[Q] Unbrick L7 p708 - Optimus L3, L5, L7 Q&A, Help & Troubleshooting

This is a different brick, I flashed a baseband v20 for L5 on the L7, when I rebooted there was only a iluminated black screen, the problem is that I can't enter on any SW/Upgrade, recovery, emergency mode etc. I'm only able to flash with fastboot, but I haven't find a way to reflash baseband or whatever to unbrick my L7.
Could you giveme something to flash and runbrick my L7?
PD: When I try to flash System.img it says "File too large"

Oh I think there is no way... To flash a new baseband you must can boot into recovery... Did you tried CWM on PC?

No
TheAvngrZ said:
Oh I think there is no way... To flash a new baseband you must can boot into recovery... Did you tried CWM on PC?
Click to expand...
Click to collapse
No, how can I do that? do I have to turn on the phone? Because it doesn't enter on any mode, just fasboot

I'm sorry, I can't help you by that thing. Seek for CWM and PC I dont know how to do it...

Enter into the Emergency Mode. By Removing the Battery & Connect to the Charger & Press home+Power+Vol up.Then Flash the ROM again

Thanks, problem solved.
Thanks to everyone, the problem was that I couldn't see when it was on emergency mode, the screen never showed me anything, because it was only in black, anyway, I tried all combination buttons until I fount that vol down+put usb without battery installed new drivers on Windows 8, then finally I could flash stock. Again thanks.

Related

[Q] Stuck at CWM

Hello guys, it doesn't matter which rom i install on my phone, it says installed success but then boot into ClockWorkMod again.
What i'm doing wrong?
My phone is ZTE v880 made in china
I tried to flash using TPT method but then phone but on FTM mode.
But when i connect the phone to the USB, pc does not recognize it on the FTM mode, can i get back my phone or it is bricked forever?
Kindest regards
thomasgm said:
Hello guys, it doesn't matter which rom i install on my phone, it says installed success but then boot into ClockWorkMod again.
What i'm doing wrong?
My phone is ZTE v880 made in china
I tried to flash using TPT method but then phone but on FTM mode.
But when i connect the phone to the USB, pc does not recognize it on the FTM mode, can i get back my phone or it is bricked forever?
Kindest regards
Click to expand...
Click to collapse
helped me a lot
http://www.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/
Yes i followed the steps, problem is that when it boot at FTM mode it is not reconized by pc.
DO you have any other methods?
Did you look at the Special Case: corrupt NV memory in that link it seems to describe your problem and in CWM did u wipe the data , cache before flashing the rom ??
pratul_n said:
Did you look at the Special Case: corrupt NV memory in that link it seems to describe your problem and in CWM did u wipe the data , cache before flashing the rom ??
Click to expand...
Click to collapse
yes, the only problem is that i can't enter into FTM mode =(
Not sure how to proceed now, i think this phone is lost.

[Q] Flash stock with security error

Ok, so I flashed cleanrom ex, and on reboot I got a security error.
I tried to get to recovery, but it wipes data and immediately reboots.
I've tried flashing the stock rom, but lg flash tool tells me it's the wrong device (now thinks it's a D802).
I've been trying to get into TWRP on scrosler and samsunggalaxystig's advice, first by repeatedly trying an adb reboot recovery, then by writing a batch script to do it repeatedly in order to catch it before it reboots.
Problem is, I don't know if I had already had ADB drivers installed on this computer for the G2 (had rooted while at work), and despite installing them more than once, I don't think the device actually has enough time to be recognized as I still have an unrecognized "g2" in device manager while TWRP is wiping.
Any ideas? Is there any way I can force the install of the ADB driver without having it connected for more than 20 seconds? Spitballing... would it be possible to actually flash a D802 image so I could then root, change the build.prop to D800, and then flash the D800 image?
Totally at a loss at this point.
did you solve your problem? i have a similar problem and i just bricked an s3. this g2 is brand new and now it's bricked too! if you have found a solution please respond... :crying:
kureta said:
did you solve your problem? i have a similar problem and i just bricked an s3. this g2 is brand new and now it's bricked too! if you have found a solution please respond... :crying:
Click to expand...
Click to collapse
No problem if you brick a sammy phone. its easy to flash stock rom. How did you brick your g2?
---------- Post added at 08:13 PM ---------- Previous post was at 08:11 PM ----------
lastdeadmouse said:
Ok, so I flashed cleanrom ex, and on reboot I got a security error.
I tried to get to recovery, but it wipes data and immediately reboots.
I've tried flashing the stock rom, but lg flash tool tells me it's the wrong device (now thinks it's a D802).
Totally at a loss at this point.
Click to expand...
Click to collapse
Why did flashing a rom leads you to that error? Sorry but not familiar with your roms but is this rom really for your LG G2 model?
lastdeadmouse said:
Ok, so I flashed cleanrom ex, and on reboot I got a security error.
I tried to get to recovery, but it wipes data and immediately reboots.
I've tried flashing the stock rom, but lg flash tool tells me it's the wrong device (now thinks it's a D802).
I've been trying to get into TWRP on scrosler and samsunggalaxystig's advice, first by repeatedly trying an adb reboot recovery, then by writing a batch script to do it repeatedly in order to catch it before it reboots.
Problem is, I don't know if I had already had ADB drivers installed on this computer for the G2 (had rooted while at work), and despite installing them more than once, I don't think the device actually has enough time to be recognized as I still have an unrecognized "g2" in device manager while TWRP is wiping.
Any ideas? Is there any way I can force the install of the ADB driver without having it connected for more than 20 seconds? Spitballing... would it be possible to actually flash a D802 image so I could then root, change the build.prop to D800, and then flash the D800 image?
Totally at a loss at this point.
Click to expand...
Click to collapse
Hey I'm in the exact same position as you... did you manage to figure out a way to get into recovery?
kureta said:
did you solve your problem? i have a similar problem and i just bricked an s3. this g2 is brand new and now it's bricked too! if you have found a solution please respond... :crying:
Click to expand...
Click to collapse
twrp corrupted my cache partition and the phone could not boot. i tried to flash cwm while in twrp and i guess i messed up recovery and/or boot partitions. al i could get was fastboot. i flashed a boot.img i got from somewhere in here. now it says security error and it does not boot. it does not enter into fasboot. i can enter into recovery mode but it is the stock lg recovery and if i choose "delete all data", which is the only option, it gives an error and restarts.
if i try to flash stock firmware as described in this post it stops at 49%.
kureta said:
twrp corrupted my cache partition and the phone could not boot. i tried to flash cwm while in twrp and i guess i messed up recovery and/or boot partitions. al i could get was fastboot. i flashed a boot.img i got from somewhere in here. now it says security error and it does not boot. it does not enter into fasboot. i can enter into recovery mode but it is the stock lg recovery and if i choose "delete all data", which is the only option, it gives an error and restarts.
if i try to flash stock firmware as described in this post it stops at 49%.
Click to expand...
Click to collapse
I am on the same boat, same problem, and don't know what else to do...hope someone could help us out.
Yep me to same issue. Pretty much tried 6 different methods and still stuck
Solution
IF you still have guys this issue i have solusion for you .
This happened to me yesterday too
1. Download ADB drivers for LG G2 LINK
2. Download LG Mobile Support Tool you can find this here LINK
3. HOLD VOLUMEUP + POWER button to enter the download mode and connect your device to pc
4. Run LG Mobile Support Tool ( if your device vas found click settings select upgrade firmware this will download for you 1.9 GB STOCK FIRMWARE
5. Enjoy your mobile
Any luck anyone? I can't get the suggestion in the last post to work because my phone just goes from the LG Logo to Security Error. I can't get to download mode. Or recovery. Or get ABD to see it.
Odd
quatrix1 said:
IF you still have guys this issue i have solusion for you .
This happened to me yesterday too
1. Download ADB drivers for LG G2 LINK
2. Download LG Mobile Support Tool you can find this here LINK
3. HOLD VOLUMEUP + POWER button to enter the download mode and connect your device to pc
4. Run LG Mobile Support Tool ( if your device vas found click settings select upgrade firmware this will download for you 1.9 GB STOCK FIRMWARE
5. Enjoy your mobile
Click to expand...
Click to collapse
i have to choose upgrade recovery and it gets past analyzing then doesnt show a bar for downloading software...
HELP!!!!!!!!!!!!!!!!!!!!!
Can someone help me I successful in installing twrp though autorec apk and the same for rooting my g2. I flashed cm with nightlies and noticed that twrp had a update. I downloaded the zip and try flashing it like flash a recovery in flashify but that din't work and readed that zip flashing though twrp didn't work but renumber this video and though it would update my recovery to 2.7.1 but it was successful in doing so but when I got to recovery it was 2.7.0. That not the problem form there I tried to boot into my system. Then it turn off though that I passed power off instead but when turn my g2 back on I found that I had a security error show up then turn back off. So can someone help show me a tutorial on unbick or a way to remove error. Also I have the d800 and i have some idea without going though unbicking a hard factory rest or flasing twrp form there site in fastboot. Finally that lg mobile support tool say that im up to date. I think doing the autorec twrp recovery locked as my phones recovery like trying to flash a rom with a locked bootloader.
Ok guys i trying to help cause it happen to me too,sorry for my english too slow but i try,when you try go twrp with volume up+power buttom it still show security errow,that ok your device not hardbrick yet,when you try volume down+power buttom it show hard reset it does mean it clear all rom,picture in internal but it go to twrp again,and them just flash another rom in your device and it done,have great day piece
I had the same problem on my G2 was using twrp to flash cyanogenmod not sure what i did and phone rebooted to show security error message. I entered recovery mode (power and volume down release when logo pops up and press power and volume down again hold for a second then tap both buttons a few times) pulled up the option to factory reset so i did and it booted me into twrp and allowed me to flash cyanogenmod correctly this time and the phone started back up with no problems. hope this can help someone else as well.
Anybody know the solution?
I also have the security error boot loop after flashing KK baseband files... I tried to enter recovery mode by holding vol down & power button but it wont work...
it does work when i enter download mode (vol up + power button), but i don't want to have to download the stock LG ROM..
anybody know how to by pass the security error boot loop to allow me to reflash?
kureta said:
did you solve your problem? i have a similar problem and i just bricked an s3. this g2 is brand new and now it's bricked too! if you have found a solution please respond... :crying:
Click to expand...
Click to collapse
if you still bricked. try this
get your tools from here: http://forum.xda-developers.com/showthread.php?t=2432476
keep reading or follow above thread. both will work.
best of luck.
After all the drivers installed correctly
make sure your phone is connected to the
com41 port change it if it already not ( Under device manager > Go to Ports (COM & LPT). You should see LGE AndroidNet etc... Right click it and go to Properties > Port Settings > Advanced > Change COM Port Number to COM41 > OK > OK > Close Device Manager )
run flash tool
1. choose type CDMA
2. chose PhoneMode: DIAG
leave rest as it is.
3. choose your kdz file.
then go to download mode
1. power off
2. press and hold vol + key and plug usb cable
3. done )
We have go 2 flashing modes.
1. Normal Flash is for flash with keeping data
2. CSE flash is totally new start preffered.
hope this helps.
thanks but it was a long time ago and I further messed up things, ended up sending it for warranty. they have replaced the device.
me too messed up my cell 1st i was on cloudy g2 v2.1 installed cm11 nightlies but the camera was not so good so then installed cloudy g2 v2.1 n since then i was having problem regarding sound during call and also some hard noise like siren starts randomly, i searched alot but didnt got any solution. wiped all many times (including internal storage ). but no luck then i thought i might be baseband error so i just downloaded auto recovery n flashed it n then stuck into security error but thank GOD i had custom rom in my sd card that time i flashed it back but still em having the sound error.
lastdeadmouse said:
Ok, so I flashed cleanrom ex, and on reboot I got a security error.
I tried to get to recovery, but it wipes data and immediately reboots.
I've tried flashing the stock rom, but lg flash tool tells me it's the wrong device (now thinks it's a D802).
I've been trying to get into TWRP on scrosler and samsunggalaxystig's advice, first by repeatedly trying an adb reboot recovery, then by writing a batch script to do it repeatedly in order to catch it before it reboots.
Problem is, I don't know if I had already had ADB drivers installed on this computer for the G2 (had rooted while at work), and despite installing them more than once, I don't think the device actually has enough time to be recognized as I still have an unrecognized "g2" in device manager while TWRP is wiping.
Any ideas? Is there any way I can force the install of the ADB driver without having it connected for more than 20 seconds? Spitballing... would it be possible to actually flash a D802 image so I could then root, change the build.prop to D800, and then flash the D800 image?
Totally at a loss at this point.
Click to expand...
Click to collapse
kureta said:
did you solve your problem? i have a similar problem and i just bricked an s3. this g2 is brand new and now it's bricked too! if you have found a solution please respond... :crying:
Click to expand...
Click to collapse
k2thejx5 said:
Yep me to same issue. Pretty much tried 6 different methods and still stuck
Click to expand...
Click to collapse
Hey guys, I was in the same boat for a little but was able to fix it by downloading the 801C firmware and flashing it. The firmware file should be a KDZ extension and you should also download LG Flash Tool 2014. Turn the phone on by holding the Power button and Volum up while it is plugged into your computer(It has to be plugged into a computer with LG phone drivers or it won't work).
Follow this tutorial and you will be set.
http://www.droidviews.com/how-to-restore-lg-g2-to-stock-firmware/
Start at step 17 on Method 1 and you should be golden.
Hope this helps guys!

[Q] stuck on boot, no rom installed and can´t enter recovery

I´m stuck on boot and I don´t know why but I can´t enter in recovery mode with the volume down and power button combination. I was in TWRP recovery and had a failed rom flash, but I accidently touched the reboot button and now I´m stuck on the LG logo . No button combination is working for me :/ sorry for my english and pls help me what should I do?
Radon7 said:
I´m stuck on boot and I don´t know why but I can´t enter in recovery mode with the volume down and power button combination. I was in TWRP recovery and had a failed rom flash, but I accidently touched the reboot button and now I´m stuck on the LG logo . No button combination is working for me :/ sorry for my english and pls help me what should I do?
Click to expand...
Click to collapse
A failed ROM flash shouldn't affect your /recovery partition. Unless it included a Recovery of course. What ROM did you flash? Your Kernel is probably stuck trying to load a non-existent user space (no ROM/bad system partition).
Make sure your device is fully powered off by holding the POWER button for 30 seconds. This will make sure your device is OFF.
I know you've tried one of these methods, but try both of these methods to access recovery JUST IN CASE..
Method 1 (JB Bootloader).
Turn device OFF. Press and HOLD Power + Volume Down. When the LG Logo appears let go of both buttons and again press and HOLD Power + Volume DOWN.
Method 2 (KK Bootloader).
Turn device OFF. Press and HOLD Power + Volume Down. When the LG Logo appears let go of both buttons and HOLD Volume UP + Volume DOWN.
Can you access Download Mode?
Turn phone OFF. Hold Volume UP and plug phone into PC via USB.
thank you for the fast reply, I tried it but I can´t access recovery mode.
But download mode is working, what would be the next step?
Radon7 said:
thank you for the fast reply, I tried it but I can´t access recovery mode.
But download is working, what would be the next step?
Click to expand...
Click to collapse
Return to Stock :good:.
I'm curious though.. what ROM did you try to flash?
I´m downloading right now thanks for your help.
But there are a few questions I would like to ask what does the download mode look like? I know it´s kind of a silly question but it shows
"firmware update
do not unplug the USB connection until the process is complete
0%
USER B84
ROOTED"
on my device is that normal? and my other question is am I going to lose all my data after flashing that kdz?
edit: I flashed a stock lp rom and it showed SystemUI error after boot so I couldn´t use it at all, at this point the button combinations for the recovery mode weren´t working,too but after waiting some time the SystemUI error was gone and I could use my phone for a few seconds so I kind of managed it to enter into recovery mode an tried to flash the latest darkobas rom but that failed...
Radon7 said:
I´m downloading right now thanks for your help.
But there are a few questions I would like to ask what does the download mode look like? I know it´s kind of a silly question but it shows
"firmware update
do not unplug the USB connection until the process is complete
0%
USER B84
ROOTED"
on my device is that normal? and my other question is am I going to lose all my data after flashing that kdz?
Click to expand...
Click to collapse
Yes, that's the normal Download Mode screen.
B84 is your Battery Percentage.
The ROOTED text is just telling you that your phone has been Rooted.
When flashing your KDZ you have 2 options.. CSE Flash and Normal Flash.
CSE Flash will wipe all partitions. Choose this if you want to start fresh.
Normal Flash will wipe some partitions and keep your data.
Don't change any of the other options!
I recommend you do a CSE Flash too be honest. I haven't messed with Lollipop enough and have never done a Normal Flash over it.
for some reason it is failing at 2%
Radon7 said:
for some reason it is failing at 2%
Click to expand...
Click to collapse
Is that using Normal Flash?
Have you tried CSE Flash?
What model variant of the G2 do you have?
Lollipop changes your partition scheme a little so trying to flash a KK KDZ over a Lollipop partition scheme will cause errors, unless you do a CSE Flash. This is also why once you flash LP you can't just flash a KK ROM afterwards. First you need to revert your partition scheme back to what KK needs.
So with all that said.. do a CSE Flash. If you're rooting and flashing data using custom recovery you should always have a back up of all your data/media on your PC anyway .
it´s the same using both methods normal and cse :/
I have the d802 version, and I´m trying to flash a lollipop kdz, should I try it with a kitkat one?
I also found this thread but I don´t know if it´s useful because I need working recovery for it to work I think
http://forum.xda-developers.com/lg-g2/development-d802/fix-lg-flash-tool-stuck-2-t3031112
Radon7 said:
it´s the same using both methods normal and cse :/
I have the d802 version, and I´m trying to flash a lollipop kdz, should I try it with a kitkat one?
I also found this thread but I don´t know if it´s useful because I need working recovery for it to work I think
http://forum.xda-developers.com/lg-g2/development-d802/fix-lg-flash-tool-stuck-2-t3031112
Click to expand...
Click to collapse
Yes try a KK KDZ. If the KK KDZ continues to fail, try the TOT Method (the TOT method is under the KDZ method).
Yes that's the post I made a while ago.. which I was going to possibly link you to if you had a D802 .. but I forgot you can't seem to access Recovery at all.

LG G2 Hard Bricked

So I wiped the system partition on my LG G2/D800 (mostly out of stupidity) and now I'm stuck in the boot loop.
Symptoms are following:
1. Stuck in the boot loop
2. Will not go into download or recovery mode
3. When turning on the LG logo appears and disappears repeatedly
4. Device is not detected when plugged into the USB
5. Factory reset using VolDown+Power doesn't do anything
I've tried most of the ideas I've been able to find on the forum, but it looks like I'm stuck mostly because I cannot enter download mode and the phone is not detected in any way when plugged into the USB (no many partitions or anything).
Will be grateful for any ideas how to get out of it?
meseer said:
So I wiped the system partition on my LG G2/D800 (mostly out of stupidity) and now I'm stuck in the boot loop.
Symptoms are following:
1. Stuck in the boot loop
2. Will not go into download or recovery mode
3. When turning on the LG logo appears and disappears repeatedly
4. Device is not detected when plugged into the USB
5. Factory reset using VolDown+Power doesn't do anything
I've tried most of the ideas I've been able to find on the forum, but it looks like I'm stuck mostly because I cannot enter download mode and the phone is not detected in any way when plugged into the USB (no many partitions or anything).
Will be grateful for any ideas how to get out of it?
Click to expand...
Click to collapse
so vol up and then plug usb, does not take you to download mode?
if not try using srk tools.. if that doesnt work i think you need to short circuit your motherboard.
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
and to go back to stock d800 variant..you said you have..
http://forum.xda-developers.com/showpost.php?p=65643825&postcount=4
raptorddd said:
so vol up and then plug usb, does not take you to download mode?
if not try using srk tools.. if that doesnt work i think you need to short circuit your motherboard.
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
and to go back to stock d800 variant..you said you have..
http://forum.xda-developers.com/showpost.php?p=65643825&postcount=4
Click to expand...
Click to collapse
Indeed I cannot enter download mode with vol up then plug usb.
Good news is that I was able to enter qhsusb mode by short circuiting the moterboard. I used srktools to unbrick in qhsusb mode, however it didn't work. The linked guide recommends to flash only laf.img, aboot.img and boot.img. I don't really understand how flashing more can hurt. I also don't completely understand why flashing these should help. After all, I messed only with the system partition. I'll try to follow the guide more closely, but I'm thinking that a better idea would be to flash system partition in a qhsusb mode. I just need to figure out where to get system.img from.
meseer said:
Indeed I cannot enter download mode with vol up then plug usb.
Good news is that I was able to enter qhsusb mode by short circuiting the moterboard. I used srktools to unbrick in qhsusb mode, however it didn't work. The linked guide recommends to flash only laf.img, aboot.img and boot.img. I don't really understand how flashing more can hurt. I also don't completely understand why flashing these should help. After all, I messed only with the system partition. I'll try to follow the guide more closely, but I'm thinking that a better idea would be to flash system partition in a qhsusb mode. I just need to figure out where to get system.img from.
Click to expand...
Click to collapse
So now I can consistently get into ghsusb mode by short curcuiting the motherboard, and I can flash img files with dd. I flashed every partition from the stock FW which was on my phone. Now when hold vol up and plug in usb, I'm ending up in a stock recovery. However, I still cannot enter download mode and the phone still suffers from boot loop if I choose to reboot the phone.
meseer said:
Indeed I cannot enter download mode with vol up then plug usb.
Good news is that I was able to enter qhsusb mode by short circuiting the moterboard. I used srktools to unbrick in qhsusb mode, however it didn't work. The linked guide recommends to flash only laf.img, aboot.img and boot.img. I don't really understand how flashing more can hurt. I also don't completely understand why flashing these should help. After all, I messed only with the system partition. I'll try to follow the guide more closely, but I'm thinking that a better idea would be to flash system partition in a qhsusb mode. I just need to figure out where to get system.img from.
Click to expand...
Click to collapse
am not so sure about laf and rest of stuff.
i know tha once i had the qhusb mode all i had to do is enter download and flash TOT using flash tools.
lg g2 vs980 wont turn on or charge or regconized by pc
i have a probleme with my lg g2 vs980 . when i try to install tho cyanogenmod rom . at firt i intall it and it shows that no sim card. i tried to reintall it again so i have install again the the custom recovery and when i tryien to press the volum downd and power but the phone turned of and evrything is black . i tried to turn it on or charge it but but it didn't . i tried to connect it to pc it didn't get regconized. when i turn it on the phone vibrate but not turned on .plz help me
Bourakhma said:
i have a probleme with my lg g2 vs980 . when i try to install tho cyanogenmod rom . at firt i intall it and it shows that no sim card. i tried to reintall it again so i have install again the the custom recovery and when i tryien to press the volum downd and power but the phone turned of and evrything is black . i tried to turn it on or charge it but but it didn't . i tried to connect it to pc it didn't get regconized. when i turn it on the phone vibrate but not turned on .plz help me
Click to expand...
Click to collapse
go back to stock
you can try the srk tools 2.1 and see if you can get nuke download.
or read here
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404

P9 Lite L22 stuck

Hi. my huawei p9 lite vns-l22 it gets stuck in your device is booting now.
And no, drain the battery dont works in this case.
And i can enter in my custom recovery TWRP, or in the bootloader.
Only in the stock recovery and the update mode.
Please i need help. And sorry for my bad english.
Veget4 said:
Hi. my huawei p9 lite vns-l22 it gets stuck in your device is booting now.
And no, drain the battery dont works in this case.
And i can enter in my custom recovery TWRP, or in the bootloader.
Only in the stock recovery and the update mode.
Please i need help. And sorry for my bad english.
Click to expand...
Click to collapse
Hi dude,
if you're on stock rom try this:
reboot in bootloader/fastboot mode, connect the device to your PC,
open the prompt and type fastboot reboot.... you should solve.
Instead if you're on custom rom let me know.
If you installed some software/app and stucked into bootlooping,
you should be aware of which app you installed last and booting in recovery mode (TWRP)
try to delete it manually.
Cheers
Well
Dadditz said:
Hi dude,
if you're on stock rom try this:
reboot in bootloader/fastboot mode, connect the device to your PC,
open the prompt and type fastboot reboot.... you should solve.
Instead if you're on custom rom let me know.
If you installed some software/app and stucked into bootlooping,
you should be aware of which app you installed last and booting in recovery mode (TWRP)
try to delete it manually.
Cheers
Click to expand...
Click to collapse
Thats the problem.
I can enter in the bootloader, the phone have the TWRP, are now whats happen but i can enter in the custom recovery.
The screen turns black and grey.
youtube com/watch?v=h9oMBpD0MZQ&feature=youtu.be
The phone dont have a custom rom, is the stock rom.
I erase the system and data in the TWRP, because a problem with my google acount in the phone. but it was worse for the phone.
The only thing i have to do is enter in the stock recovery, and the software installer(vol+ vol - and power).
I cant use the ADB minimal and fastboot. The phone is reconized by the PC, but the program no.
I think this is the only possibility, i download many firnwares, but in all the screen shows "Software install failed incompatible with current version"
In the 3% or 10%.
Veget4 said:
Thats the problem.
I can enter in the bootloader, the phone have the TWRP, are now whats happen but i can enter in the custom recovery.
The screen turns black and grey.
youtube com/watch?v=h9oMBpD0MZQ&feature=youtu.be
The phone dont have a custom rom, is the stock rom.
I erase the system and data in the TWRP, because a problem with my google acount in the phone. but it was worse for the phone.
The only thing i have to do is enter in the stock recovery, and the software installer(vol+ vol - and power).
I cant use the ADB minimal and fastboot. The phone is reconized by the PC, but the program no.
I think this is the only possibility, i download many firnwares, but in all the screen shows "Software install failed incompatible with current version"
In the 3% or 10%.
Click to expand...
Click to collapse
Wow, you erased system and data ? that's the reason because it will not boot dude.
Fortunately fastboot mode and twrp works and i think that will help you
bring your device back to life.
Do you remember latest firmware of your device ?
Which TWRP version are on ?
mmm
Dadditz said:
Wow, you erased system and data ? that's the reason because it will not boot dude.
Fortunately fastboot mode and twrp works and i think that will help you
bring your device back to life.
Do you remember latest firmware of your device ?
Which TWRP version are on ?
Click to expand...
Click to collapse
Firnware version mmm.
I dont remenber the firnware version.
Are now this help, but the phone in Fing(an app to see who is in your WiFi network).
The Phone model are G9. A P9 Lite G9. Is a VNS-L22 of latin america(i think).
And the phone is in Android 6.0 stock, and the TWRP version is 3.1.0-2
Fastboot mode ?
The vol + vol - and power combination ?
And no, the TWRP dont works, dont enter in there. The phone stucks entering in the custom recovery. But the stock recovery works. The custom no, the stock yes.
Veget4 said:
Firnware version mmm.
I dont remenber the firnware version.
Are now this help, but the phone in Fing(an app to see who is in your WiFi network).
The Phone model are G9. A P9 Lite G9. Is a VNS-L22 of latin america(i think).
And the phone is in Android 6.0 stock, and the TWRP version is 3.1.0-2
Fastboot mode ?
The vol + vol - and power combination ?
And no, the TWRP dont works, dont enter in there. The phone stucks entering in the custom recovery. But the stock recovery works. The custom no, the stock yes.
Click to expand...
Click to collapse
You flashed the TWRP but don't work ?
Fastboot mode is bootloader mode so.....
what happen if you turn off the device and restart it
holding vol - and power button until it boot into system/bootloader ?
And vol + vol - and power buttons = three buttons aka DLOAD method are used to flash a firmware
but only in android 6.
Without know the latest firmware you was running on your device
it's very difficult to revive the phone, regardless of the type of device...
Another way to try to revive the phone is a rebrand but it is a bit difficult
and you need the correct files with a working TWRP...
Sorry dude i think i cannot help you anymore...
I wish you the best
Dadditz said:
You flashed the TWRP but don't work ?
Fastboot mode is bootloader mode so.....
what happen if you turn off the device and restart it
holding vol - and power button until it boot into system/bootloader ?
And vol + vol - and power buttons = three buttons aka DLOAD method are used to flash a firmware
but only in android 6.
Without know the latest firmware you was running on your device
it's very difficult to revive the phone, regardless of the type of device...
Another way to try to revive the phone is a rebrand but it is a bit difficult
and you need the correct files with a working TWRP...
Sorry dude i think i cannot help you anymore...
I wish you the best
Click to expand...
Click to collapse
A the fastboot is the bootloader.
I think it was a different things.
I still try to fix this phone.
Well, thanks for the help
Veget4 said:
A the fastboot is the bootloader.
I think it was a different things.
I still try to fix this phone.
Well, thanks for the help
Click to expand...
Click to collapse
you fixed this problem? I have same phone so i want to fix your phone if it still stuck.

Categories

Resources