Hello All,
I would like to use Iodine v4.0 on my android phone which is rooted with Cyanogen Mod 4.x, i tried statically compiling with arm-none-eabi-gcc but libz.a does not seem to come integrated into the ndk toolchain. iodine v5 is already available for android but due to version compatibility requirement for daemon and server i think i would definitely need to cross compile v4.0. could anyone cross compile it for android 1.6 ?
Link to Iodine v4 source: code.kryo.se/iodine/iodine-0.4.2.tar.gz
Thanks
`Archantos`
I just searched ebay for RK3066 Development Board, and found one there, I have played the Beagle board.
this one seem good for play with RK3066 firmware and debug rom.
wy6688 said:
I just searched ebay for RK3066 Development Board, and found one there, I have played the Beagle board.
this one seem good for play with RK3066 firmware and debug rom.
Click to expand...
Click to collapse
Not used that one, but I'd caution you away from the RK3066 in general, as I have used a device with RK3066 chipset...
Rockchip don't respect or follow the GPL and give sources with binaries included. This means you cannot compile entirely from source, and can be problematic. Some core drivers like the clock driver are blobbed.
There may be better development boards out there, the ODroid X2 is one I've heard good things about.
I have checked the Latest Linux Kernel source from Kernel.org, all their source code included, using new ARM DTS system (device tree source), so you can compile all your kernel directly from mainstream kernel, except some board level chip driver, which you need to customize from Driver fold, /linux/arch/arm/boot/dts/rk3066a.dtsi, rk3066a-clocks.dtsi
wy6688 said:
I have checked the Latest Linux Kernel source from Kernel.org, all their source code included, using new ARM DTS system (device tree source), so you can compile all your kernel directly from mainstream kernel, except some board level chip driver, which you need to customize from Driver fold, /linux/arch/arm/boot/dts/rk3066a.dtsi, rk3066a-clocks.dtsi
Click to expand...
Click to collapse
Have you got NAND drivers for the rk3066 nand? clock drivers, ddr drivers?
(see files with a .uu extension, it's a uuencoded .o binary)
https://github.com/AndrewDB/rk3066-kernel/tree/master/arch/arm/mach-rk30 (ddr.uu, ddr_freq.uu, clock_data.uu)
https://github.com/AndrewDB/rk3066-kernel/tree/master/drivers/video (fb.uu)
I believe there's also some missing drivers for the nand (https://github.com/AndrewDB/rk3066-kernel/tree/master/drivers/mtd/rknand)
I just got the development broad from ebay and checked the source code, it do missing these source file and although you can build the kernel without issue for 3.0.8.
I believe the latest 3.10.x kernel from kernel org, which included the RK3066 DTS files, can be used to build the generic kernel that can run on RK3066 board and should have no other source code needed.
I'm trying to build this kernel based on 3.10.x, anyone know detail steps that build the generic kernel based on RK3066 DTS?
Thank advance.
the resources of the omni are compatible with the x86 intel inside (i razr xt890)??
I call all developers, can you make this operating system for zenfone5?
https://techcrunch.com/2016/11/29/j...rtified-as-russias-first-android-alternative/
https://fossbytes.com/linux-sailfish-os-russia-official-mobile-os/
https://www.theguardian.com/technology/2015/may/18/russia-ios-android-sailfish-os
https://jolla.com/
https://sailfishos.org/
https://sailfishos.org/wiki/Application_SDK_Installation
https://sailfishos.org/wiki/Application_SDK#Latest_SDK_Release
https://forum.xda-developers.com/jolla-sailfish/general
It would be great!
-
https://github.com/sailfishos
"Sailfish works on x86, x86-64, ARM, and MIPS systems. The SDK is available for Linux, Windows, and OS X (http://releases.sailfishos.org/sdk/installers/). Alternately, developers can obtain the SDK's source code (http://releases.sailfishos.org/sdk/latest/)." --------- I found on this site: http://dcjtech.info/topic/sailfish-os/
As we know 32bit which base on Android 7.1 have some compatibility problems. So We decided to suspend the support for 7.1-32. Form next version 32bit will be based on Android 5.1, 64bit on Android 7.1.We will sync the new function to version 5.1.
Apologize for the inconvenience.
update details
- Game helper updated to v3.5.
- Optimize delay of left joystick.
- Enhancement of some controller's xbox360 mode.
- Fix the bug that handle's RT\LT key didn't work.
- The controller now can adjust dead zone.
- Some user interface adjustment.
Download
EXE
official for 32bit
http://files.phoenixos.com/os/PhoenixOSInstaller_v2.2.1.248_x86.exe
official for 64bit
http://files.phoenixos.com/os/PhoenixOSInstaller_v2.2.1.247_x86_x64.exe
Mega for 32bit
https://mega.nz/#!dfI3FDaa!qB9txxANyZunU42gi9XBNjqBZVrC2R3MXrE08r_fWBg
Mega for 64bit
https://mega.nz/#!ZfBhXZSR!DMTxrUl4bjMWvyXQTwz3zPXOsy_FsSD6tpax8Gz6F0E
ISO
official for 32bit
http://files.phoenixos.com/os/PhoenixOSInstaller_v2.2.1.248_x86.iso
official for 64bit
http://files.phoenixos.com/os/PhoenixOSInstaller_v2.2.1.247_x86_x64.iso
Mega for 32bit
https://mega.nz/#!hCwj1RpR!oonPbtojrslKwDKI7K7Q3dEiKGINnB0_duGOC6cS878
Mega for 64bit
https://mega.nz/#!lKZVDAZL!9O28uGq_pdK6uflOfetGpRLO-N0bHzODiy6mgHSJn6U
Link
http://bbs.phoenixstudio.org/en/showthread.php?tid=7215
Clover Trail powered tablest now supported?