[Q] Att forcing update - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

just got s4 yesterday. Came with mf3 Now this morning att is pushing an update to my phone... how do I stop it? Anytime I use wifi it startes back to downloading. .. Dont know what it is, or if it will make my wait longe4 for a safe way in, I assume if its from att, its not good! So how can I stop it???

With MF3 your pretty much stuck already. You can root it and install safestrap for MF3 but you are limited to Touchwiz based 4.2.2 Roms. Check out the threads for WHICH ROMS work for it.
The update your getting is most likely the MK2 4.3 firmware. With it you can root and install SafeStrap for MK2, there are some Roms you can run with it but they have to be Touchwiz Roms and based on 4.3 firmwares.
So basically if I was in your shoes I would just take the 4.3 update and root and install Safestrap for MK2. Then flash ShoStock MK2 for a BETTER than Stock experience.
If you could have gotten the S4 with MDL or MDB firmwares you could have used motochopper+casual to root and install an actual full recovery and flash anything you want. But those are hard to find unless you check Swappa for one with eiher of those firmwares.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337

klloyd said:
just got s4 yesterday. Came with mf3 Now this morning att is pushing an update to my phone... how do I stop it? Anytime I use wifi it startes back to downloading. .. Dont know what it is, or if it will make my wait longe4 for a safe way in, I assume if its from att, its not good! So how can I stop it???
Click to expand...
Click to collapse
If I were u.......turn off your wifi and take your att sim card off. ....... and also take your sd card out..... format it to EXfat and follow jortex new root for MF3 firmware. .... so when u rooted. ...u can install titanium back up from play store. ...and uninstall Att software update.apk then u should be ok..... but like RockRatt said.....since from now on everything moving forward with 4.3 base rom. ..... it should be nice to have 4.3 firmware. ......as of right now u able to root using saferoot method or kingo method and u can also install Safestrap recovery v 3.71 ..... Goodluck. .... ..
SWYPED_FROM_S4_MF3_REDVENOM

Unlucky you. Man id be pissed. Good news though im pretty sure google editions work with safestrap which still gives you 4.4. That's ofcourse if kit kat interests you

Thanks guys. I knew to disable the wifi for short term fix. I went ahead and held tight with the MF3 factory software. You guys are correct it is at 4.2.2. I did the root and quarantine of the updater. I just feel that I might be best waiting... I'm afraid that what ever comes down may make everything worse. I'll keep this and hold tight till something comes along that we can odin into it easy... I'm sure it wont be too awful long as this is a popular phone.
If anyone seeing my post is looking for the same thing, its here:
http://forum.xda-developers.com/showthread.php?t=2387577&nocache=1
If I remove all this ATT bloat, will it harm anything? Dont know what will trip the rom up and make it a nice paper weight. There is NOTHING of att software.

klloyd said:
Thanks guys. I knew to disable the wifi for short term fix. I went ahead and held tight with the MF3 factory software. You guys are correct it is at 4.2.2. I did the root and quarantine of the updater. I just feel that I might be best waiting... I'm afraid that what ever comes down may make everything worse. I'll keep this and hold tight till something comes along that we can odin into it easy... I'm sure it wont be too awful long as this is a popular phone.
If anyone seeing my post is looking for the same thing, its here:
http://forum.xda-developers.com/showthread.php?t=2387577&nocache=1
If I remove all this ATT bloat, will it harm anything? Dont know what will trip the rom up and make it a nice paper weight. There is NOTHING of att software.
Click to expand...
Click to collapse
Use titanium backup to FREEZE at&t bloat and update software. You never know what you'll need or want in the future.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

Related

[Q] Getting my S4 on Tues, have some questions to rom/root it.

So I am upgrading from my beloved S3 to the Red S4 now, getting it in on Tues. Thank you employee line deals.. So anyways, I saw some stickies about to avoid the OTA otherwise can not flash a diff kernel, correct? That there are no odin files of the new update.
That being said, How will I know when I get my device in, if they already gave it to me updated or if its where I can custom rom it. Would figure its a certain thing in the status menu part for a version. Dont wanna mess this up, so doing my research now.
Also any custom roms that are super worth it? I know on my S3, I use a nice one with the multi window and floating windows. So if there is a super good one to use, IF I can use one, what is it?
Also does the toolbox program we used for the S3 work for S4? (Havent checked on updates in awhile) cause I need to least root this sucker if I wanna restore my titanium backups.
Anyways thanks for any points in the right direction, this is the part I always hated.. working with a new phone then sitting with it till I study up on all the roms and tweaking of it.
When you get your device got to settings>more>about device and if the the last three characters of the baseband is MF3 then you can only use stock kernels with safestrap recovery and if it is MDL or MDB you can have custom recovery, custom roms with motochopper root. There are some pretty good roms out there. Unfortunately i'm on MF3 cause i got the OTA and it updated overnight.
Also when you first get your box with the phone inside. Look on the outside of the box and it will show which firmware is on it. It will have the last three letters of mdb, MDL, or MF3. All I can say is HOPE for MDL which may or may not be possible. But the red colored ones do not seem to go as fast so HOPEFULLY it is MDL.
Next course of action IF it is MDL is DO NOT connect to WiFi, and I would also suggest NOT putting in the Sim card yet. Download Motochopper by Jbliss and or Casual+motochopper by Adam Outler which will root and install tarp recovery. Then read up from there and flash a ROM.
If it comes with MF3 then you will need to flash SafeStrap to be able to out "some Roms" onto your phone and have root. But safestrap is more limited than what you are used to/what I posted in the paragraph above.
I am GUESSING you are buying it from ATT? Then chances may be slim of anything other than mf3. But I did get a MDL from Walmart (they had black and white if I remember correctly, not sure about red). I got a black one with MDL about a month ago and they had two others in stock. So places like that MAY be a better bet for you.
Now this is MY opinion and take it for what it is worth. I will NEVER be buying another ATT phone due to how hard they are locking the boitloaders down. NEVER... So my next suggestion is get a T-Mobile S4 and you can use it on ATT and it does not have locked bootloaders at this time and hopefully never.
Read all the sticky threads about MF3 and prepare yourself in case you want to keep it. Good luck to you
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
You will have to try out different roms and see for yourself what they have to offer.if it turns out to be MF3 take the most important advice "!!READ!!"
Sent from my GT-I9505 using XDA Premium 4 mobile app
Before you get your phone read a whole lot about it. Read all the pinned (stickies) threads first. Then keep reading before you do anything with it. Good luck!
RockRatt said:
Also when you first get your box with the phone inside. Look on the outside of the box and it will show which firmware is on it. It will have the last three letters of mdb, MDL, or MF3. All I can say is HOPE for MDL which may or may not be possible. But the red colored ones do not seem to go as fast so HOPEFULLY it is MDL.
Next course of action IF it is MDL is DO NOT connect to WiFi, and I would also suggest NOT putting in the Sim card yet. Download Motochopper by Jbliss and or Casual+motochopper by Adam Outler which will root and install tarp recovery. Then read up from there and flash a ROM.
If it comes with MF3 then you will need to flash SafeStrap to be able to out "some Roms" onto your phone and have root. But safestrap is more limited than what you are used to/what I posted in the paragraph above.
I am GUESSING you are buying it from ATT?
Click to expand...
Click to collapse
Yes, getting from ATT dealer accounts, while I know I can use T-Mobiles stuff, I wouldnt have the "LTE" ability, which is what is happening now with my TMO S3, I have 4G, yes, but not LTE. So giving that phone to my friend for her upgrade, so she can get LTE with TMO while upgrading myself. Now if I am MDL, then woot, I take it its almost business as usual with the way I worked my roms and so of the past?
Then lets say I am MF3, now that in itself. may not be "as bad" since honestly, the S3's rom was pretty solid out of the box, just root it and go. Could I assume if I dont wanna put a diff rom on MF3, I could least root the stock rom easy enough and move on? (Plus could use titanium backup to remove the bloat) Seems abit crazy on MF3 and safe strap, sounds like its using the internal storage space to run the rom off of.
Now in regards to if I am MDL, I assume you mean download motochopper for the pc, then hook up and let it run. Now after that point, is my phone safe from OTA? Do I need to install a new rom right then and there or can I use stock rom and know that I am safe from it updating to MF3. Just making sure I got my notes right for tm morning when it comes in by fedex heh.
Qbeezy24 said:
When you get your device got to settings>more>about device and if the the last three characters of the baseband is MF3 then you can only use stock kernels with safestrap recovery and if it is MDL or MDB you can have custom recovery, custom roms with motochopper root. There are some pretty good roms out there. Unfortunately i'm on MF3 cause i got the OTA and it updated overnight.
Click to expand...
Click to collapse
So there is no difference in MDL and MDB? Or was MDL still better? Sounds like really the next couple days are gonna be research and testing.. thats after I put my screen protector on it heh.
Mysticales said:
Now if I am MDL, then woot, I take it its almost business as usual with the way I worked my roms and so of the past?
Click to expand...
Click to collapse
Yes it would be almost exactly business as usual. Of course READ any Roms HOW TO INSTALL section. About the only difference from the S3 flashing is if you are flashing kernels/Roms make sure the are loki'd or use Loki doki during flashing. Again read up on this.
Mysticales said:
Then lets say I am MF3, now that in itself. may not be "as bad" since honestly, the S3's rom was pretty solid out of the box, just root it and go. Could I assume if I dont wanna put a diff rom on MF3, I could least root the stock rom easy enough and move on? (Plus could use titanium backup to remove the bloat) Seems abit crazy on MF3 and safe strap, sounds like its using the internal storage space to run the rom off of.
Click to expand...
Click to collapse
Yes you can flash some Roms (4.2.2 based Roms) with Safestrap. Read all about safestrap as I do not have it and don't know many if the answers since I cannot test. But the one thing is be VERY CAREFUL removing bloat with tibu, once it is gone you will NOT be able to get it back. Read many horror stories if debloating gone wrong and phone not working.
Mysticales said:
Now in regards to if I am MDL, I assume you mean download motochopper for the pc, then hook up and let it run. Now after that point, is my phone safe from OTA? Do I need to install a new rom right then and there or can I use stock rom and know that I am safe from it updating to MF3. Just making sure I got my notes right for tm morning when it comes in by fedex heh.
Click to expand...
Click to collapse
Yes download either Motochopper or I like "Casual+Motochopper" as it gives you a recovery as well. Either cwm or twrp.
No at that point it is NOT safe from OTA updates, you will need to FREEZE certain apps with tibu.
Check out the Roms section. I haven't used it but I believe there is a "neutered mf3 stock firmware" that has the ota updating parts removed already. If you do NOT freeze the apps ATT set up mf3 to Auto Download and INSTALL mf3. Most users got it while they were sleeping, even if they were only stock and rooted. But IF you have a custom recovery and a ROM on it you will not get the auto update and install.
Mysticales said:
So there is no difference in MDL and MDB? Or was MDL still better? Sounds like really the next couple days are gonna be research and testing.. thats after I put my screen protector on it heh.
Click to expand...
Click to collapse
MDB was what came with the phone and MDL was updated within a few weeks if I remember correctly. I believe I still have the mdb bootloaders on my phone and my wife's came with MDL and has those bootloaders. I have seen NO DIFFERENCE as far as flashing or things working differently in my case.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
So, being on MF3 will not allow us to flash kernals and we are limited to specific Roms? Are those the major differences? Also, should we stay away from the OTA...I keep hearing about it.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
nash2000 said:
So, being on MF3 will not allow us to flash kernals and we are limited to specific Roms? Are those the major differences? Also, should we stay away from the OTA...I keep hearing about it.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes I believe you cannot flash kernels with safestrap. And only 4.2.2 based Roms will work and possibly on tw Roms, but there might be one cm variant that would work. Just check out the safestrap thread for more info on all if this. I think they even have a list if tested working Roms there.
No one knows FOR SURE but I believe the new 4.3 update blows a second qfuse, this will make it so you cannot downgrade to anything lower than MJ6.
MF3 blows the first qfuse which is why you cannot downgrade to MDL bases.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
Well I have a mf3 gs4 :/ sooo now then. I don't "mind" stock really too much.. ill miss my drop down toggles I thing more from my gs3. I saw one post that explains using terminal to get root access which is something I know I need for sure. So now then those on mf3 are you too staying on stock and just rooting?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Mysticales said:
Well I have a mf3 gs4 :/ sooo now then. I don't "mind" stock really too much.. ill miss my drop down toggles I thing more from my gs3. I saw one post that explains using terminal to get root access which is something I know I need for sure. So now then those on mf3 are you too staying on stock and just rooting?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Kingo root method is an easy one click method that works also. Why stay stock when you can root easily? I was rooted but now on 4.3.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
I just got my phone!!!! I got mine at Costco which I normally get my phone through best buy but there insurance plan stinks now.
Anyways, My phone had the MDF!! So get your phone at Costco!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
[email protected] said:
Kingo root method is an easy one click method that works also. Why stay stock when you can root easily? I was rooted but now on 4.3.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Of course I am rooted... you think after being a pioneer with a beloved Htc G1, that I would EVER be on a device without root. =p (Man.. the reinstalling of a 100 apps manually alone without titanium backup along with its prefs, config and data would take a week to get right) I used that exFat method.
But yea, even tho I am rooted, I wouldnt "mind" a diff rom.. or least debloat this sucker. Half tempted to see which ATT apps I could get rid of, issue is... no odin to restore to if something messes up. I am sure someone will do a mf3 recovery sometime eh?
Oh... btw, how would I disable any auto OTA that could come in the future?

MF3, MD5, 4.3...Ive gotten myself lost

I purchased my S4 shortly after its release...around the beginning of the summer.
I immediately rooted it and, at the advice of these forums, froze with Titanium Backup the service that calls for OS updates (so I wouldnt loose the ability to roor, custom backup and ROM). I am running stock ROM on a rooted phone and for now dont intend to put anything custom on.
I know since then there have been a number of updates, none of which I have received as I have frozen my update service.
Im totally unaware of what improvements, if any, these updates may have brought and am wondering whether I should allow AT&T to update my phone (and get whatever benefits come from 4.3, etc.) or whether I should stick to my 4.2.2 which (I think) is the MF3 that people recommended Id want to preserve.
Advice?
Thanks.
lirong said:
I purchased my S4 shortly after its release...around the beginning of the summer.
I immediately rooted it and, at the advice of these forums, froze with Titanium Backup the service that calls for OS updates (so I wouldnt loose the ability to roor, custom backup and ROM). I am running stock ROM on a rooted phone and for now dont intend to put anything custom on.
I know since then there have been a number of updates, none of which I have received as I have frozen my update service.
Im totally unaware of what improvements, if any, these updates may have brought and am wondering whether I should allow AT&T to update my phone (and get whatever benefits come from 4.3, etc.) or whether I should stick to my 4.2.2 which (I think) is the MF3 that people recommended Id want to preserve.
Advice?
Thanks.
Click to expand...
Click to collapse
If you really have no interest in roms then you can go ahead and update. I'm on mf3 on a rom, so am not 100% sure on root, but it looks like some people have been able to upgrade and keep root, you might want to look more into that. But if you have no interest in roms and you can update and still root then I would say go for it.
However, if you are pre mf3 that's when it becomes tricky. If you are pre mf3 and update you lose a lot of freedom with ROMs. So if you have interest in other roms and are currently pre mf3, I would stick with pre mf3 and not update.
lirong said:
I purchased my S4 shortly after its release...around the beginning of the summer.
I immediately rooted it and, at the advice of these forums, froze with Titanium Backup the service that calls for OS updates (so I wouldnt loose the ability to roor, custom backup and ROM). I am running stock ROM on a rooted phone and for now dont intend to put anything custom on.
Click to expand...
Click to collapse
I'm kind of in the same position, and I've been wondering the same thing.
I got my S 4 in May 2013. It came with 4.2.2 on MDL. I immediately rooted and froze the update service. I installed a custom recovery with the intention of exploring newer roms at some point, but I'm not sure what I'm missing by staying on 4.2.2 vs. 4.3. So much of the activity now surrounds the capabilities of 4.3, that I am feeling a bit left out!
mikew99 said:
I'm kind of in the same position, and I've been wondering the same thing.
I got my S 4 in May 2013. It came with 4.2.2 on MDL. I immediately rooted and froze the update service. I installed a custom recovery with the intention of exploring newer roms at some point, but I'm not sure what I'm missing by staying on 4.2.2 vs. 4.3. So much of the activity now surrounds the capabilities of 4.3, that I am feeling a bit left out!
Click to expand...
Click to collapse
Youre one of the few that actually still have a custom recovery! Use it to your advantage to flash a MK9 rom, as I think thats the latest software version from samsung
Sent from my GT-I9505 using Tapatalk 2
bennyboy78 said:
Youre one of the few that actually still have a custom recovery! Use it to your advantage to flash a MK9 rom, as I think thats the latest software version from samsung
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
All Canadian variants can run custom recovery. No locked bootloaders in canada. However doing so, does trip knox. If you don't care about knox, and have an sgh-i337m then custom recovery away. This includes latest mk6 jb4.3
Sent from my SGH-I337M
Here's my $.02
If you STILL have MDB or MDL bootloaders that CAME on your phone keep the same bootloaders and DO NOT UPDATE with the OTA's.
You can find Roms JUST LIKE YOUR ON that are PURE STOCK 4.2.2 MF3 or PURE STOCK 4.3 MK2 without losing any of the functionality of those on the 4.3 or 4.2.2 stock firmwares.
OR you can use some STOCK BASED Roms Like ShoStock-MF3 that has some added benefits WITHOUT sacrificing anything. Or try even NEWER 4.3 Roms Like ShoStock-i 4.3 MK8 with all the added benefits of stock firmwares with some slight added benefits as well. Basically if you keep your original bootloaders you CAN DO anything you WANT without sacrificing what those users lost by upgrading or buying with MF3 or newer already installed.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
And like "RockRatt" +$.02
I know for myself I haven't been on MDL for a long time so until this nut gets cracked I'm up to date .those that are pre MF3 should hold on to what you have. cause like I tell most normal people that don't mess with there phones like we at XDA do that have a problem with there stock phone.Samsung devs do the same thing as XDA devs do minus the mad improvements/mods , so expect bugs of any sort from either. What I'm getting at is pre MF3 you have the option to find perfection using "Loki".
I will add that the newest update (MK2) runs pretty good
ROOTED ATT MK2 using Tapatalk

At stock MF9 rooted... What now?

On my Sprint Galaxy S4 (SPH-L720). I want to upgrade to the newest OTA, keep root, get rid of KNOX, and unlock it for domestic use. I also want a really safe backup option that assures me an easy recovery in case of softbrick (flashed enough to know, expect it).
I read around, but it seems a little bit more complicated than the other devices I've had. Just want to make sure I do it in the right order, so I won't mess anything up and get stuck.
Tapatalkin' from my SGS4
DizturbedOne said:
On my Sprint Galaxy S4 (SPH-L720). I want to upgrade to the newest OTA, keep root, get rid of KNOX, and unlock it for domestic use. I also want a really safe backup option that assures me an easy recovery in case of softbrick (flashed enough to know, expect it).
I read around, but it seems a little bit more complicated than the other devices I've had. Just want to make sure I do it in the right order, so I won't mess anything up and get stuck.
Tapatalkin' from my SGS4
Click to expand...
Click to collapse
Start with this guide that Mudavo wrote... http://forum.xda-developers.com/showthread.php?t=2277480 it tells you how to keep the MF9 bootloader. All the Knox headache comes with upgrading the bootloader. After that read around theres plenty of opinions on backups.
DizturbedOne said:
On my Sprint Galaxy S4 (SPH-L720). I want to upgrade to the newest OTA, keep root, get rid of KNOX, and unlock it for domestic use. I also want a really safe backup option that assures me an easy recovery in case of softbrick (flashed enough to know, expect it).
I read around, but it seems a little bit more complicated than the other devices I've had. Just want to make sure I do it in the right order, so I won't mess anything up and get stuck.
Tapatalkin' from my SGS4
Click to expand...
Click to collapse
I've been using Philz touch recovery, very easy to use nice interface. Just my opinion.
Sent from my SCH-I545 using XDA Premium 4 mobile app
I think I just did exactly what you want to do. I was on rooted, stock, MF9, and went to rooted stock MK2 using the info in this thread:
http://forum.xda-developers.com/showthread.php?t=2586586
It's just 2 steps...flash the ROM and flash the MK2 modem (instructions provided in the thread). The ROM is already rooted.
Definitely make a nandroid of your current setup at minimum before moving on. Because this method avoids the MK2 (or MJA) bootloader, you can go back to MF9 if you don't like the results, by flashing your nandroid and the MF9 modem.

[Q] KitKat OTA (NC4) and SU Survival Mode

I've read in a couple places of people having success taking the the NC4 OTA on their stock rooted device with SU Survival Mode on and being able to keep root after the update.
I was just wondering if any has tried that and if they were successful or not, thanks!
I know some people just want root, but really what other point is there to doing this?? This sounds just like what happened over in the S3 forum when people who wanted 4.3 ota so desperately they ended up getting hard bricks and relocked bootloaders.
Taking the OTA, you are giving up kernel modules on NC2 and the ability to go back to MJE if you need. For anyone that missed it, read this thread about why NC2 is unique. Just flash NC4 baseband (http://forum.xda-developers.com/showpost.php?p=52633373&postcount=391), and stay on NC2 til devs cook up a safe NC4 to use. What Im doing if you ever want to use kexec in the future for aosp roms when it comes
I successfully did this.
I had to Odin back to stock 4.3 because OTA would fail, but once that finished and re-rooted with Kingo I took the update in survival mode retaining root.
I'm one of those just wanting root.
Sent from my SM-N900V using XDA Premium 4 mobile app
NeoMagus said:
I know some people just want root, but really what other point is there to doing this?? This sounds just like what happened over in the S3 forum when people who wanted 4.3 ota so desperately they ended up getting hard bricks and relocked bootloaders.
Taking the OTA, you are giving up kernel modules on NC2 and the ability to go back to MJE if you need. Just flash NC4 baseband, and stay on NC2 til devs cook up a safe NC4 to use. What Im doing if you ever want to use kexec in the future for aosp roms when it comes
Click to expand...
Click to collapse
Well, I'm one of the people that only care about simple root access, so that's why I'm curious.
NeoMagus said:
I know some people just want root, but really what other point is there to doing this?? This sounds just like what happened over in the S3 forum when people who wanted 4.3 ota so desperately they ended up getting hard bricks and relocked bootloaders.
Taking the OTA, you are giving up kernel modules on NC2 and the ability to go back to MJE if you need. Just flash NC4 baseband (http://forum.xda-developers.com/showpost.php?p=52633373&postcount=391), and stay on NC2 til devs cook up a safe NC4 to use. What Im doing if you ever want to use kexec in the future for aosp roms when it comes
Click to expand...
Click to collapse
Jeez I shouldnt have even said anything about being able to take the OTA w/survival mode.
Theres nothing wrong with taking it if you guys have no issue with not being able to change kernels in the future or downgrade with Odin. If you screw up the survival process though and lose root, beans has already said it will probably be a very long time til there will be an exploit
http://forum.xda-developers.com/showpost.php?p=52603311&postcount=12
http://forum.xda-developers.com/showpost.php?p=52609797&postcount=42
Theres nothing on NC4 coming from NC2 worth losing that imo it shouldnt be long til you see NC4 roms in the dev section pre rooted. But its your phone, and we all take our own risks.
matt_1224 said:
Jeez I shouldnt have even said anything about being able to take the OTA w/survival mode.
Click to expand...
Click to collapse
Thank you for doing so - it is appreciated by many. Sometimes people get caught up in their own circumstances and cannot appreciate that not everything is so black and white.
Sent from my SM-N900V using XDA Premium 4 mobile app
Like I said, it worked for me after doing some pre-maintenance.
My thought process was that being it'll probably be close to a year before Verizon releases another update... I plan to jump ship before I see another OTA.
That, or the awesome Devs here that give Big Red the finger and find ways to do the impossible.
Sent from my SM-N900V using XDA Premium 4 mobile app
Reilly1812 said:
Sometimes people get caught up in their own circumstances and cannot appreciate that not everything is so black and white.
Sent from my SM-N900V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You mean some people rush to have the newest things, that they dont realize what they are giving up for it.
http://forum.xda-developers.com/showthread.php?t=2750875
This thread already exists in Q&A and was simply trying to save some headaches now as well as down the road for those who don't know...
again if all you care about is root on your phone... nobody is stopping you from the attempt
There is already a thread for this:http://forum.xda-developers.com/showthread.php?t=2750875
Thread closed and moved to Q and A like its supposed to be.

Note 3 flashing and updating

I just got myself a Verizon Note 3. This is one power house of a phone. I noticed the kid I got it from does have it rooted. The only annoyance I see is allot of stuff is showing in the status bar with Chinese writing. is this normal or did he use some dumb way to root it? Also it still has 4.3 on it. I tried to update it but I get the message that "software update is currently unavailable". Is this because the Note is rooted?
I have done some searching and I did get the files for flashing it back to stock. Odin, .mkz, and the Samsung drivers. So if this update message is because it's rooted, I do have the stuff to flash it back to stock. I do also know how to use Odin as it's the same program for flashing the Note 1, which I did have. But any insight you guys can give me would be great. Thanks
cougar214 said:
I just got myself a Verizon Note 3. This is one power house of a phone. I noticed the kid I got it from does have it rooted. The only annoyance I see is allot of stuff is showing in the status bar with Chinese writing. is this normal or did he use some dumb way to root it? Also it still has 4.3 on it. I tried to update it but I get the message that "software update is currently unavailable". Is this because the Note is rooted?
I have done some searching and I did get the files for flashing it back to stock. Odin, .mkz, and the Samsung drivers. So if this update message is because it's rooted, I do have the stuff to flash it back to stock. I do also know how to use Odin as it's the same program for flashing the Note 1, which I did have. But any insight you guys can give me would be great. Thanks
Click to expand...
Click to collapse
Check out this post of mine. It will point you in all the right directions : http://forum.xda-developers.com/showpost.php?p=55003142&postcount=3
Since you're on MJE 4.3 see this thread and go to post 2 NC2/MJE instructions...http://forum.xda-developers.com/showthread.php?t=2787627
Thanks for the info gamer but I'm not looking to root or flash roms. with this phone. At least not yet anyway. It's new to me so I really need to be as familiar with it as possible before I go flashing roms and tweaks and such. I'm not familiar with the names MJE, NC2, NC4 etc. so trying to explain that to me is just like speaking German to me right now. All I want to do for the here and now is get it back to stock un rooted 4.3, take the update to 4.4.2, and then check on the need for root then.
I also will need to look into what's safe to flash, what needs to be run, app wise, in order to flash some things. Take for instance my last phone, lg optimus g pro, you needed an app called freegee to get past the bootloader. If you screwed that up, you bricked yer phone. I'm sure some of the processes for this phone are similar in that respect. So no fiddling for me just yet. So in short, could you just tell me in simple terms if I have the correct stuff to flash it back to stock?
I currently have the latest Samsung drivers, Odin 3 V3.0.9, and the tar file named "ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5.7z"
Is this what is needed to flash it to stock 4.3? Also, if you don't mind, could you tell me if there is ANY way, a modem flash perhaps, to get my LTE working with this AT&T Straight Talk sim card? Currently I am getting H+ which isn't bad but it's no LTE. Thanks a bunch.
EDIT: Well, that was easy. My computer ran the Verizon software and it failed to update it so it did the repair and repaired it with kitkat. So one issue solved. Now If I can just get LTE working on here it would be great....lol
cougar214 said:
Thanks for the info gamer but I'm not looking to root or flash roms. with this phone. At least not yet anyway. It's new to me so I really need to be as familiar with it as possible before I go flashing roms and tweaks and such. I'm not familiar with the names MJE, NC2, NC4 etc. so trying to explain that to me is just like speaking German to me right now. All I want to do for the here and now is get it back to stock un rooted 4.3, take the update to 4.4.2, and then check on the need for root then.
I also will need to look into what's safe to flash, what needs to be run, app wise, in order to flash some things. Take for instance my last phone, lg optimus g pro, you needed an app called freegee to get past the bootloader. If you screwed that up, you bricked yer phone. I'm sure some of the processes for this phone are similar in that respect. So no fiddling for me just yet. So in short, could you just tell me in simple terms if I have the correct stuff to flash it back to stock?
I currently have the latest Samsung drivers, Odin 3 V3.0.9, and the tar file named "ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5.7z"
Is this what is needed to flash it to stock 4.3? Also, if you don't mind, could you tell me if there is ANY way, a modem flash perhaps, to get my LTE working with this AT&T Straight Talk sim card? Currently I am getting H+ which isn't bad but it's no LTE. Thanks a bunch.
EDIT: Well, that was easy. My computer ran the Verizon software and it failed to update it so it did the repair and repaired it with kitkat. So one issue solved. Now If I can just get LTE working on here it would be great....lol
Click to expand...
Click to collapse
You can flash different modems in Odin but I don't know if they'll get you running on AT&T Straight Talk, someone else will have to chime in on that.
Att straight talk might work if you have the correct apn settings but you will not get 4g
Sent from my SM-N900V using XDA Premium 4 mobile app
Yeah I am finding this out Roger. I want to root and enable the hidden menu. I am seeing posts about doing this and getting the 4g LTE working. The problem is most of these posts pertain to the T-Mobile branded note 3.

Categories

Resources