Computer does not recognize the phone on download mode - Galaxy S 4 Q&A, Help & Troubleshooting

Hello guys. My problem is this. When my phone is normal, kies and odin both recognizes the phone. But when it is on download mode, usb drivers give error. SAMSUNG Mobile USB CDC Composite Device failed. It is the name of usb driver. It only happens on download mode. What can I do ? Windows 7, Rooted Phone and Android 4.2.2.

zallas said:
Hello guys. My problem is this. When my phone is normal, kies and odin both recognizes the phone. But when it is on download mode, usb drivers give error. SAMSUNG Mobile USB CDC Composite Device failed. It is the name of usb driver. It only happens on download mode. What can I do ? Windows 7, Rooted Phone and Android 4.2.2.
Click to expand...
Click to collapse
Take a look: HERE

driver problem in download mode
Joku1981 said:
Take a look: HERE
Click to expand...
Click to collapse
Device Manager of my laptop is showing error of "SAMSUNG MOBILE USB CDC COMPOSITE DEVICE" in download mode.
I reinstalled the driver in diffrant laptops. But not got solution.
I am using CWM recovery, and when i am powering on the phone directly CWM recovery is showing (android is not running ) and Showinng
ClockworkMod Recovery v6.0.3.6
Warning: Nofile_conttexts.
Please help me out
Prateek
[email protected]

Related

ODIN not recognizing phone

I recently soft-bricked my Vibrant so now it get stuck at the Vibrant screen and it is hardware locked. I can get my phone into download mode using adb but then it does not show up in ODIN. When I plug the phone in during the Vibrant screen, it shows up as COM 6 but then it is removed when it gets to Download mode.
I searched around for a while looking for a solution and tried a bunch of things but nothing worked.
Also, when I plug my phone in during download mode, it says "The USB device attached to the computer has malfunctioned and Windows does not recognize it."
I'm on Windows XP 32-bit
PC Not Recognizing Vibrant in Download Mode
My stock, rooted Vibrant was soft-bricked by the latest update. I've been following the instructions on this thread: forum.xda-developers.com/showthread.php?t=803492, but cannot get Odin to recognize the device in Download Mode.
One caveat of my current situation is that I'm running Windows XP (32bit) on VMWare on a Mac. Not sure if this is the cause of my pain, but I simply don't have a PC handy.
Currently, when the phone is connected via USB in Recovery Mode, it mounts and everything is cheery. Even on the Mac side, adb recognizes the device and lets me tunnel into it. But the instant I boot into Download Mode the computer no longer recognizes it.
I've reinstalled drivers, tried using 64-bit versions of drivers, tried Kies, but Odin simply does not see the device in Download Mode.
Has anyone experienced this and resolved the issue? Should I hunt down a PC and ditch VMware? That's pretty much my final option prior to heading down to T-Mobile.
theorginazation said:
I recently soft-bricked my Vibrant so now it get stuck at the Vibrant screen and it is hardware locked. I can get my phone into download mode using adb but then it does not show up in ODIN. When I plug the phone in during the Vibrant screen, it shows up as COM 6 but then it is removed when it gets to Download mode.
I searched around for a while looking for a solution and tried a bunch of things but nothing worked.
Also, when I plug my phone in during download mode, it says "The USB device attached to the computer has malfunctioned and Windows does not recognize it."
I'm on Windows XP 32-bit
Click to expand...
Click to collapse
What version of Odin were you using 1.0 or 1.3?
ckalima said:
My stock, rooted Vibrant was soft-bricked by the latest update. I've been following the instructions on this thread: forum.xda-developers.com/showthread.php?t=803492, but cannot get Odin to recognize the device in Download Mode.
One caveat of my current situation is that I'm running Windows XP (32bit) on VMWare on a Mac. Not sure if this is the cause of my pain, but I simply don't have a PC handy.
Currently, when the phone is connected via USB in Recovery Mode, it mounts and everything is cheery. Even on the Mac side, adb recognizes the device and lets me tunnel into it. But the instant I boot into Download Mode the computer no longer recognizes it.
I've reinstalled drivers, tried using 64-bit versions of drivers, tried Kies, but Odin simply does not see the device in Download Mode.
Has anyone experienced this and resolved the issue? Should I hunt down a PC and ditch VMware? That's pretty much my final option prior to heading down to T-Mobile.
Click to expand...
Click to collapse
It's the Mac....sounds like you've done everything correctly. do you have the option for Parallels?
Download mode uses a different usb driver. If you are running in a vm you need to set the vm app to pass that usb device thru to the guest os.. i use odin in virtualbox on linux just fine. I haven't tried it on osx though. There's also an app in development in the i9000 dev forum that runs natively on osx.
@shinybuddha unfortunately parallels is not an option, but I could likely hunt down a PC
@ttabbal thanks for the tip, I've been suspicious of the drivers. Currently I have version 5.2.0.5 installed, and when connecting the Vibrant in download mode, a "Generic Serial Device" appears, but fails to connect.
Unfortunately the device exhibits the same behavior on the Mac side, and isn't being recognized in Download Mode, at least not by "adb devices".
Is there a specific driver I should install in the virtual XP os? Or could you provide a link to the osx app?
I think I need to find a PC. After scouring the forums it appears there has been no successful Odin use on a Mac via VM.
forum.xda-developers.com/showpost.php?p=7854560&postcount=12
Also discovered this interesting bit from the Heimdall developer:
After some serious investigation and a bit low-level debugging it appears as though there is very little I can do to correct the GT-I9000's lack of USB specification compliance when in download mode. When in download mode the GT-I9000 is using an embedded Gadget Serial driver and not the one provided by the linux kernel (zImage). As such I have made Samsung aware of the issue although I don't know if they will resolve it or how long it will take.
Click to expand...
Click to collapse
forum.xda-developers.com/showthread.php?t=755265&highlight=heimdall&page=16
Found a Windows Vista 64-bit installation and followed the directions on the following thread:
forum.xda-developers.com/showthread.php?t=803492
My Vibrant is back! Done in 30 minutes, after spending 3 days trying to get it to work via VM on a Mac. Sometimes iCan't.
Just to help out anyone else with a similar problem using Windows directly... I also found that Odin would recognize my phone when on normally but not in download mode. To solve, what I did was put the phone in download mode, then open up device manager and there was a new unknown device... gave it the path to the downloaded drivers and let it install. Then another unknown device popped up (might have to close and reopen device manager, or refresh, or unplug and plug phone). Pointed it to drivers download again and it magically appeared in Odin.
Aerankas said:
Just to help out anyone else with a similar problem using Windows directly... I also found that Odin would recognize my phone when on normally but not in download mode. To solve, what I did was put the phone in download mode, then open up device manager and there was a new unknown device... gave it the path to the downloaded drivers and let it install. Then another unknown device popped up (might have to close and reopen device manager, or refresh, or unplug and plug phone). Pointed it to drivers download again and it magically appeared in Odin.
Click to expand...
Click to collapse
What drivers did you "point" too. Im having the same issue as you, except in my device manager is says "Gadget Serial." Either way, I need my PC to recognize my phone in download mode so please help!
I had the same proble. It showed Gadget serial in device manager. I uninstalled all other samsung and keis related drivers and installed 5.2.0.4 and it worked out fine. You can download them from here. Good luck.
http://forum.xda-developers.com/showthread.php?t=728929
omg thanks
ya, the other drivers were screwed somehow, switched to these and bam... odin sees the vibrant. Thanks in bunches, lifesaver move there

[Q] Odin can't detect download mode.

So I already tried reading most of the threads about this problem but sadly I wasn't able to find the answer to my problem. I just recently reformatted my computer and thought that I want to return to stock ROM for now. But when I entered download mode and plugged the cable in, Odin cannot detect the phone.
I got frustrated after trying so I restarted my phone without disconnecting the cable. When the phone booted up normally, Odin was able to detect the phone, so I tried download mode again, nothing, now I tried recovery mode, detected.
I already tried:
- Installing Kies
- Installing just the drivers
- Trying debug on/off
Also, I've been having problems with "Samsung Mobile USB Modem" "An error occurred during the installation of the device. The required section was not found in the INF." Could this be the cause of the first problem?
Yes I just made this account to ask you guys this.
try new version odin search at caliban666 thread,if im not wrong he post a new version of odin.try installing a new samsung driver at dokys thread.i hope this will help u...
Try installing the drivers again..
If possible download them again..
**rooting is new for me...and i am noob to root...**
So only the download mode that isn't detected by odin? I have the same problem before. Here, when you go into download mode but odin doesn't detect your phone, press the power button until your phone turns black and don't let it to reboot. If your phone already turns black then go into download mode again (volume down+power+home). Odin should detect it.
For your 2nd problem, here you can download the samsung usb driver pack, I also experienced that after installing kies then "an error occured blabla". Driver here: http://forum.xda-developers.com/showthread.php?p=11498043
Sent from my GT-S5360 using xda premium
No luck.
I just tried the new Odin and installed the new Samsung drivers.
It's still the same for both problems.
- can't detect phone in download mode but it can detect the phone in normal and recovery mode.
- samsung mobile USB modem error still persists
Your os must be corrupted!!! I
Sent from my GT-S5360 using xda premium
Try this...
Install drivers again...
*Dont connect ur usb now*
Now go to download.mode...
*now connect ur pc with ur phone via usb...*
.
Wait for a min...
Now press up...
...
Maybe this help
**rooting is new for me...and i am noob to root...**
AMAZING...
menewtoroot said:
Try this...
Install drivers again...
*Dont connect ur usb now*
Now go to download.mode...
*now connect ur pc with ur phone via usb...*
.
Wait for a min...
Now press up...
...
Maybe this help
**rooting is new for me...and i am noob to root...**
Click to expand...
Click to collapse
thanks for your help...your the best....now odin can detect my s6102.....KEN from PHILIPPINES
nnehk02 said:
thanks for your help...your the best....now odin can detect my s6102.....KEN from PHILIPPINES
Click to expand...
Click to collapse
well.. u can rather press it ...
anyways.. dn't thnk me.. thnk to the creator of odin... android... savie for packages... nd others... (sry if i 4gt someones name)
Hi....my phone get detected by odin wen it is switched off nd connected to p.c but not in download mode. I soft bricked my device nd really need to use odin...can any1 help...it only stops gettng detected in download mode...shows 0003 added nd ol wen switched off
sarnz said:
Hi....my phone get detected by odin wen it is switched off nd connected to p.c but not in download mode. I soft bricked my device nd really need to use odin...can any1 help...it only stops gettng detected in download mode...shows 0003 added nd ol wen switched off
Click to expand...
Click to collapse
try this - maybe work . reinstall your usb samsung driver - restart you pc/laptop - put you phone to download mod (dont continue yet) - if you on pc put you usb cable at rear port not front - then connect you usb to phone - wait 30 second - and continue you phone to download mod . if still not show - put out you usb cable from phone - off and back to download mod without usb cable - wait then connect you usb cable . im got same problem as you before - and try use another usb cable .
Sent from my GT-S5360
put your phone in download mode and connect to computer
open odin
remove battery from the phone
odin will now see the phone connected
reinsert battery
Can a member who can use Odin with their GT-S5360 connect the 5360 in "Download Mode" to their PC, open Windows Device Manager and copy / paste the Device Instance ID shown under:
+Universal Serial Bus controllers
...Composite Device
by right-clicking it, choose Properties, then Details?
On my PC, it is shown as 'Unkown Device' with the following Device Instance ID:
USB\VID_0000&PID_0000\5&2E64F456&0&1
Which is most likely not what it should be.
I want to know what it should be.
I have two Galaxy Y's (one soft-bricked, the other working fine) and both show the same ID.
BTW, I have tried every port on the back of my PC with four Samsung data cables and three third-party cables and I cannot get Windows or Odin to recognize the GT-S5360 in download mode (both phones).
I have downloaded and installed / uninstalled / rebooted, etc. with the following versions of Samsung USB Driver for Mobile Phones:
1.3.1500
1.4.8
1.5.9
1.5.15
1.5.23
1.5.33
I have downloaded but cannot install version:
1.5.49
MCC InstallWizard says it "could not" install the drivers but no error message or log is given.
And for some reason, the "have disk" method of installing the drivers doesn't work either.
My PC is running XP SP3 x86, offline.
I download all files to my working phone, and transfer them to the PC.
One last thing, can someone who has USB driver version 1.5.49 installed, open Windows Services and check to see if the Samsung Connection service has started and is running?
Phone not detected on ODIN
When i connect my Grand 2 to my laptop... it is connected as MPT and showing as detected on PC... when i start ODIN. it doesnt give the yellow/blue light. The phone is also not detected on KIES (both versions). but i can copy files through windows explorer.
I have galaxy S2 and Note 3. they are both detected on odin. But Grand 2 is not.
I have installed usb drivers, reinstalled adb drivers on device manager, changed the cable. Nothing worked for grand 2.
Please help!!
Anser117 said:
When i connect my Grand 2 to my laptop... it is connected as MPT and showing as detected on PC... when i start ODIN. it doesnt give the yellow/blue light. The phone is also not detected on KIES (both versions). but i can copy files through windows explorer.
I have galaxy S2 and Note 3. they are both detected on odin. But Grand 2 is not.
I have installed usb drivers, reinstalled adb drivers on device manager, changed the cable. Nothing worked for grand 2.
Please help!!
Click to expand...
Click to collapse
m having same problem as you.
did you get any solution?
Simple solution.
kilogrip said:
Can a member who can use Odin with their GT-S5360 connect the 5360 in "Download Mode" to their PC, open Windows Device Manager and copy / paste the Device Instance ID shown under:
+Universal Serial Bus controllers
...Composite Device
by right-clicking it, choose Properties, then Details?
On my PC, it is shown as 'Unkown Device' with the following Device Instance ID:
USB\VID_0000&PID_0000\5&2E64F456&0&1
Which is most likely not what it should be.
I want to know what it should be.
I have two Galaxy Y's (one soft-bricked, the other working fine) and both show the same ID.
BTW, I have tried every port on the back of my PC with four Samsung data cables and three third-party cables and I cannot get Windows or Odin to recognize the GT-S5360 in download mode (both phones).
I have downloaded and installed / uninstalled / rebooted, etc. with the following versions of Samsung USB Driver for Mobile Phones:
1.3.1500
1.4.8
1.5.9
1.5.15
1.5.23
1.5.33
I have downloaded but cannot install version:
1.5.49
MCC InstallWizard says it "could not" install the drivers but no error message or log is given.
And for some reason, the "have disk" method of installing the drivers doesn't work either.
My PC is running XP SP3 x86, offline.
I download all files to my working phone, and transfer them to the PC.
One last thing, can someone who has USB driver version 1.5.49 installed, open Windows Services and check to see if the Samsung Connection service has started and is running?
Click to expand...
Click to collapse
Just reinstall your operating system of pc and install the drivers again. Everything will be fine.
Else try connecting it to another computer. It will WORK for 100^(1000000)%.
Hope it was helpful.
You should install full driver for SGY
I have tried to upgrade my galaxy y with cyanogen Android 4.4, when I tried to install using recovery mode my phone suddenly switched off.. And restarted. But struck in logo so I tried to reflash it but recovery mode was not showing it just struck at logo, & I even tried odin mode after several attempts it is opening download mode just once in a 20-30times, & cannot detect my phone in odin mode.. Do u guys have any suggestions??
I have tried to upgrade my galaxy y with cyanogen Android 4.4, when I tried to install using recovery mode my phone suddenly switched off.. And restarted. But struck in logo so I tried to reflash it but recovery mode was not showing it just struck at logo, & I even tried odin mode after several attempts it is opening download mode just once in a 20-30times, & cannot detect my phone in odin mode.. Do u guys have any suggestions??
yunos interface
my samsung grand 2 has "yun os interface" its not detecting by odin please help me

[Q] Cannot install driver for Download Mode in Win7

Hello everyone
I am trying to use Odin to flash recovery but when I connect S4 which is in download mode to the Win7 PC, Win7 says it fails to install the samsung mobile usb cdc composite device and a yellow exclaimation icon appeared on this driver in device manager.
Because of this problem, Odin cannot find S4
I've re-installed Kies and samsung usb drivers for mobile phones, and even tried on another two pcs(one win7, one xp), all got the same problem...please help
Albert

[Q] Nexus 4 not getting detected in fastboot and normal mode

Hi
I have problem with my nexus 4. Whenever I'm trying to connect to USB device is not getting detected in mode as well as fastboot mode.
I have tried it on win7, xp and Mac. adb and other drivers are up to date. I'm using android 4.4 KitKat baseband KRT16S factory image. Device is unlocked and rooted with clockworkmod recovery. I tried flashing different versions of recovery using ROM manager. Tried switching USB storage options 'media device MTP' and 'camera PTP'. I have also tried to reinstall drivers on Windows but no luck ( Mac doesn't require drivers ). Used different USB cables. Tried enabling/disable USB debugging. Device is not getting detected in any way.
my other device, which is nexus 4 and with same software, it works fine. Seems something wrong with my device only.
Please suggest solution. Thanks !
Reinstall USB driver once phone is in recovery mode.
Sent from my Nexus 4, while driving in my Evo9.
Sfkn2 said:
Reinstall USB driver once phone is in recovery mode.
Sent from my Nexus 4, while driving in my Evo9.
Click to expand...
Click to collapse
no its not working
Have you downloaded the latest official driver with the google adt bundle?
I also had to download the latest driver and remove the the device from Windows device manager and completely reinstall the device.

Help, mtk vcom usb error code 10

Can anyone help me on my problem, k4 note not detected on my laptop.. when i insert usb to laptop, k4 note not detected and when i see device manager>usb vcom properties says cannot start error code 10? Pls help me, i want to flash stock on sp flash
edarick said:
Can anyone help me on my problem, k4 note not detected on my laptop.. when i insert usb to laptop, k4 note not detected and when i see device manager>usb vcom properties says cannot start error code 10? Pls help me, i want to flash stock on sp flash
Click to expand...
Click to collapse
Disable driver signature reinforcement if you are on windows 8 or later versions.
Reboot to safe mode.. uninstall all drivers related to the phone.
Reboot to normal mode, install lenovo usb drivers(google it) and you can now install the firmware
akurativinod said:
Disable driver signature reinforcement if you are on windows 8 or later versions.
Reboot to safe mode.. uninstall all drivers related to the phone.
Reboot to normal mode, install lenovo usb drivers(google it) and you can now install the firmware
Click to expand...
Click to collapse
So you got this error too...
My device now detected in adb..but mtp is giving an error..(error code 10) so i cant flash twrp recovery..?
edarick said:
So you got this error too...
My device now detected in adb..but mtp is giving an error..(error code 10) so i cant flash twrp recovery..?
Click to expand...
Click to collapse
Update MTP usb device driver in Windows Device Danager.....
akurativinod said:
Update MTP usb device driver in Windows Device Danager.....
Click to expand...
Click to collapse
i update it but not installing..says failed
i dont know why...but this my device has no rom or stock installed..and recovery gone after i flashing another recovery yesterday
edarick said:
i update it but not installing..says failed
i dont know why...but this my device has no rom or stock installed..and recovery gone after i flashing another recovery yesterday
Click to expand...
Click to collapse
Try it connecting in different usb ports..
In update driver window, there is small check box next to Show compatible driver software for this device. In the list of devices, select MTP device or MTP usb device. Install it and try again..
akurativinod said:
Try it connecting in different usb ports..
In update driver window, there is small check box next to Show compatible driver software for this device. In the list of devices, select MTP device or MTP usb device. Install it and try again..
Click to expand...
Click to collapse
Its ok now thanks for replying... Now my brother device that i say my own is now on stock...
:victory:

Categories

Resources