Database Users

Fastboot> Recovery dosen't find *.img file on SD card

Hi Guys!
I am trying to root my nexus, unlocked it, installed the right usb drivers, I can see the phone and everything looks right.
Downloaded Superboot for ERE27 with himem enabled and ran this. no problem.
I put the img file on the SD card and when I boot the phone in Fastboot / Recovery it does not find and img files on the SD card.
I tried 2 different cards and also different img files.
When I do this I get first the message no images found than I see the droid with a triangle and a ! in it. - Have to pull the battery.
Ideas anyone?
Thanks

What are you trying to do?
1) you had to unlock the bootloader which enables you to install a new recovery image (which is needed to allow you to install new roms)
2) you had to apply the recovery image Amon RA via a command prompt and a batch file if you use Windows. The phone's USB connection needs to be in development mode and once the batch file executes and successfully finishes you need to reboot the phone.
3) you restart the phone into bootloader mode, use the volume rocker to select the recovery console. If you end up with an andriod and exclamation symbol the Amon RA recovery file was not installed.
4) the new recovery console allows you to clean the SD card. Install roms from the SD card and some other commands. The Roms for the Andriod are in ZIP format and do not need to be unziped. In other words all you need to copy to the SD card is the full ZIP file (approx 75MB) and install that directly from the recovery console.
If your android stays in the booting sequence which is shown as the X with flying little pixels, it's most likely because you did not wipe the device clean first. That item is in the recovery console as well.
Hope this helps. I am just as new to this as you are.

You didn't unzip them did you?

You're trying to root with superboot. Great, but the recovery is not capable of flashing .img files, only .zip updates and roms and such. .img files have to be flashed using fastboot, not recovery, and are flashed from the connected computer.
If you read the superboot instructions from wherever you got the file, you'll see that you have to put the .img in the same directory ON YOUR COMPUTER as fastboot, connect via USB, boot the phone into fastboot, then enter the appropriate command line on the computer to flash the file.
If you've done that, then you are officially DONE with the rooting process.
Also, make damn sure that the superboot version matches the software version on your phone. They're both ERE27, right?
I'm not sure what anosis's post is talking about, but that looks more like the process for installing a custom rom (ie cyanogenmod), than rooting.
To root your phone, you DO NOT need Amon-RA's recovery. You only need that if you want to install custom roms, etc. It wont hurt to have it, as it includes many more functions than the stock recovery, but just to root, you don't need it.
Summary:
If you flashed the superboot.img from your computer via fastboot, your phone is rooted. Done.
You don't need to do anything in the recovery at all for rooting. Only for installing update.zips and custom rom.zips.

Hey, So I have been scouring the forums trying to find some answers about this and you seem to be the closet to my situation. Here is what I did:
So I was running a CM9 Aplha, reverted back to stock 2.3.6 [1ada25375426.signed-soju-ota-189904.1ada2537]) so that I could then apply ICS update [VQ8PQk_V]) which I sucessfully did. This was about a month ago and it was all going well.
Then yesterday I wanted to upgrade to 4.0.4 [hR7QFEtn] so I did and superuser wasn't working properly but then I reinstalled it and got it to work. However I got to the point where everything was working fine EXCEPT for the Google Play store kept on force closing. I spent hours trying last night and could not find a solution.
I tried restoring the previous ICS update that I had and it worked, and then I tried updating again. Also side: My clockwork was on the fritz lately so I was using Zedowmaxs force into clockwork recovery image [fastboot boot recovery3101.img] to force it in sometimes.
Anyway bottom line here is where my REAL ISSUE begins. I decided just to wipe everything and start anew. I factory reset/ wiped properly [cache partition and davliche cache] and then locked my bootloader again. Then tried rebooting. Got stuck on Google screen. Then I unlocked my bootloader again. Tried again, same issue.
So, here is where I am at. Cannot get into recovery from fastboot, takes me back to fastboot. AND, everything is wiped because I locked/unlocked my bootloader. All I can do is adb commands.
I don't know what to do from here and there is a lot of things going on. If you could help that would be great!? What I am going to try next is to flash some recovery on, but I don't know which one/ try to mount a file to my sd card from adb commands.

Daboxk said:
Hey, So I have been scouring the forums trying to find some answers about this and you seem to be the closet to my situation. Here is what I did:
So I was running a CM9 Aplha, reverted back to stock 2.3.6 [1ada25375426.signed-soju-ota-189904.1ada2537]) so that I could then apply ICS update [VQ8PQk_V]) which I sucessfully did. This was about a month ago and it was all going well.
Then yesterday I wanted to upgrade to 4.0.4 [hR7QFEtn] so I did and superuser wasn't working properly but then I reinstalled it and got it to work. However I got to the point where everything was working fine EXCEPT for the Google Play store kept on force closing. I spent hours trying last night and could not find a solution.
I tried restoring the previous ICS update that I had and it worked, and then I tried updating again. Also side: My clockwork was on the fritz lately so I was using Zedowmaxs force into clockwork recovery image [fastboot boot recovery3101.img] to force it in sometimes.
Anyway bottom line here is where my REAL ISSUE begins. I decided just to wipe everything and start anew. I factory reset/ wiped properly [cache partition and davliche cache] and then locked my bootloader again. Then tried rebooting. Got stuck on Google screen. Then I unlocked my bootloader again. Tried again, same issue.
So, here is where I am at. Cannot get into recovery from fastboot, takes me back to fastboot. AND, everything is wiped because I locked/unlocked my bootloader. All I can do is adb commands.
I don't know what to do from here and there is a lot of things going on. If you could help that would be great!? What I am going to try next is to flash some recovery on, but I don't know which one/ try to mount a file to my sd card from adb commands.
Click to expand...
Click to collapse
It looks like the time when you were locking-unlocking the bootloader, you messed up the recovery. Since your phone can get into bootloader menu, I think you can get out of this issue.
Here is what I would do.
1. Unlock the bootloader.
2. flash clockworkmod recovery using fastboot USB.
3. Download recovery-RA-passion-v2.2.1.img, put it in C:\fastboot\
4. Shut down your phone. Then start your Nexus One in Fastboot mode by holding down the Trackball and press the Power button.
5. Connect your phone to your computer. Open a Command Prompt (Start -> All Programs -> Accessories -> Command Prompt), and run the following commands:
cd C:\fastboot
fastboot devices
fastboot flash recovery recovery-RA-passion-v2.2.1.img
now see if you can get into recovery. If you can, just flash a custom rom using install zip from sd card option in the recovery

I didn't read all the replies but fastboot reads from your PC's disk not the sdcard, unless you are running it through shell or something?

Clockwork Recovery is Installed, Won't Load, missing recovery partition.

I'm putting this in General because this is my first time I've actually posted on XDA and I hope someone will move it to wherever it needs to be.
I've rooted my Nexus S a long time back when it was new, originally had some trouble with fastboot hanging on "waiting for device" I want to say trying PDANet fixed my problem then. I'm not foreign to the flashing/rooting process. And I know this is a long post but If you can please read it all it would be appreciated.
My Story:
>ICS was released and while Google said Nexus S would get an official update I saw some on XDA that were promising ports.
>I downloaded We Scream for Ice Cream Beta 9 and installed through Rom Manager
>About a month later I'm fed up with all the force closes and missing features the thread didn't inform me on and went to find another ICS Port.
>Downloaded and about to install through Rom Manager I'm informed that I need Clockwork (strange because I already have it) so within Rom Manager I flashed a new one.
>Install via SD Card and my phone reboots and then instead of loading recovery and doing its stuff I wait at the Bootloader screen. I try entering recovery myself and my phone restarts and again I'm at the bootloader screen.
>At the very bottom of the screen in gray lettering it says Fastboot FAILEDcommand
(As of now it displays the Google Logo with the unlock icon and hangs)
>At this point I decide I' going to flash over clockworkmod myself via adb. This should be the magic formula: via addictive tips (new user, can't include hyperlinks)
Code:
adb push c:\flash_image /sdcard/
adb push c:\recovery.img /sdcard/
adb shell
su
mount -o remount, rw /system
cp /sdcard/flash_image /system/bin
cd /system/bin
chmod 777 flash_image
flash_image recovery /sdcard/recovery.img
>Adb gives me an error similar to won't link after the mount/remount command. Also trying to cp the flash image to bin fails to work.
>I boot my phone, open Total Commander and try to copy the flash image myself to the bin folder in my root and it fails
(As of now I get error: device not found)
Then i think alright, maybe it's my drivers. I tried several different drivers from different tutorials because perhaps they are different in some slight way. >Whenever I try a new driver I can pick "adb Composite" "bootloader" or vanilla "adb interface".
>My device appears as "Android Phone" as the first entry in the Device Manager and the icon is a monitor with a small PCB chip in the corner.
>When the divers are completely uninstalled it appears in Other Devices with a yellow exclamation point.
>My understanding is that while it will automatiaclly grab the driver for USB mode, I have to force it to install the bootloader driver for when my phone is in the bootloader screen.
>And USB Debugging has been checked for everything I've done.
>Now i try to use PDANet, first I uninstall the drivers and install PDANet. Message appears saying there is already an Android Driver installed, I choose reinstall, select Samsung, pop says are you sure you want this driver, publisher cannot be confirmed? I click yes, I beleive that happens twice, it installs and then runs. It installed the vanilla "adb interface" driver.
(This is where I'm at now, the Fastboot FAILEDcommand is also gone.)
So now I'm like well there's fastboot, let me see if it recognizes it.
>Fastboot devices: nothing appears
>fastboot flash recovery recovery.img : it hangs on waiting for device.
>Same goes for other commands like OEM unlock.
All the while ROm Manager insists I have clockwork recovery verison 5.x - only it wont load and none of my PC options are recognizing the phone. So I can't flash over a different recovery image, and there;s nothing under alternate recovery in Rom Manager.
And the strangest of them all which may be Rom Manager's problem is that Super User FCs as soon as I try running it. Rom Manager states Super User gives it power at the end of the clockwork recovery flash, however, still says it's successful.
Before this entire thing my phone tried to OTA update to 2.6.7 for Google Wallet and where it would normally respond I got the Android Guy with a box and a yellow exclamation. This is also what I got when I first had some problems rooting months back before I flashed over images and roms. I figured it wouldn't update because it needed the stock recovery image and wasn't compatible updating with clockwork mod (however i think my phone has updated before with this method.)
I wouldn't mind rolling back to my stock deodexed version of Gingerbread at this point because the ROM I have now for ICS NFC and Bluetooth wont work among a slew of problems. And NFC was the major update in 2.6.7 in regards of tap to share and Wallet.
So I either need ADB and Fastboot to recognize my device to try reflashing clockwork and an Entirely new ROM remotely (if that's possible) or get clockwork mod on my phone to open.

More Details
Also when I load the recovery image and it loops back into the bootloader I get the message up top saying I don't have a boot image or recovery image. yet my phone still boots fine.
I really want my phone to work %100 again, can anyone help me?

I didn't read all you wrote, but if you're having trouble getting adb or fastbook to work correctly just use ROM Manager. Even if it says you have it installed, do it a few times. You can also go into settings and check off the format or erase recovery option before flashing.
It will eventually work. Just keep trying it.

Thanks
I know I've read things where flashing several times gets it to work. But I'm wondering if because SuperUser force closes without opening it's unable to give RomManager the permissions needed to complete the flash.
I've tried a few times ever once in a while. Still waiting, but adb will recognize my phone on my guest login but still no fastboot.

What rom you on? Have you tried going into app manager and then clearing data for superuser? Try that and then reflash the recovery a few times from rom manager.
If you're using CM9 alpha 11 or any of the builds by Koush, and superuser FC's from fresh flash. Clear the data, use root explorer or another app that has root access (it will prompt you for root access even if superuser UI won't open) then you can go into /system/app/ and delete or rename superuser.apk.
Once that is done, get the latest one from the market. Soon as it installs, clear the old data from the previous one by using app manager again. Then your superuser app should be working normally.

What's your phone model? (I guess it's I9020T)
When you boot into bootloader, does the fastboot devices command see the device properly?

You should use fastboot to flash your recovery. You probably have driver issues. Check the rooting guide at nexusshacks.com.
Sent from my Nexus S using XDA App

Fixed
Thanks to everyone and heir suggestions.
Eventually I downloaded another set of Fastboot and ADB registered with my phone and I was able to flash a new ClockworkRecoveryMod.
My only explanation is that the two tools where in the same folder this time - that was the only part that was different.
However ROM manager will still tell me I do not have Clockwork on my phone and when it 'flashed' it over it actually breaks my recovery partition all over again.
Thank god for ADB and Fastboot.

[Q] Super Ultra Brick (WITH VIDEO)

UPDATE 3: I've got it back to as stock as I can get it. I think I'm going to just return it and get a new one. Thank you all for your help.
UPDATE 2: As of right now, I'd like to completely remove FFF from the device, but I can only use fastboot to do it. I have absolutely no adb access. Is there a way?
UPDATE: Here is a video showing what is happening to my KF: http://www.youtube.com/watch?v=MH6oUg1NmC0
I hate to start another thread about boot loops/bricking, but I'm not sure what's going on with my fire.
I had CM7 installed successfully since the day after Christmas. This morning I woke up and my Fire was being really sluggish, so I rebooted it (I did not select reboot into recovery).
After it powered on, I was stuck at the CM7 boot screen (with the skateboarding android). I let it sit, but no luck. I went into TWRP to try and restore the backup I made of the stock rom. It looked successful, but when I rebooted I was stuck at the Kindle Fire boot screen.
Next, I tried wiping the device and re-installing CM7, but I received an error (something along the lines of E:Error unable to find /tmp/sideload/blahblah).
So I again restored my backup of the stock rom. Now when I power on my Fire I see the yellow triangle, then the kindle fire logo, yellow triangle, kindle fire logo, and it just keeps repeating. The problem is I am unable to connect to adb because the PC only seems to recognize the adb device for a few seconds after the yellow triangle, which does not give me enough time to fix the problem.
Any ideas?

looks like you'r out of battery ! the kf is rebooting !
would take the wall charger and charge for an hour
it's not possible to charge with the computer - it lasts forever
then it should respond in a stable state

b63 said:
looks like you'r out of battery ! the kf is rebooting !
would take the wall charger and charge for an hour
it's not possible to charge with the computer - it lasts forever
then it should respond in a stable state
Click to expand...
Click to collapse
Recovery shows my battery level to be at 53%. I've got it on the charger now, but I have a feeling there is something else going on.
Also, I am unable to mount my Fire's SD to my computer in recovery. It looks like it is working, but my computer never acknowledges it.

maybe because your last installation failed
nevertheless i would try to charge and then go in twrp and retry the installation
if that's not sucessful i would try to switch the kf to fastboot and copy a new rom. stock or prerooted stock or cm7 - whatever you like
in twrp there is a point "mount" - sdcard - then you should get it from computer

b63 said:
maybe because your last installation failed
nevertheless i would try to charge and then go in twrp and retry the installation
if that's not sucessful i would try to switch the kf to fastboot and copy a new rom. stock or prerooted stock or cm7 - whatever you like
in twrp there is a point "mount" - sdcard - then you should get it from computer
Click to expand...
Click to collapse
Thanks for the reply. Is adb required to get into fastboot? The problem is that I am unable to get into adb because my computer only sees the Fire for about 1 second. When I go into device manager, I don't see it at all.
EDIT: Yeah, I see the mount in TWRP, but it does not do anything when I select it.

Hi Im a beginner but Id like to try to help :
In case you become desperate ignore twrp's battery display and try wall charger.
Anorher idea id have is to shut down throughr twrp and start up then instead of rebooting.

ADB is needed to get into fastboot, but it's quick. If you use KFU, you can probably hit the option during the couple seconds you have available. I would say your best bet, however, is booting into twrp, doing a full wipe of system, cache, davlik cache, and maybe data, and then trying the rom install again.

skourg3 said:
ADB is needed to get into fastboot, but it's quick. If you use KFU, you can probably hit the option during the couple seconds you have available. I would say your best bet, however, is booting into twrp, doing a full wipe of system, cache, davlik cache, and maybe data, and then trying the rom install again.
Click to expand...
Click to collapse
So this time it looks like the installation worked in TWRP, but after reboot now I'm stuck at the CM7 boot screen. This is at least some progress, so when I get home I'll see what I can do.
Sent via my internet connected mobile cellular telephone.

Well, the battery is definitely not the issue. I've been trying to get fastboot, but the problem is the fact that I can not get adb. Has anyone else had issues with getting adb? I've already tried to install the drivers, and that doesn't work.
EDIT: I've tried issuing "adb devices" from the command prompt repeatedly as soon as I hear the ding until it disconnects a second later, but still I have had no luck.
Also, I found this thread in which someone else appears to have had a similar issue to mine.
[Q] New kind of unfixable Super Brick?

at the moment adb is useless - you should try to get the device in fastboot mode - correctly recognised from your computer - then work with fastboot commands - if you don't get that then your next opinion is buying or making a factory cable - but we should try to avoid that ...

b63 said:
at the moment adb is useless - you should try to get the device in fastboot mode - correctly recognised from your computer - then work with fastboot commands - if you don't get that then your next opinion is buying or making a factory cable - but we should try to avoid that ...
Click to expand...
Click to collapse
I can not seem to get fastboot to work either. Does fastboot rely on adb? Or do you just run the .exe file? I tried to run it, and nothing happened.

fastboot has nothing to do with adb - calling just the exe does nothing -
you have to issue fastboot commands
ok have reread the whole thread and have some ideas:
your currently stuck at the cm7 boot screen ?
have you used the "stock rom version" to wipe data and cache partitions as described here ?
http://forum.xda-developers.com/showthread.php?t=1390773
perhaps it will help to wipe data/cache with twrp ...

b63 said:
fastboot has nothing to do with adb - calling just the exe does nothing -
you have to issue fastboot commands
ok have reread the whole thread and have some ideas:
your currently stuck at the cm7 boot screen ?
have you used the "stock rom version" to wipe data and cache partitions as described here ?
http://forum.xda-developers.com/showthread.php?t=1390773
perhaps it will help to wipe data/cache with twrp ...
Click to expand...
Click to collapse
Just wanted to let you know I updated the OP with a video showing what is happening to my KF.
Haven't tried that particular rom yet, but I have wiped data and cache and attempted to re-install CM7.

great idea with the video !!!

b63 said:
fastboot has nothing to do with adb - calling just the exe does nothing -
you have to issue fastboot commands
ok have reread the whole thread and have some ideas:
your currently stuck at the cm7 boot screen ?
have you used the "stock rom version" to wipe data and cache partitions as described here ?
http://forum.xda-developers.com/showthread.php?t=1390773
perhaps it will help to wipe data/cache with twrp ...
Click to expand...
Click to collapse
OK, so I restored my original rooted kindle rom, but I still can't get into fastboot because of the problem I showed in the video. It is doing exactly the same thing, just instead of the CM7 boot screen, it is the Kindle Fire boot screen.
Is is possible to get into fastboot without the computer? Can anyone think of a reason why I would not be able to mount my device in TWRP?

I just want to understand something about fastboot... can you upload and flash roms with it? Or can you only get TWRP / FFF with it? I ask because I already have them, and I still can't do anything (mount from inside TWRP doesn't work). Thanks!
Sent via my internet connected mobile cellular telephone.

with fastboot you can install the newest fff and if you need twrp
but with the newest fff you can issue ""fastboot oem format"
see here:
http://forum.xda-developers.com/showthread.php?t=1369405
that should solve every issue ...

b63 said:
with fastboot you can install the newest fff and if you need twrp
but with the newest fff you can issue ""fastboot oem format"
see here:
http://forum.xda-developers.com/showthread.php?t=1369405
that should solve every issue ...
Click to expand...
Click to collapse
Cool. I just ordered one of SkOrPn's cables, so once I get it I'll be sure to give an update. Thanks for all the help so far!

The cable isn't need when you have the FFF bootloader, in fact, when your computer does see the device for the short amount of time shown in the video, fastboot is active. It's a feature of FFF. Fastboot is a command line tool like adb but is used for different things. It comes in Android sdk which if you have that, you should update the tools packages in the Android manager and it will update adb and fastboot. It looks like something is not working correctly in twrp and the OS is failing to load. I'm not sure you need to oem format tho.....
At some point you had to have used fastboot to install twrp and/or FFF.... Unless you used adb dd? :what:
Anyway, I can help more but it's late where I am, need to sleep. Was going to write more but... Need sleep lol. I'll post some questions and check back tomorrow.
Have you used adb before? Do you know if platform-tools is in your environment variables PATH? In other words, can you open up cmd and type adb or do you need to "cd" to platform-tools then use adb? If you know where adb is located? If so, is a file called fastboot in there? (Maby called fastboot.exe)

foxdog66 said:
The cable isn't need when you have the FFF bootloader, in fact, when your computer does see the device for the short amount of time shown in the video, fastboot is active. It's a feature of FFF. Fastboot is a command line tool like adb but is used for different things. It comes in Android sdk which if you have that, you should update the tools packages in the Android manager and it will update adb and fastboot. It looks like something is not working correctly in twrp and the OS is failing to load. I'm not sure you need to oem format tho.....
At some point you had to have used fastboot to install twrp and/or FFF.... Unless you used adb dd? :what:
Anyway, I can help more but it's late where I am, need to sleep. Was going to write more but... Need sleep lol. I'll post some questions and check back tomorrow.
Have you used adb before? Do you know if platform-tools is in your environment variables PATH? In other words, can you open up cmd and type adb or do you need to "cd" to platform-tools then use adb? If you know where adb is located? If so, is a file called fastboot in there? (Maby called fastboot.exe)
Click to expand...
Click to collapse
Yep, I've used adb successfully, and it is set up as an environmental variable. I actually installed FFF and TWRP with the KFU. Problem is I think something else is botched; perhaps it is TWRP itself, since I am unable to mount from TWRP. I'll try again when I get home.
Sent via my internet connected mobile cellular telephone.

[Q] N4 Soft-Bricked - NRT Not Helping

So I wanted to try Cataclysm, but was having issues switching to it from PA. It always kept booting into PA so I decided to do a full wipe. I did a full app backup and a nandroid backup using NRT. I first tried a regular factory reset, but eventually decided to wipe everything, even /system (a mistake, I now see). After I did that, I tried using NRT to flash stock + unroot. The NRT script gets through everything fine until it gets to the terminal part and says there's no 'boot.sig', 'recovery.sig', or 'system.sig'. It also fails the baseband version check. Don't know if it's even relevant, but it says something failed so I thought I'd include it. After that it tells me it will look like it's boot looping, but it just sticks in fastboot mode. If I wait 20 minutes nothing happens. If I push START it hangs on the Google screen but never gets any further, even 30 minutes later. I've tried pushing a custom zip and install in in TWRP. I've tried flashing a new kernel. Whatever I try I cannot seem to get any further than the boot screen. At this point I'd be happy with stock. I just want my phone back. What do I do?

I'm assuming NRT is a toolkit?
From here on, don't use a toolkit if you know how things work. Manual is the way to go.
Boot into fastboot, choose recovery, go into TWRP, advanced, ADB SIDELOAD.
Now use command prompt or terminal on your computer (depending on your OS), navigate to where you installed your toolkit, there should be a .exe or .sh called adb and fastboot.
Download your preferred rom and gapps, transfer it to this folder.
Now simply do a command "adb sideload *zipname*.zip " and it should transfer and flash your phone.
Don't flash a kernel yet, wait till you finish your first boot, then only you flash it.

I tried exactly what you said to flash the stock image. The terminal said it had transferred 100%, but TWRP said the sideload failed.

Hamalot said:
I tried exactly what you said to flash the stock image. The terminal said it had transferred 100%, but TWRP said the sideload failed.
Click to expand...
Click to collapse
that's because you can't flash the stock image like that.
Download CM and try.

It worked! Thank you so much!

Stuck in Sideload, Is it Bricked?

Nexus 7 2012 32GB wifi, Stock, Unlocked, Rooted, TWRP.
I am new to adb, but have used Wug's toolkit in the past. I attempted to sideload the Lollipop OTA zip through through Wug's toolkit. Everything was going well, but for some reason I got an error that stated that there was not enough room to install the update. I figured that was the end of that, but when I tried to reboot, it went straight to the stock recovery, and will not boot past that. Did some poking around in the toolkit, and found I didn't have fastboot anymore. (Also, I did not make a backup, stupid stupid, because I had recently wiped everything, and have the factory images downloaded). So, with the toolkit not getting me anywhere, I decided to try getting back to running through ADB. Read some tutorials, downloaded SDK, get that all set up so I can see where I am at. Command window, Type "adb devices", get "serial # sideload. Tried "adb reboot recovery", got no devices.
Probably should have just stopped but, since I knew I had USB debugging on, and all the newest drivers installed (just ran the toolkit) I figured why not try to sideload from here? Not enough Space again. Tried sideloading OTA 4.4.4(KTU84P) which is what I was running up to this point, and get unexpected contents error in "system/app/basicdreams.apk" "status 7".
Top of screen says:
Android system recovery (3e)
KTU84P
Long story short; Stuck in stock recovery, No Fastboot, Apply update from ADB works, but haven't anything to finish installing.
Thanks for any help, you guys are awesome, and give me way too much info for my own good, obviously.

Got back to working at this. WUG's toolkit fixed it. Just like every answer, in every thread with similar problems said it would. Using the flash stock +unroot and the soft brick/bootloop option. Since i was on Bootloader version 4.23, I flashed 5.0. Not sure what was different this time, as I tried the same process last night.
Anyway, anyone having the same troubles should give that a try.