Related
Hey guys, I was wondering if someone would be willing to help me out. it has been a LONG while since I have owned an android device. as a matter of fact I never truly owned one and my only experience was flashing the TP2 to android and playing with it. I spent the past two years with a WP7 and I loved it but Sprint is taking there sweet ol' time releasing POS low end WP8 so it was time to switch.
I was hoping someone could guide me or point me in the right direction of how to accomplish this. I currently have the galaxy4 and I do like it a lot. I am on stock rom MDL that is rooted with the hot spot mod. my phone got the OTA for the MF9. I looked into being able to root the MF9 and it looks like it is no problem. so I tried to push through the MF9 update but it failed and I believe this is because I am rooted and also modded some system files when I did the hotspot mod. what would be the procedure to update to MF9 from MDL and re-root the device and but the hot spot mod back. if anyone has any guidance it would be most appreciated. Thanks!!
Steveo:laugh:
Questions go in Q&A
Development is for developers to post work
Thread moved
Be Careful I updated to MF9 from MDL and now my phone is no longer rooted and I can't get wifi access
Here is my post:
http://forum.xda-developers.com/showthread.php?t=2372749
steveoski111 said:
Hey guys, I was wondering if someone would be willing to help me out. it has been a LONG while since I have owned an android device. as a matter of fact I never truly owned one and my only experience was flashing the TP2 to android and playing with it. I spent the past two years with a WP7 and I loved it but Sprint is taking there sweet ol' time releasing POS low end WP8 so it was time to switch.
I was hoping someone could guide me or point me in the right direction of how to accomplish this. I currently have the galaxy4 and I do like it a lot. I am on stock rom MDL that is rooted with the hot spot mod. my phone got the OTA for the MF9. I looked into being able to root the MF9 and it looks like it is no problem. so I tried to push through the MF9 update but it failed and I believe this is because I am rooted and also modded some system files when I did the hotspot mod. what would be the procedure to update to MF9 from MDL and re-root the device and but the hot spot mod back. if anyone has any guidance it would be most appreciated. Thanks!!
Steveo:laugh:
Click to expand...
Click to collapse
I was also on MDL stock rom and rooted. I recommend to never take OTA updates if you are rooted. I got MD9 by using info from the post by 'Mudavo': http://forum.xda-developers.com/showthread.php?t=2277480
I used the first one listed of the Index of Guides: "-How to Install Stock MF9 ROM and Firmware". For the 'Choose a Rooted Stock MF9 ROM' I choose the 'odexed no data wipe' zip from 'Crawrj" (FYI at 1.4GB, it's a large file). With 'noobnl' thread, I had to do the ini edit but it's was easy. Don't forget to redo the ini edit when you are done and change it back to what it was before.
Follow it exactly, any problems you can ask 'Mudavo' or 'crawrj' in their post. I have seen others having to repeat the process to make it work so if it doesn't flash the first time, try it again. Hope this helps.
Stock MF9 ROM and Firmware Installation Guide
In TWRP or CWM BACK UP!
Download noobnl's tar from here for MF9 firmware and modem:
http://forum.xda-developers.com/show...php?p=43418277
Choose a Rooted Stock MF9 ROM of choice and Stock MF9 Kernel from here: http://forum.xda-developers.com/show...php?p=43426426
In noobnl's thread, read and apply the instructions on editing the .ini file for the boot loader update in Odin.
Odin flash the MF9 Firmware .tar. Put the .tar in the same folder on your computer that the Odin execution app is. Right click Odin.exe and click run as administrator. Check update phone boot loader. Flash the .tar using PDA mode. Auto reboot checked.
In TWRP or CWM Do a FULL wipe. (system, data, cache, dalvik) Install Stock MF9 ROM and MF9 Kernel.
Profit. You should now be full MF9. You do not need to go any further."
So does that mean that I will wipe all data on my phone, or should I back everything up with root backup? I already did a nandroid, too.
I recently flashed the 4.3 update and immediately rooted and flashed twrp. I then decided to go full stock. I thought I could just Odin back to mf9 and flash the update again. This is not the case. I got back to 4.2.2. But it was not mf9. The software version stayed at mja. The update zip would not install anymore. Odin was failing with errors. My nandroid of 4.3 would not take. Just bootlooped. I thought I was screwed until someone pointed me to a nandroid of boot and system that could be flashed with philz recovery. So I'm back to 4.3. What I'm looking to do is get this to pure stock 4.3. Stock recovery and all. I'll wory about the Knox flags later. Is there anyway this can be done yet?
Sent from my SPH-L720 using xda app-developers app
Should have put this in the qua section...sorry
Sent from my SPH-L720 using xda app-developers app
Thread moved
FNM
prc292 said:
I recently flashed the 4.3 update and immediately rooted and flashed twrp. I then decided to go full stock. I thought I could just Odin back to mf9 and flash the update again. This is not the case. I got back to 4.2.2. But it was not mf9. The software version stayed at mja. The update zip would not install anymore. Odin was failing with errors. My nandroid of 4.3 would not take. Just bootlooped. I thought I was screwed until someone pointed me to a nandroid of boot and system that could be flashed with philz recovery. So I'm back to 4.3. What I'm looking to do is get this to pure stock 4.3. Stock recovery and all. I'll wory about the Knox flags later. Is there anyway this can be done yet?
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Read through this thread and follow the directions. http://forum.xda-developers.com/showthread.php?t=2506562 It will do what you need.
I did use this thread and got back to 4.3 with philz recovery. What I'd really like to do is get completely stock, recovery and all. Gonna have to wait for a 4.3 .tar for an Odin flash. Or maybe someone can figure a way to flash stock recovery back and I can factory restore. This Knox security stuff is for the birds!
Sent from my SPH-L720 using xda app-developers app
I used the MF9 stock recovery after going to MJA in order to do a factory restore. Then I used it again to manually force the update with the cce8d8a155a0602c83356e00311a1695e9a9383f.USER_L720_SPT_MF9_CSB_user_RP_to_MJA_CSB_user_RP_Update_FWD.zip file.
Have you tried just doing an RTN via the phone dialer? Enter ##786# on phone keyboard, Select "reset", Enter MSL.
Both of those methods will wipe everything, of course, so backup using Helium, etc.
I am currently on Sacs custom rom 4.3_v5.6 (latest build) trying to get back to stock 4.4.2 NAE. I have been flashing roms on a pretty consistent basis for about 2 years not but I am stumped this time. I open ODIN and run as an administrator as always, load my stock .tar file into the PDA slot and let it go through the checking process and then I hit start. It starts going for 2 seconds and then fails. I then have to do a battery pull to restart the phone and then my phone hangs up on the "Firmware update was interrupted, please connect to kies screen and that's as far as I can get. I have factory reset phone at least 10 times today. Like I said, I am stumped...any advice would be appreciated.
omahaguy said:
I am currently on Sacs custom rom 4.3_v5.6 (latest build) trying to get back to stock 4.4.2 NAE. I have been flashing roms on a pretty consistent basis for about 2 years not but I am stumped this time. I open ODIN and run as an administrator as always, load my stock .tar file into the PDA slot and let it go through the checking process and then I hit start. It starts going for 2 seconds and then fails. I then have to do a battery pull to restart the phone and then my phone hangs up on the "Firmware update was interrupted, please connect to kies screen and that's as far as I can get. I have factory reset phone at least 10 times today. Like I said, I am stumped...any advice would be appreciated.
Click to expand...
Click to collapse
You need to get back to compete stock to take ota. Go here http://forum.xda-developers.com/showthread.php?t=2660607
Read that thread on how to get to mja stock, then run system/fitness update on the phone: in settings. And take the ota
Sent from my SPH-L720 using XDA Premium 4 mobile app
omahaguy said:
I am currently on Sacs custom rom 4.3_v5.6 (latest build) trying to get back to stock 4.4.2 NAE. I have been flashing roms on a pretty consistent basis for about 2 years not but I am stumped this time. I open ODIN and run as an administrator as always, load my stock .tar file into the PDA slot and let it go through the checking process and then I hit start. It starts going for 2 seconds and then fails. I then have to do a battery pull to restart the phone and then my phone hangs up on the "Firmware update was interrupted, please connect to kies screen and that's as far as I can get. I have factory reset phone at least 10 times today. Like I said, I am stumped...any advice would be appreciated.
Click to expand...
Click to collapse
Were you already on NAE from the OTA before you installed Sacs rom?? If you were, then you can't go back to NAE stock until we have a full tar file for NAE. You can try to install one of the Stock NAE roms in the development section, but until we have the full tar file for NAE you can't odin back to stock, If you weren't already on the NAE OTA, and still have the MK2 bootloader, then odin the full MK2 tar and apply the NAE OTA.
Here is a good place to download MK2: http://forum.xda-developers.com/showthread.php?t=2601443
Remember, if you already are on NAE, you cannot odin older tar files so you have to wait until the full NAE tar is available.
cruise350 said:
Were you already on NAE from the OTA before you installed Sacs rom?? If you were, then you can't go back to NAE stock until we have a full tar file for NAE. You can try to install one of the Stock NAE roms in the development section, but until we have the full tar file for NAE you can't odin back to stock, If you weren't already on the NAE OTA, and still have the MK2 bootloader, then odin the full MK2 tar and apply the NAE OTA.
Here is a good place to download MK2: http://forum.xda-developers.com/showthread.php?t=2601443
Remember, if you already are on NAE, you cannot odin older tar files so you have to wait until the full NAE tar is available.
Click to expand...
Click to collapse
I was on the stock NAE update, so I guess I am stuck until then, not a big problem.
Sacs 4.4.2
Hi all,
Noobie here,
So I couldn't wait either- a junkie per say for a half a dozen Roms but find Sacs Rom to be most impressed with. As Sacs pointed out in the step by steps instructions- when quite successful, as others have pointed out with the camera issue which is a very small and all most not relevant at this time, with wifi I had no issues at all- did run across a small blurb about android.- something was crashing---- But I'm still enjoying it- don't plan to fall back- I am noticing the battery drains a little faster on use- did fix the toggle battery size through 3mint- awesome... Now I'm just waiting on to mods/themes as previous Sacs roms- I've tried loading the pervious versions but found it crashed the Samsung keyboard- so I reflashed 4.4.2------ Thanks for being ahead on this Sacs- great work...
Hello.First post here.
I currently have been using CM11 for a few months now but miss some features on stock. (multiwindow, air view) so I installed Sacs ROM.
Everything was working great today except a known problem is wifi will not work due to radio opbstructions (i believe). So i attempted to change the baseband to MF9.
At first, Odin started then immidately it failed. The error read 'Fused 4 Binary 1'
So i assumed it was a connection error. I loaded back into download mode and tried again. Failed.
At this point i thought screw it, and took the battery out. tried to reboot and stuck at the soft brick "Firmware upgrade encountered and issue. Please select recovery mode in Kies and try again"
I installed Kies. Plugged in my phone. Drivers installed but Kies will not connect. Try to do 'Firmware Upgrade and Initialization'
However Kies will NOT accpet my S/N number. i tried everything. writing it all out or with a space every 3 numbers or with 'DEC' at the front. nothing worked.
I even called sprint to double check S/N (ESN/DEC)
so basically I'm soft bricked and Kies is screwing me over. Any ideas?
Have you tried to odin back to stock?
Sent from my SPH-L720 using XDA Premium 4 mobile app
ROMANTiC KiD said:
Have you tried to odin back to stock?
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thats the one thing i want to avoid.
by reverting to stock wont i lose root access? i have a backup of my old CM ROM from before i flashed sacs. should i revert to stock then restore to CM then reinstall Sacs?
whatthe_fuzz said:
thats the one thing i want to avoid.
by reverting to stock wont i lose root access? i have a backup of my old CM ROM from before i flashed sacs. should i revert to stock then restore to CM then reinstall Sacs?
Click to expand...
Click to collapse
Yes but it takes all but about 30 seconds to root again
You could go straight to sacs after rooting.
Sent from my SPH-L720 using Tapatalk
daniel4653 said:
Yes but it takes all but about 30 seconds to root again
You could go straight to sacs after rooting.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
ok that might leave me with a cleaner install also.
wheres the stock file i can flash on Odin?
also how should i update the radio if it didnt work the first time?
Thank you for the help
whatthe_fuzz said:
ok that might leave me with a cleaner install also.
wheres the stock file i can flash on Odin?
also how should i update the radio if it didnt work the first time?
Thank you for the help
Click to expand...
Click to collapse
If you flash a full stock tar you won't have to flash radio.
Do a search please for the tar.
Sent from my SPH-L720 using XDA Premium 4 mobile app
leaderbuilder said:
If you flash a full stock tar you won't have to flash radio.
Do a search please for the tar.
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i searched around and eventually found a working .md5 file. its apparently is stock. got my phone to start booting but it got stuck at the yellow sprint screen. im going to try to boot into safe mode. any ideas how to access my recovery file? i have one form CWM and one from Ti Backup
which tar did you flash through Odin? MF9, MK2 or NAE?
IF you were on MF9 and flashed the full MF9 tar you can try and flash again. Just power off phone completely, go to download mode, attach and run Odin. (same for MK2 or NAE) BUT if you tried flashing MJA/MK2 or NAE you cannot go back to MF9. Things you should have read about already.
If it hangs on boot after flashing, power off completely, boot to stock recovery and do a factory reset and then let it restart first reboot can take 5 to 10 earth minutes.
You can then root via CF-Autoroot or Saferoot, install goomanager to grab a custom recovery (CWM or TWRP) OR Odin said recoveries (Philz, TWRP etc.)
leaderbuilder said:
which tar did you flash through Odin? MF9, MK2 or NAE?
IF you were on MF9 and flashed the full MF9 tar you can try and flash again. Just power off phone completely, go to download mode, attach and run Odin. (same for MK2 or NAE) BUT if you tried flashing MJA/MK2 or NAE you cannot go back to MF9. Things you should have read about already.
If it hangs on boot after flashing, power off completely, boot to stock recovery and do a factory reset and then let it restart first reboot can take 5 to 10 earth minutes.
You can then root via CF-Autoroot or Saferoot, install goomanager to grab a custom recovery (CWM or TWRP) OR Odin said recoveries (Philz, TWRP etc.)
Click to expand...
Click to collapse
I think i fixed it.
Problems resolved.
The issue was i had Sacs v4 which didnt support wifi and i read that it needed MF9 firmware.
i had a lapse in judgement and without thinking tried to go back from MJA. didnt catch it until now.
I eventually found the correct stock file. eventually got into the phone. rerooted and in the process of install the proper sacs ROM (v5.6)
this was a simple error that i shouldve caught thanks guys!
hopefully this ROM will work with wifi...
BTW, all my backups were wiped
Your backups weren't on your external sd? Ooo, that sucks. Glad you got it.
Sent from my SPH-L720 using XDA Premium 4 mobile app
Hey all, I need some help trying to troubleshoot what went wrong. Note between every flash I did clear cache and full formats of the whole phone.
I was on SACS 4.3 ROM, MK2 and already had CWM recovery
I ODINed the NAE modem, it stuck - my baseband and software say L720VPUFNAE
I flashed SACS 4.4.2 ROM, it went well booted up and setup, but could not provision the network (I had wifi)
I reflashed SACS 4.4 a couple times, same problems. Tried AOKP 4.4, glitchy and froze a lot.
Flashed stock NAE from sprint, installed, but stuck on provisioning again. I checked and it didn't show I had NAE, it showed my baseband and software was UNKNOWN.
Flashed back to SACS 4.3 and everything works well again. Still shows NAE as the baseband and whatnot.
I would have thought I had a bad modem flash, but everything works and shows NAE. What is the issue?
Have you tried a complete ODIN of NAE firmware?
hAvAAck said:
Hey all, I need some help trying to troubleshoot what went wrong. Note between every flash I did clear cache and full formats of the whole phone.
I was on SACS 4.3 ROM, MK2 and already had CWM recovery
I ODINed the NAE modem, it stuck - my baseband and software say L720VPUFNAE
I flashed SACS 4.4.2 ROM, it went well booted up and setup, but could not provision the network (I had wifi)
I reflashed SACS 4.4 a couple times, same problems. Tried AOKP 4.4, glitchy and froze a lot.
Flashed stock NAE from sprint, installed, but stuck on provisioning again. I checked and it didn't show I had NAE, it showed my baseband and software was UNKNOWN.
Flashed back to SACS 4.3 and everything works well again. Still shows NAE as the baseband and whatnot.
I would have thought I had a bad modem flash, but everything works and shows NAE. What is the issue?
Click to expand...
Click to collapse
go to the Phone dial pad and punch in ##786# to pull up the RTN screen, It'll show you more accurate info on than what your Baseband and Software ect. The first time I flashed Sacs 4.4 V1 I flashed it using Phils 6.0.4.7, had the same problem. got it to flash flawlessly using the same process, but using Philz 6.0.4.6. just to be sure that was the issue i repeated process using 6.0.4.7, same problem, wouldnt provision network, just wifi, everything said unknown. couldnt make it work using 6.0.4.7. Tried again using 6.0.4.6, and again everything worked perfect ALSO try flashing the stock NAE.tar.md5 first, then Sacs 4.4 v2. Ive read that worked for many, Your problem is most likey CWM. flash Philz 6.0.4.6 then re try, let me know how it goes
VandyCWG said:
Have you tried a complete ODIN of NAE firmware?
Click to expand...
Click to collapse
Agree with @bioshocked I've ended up with unknown baseband before as well. Flashed nae firmware before the installation worked out perfect.
Sent from my SPH-L720 using xda app-developers app
hAvAAck said:
Hey all, I need some help trying to troubleshoot what went wrong. Note between every flash I did clear cache and full formats of the whole phone.
I was on SACS 4.3 ROM, MK2 and already had CWM recovery
I ODINed the NAE modem, it stuck - my baseband and software say L720VPUFNAE
I flashed SACS 4.4.2 ROM, it went well booted up and setup, but could not provision the network (I had wifi)
I reflashed SACS 4.4 a couple times, same problems. Tried AOKP 4.4, glitchy and froze a lot.
Flashed stock NAE from sprint, installed, but stuck on provisioning again. I checked and it didn't show I had NAE, it showed my baseband and software was UNKNOWN.
Flashed back to SACS 4.3 and everything works well again. Still shows NAE as the baseband and whatnot.
I would have thought I had a bad modem flash, but everything works and shows NAE. What is the issue?
Click to expand...
Click to collapse
it's the exact same story for me .had to go back to 4.3 but my only issue is now i am unable to watch video in any form (personal vids ,Netflix,youtube,vine even cutscenes in games) i really dont know what to do .even tried to Odin back to MF9 but no success.I neeed HELP
@hakeem0996
.even tried to Odin back to MF9 but no success.I neeed HELP
Click to expand...
Click to collapse
If you were on MJA/MK2 bootloader you CANNOT Odin to anything before that - MF9 etc.
You'll need to PC Odin MK2 full tar to get back to stock. That tar is here.
For the others if you have a MK2 or NAE bootloader why not flash the full .tar of either one (MK2 or NAE) - both are available here. Full .tar will restore baseband and ALL partitions.
The for both the above root via CF-Autoroot, install recovery via PC Odin or goomanager - I'd go with Philz via PC Odin.
Then install what ever you want following the developer's instructions.
bioshocked said:
go to the Phone dial pad and punch in ##786# to pull up the RTN screen, It'll show you more accurate info on than what your Baseband and Software ect.
Your problem is most likey CWM. flash Philz 6.0.4.6 then re try, let me know how it goes
Click to expand...
Click to collapse
pontif said:
Agree with @bioshocked I've ended up with unknown baseband before as well. Flashed nae firmware before the installation worked out perfect.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I'll try a full NAE firmware ODIN tonight, but I'm not sure where to get it. Is it this?
hAvAAck said:
Thanks, I'll try a full NAE firmware ODIN tonight, but I'm not sure where to get it. Is it this?
Click to expand...
Click to collapse
No, download the full tar file from Random45's thread in the android development thread. His has great download speed.
Sent from my icrap 2 using Tapatalk HD
cruise350 said:
No, download the full tar file from Random45's thread in the android development thread. His has great download speed.
Sent from my icrap 2 using Tapatalk HD
Click to expand...
Click to collapse
Thanks. Link
hAvAAck said:
Thanks. Link
Click to expand...
Click to collapse
Yup that it.
Sent from my SPH-L720 using Tapatalk
Go back and follow the instructions exactly: Here they are so thanks them and i'll take one too:
thanks goes to travisw0204 and GhostTac for this
This is a step by step instruction guide for those having issues flashing this ROM using a MF9 Bootloader and wanting to keep their bootloader Knox free. This should only be attempted if you have tried the first install option multiple times and are following the instructions completely (unless you are already rooted) and are getting hung up at the Sprint Splash screen. Read these instructions carefully and all the way through BEFORE you do this processes and make sure you are not cutting corners.
1. You need to be on MF9 bootloader
2. You need to flash a stock MDC .tar file. Once downloaded you have to extract the .tar file using 7zipper or a program similar. I got mine from RWilco's site found here..
http://www.rwilco12.com/downloads.ph...9/Stock ROMs
3. Once you have the stock .tar file you can then boot to download mode to prepare for Odin. Power down completely. Then press and hold Power + Vol down. You will see a warning page and then press vol up to get to download mode.*
4. Now plug your phone into your computer and open *Odin. I use 1.85 but some may use a later version. They all work.
5. Once connected to Odin the box in the middle to upper left should be yellow to let you know your phone is connected.*
6. Now click on PDA and find the .tar file for the stock rom that was obtained from rwilco's site. Hit start and let it run its course.*
7. Once Odin says Pass, the phone will reboot and you WILL get a yellow Sprint screen and nothing else. Don’t freak out. Press and hold the Power button and reboot the phone. Then press and hold power + vol up to boot into the stock recovery. From there do a factory reset and then the phone will boot up.*
8. Once fully booted you will have a small OTA update followed by the MF9 OTA update. This is the last OTA you should take.*
9. Once you go through those 2 updates you can then root using cf auto root through Odin (do the steps to get to download mode from above). Let it do its thing and the phone will reboot.*
10. Once you're booted up check to make sure you're rooted by looking for the super SU app in the app drawer.*
11. Now it's time for your custom recovery. Go back into download mode as mentioned above, plug the phone into the computer and open Odin once again to flash the CWM 6.0.4.4 recovery.*
12. Let the phone boot back up after the recovery flash.*
13. Now power down fully again and boot back into download mode.
14. Flash the mk2 modem found here (http://forum.xda-developers.com/show....php?t=2338919) through Odin and boot back up.*
15. Go to Settings and About Device and make sure the baseband and version both match and end with mk2.
16. Now power down again and boot back into download mode. At this point it's time to flash the NAE modem to get you ready for Kit Kat. That modem also can be found at the above link for Unknown or in the OP in this thread.
17. Once you flash the modem through Odin follow Sacs instructions on how to flash the 4.4.2 rom.
It sounds like a lot but really isn't and it will assure you that you're starting with a clean slate and a Knox free bootloader.*
*You can use PDA for all your .tar files for this process in Odin or AP for later Odin programs.*
**This process will also work for those on MJA and MK2 bootloaders with Knox. You can follow the same steps but instead of going back to MDC you have to go to MJA and work up from there. There will only be one OTA update taken and that's from MJA to MK2. Once on MK2 follow Sacs instructions on how to flash the rom and you'll be good to go.
Thanks go out to Unknown and rwilco for their hard work and dedication
hAvAAck said:
Hey all, I need some help trying to troubleshoot what went wrong. Note between every flash I did clear cache and full formats of the whole phone.
I was on SACS 4.3 ROM, MK2 and already had CWM recovery
I ODINed the NAE modem, it stuck - my baseband and software say L720VPUFNAE
I flashed SACS 4.4.2 ROM, it went well booted up and setup, but could not provision the network (I had wifi)
I reflashed SACS 4.4 a couple times, same problems. Tried AOKP 4.4, glitchy and froze a lot.
Flashed stock NAE from sprint, installed, but stuck on provisioning again. I checked and it didn't show I had NAE, it showed my baseband and software was UNKNOWN.
Flashed back to SACS 4.3 and everything works well again. Still shows NAE as the baseband and whatnot.
I would have thought I had a bad modem flash, but everything works and shows NAE. What is the issue?
Click to expand...
Click to collapse
---------- Post added at 01:59 PM ---------- Previous post was at 01:55 PM ----------
I bet you a buck you are not on the right bootloader. Check this using Device info which you can get from the app store. Then foolow the previous instructions i attached.
hAvAAck said:
Hey all, I need some help trying to troubleshoot what went wrong. Note between every flash I did clear cache and full formats of the whole phone.
I was on SACS 4.3 ROM, MK2 and already had CWM recovery
I ODINed the NAE modem, it stuck - my baseband and software say L720VPUFNAE
I flashed SACS 4.4.2 ROM, it went well booted up and setup, but could not provision the network (I had wifi)
I reflashed SACS 4.4 a couple times, same problems. Tried AOKP 4.4, glitchy and froze a lot.
Flashed stock NAE from sprint, installed, but stuck on provisioning again. I checked and it didn't show I had NAE, it showed my baseband and software was UNKNOWN.
Flashed back to SACS 4.3 and everything works well again. Still shows NAE as the baseband and whatnot.
I would have thought I had a bad modem flash, but everything works and shows NAE. What is the issue?
Click to expand...
Click to collapse
KC6UFO said:
]I bet you a buck you are not on the right bootloader. Check this using Device info which you can get from the app store. Then foolow the previous instructions i attached.
Click to expand...
Click to collapse
I was on MK not MF.
bioshocked said:
go to the Phone dial pad and punch in ##786# to pull up the RTN screen, It'll show you more accurate info on than what your Baseband and Software ect. The first time I flashed Sacs 4.4 V1 I flashed it using Phils 6.0.4.7, had the same problem. got it to flash flawlessly using the same process, but using Philz 6.0.4.6. just to be sure that was the issue i repeated process using 6.0.4.7, same problem, wouldnt provision network, just wifi, everything said unknown. couldnt make it work using 6.0.4.7. Tried again using 6.0.4.6, and again everything worked perfect ALSO try flashing the stock NAE.tar.md5 first, then Sacs 4.4 v2. Ive read that worked for many, Your problem is most likey CWM. flash Philz 6.0.4.6 then re try, let me know how it goes
Click to expand...
Click to collapse
I flashed stock NAE and then SACS, same problem. Where can I find Philz 6.0.4.6? All I see are 6.07 and 6.19
Now I'm back stock NAE not rooted and I can't seem to charge the phone. Everytime the screen goes to sleep it wakes back up to reconnect the charger..
leaderbuilder said:
@hakeem0996
If you were on MJA/MK2 bootloader you CANNOT Odin to anything before that - MF9 etc.
You'll need to PC Odin MK2 full tar to get back to stock. That tar is here.
For the others if you have a MK2 or NAE bootloader why not flash the full .tar of either one (MK2 or NAE) - both are available here. Full .tar will restore baseband and ALL partitions.
The for both the above root via CF-Autoroot, install recovery via PC Odin or goomanager - I'd go with Philz via PC Odin.
Then install what ever you want following the developer's instructions.
Click to expand...
Click to collapse
Thanks for your advice I flashed MK2 and flashed 4.3 scas rom and i'm no longer on NAE thank i can play videos again on my phone now my new problems is that my data is really weak now my phone can't even go to the play store without loading for what seamed an eternity . Is there a way i can fix that ? is there a code i can punch in tha reset my signal to make my data stronger .Sorry for nugging you guys .
hakeem0996 said:
Thanks for your advice I flashed MK2 and flashed 4.3 scas rom and i'm no longer on NAE thank i can play videos again on my phone now my new problems is that my data is really weak now my phone can't even go to the play store without loading for what seamed an eternity . Is there a way i can fix that ? is there a code i can punch in tha reset my signal to make my data stronger .Sorry for nugging you guys .
Click to expand...
Click to collapse
update the PRL and Profile in System Updates
leaderbuilder said:
update the PRL and Profile in System Updates
Click to expand...
Click to collapse
i did that already
hakeem0996 said:
i did that already
Click to expand...
Click to collapse
What modem/baseband are you on?