Hi,
After updating my i9506 with 4.3, my phone is not recognized anymore by Odin in download mode.
Since the wifi is not working, I want try to reinstall again the 4.3 using Odin but I saw in another thread that Odin is not supported with 4.3. Is it true?
Is there another method to install a firmware without using Odin?
Thx in advance.
Spaïro said:
Hi,
After updating my i9506 with 4.3, my phone is not recognized anymore by Odin in download mode.
Since the wifi is not working, I want try to reinstall again the 4.3 using Odin but I saw in another thread that Odin is not supported with 4.3. Is it true?
Is there another method to install a firmware without using Odin?
Thx in advance.
Click to expand...
Click to collapse
If u have android 4.3, try install again Kies3 with the new drivers. Odin have to recognize it :highfive:
Joku1981 said:
If u have android 4.3, try install again Kies3 with the new drivers. Odin have to recognize it :highfive:
Click to expand...
Click to collapse
:good:
Was not working reinstalling Kies3 but I installed directly the driver without Kies and it's ok, thx.
But same wifi issue
Spaïro said:
:good:
Was not working reinstalling Kies3 but I installed directly the driver without Kies and it's ok, thx.
But same wifi issue
Click to expand...
Click to collapse
I hope u flashed the correct firmware: HERE.
Yes was this one, thx.
I will see if someone else get the same issue in coming days.
Related
Hi All,
I'm new GT-i5800 owner and have mangaged to flash my phone with ODIN
so its using I5800XXJPQ.tar.
And now Kies ver.2.0.2.11071_128, States that this is not upgradeable.
If there afix for this problem so Kies will upgrade my phone.
I have searched for some time on this site and on the web for a solution, and sadly I've not found a solution.
Can any tell me if the is a fix for this and what I need to do to correct this problem.
Many Thanks
Whimick
Whimick said:
Hi All,
I'm new GT-i5800 owner and have mangaged to flash my phone with ODIN
so its using I5800XXJPQ.tar.
And now Kies ver.2.0.2.11071_128, States that this is not upgradeable.
If there afix for this problem so Kies will upgrade my phone.
I have searched for some time on this site and on the web for a solution, and sadly I've not found a solution.
Can any tell me if the is a fix for this and what I need to do to correct this problem.
Many Thanks
Whimick
Click to expand...
Click to collapse
Is the XXJPQ version you flashed a deodexed one? because if it is Samsung Kies will probably don't recognize the phone/firmware en therefore it can't find a new update.
Flashing with odin is much reliable than with Samsung kies so just search on this forum for the last firmware or a custom rom en flash it with odin
Yes flash with odin
Hi,
Thanks for the rapid replies.
I would still like to use Kies to update my phone.
Does this mean there isn't a fix?
If not what is the latest firmware I can update it with using Odin?
And where do I get it from?
Thanks
Whimick
Whimick said:
Hi,
Thanks for the rapid replies.
I would still like to use Kies to update my phone.
Does this mean there isn't a fix?
If not what is the latest firmware I can update it with using Odin?
And where do I get it from?
Thanks
Whimick
Click to expand...
Click to collapse
you could try to flash one of the stock roms in this tread
XXJPS is the last version i think (but isn't listed there)
Thanks for the suggestion to use a stock rom.
I tried that but sadly it does not work.
Is ther a fix
Whimick said:
Thanks for the suggestion to use a stock rom.
I tried that but sadly it does not work.
Is ther a fix
Click to expand...
Click to collapse
Than you have to search to the stock rom on samfirmare.com or this site and flash it with odin normaly your phone must be recognized by your pc (these stock roms have a bootloader so maybe this will work)
Maybe you could't try to re install the drivers from the g3 do re install samsung kies
maybe you have launcher pro installed. ive go to applications en uninstal launcher pro. then connect your phone to pc in samsung kies mode. then update your firmware.
Hi All,
Installed GT-I5800_NEE_I5800XXJPS_I5800NEEJP2_I5800XXJP4_I5800XXJPS and all seems back to normal now, as Kies now say that no updates are available.
Thanks
Greeting all
dear guys I am facing this issue, SM-N9005 does not support initializing.
when I am trying to go back stock firmware through Samsung Kies 3
does any buddy can do for me the helpful!! :crying:
I Tried trying install drivers and re setup kies 3
Note: I did not root or any customization recovery or any mods.
Thank you and best regards.
baherkilani said:
Greeting all
dear guys I am facing this issue, SM-N9005 does not support initializing.
when I am trying to go back stock firmware through Samsung Kies 3
does any buddy can do for me the helpful!! :crying:
I Tried trying install drivers and re setup kies 3
Note: I did not root or any customization recovery or any mods.
Thank you and best regards.
Click to expand...
Click to collapse
You could try and activate developer opinions and turn on USB debugging it might help
Go to settings, about and tap the build number 5 times that will open developer op
jaythenut said:
You could try and activate developer opinions and turn on USB debugging it might help
Go to settings, about and tap the build number 5 times that will open developer op
Click to expand...
Click to collapse
Thank you for your replay
I'll try & I'll come back
regards.
Sorry ...
but not yet fix
pls help
baherkilani said:
Sorry ...
but not yet fix
pls help
Click to expand...
Click to collapse
what are you trying to do down grade firmware
jaythenut said:
what are you trying to do down grade firmware
Click to expand...
Click to collapse
thank you for your replay
I am trying to rollback stock rom ..
tanks
baherkilani said:
thank you for your replay
I am trying to rollback stock rom ..
tanks
Click to expand...
Click to collapse
you cant sammy wont let you do that anymore
Roll back to stock Firmware ? or roll back the stock firmware aka Downgrade?
If it's downgrade, you cannot.
To go back to stock make sure you have the correct USB drivers installed and KIES should work for you. Or alternatively grab your stock ROM from sammobile and flash it via ODIN.
Just seen you had installed the drivers, Check you have the right version of KIES installed, as there are two options from samsungs site. Or just try ODIN
radicalisto said:
Roll back to stock Firmware ? or roll back the stock firmware aka Downgrade?
If it's downgrade, you cannot.
To go back to stock make sure you have the correct USB drivers installed and KIES should work for you. Or alternatively grab your stock ROM from sammobile and flash it via ODIN.
Just seen you had installed the drivers, Check you have the right version of KIES installed, as there are two options from samsungs site. Or just try ODIN
Click to expand...
Click to collapse
thank you for your replay
if I flash it using ODIN knox counter will not effect?!
thanks
baherkilani said:
thank you for your replay
if I flash it using ODIN knox counter will not effect?!
thanks
Click to expand...
Click to collapse
If using Stock ROM and you haven't already rooted previously then No. If you have rooted then depending on your chosen root method, it may have been tripped.
jaythenut said:
you could try and activate developer opinions and turn on usb debugging it might help
go to settings, about and tap the build number 5 times that will open developer op
Click to expand...
Click to collapse
what ..if phone is dead and facing this issue
You require a service repair for your Note 3 .
Noob question ahead!
I have International Galaxy S4 i9505 and I’m currently on rooted stock rom “i9505vjuemj6″ (zto) brazil android 4.3. I can not update OTA because of “modified device issue” and also can not update via Kies it says “GT-i9505 does not support initialization”.
Can I download “I9505VJUEMKE_I9505DGTEMKE_DGT” venezuela android 4.3 and flash it using odin to fix everything above?
- If not, which latest stock ROM do you recommend to install?
- Any description for this? “GT-i9505 does not support initialization”.
For install updates for android 4.3 u only need Kies 3, no Kies. I recommend u install the updates only with Kies 3 or via OTA. Flashing other firmwares that dont marry with ur region code is create more problems :highfive:
Joku1981 said:
For install updates for android 4.3 u only need Kies 3. I recommend u install the updates only with Kies 3 or via OTA. Flashing other firmwares no for ur region code is create more problems :highfive:
Click to expand...
Click to collapse
Thank you sir, but I have the Kies 3 installed already. I also uninstalled and then re-installed the kies 3. also using OEM usb cable. and the error message persist!
any idea to fix the error?
or even can you point me the best STOCK ROM for my situation?
martikp said:
Thank you sir, but I have the Kies 3 installed already. I also uninstalled and then re-installed the kies 3. also using OEM usb cable. and the error message persist!
any idea to fix the error?
or even can you point me the best STOCK ROM for my situation?
Click to expand...
Click to collapse
Conect it to Kies 3 and make me a screenshot pls :good:
Joku1981 said:
Conect it to Kies 3 and make me a screenshot pls :good:
Click to expand...
Click to collapse
Holy s**t, kies suddenly recognize my phone and says there is an update. :laugh:
i43.tinypic.com/t65853.jpg
same problem
Mate i am having the same problem and tried everything that's been said here. I am however in New Zealand and put a Nordic 4.4.2 on via Odin, but that shouldn't matter because as soon as i put the serial no. in that should fix it and initialise
Joku1981 said:
Conect it to Kies 3 and make me a screenshot pls :good:
Click to expand...
Click to collapse
MadR4sta said:
Mate i am having the same problem and tried everything that's been said here. I am however in New Zealand and put a Nordic 4.4.2 on via Odin, but that shouldn't matter because as soon as i put the serial no. in that should fix it and initialise
Click to expand...
Click to collapse
Dial *#1234# in ur phone and make a screenshot pls :highfive:
ok
Will do and get back to you as soon as i get another firware on, have also contacted Samsung and the'ry look into it too. but cheers if you can help. i'm just mucking around with other options as well at moment. i understand some forums say you cannot roll back the firmware from 4.4.2 to 4.2. I am having the screen rotation problem with the new 4.4.2 so i'm trying to find a way to roll back the FW and one way might be to install a custom rom with old bootloader that is also knox free via CWM install zip function to replace the new 4.4.2 bootloader with an old one. This may then allow me to roll back the firmware to an older version and kill my screen rotation problems.
Joku1981 said:
Dial *#1234# in ur phone and make a screenshot pls :highfive:
Click to expand...
Click to collapse
Pretty sure once you root your phone you can no longer use OTA or Kies, as you now have custom status.
Having said that I've not used kies once since I bought my S4 on April 27th and I change firmware like crazy.
Just use Odin. 9 times out of 10 any problem you have can be fixed by reflash and factory reset.
Sent from my GT-I9505 using XDA Premium HD app
you can use on any modified phone
If Kies lets you initialise the firmware with model and serial no. to the base version for your region for that phone then it will overwrite anything. However in the I9505 case it will not even let you initialise the firmware. Have called Samsung and they confirm they know this is the case but it is not something they will do anything about.
Obagleyfreer said:
Pretty sure once you root your phone you can no longer use OTA or Kies, as you now have custom status.
Having said that I've not used kies once since I bought my S4 on April 27th and I change firmware like crazy.
Just use Odin. 9 times out of 10 any problem you have can be fixed by reflash and factory reset.
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
Sorry about the delay. thanks for trying to help
OK so is this what you were asking for?
Screen rotation a real prob, but all my sensors show pass via *#0*# sensor checks. Tried nordic i9505 I9505XXUFNB9_I9505NEEFNB2_I9505XXUFNB9_HOME.tar 4.4.2, then SIngapore I9505XXUFNBE_I9505OLBFNB3_I9505XXUFNBE_HOME.tar 4.4.2 all the fken same problem. Screen rotation all fine when I flash firmware, root, then flash CWM touch - everything good. Screen rotate works until the first reboot after all of this which might even be a day or 2 later. As soon as reboot phone, screen rotation dies and it is a huge pain in the arse. Sensors continue to say pass via *#0*#. Every few days i have to re-flash firmware, re-root, then re-CWM touch, no need to factory reset just those 3 steps.:crying::crying:and is why i'm trying to figure out whatever methods i can to roll back the firmware to an earlier version but no joy....
MadR4sta said:
Will do and get back to you as soon as i get another firware on, have also contacted Samsung and the'ry look into it too. but cheers if you can help. i'm just mucking around with other options as well at moment. i understand some forums say you cannot roll back the firmware from 4.4.2 to 4.2. I am having the screen rotation problem with the new 4.4.2 so i'm trying to find a way to roll back the FW and one way might be to install a custom rom with old bootloader that is also knox free via CWM install zip function to replace the new 4.4.2 bootloader with an old one. This may then allow me to roll back the firmware to an older version and kill my screen rotation problems.
Click to expand...
Click to collapse
Sorry about the delay getting back. thanks for trying to help
OK so is this what you were asking for?
I know this is part of another thread which I have posted as, but is the reason for all my problems.
Screen rotation a real prob, but all my sensors show pass via *#0*# sensor checks. Tried nordic i9505 I9505XXUFNB9_I9505NEEFNB2_I9505XXUFNB9_HOME.tar 4.4.2, then SIngapore I9505XXUFNBE_I9505OLBFNB3_I9505XXUFNBE_HOME.tar 4.4.2 all the fken same problem. Screen rotation all fine when I flash firmware, root, then flash CWM touch - everything good. Screen rotate works until the first reboot after all of this which might even be a day or 2 later. As soon as reboot phone, screen rotation dies and it is a huge pain in the arse. Sensors continue to say pass via *#0*#. Every few days i have to re-flash firmware, re-root, then re-CWM touch, no need to factory reset just those 3 steps.
:crying::crying::crying::crying::crying:
and is why i'm trying to figure out whatever methods i can to roll back the firmware to an earlier version but no joy....
Joku1981 said:
Dial *#1234# in ur phone and make a screenshot pls :highfive:
Click to expand...
Click to collapse
MY GALAXY S4 SGH-I337 will not work with kies or smartswitch ive tried atleast fourty times and i need help ive tried odin already and it always fails because of write protection and now my s4 is in a bootloop can someone help?
Hello.
I was trying to install (N9005XXUDMJ7_N9005OJVDMJ4_XSI) on my Note3 N9005 4.3 and all went fine until the very end, it suddenly got stuck with a msg saying (Firmware Upgrade encountered an issue. Pls select recovery mode from kies) and nothing happens when I go to recovery mode in Kies!!!
Kindly Help.
Many thanks
What firmware were you on before that?
How did you install? with what
Deleted
Use kies 3 Restore Samsung Firmware .... only solution at this point or use odin again , i.e if you can get into download mode
Edit: delete
fahadali2315 said:
Use kies 3 Restore Samsung Firmware .... only solution at this point or use odin again , i.e if you can get into download mode
Click to expand...
Click to collapse
Kies 3 restore doesn't work.... It's incompatible with the new bootloaders... Wish people would stop giving oout this USELESS information...
If you were on any of the N**(NB4) roms ie Kitkat, you can't go back to the older jellybean roms ie m**(MJ7).
You will have this problem. Just reflash a kitkat rom onto your Note 3 and you'll be fine...
ultramag69 said:
Kies 3 restore doesn't work.... It's incompatible with the new bootloaders... Wish people would stop giving oout this USELESS information...
If you were on any of the N**(NB4) roms ie Kitkat, you can't go back to the older jellybean roms ie m**(MJ7).
You will have this problem. Just reflash a kitkat rom onto your Note 3 and you'll be fine...
Click to expand...
Click to collapse
Edit :First no one asked for your opinion.
Second READ . have you read , he said he flash 4.3 firmware on a 4.3 n9005. So kies works for that. Think and read before you speak.
Sent from my SM-N9005 using Tapatalk
HELP
aawadhi63 said:
Hello.
I was trying to install (N9005XXUDMJ7_N9005OJVDMJ4_XSI) on my Note3 N9005 4.3 and all went fine until the very end, it suddenly got stuck with a msg saying (Firmware Upgrade encountered an issue. Pls select recovery mode from kies) and nothing happens when I go to recovery mode in Kies!!!
Kindly Help.
Many thanks
Click to expand...
Click to collapse
HELLO DOWNLOAD THE FIRMWARE ANDROID 4.4.2 KITKAT
THEN VIA ODIN install it on 3 NOTES FOR DOWNLOAD MODE
SURELY YOU WILL 'FAIL, return it LEVER BATTERY AND GO IN revovery
FAI WIPEDATA / FACTORY RESET
FAI WIPE CACHE PARTITION
LEVERAGE THE BATTERY AND THEN bring it, JOIN IN DOWNLOAD MODE AND DO FLASH BACK KITKAT FIRMWARE 4.4.2 AND YOU PLACE A HELLO:laugh:
fahadali2315 said:
Edit :First no one asked for your opinion.
Second READ . have you read , he said he flash 4.3 firmware on a 4.3 n9005. So kies works for that. Think and read before you speak.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Actually, as he has installed MJ7 on his phone Kies no longer works... My "opinion" is fact...
If you can't stand being corrected because you're wrong then mate, you have a problem... Maybe you should start to read the thread before replying with pointless and useless information....
ultramag69 said:
Actually, as he has installed MJ7 on his phone Kies no longer works... My "opinion" is fact...
If you can't stand being corrected because you're wrong then mate, you have a problem... Maybe you should start to read the thread before replying....
Click to expand...
Click to collapse
The install didnt go through :/ Thats why he is stuck..if he finds my post USELESS (in capital) , then he can say himself.
Sent from my SM-N9005 using Tapatalk
fahadali2315 said:
The install didnt go through :/ Thats why he is stuck..if he finds my post USELESS (in capital) , then he can say himself.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thank you gays, it worked out somehow and now I have Omega 12 installed.
Again, thank you and all the best with the argument...!!
well hello i get my s5 today and i tried to root it its ang3 software but root faild and i cannot go to recovery mode so update kies 3 download software from sammobile G900HXXU1ANG3 use odin 3.09 and start flashing but the problem is it fail atmaybe 80% odin says fail wel its my first day with s5 even i dident pa all price yet sorry for my bad english but i need help please
Do you have the drivers installed on your PC? Without them you can't proceed with anything.
Also you needn't to update via Kies. You can simply download a ROM and flash it via Odin just like you are trying to do for the root method. But in any case you need the drivers to be installed first.
devilsdouble said:
Do you have the drivers installed on your PC? Without them you can't proceed with anything.
Also you needn't to update via Kies. You can simply download a ROM and flash it via Odin just like you are trying to do for the root method. But in any case you need the drivers to be installed first.
Click to expand...
Click to collapse
i have the drivers and latest kies installed maybe its a wrong rom i dont know am tryind another one now hope it will work and what about thoe root why it faild i get cf auto root for my model number and it stop maybe at 40% with odin am not new to android s2 then s3 then s4 now s5 i did root them all but this wont work what i can do to fix it
ahmad_chatila said:
i have the drivers and latest kies installed maybe its a wrong rom i dont know am tryind another one now hope it will work and what about thoe root why it faild i get cf auto root for my model number and it stop maybe at 40% with odin am not new to android s2 then s3 then s4 now s5 i did root them all but this wont work what i can do to fix it
Click to expand...
Click to collapse
Close background process Kies and turn off your anti-virus and try to flash again with the latest version of Odin.
ice [N]ation
ice.modding said:
Close background process Kies and turn off your anti-virus and try to flash again with the latest version of Odin.
ice [N]ation
Click to expand...
Click to collapse
well thanks alot it work fine for me i change the software and all things get good
ahmad_chatila said:
well thanks alot it work fine for me i change the software and all things get good
Click to expand...
Click to collapse
Cool
ice [N]ation
Would this work for my problem?
I'm stuck in Odin Downloading Mode...."can't boot in normal mode"
Flashed with Rom from samsmobile & original from cf-auto. Only get "FAIL".
Mines a Galaxy S5 SM-G900I...
Sent from my PNDPP47GP using XDA Free mobile app