Guys,
Had just bricked my Lenovo TPT. Guess removed the framework.res file by mistake..
Now the device is stuck on Lenovo logo. Recovery menu is working, and I got stock roms downloaded from Lenovo website - but cannot flash them through recovery menu, get errors (something about tmp/sideload/package.zip)
Wiping partition or cache doesn't help either
Wonder if there's any way to flash a new rom using PC - like Odin for Samsung? Do not need any CWM, just a stock ROM would be ok. Odin, or Flashtool for Xperia let the roms be flashed easily, wonder if there's some similar tool for Lenovo.
Thanks!!
Related
Hi,
Guys I need your help on this one.
I sold my A500 almost a year ago to a friend of mine. At that time I flashed it with a HC ROM and Recovery 1.3.4.
Last week the new owner of the tabled asked me for help updating the ROM to JB. Since now I use a Samsung Galaxy I completely forgot on the correct procedures to update the Acer A500. I simply downloaded a 4.2.2 Rom and tried to flash it on recovery mode.
After that I'm stuck with an endless loop. The tabled boots, pass the Acer logo, shows the ROM logo screen and than boot again.
Since I can still acess the recovery screen (it still shows 1.3.4 recovery) I tried flashing other ROMs with no sucess. Every room that uses the Aurora installer freezes as soons as Aurora Installer message shows on the screen. So I wasn`t able to flash a new Rom or a new Recovery (since all the Roms and recovery that I have found uses the Autora installer).
I also tried to install an older room (Tried the Lightspeed 2.1 ROM) and although I was able to flash it and reboot from recovery, it stops on the boot screen after that (I waited for 4 hours).
Can you guys help me with this one? Also, do you guys know if I can install a new Recovery using Odin?
Thanks
Anyone?
Maybe you should try flashing stock rom. Download 》rename it to update.zip》install from sd card or use EUU roms.
poslato sa elmag radija
hello community
After flashing pacman rom
(http://forum.xda-developers.com/showthread.php?t=2400387)
,on a clean wiped device, i accidentaly set it to second boot in this multiboot solution
http://forum.xda-developers.com/showthread.php?t=2447534
using the recovery multiboot utility.
Now i am stuck in the boot animation and cant access recovery (blackscreen and restart).
But i am still able to access boot mode. I tried to flash a different recovery using odin3.07
http://forum.xda-developers.com/showthread.php?t=2397108
http://forum.xda-developers.com/showthread.php?t=2397108
Now I am not shure what to do, maybe odin flashing an official samsung rom?
Thank you for your help
update 03.03:
I odin flashed stock, according to this guide
http://forum.xda-developers.com/showthread.php?t=2265477
After that I odin flashed twrp and restored the efs partition from an nandroid backup.
everything working fine.
I´m out
Samsung GT-I9505 jfltxx (bought from amazon in germany)
bootloader:the one that cam with the frst offiacial kitkat release
pacman rom(alpha)
http://forum.xda-developers.com/showthread.php?t=2400387
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Boot and recovery partitions
Sounds like you messed up boot and recovery sections. Since you can boot up successfully, you may try to flash back to ZUI which changes these two sections completely. If it's not a solution for you, I think the only way to repair is completely format including kernel, system and partitions. You can find the tutorial on Website.
...
you can fix it just use TOOL_ZUK_Z1_ENG_0.0.6
Try flashing COS 12.1 via fastboot.
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
Hi!! I've flashed the NucleaRom too and for a couple of weeks it worked just fine. However one day, out of nowhere, the phone, while still on and working, restarted itself and entered a bootloop. After a few days it restarted normally and lasted a couple of hours but then it all started again. The BIG issue here is that when the phone enters in this bootloop where it remains on for about 15 seconds, it does it either in the system or the recovery/fastboot. I've managed to install two other ROMs via TWRP, when it miraculously remained turned on, but the problem persisted.
Is there a chance your problem was similar? How did you manage to flash via QFIL? I can't enter into that "emergency" or "download mode" in order to flash.
Many thanks in advance
i think that the problem is in the bootloader itself you should try flashing the latest os u have used and instal ordinary unofical lineage nightly (you can find everywhere) by this way your bootloader will be updated to 7.1 after that you can install any software i was having same problem when trying to migrate to lineage os
unable to install Custom ROM's
hi ,,
even i had the same problem like recovery was not accepting any ROMS... if we flash it ll go to recovery again and again,
and later i have flashed CM 13 with image file,, it worked and gone to recovery and updated the update to lineage OS 14.1 with Gapps..
hope it might help u...
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
i am continuously on the boot loop! how to get rid of it?
plz help its been 4 hrs, i think i am in trouble! any possible solutions!!!!
U can try one thing.... Install cm13 with flash file and then restart - - & go to recovery select install update and select lineage 14 and G apps... I did like this . And it worked....
Title says it all. Fastboot works, flashing works. Even if I try to charge the phone on power off condition, it loops infinitely to splash screen. Tried flashing both custom and official ROMs via fastboot. I don't think this is an emmc problem since I can still format and erase all partitions.
Before all of this, I used the official RR Nougat ROM. Everything works fine until it suddenly bootloops out of thin air.
bakanui said:
Title says it all. Fastboot works, flashing works. Even if I try to charge the phone on power off condition, it loops infinitely to splash screen. Tried flashing both custom and official ROMs via fastboot. I don't think this is an emmc problem since I can still format and erase all partitions.
Before all of this, I used the official RR Nougat ROM. Everything works fine until it suddenly bootloops out of thin air.
Click to expand...
Click to collapse
Flash stock firmware with QFIL
mshoaib7 said:
Flash stock firmware with QFIL
Click to expand...
Click to collapse
I have tried to flash via QFIL, but it stopped midway flashing the system and device won't turn on now
I guess it's just me messing up somehow with the cables or something
Thank you anyway mshoaib7!
https://boycracked.com/2016/02/12/e...rmware-any-android-devices-via-fastboot-mode/
Try this one. May help u. Extract from official ROM. And flash those things. System IMG is not needed if u have any old backup means. Flash use this. Go to recovery and restore old one.
Bcz system image is large, so sumtyms it fails to flash. That's y I said lrave the system data image flashing and restore the backup.
mshoaib7 said:
Flash stock firmware with QFIL
Click to expand...
Click to collapse
@mshoaib7 bro you like idli or dosa??
Give it to service centre
bakanui said:
I have tried to flash via QFIL, but it stopped midway flashing the system and device won't turn on now
I guess it's just me messing up somehow with the cables or something
Thank you anyway mshoaib7!
Click to expand...
Click to collapse
bro use downloader the flash tool which is already given in the stock firmware if still it get stuck in the middle then it is driver problem then format u r pc or use friend pc
how to properly revert back from mm or nougat roms to stock kitkat rom?
I was on cm13 by ed300, then I tried to restore nandroid backup of stock kk via twrp
then my phone stuck on boot logo, only fastboot mode works, then flashed twrp and stock kk rom after some attempts.
So what are the steps to successfully revert back to kk? (in case this problem happens again in future)
Hello all, I would like ask you for help. I would like switch back to stock rom, I have twrp working, but cannot find stock fw for twrp. May someone of you make a backup in twrp and send it to me? I tried switch to recovery but recovery does not work, fastboot command only reset tablet. I have backup from stock in 2017, but after restore tablet is still restarting. But going to twrp and flashing android rom is working good.
Thanks a lot