Related
Hi all, there are many roms un development section but i m confused which one to flash...can someone help me? Which one is the fast smooth JB rom? And with which kernal?? Currently using PA2.54 very slow...
Sent from my Nexus S using xda app-developers app
There is dozens of this exact thread in the Nexus S forums. A few active and talking right now in this very sub forum. Its all a matter of personal opinion. Do some searches, read some reviews, flash and try and base your decision by your use cause no one uses their phone the same way with the same signals.
Sent from my Nexus S 4G using xda app-developers app
You seem new to roms, its probably best for you to start out with this combination:
ROM: Cyanogenmod 10 Nightlies
Kernel: Default CM10 kernel
or
ROM: Rasbeanjelly
Kernel: Trinity kernel
Also heres a popular list of roms and kernels
ROMs: CM10 Nightlies, Slimbean, Blackbean, Rasbeanjelly, Strawberry
Kernels: Marmite, Matrix, Trinity, Air
You can find all of them here.
wana7262 said:
Hi all, there are many roms un development section but i m confused which one to flash...can someone help me? Which one is the fast smooth JB rom? And with which kernal?? Currently using PA2.54 very slow...
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
Fast and smooth? Stock OTA JB 4.1.2 and _thalamus kernel.
ej8989 said:
Fast and smooth? Stock OTA JB 4.1.2 and _thalamus kernel.
Click to expand...
Click to collapse
yea i m new to rom actually this is my 1st android phone... i was using symbain for last 3 years... now moved towards android... can u give me a link of Stock rom 4.1.2? and i have a little question can i flash stock rom without wipe data?? currently on Paranoid Android 2.54...
Thanks
wana7262 said:
yea i m new to rom actually this is my 1st android phone... i was using symbain for last 3 years... now moved towards android... can u give me a link of Stock rom 4.1.2? and i have a little question can i flash stock rom without wipe data?? currently on Paranoid Android 2.54...
Thanks
Click to expand...
Click to collapse
You need to wipe everything (except sdcard) if you're moving from a different rom (PA)
Just do a nandroid/titanium backup and everything will be fine.
Here's the link to stock, rooted, deodexed 4.1.2 rom: http://d-h.st/t7o
_thalamus 4.1.2 kernel: https://www.dropbox.com/s/mlc10xyx1...3.0.31-666_rel-9-g76bb0a5-20121016-213036.zip
sources:
http://forum.xda-developers.com/showthread.php?t=1854366
http://forum.xda-developers.com/showthread.php?t=1651756
CM10 is your best bet, other ROMs like Rasbeanjelly+Trinity is also good too but it's more likely a gimmick imo.
Definitely start out with CM10. I just recently got into flashing custom ROMs on my Nexus S (was rocking stock for a long time), and CM10 + Marmite kernel (smartassV2, cfq, 200/1000) is my preferred setup.
I've also tried my luck with Slimbean and Strawberry 4.1.2, but both of them always had little annoyances that you simply don't have to worry about with CM10. That being said, the AOSP-based ROMs like Strawberry and Slimbean do run very smoothly. I do plan on trying out AOKP, however, as it has a TON of customization options and appears to be pretty polished overall.
Slim Bean is the best rom for me, but I can customize everything so I have no problem. For most people it's better to use CM10 and the Jelly Bean 4.2 gapps.
Sent from my Galaxy Nexus
eksasol said:
Slim Bean is the best rom for me, but I can customize everything so I have no problem. For most people it's better to use CM10 and the Jelly Bean 4.2 gapps.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
does performance of gaming depends on Kernel? my Nexus S's touch stop responding while playing Modern Combat 3 and NFS Most wanted... what will the problem?
wana7262 said:
does performance of gaming depends on Kernel? my Nexus S's touch stop responding while playing Modern Combat 3 and NFS Most wanted... what will the problem?
Click to expand...
Click to collapse
Both the ROM and kernel can have an effect on gaming performance. Try testing out another kernel to see if anything improves.
Like I said earlier, I highly recommend Marmite for the Nexus S. It has great performance and battery life.
help
Hi, I just rooted my Nexus S (Mobilicity) the first time and I have some question here:
1. Should I just install this CM10 nightly cm-10-20121115-NIGHTLY-crespo.zip (seems to be the latest) ?
2. I found gapps 4.2 here ]highonandroid.com/android-apps/googleapps-4-2-for-android-jelly-bean-roms-gapps/, Can I use this for CM10?
3. Do I need to flash radio for CM10?
fatkinglet said:
Hi, I just rooted my Nexus S (Mobilicity) the first time and I have some question here:
1. Should I just install this CM10 nightly cm-10-20121115-NIGHTLY-crespo.zip (seems to be the latest) ?
2. I found gapps 4.2 here ]highonandroid.com/android-apps/googleapps-4-2-for-android-jelly-bean-roms-gapps/, Can I use this for CM10?
3. Do I need to flash radio for CM10?
Click to expand...
Click to collapse
1. Yes, that's the latest nightly. Should be very stable, as far as I know.
2. DO NOT download that gapps file. The one linked in that article has the old, ugly prototype keyboard and has force closes up the anus. You can search this forum for better packages of the 4.2 Google Apps, but they are all still a little too buggy or incomplete for my tastes.
3. No need to flash a radio. CM will not overwrite your current one.
ScOULaris said:
1. Yes, that's the latest nightly. Should be very stable, as far as I know.
2. DO NOT download that gapps file. The one linked in that article has the old, ugly prototype keyboard and has force closes up the anus. You can search this forum for better packages of the 4.2 Google Apps, but they are all still a little too buggy or incomplete for my tastes.
3. No need to flash a radio. CM will not overwrite your current one.
Click to expand...
Click to collapse
Thanks for your advice, I am using CM10 now. cheers!!!
Hi guys
in my experience, the best combo is:
ROM: CodenameAndroid 3.5.0
Kernel AirKernel stable r2
the battery life is very good, there is no lag and with new ADW launcher, homescreen and drawer are very smooth
Hi guys...
I have a N7 16Gb from october and I think thare's not a real reason to change the rom on this device...except the tablet ui and the general fun to make it!
Well...
I'm not here to ask you guide etc. but an advice.
What custom rom do you advice? many talk about Paranoidandroid but I try it on an old Galaxy Scl and it was pretty horrible and unstable...but on nexus seems the rom most supportend and with much more feature...
Or I'm attracted by the Dirk AOKP that seem pretty good....
Beside this....it's difficult also the kernel decision...
Franco Kernel? or M3 or Trinity? I'm not interested in overclock...
thanks to all in advance
no one?
No one is answering because there are a ton of these threads asked all the time. There is no best Rom or Kernel. Try searching and see what features you like or what sounds interesting and then just install it and see for yourself.
I personally like the Omega 3 kernel, OC is optional and it has just about every scheduler/governor you could possibly want. Performance and battery life are pretty much on par with the other top kernels. I haven't tried any ROMS mainly because the 2 I flashed ended up boolt-looping. So I am using the stock with some pretty major tweaks. I am a DEV on other sites and once I jump through the hoops to be able to post in developer forums I will be posting my own ROM. OC is for people who don't know how to optimize. *cough*
RealPsygnosis said:
I think thare's not a real reason to change the rom on this device...
Click to expand...
Click to collapse
Modaco custom ROM (currently version Jr13) is light, mostly stock, extra features that help me are- prerooted, enhanced power menu, tweaked youtube app for video preload, enhanced quick settings panel, comes with gapps etc.
Modaco cyanogenmod custom ROM (currently version r4) consumes more processing power, based on CM 10.1 so has all its features, prerooted, more enhanced power menu(with screenshot and extended desktop options), tweaked youtube, enhanced quick settings(devoid of vol control), comes with gapps, comes with cyanogenmod file manager etc.
MCR Jr13 and MCMCR r3 are interchangeable with dirty flash so I get to retain all my apps.
M-kernel (currently a33 version) gives me ample undervolting option (lp, cpu, gpu, ram), and I can set minimum brightness with rootdim, so I can extend my battery life.
Sent from my Nexus 7 using xda app-developers app
Don't know why people make thread to ask others what's best rom, kernel... Answers will be different from users and depends what they prefers, so it'll be difficult to make a choice because every answers won't be the same. What I did when i wanted to choose was reading threads and try by myself to see what I liked. Sorry if my answer will not help you to choose but it's the best i can advise you. Hoping you find what best suits you.
Phone: GT-I9100P
Kernel: Dorimanx
ROM: 4.2.1 Vanilla RootBox
Tablet: Nexus 7
Kernel: M-Kernel
ROM: 4.2.1 AOKP PUB
MOD: JusTunBean
Xenon
Im usin Xenon HD its a 4.2 rom (aokp base) and it's very customizable for your likes. You should give it a try.:cyclops:
If you are doing any ROM other than stock, I suggest AOKP for sure. It has a ton of mods for your ui and allows a lot of customizing. Make sure you get 4.1.2 milestone version and get your gapps as well or you won't have necessary files. Hope this helps look in the aokp official thread for download
Sent from my Nexus 7 using xda app-developers app
thanks to all...
all advices are really usefull to understand the mod world...
I was intent to install an AOKP rom, but I don't really understand the difference...
I would like to try the the paranoid but i think is AOSP...
for AOKP I don't know what rom to try...I see the Dirty AOKP but I'm not sure....
There's also one called smooth ROM check it out, you should search YouTube to see if you like it. personally I'm back to the to the 4.1.2 stock rom because on aokp it wasn't allowing me to install some APK's from the play store that i really wanted. it said they werent compatible with my device when I knew they were compatible with n7.. I wish there was a way around that but nobody on here would tell me if there was or not when i posted a thread asking... anyways hope you find what you are looking for and I do suggest checking YouTube first for custom Roms for nexus 7 before flashing over hella different ones it would take less time, peace and good luck!
Sent from my Nexus 7 using xda app-developers app
RealPsygnosis said:
no one?
Click to expand...
Click to collapse
I'm running Rootbox right now. Smooth with tablet mode
Sent from my Nexus 7 using xda premium
So searching comes up with >1 year old threads and not really answering my question.
I got a used N4 recently for my daughter, and I want it to be as fast and stable as possible. I unlocked, then ADB flashed the currrent Google image and then rooted, made it ART runtime and applied the Z2 Bionic lib zip, applied current Franco kernel. Then I was halted in terms of is that the fastest?
Is that best combination which exists right now?
Is CM11 better?
I didn't really form a concluson of the Z2 Dalvik lib vs ART.
From what I know, this patch is currently faster than ART itself:
http://forum.xda-developers.com/nexus-4/general/4-4-4-4-x-qualcomm-optimized-dalvik-t2546120
Since ART is 'experimental' right now of course it lacks of improvements, but I am sure if Android L is released this October this wouldnt be the case anymore.
Also some Custom Roms like Cyanogenmod has its own optimized bionic libs, sometimes better than the stock ones or any patches. I highly recommend you to try this out, because than you dont have to search and compare no more.
In terms of kernel, I would not recommend you to use franco's kernel on a Custom Rom. Make sure to use any other kernel. This is just my personal experiences with franco's kernel and someone might call me too dumb to use this kernel, but why do I have so much trouble with franco and every other kernel runs fine like matr1x, ak or semaphore? Judge for yourself
CCody said:
From what I know, this patch is currently faster than ART itself:
http://forum.xda-developers.com/nexus-4/general/4-4-4-4-x-qualcomm-optimized-dalvik-t2546120
Since ART is 'experimental' right now of course it lacks of improvements, but I am sure if Android L is released this October this wouldnt be the case anymore.
Also some Custom Roms like Cyanogenmod has its own optimized bionic libs, sometimes better than the stock ones or any patches. I highly recommend you to try this out, because than you dont have to search and compare no more.
In terms of kernel, I would not recommend you to use franco's kernel on a Custom Rom. Make sure to use any other kernel. This is just my personal experiences with franco's kernel and someone might call me too dumb to use this kernel, but why do I have so much trouble with franco and every other kernel runs fine like matr1x, ak or semaphore? Judge for yourself
Click to expand...
Click to collapse
Right so I saw the claim that sticking with Dalvic and using the optimised Dalvik lib is faster but I gave up keeping track of it as too much "feels" and "benchmarks aren't representative" conclusion.
Noting to avoid Franco with custom ROMs. The custom one I did was CM and Franco warns to not use it!
nigelhealy said:
So searching comes up with >1 year old threads and not really answering my question.
I got a used N4 recently for my daughter, and I want it to be as fast and stable as possible. I unlocked, then ADB flashed the currrent Google image and then rooted, made it ART runtime and applied the Z2 Bionic lib zip, applied current Franco kernel. Then I was halted in terms of is that the fastest?
Is that best combination which exists right now?
Is CM11 better?
I didn't really form a concluson of the Z2 Dalvik lib vs ART.
Click to expand...
Click to collapse
the fastest.. whatever im using.
but really, these kinds of threads arent allowed on xda since you are asking us to compare roms. oh, ill clue you in a little, cm isnt even close to the fastest. and no, franco kernel isnt the fastest either.
Best ROM/kernel threads are not allowed on XDA
The best bet is to head over to the development sections and try some out for yourself and see which combination suits you best
Thread closed
I just got my S4 (GT-I9505) from my dad. I'm really excited but I don't know where to start. What should I do first now that I have it? Should I root it first? What is the best Rom and Kernel for this device? Any advice would be much appreciated!
If I were you I will perform a factory reset first This model has many ROMs, you may try each of them and find out your favorite one.:cyclops:
LeoYL said:
If I were you I will perform a factory reset first This model has many ROMs, you may try each of them and find out your favorite one.:cyclops:
Click to expand...
Click to collapse
Would you happen to know which one is the most popular rom right now? Or the best one? Or how about the best Rom for gaming?
Likach said:
Would you happen to know which one is the most popular rom right now? Or the best one? Or how about the best Rom for gaming?
Click to expand...
Click to collapse
i will suggest Halcyon ROM
quite smooth compare to other juz my opinion have a loot for it
http://forum.xda-developers.com/galaxy-s4/i9500-develop/phoenix-rom-i9500-t3101153
shingz96 said:
i will suggest Halcyon ROM
quite smooth compare to other juz my opinion have a loot for it
http://forum.xda-developers.com/galaxy-s4/i9500-develop/phoenix-rom-i9500-t3101153
Click to expand...
Click to collapse
I have i9505 though. I don't think it's compatible?
Once you're rooted and running custom recovery you can multiboot it, (run multiple custom Roms) all information is in this thread: http://forum.xda-developers.com/showthread.php?t=2864469
Alucard's kernel should give you good perfomance.
Or Hulk kernel. With hulk you can overclock the up to 2.1 Ghz. But I feel like Alucard gives you better performance (when running 1.9).
As for the roms, they are all pretty much the same.
I've tried Sabermod CM12.1, Resurrection Remix, AICP 9, FlexOS.
They pretty much have the same performance (judging by the UI speed).
Haven't tried the SlimLP builds yet.
I also tend to return to the GPE rom. It's 5.0.1 though.
The reason I keep coming back to GPE is that I have pretty much no problems with it. Very stable.
In benchmarks you will get the same score on all roms. I got an average of ~32000 on all the above mentioned roms.
So, in the end it will come down to how the rom feels (fast ans smooth or slow and laggy) to the user.
GDReaper said:
Alucard's kernel should give you good perfomance.
Or Hulk kernel. With hulk you can overclock the up to 2.1 Ghz. But I feel like Alucard gives you better performance (when running 1.9).
As for the roms, they are all pretty much the same.
I've tried Sabermod CM12.1, Resurrection Remix, AICP 9, FlexOS.
They pretty much have the same performance (judging by the UI speed).
Haven't tried the SlimLP builds yet.
I also tend to return to the GPE rom. It's 5.0.1 though.
The reason I keep coming back to GPE is that I have pretty much no problems with it. Very stable.
In benchmarks you will get the same score on all roms. I got an average of ~32000 on all the above mentioned roms.
So, in the end it will come down to how the rom feels (fast ans smooth or slow and laggy) to the user.
Click to expand...
Click to collapse
Any experience with CyanogenMod? When I click the ROM tab, CyanogenMod is listed first so I'm thinking that it is the most popular right now. Do you have any info on how good or how stable the mod is?
Also, quick question. When flashing a rom, I know that I wipe the cache and dalvik cache before flashing. But should I also wipe these 2 after wiping?
Likach said:
Also, quick question. When flashing a rom, I know that I wipe the cache and dalvik cache before flashing. But should I also wipe these 2 after wiping?
Click to expand...
Click to collapse
Not necessary but yo can
ooer! woa there cowboy! It's new. Take your time to explore and understand how it all works then once you get that feeling that you're sure this or that could be better that's the moment when you can think about rom flashing.
I loved the phone when I got it. I then thought hey, I'll flash cyanogen on it. That worked well for a time (and they're getting better and better with each version).
I then went a while with a danvdh's excellent google edition rom (imho a very good compromise for the minimalist).
I finally came full circle back to a TW based rom (for info the Imperium v9) with which I am most happy.
Through all that I discovered that what I wanted most was an excellent camera, good video player and good battery life, all of which come included in TW roms.
The Imperium or other roms bring nice tweaks and optimisations all of which came from that famous itch that every geek has for making things that bit better.
duxxyuk said:
ooer! woa there cowboy! It's new. Take your time to explore and understand how it all works then once you get that feeling that you're sure this or that could be better that's the moment when you can think about rom flashing.
I loved the phone when I got it. I then thought hey, I'll flash cyanogen on it. That worked well for a time (and they're getting better and better with each version).
I then went a while with a danvdh's excellent google edition rom (imho a very good compromise for the minimalist).
I finally came full circle back to a TW based rom (for info the Imperium v9) with which I am most happy.
Through all that I discovered that what I wanted most was an excellent camera, good video player and good battery life, all of which come included in TW roms.
The Imperium or other roms bring nice tweaks and optimisations all of which came from that famous itch that every geek has for making things that bit better.
Click to expand...
Click to collapse
If I were to play taxing games, which rom would you suggest? I'm in a tie up between Cyanogen and Google Play Edition.
Likach said:
If I were to play taxing games, which rom would you suggest? I'm in a tie up between Cyanogen and Google Play Edition.
Click to expand...
Click to collapse
In bechmarks both roms give the same scores. So there isn't much to say about that. CM does feel a bit faster in my opinion. But I don't know if it offers any noticeable advantage. Unless you're willing to run android 5.0 and ktoonsez kernel (which offers CPU and GPU overclock and Is only available for CM).
Wich ROM, mod, kernel or combination of two of them give me the best experience in android?? I m looking for an Android system fast, smooth and best battery life. Thanks to all
If something was the best, nothing else would be used as there's no point in using something that's inferior when you can get something better.
There is no best, I suggest you read each thread and pick one that suits your needs. Saying X ROM and kernel is the best is like saying a specific vehicle is the best...One may say a Ferrari and another may say an F-350. But who's right?
Some people like roms and kernels bloated with 1000 customization options filled with placebo "optimization and enhancements". Others prefer a clean, minimal ROM without all the useless bling that they'll never use.
P.S. there's probably 10 threads like these, and possibly 11 by next week that you could've read through. I'll just copy and paste this same post on the next one.
Sent from my Nexus 6P using Tapatalk
Currently using PureNexus nougat with ElementalX kernel. The experience is pretty good.
Using the phone for SMS/MMS, YouTube and web browsing. I can get ~ 5/6h sot with a full charge on WiFi and ~ 3h30 sot on 3g/LTE which is enough for me.
Also using custom CPU governor profile in EXKernel Manager helped me with battery life without affecting performance (at least not that I noticed). You can find more infos here:
https://forum.xda-developers.com/nexus-6p/general/guide-advanced-interactive-governor-t3290605
Hope that helps
I am using the stock ROM with the ElementalX Kernel. Very happy with the performance of the phone. I arrive at the end of the day with 40% battery on average
yamilmanzur said:
I am using the stock ROM with the ElementalX Kernel. Very happy with the performance of the phone. I arrive at the end of the day with 40% battery on average
Click to expand...
Click to collapse
Wich version of stock are using?? I was use that option but I had some issue with stock.
5.1 said:
Currently using PureNexus nougat with ElementalX kernel. The experience is pretty good.
Using the phone for SMS/MMS, YouTube and web browsing. I can get ~ 5/6h sot with a full charge on WiFi and ~ 3h30 sot on 3g/LTE which is enough for me.
Also using custom CPU governor profile in EXKernel Manager helped me with battery life without affecting performance (at least not that I noticed). You can find more infos here:
https://forum.xda-developers.com/nexus-6p/general/guide-advanced-interactive-governor-t3290605
Hope that helps
Click to expand...
Click to collapse
Thanks for your answer. I had a boot loop when I install pure Nexus, Gapps, ElementalX and super su. But I like this option. Wich Gapps recommend?
hpagliettini said:
Wich version of stock are using?? I was use that option but I had some issue with stock.
Click to expand...
Click to collapse
7.1.1 ROM stock
hpagliettini said:
Thanks for your answer. I had a boot loop when I install pure Nexus, Gapps, ElementalX and super su. But I like this option. Wich Gapps recommend?
Click to expand...
Click to collapse
Hi. Gapps included in the OP of thePureNexus thread. OenGapps will work too.
Another "best rom" thread? Seriously ?
Pure
F2FS + Dark ROM + FLASH kernel ! That's the best combination and I am a serial flasher
These people that are saying there isn't a best ROM, I don't really understand the reasoning behind this. There most certainly is a best ROM kernel combination. Otherwise all these ROMs and kernels would be exactly the same right? Sorry to say, some are better than others. This is just a fact.
If you want speed, smoothness, glass, breakneck speeds, great battery life, there really is one only choice.
Uber rom by Chad and faster kernel by Chad.
Why?
On f2fs, (trust me, you want f2fs) I have yet to find kernel or ROM combination that beats this.
Its the only rom that's built with GCC 6.3.1, and the only rom built with clang 3.9.1. Coupled with f2fs, this rom FLIES.
I have flashed every single ROM on this forum and then some, and I'm telling you this is the best combination you can possibly hope for:
https://temp.bbqdroid.org
NOTilyass said:
F2FS + Dark ROM + FLASH kernel ! That's the best combination and I am a serial flasher
Click to expand...
Click to collapse
How much sot do you have with this combination?
You flash f2fs + dark ROM + Gapps + flash kernel in one time?
TrainNanpaMaster said:
These people that are saying there isn't a best ROM, I don't really understand the reasoning behind this. There most certainly is a best ROM kernel combination. Otherwise all these ROMs and kernels would be exactly the same right? Sorry to say, some are better than others. This is just a fact.
If you want speed, smoothness, glass, breakneck speeds, great battery life, there really is one only choice.
Uber rom by Chad and faster kernel by Chad.
Why?
On f2fs, (trust me, you want f2fs) I have yet to find kernel or ROM combination that beats this.
Its the only rom that's built with GCC 6.3.1, and the only rom built with clang 3.9.1. Coupled with f2fs, this rom FLIES.
I have flashed every single ROM on this forum and then some, and I'm telling you this is the best combination you can possibly hope for:
https://temp.bbqdroid.org
Click to expand...
Click to collapse
Uber rom by Chad I definitely agree is the best. I tried using his faster angler but it caused problems with mods like viper4arise so I am sticking with flash kernel. Uber by Chad is definitely the best rom though and I have tried so many roms like pure nexus, resurrection remix, dirty unicorns, sixRom, lineage, cyanogenmod, nitrogen, Cortex and so many more.
Is the stock camera working on either Uber or Dark ROM with f2fs file system?
Thanks
There's no such thing as a best rom fact, but only best rom opinions, which isn't a good idea to ever discuss here. [emoji14]
As for battery, that all depends on you as a user to manager your battery life your way. I get 4+ SOT easily and I listen to a lot of music and text a lot.
As for what I'm using, I'm running ABC Rom with franco.kernel, root, and V4A. ?
Sent from my Nexus 6P using Tapatalk
TrainNanpaMaster said:
These people that are saying there isn't a best ROM, I don't really understand the reasoning behind this. There most certainly is a best ROM kernel combination. Otherwise all these ROMs and kernels would be exactly the same right? Sorry to say, some are better than others. This is just a fact.
If you want speed, smoothness, glass, breakneck speeds, great battery life, there really is one only choice.
Uber rom by Chad and faster kernel by Chad.
Why?
On f2fs, (trust me, you want f2fs) I have yet to find kernel or ROM combination that beats this.
Its the only rom that's built with GCC 6.3.1, and the only rom built with clang 3.9.1. Coupled with f2fs, this rom FLIES.
I have flashed every single ROM on this forum and then some, and I'm telling you this is the best combination you can possibly hope for:
https://temp.bbqdroid.org
Click to expand...
Click to collapse
In this link I download the Uber ROM, right?
And other thing, you say me I have to flash to f2fs first before install this ROM and kernel?? Or I don't have to flash previous?
DEVILOPS 007 said:
Uber rom by Chad I definitely agree is the best. I tried using his faster angler but it caused problems with mods like viper4arise so I am sticking with flash kernel. Uber by Chad is definitely the best rom though and I have tried so many roms like pure nexus, resurrection remix, dirty unicorns, sixRom, lineage, cyanogenmod, nitrogen, Cortex and so many more.
Click to expand...
Click to collapse
I'm using faster kernel (r63) with Viper for arise with no problems at all bro. What's your steps for flashing?
I'm using 2.4 alpha B.
TrainNanpaMaster said:
I'm using faster kernel (r63) with Viper for arise with no problems at all bro. What's your steps for flashing?
I'm using 2.4 alpha B.
Click to expand...
Click to collapse
I basically just wiped cache and dalvik/art cache and flashed the rom and kernel and all my mods. I also made sure to do stuff like rename audio effects and everything I did to make it work with flash. I use stable 2.4 deutronomy aroma installer. I was talking to someone else on this rom and kernel and he said he had the same problem too so it might be hit and miss or maybe you flashed it different than us. Please tell.me what you did to get it to work. Thanks
What partitions do you guys convert to f2s besides cache? Data as well? Everything else remains ext4?
Running stock has been great for me lately. Downgraded to 6.0.1 running Xposed for pixel mods. Amplify and greenify. With exkernel has been a great experience so far. Near 7h SOT yesterday. Will be going back to 7.1.1 soon, as the February update is out.. I heard lineage OS has good battery life. Will be trying that out soon in a few days.
Read the threads on XDA and good luck!!:good: