Database Users

[Q] Acer iconia a500 power but no display

i have this acer iconia i recently update facebook via playstore,its getting bootloop then suddenly when i press the power button on the power led indicator will lights but no display could someone can help me?:crying:

katz1328 said:
i have this acer iconia i recently update facebook via playstore,its getting bootloop then suddenly when i press the power button on the power led indicator will lights but no display could someone can help me?:crying:
Click to expand...
Click to collapse
Sounds like you are stuck in APX mode. A little reading will straighten things out.

badly needed help
could someone give some links to fix this problem i dont have my cpu id and sbk, EUU stop working in my laptop, apx tools are not working could someone help me im badly needed some help w/ this matter tnx for thos who help me

I have the exact same issue.
Power button turns white - screen is black - no vibration from power button - seems dead.
The tablet was untouched and stock - I have never rooted anything or messed with any ROMs.
It had updated to ICS a while back and was working great until yesterday when it just wouldn't turn on besides the power button.
I have tried holding down the volume up and power button reset. I have tried the reset button. I have tried unhooking the battery.
After checking this forum I have installed the ACER drivers and plugged the tablet into my PC. It is showing up as APX.
I believe I am stuck in APX mode so from what I'm reading there is hope I can somehow salvage the tablet even though I didn't try flashing
anything and haven't screwed with it before.
Since I have never messed with flashing android stuff I really have no idea where to start as the guides seem to be for people who have experience. Where do I start? From what I'm reading I'll need a CPUID but how do I get that from a "dead" machine.
I am a quick learner if someone has the time to point in the right direction. Maybe I'll get hooked on flashing ROMs and can contribute something here.
Thanks for any help you can give.

If yr tab is stuck in apx mode, you're gonna need yr cpuid to recover it, there is no other way....see cpuid guide in my SIG and checkout srbeens method using Linux to retrieve it or usbdeview....
If getting stuck happened spontaneously it points to the faulty chip issue requiring replacement from Acer... check post #3 of the root guide in my SIG for ways to recover from apex mode, you might get lucky but be aware that if its happened once it will happen again...
EDIT see this post http://forum.xda-developers.com/showthread.php?p=37421071 regarding new motherboards on eBay
Sent from my GT-I9300 using Tapatalk 2

dibb_nz said:
If yr tab is stuck in apx mode, you're gonna need yr cpuid to recover it, there is no other way....see cpuid guide in my SIG and checkout srbeens method using Linux to retrieve it or usbdeview....
If getting stuck happened spontaneously it points to the faulty chip issue requiring replacement from Acer... check post #3 of the root guide in my SIG for ways to recover from apex mode, you might get lucky but be aware that if its happened once it will happen again...
EDIT see this post http://forum.xda-developers.com/showthread.php?p=37421071 regarding new motherboards on eBay
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Thank you for the info. I was able to get my cpuid and sbk last night following the guide that used Ubuntu live cd. It was fun to play with Linux again.
I want to try and recover and if it continues to be a problem I will replace the board.
Looking at post 3 from your guide it appears my next step will be to use nvflash.
I am a little lost on what I will be flashing since I don't have anything backed up (flash a recovery?) and don't have a custom ROM to flash.
I just a need a push in the right direction.
Thanks for the help.

sixstring774 said:
Thank you for the info. I was able to get my cpuid and sbk last night following the guide that used Ubuntu live cd. It was fun to play with Linux again.
I want to try and recover and if it continues to be a problem I will replace the board.
Looking at post 3 from your guide it appears my next step will be to use nvflash.
I am a little lost on what I will be flashing since I don't have anything backed up (flash a recovery?) and don't have a custom ROM to flash.
I just a need a push in the right direction.
Thanks for the help.
Click to expand...
Click to collapse
Well done getting yr cpuid!!
If you want stock, your best bet is an Acer EUU. There's one in the guide which will take u back to HC 3.0.1. Blackthund3r has one in his acer OTA update thread too I think in dev forum....
Next step is getting out of apx mode...use lcd047's method in the cpuid guide....just use the image folder from your EUU ...and no need to do the boot loader part....Also use Linux again to run nvflash commands, no driver issues with that, unlike windows....
See how u go with that for a start. You should be able to OTA all the way to ICS with that EUU, if u want.
Sent from my GT-I9300 using Tapatalk 2

dibb_nz said:
Well done getting yr cpuid!!
If you want stock, your best bet is an Acer EUU. There's one in the guide which will take u back to HC 3.0.1. Blackthund3r has one in his acer OTA update thread too I think in dev forum....
Next step is getting out of apx mode...use lcd047's method in the cpuid guide....just use the image folder from your EUU ...and no need to do the boot loader part....Also use Linux again to run nvflash commands, no driver issues with that, unlike windows....
See how u go with that for a start. You should be able to OTA all the way to ICS with that EUU, if u want.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Well we are getting somewhere but I hit a snag.
After running nvflash command the tablet instantly vibrated and I now have the ACER logo on the screen and the words Entering Acer Download Mode in the corner. I'm not sure if the command ran correctly as there was an error at the end in regards to partitions
[email protected]:~/Desktop/nvflash/Image$ sudo ./nvflash --bct flash.bct --setbct --odmdata 0x100c0105 --configfile flash.cfg --create --bl bootloader.bin --sbk 0x6C886F00 0xA4A2F106 0x4BEB1504 0xD8292103 --go
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 4
chip sku: 0x8
chip uid: 0x037c70044220d657
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0x100c0105
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714385/714385 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
failed executing command 16 NvError 0x120002
command failure: create failed (bad data)
bootloader status: failed to create the partition (code: 10) message: nverror:0x5 (0x1000005) flags: 0
What to do next? Thanks for guiding me in the right direction.

sixstring774 said:
Well we are getting somewhere but I hit a snag.
After running nvflash command the tablet instantly vibrated and I now have the ACER logo on the screen and the words Entering Acer Download Mode in the corner. I'm not sure if the command ran correctly as there was an error at the end in regards to partitions
[email protected]:~/Desktop/nvflash/Image$ sudo ./nvflash --bct flash.bct --setbct --odmdata 0x100c0105 --configfile flash.cfg --create --bl bootloader.bin --sbk 0x6C886F00 0xA4A2F106 0x4BEB1504 0xD8292103 --go
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 4
chip sku: 0x8
chip uid: 0x037c70044220d657
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0x100c0105
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714385/714385 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
failed executing command 16 NvError 0x120002
command failure: create failed (bad data)
bootloader status: failed to create the partition (code: 10) message: nverror:0x5 (0x1000005) flags: 0
What to do next? Thanks for guiding me in the right direction.
Click to expand...
Click to collapse
OK bad data and partition error too...
Which EUU did u end up using?
tdv4 is known to reset partitions but in some instances fails. The babsector.rar file can be more successful... link in the root guide with some instructions how to use.
You're gonna need a ROM to flash and At this stage I'd suggest a custom ICS one...
babsector will/should also flash up the skrilax_cz v8 unlocked bootloader.
If u get still get a bad data error then yr tab is toast...BUT keep trying it 8, 10, 15 times you may get lucky
PS:
Oh check the euu image folder for the .bat file and see if the odm data values match with what u are using manually.
There are 2 values used in different euu's and no-one as ever explained why this is....the one u used and this one 0x300d8011
To leave download/apx mode the windows command is nvflash -r --go
See vaches post bottom of post 3 in root guide, for more nvflash commands. You might just get lucky
good luck!!
dibb
Sent from my GT-I9300 using Tapatalk 2

dibb_nz said:
OK bad data and partition error too...
Which EUU did u end up using?
tdv4 is known to reset partitions but in some instances fails. The babsector.rar file can be more successful... link in the root guide with some instructions how to use.
You're gonna need a ROM to flash and At this stage I'd suggest a custom ICS one...
babsector will/should also flash up the skrilax_cz v8 unlocked bootloader.
If u get still get a bad data error then yr tab is toast...BUT keep trying it 8, 10, 15 times you may get lucky
PS:
Oh check the euu image folder for the .bat file and see if the odm data values match with what u are using manually.
There are 2 values used in different euu's and no-one as ever explained why this is....the one u used and this one 0x300d8011
To leave download/apx mode the windows command is nvflash -r --go
See vaches post bottom of post 3 in root guide, for more nvflash commands. You might just get lucky
good luck!!
dibb
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I used this EUU
Official Acer EUU 3.0.1
WHOA!! Something happened overnight. When I went to bed last night I was stuck in APX.
I was going to try a new EUU or babsector like you suggested. As I was getting ready to do that I powered on the tablet. It vibrated and the ACER logo came up on the screen. First time it has done that since I started trying to fix it. It does not say it is download mode like it did before.
Looking at the guide there is a section that says
Use this update.zip for any of the following:
- You do not have your cpuid
- You are stuck on the "Acer" Logo
- Your tab boots past the Acer Logo but then boot loops at the boot animation
- You are on the old HC bootloader /ICS Rom combination
- You wish to return to factory stock, and OTA all the way to Stock ICS
Should I be trying that now?
---------- Post added at 06:25 PM ---------- Previous post was at 05:48 PM ----------
sixstring774 said:
I used this EUU
Official Acer EUU 3.0.1
WHOA!! Something happened overnight. When I went to bed last night I was stuck in APX.
I was going to try a new EUU or babsector like you suggested. As I was getting ready to do that I powered on the tablet. It vibrated and the ACER logo came up on the screen. First time it has done that since I started trying to fix it. It does not say it is download mode like it did before.
Looking at the guide there is a section that says
Use this update.zip for any of the following:
- You do not have your cpuid
- You are stuck on the "Acer" Logo
- Your tab boots past the Acer Logo but then boot loops at the boot animation
- You are on the old HC bootloader /ICS Rom combination
- You wish to return to factory stock, and OTA all the way to Stock ICS
Should I be trying that now?
Click to expand...
Click to collapse
I ended up trying the tdv4 EUU. I put the tablet back into APX mode.
This was the result.
[email protected]:~/Desktop/root-3.2.1/Image$ sudo ./nvflash --bt --odmdata 0x100c0105 --configfile flash.cfg --create --bl bootloader.bin --sbk 0x6C886F00 0xA4A2F106 0x4BEB1504 0xD8292103 --go
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 4
chip sku: 0x8
chip uid: 0x037c70044220d657
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0x100c0105
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714385/714385 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: APP
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
Formatting partition 2 BCT please wait.. FAILED!
command failure: create failed (bad data)
bootloader status: partition table is required for this command (code: 8) message: nverror:0x4 (0x4) flags: 0
I just tried babsector on my PC. It also had an error
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 4
chip sku: 0x8
chip uid: 0x037c70044220d657
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
failed executing command 12 NvError 0x120002
command failure: create failed (bad data)
bootloader status: fatal failure to read / write to mass storage (code: 9) messa
ge: nverror:0x8 (0x19000008) flags: 0
Press any key to continue . . .
Ideas?

Its not looking good m8
Someone else posted ebay have new m/b's listed for $50, you may want to look into that??
Couple of things to note though:
maybe just a copy/paste error but
you wrote: [email protected]:~/Desktop/root-3.2.1/Image$ sudo ./nvflash --bt --odmdata 0x100c0105
should be nvflash --bct flash.bct --setbct --configfile flash.cfg --create --odmdata 0xb00d8011 --bl bootloader.bin --go
the BCT error - if you d/l apxflash tool and run it....you MUST dump, save then use your tabs BCT when u get to the "bct window" - carry on with the tool and then put your tab in apx mode manually - just before the flash you'll see a window with a couple of check boxes "show nvflash commands'" check that to show any flash errors....flash it and see what happens
failure to write to mass storage - just another symptom of the "bad sector fault"
you might try a factory hard reset via rotation switch - this should wipe all userdata and cache and has been known to fix a few problems
With all the tools and some persistence (otherwise known as banging one's head against a brick wall. lol) something may end up working....thats all I can offer you at the moment...others who have been in this same situation will post something like you did...whoa all of a sudden it worked!!!! Be aware though it will happen again sometime in the future unfortunately...as I said before, your best bet is gonna be ebay

Well I tried for a few more hours to get something flashed and finally gave up and ordered a new board. Since this thing bricked itself without me ever screwing around with the file system I've got to believe it's a hardware issue. Hopefully the new board will last longer than 14 months like this one. Thanks for the tips on trying to revive it. After installing the new board I might get into some of this custom ROM stuff. What do you suggest for a ROM?

a500 USB DRIVER VANISHES
I need a little help my device is stuck in apx mode (blank screen with power led on) i have uid (cpuid) and sbk i have read a lot fom this forum and have all the tool to root, flash, load.. But my main problem is that when i reset my acer a500 and the usb is attached the windows 7 recognizes the driver and (sound pops up) and the driver (acer picasso usb boot recovery driver) is there but no tool e.g apxtool or fastflash or ics rooting nothing works or regocznies the device coz when i press any option or press the key to continue the drive drops and vanishes from the window usb list in device manager and i have to manually reset acer again to get the driver back but still no use as command prompt tells me that no device is attached or found. Please help as this acer is my wifes gift to me and im trying hard to get it back its totally dead

Another A500 stuck in APX

Hey guys for the past 5 months I`ve been trying to unstuck my A500 from teh APX mode, and still no luck.
I have my CPUID/SDK, I`ve used every methodthat I know to unstuck it but I never managed it.
Can anyone share me a light? And in the case of sending it for Acer, can anyone say if is an firmware or hardware problem?
*Notes:
It all happened after I tried to intall a custom ics rom (based on stock ics rom) because that acer was delaying the launch on my country.
On the nvflash program , I get the following error
Flashing bootloader: bootloader_v8.bin ...
Nvflash started
[resume mode]
Formatting partition 4 please wait.. Command Execution failed cmd 13, error 0x12
0002
FAILED!
command failure: format partition failed (bad command)
bootloader status: unknown operation (code: 1) message: flags: 0
Nvflash started
[resume mode]
On the A500APXFlash program freezes on Step 2 uploading image.
thx in advance

caio492 said:
Hey guys for the past 5 months I`ve been trying to unstuck my A500 from teh APX mode, and still no luck.
I have my CPUID/SDK, I`ve used every methodthat I know to unstuck it but I never managed it.
Can anyone share me a light? And in the case of sending it for Acer, can anyone say if is an firmware or hardware problem?
*Notes:
It all happened after I tried to intall a custom ics rom (based on stock ics rom) because that acer was delaying the launch on my country.
On the nvflash program , I get the following error
Flashing bootloader: bootloader_v8.bin ...
Nvflash started
[resume mode]
Formatting partition 4 please wait.. Command Execution failed cmd 13, error 0x12
0002
FAILED!
command failure: format partition failed (bad command)
bootloader status: unknown operation (code: 1) message: flags: 0
Nvflash started
[resume mode]
On the A500APXFlash program freezes on Step 2 uploading image.
thx in advance
Click to expand...
Click to collapse
Do a search for "babsector", you will find exact references to the same error messages you are getting. It seems your partition table got corrupted, and now you can't write to it because it is corrupted, so babsector (misspelled badsector?) rewrites the partition table in a different location, and a different size, then re-creates it back in the correct location, thus fixing your problem. (Or something along those lines, but it will def fix your problem)
Don't forget to click "Thanks" if this fixes you up. (Tip, maybe, a lot of noobs at flashing, forget to root their tablet before flashing, thinking the flash will give them root. This is the cause for many of these first time flashers ending up in APX.)
badsector or babsector, can be found at:
http://narod.ru/disk/53919831001.a235ea2225f319015f30c009629d2075/BabSector.rar.html

Danny2 said:
Do a search for "babsector", you will find exact references to the same error messages you are getting. It seems your partition table got corrupted, and now you can't write to it because it is corrupted, so babsector (misspelled badsector?) rewrites the partition table in a different location, and a different size, then re-creates it back in the correct location, thus fixing your problem. (Or something along those lines, but it will def fix your problem)
Don't forget to click "Thanks" if this fixes you up. (Tip, maybe, a lot of noobs at flashing, forget to root their tablet before flashing, thinking the flash will give them root. This is the cause for many of these first time flashers ending up in APX.)
badsector or babsector, can be found at:
http://narod.ru/disk/53919831001.a235ea2225f319015f30c009629d2075/BabSector.rar.html
Click to expand...
Click to collapse
Thx for the response, I ran both .bat files on the folder, still I get error messages (listed below).
I`ve tried to run the nvflash.exe, but it opens and closes instantly.
Sorry if I done something wrong, I dont have much exp. on these subjects and the folder didnt present instructions how to proceed.
Error messages:
A501 A.bat:
Tablet enters in Acer download mode (Acer logo on the middle)
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x03806248436154d7
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
failed executing command 16 NvError 0x120002
command failure: create failed (bad data)
bootloader status: failed to create the partition (code: 10) message: nverror:0x
5 (0x1000005) flags: 0
A501 B.bat:
Tablet enters in Acer download mode (Acer logo on the middle)
Same message as above.

caio492 said:
Thx for the response, I ran both .bat files on the folder, still I get error messages (listed below).
I`ve tried to run the nvflash.exe, but it opens and closes instantly.
Sorry if I done something wrong, I dont have much exp. on these subjects and the folder didnt present instructions how to proceed.
Error messages:
A501 A.bat:
Tablet enters in Acer download mode (Acer logo on the middle)
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x03806248436154d7
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
failed executing command 16 NvError 0x120002
command failure: create failed (bad data)
bootloader status: failed to create the partition (code: 10) message: nverror:0x
5 (0x1000005) flags: 0
A501 B.bat:
Tablet enters in Acer download mode (Acer logo on the middle)
Same message as above.
Click to expand...
Click to collapse
Sorry, I am by no means an expert, but babsector has always fixed the problem for me when the error was " Command Execution failed cmd 13, error 0x12 0002"
I have not seen anyone that had the error "failed executing command 16 NvError 0x120002" come away without having to change out the Motherboard. Can't hurt to try again, sometimes it takes a couple tries to make it go. If it doesn't go, maybe you might need a new motherboard.

Danny2 said:
Sorry, I am by no means an expert, but babsector has always fixed the problem for me when the error was " Command Execution failed cmd 13, error 0x12 0002"
I have not seen anyone that had the error "failed executing command 16 NvError 0x120002" come away without having to change out the Motherboard. Can't hurt to try again, sometimes it takes a couple tries to make it go. If it doesn't go, maybe you might need a new motherboard.
Click to expand...
Click to collapse
Then its a dead tablet because the technical assistance on my country doesn`t have motherboards, bad luck then

[Q] Going Nuts!!!

Okay so this thing is driving me nuts! I have the A500 and it is stuck in APX mode. A buddy gave me this saying it was bricked. I would love to get it up and going! I have been from forum to forum and going nuts here. I really though I was going to be able to get it with the timmydean tool. But when I enter my cpuID its one number too long. CPU ID: 0x37C6205446015D7. I got this number from doing some trick on ubutnu. I have my SKB as well. Can anyone help me out. I don't know much at all about tablets and flashing roms on them. I used to have a Windows Mobile phone back in the day and did a great deal of making kitchens for it but this seems like a lot more steps. Is there a trick with the cupid on timmydeans tool? Thank you in advance!

beamerguy0 said:
Okay so this thing is driving me nuts! I have the A500 and it is stuck in APX mode. A buddy gave me this saying it was bricked. I would love to get it up and going! I have been from forum to forum and going nuts here. I really though I was going to be able to get it with the timmydean tool. But when I enter my cpuID its one number too long. CPU ID: 0x37C6205446015D7. I got this number from doing some trick on ubutnu. I have my SKB as well. Can anyone help me out. I don't know much at all about tablets and flashing roms on them. I used to have a Windows Mobile phone back in the day and did a great deal of making kitchens for it but this seems like a lot more steps. Is there a trick with the cupid on timmydeans tool? Thank you in advance!
Click to expand...
Click to collapse
You dont need the 0x just use 37C6205446015D7
what do u mean is there a trick on timmydeans tool - thats HC 3.2??

dibb_nz said:
You dont need the 0x just use 37C6205446015D7
what do u mean is there a trick on timmydeans tool - thats HC 3.2??
Click to expand...
Click to collapse
okay, took the 0x out and it took it... However now it start to run but after about 10 to 20 seconds it fails and tells me to try again. The tablet is showing up on my computer as being in apx mode when I connect it.

beamerguy0 said:
okay, took the 0x out and it took it... However now it start to run but after about 10 to 20 seconds it fails and tells me to try again. The tablet is showing up on my computer as being in apx mode when I connect it.
Click to expand...
Click to collapse
ok lets back up the bus a bit!!!
What tool are u using?
Do you know if the tab was on HC or ICS?

dibb_nz said:
ok lets back up the bus a bit!!!
What tool are u using?
Do you know if the tab was on HC or ICS?
Click to expand...
Click to collapse
alright I believe what happened is my friend had ICS, but while updating something happened and that's when he said it was bricked. So when I was reading some of the many millions of forums I saw some talked about using Timmy deans tool to go back to stock HC and start over. So that's what I was trying to do.

beamerguy0 said:
alright I believe what happened is my friend had ICS, but while updating something happened and that's when he said it was bricked. So when I was reading some of the many millions of forums I saw some talked about using Timmy deans tool to go back to stock HC and start over. So that's what I was trying to do.
Click to expand...
Click to collapse
okidoki! got it
For timmys tool to work you need USB debuggign enabled on your tab, so if you cannot boot to ensure that this is enabled, you need to try another tool!!!
the babsector.rar works when tdv4 won't...it will reset the partitions on your tab, flash the unlocked bootloader and cwm. If there is an error please post the output....You will also need to flash an ICS or JB rom
dibb_nz said:
babsector.rar download here
How to use babsector -
Turn your tab off and put it in apx mode manually. Press and hold reset button, hold power for 3 secs after the light comes on and release it, after another second release the reset button. Your screen is black and the power light is on.
On your PC:
Download and extract the .rar to a folder on your PC
Connect your tab to your PC
Navigate to the babsector folder and click on 501 A.bat
On your tab:
Reboot into recovery power/volume DOWN - (closest end to the power button)
Go to Mounts and Storage Menu and
Format - System, Data, Flexrom, Cache
Then flash your ICS/JB rom, power off.
Go back into apx mode and run 501 B.bat
Reboot into recovery and do the wipes
Reboot!!!
Click to expand...
Click to collapse

dibb_nz said:
okidoki! got it
For timmys tool to work you need USB debuggign enabled on your tab, so if you cannot boot to ensure that this is enabled, you need to try another tool!!!
the babsector.rar works when tdv4 won't...it will reset the partitions on your tab, flash the unlocked bootloader and cwm. If there is an error please post the output....You will also need to flash an ICS or JB rom
Click to expand...
Click to collapse
okay, thanks so much, I will try this tomorrow morning and post the results. Is there a full working jelly bean rom for the a500 now? I know I saw some things were not working like WiFi or cameras... Those were older post though. Can you point me to where I can get a good ICs or jelly bean rom?

beamerguy0 said:
okay, thanks so much, I will try this tomorrow morning and post the results. Is there a full working jelly bean rom for the a500 now? I know I saw some things were not working like WiFi or cameras... Those were older post though. Can you point me to where I can get a good ICs or jelly bean rom?
Click to expand...
Click to collapse
It failed Here is what it said when I ran the a501 A.bat
****************************************************************
* Before executing, be sure to delete recovery-from-boot.p *
* from /system to ensure recovery will stick *
****************************************************************
****************************************
* Reboot your tablet into APX mode *
****************************************
Generate your SBK with your CPUID from here :
Enter your SBK:0x1dd41e00 0xb8961700 0x57dff302 0x88792103
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x037c6205446015d7
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
failed executing command 12 NvError 0x120002
command failure: create failed (bad data)
bootloader status: fatal failure to read / write to mass storage (code: 9) messa
ge: nverror:0x8 (0x19000008) flags: 0
Press any key to continue . . .

beamerguy0 said:
It failed Here is what it said when I ran the a501 A.bat
****************************************************************
* Before executing, be sure to delete recovery-from-boot.p *
* from /system to ensure recovery will stick *
****************************************************************
****************************************
* Reboot your tablet into APX mode *
****************************************
Generate your SBK with your CPUID from here :
Enter your SBK:0x1dd41e00 0xb8961700 0x57dff302 0x88792103
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x037c6205446015d7
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
failed executing command 12 NvError 0x120002
command failure: create failed (bad data)
bootloader status: fatal failure to read / write to mass storage (code: 9) messa
ge: nverror:0x8 (0x19000008) flags: 0
Press any key to continue . . .
Click to expand...
Click to collapse
oh dear, not good news I'm afraid...this is the error for the fault memory chip and unfortuanately there is no fix for that....sorry dude

dibb_nz said:
oh dear, not good news I'm afraid...this is the error for the fault memory chip and unfortuanately there is no fix for that....sorry dude
Click to expand...
Click to collapse
NOOOOooooooooo lol Well, glad I asked before continuing to go crazy with it... I have seen motherboards that are pretty cheap for it... LIke 50-60.00. If I change it out would that work? Well assuming that the board I buy is good and everything. I would like a tablet with GPS but really don't want to spend a couple hundred bucks on a new one at that time. Thank you for all the help you gave me

Another bricked a500...

Apologies for yet another thread. I've been through every "unbrick" thread and still not able to boot the tab. I'm starting to think it's time to recycle the thing.
So, I picked up my tab one day and it had powered off (bone stock on the latest OTA). Tried to boot up and never got past the Acer splash screen (multiple attempts). Tried to reflash via the sd card, and it failed. Now it only boots to the dead Android. Try to flash another rom (these are stock releases) and it hangs for over a day without completing. Now it won't get past apx mos, black screen with a power light. Tried to flash via nvflash using several automated methods, they all fail complaining of various errors that seem to be related to bad partitions. I run badblocks and get errors. Now, having gone through everything short, I go to euu. That also hangs on copying the image. I'm out of ideas. is there something I haven't tried, or am I likely dealing with s dead tab at this point?

Pretty much the same thing happened to me last night I stayed up all morning trying to fix it but I'm beginning to realize it's probably something in the hardware.. Odd there so many all about the same kind of time.. Mine was rooted and the only thing I can boot to is the first skrillax boot loader screen, or Acer screen..depending on what I did..guess its Tims for a new tab..any suggestions? Lol
Sent from my A100 using Tapatalk

droidxxxxx said:
Pretty much the same thing happened to me last night I stayed up all morning trying to fix it but I'm beginning to realize it's probably something in the hardware.. Odd there so many all about the same kind of time.. Mine was rooted and the only thing I can boot to is the first skrillax boot loader screen, or Acer screen..depending on what I did..guess its Tims for a new tab..any suggestions? Lol
Sent from my A100 using Tapatalk
Click to expand...
Click to collapse
I guess we can take the guts out and make them into picture frames?

I did the fix my Acer thing from the Acer website found out mine is out of warranty for sure but they got back to me with an email and a phone number and I called and talked to a girl who told me it would be 200 and $49 just to get it in the door for a repair. Needless to say I *****ed and moaned told her I was going to throw it in the garbage and she is now sending me a label for FedEx to ship it and they will look at it hopefully they will fix it possibly for free now lol so I'm going to be sending it off when I get the label. I've tried just about everything and it seems mine just isn't recognized very well by the PC. I wonder if I have the correct drivers
Sent from my SCH-I535 using Tapatalk

wsmithjr said:
Apologies for yet another thread. I've been through every "unbrick" thread and still not able to boot the tab. I'm starting to think it's time to recycle the thing.
So, I picked up my tab one day and it had powered off (bone stock on the latest OTA). Tried to boot up and never got past the Acer splash screen (multiple attempts). Tried to reflash via the sd card, and it failed. Now it only boots to the dead Android. Try to flash another rom (these are stock releases) and it hangs for over a day without completing. Now it won't get past apx mos, black screen with a power light. Tried to flash via nvflash using several automated methods, they all fail complaining of various errors that seem to be related to bad partitions. I run badblocks and get errors. Now, having gone through everything short, I go to euu. That also hangs on copying the image. I'm out of ideas. is there something I haven't tried, or am I likely dealing with s dead tab at this point?
Click to expand...
Click to collapse
This is what I'd do, and this goes for anyone stuck on the acer logo or otherwise soft-bricked.
Run babsector.rar file.
This is the ONLY file that will give you an error that can be troubleshooted. NONE of the auto tools or the manual nvflash method will do this.
Once babsector has run, post the output and we can tell if its the dreaded hardware fault or not.
Download and instructions here http://forum.xda-developers.com/showthread.php?t=2049778
A great guide by kaijikun here http://forum.xda-developers.com/showthread.php?t=2450119
If you get stuck with the black screen with the power led light ON.
Hold the power button for 5 secs until it goes off.
Re-enter apx mode manually (i.e. this means using the buttons, don't use the auto tools, it won't work)
It also goes without saying, you need the acer drivers http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=3851 and the drivers from the android sdk, you can download a mini zip here https://www.dropbox.com/s/x98233x397wrzr1/Step_1_Drivers_mini_sdk_adb.zip
If you don't have your CPUID, there's no way of unbricking.
If you don't know what a CPUID is AND can still boot, read this guide here http://forum.xda-developers.com/showthread.php?p=25429111#post25429111.
If you cannot boot and don't have your CPUID you need to recover it using Linux, see srbeens guide here http://forum.xda-developers.com/showthread.php?t=1751978
Just to say, the whole unbricking process takes some time....mostly downloading everything you need. You will also need a fully charged tab, you can sometimes use 40-50% of your battery doing this. To be safe connect your charger and leave it there till you are done.
The other thing is your PC OS...there has been mixed success with win8 and 64bit. FOr best results win7, vista and xp work best. If you are linux savvy, you're in luck, no driver issues at all with this OS!!!
The only way you can not restore your tab to fully working order is if your tab has the faulty memory chip. And the only way to know if this is the case is to run the babsector.rar file.
dibb

wsmithjr said:
Apologies for yet another thread. I've been through every "unbrick" thread and still not able to boot the tab. I'm starting to think it's time to recycle the thing.
So, I picked up my tab one day and it had powered off (bone stock on the latest OTA). Tried to boot up and never got past the Acer splash screen (multiple attempts). Tried to reflash via the sd card, and it failed. Now it only boots to the dead Android. Try to flash another rom (these are stock releases) and it hangs for over a day without completing. Now it won't get past apx mos, black screen with a power light. Tried to flash via nvflash using several automated methods, they all fail complaining of various errors that seem to be related to bad partitions. I run badblocks and get errors. Now, having gone through everything short, I go to euu. That also hangs on copying the image. I'm out of ideas. is there something I haven't tried, or am I likely dealing with s dead tab at this point?
Click to expand...
Click to collapse
Yeah same thing happened to my A500. But downloaded 4 files Because there was 4 to choose from.
I renamed the file, eg filename.zip, to "update" with no extension. Copied to a clean micro SD. Inserted the SD card. Held the volume down and power switch until tablet vibrated and toggled the screen lock switch on then off. Then sat and watched. The whole process can take 30 minutes and for a long time it seemed stuck at about 25%. I decided to wait and see. And it all came good.
My A500 was stock no root. Still is and seems to work better now.
:good:

Here's the output from a501 a.bat, as requested.
Nvflash started
rcm version 0X20001
System Information:
* *chip name: t20
* *chip id: 0x20 major: 1 minor: 3
* *chip sku: 0x8
* *chip uid: 0x037c61c742a14597
* *macrovision: disabled
* *hdcp: enabled
* *sbk burned: true
* *dk burned: true
* *boot device: emmc
* *operating mode: 4
* *device config strap: 0
* *device config fuse: 0
* *sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
failed executing command 12 NvError 0x120002
command failure: create failed (bad data)
bootloader status: fatal failure to read / write to mass storage (code: 9) messa
ge: nverror:0x8 (0x19000008) flags: 0
Press any key to continue . . .
Thanks in advance. ..
dibb_nz said:
This is what I'd do, and this goes for anyone stuck on the acer logo or otherwise soft-bricked.
Run babsector.rar file.
This is the ONLY file that will give you an error that can be troubleshooted. NONE of the auto tools or the manual nvflash method will do this.
Once babsector has run, post the output and we can tell if its the dreaded hardware fault or not.
Download and instructions here http://forum.xda-developers.com/showthread.php?t=2049778
A great guide by kaijikun here http://forum.xda-developers.com/showthread.php?t=2450119
If you get stuck with the black screen with the power led light ON.
Hold the power button for 5 secs until it goes off.
Re-enter apx mode manually (i.e. this means using the buttons, don't use the auto tools, it won't work)
It also goes without saying, you need the acer drivers http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=3851 and the drivers from the android sdk, you can download a mini zip here https://www.dropbox.com/s/x98233x397wrzr1/Step_1_Drivers_mini_sdk_adb.zip
If you don't have your CPUID, there's no way of unbricking.
If you don't know what a CPUID is AND can still boot, read this guide here http://forum.xda-developers.com/showthread.php?p=25429111#post25429111.
If you cannot boot and don't have your CPUID you need to recover it using Linux, see srbeens guide here http://forum.xda-developers.com/showthread.php?t=1751978
Just to say, the whole unbricking process takes some time....mostly downloading everything you need. You will also need a fully charged tab, you can sometimes use 40-50% of your battery doing this. To be safe connect your charger and leave it there till you are done.
The other thing is your PC OS...there has been mixed success with win8 and 64bit. FOr best results win7, vista and xp work best. If you are linux savvy, you're in luck, no driver issues at all with this OS!!!
The only way you can not restore your tab to fully working order is if your tab has the faulty memory chip. And the only way to know if this is the case is to run the babsector.rar file.
dibb
Click to expand...
Click to collapse

wsmithjr said:
Here's the output from a501 a.bat, as requested.
Nvflash started
rcm version 0X20001
System Information:
* *chip name: t20
* *chip id: 0x20 major: 1 minor: 3
* *chip sku: 0x8
* *chip uid: 0x037c61c742a14597
* *macrovision: disabled
* *hdcp: enabled
* *sbk burned: true
* *dk burned: true
* *boot device: emmc
* *operating mode: 4
* *device config strap: 0
* *device config fuse: 0
* *sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
failed executing command 12 NvError 0x120002
command failure: create failed (bad data)
bootloader status: fatal failure to read / write to mass storage (code: 9) messa
ge: nverror:0x8 (0x19000008) flags: 0
Press any key to continue . . .
Thanks in advance. ..
Click to expand...
Click to collapse
Its a hardware fault, bad memory chip
Sent from my GT-I9300 using Tapatalk

Thank you for the confirmation.
dibb_nz said:
Its a hardware fault, bad memory chip
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse

Same thing happened to mine
Exact same thing happened to mine. No recourse since mine was out of warranty but I complained about it on an Acer Forum and on their facebook page and within a couple of hours I was contacted and instructed to mail it in. I had to pay for the shipping charges there (like 12 bucks) but they shipped it back on their dime and it was fixed. From shipping to them to getting it back was about 2 weeks. I was ready to swear off Acer forever but they manned up and fixed something that was obviously a widely known defect since it's happening to many others.

Dear dibb_nz,
What if A500 A.bat is working flawlessly for me, but A500 B.bat is failing during BCT formatting stage:
Code:
Formatting partition 2 BCT please wait.. FAILED!
command failure: create failed (bad data)
bootloader status: partition table is required for this command (code: 0) message: nverror:0x2 (0x2) flags:0
Should you need any additional info, just ask me
Thank you in advance for reply!

Hardware failure?
a501A failed. Here is the script.. Is my a500 suffering from the same bad memory chip problem?
Nvflash started
rcm version 0x20001
System Information:
- chip name: t20
- chip id: 0x20 major: 1 minor: 3
- chip sku: 0x8
- chip uid: 0x037c6185435f2617
- macrovision: disabled
- hdcp: enabled
- sbk burned: true
- dk burned: true
- boot device: emmc
- operating mode: 4
- device config strap: 0
- device config fuse: 0
- sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
: 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
failed executing command 16 NvError 0x120002
command failure: create failed (bad data)
bootloader status: failed to create the partition (code: 10) message: nverror:0x42008 (0x2042008) flags:0
Thanks in Advance.

SyavsoN said:
Dear dibb_nz,
What if A500 A.bat is working flawlessly for me, but A500 B.bat is failing during BCT formatting stage:
Code:
Formatting partition 2 BCT please wait.. FAILED!
command failure: create failed (bad data)
bootloader status: partition table is required for this command (code: 0) message: nverror:0x2 (0x2) flags:0
Should you need any additional info, just ask me
Thank you in advance for reply!
Click to expand...
Click to collapse
mhiester said:
a501A failed. Here is the script.. Is my a500 suffering from the same bad memory chip problem?
Nvflash started
rcm version 0x20001
System Information:
- chip name: t20
- chip id: 0x20 major: 1 minor: 3
- chip sku: 0x8
- chip uid: 0x037c6185435f2617
- macrovision: disabled
- hdcp: enabled
- sbk burned: true
- dk burned: true
- boot device: emmc
- operating mode: 4
- device config strap: 0
- device config fuse: 0
- sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
: 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
failed executing command 16 NvError 0x120002
command failure: create failed (bad data)
bootloader status: failed to create the partition (code: 10) message: nverror:0x42008 (0x2042008) flags:0
Thanks in Advance.
Click to expand...
Click to collapse
Sorry u both having probs an I not sure I can help but.....
 @SyavsoN so do u get an error with the first bat file? If not,
run the first one again
Enter recovery and do the wipes
Reboot recovery and flash yr rom
What happens???
@mheister and everyone else with bct error.
Apxflash tool is the only tool that can fix these errors.
Normally u can use the default bct when u get to that option. But if u have probs with the default then u must use the bct from yr tab. So choose the dump yr bct option.
Thats about all I can suggest for u guys atm,
If @blackthund3r is still lurking around here he may be able to help out with this!!
dibb

Socrates11 said:
Exact same thing happened to mine. No recourse since mine was out of warranty but I complained about it on an Acer Forum and on their facebook page and within a couple of hours I was contacted and instructed to mail it in. I had to pay for the shipping charges there (like 12 bucks) but they shipped it back on their dime and it was fixed. From shipping to them to getting it back was about 2 weeks. I was ready to swear off Acer forever but they manned up and fixed something that was obviously a widely known defect since it's happening to many others.
Click to expand...
Click to collapse
I just got the same issue. a501 A.bat gives me the same error: "bootloader status: fatal failure to read / write to mass storage (code: 9) message: nverror:0x8 (0x19000008) flags: 0"
Code:
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
failed executing command 12 NvError 0x120002
command failure: create failed (bad data)
bootloader status: fatal failure to read / write to mass storage (code: 9) messa
ge: nverror:0x8 (0x19000008) flags: 0
I just posted on the Acer Americas Facebook page, let's see what they say...

HyeProfile said:
I just got the same issue. a501 A.bat gives me the same error: "bootloader status: fatal failure to read / write to mass storage (code: 9) message: nverror:0x8 (0x19000008) flags: 0"
Code:
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
failed executing command 12 NvError 0x120002
command failure: create failed (bad data)
bootloader status: fatal failure to read / write to mass storage (code: 9) messa
ge: nverror:0x8 (0x19000008) flags: 0
I just posted on the Acer Americas Facebook page, let's see what they say...
Click to expand...
Click to collapse
Try Acer dude, 3 users have had there's repaired by acer for free, even if they were no longer under warranty!!! It's worth a shot
Sent from my HTC_PN071 using Tapatalk

Anyone know how to get in contact with Acer. I've looked around in their support website, but I can't chat with a support assistant because my tablet is out of warranty.
Sent from my DROID RAZR using Tapatalk

Check my fix out!
wsmithjr said:
Here's the output from a501 a.bat, as requested.
Nvflash started
rcm version 0X20001
System Information:
* *chip name: t20
* *chip id: 0x20 major: 1 minor: 3
* *chip sku: 0x8
* *chip uid: 0x037c61c742a14597
* *macrovision: disabled
* *hdcp: enabled
* *sbk burned: true
* *dk burned: true
* *boot device: emmc
* *operating mode: 4
* *device config strap: 0
* *device config fuse: 0
* *sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
failed executing command 12 NvError 0x120002
command failure: create failed (bad data)
bootloader status: fatal failure to read / write to mass storage (code: 9) messa
ge: nverror:0x8 (0x19000008) flags: 0
Press any key to continue . . .
Thanks in advance. ..
Click to expand...
Click to collapse
I had the same error check out my tut (http://forum.xda-developers.com/showthread.php?p=49585687)

[Q]PB Liberty Tab Recovery Help Needed Stuck

HI, I have been working on the PB Liberty Tab G100 for over a week.. I just want it back to stock.. no custom boot loaders or roms etc.. just so they can use it..
the story so far... I was asked to repair a PB liberty tab that was supposedly just freezing.. I think it had a custom boot V8..
Recovery was not working just getting the android dube with red triangle.. so installed thor recovery via fastboot..
tried the update method.. did not work.. tried everything.. but was having an issue with the wiping and formating...
I managed to finally get the cpuid by using a 64 bit version of ubuntu and have managed to get the SBK.. tried the recommended flashs A500 apx etc
but now i'm stuck in apx mode.. when i try to use V8-UNL-ICS-HC-bootloader-MULTI-cwm method I get the failed to format..
info found from this thread http://forum.xda-developers.com/showthread.php?t=1751978
**********************************************************
* Press any key when your A500 is in bootloader mode *
**********************************************************
Press any key to continue . . .
Flashing HC-Bootloader...
Nvflash started
[resume mode]
Formatting partition 4 please wait.. Command Execution failed cmd 13, error 0x12
0002
FAILED!
command failure: format partition failed (bad command)
bootloader status: unknown operation (code: 1) message: flags: 0
Nvflash started
[resume mode]
I think I have an internal storage issue, or bad sectors.. or I am just not using the right apx.. and help would be awesome..
i have read so many forum sections and pieced together which has finally got me into the device.. but now I seem to have hit a brick wall..
so help i have tried to track down the bad sectors software to run in apx mode but cant seem to find it al all the link i have found are dead..
quick update
**********************************************************
* Make your choise: *
*(1) ICS bootloader V8 with TWRP-2.1.3-ICS cwm(touch cwm)*
*(2) ICS bootloader V8 with PubRecovery-v0.2 (BareBones) *
*(3) ICS bootloader V8 with Thor-1.7cwm (touch cwm) *
*(4) ICS bootloader V8 with Thor-1.7.3 NEW cwm(touch cwm)*
* with its compatible recoveries. *
**********************************************************
(1 2 3 4):4
Loading bootloader...
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 4
chip sku: 0x8
chip uid: 0x037c62484260****
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: bct.bct
- 4080/4080 bytes sent
bct.bct sent successfully
odm data: 0x300d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader_apx.bin
| 714981/714981 bytes sent
bootloader_apx.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
failed executing command 25 NvError 0x120002
command failure: sync failed (bad data)
bootloader status: Bct Write Failed (code: 22) message: nverror:0x42008 (0x60420
08) flags: 0
*****************************************************************
* Press any key when your A500/501/G100W is in bootloader mode *
*****************************************************************
Press any key to continue . . .
UPDATE
I have tried running Badsector but all i get it this.. I have checked the correct drivers are installed.. but just seem to be stuck..
I am thinking my internal storage is fried..
****************************************************************
* Before executing, be sure to delete recovery-from-boot.p *
* from /system to ensure recovery will stick *
****************************************************************
****************************************
* Reboot your tablet into APX mode *
****************************************
Generate your SBK with your CPUID from here :
http://vache-android.com/v1/index.php?site=sbk
Enter your SBK:0x****1E00 0x0**51700 0xEB*****2 0x682*****
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 4
chip sku: 0x8
chip uid: 0x037c624842601397
macrovision: disabled
hdcp: enabled
sbk burned: true
dk burned: true
boot device: emmc
operating mode: 4
device config strap: 0
device config fuse: 0
sdram config strap: 0
sending file: flash.bct
- 4080/4080 bytes sent
flash.bct sent successfully
odm data: 0xb00d8011
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 714409/714409 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
creating partition: PT
creating partition: APP
creating partition: EBT
creating partition: GP1
creating partition: SOS
creating partition: LNX
creating partition: CAC
creating partition: MSC
creating partition: FLX
creating partition: AKB
creating partition: UDA
creating partition: GPT
failed executing command 12 NvError 0x120002
command failure: create failed (bad data)
bootloader status: fatal failure to read / write to mass storage (code: 9) messa
ge: nverror:0x8 (0x19000008) flags: 0
Press any key to continue . . .