Just updated the latest version of CM 11 nightly on my phone...20140102.. Restarted it was 28 % within 10 min of use it was 17% + the phone back is heating.... This cannot be explained!!! Pls help CM guys.. I'm depending on ure OS.....
Sent from my LG-D802 using Tapatalk
Did you reboot into recovery, wiped cache, dalvik and fix permissions?
Did you try a clean install? (Formatting system and data and dalvik and cache)?
You didn't by any change recovered any apps+data? Best not to.
Also did you check logcat for errors?
Try settings>development (6taps on build in settings>about so see development) then corresponding CPU utilization option, so you can see what's running on CPU most of the time?
All above are best practices m8, goodluck
Related
I'm on CM7 RC7.1 right now, thinking of flashing nightly 252. Can I just flash it right over, should I do a full wipe before flashing?
I've always done full wipes when flashing a new nightly or RC. Not sure if this is necessary and it's a pain to do the full setup everytime. Basically, wondering when it's okay to just flash a new nightly right over my current ROM.
TIA
You should be able to flash the nightly without a problem. As long as you're sticking to CM7 it SHOULD all work.
But, as always, make a backup of you ROM using Clockwork and your data using Titanium (Or whatever Apps you prefer) before you flash.
If it gets borked with the update, you can always just revert to the saved backup and start over with wiping the second time. Then you can reinstall everything easily using the data backup.
poprocks01 said:
I'm on CM7 RC7.1 right now, thinking of flashing nightly 252. Can I just flash it right over, should I do a full wipe before flashing?
I've always done full wipes when flashing a new nightly or RC. Not sure if this is necessary and it's a pain to do the full setup everytime. Basically, wondering when it's okay to just flash a new nightly right over my current ROM.
TIA
Click to expand...
Click to collapse
I was always told that if you are staying in the like OS you can just update. However if you are going from from one [format] to another you need to wipe.
meaning
RC --> RC : no wipe
Nightly --> Nightly : no wipe
Stable --> Stable : no wipe
rc --> nightly : wipe
nightly -- > official : wipe
and around the circle we go.
but the poster above me is 100% always do a back up before flashing anything.
neidlinger said:
RC --> RC : no wipe
Nightly --> Nightly : no wipe
Stable --> Stable : no wipe
rc --> nightly : wipe
nightly -- > official : wipe
and around the circle we go.
Click to expand...
Click to collapse
Interesting .....
According to this logic I would need to wipe since I'm going from RC to nightly. Irt appears the nightlies have stopped for the time being. Maybe something big is coming soon. I may wait to see ... Thanks guys!
I went from CM7.1 RC1 to various nightly builds, then back and forth between nightlies and gigglebread builds without doing any wipe at all, and everything seems to be working fine.
Of course, I am not sure if it will work for everyone and there may be issues hiding for me which I haven't yet had the chance to discover but most things that I use on daily basis (phone, messaging, e/gmail, 3G, Wifi, BT, cameras etc etc) are operational, and the only fc I ever had is waze (gps application) force closing immediately after booting (although it is definitely not on auto start list)- afterwards it just behaves normally.
I do nand backup and check its md5 (and of course for the rom I'm about to install).
Hi everyone,
I got this Rom installed + Glados 2.3 Kernel on my I9023EU.
This combo solved:
-ICS increased battery drain: lazy governor, 100 mhz min freq
-lag in app drawer
Issues:
-font installed not properly displayed
-random reboots (no OC)
any hint?
EDIT:
-WiFi staticIPs not working ... when asked for subnet mask, only the last segment is to be inserted. Then it works..
EDIT 2:
-upgraded to GlaDOS 2.4
NEW ISSUES (not related ti the upgrade, i dare to say):
-BLN BLINKING: if when unlocking, lights are in the off-phase of blinking, the remain off.
-DSP MANAGER 2.0: Equalizer is not working
Thanx a lot
No problem with the ROM NexusBeam 4.1.0, but I didn't change the kernel...
Maybe, if i have any time this weekend, I'll try to install Glados 2.3 Kernel.
I will report issue(s) if I have some.
Try to use the new matr1x kernel
anyone of you heard about wipe cache/dalvik/data
even AFTER having flashed NB4.1. ?
someonedon'trememberwho said this solved some probs..
No problems with Nexus Beam, the best rom at all (imho).
Now i've tryed to use Glados 2.3
Have you wiped data/factory and cache before installing Nexus Beam?
pastikk said:
Have you wiped data/factory and cache before installing Nexus Beam?
Click to expand...
Click to collapse
yep. and someone says also after... what about it?
I encountred some random reboots while making a call with 3G enabled.
Random reboots seem to have disappeared after reinstallation. This time I flashed nb4.1 and glados2.4 at once, without reboot inbetween.
Still short battery life and no correct fontinstall
Sent from my Nexus S using XDA App
a) Random reboots. We've all experienced them; Mine seem to come up quite often, no matter what rom I have installed. Whether it be CM7, CM9, MIUI, etc... it usually happens after returning from "sleep mode" (locking the screen)
b) Also, is there a way to make the nook run SMOOTH (for christ's sake...)??
I've tried V6 supercharger, and I haven't felt that much of a difference.
As for specs, I have my nook overclocked to 1200mhz, with the governor on "interactivex".
c) BATTERY LIFE. I've heard people using there nooks for quite a long period of time before needing to recharge.. is there any trick to this? I'm getting 3-5 hours of use on a normal day. It's supposed to have the same battery as the Nook Tablet... and same screen resolution.. sigh..
solutions anyone?
Thanks in advance.
Well, I'm currently running the MiRage rom and it runs fine. No random reboots. Do you use a time/weather widget? Sometimes these can cause occasional problems. I wouuld think it might be an app that is causing these problems, as I've used many roms on my nook, including MIUI, without the problems you are describing.
As for low battery, how high is your display brightness set? I have found that to be a big battery hog. Or again, it could be due to certain apps.
I would also suggest doing a clean install of your rom - wipe and reformat. If you are not sure of the procedure, please post.
My nook gets very heavy use on a daily basis and I get a full day after a nightly charge. Look for a thread in the general section for the nook by mr72 - a guide for CM 7.10 setup. Lots of useful info there.
Sent from my NookColor using xda premium
How many updates have you installed on your nook color? I have found that you should only update a few times before you will start seeing problems with your cyanogenMod builds.
CyanogenMod uses modified kernels so you should wipe both your data and your caches after a few updates to keep from corrupting your kernel base. Make sure to backup first with a nandroid backup so you can restore your apps and settings afterwards. Constantly re-flashing and updating your cyanogenmod builds just leads to problems without doing a full data wipe once and awhile. ALWAYS wipe your dalvik caches on each update.
The easiest way to wipe both your data and caches is to use clockworkmod in your included ROM manager.
~~~~~~~~~~~~~~~~
I have not experienced any of the issues you are claiming with the latest stable of cyanogenMod 7.2 on the nook color, but I make it a issue with myself to wipe both the data and the caches on the eMMC of my nook color , which is the way I am using cyanogenMod, after a couple of updates. YOU will especially will have to wipe both the data and caches when you upgrade from gingerbread ported versions of cyanogenMod to the ICS versions, those kernels are way modified. I have worked on some through the github.
I tried many CM7 nightlies and newer CM9 also.
Very rarely to have a restart (freeze up are bit more often) and battery lasts for 9–10 hours with full use.
Something might be wrong with your hardware or no good install of Roms.
How long do you have it? Did you get it new or used?
Produced by NookColor at ICS 4.0.4
Hello Friends,
I am having Red Lens Defy with 24/09 CM10 running on it. ROM is quite stable and working fie but I am facing Battery drops issues as well as heating issue for my handset. This is my only handset which i use for day to day usage.
I would like to go ahead with 2ndinit ROM by almighty Quarx but i am not willing to wipe my data for it. I have some concerns regarding ROM. I would appreciate if you can help me out...
1. Is it possible moving to 2nd Init ROM from 24/09 CM10 without wiping the Data? Have anyone tried? Are there any consequences doing so?
2. Is it recommended to Daily usage as this is my only phone. Anyone Tried with Airtel India(preferably Mumbai)?
3. Are there any issues noticed in 3G connnection(i use it daily)?
4. Can someone help me with steps to install this ROM without wiping data? Or is it same as upgrading nightlies?
Thanks & Regards,
Sameer
I try to change ROM s without wipe, for me it ends with a never ending reboot. u can try it, but the chance that it worked is not that good I think, just make a full backup before and if it fail restore it.
there is a free program on the PlayStore (appextractor) with that u can restore ur apps from a nand backup with there data.
Jelly powered.Defy
i went from 24.09 to 18.10 just wiping cache and dalvik cache without any problem, make sure to make a backup just in case and try it
So is it a daily usable ROM?
yes
Jelly powered.Defy
I'm using Stock Rom 4.4.2 + Franco Kernel Nightliyes and I can't arribe to 2,5 hours of SOT, with omnirom and the same use i can easily achieve 4,5 hours SOT, this problem starts when i was beggining to use xpossed, any ideas? Recommendations? Thanks in advance
I have same configuration except flashed dalvik and bionic optimized + touch control but having 3.5 hours of SOT and total 19-20 hr of battery. Did you try wiping cache and dalvik cache ? (I did not tried onmirom maybe it is normal )
Xposed and gravitybox usually can't create such drainage problems.
And why you think they are responsible for that?
Can you provide BBS screenshot before ready to charge?
Unleashed by my Nexus 4
Scrye said:
I have same configuration except flashed dalvik and bionic optimized + touch control but having 3.5 hours of SOT and total 19-20 hr of battery. Did you try wiping cache and dalvik cache ? (I did not tried onmirom maybe it is normal )
Click to expand...
Click to collapse
Yesbi did
Enviado desde mi Nexus 4 mediante Tapatalk