Related
how do you put the myt4G in to recovery mode?
Wow not to be rude but did you try the search button......hold down the power button and the volume down button at the same time while the phone is off. The select recovery
Sent from my icy cold glacier freezing every phone in its path
i did and i tried search by looking up hbooting myt4g recovery mode couldn't find nothing i even googled it and found this method your giving me but for some reason when i hold down home and power then let go of power button it fastboots..
but now i realized its the vol button i was looking at the myt3G recovery...thank you.
this is not working for me BTW.... can anyone else help out?
l0uisz said:
this is not working for me BTW.... can anyone else help out?
Click to expand...
Click to collapse
You have to have fastboot unselected before it will work. I'm looking into rooting my wife's mt4g, and that took me forever to figure out.
I have a vibrant, so I'm new around these parts. Still doing my research before taking the plunge.
lol! wow thanks i wouldve never figured that out hah! yea well this is very helpful here http://forum.xda-developers.com/showthread.php?t=858996 hoping that you know how to use ADB of course =) now i am ready to root !
OH! btw how do you get off recovery mode ? do u just pull the batt out?
l0uisz said:
lol! wow thanks i wouldve never figured that out hah! yea well this is very helpful here http://forum.xda-developers.com/showthread.php?t=858996 hoping that you know how to use ADB of course =) now i am ready to root !
OH! btw how do you get off recovery mode ? do u just pull the batt out?
Click to expand...
Click to collapse
factory recovery image? that i am aware of, yes. but i might be incorrect on that.
bnielsen40 said:
You have to have fastboot unselected before it will work. I'm looking into rooting my wife's mt4g, and that took me forever to figure out.
I have a vibrant, so I'm new around these parts. Still doing my research before taking the plunge.
Click to expand...
Click to collapse
Please use the term quick boot when referring to the reboot option that does not fully restart the phone.
Use 'fastboot' to refer to the low level utility / protocol that allows image (ROM,etc) flashing via USB
l0uisz said:
lol! wow thanks i wouldve never figured that out hah! yea well this is very helpful here http://forum.xda-developers.com/showthread.php?t=858996 hoping that you know how to use ADB of course =) now i am ready to root !
Click to expand...
Click to collapse
No problem (clicky the thanks button ). I was actually leaning toward this method: http://forum.xda-developers.com/showthread.php?t=834225. I'm still trying to determine the difference between it and the one you linked. The main purpose will not be really to flash any roms (she likes the stock), but to resolve some minor issues she has w/ her device. For example, her market fc's every time it updates - it's getting old to have to uninstall updates before she can even access the market. So I'm wanting to root so I can use TB to freeze the market updater.
cal3thousand said:
Please use the term quick boot when referring to the reboot option that does not fully restart the phone.
Use 'fastboot' to refer to the low level utility / protocol that allows image (ROM,etc) flashing via USB
Click to expand...
Click to collapse
Aha...see this is the stuff I need to learn - I simply used that term b/c it's what was in the reboot option. So it sounds like "fastboot" is the same as Downloading mode on my vibrant, correct? In other words, roms can be flashed via either clockwork or a usb connection to a computer while the device is in fastboot...?
I need to find a tutorial that explains the basics for the mt4g. It's a pretty different animal than my vibrant. I'm creating my own flashable mods for my vibrant, yet I pick up my wife's mt4g and I'm back to square one. Fruustratting!
If you already flashed it, Power Off > Hold Vol Down + Power until booted > Vol Down to recovery and select
bnielsen40 said:
No problem (clicky the thanks button ). I was actually leaning toward this method: http://forum.xda-developers.com/showthread.php?t=834225. I'm still trying to determine the difference between it and the one you linked. The main purpose will not be really to flash any roms (she likes the stock), but to resolve some minor issues she has w/ her device. For example, her market fc's every time it updates - it's getting old to have to uninstall updates before she can even access the market. So I'm wanting to root so I can use TB to freeze the market updater.
Click to expand...
Click to collapse
thats what i want i don't want to deal with flashing roms and all that crap lol i just want ROOT and keep it stock i just better not forget to UNroot before accepting an OTA update lol
hey i'am successfully rooted now with stock ROM! with the link i gave you! i think you should use the one i gave you its more detailed that the one you linked to me...theres a few things missing there in your link.
Hello again, everyone. This is going to be another one of my easy-to-understand, simplistic type tutorials. For all of the people that might not have an extensive knowledge of android and how to operate basic linux devices, this is going to be a noob level how-to on flashing roms. Most of these directions also go for kernels (not 100% of the time, but most), so just ask if you need help.
Alright, I'm going to assume that you're already rooted and have s-off, as well as a custom recovery menu, if not this tutorial will mean nothing to you. Go read my root tutorial if you need to accomplish this task.
My root tutorial: http://forum.xda-developers.com/showthread.php?t=1228566
How to flash roms:
(Step 1) Finding a rom. May sound easy, but you have to figure out what you want, and more importantly, what you need. There is a very diverse selection of roms here on xda so reading up shouldn't be too much homework for y'all. If you're not willing to do this little amount of work to just read and see what you want and need, then you are hopeless in the first place. I will, however, help you if you are putting a significant amount of effort into this process.
(Step 2) Downloading the rom. This is not hard at all. I get all of my roms and kernels (not including my own) from xda, and downloading has always been a breeze. I can't remember now if you need to sign up for xda or not in order to access downloading. If so, then you should sign up anyway, xda is great! The easiest way to download roms is to download them on the computer then plug your phone in as usb drive and just place them on the root of you sdcard. There is another way though, and it isn't much more difficult. Just go to the market and download the xda app, you don't need the premium (unless you want it) the free version is good enough. The app is pretty much just a mobile translation of the actual site, so finding something on the app that you found on the computer isn't too much of a pain. Once you have found it in the app, just download it, and it should be placed in the folder sdcard>downloads.
(Step 3) Making a backup. Go into recovery by powering down the phone and holding volume down and the power button until the hboot menu appears. Make sure before you actually power down the phone, that you have fastboot turned off. If it is on, then the phone will automatically do the fastboot procedure, instead of going to the hboot menu. How to turn off fast boot: home>menu>settings>applications>fastboot. Make sure that it is unchecked. Okay, at this point we are at the hboot menu. It may check for an image, but shouldn't find one. Just let it do its thing. Volume down to recovery and select it by hitting power. The phone should reboot into recovery. This next part may have some variation because there are a couple of different custom recoveries. Most of them are all going to operate the same though. Once you are in recovery, volume down to "backup/restore". Select it. ALWAYS MAKE A BACKUP BEFORE FLASHING ANYTHING, I AM NOT RESPONSIBLE FOR ANYTHING THAT GOES WRONG!! Now select "backup". It will start backing everything up. It usually takes about five minutes so be patient, if it looks like it froze then just wait it is probably just rendering. After it has completed go back to the previous menu and proceed to the next step.
(Step 4) Flashing the rom. To do this, have the phone in recovery and volume down to "install zip from sdcard". Select this then volume down to and select "choose zip from sdcard". Now navigate to where you put the file and select it. If you did the method of downloading it on the computer then putting it on the root of the sdcard, then it should be on the current menu. If you downloaded it using the method of the app, then it should be in a folder called "download/". Finding it is really simple, just navigate the folders until you see it. Once you have found it, select it and install it. This process might take a couple of minutes. Once it has completed, you can select the reboot phone option and power that baby up.
(Step 5) Troubleshooting. If you are in a bootloop, (a bootloop is when the phone is stuck booting up) then just take the battery out, put it back in and power it up to try again. If it fails again, then go back into recovery. (like we did before^) This is the reason we made a backup. Just volume down to "backup/restore" select restore and select the image you would like to restore. Again, this may take a few minutes, just let the phone work. After it is done you can just boot it up and it is like you never did anything. If this happens, then this whole process was a fail. But, on the bright side, you made the backup (hopefully) and avoided having to flash a stock RUU or bricking your phone. Just try again with more roms, you'll get the hang of it.
Here is a very good aosp rom that I, in know way, take credit for: http://forum.xda-developers.com/showthread.php?t=1178834&highlight=omgb
This rom was created by user: r2DoesInc
I am in no way affiliated with this user and have no right over his/her rom.
Remember, the rom page will probably have directions also. If it calls for specifics, then make sure to carry out those specifics!
Congratulations, you now know how to flash roms, even if you are a noob!
Thank you so much xda for making this site where fellow androdians can come together and help one another.
Thank you to all my supporters and I hope you all found this tutorial to be quite resourceful.
Post all of your questions and statements here. If I don't immediately respond that means I am asleep, at school, or at work. Yes, I am just a high school student, but that in now way makes me any less eligible of being a genius than anyone else.
soo pumped
finally got my evo 4g root tried miui thought it was incredible...until i tried cm7 rc1.....completely flawless but i cant find the savaged kernel to pair it....
You should try that rom that I linked. It's really refreshing to experience true gingerbread 2.3.5. I love it and I use it as my daily rom. But cm7 is pretty amazing also.
dont know why i was so dumb i went with rc1... rc4 is even better ...what link? ill check it out i just am still confused about flashing a rom and kernel i know fn noob haha
sorry for the edit i meant to say im confused about flashing them both because the evo has been out for so long but it seems like there isnt that much for them or way too much there isnt really an optimal flash yet with both kernel and rom
I think it's a little bizarre to assume that someone can root the phone, s-off, and get a custom recovery on the phone but not flash a rom.....
deathsled said:
I think it's a little bizarre to assume that someone can root the phone, s-off, and get a custom recovery on the phone but not flash a rom.....
Click to expand...
Click to collapse
Haha, I agree. But still, if you used revolutionary to root, like in my tutorial, then it was all automated. By using that method, the user doesn't have barely anything to do except for some small stuff like taking out the battery and turning some functions off. I'm just being helpful because I too was once a noob.
This was super helpful thanks for the guide
Spectacles, Testicles, Wallet & Watch, evO²·³·³
infamousteeboy said:
This was super helpful thanks for the guide
Spectacles, Testicles, Wallet & Watch, evO²·³·³
Click to expand...
Click to collapse
Gracias. Hit that thanks button if it helped!
Thank you for posting this guide, as this helped me to install MIUI.
YouThere said:
Thank you for posting this guide, as this helped me to install MIUI.
Click to expand...
Click to collapse
You are very welcome. Hit the thanks button if ya want.
ceng7904 said:
Gracias. Hit that thanks button if it helped!
Click to expand...
Click to collapse
I'll have to do it tomorrow...I got hit with
"You are only limited 5 thanks per day"
LOL but I will hit the thanks for sure in the morning!
Spectacles, Testicles, Wallet & Watch, evO²·³·³ *ROOTED*
infamousteeboy said:
I'll have to do it tomorrow...I got hit with
"You are only limited 5 thanks per day"
LOL but I will hit the thanks for sure in the morning!
Spectacles, Testicles, Wallet & Watch, evO²·³·³ *ROOTED*
Click to expand...
Click to collapse
Thank you...
Well what happens when your SD won't mount as disk drive
Sent From KaoMinerva
I am new, but I have a question why you didn't mention wiping things before flashing the rom? While I saw many other tutorials emphasized on wiping menu in the recovery mode.
Is that really a necessary step or not?
yww325 said:
I am new, but I have a question why you didn't mention wiping things before flashing the rom? While I saw many other tutorials emphasized on wiping menu in the recovery mode.
Is that really a necessary step or not?
Click to expand...
Click to collapse
It is necessary, believe me. Wiping everything in recovery except for SD card is important between ROM switches. Otherwise you will run into so many issues.
Sent from my HTC Evo using xda premium
thank you.
ceng7904 said:
Post all of your questions and statements here. If I don't immediately respond that means I am asleep, at school, or at work. Yes, I am just a high school student, but that in now way makes me any less eligible of being a genius than anyone else.
Click to expand...
Click to collapse
Once you have successfully flashed a ROM do you need to keep the Zip file for it on your SD Card in order for it to work or can you delete the zip file?
scrappa_doozie said:
Once you have successfully flashed a ROM do you need to keep the Zip file for it on your SD Card in order for it to work or can you delete the zip file?
Click to expand...
Click to collapse
You can delete the Zip off your card once you are done flashing!
Sent from my PC36100 using xda premium
Thanks for posting this guide. It was huge helping me Root my first phone! I spent a ton of time researching, trying to soak it all in before I attempted to root and this thread was awesome!
Thank you
A good friend of mine supposedly shut off his A500 during a upgrade/update. The unit still powers on but all I can get it to show is "boot verified failed..." in the upper-left corner of the Acer screen. I've downloaded several ROMs and tried reflashing from the SD card but no luck in reviving this. All I get is the Android triangle. I've reformatted the SD card. I've tried the Vol + power + screen lock stuff, too. I can't get to any other screen to change any settings... period. Many of the ROMs that I would like to try are dead links now that the government has shut them down. This is a US unit. Would someone be kind enough to direct me to where I can get the right stock ROM so I can at least get this thing running for him?
Hi ..
Not sure what he done.But it sounds like this will fix this issue for you..
Just follow this link good luck
http://forum.xda-developers.com/showthread.php?t=1307539#
erica_renee said:
Hi ..
Not sure what he done.But it sounds like this will fix this issue for you..
Just follow this link good luck
http://forum.xda-developers.com/showthread.php?t=1307539#
Click to expand...
Click to collapse
Thanks for your response and it DOES look like it would work... IF I could access anything on the tablet - like enabling USB Debugging, etc. I can't get to it. What I need is something I can flash or boot right from the SD card as that's the only thing I have access to.
with this you do not need to have access to nothing. Download the file From the thread above to your windows pc. OPEN THE Zip file. it will have all the tools and A VERY DETAILED set of instructions. Find the instruction file and fallow it.
Many people have used this with ease. If you want help just flashing another.zip file. post the rom that was on the tablet . the recovery installed as well.
erica_renee said:
with this you do not need to have access to nothing. Download the file From the thread above to your windows pc. OPEN THE Zip file. it will have all the tools and A VERY DETAILED set of instructions. Find the instruction file and fallow it.
Many people have used this with ease. If you want help just flashing another.zip file. post the rom that was on the tablet . the recovery installed as well.
Click to expand...
Click to collapse
OK, I tried it out and it doesn't pick up the tablet as I don't think USB debugging is enabled and I have no way to enable it. That's why I'm asking for a method to flash it from the SD card.
BTW, I found the S/N inside the SD card door.
You could try decrypting one of the update roms;
http://forum.xda-developers.com/showthread.php?t=1113878
Note that some are encrypted, and you have to de-crypt with the tool listed there.
Extract and copy the update.zip. Copy to SD.
Boot by vol- or vol+, and see if it will install.
There are a couple of other tips in the threads, like toggling the button for Portrait lock, to force the tab to start formatting.
Moscow Desire said:
You could try decrypting one of the update roms;
http://forum.xda-developers.com/showthread.php?t=1113878
Note that some are encrypted, and you have to de-crypt with the tool listed there.
Extract and copy the update.zip. Copy to SD.
Boot by vol- or vol+, and see if it will install.
There are a couple of other tips in the threads, like toggling the button for Portrait lock, to force the tab to start formatting.
Click to expand...
Click to collapse
Thanks VERY much! I swear I must have tried these before and they didn't work. However, I missed one important step - unzipping the update.zip from the file! DOH! I feel really stupid but the tablet is running 100% perfectly.
Again, my most sincere thanks!
gjtoth said:
Thanks VERY much! I swear I must have tried these before and they didn't work. However, I missed one important step - unzipping the update.zip from the file! DOH! I feel really stupid but the tablet is running 100% perfectly.
Again, my most sincere thanks!
Click to expand...
Click to collapse
Hey, really, it's no problem. Glad we all could help get you up and running.
No, I haven't used that method, since my HTC desire. Same principle though.
I'd tell you the principle behind it, but it's rather long.
Glad you got it going.
My pals and I, are launching a new site. Hopefully it will be for people not so technically PHD'd with android. Not quite so technical as XDA. You're more than welcome to place some info, when we launch. It's more community orientated, so a different venue.
XDA, is, and always will be the place to come for the really technical stuff. As you see, there are users here, which will give you what they know. May not always be the fix, but, some people here "do" care.
Moscow Desire said:
Hey, really, it's no problem. Glad we all could help get you up and running.
No, I haven't used that method, since my HTC desire. Same principle though.
I'd tell you the principle behind it, but it's rather long.
Glad you got it going.
My pals and I, are launching a new site. Hopefully it will be for people not so technically PHD'd with android. Not quite so technical as XDA. You're more than welcome to place some info, when we launch. It's more community orientated, so a different venue.
XDA, is, and always will be the place to come for the really technical stuff. As you see, there are users here, which will give you what they know. May not always be the fix, but, some people here "do" care.
Click to expand...
Click to collapse
Be happy to check it out. While I don't have a lot of tech savvy in Android, XDA has been my "go to" for almost all things Android for MY A500. While I can't contribute much (if anything ), I have sure picked up a wealth of help/tips here.
gjtoth said:
Be happy to check it out. While I don't have a lot of tech savvy in Android, XDA has been my "go to" for almost all things Android for MY A500. While I can't contribute much (if anything ), I have sure picked up a wealth of help/tips here.
Click to expand...
Click to collapse
Hey, we all start "somewhere".
Androidtabletgeeks.com And remind you, it is not competition. Just an alternative.
Officially, it has not launched. Still working on tutorial videos and such. Like I said, it's a different venue.
We all start somewhere......
Moscow Desire said:
Hey, we all start "somewhere".
Androidtabletgeeks.com And remind you, it is not competition. Just an alternative.
Officially, it has not launched. Still working on tutorial videos and such. Like I said, it's a different venue.
We all start somewhere......
Click to expand...
Click to collapse
I peaked very nice.hope you don't mind.
Did not reg.
erica_renee said:
I peaked very nice.hope you don't mind.
Did not reg.
Click to expand...
Click to collapse
No problem. Still have tons of video tutorials to make.
Moscow Desire said:
You could try decrypting one of the update roms;
http://forum.xda-developers.com/showthread.php?t=1113878
Note that some are encrypted, and you have to de-crypt with the tool listed there.
Extract and copy the update.zip. Copy to SD.
Boot by vol- or vol+, and see if it will install.
There are a couple of other tips in the threads, like toggling the button for Portrait lock, to force the tab to start formatting.
Click to expand...
Click to collapse
MD, i was unable to download any of the 3.0.1 update files. When i click on the link it takes me to some xml tree. is there any other place where i could download?
Bricked??
Hello All,
I was running ICS ota on my a500, I am trying to boot with recovery, and it gives me an icon of android with gears and reboots, with the following error:
Not legal! Abort
The blob package is not official ~Abort!
After which it just shows the word android and blinks every few seconds.
My a500 was not rooted.
I tried afew things posted on the forums, civato method, downloading a previous OTA and running it. nothing works.
Please help....
When i start up normally the screen shows the word ANDROID and stay`s on that.
volume down and power android puppet with exclamation mark.
Volume up and power give`s me the menus skrilax bootloader V6 reboot- fastboot mode – Boot recovery – Set Boot secondary Kernel image – Set Debug mode on – Wipe cache.
I have tried all options.
Finally holding reset and power button down and after 3 sec release power and 1 sec after that the reset
When I use Blackthund3r`s flashtool v0.4 I get the message no APX mode devices are connected.
Can you help me out? Preferably whit a Dutch recover.
Many thanks in advance
As a bog standard user I naively assumed that I could put apps on my SD card as and when I wanted. Instead the majority refuse to be put there or cause problems.
If I root my Samsung J500fn (Marshmallow) will I be able to chose the location for putting apps? Can I get rid totally of the stuff Google/Samsung think I need but I never use? Can I make better use of my SD card that is practically empty? Are there any drawbacks to keeping Marshmallow as installed or would rooting overwrite it? Is there a better way than to root? Is "One Click root" safe to use? Am I better of using various programs like Odin, TWRP etc. mentioned in various threads here?
Thanks to any and all who can answer my questions. :fingers-crossed:
Anne
webelan said:
As a bog standard user I naively assumed that I could put apps on my SD card as and when I wanted. Instead the majority refuse to be put there or cause problems.
If I root my Samsung J500fn (Marshmallow) will I be able to chose the location for putting apps? Can I get rid totally of the stuff Google/Samsung think I need but I never use? Can I make better use of my SD card that is practically empty? Are there any drawbacks to keeping Marshmallow as installed or would rooting overwrite it? Is there a better way than to root? Is "One Click root" safe to use? Am I better of using various programs like Odin, TWRP etc. mentioned in various threads here?
Thanks to any and all who can answer my questions. :fingers-crossed:
Anne
Click to expand...
Click to collapse
Hi Anne,
We all have the same trouble with storage on our J5.
If you chose to root your phone then yes you will be able to uninstall alot of the bloat ware that is on your phone.
You will also have the option of using adaptable storage.
There are lots of threads on here that will guide you through the process. Just make sure that you read the guides properly and download and install the CORRECT zips.
I don't know if the one click root is safe to use.
I would advice installing TWRP and then flashing super su. Again all of the guides are on here.
If you do install TWRP via Odin then you will have the option of flashing custom ROMs..
Have a good look at the guides. Ask all the questions that you need to. People in here will be happy to help.
It's really nice to see you on here
Have fun
John
Don't need root for adoptable storage.
Hi
Did u get the info that you need ?
Rooting
johnhux7 said:
Hi
Did u get the info that you need ?
Click to expand...
Click to collapse
Hi again, thanks for asking.
I downloaded TWRP from https://www.androidfilehost.com/?w=files&flid=55922, version for SM-J500FN dated May 6, 2016. Also ODIN-v3.10.7 and SU SR4-SuperSU-v2.78-SR4-20161115184928 as well as the Samsung USB drivers. All check sums were fine. Odin 3 installed fine on my PC. I used Odin 3 to install the TWRP on my phone. However, when I try to go into Volume up - home - power on - I get a screen that does not resemble at all what I thought TWRP should look like.
I get the yellow/green Android thingy which says "installing system update" follows by "no command" followed by a screen which says:
Android Recovery
MMB29M.J500FNXXU1BPH1
samsung/j5nltexx/j5nlte
6.0.1/MMB29M/J500FNXXU1BPH1
user/release-keys
Use volume up/down and power. (all in yellow)
Followed by a menu which includes "apply update from SD card" but which doesn't install the SU zip file that I put in the download section of the SD card.
--------
So I am a bit lost and bewildered. Is the menu correct for TWRP? I haven't seen anything on the web or in YouTube that looks at all like what I'm getting. Did TWRP install properly - Odin 3 seemed to think so, but I'm beginning to wonder.
Any help, comment appreciated.
Anne
webelan said:
Hi again, thanks for asking.
I downloaded TWRP from https://www.androidfilehost.com/?w=files&flid=55922, version for SM-J500FN dated May 6, 2016. Also ODIN-v3.10.7 and SU SR4-SuperSU-v2.78-SR4-20161115184928 as well as the Samsung USB drivers. All check sums were fine. Odin 3 installed fine on my PC. I used Odin 3 to install the TWRP on my phone. However, when I try to go into Volume up - home - power on - I get a screen that does not resemble at all what I thought TWRP should look like.
I get the yellow/green Android thingy which says "installing system update" follows by "no command" followed by a screen which says:
Android Recovery
MMB29M.J500FNXXU1BPH1
samsung/j5nltexx/j5nlte
6.0.1/MMB29M/J500FNXXU1BPH1
user/release-keys
Use volume up/down and power. (all in yellow)
Followed by a menu which includes "apply update from SD card" but which doesn't install the SU zip file that I put in the download section of the SD card.
--------
So I am a bit lost and bewildered. Is the menu correct for TWRP? I haven't seen anything on the web or in YouTube that looks at all like what I'm getting. Did TWRP install properly - Odin 3 seemed to think so, but I'm beginning to wonder.
Any help, comment appreciated.
Anne
Click to expand...
Click to collapse
If your phone is looking like that then you have the wrong version of TWRP for the version of android that your using.
I did the same thing.
I hadn't got the time at the mo to find you the correct version but that is the problem for sure.
You want the one by Garnesh Varma which if on the Roms & kernels thread
John
johnhux7 said:
If your phone is looking like that then you have the wrong version of TWRP for the version of android that your using.
I did the same thing.
I hadn't got the time at the mo to find you the correct version but that is the problem for sure.
You want the one by Garnesh Varma which if on the Roms & kernels thread
John
Click to expand...
Click to collapse
Hi john,
Following your suggestion I downloaded the TWRP version http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960 by searching for Garnesh Varma. It successfully installed, but the problem remains the same. I do not get the TWRP recovery page just the same as before.
I shall continue to look to see if I can find another version from Garnesh, although it seemed correct ie SM-J500FN Android version 6.0.1 Build number MMB29M.J500FNXXU1BPH1, security patch level 1 August 2016.
Will let you know how I get on.
Thanks again,
Anne
webelan said:
Hi john,
Following your suggestion I downloaded the TWRP version http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960 by searching for Garnesh Varma. It successfully installed, but the problem remains the same. I do not get the TWRP recovery page just the same as before.
I shall continue to look to see if I can find another version from Garnesh, although it seemed correct ie SM-J500FN Android version 6.0.1 Build number MMB29M.J500FNXXU1BPH1, security patch level 1 August 2016.
Will let you know how I get on.
Thanks again,
Anne
Click to expand...
Click to collapse
Ahah! The trick was to turn off the phone and not to permit ODIN to do a reboot. I didn't know how to turn off so I pulled the battery. Then went into volume up - home - power on and got the correct menu. Whew. Rooted now according to root checker. Now to get some of the stuff off the phone and make some space.#
Thanks for your help,
Anne
webelan said:
Ahah! The trick was to turn off the phone and not to permit ODIN to do a reboot. I didn't know how to turn off so I pulled the battery. Then went into volume up - home - power on and got the correct menu. Whew. Rooted now according to root checker. Now to get some of the stuff off the phone and make some space.#
Thanks for your help,
Anne
Click to expand...
Click to collapse
Nice one. I'm pleased that you got it sorted !
Next you will be on the custom roms ! If you need any help just shout !
John
@webelan
Hello Anne!
Once you are rooted you can remove any Google/Samsung app. But removing some system apps can lead to bootloop. You can recover from bootloop by re-flashing stock rom.
I can make a flashable zip which removes unnecessary system apps, including the Google/Samsung apps which you want (you flash the zip in recovery and you're done). So let me know which Google/Samsung apps you wanna remove.
You can find some more basic informations in our Q&A thread: http://forum.xda-developers.com/galaxy-j5/how-to/galaxy-j5-qa-thread-galaxy-j5-series-t3382922 .
I recommend you to try cm 12.1 (5.1.1 lollipop) by Nick Verse if you don't care about Samsung Camera, Memo and Browser. I use Open Camera, Color Note and Dolphin Browser (has sound/brightness sliders in videos) as alternatives. Unlike Touchwiz, CM 12.1 is faster than Touchwiz and has more free ram. But latest release has a bug (random reboot reported by users) which can be fixed manually. I'm running latest release without any problem.
Have a nice day!
Robert.
PS: You have a nice name
more woe
johnhux7 said:
Nice one. I'm pleased that you got it sorted !
Next you will be on the custom roms ! If you need any help just shout !
John
Click to expand...
Click to collapse
Don't know if I should start another thread but...
I used Aps2SD to create a second partition on my phone after making a backup of the SD card using that program. Restored the SD card and then I linked various apps to the new partition. When everything was done, and working, I used the option "Broken ap cleaner" just in case there were any residue files with "select all"
My error may have been to do a hard shutdown afterwards because now I get "Android System There's an internal problem with your device, and it may be unstable until you factory data reset." Then several aps, including a Google app, Photos, CM security and Gmail stop, in fact all those that run automatically at startup. Gmail and Google are on the internal drive now but were previously linked; CM is on the external partition still. The first thing after that I noticed after the hard shut down was that the icons for linked aps had disappeared and the aps keep stopping if I try to run them.
I read the Aps2SD FAQ and followed the two suggestions regard SU, ie "enable su at boot" and disabled "namespace separation" option.
Any suggestions? Should I
(a) do a "factory data reset"
(b) wipe the SD card and partition and completely reinstall the aps I want? Although if Google app is not working don't know if it can be reinstalled as I'm not sure which oneis meant.
(c) Bite the bullet and install a custom rom?
(d) something else?
Any help as usual very much appreciated,
Anne
webelan said:
Don't know if I should start another thread but...
I used Aps2SD to create a second partition on my phone after making a backup of the SD card using that program. Restored the SD card and then I linked various apps to the new partition. When everything was done, and working, I used the option "Broken ap cleaner" just in case there were any residue files with "select all"
My error may have been to do a hard shutdown afterwards because now I get "Android System There's an internal problem with your device, and it may be unstable until you factory data reset." Then several aps, including a Google app, Photos, CM security and Gmail stop, in fact all those that run automatically at startup. Gmail and Google are on the internal drive now but were previously linked; CM is on the external partition still. The first thing after that I noticed after the hard shut down was that the icons for linked aps had disappeared and the aps keep stopping if I try to run them.
I read the Aps2SD FAQ and followed the two suggestions regard SU, ie "enable su at boot" and disabled "namespace separation" option.
Any suggestions? Should I
(a) do a "factory data reset"
(b) wipe the SD card and partition and completely reinstall the aps I want? Although if Google app is not working don't know if it can be reinstalled as I'm not sure which oneis meant.
(c) Bite the bullet and install a custom rom?
(d) something else?
Any help as usual very much appreciated,
Anne
Click to expand...
Click to collapse
It sounds like the app has been corrupted, don't really know how to best advice you.
It sounds like you have to do s factory reset.
I would install a custom ROM.
The only trouble with this is that all the roms have just been shut down so you will have trouble downloading any.
Why model do you have ?
If you want to use a custom ROM pm me and I will send you a link.
The custom roms are much better (in my opinion )
John
Sent from my j5nltexx using XDA Labs
#Henkate said:
@webelan
Hello Anne!
Once you are rooted you can remove any Google/Samsung app. But removing some system apps can lead to bootloop. You can recover from bootloop by re-flashing stock rom.
I can make a flashable zip which removes unnecessary system apps, including the Google/Samsung apps which you want (you flash the zip in recovery and you're done). So let me know which Google/Samsung apps you wanna remove.
You can find some more basic informations in our Q&A thread: http://forum.xda-developers.com/galaxy-j5/how-to/galaxy-j5-qa-thread-galaxy-j5-series-t3382922 .
I recommend you to try cm 12.1 (5.1.1 lollipop) by Nick Verse if you don't care about Samsung Camera, Memo and Browser. I use Open Camera, Color Note and Dolphin Browser (has sound/brightness sliders in videos) as alternatives. Unlike Touchwiz, CM 12.1 is faster than Touchwiz and has more free ram. But latest release has a bug (random reboot reported by users) which can be fixed manually. I'm running latest release without any problem.
Have a nice day!
Robert.
PS: You have a nice name
Click to expand...
Click to collapse
Hi Robert,
Thanks for the offer. So far I have not deleted anything but have used software to partition my SD card and to move stuff out of internal memory onto it - or rather link it. I managed to mess up a bit but seem to have recovered - or at least got a phone with items I want to use. Next week when I've more time I'm hoping to install a Custom ROM. In the meantime I've spent what little time available trying to read as much as I can so that when I do put a Custom ROM on, it goes right first time.
Best wishes,
Anne
webelan said:
Hi Robert,
Thanks for the offer. So far I have not deleted anything but have used software to partition my SD card and to move stuff out of internal memory onto it - or rather link it. I managed to mess up a bit but seem to have recovered - or at least got a phone with items I want to use. Next week when I've more time I'm hoping to install a Custom ROM. In the meantime I've spent what little time available trying to read as much as I can so that when I do put a Custom ROM on, it goes right first time.
Best wishes,
Anne
Click to expand...
Click to collapse
Hi Anne!
Note that once you flash TWRP, Knox will become 0x1 (initially is 0x0) which means that you void the warranty. In my opinion, I don't care about the warranty because I prefer to have a better experience with my phone. I cannot live without root after I rooted a phone for first time
Regarding the ROM, if you wanna try cm12.1 (which I recommend it, best ROM which is closest to AOSP and never lagged) I'll recommend you to wait some more time because I'll download CM 12.1 sources and build a new update with the help of Nick Verse . He doesn't have enough space on his PC to have both cm12 & cm13 sources. I'm currently trying to extend my Linux partition to have enough space to build though. Is needed about 80gb in total average and I have about 20 and can't resize my partition. I might try to reinstall Linux.
If you have any other question, feel free to ask here (new thread if it's related to something else) or PM me.
Have a nice day!
Robert.
Having a similar issue, i have got my phone so it boots to TWRP 3.1.1-0 but cannot find a ROM file that will install, they all seem to be for j5nlte, even if the file name states j5nltexx. I have tried to ammend/remove the assert lines in the install package to no avail...
any advice would be good
Thanks in advance
PB
ashyx said:
Don't need root for adoptable storage.
Click to expand...
Click to collapse
Then what to do
#Henkate said:
Hi Anne!
Note that once you flash TWRP, Knox will become 0x1 (initially is 0x0) which means that you void the warranty. In my opinion, I don't care about the warranty because I prefer to have a better experience with my phone. I cannot live without root after I rooted a phone for first time
Regarding the ROM, if you wanna try cm12.1 (which I recommend it, best ROM which is closest to AOSP and never lagged) I'll recommend you to wait some more time because I'll download CM 12.1 sources and build a new update with the help of Nick Verse . He doesn't have enough space on his PC to have both cm12 & cm13 sources. I'm currently trying to extend my Linux partition to have enough space to build though. Is needed about 80gb in total average and I have about 20 and can't resize my partition. I might try to reinstall Linux.
If you have any other question, feel free to ask here (new thread if it's related to something else) or PM me.
Have a nice day!
Robert.
Click to expand...
Click to collapse
Please work on camera that is the only thing cm 12.1 lackss thank youu
HI all!! Glad to be here! Thank you in advance for the opportunity to receive much needed help.
ADMIN : Please put this in the proper topic forum if needed. Thank you!
Samsung Galaxy S7 SW-G935W8
I've never rooted an android and want to to customize the gui (to something really hi res and sharp looking and cool like 3D lazer razors!:cyclops: ) and remove bloatware.
I've done a bit of research prior too, just to familiarize myself with rooting and what's involved. Today, I found myself with an extra hour worth of time and figured, "meh, cant take that long!" Wow was I wrong! I have been working at this for 4 hours already.
I started by watching a tutorial AND reading thru the tutorial and DLing all necessary files to my computer that the tutorial said to. It was twrp ver 3.0.2-4 and ODIN, SU, and the samsung drivers. I quickly read through some troubleshooting posts here in case I got into some trouble I'd know what I'm dealing with.
step one(I'm doing this from memory)
copy SU onto phone (i put in in root directory and onto the sim *just in case)(had to look up where the "root" folder was located:silly: )
Step 2: turn off phone.
Step 3: turn phone on into Download mode
Step 4: press volume up to enter download mode
Step 5: open odin on pc
Step 6: put twrp*.*.*.*.img in the space for AP
Step 7: UNCHECK auto reboot
Step 8: hit start in ODIN
Step 9: PASS!!! right?!?!? WRONG!!!
SO THIS IS WHERE I MANUALLY REBOOT (oops caps) (vol dn+home button + power button) as soon as screen turns off (from DL screen) press and hold vol up whilst holding home + power.
Sometimes it just boots normally, sometimes it boots to a red screen, I have tried several different versions of the twrp and ODIN without success.
At this point I give up unless you can help me. I'm just glad I haven't bricked my phone *|YET|*
I have also tried leaving autoreboot enabled in ODIN. and then quickly holding vol dn+vol up+ home + power(also just vol dn+home+power and then switching to vol up+home+power) without success.
Any suggestions? Again thank you in advance!!
So I ended up using chain fire to auto root it. I must've been using the wrong img file. So anyway I've rooted my phone now. I checked with a root checker.
This is the weird thing. I haven't lost any of my data on my phone. All my contacts, texts, and even chrome bookmarks are still there. Is this normal?
Also I was wondering if CM Launcher was any good? It has ads which I don't like and a bunch of crap ended up on my home screen and all the folders are now mixed up! I installed the "Next tech" theme which seems pretty good except for all the apps are disorganized.
I installed G DATA Internet Security as well. Again I've read a few reviews and it's saying it's not all that great. Anyone have any experience with G DATA?
I humbly ask for your insight and although you people are probably a lot younger than me, your expertise will go a long way to help me. If you have any tips to make my phone more enjoyable please pass them along!
Thank you!
Ok so now I have a new problem! I disabled developer options. Then restarted my phone. Don't ask me why! Now the OEM unlock is off too. So when I restarted I guess it says custom binary blocked by FAP lock"
What do i do now? please I have been messing around with this all day and am tired! I didn't get anything else done i was supposed to get done! I'm so fkn fat and lazy!
fat35yo said:
Ok so now I have a new problem! I disabled developer options. Then restarted my phone. Don't ask me why! Now the OEM unlock is off too. So when I restarted I guess it says custom binary blocked by FAP lock"
What do i do now? please I have been messing around with this all day and am tired! I didn't get anything else done i was supposed to get done! I'm so fkn fat and lazy!
Click to expand...
Click to collapse
Blocked by FRP lock...
You'll need to reflash stock firmware with Odin, go to SamMobile and you'll find what u need there.
---------- Post added at 07:03 AM ---------- Previous post was at 07:00 AM ----------
fat35yo said:
So I ended up using chain fire to auto root it. I must've been using the wrong img file. So anyway I've rooted my phone now. I checked with a root checker.
This is the weird thing. I haven't lost any of my data on my phone. All my contacts, texts, and even chrome bookmarks are still there. Is this normal?
Click to expand...
Click to collapse
Samsung devices when you root it you don't actually have to unlock the bootloader (Uh, maybe turning on OEM unlocking in Dev options...) So it doesn't wipe.
PalmCentro said:
You'll need to reflash stock firmware with Odin, go to SamMobile and you'll find what u need there.
Click to expand...
Click to collapse
Thank you so much for your fast and courteous reply!
There are 4 options i see for "Canada" "Rogers" G935W8
I clicked the newest one and its a 2gb download, does that seem right? is there THAT much bloatware?
Am I going to lose all my data now? Should I remove my sd card?
Thanks again!
There are 4 options i see for "Canada" "Rogers" G935W8
I clicked the newest one and its a 2gb download, does that seem right? is there THAT much bloatware?
Am I going to lose all my data now? Should I remove my sd card?
Thanks again!
Click to expand...
Click to collapse
ok so i guess they uploaded another Stock firmware lastnightn before getting an answer here so i Downloaded the newest on. I used ODIN (Thanks SAMMOBILE for making it easy to figure out which file goes where!)
I reset phone with ODIN and everyhting seems to work EXCEPT it won't let me sign in using my Gmail account. it keeps saying "please sign in using one of the owners accounts for this device'"
so now I stuck again!
It's stupid because it sends this phone prompts to verify thru SMS, It even let me reset my Gmail password through a sms verification through my phone. After a bit of reading though, I found out that you shouldn't reset your password for 72 hours or something! I dunno! I'm just skimming articles to try and fix this phone!
I tried signing into Google from my tablet. I verified that the s7 trying to access my account was in fact me. I then tried signing into the s7 to no avail. I'll keep posting my updated. Oh and administrator....I'm not just trying to get my 10 posts!
PalmCentro said:
Blocked by FRP lock...
.
Click to expand...
Click to collapse
Yea I realize that now...just thought it was a developer with a sick (but awesome) sense of humour??!!
Ok I'm pretty sure I found the info I needed here: https://productforums.google.com/fo...c;context-place=topicsearchin/gmail/icyseraph
I guess all it took was a little gugling