collapse
I got in that Bootloop by doing a Factory Reset with Root and TWRP. Formatting and Flashing the LG-H85020D-Flashable.COMPLETE.zip just ended in TWRP again.
Your Command fixed that issue!
jeffsga88 said:
Actually, you shouldn't use the above commands unless the following command doesn't work. That used to be the recommended method of getting out of TWRP, but it was realized that using the first command wipes your misc partition and then you end up with a Mac address that changes in every reboot (there is a temp fix for this I have a guide for). But anyways try to use the following to get out of TWRP bootloops:
Code:
dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc
Click to expand...
Click to collapse
Thank you jeffsga88 your code worked!
Also here to give my thanks!
recovering from dding into soc devices...
@4r44444 , @jeffsga88, Thanks for the guidance here. I could get out of the TWRP recovery boot loop with the dd dumps to soc devices. You have saved my phone from bricking. Cheers for your great help and guidance to the community !!!
@jeffsga88 Where is this guide for fixing the misc parition properly? ""but it was realized that using the first command wipes your misc partition and then you end up with a Mac address that changes in every reboot (there is a temp fix for this I have a guide for)""
nitkam said:
@jeffsga88 Where is this guide for fixing the misc parition properly? ""but it was realized that using the first command wipes your misc partition and then you end up with a Mac address that changes in every reboot (there is a temp fix for this I have a guide for)""
Click to expand...
Click to collapse
The permanent fix is in the same thread as the temporary one, specifically THIS post
Nimueh said:
The permanent fix is in the same thread as the temporary one, specifically THIS post
Click to expand...
Click to collapse
Thanks for the link. It has made my almost dead phone working again.
I got stuck yesterday in that same loop your code worked for me thanks...
No such file or directory, HELP ME!! Code isn't work
nitkam said:
@4r44444
@jeffsga88 Where is this guide for fixing the misc parition properly? ""but it was realized that using the first command wipes your misc partition and then you end up with a Mac address that changes in every reboot (there is a temp fix for this I have a guide for)""
Click to expand...
Click to collapse
Yeah - be careful with this - I did this and bricked mine - it went from unable to boot into Android to unable to boot fullstop... eventually managed to get it restored to factory (using LGUP), but MAC addresses all reset to 0's on every reboot - so now need to run macchanger on every boot...
jeffsga88 said:
Actually, you shouldn't use the above commands unless the following command doesn't work. That used to be the recommended method of getting out of TWRP, but it was realized that using the first command wipes your misc partition and then you end up with a Mac address that changes in every reboot (there is a temp fix for this I have a guide for). But anyways try to use the following to get out of TWRP bootloops:
Code:
dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc
Click to expand...
Click to collapse
I tried this command after flashing lineage rom on my Nexus 5x. After flashing the rom, you initially see the Lineage logo, but it never boots, it just goes on into recovery. I flashed the rom 2 times, but same effect. After this I tried the command up here from the terminal, but nothing changes. Every time I reboot, it just boots back into TWRP. What do I have to do if this command does not work? Anyone have an idea? I saw the other commands in this thread, but it seems like most people don't think it's wise to execute those, so i'm just asking to be sure.
I also tried restoring the original backup of the phone I made in the first place before flashing lineage, but that just ends up in a bootloop where I end up in a screen with the google logo and the unlock sign. I followed these instructions to the letter, but somehow the phone is now bricked.. https://wiki.lineageos.org/devices/bullhead/install
So, no ideas here? I frantically tried getting the phone to boot into the bootloader, and after I don't know how many reboots it finally responded to my holding the vol down button, and got into the bootloader. From there I was able to flash back the entire phone to factory settings (I did not want to risk having to try over and over again to get it into the bootloader) and I'll keep it at that for now. I'm pretty experienced with custom roms on several Nexus 4, 5 and Galaxy Note II, but I've never had anything like this after flashing a rom.
Worked like magic the first time around. Thank you so much your your skills and sharing it
Code:
dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc
[/QUOTE]
FYI: If you run into these problems when using a MediaTek powered device, replace the of= path with
Code:
/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/para
Enjoy!

Tried to OTA update, now phone only boots into TWRP. ROM is still there.

Hi all, I'm having an issue where I tried to do the OTA update, which failed since I have a TWRP installed.
Now, whenever I boot my phone, it goes to TWRP by default. I can still go to the bootloader and start (or fastboot continue) to enter my OS, but is there a way that I can set that by default?
Thanks!
You can't install OTA update if you're rooted/TWRP. First you'd have to unroot.
Anyways to fix your problem do this:
Go to TWRP> advanced> terminal> and type these 2 commands
1)
dd if=/dev/zero of=/dev/block//bootdevice/by-name/fota
2)
dd if=/dev/zero of=/dev/block//bootdevice/by-name/misc
Should get you out of TWRP bootloop
The OTA is in cache... Wipe caches, reboot, and don't accept the OTA again.
LiteSoul said:
You can't install OTA update if you're rooted/TWRP. First you'd have to unroot.
Anyways to fix your problem do this:
Go to TWRP> advanced> terminal> and type these 2 commands
1)
dd if=/dev/zero of=/dev/block//bootdevice/by-name/fota
2)
dd if=/dev/zero of=/dev/block//bootdevice/by-name/misc
Should get you out of TWRP bootloop
Click to expand...
Click to collapse
Yeah, I realized that afterwards, which was what I mentioned in the OP.
Thanks so much btw, that worked! Guess now we wait until a custom 83 is released
LiteSoul said:
You can't install OTA update if you're rooted/TWRP. First you'd have to unroot.
Anyways to fix your problem do this:
Go to TWRP> advanced> terminal> and type these 2 commands
1)
dd if=/dev/zero of=/dev/block//bootdevice/by-name/fota
2)
dd if=/dev/zero of=/dev/block//bootdevice/by-name/misc
Should get you out of TWRP bootloop
Click to expand...
Click to collapse
This solved my problem. Thank you so much!

TWRP bootloop after LineageOS OTA Update

Hi everyone,
I came into a TWRP bootloop and don't know how to get out. Here's how it happened:
I wanted to start the OTA Update of LineageOS and clicked on install after it was downloaded. The device restarted and booted into TWRP. Nothing else happened. So I decided to do a reboot from TWRP (without doing anything else).
Instead of booting LineageOS it booted again into TWRP.
Now I am caught in this bootloop. The phone always boots into TWRP instead of LineageOS.
Any idea how to fix this?
Solution found
Found a solution by myself:
executing
dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc
in TWRP terminal solved the issue.
Btw: TWRP recovery from an earlier backup and also clean installing LineageOS did not solve the Problem.
gnackwatschn said:
Found a solution by myself:
executing
dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc
in TWRP terminal solved the issue.
Btw: TWRP recovery from an earlier backup and also clean installing LineageOS did not solve the Problem.
Click to expand...
Click to collapse
I've encountered too the same problem (my phone version is the h870). Do you have any ideas on why this is happening? I managed to successfully install manually the ota package with twrp (/data/org.lineageos.updater/app_updates) but twrp still keeps looping
I have the same problem. I've tried installing lineage os ota update both via system settings and install manually via twrp but ended up with bootloop. Is there's a way to solve this?
dwisatriow said:
I have the same problem. I've tried installing lineage os ota update both via system settings and install manually via twrp but ended up with bootloop. Is there's a way to solve this?
Click to expand...
Click to collapse
Did you enter twrp via power off - key sequence or via the ota menu?
TWRP Loop
Mr-Kappa said:
Did you enter twrp via power off - key sequence or via the ota menu?
Click to expand...
Click to collapse
I am in the same boat, but about to try the fix above.
From what I've read elsewhere, this is a known bug in TWRP, and some useful person berated someone else for not knowing about having the correct bootloader (???), but when you're doing an update, that doesn't seem a logical thing?
In answer to your question Mr Kappa, when the system has downloaded the update, you tap to install, and it just does it's own thing, and hey presto, you're stuck in a twpr boot loop. This happens on all models it seems, from LG, Samsung, Moto, and lord only knows how many others, but the fix (and the only fix unless you leave USB debugging enabled) is this "dd if=" command, which is different for each make and model of phone.
***IF you have USB debugging enabled** - reboot to bootloader from TWRP (it will allow you to do this) then connect to your PC, open a command window (assuming you've got ADB/FASTBOOT installed) and type in "FASTBOOT CONTINUE". Apparently this works, but I've not enabled USB debugging so I can't try it (sensible security feature).
Try this one...
https://forum.xda-developers.com/lg-g6/development/recovery-twrp-3-1-x-t3627595
Mr-Kappa said:
Did you enter twrp via power off - key sequence or via the ota menu?
Click to expand...
Click to collapse
I entered it via "reboot recovery" menu on flashify apps.
thx bro its work!!!
I am sorry to be asking at the wrong forum, but does anyone know the dd command for LeEco Le 1s? I am stuck with the same problem and am not able to find any solution for my model anywhere
I would be grateful if someone was kind enough to help me out here.
I had the same issue and was able to fix as the OP said but I wanted to add a couple steps that might not be obvious to some newbs like me.
Turn on the phone and let TWRP load. Connect your phone to your computer via USB and open a terminal window on your computer. Type adb shell. Then:
dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc
Worked for me on LG G6 US997.
gnackwatschn said:
Found a solution by myself:
executing
dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc
in TWRP terminal solved the issue.
Btw: TWRP recovery from an earlier backup and also clean installing LineageOS did not solve the Problem.
Click to expand...
Click to collapse
THANK YOU VERY MUCH !!!!!
YOU HELP ME TO FIXING MY PHONE DUDE (anyway, I came from google search and I'm using LineageOS 15 on my zenfone. Got a bootloop to TWRP and I try to do what you say and surprisingly it works ! :highfive
Thanks, I use this every time an OTA update breaks boot.
gnackwatschn said:
Code:
dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc
Click to expand...
Click to collapse
Hey there, I'm having same problem.
I couldnt run the command in windows, but I did on Recovery terminal (OrangeFox), even tho the command runs properly, I still cant get out of Recovery.
Any idea?
gnackwatschn said:
Hi everyone,
I came into a TWRP bootloop and don't know how to get out. Here's how it happened:
I wanted to start the OTA Update of LineageOS and clicked on install after it was downloaded. The device restarted and booted into TWRP. Nothing else happened. So I decided to do a reboot from TWRP (without doing anything else).
Instead of booting LineageOS it booted again into TWRP.
Now I am caught in this bootloop. The phone always boots into TWRP instead of LineageOS.
Any idea how to fix this?
Click to expand...
Click to collapse
Yes, its the root that caused it. in twrp backup the data to mmc/otg/internal -> copy the lineage os zip file, gapps.. to a mmc or otg, in twrp -> wipe cahe,dalvik, data.. exept internal stor-> select storage, install lineage then gapps , dont install magisk/root zip, restore data, reboot system, install update -> reboot-> install rootzip.
next time unistall root then update.
gnackwatschn said:
Solution found
Found a solution by myself:
executing
dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc
in TWRP terminal solved the issue.
Btw: TWRP recovery from an earlier backup and also clean installing LineageOS did not solve the Problem.
Click to expand...
Click to collapse
im sorry i am a newbie here.I have the same problem with a xiaomi redmi 7,i was forced to re-install the whole rom with the newest update because of the bootloop.Where exactly do i execute this command? in my computer? or in fastboot mode?
I have the same problem but my pc does not detect my phone when Im trying to connect it and use ADB, I tried 2 different cables. Is there anything I can do or my phone turned into expensive brick?
EDIT: I ignored what my pc was telling me (that no device is connected) and simply went to adb and typed the code above. It works, thank you
jdrouill said:
Turn on the phone and let TWRP load. Connect your phone to your computer via USB and open a terminal window on your computer. Type adb shell. Then:
dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc
Click to expand...
Click to collapse
Bro! You are my hero <3 Thank You so kindly much!
I just registered and only wanna say to you that "you're doing god's work". Thanks a lot. Keep em coming to this gem. Youre awesome. Thanks a lot!
gnackwatschn said:
Solution found
Found a solution by myself:
executing
dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc
in TWRP terminal solved the issue.
Btw: TWRP recovery from an earlier backup and also clean installing LineageOS did not solve the Problem.
Click to expand...
Click to collapse
Jonarius said:
im sorry i am a newbie here.I have the same problem with a xiaomi redmi 7,i was forced to re-install the whole rom with the newest update because of the bootloop.Where exactly do i execute this command? in my computer? or in fastboot mode?
Click to expand...
Click to collapse
yes, using your PC, try searching about adb and how it work first.
here: https://www.xda-developers.com/install-adb-windows-macos-linux/
It aint hard, after that you can execute these:
Turn on the phone and let TWRP load (Even though bootlooping and stuck on the TWRP logo). Connect your phone to your computer via USB and open a terminal window on your computer. Type adb shell. Then:
dd if=/dev/zero of=/dev/block/bootdevice/by-name/misc bs=256 count=1 conv=notrunc
Worked for me on Xiaomi 6X recently. Good luck!

Categories

Resources