Mobile Data Not working after flashing rom. - Galaxy Note 3 Q&A, Help & Troubleshooting

Hi,
Im currently using the Galaxy Note 3 SM-N9005W8 (Canadian) running X-Note V5.1
The mobile data stopped working (icon won't appear on status bar) after i flashed a custom rom and does not work anymore regardless of which rom i flash, whether is be stock rom or customs.
My mobile carrier is Telus.
Ive tried resetting to default in the access point names but that doesn't work.
anyone know what i can do to get mobile data to work again?

iqxaaron said:
Hi,
Im currently using the Galaxy Note 3 SM-N9005W8 (Canadian) running X-Note V5.1
The mobile data stopped working (icon won't appear on status bar) after i flashed a custom rom and does not work anymore regardless of which rom i flash, whether is be stock rom or customs.
My mobile carrier is Telus.
Ive tried resetting to default in the access point names but that doesn't work.
anyone know what i can do to get mobile data to work again?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2507403&highlight=boot+fix
flash this should work a treat

Related

[Q] Omega ROM on I337M

I successfully flashed i9505 Omega ROM v7 on I337M (Canadian)
Everyhing works fine but the wifi. I can't seem to turn my wifi on.
Tried looking into it, something about flashing a kernel. So I tried but doesn't work...
Anybody else have same problem that can help me?
Did you manually add in your apn settings, because that rom does not add them automatically, and you said you flashed a different kernel, was it one for YOUR device...i337m kernel?
These 2 things will get you data and wifi for sure.
The Ax says good luck!
v11 on i337m
I didn't want to start a new topic as this one seems to be titled correctly and am hoping to keep XDA clean and getting all the Omega Rom and i337m questions in one place.
I installed Omega v11 on my i337m (Samsung s4) and the ROM worked perfectly however I was no longer able to bring up my IMEI number. When entering *#06# my phone would just show a black screen where the number should be shown. I of course got scared and ran around in circles for a while before calming down and flashing stock FIDO firmware. (phone was originally rogers, was unlocked and used on bell then sold to me) I rooted the phone, installed Omega and then had the issue with it not being able to show the IMEI.
Flashed Omega v11 for i9095
(also bought the omega files pro app because it's a bad ass ROM.) Hoping to go back to it but need to clear up this issue.
Any ideas on why this would happen?

[Q] Mobile Data Not Working after flashing custom rom

Hi,
Im currently using the Galaxy Note 3 SM-N9005W8 (Canadian) running X-Note V5.1
The mobile data stopped working after i flashed a custom rom and does not work anymore regardless of which rom i flash, whether is be stock rom or customs.
My mobile carrier is Telus.
Ive tried resetting to default in the access point names but that doesn't work.
Anyone that has the solution?

Canadian ROM only shows 4G signal icon (with LTE speeds) - why ?

Hi all,
I recently bought a Galaxy S4 337M that was rooted and loaded with a custom ROM. I decided to go back to stock so went to sammobile.net and got the latest rogers firmware for my galaxy S4 (which they said was 4.3).
I loaded with ODIN, all went well, rebooted stock, but the max signal icon I can get now is 4G (even though I used speedtest and am getting close to LTE download speeds I think). Any idea why my LTE is gone ? Did I download the wrong ROM ?
I also noticed that none of the APN settings were there and no rogers apps were installed either. Makes me wonder if it was indeed a stock rogers rom after all.
Another strange thing is that it shows me a bell canada navigator update is available in the google play store, yet its not even on my phone. Regardless, even if its a Bell ROM by some chance, Bell Canada has LTE as well, so I am confused.
Btw I used the standard ltemobile APN settings that I always use on all my phones to get LTE (that always work)....
Any help or suggestions would be really appreciated, thanks so much !!!
My iPhone shows LTE using the same SIM...
PS. If I do need to get an original Rogers ROM, is sammmobile not the best place lol ? Any other places to go??
captiv123 said:
Hi all,
I recently bought a Galaxy S4 337M that was rooted and loaded with a custom ROM. I decided to go back to stock so went to sammobile.net and got the latest rogers firmware for my galaxy S4 (which they said was 4.3).
I loaded with ODIN, all went well, rebooted stock, but the max signal icon I can get now is 4G (even though I used speedtest and am getting close to LTE download speeds I think). Any idea why my LTE is gone ? Did I download the wrong ROM ?
I also noticed that none of the APN settings were there and no rogers apps were installed either. Makes me wonder if it was indeed a stock rogers rom after all.
Another strange thing is that it shows me a bell canada navigator update is available in the google play store, yet its not even on my phone. Regardless, even if its a Bell ROM by some chance, Bell Canada has LTE as well, so I am confused.
Btw I used the standard ltemobile APN settings that I always use on all my phones to get LTE (that always work)....
Any help or suggestions would be really appreciated, thanks so much !!!
My iPhone shows LTE using the same SIM...
PS. If I do need to get an original Rogers ROM, is sammmobile not the best place lol ? Any other places to go??
Click to expand...
Click to collapse
I believe that all I337M uses that same firmware but you need a CSC changer to make it change to your carrier as they don't release the specific ones with the carrier apps.
Search "Samsung CSC" in the play store and you should get one.
Thanks for the reply.
Seems I need root - which I deleted when doing a factory restore.
The strange thing is that it was supposed to be a rogers based firmware that I downloaded and flashed.
Maybe something went wrong in the flash.
Will try again.
And check out the CSC
i have a bell i337m and i have the same issue when flashing from a "custom rom to stock" and i have to flash the firmware using odin a second time and than i get my LTE icon enstead of the 4G icon, sounds weird and i can't explain why it takes 2 flashes to get it to show up proper, but it does.
i also have the problem with missing phone vendor apps, the second flash also makes these show up too.
also another thing i noted about my phone is if i don't root and install recovery to wipe, odin will dirty flash my roms, even though odin is supposed to wipe it isn't.
i've tested this to no ends, the results are 100% the same everytime.
Amb669 said:
i have a bell i337m and i have the same issue when flashing from a "custom rom to stock" and i have to flash the firmware using odin a second time and than i get my LTE icon enstead of the 4G icon, sounds weird and i can't explain why it takes 2 flashes to get it to show up proper, but it does.
i also have the problem with missing phone vendor apps, the second flash also makes these show up too.
also another thing i noted about my phone is if i don't root and install recovery to wipe, odin will dirty flash my roms, even though odin is supposed to wipe it isn't.
i've tested this to no ends, the results are 100% the same everytime.
Click to expand...
Click to collapse
After flashing the stock Rom, go back into stock recovery and wipe data and cache, then reboot that should fix it. To fix your csc issue there is a way to do it by dialling a number on your dialpad which includes your imei number then you choose a specific code. Search for it, google
Sent from my SGH-I337M using XDA Premium 4 mobile app
Thanks so much for the replies and help.
I wiped the rom just for fun and rebooted and noticed that its actuality a BELL ROM (all stock BELL apps etc), but when I entered my rogers APN settings it still only showed H+, maybe due to network differences. It's frustrating because I specifically selected a Rogers S4 ROM from Sammobile.net. Any idea where I can get a stock rogers ROM for s4? Also do you think this may have affected my 4G/LTE issue ??
Either way, I will definitely flash the correct ROM twice, and then go back into stock recovery to to wipe data and cache.
Thanks again for all your help
captiv123 said:
Thanks so much for the replies and help.
I wiped the rom just for fun and rebooted and noticed that its actuality a BELL ROM (all stock BELL apps etc), but when I entered my rogers APN settings it still only showed H+, maybe due to network differences. It's frustrating because I specifically selected a Rogers S4 ROM from Sammobile.net. Any idea where I can get a stock rogers ROM for s4? Also do you think this may have affected my 4G/LTE issue ??
Either way, I will definitely flash the correct ROM twice, and then go back into stock recovery to to wipe data and cache.
Thanks again for all your help
Click to expand...
Click to collapse
follow this guide, http://www.droidviews.com/how-to-change-csc-in-samsung-galaxy-phones/ real easy, itll put you back to a rogers rom, all the firmwares on sammobile are BELL ROMS. you have to change the CSC yourself.
THAT WORKED
Thanks so much !!!

[Q] xcover 2 (GT-S7710L) not getting high internet

Hi all!
1. I bought my phone (xcover 2 GT-S7710L) in the states, and when I brought it back with me to Israel, the internet doesn’t work properly. It's very slow, and shows only "G", not 3G, H or H+ like it should. Is there anything that can be done? A new modem?
2. I tried to update it do KK (from JB), and it wouldn't recognize the sim at all. Perhaps it's because I got a rom for S7710 and not S7710L (?) - do you know about a rom that supports the device? I've tried both Vanir and CM11, with no success.
Thanks! Itai
zilmsys have
Did you ever get this figured out? I'm having a similar problem with my GT-S7710L (i'm in the US) after having flashed Rom and recovery for the GT-S7710. Except I have not mobile data at all. I can still text, call, and I have wifi.
nope
alforddm said:
Did you ever get this figured out? I'm having a similar problem with my GT-S7710L (i'm in the US) after having flashed Rom and recovery for the GT-S7710. Except I have not mobile data at all. I can still text, call, and I have wifi.
Click to expand...
Click to collapse
The KK rom (for GT-S7710) i've flashed made the phone pretty useless - sim not working at all.. I manged to flash the JB stock rom, and it is back as it used to be - low speed internet, and a working sim card.

Mobile Data Won't Work.. Have Tried Everything

Hi, so I have a Canadian Samsung Galaxy S4 SGH-I337M.
I recently flashed Synergy's Cyanogenmod 13 that would allow me to run marshmallow as they have discontinued for my model on the official Cyanogenmod site. After I flashed Gapps Pico and everything was working fine until I tried to use mobile data...
I tried everything I could find i.e Airplane mode, DNS Changer, VPN and most notably changing APN's. As for when I changed APN's I am with mobilicity so I just changed the APN to wap.davewireless.com as instructed on their site but didn't work. I thought it was because "Synergy's CM13" might be "sketchy" so I also flashed CM11 made for my model off cyanogen's official site as well as Resurrection Remix still didn't fix the problem. Is there anything I can do to access my mobile data.
BTW: I can receive calls, texts, voicemails literally everything but my data. I can also receive texts from mobilicty about billing if that means anything.
Plz Help and Thanks
The phone is running the latest bootloader and modem? Data works on a stock ROM?
audit13 said:
The phone is running the latest bootloader and modem? Data works on a stock ROM?
Click to expand...
Click to collapse
thanks but its fine lol I fixed it self but yea the data works on stock

Categories

Resources