Database Users

[Q] Problem rooting SM-N9005

For two days i have been struggling to root my new Orange Romania N9005.
First of all I downloaded CF Auto Root and Odin 3.09. Followed the steps exactly (i'm not new to rooting) ,Uninstalled Kies and downloaded the latest drivers only, and every single time I try to root it Odin gives the following error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the screen of the note 3 the following error in red : SECURE CHECK FAIL : recovery
I have since tried every single version of ODIN , tried flashing pre-rooted roms only to get my device soft bricked(Fails right at the very end, and then I restored via kies )
,I have tried to change usb ports to no avail, even tried to root it on 4 different laptops.Tried with different cables, with usb debugging on and off, NOTHING WORKS!!!
Please help me I am thinking of setting it on fire!!!

Try install Kies and try again...
/CK

tried with old kies and kies 3 as well.Also tried older drivers.
Do i have a locked BootLoader?This shouldnt be the case as it is an n9005.
Any way to check if bootloader is locked and if so any way to unlock it for the international version?
Thanks!

No one?
Doesn't any one know how to help?Don't know where else to ask.

NavDragan said:
Doesn't any one know how to help?Don't know where else to ask.
Click to expand...
Click to collapse
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005

NavDragan said:
For two days i have been struggling to root my new Orange Romania N9005.
First of all I downloaded CF Auto Root and Odin 3.09. Followed the steps exactly (i'm not new to rooting) ,Uninstalled Kies and downloaded the latest drivers only, and every single time I try to root it Odin gives the following error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the screen of the note 3 the following error in red : SECURE CHECK FAIL : recovery
I have since tried every single version of ODIN , tried flashing pre-rooted roms only to get my device soft bricked(Fails right at the very end, and then I restored via kies )
,I have tried to change usb ports to no avail, even tried to root it on 4 different laptops.Tried with different cables, with usb debugging on and off, NOTHING WORKS!!!
Please help me I am thinking of setting it on fire!!!
Click to expand...
Click to collapse
I had the same issue while rooting my Galaxy S4,tried on every other laptop,different ports,cables and more but then I realized I was using the wrong file.
Yes,the international version comes with Bootloader unlocked so your bootloader is fine.Are you able to boot your phone into Download mode?I am sure u cant boot into Recovery mode,can you?
First go back and check your phone's model no and use the proper file and try again!I will help you,dont worry!

I deactivated the reactivation lock but still the same problem.I have Downloaded the CF-Auto-Root-hlte-hltexx-smn9005.tar file several times same thing every time.My last chance is doing a full wipe of the system and then trying again.I hope orange Romania CSC does't have some sort of security block.
Frustrating thing is the phone is fully functional so i cannot ask for a replacement.And even after the dozens of failed flash attempts it still reads 0x0.
YES!!!Finally.A full wipe did it.!Thank you for your interest in helping me.

iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
Thanks that helped! Unlike the OP didnt have to wipe phone.

Thank youu
nsnarayan10 said:
I had the same issue while rooting my Galaxy S4,tried on every other laptop,different ports,cables and more but then I realized I was using the wrong file.
Yes,the international version comes with Bootloader unlocked so your bootloader is fine.Are you able to boot your phone into Download mode?I am sure u cant boot into Recovery mode,can you?
First go back and check your phone's model no and use the proper file and try again!I will help you,dont worry!
Click to expand...
Click to collapse
THank you soo much after following exact instruction that you gave i finally got it rooted!! Thank you!!

nsnarayan10 said:
I had the same issue while rooting my Galaxy S4,tried on every other laptop,different ports,cables and more but then I realized I was using the wrong file.
Yes,the international version comes with Bootloader unlocked so your bootloader is fine.Are you able to boot your phone into Download mode?I am sure u cant boot into Recovery mode,can you?
First go back and check your phone's model no and use the proper file and try again!I will help you,dont worry!
Click to expand...
Click to collapse
thanks for bringing this up.
so where do you get the proper file?
i have the same problem, and a full wi[e has not helped here..
kindly give the correct link.
thanks once again

Before you wanna flash. Don't forget to uncheck reactivation lock, put off your external sd card. And look carefully for your modem and radio. Don't switch with the another kernel before official launch comes.
Sent from my CruelB Note 3 SM-N9005 Snapdragon 800 using Tapatalk

Cruel B said:
Before you wanna flash. Don't forget to uncheck reactivation lock, put off your external sd card. And look carefully for your modem and radio. Don't switch with the another kernel before official launch comes.
Sent from my CruelB Note 3 SM-N9005 Snapdragon 800 using Tapatalk
Click to expand...
Click to collapse
h guys!
i asked for 'the propper files' link?...
my phone now entres boot-loop when i restart it. any help?
...after several loops, it finally completes start up. by now i'd have left it alone for about 15 mins!
tanks, in advance..
---------- Post added at 03:22 PM ---------- Previous post was at 02:51 PM ----------
aidelnma said:
THank you soo much after following exact instruction that you gave i finally got it rooted!! Thank you!!
Click to expand...
Click to collapse
h guys!
i asked for 'the propper files' link?...
my phone now entres boot-loop when i restart it. any help?
...after several loops, it finally completes start up. by now i'd have left it alone for about 15 mins!
tanks, in advance..

THANK YOU!
Yes, the reactivation lock did it for me too. I was stuck at exactly the same point and couldn't think of why, and this didn't even come to mind. In fact, I forgot that I even did that, but it worked. !!!

nsnarayan10 said:
I will help you,dont worry!
Click to expand...
Click to collapse
Help please, I have a (Note 3) SM-N900V on JSS15J.N900VVRUBMJE.
I bought it on Jan 12th ish, and took the firmware update as soon as I saw it because of some reading I had done.... shouldn't have done that I guess.
I am still totally unable to root this thing, Kingo, Odin v3.0.9. I am willing to do w/e (go back to older firmware even if possible)
I know there are no guarantees in this attempt, and would not hold you to anything, I have rooted every other android I have had and am very familiar with the process, any help you can offer would be greatly appreciated 
https://plus.google.com/u/0/+JoelJrMcCracken/

This has helped. Thanks a lot.
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
This helped a lot. Problem fixed.
regards

iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
Thanks. 1.5 years later and this helped me too!

iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
U sir are a life saver!
Thanks!

iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
Thank you, you saved me from pulling my hair out :highfive:

Hello to all.
I have a Tab 3 (that was given to me)on Software version T217SVPUBOH1
Hardware Version T217S.04
Model Number SM-TS17S
Android Ver: 4.4.2
Baseband T217SVPUBOH1
I guess Stock Kernel 3.4.0-1715729
Build Number KOT49H.T217SVOUBOH1
Could Someone direct me to the PROPER CF Auto Root and Odin? I am not planning on changing the ROM, I just want to Add Viper to increase the Audio Volume and maybe some other root controls.
Any and All Help Is Appreciated
Thank you in Advance
Blessings

Thank a lott!!!already rooted!!!!

please need help my galaxy s5 (SM-G900F) is bricked

Hi everyone, i have tried to root my galaxy s5 SM-G900F but i have used wrong root for SM-G900P and ended up with this message and is stuck in logo screen
recovery booting.....
recovery is not seandroid enforcing
set warranty bit : recovery
and i have used the right root also but the same problem, my phone now is working but the recovery mode won't load it show me the same message and logo screen stuck and i have problem with system shut down when level battery is 20%
i tried to install stock rom and i download the right rom i think
the rom Baseband : G900FXXU1ANCE
my phone Baseband : G900FVPU1AND2
i used odin version : 3.10.7
its fail and shows this :
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in my downloading mode from my phone screen shows this : secure check fail : aboot
so i have tried everything to get my phone fixed but nothing same problem so please help me

Check in download mode, which model S5 it says

*Detection* said:
Check in download mode, which model S5 it says
Click to expand...
Click to collapse
it says product name : SM-G900P
current binary: custom
system status: custom
knox warranty void: 0x1 (3)

Your S5 is the G900P then, not the G900F
Lots of S5s have been falsely labelled like this, even firmware states G900F, download mode is correct

*Detection* said:
Your S5 is the G900P then, not the G900F
Lots of S5s have been falsely labelled like this, even firmware states G900F, download mode is correct
Click to expand...
Click to collapse
so what should i do to get my phone un brick

Try flashing a G900P ROM from sammobile with ODIN

*Detection* said:
Try flashing a G900P ROM from sammobile with ODIN
Click to expand...
Click to collapse
ok i will try but im afraid to cause damage to my phone like a hard brick or something gos wrong

abdou royal said:
ok i will try but im afraid to cause damage to my phone like a hard brick or something gos wrong
Click to expand...
Click to collapse
you take us for liars !!!!
and you who flash wrong roms :silly:

abdou royal said:
ok i will try but im afraid to cause damage to my phone like a hard brick or something gos wrong
Click to expand...
Click to collapse
You already bricked it, that's why you're here

*Detection* said:
You already bricked it, that's why you're here
Click to expand...
Click to collapse
yes i did, and i am grateful for the help i will try flashing the G900P rom
it just wondering why that model number in the back my phone is G900F and in the system also on the contrary is G900P in downloading mode

abdou royal said:
yes i did, and i am grateful for the help i will try flashing the G900P rom
it just wondering why that model number in the back my phone is G900F and in the system also on the contrary is G900P in downloading mode
Click to expand...
Click to collapse
G900F is more popular, sells better, falsely label and sell more units, most likely

*Detection* said:
G900F is more popular, sells better, falsely label and sell more units, most likely
Click to expand...
Click to collapse
I did not think so, now I understand thnx again , so when i flash it to G900P it is probably to get locked from recognized the card sim !?

abdou royal said:
I did not think so, now I understand thnx again , so when i flash it to G900P it is probably to get locked from recognized the card sim !?
Click to expand...
Click to collapse
Shouldn't affect the SIM lock at all

*Detection* said:
Shouldn't affect the SIM lock at all
Click to expand...
Click to collapse
yes i did flash it by G900P stock rom its worked my phone unbricked thanx for ur support :fingers-crossed:

abdou royal said:
yes i did flash it by G900P stock rom its worked my phone unbricked thanx for ur support :fingers-crossed:
Click to expand...
Click to collapse
Good stuff

N930TUVU2API4_CL9115549_QB10937257_REV00_user_low_ ship_MULTI_CERT

Here is the the stock T-Mobile newest firmware that was just pushed to everyone's phone that was not rooted.. >>> N930TUVU2API4
FYI::: Do not install this on your phone if you want to keep root<<<< YOU HAVE BEEN WARNED!!!!!
Otherwise Odin this if you want to be on the latest firmware..
Download Zip File -- use your favorite zip program to unpack it, and have fun..

galaxyuser88 said:
Here is the the stock T-Mobile newest firmware that was just pushed to everyone's phone that was not rooted.. >>> N930TUVU2API4
FYI::: Do not install this on your phone if you want to keep root<<<< YOU HAVE BEEN WARNED!!!!!
Otherwise Odin this if you want to be on the latest firmware..
Download Zip File -- use your favorite zip program to unpack it, and have fun..
Click to expand...
Click to collapse
Good one bud.... I can't get it last night but I'm glad u did[emoji106]
TwisT3DroiD_N920T

Threads of this nature do not belong in the development section. Please read the sticky titled "Rules for Posting in Development" before posting in there again.
THREAD MOVED
galaxyuser88 said:
Here is the the stock T-Mobile newest firmware that was just pushed to everyone's phone that was not rooted.. >>> N930TUVU2API4
FYI::: Do not install this on your phone if you want to keep root<<<< YOU HAVE BEEN WARNED!!!!!
Otherwise Odin this if you want to be on the latest firmware..
Download Zip File -- use your favorite zip program to unpack it, and have fun..
Click to expand...
Click to collapse

Can this be odined over the rooted ROM, to return to stock... Before returning to store
Sent from my SM-N930T using XDA-Developers mobile app

PhilPan said:
Can this be odined over the rooted ROM, to return to stock... Before returning to store
Sent from my SM-N930T using XDA-Developers mobile app
Click to expand...
Click to collapse
yes, as odin wipes your internal card and firmware..

PhilPan said:
Can this be odined over the rooted ROM, to return to stock... Before returning to store
Sent from my SM-N930T using XDA-Developers mobile app
Click to expand...
Click to collapse
just factory reset.....poof root gone!

galaxyuser88 said:
Here is the the stock T-Mobile newest firmware that was just pushed to everyone's phone that was not rooted.. >>> N930TUVU2API4
FYI::: Do not install this on your phone if you want to keep root<<<< YOU HAVE BEEN WARNED!!!!!
Otherwise Odin this if you want to be on the latest firmware..
Download Zip File -- use your favorite zip program to unpack it, and have fun..
Click to expand...
Click to collapse
Tried flashing another stock ROM trying to get back to stock from root. That didn't work. Then I flashed this and am able to boot. But my mobile data icon is just 4G instead of being 4G LTE (or LTE), and I'm missing the WiFi calling button as well.
So, I probably need to flash the radios and everything with this. So, do I flash the AP first from the ZIP, then everything else after, or can I flash them all at once? Not an experienced ODIN user. Only used it a handful of times.
---------- Post added at 09:51 PM ---------- Previous post was at 09:50 PM ----------
ted77usa said:
Good one bud.... I can't get it last night but I'm glad u did[emoji106]
TwisT3DroiD_N920T
Click to expand...
Click to collapse
Throwing you in the mix as well. Please see my post above.

-BoneZ- said:
Tried flashing another stock ROM trying to get back to stock from root. That didn't work. Then I flashed this and am able to boot. But my mobile data icon is just 4G instead of being 4G LTE (or LTE), and I'm missing the WiFi calling button as well.
So, I probably need to flash the radios and everything with this. So, do I flash the AP first from the ZIP, then everything else after, or can I flash them all at once? Not an experienced ODIN user. Only used it a handful of times.
---------- Post added at 09:51 PM ---------- Previous post was at 09:50 PM ----------
Throwing you in the mix as well. Please see my post above.
Click to expand...
Click to collapse
@-BoneZ-
U said that u tried to go back to stock from root? Meaning u have pgc firmware and u CAN'T use this PI4 firmware to go back to stock..... when u do that u stuck with newer Bootloader and u not able to root again.... if u need to go back then flash PGC original firmware.
EDIT:
If u already on PI4 then flash all at once.... BL AP CP CSC....
TwisT3DroiD_N920T

-BoneZ- said:
Tried flashing another stock ROM trying to get back to stock from root. That didn't work. Then I flashed this and am able to boot. But my mobile data icon is just 4G instead of being 4G LTE (or LTE), and I'm missing the WiFi calling button as well.
So, I probably need to flash the radios and everything with this. So, do I flash the AP first from the ZIP, then everything else after, or can I flash them all at once? Not an experienced ODIN user. Only used it a handful of times.
---------- Post added at 09:51 PM ---------- Previous post was at 09:50 PM ----------
Throwing you in the mix as well. Please see my post above.
Click to expand...
Click to collapse
Yes you must flash all parts of this to be on stock PI4 ROM. But remember that you will lose root and not get it back.

You sir are a life saver thank you so much i was stupid didnt read thru forums and tried to root on the latest update...this flashed via odin brought my phone back to life

ted77usa said:
@-BoneZ-
U said that u tried to go back to stock from root? Meaning u have pgc firmware and u CAN'T use this PI4 firmware to go back to stock..... when u do that u stuck with newer Bootloader and u not able to root again.... if u need to go back then flash PGC original firmware.
EDIT:
If u already on PI4 then flash all at once.... BL AP CP CSC....
TwisT3DroiD_N920T
Click to expand...
Click to collapse
galaxyuser88 said:
Yes you must flash all parts of this to be on stock PI4 ROM. But remember that you will lose root and not get it back.
Click to expand...
Click to collapse
Thanks, guys. Those were the answers I was looking for.

Hello I want to say thank you for providing the T-Mobile Firmware Package for restoring the Note 7 to its original state after a Rooting atampt botched up. I also had this problem but now restored the phone with the supplied firmware. Thank you.
I do have one problem though. The firmware supplied has the first update with the annoying Safety Recall statement in that hugh box while plug is inserted, pulled out and turned on. I like to know if you can supply the original firmware that the phone came boxed with or if you have some kind of way of getting rid of that stupid annoying big box message that pops up all the time.
And again thank you so much.

Ok I feel like a dumb ass,
This has to be the most complicated root, update I have ever seen. I accidently hit update earlier today which reduced my battery life to 60% I tried living with it today and it was driving me absolutely nuts I thought about taking the phone in and getting a damn iphone just because I'm tired of messing around with this phone..... I tried to root using post one however it keeps failing, I tried rooting using post 2 that also failed. I tried going back one firmware version that also didn't work, I tried doing the samsung smart switch recovery it asks for a code I tried the serial of the phone and model number that also didn't work. Can someone please explain either how to get root from the newest firmware or to revert back to a older firmware that dosen't have this stupid battery restriction. The information of my phone is below .
I'm tired of the battery restriction and tired of hitting okay I know my phone will blow up....
Samsung Note 7 Tmobile
SM-N930T
6.0.1
Build Number
MMB29M.N930TUVU2APK1
any help is appreciated as I am pulling out my hair...

mikesx4911 said:
Ok I feel like a dumb ass,
This has to be the most complicated root, update I have ever seen. I accidently hit update earlier today which reduced my battery life to 60% I tried living with it today and it was driving me absolutely nuts I thought about taking the phone in and getting a damn iphone just because I'm tired of messing around with this phone..... I tried to root using post one however it keeps failing, I tried rooting using post 2 that also failed. I tried going back one firmware version that also didn't work, I tried doing the samsung smart switch recovery it asks for a code I tried the serial of the phone and model number that also didn't work. Can someone please explain either how to get root from the newest firmware or to revert back to a older firmware that dosen't have this stupid battery restriction. The information of my phone is below .
I'm tired of the battery restriction and tired of hitting okay I know my phone will blow up....
Samsung Note 7 Tmobile
SM-N930T
6.0.1
Build Number
MMB29M.N930TUVU2APK1
any help is appreciated as I am pulling out my hair...
Click to expand...
Click to collapse
Have you tried this yet?
★[ROM] [STOCK] N930TUVU1APGC | 6.0.1 |… | T-Mobile Samsung Galaxy Note 7
http://forum.xda-developers.com/tmo...om-n930tuvu1apgc-6-0-1-deodexed-knox-t3461513
---------- Post added at 08:04 AM ---------- Previous post was at 07:56 AM ----------
mikesx4911 said:
Ok I feel like a dumb ass,
This has to be the most complicated root, update I have ever seen. I accidently hit update earlier today which reduced my battery life to 60% I tried living with it today and it was driving me absolutely nuts I thought about taking the phone in and getting a damn iphone just because I'm tired of messing around with this phone..... I tried to root using post one however it keeps failing, I tried rooting using post 2 that also failed. I tried going back one firmware version that also didn't work, I tried doing the samsung smart switch recovery it asks for a code I tried the serial of the phone and model number that also didn't work. Can someone please explain either how to get root from the newest firmware or to revert back to a older firmware that dosen't have this stupid battery restriction. The information of my phone is below .
I'm tired of the battery restriction and tired of hitting okay I know my phone will blow up....
Samsung Note 7 Tmobile
SM-N930T
6.0.1
Build Number
MMB29M.N930TUVU2APK1
any help is appreciated as I am pulling out my hair...
Click to expand...
Click to collapse
If you can restore it back to stock. This thread may help. It's helping me.
Need help with Package Disabler 6.3 | Samsung Galaxy Note 7
http://forum.xda-developers.com/note-7/help/help-package-disabler-6-3-t3494052

So I just tried to do the instructions from the ROM STOCK below however I get stuck on step 5 when I try to flash the "MODIFIED_TMO_SPR_N930PVPU1APH3_REV00_ENGBOOT_FIRM WARE.tar.md5" it FAILS at
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> adspso.bin
<ID:0/003> apdp.mbn
<ID:0/003> boot.img
<ID:0/003> cache.img.ext4
<ID:0/003> FAIL! (Auth) <------------------------
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I than did a quick search had someone suggest checking "re-partition" that also failed with the same error. After rebooting the phone it wouldn't boot anymore and was stuck at "an error has occured while updating the device software. Use the emergency recovery function in the smart switch pc software"
So I gave that a go and it tells me that the device is not supported after doing the model and serial number lol.
ConcernedCustomer said:
Have you tried this yet?
★[ROM] [STOCK] N930TUVU1APGC | 6.0.1 |… | T-Mobile Samsung Galaxy Note 7
http://forum.xda-developers.com/tmo...om-n930tuvu1apgc-6-0-1-deodexed-knox-t3461513
---------- Post added at 08:04 AM ---------- Previous post was at 07:56 AM ----------
If you can restore it back to stock. This thread may help. It's helping me.
Need help with Package Disabler 6.3 | Samsung Galaxy Note 7
http://forum.xda-developers.com/note-7/help/help-package-disabler-6-3-t3494052
Click to expand...
Click to collapse

mikesx4911 said:
So I just tried to do the instructions from the ROM STOCK below however I get stuck on step 5 when I try to flash the "MODIFIED_TMO_SPR_N930PVPU1APH3_REV00_ENGBOOT_FIRM WARE.tar.md5" it FAILS at
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> adspso.bin
<ID:0/003> apdp.mbn
<ID:0/003> boot.img
<ID:0/003> cache.img.ext4
<ID:0/003> FAIL! (Auth) <------------------------
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I than did a quick search had someone suggest checking "re-partition" that also failed with the same error. After rebooting the phone it wouldn't boot anymore and was stuck at "an error has occured while updating the device software. Use the emergency recovery function in the smart switch pc software"
So I gave that a go and it tells me that the device is not supported after doing the model and serial number lol.
Click to expand...
Click to collapse
I was able to stop the 60% update with package disabler, but was also trying to go back to pgc update...getting the same fails as you. 3 Button into recovery and wipe everything then reboot. Should start you fresh to use the phone
Sent from my SM-G935T using XDA-Developers mobile app

ArmyofTracy said:
I was able to stop the 60% update with package disabler, but was also trying to go back to pgc update...getting the same fails as you. 3 Button into recovery and wipe everything then reboot. Should start you fresh to use the phone
Sent from my SM-G935T using XDA-Developers mobile app
Click to expand...
Click to collapse
If only it was that easy. As of now I can't even get into android it fails to boot. I cleared cache and factory reset and still won't boot. I'm sure I will have to flash now for sure from recovery or download mode. I think Samsung is ****n with us somehow to not let us flash.

mikesx4911 said:
If only it was that easy. As of now I can't even get into android it fails to boot. I cleared cache and factory reset and still won't boot. I'm sure I will have to flash now for sure from recovery or download mode. I think Samsung is ****n with us somehow to not let us flash.
Click to expand...
Click to collapse
The same thing happened to me. I re-flashed to the recent firmware I had installed originally (the one with the big ugly safety recall message from September). I flashed everything at once BL, AP, CP and CSC(I used the HOME_CSC_*.tar.md5 named file because I was returning to stock)
This site appears to be an archive for all Android devices. You can find the firmware of your phone using the model going back to launch date.
Download Firmware – Samsung Update
http://updato.com/firmware-archive-select-model
I think you will find this thread useful as well. It contains definitions and explanations on flashing and working with Odin. I just wish there was more information.
Good luck
Galaxy Note 7 All-In-One Information & A… | Samsung Galaxy Note 7
http://forum.xda-developers.com/note-7/help/galaxy-note-7-one-information-answers-t3448689

Is there a way too get back to PGC? That was the one before the recall? I've tried flashing it and it fails
Sent from my SM-G935T using XDA-Developers mobile app

ConcernedCustomer said:
The same thing happened to me. I re-flashed to the recent firmware I had installed originally (the one with the big ugly safety recall message from September). I flashed everything at once BL, AP, CP and CSC(I used the HOME_CSC_*.tar.md5 named file because I was returning to stock)
This site appears to be an archive for all Android devices. You can find the firmware of your phone using the model going back to launch date.
Download Firmware – Samsung Update
http://updato.com/firmware-archive-select-model
I think you will find this thread useful as well. It contains definitions and explanations on flashing and working with Odin. I just wish there was more information.
Good luck
Galaxy Note 7 All-In-One Information & A… | Samsung Galaxy Note 7
http://forum.xda-developers.com/note-7/help/galaxy-note-7-one-information-answers-t3448689
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Failed again... Tried both CSC files

Can I update my Galaxy Grand Prime (SM-G530H) to Lollipop?

My sister's phone is Galaxy Grand Prime and still running Android 4.4.4. I've searched over the net and there is Lollipop update already for some countries. There's still no update here in the Philippines. Can I update this device using firmwares from other countries? Thanks!

jelmerpeligrino said:
My sister's phone is Galaxy Grand Prime and still running Android 4.4.4. I've searched over the net and there is Lollipop update already for some countries. There's still no update here in the Philippines. Can I update this device using firmwares from other countries? Thanks!
Click to expand...
Click to collapse
yes you can! i'm also from the philippines and i'm currently on the Russian firmware (G530HXXUBOH5)

@jelmerpeligrino Post a screenshot of your About Phone. @morgannoobman That is a really old firmware.

Has.007 said:
@jelmerpeligrino Post a screenshot of your About Phone. @morgannoobman That is a really old firmware.
Click to expand...
Click to collapse
Here bro.

morgannoobman said:
yes you can! i'm also from the philippines and i'm currently on the Russian firmware (G530HXXUBOH5)
Click to expand...
Click to collapse
How did you do it?

jelmerpeligrino said:
Here bro.
Click to expand...
Click to collapse
Download this firmware nd the mention me. Also download Odin 3.10.xx
http://www.sammobile.com/firmwares/download/106519/G530HXCU1BPI2_G530HUUB1BPI1_TTT/

Has.007 said:
Download this firmware nd the mention me. Also download Odin 3.10.xx
http://www.sammobile.com/firmwares/download/106519/G530HXCU1BPI2_G530HUUB1BPI1_TTT/
Click to expand...
Click to collapse
If I flashed Lollipop on this device, all data stored on my device will be deleted?
And I searched the latest version of odin, it is now 3.12.3.

jelmerpeligrino said:
If I flashed Lollipop on this device, all data stored on my device will be deleted?
And I searched the latest version of odin, it is now 3.12.3.
Click to expand...
Click to collapse
No

jelmerpeligrino said:
If I flashed Lollipop on this device, all data stored on my device will be deleted?
And I searched the latest version of odin, it is now 3.12.3.
Click to expand...
Click to collapse
As @waleeds1 said, No. But I recommend you to take backup of all your data nd do a factory reset after you flash Lollipop firmware.
That way you won't get any lags or performance glitches.

Has.007 said:
As @waleeds1 said, No. But I recommend you to take backup of all your data nd do a factory reset after you flash Lollipop firmware.
That way you won't get any lags or performance glitches.
Click to expand...
Click to collapse
What are the steps on how to flash Lollipop? I already have the necessary files to begin with. Thanks!

jelmerpeligrino said:
What are the steps on how to flash Lollipop? I already have the necessary files to begin with. Thanks!
Click to expand...
Click to collapse
Make sure you've a good backup. Nd also you've Samsung USB drivers already installed in your PC.
Power off your device nd boot in download mode by pressing Volume Down + Home + Power Buttons together.
Then open Odin nd connect your phone to PC via data cable nd press volume Up key on phone, then if it shows you "Added" in Odin you're good to go.
Select the AP option nd select the firmware which you've downloaded. Now it'll take some time to verify the md5 as depending upon the speed of your PC. Once it has verified you'll be able to click on other options. So now you've to click on Start nd make sure you don't move your device or the connection doesn't cut off or your device might get hard bricked.
That's it, the flashing time would be about 4-5 minutes. After it is flashed the phone will reboot nd now you can factory reset the device properly for a clean new device.
I've told everything you needed to know.
Enjoy!

Has.007 said:
As @waleeds1 said, No. But I recommend you to take backup of all your data nd do a factory reset after you flash Lollipop firmware.
That way you won't get any lags or performance glitches.
Click to expand...
Click to collapse
The thing you said is correct but I recommend first start your phone without factory reseting @jelmerpeligrino becuase if u dont face any performance or other issues. But if u wish to factory then its still a good choice

waleeds1 said:
The thing you said is correct but I recommend first start your phone without factory reseting @jelmerpeligrino becuase if u dont face any performance or other issues. But if u wish to factory then its still a good choice
Click to expand...
Click to collapse
Yes I told that in my second post.
Actually I believe he has been using Kitkat from a long time nd for most of the apps, the things have changed. The API differences creates certain problems as it is recommended by Samsung itself to factory reset the device after Android version change.
From Kitkat to Kitkat nd Lollipop to Lollipop factory reset is not needed but for SDK changing it is needed.

Has.007 said:
Yes I told that in my second post.
Actually I believe he has been using Kitkat from a long time nd for most of the apps, the things have changed. The API differences creates certain problem as it is recommended by Samsung itself to factory reset the device after Android version change.
From Kitkat to Kitkat nd Lollipop to Lollipop factory reset is not needed but for SDK changing it is needed.
Click to expand...
Click to collapse
I didnt read that part. U got a point there mate.

Hi, I've roote my Galaxy grand prime successfully and want to upgrade to Lollipop but it doesn't work, I've tried already several files but it always ends with an error
here is the Odin Log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What can I do to make i happen
Happy new year to all of you

woris said:
Hi, I've roote my Galaxy grand prime successfully and want to upgrade to Lollipop but it doesn't work, I've tried already several files but it always ends with an error
here is the Odin Log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What can I do to make i happen
Happy new year to all of you
Click to expand...
Click to collapse
Did you download the correct firmware and are you using ap in odin if nor then you should use ap and browse for the firmware.

waleeds1 said:
Did you download the correct firmware and are you using ap in odin if nor then you should use ap and browse for the firmware.
Click to expand...
Click to collapse
Thanks for your reply, yes, I've got the correct Firmware, correct Odin settings, I even tried the Kasachstan firmware that you used but same result.

Has.007 said:
Yes I told that in my second post.
Actually I believe he has been using Kitkat from a long time nd for most of the apps, the things have changed. The API differences creates certain problems as it is recommended by Samsung itself to factory reset the device after Android version change.
From Kitkat to Kitkat nd Lollipop to Lollipop factory reset is not needed but for SDK changing it is needed.
Click to expand...
Click to collapse
Is this normal bro? I flashed it already.

waleeds1 said:
Did you download the correct firmware and are you using ap in odin if nor then you should use ap and browse for the firmware.
Click to expand...
Click to collapse
woris said:
Thanks for your reply, yes, I've got the correct Firmware, correct Odin settings, I even tried the Kasachstan firmware that you used but same result.
Click to expand...
Click to collapse
No you don't have the right firmware for your device. The baseband difference. Post a screenshot from your About Phone nd also the link of firmware you're trying to flash.
jelmerpeligrino said:
Is this normal bro? I flashed it already.
Click to expand...
Click to collapse
Yes it is normal, It is weird tho how you've two devices connected. Or maybe there's some bug in this version of Odin. Anyways all working good?

Has.007 said:
No you don't have the right firmware for your device. The baseband difference. Post a screenshot from your About Phone nd also the link of firmware you're trying to flash.
Yes it is normal, It is weird tho how you've two devices connected. Or maybe there's some bug in this version of Odin. Anyways all working good?
Click to expand...
Click to collapse
So far, it was good. The performance is better now compared to Kitkat and and the sluggishness was gone. Thanks bro!
Btw, do you have any Marshmallow ROM for this device?

Galaxy Note 4 N910G Problem after trying to update phone stucks can't perform nothing

Hello. Here is my first post. So if sth is not clear tell me to add it.
I have a galaxy note 4 N910G. When the message for update came i accepted. The update was downloaded but then the problems started. Phone closed and didn't opened again. i waited for half an hour but nothing. So i searched on internet for what to do. I removed the battery and bla bla. The phone opened and the screen said Could not do normal boot. etc. When i go to perform a hard reset or soft reset it works but. The phone opens at the old version and it is really slow than ever. Also the phone after this can't perform a restart or if i shut it down i have to remove the battery and press the power button one minute and then i put the battery and it works but really really slow. When i hit on the settings for a reset the phone closes and don't open again. Also when i hit update software it says that failed to communicate to server try again when the phone is connected to a working wifi.
Flashing the stock rom again is not possible odin and kies report faults. Any ideas? How to have my phone back again? Maybe root the phone?
Thank you.

Download a firmware from sammobile flash from odin note flash with the latest update
Sent from my SM-G800F using Tapatalk

ferouzferzkassim said:
Download a firmware from sammobile flash from odin note flash with the latest update
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
How to download from sammobile? I have to pay?
Because it's really slow.
Can i find it somewhere to download it faster?
I have tried to flash a rom but odin says some faults and continue the procedure

michael.chania said:
How to download from sammobile? I have to pay?
Because it's really slow.
Can i find it somewhere to download it faster?
I have tried to flash a rom but odin says some faults and continue the procedure
Click to expand...
Click to collapse
Can u send the log we see evn detailed pictures andd u may also try tsar3000.com they also have good repair firmware
Sent from my SM-G800F using Tapatalk

ferouzferzkassim said:
Can u send the log we see evn detailed pictures andd u may also try tsar3000.com they also have good repair firmware
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
When you say the log what do you mean exactly?
I searched at the sit you suggested me. I started downloading one version
but my phone says it is from Singapore but there is no version for Singapore.
I started downloading N910G India. Is this ok?
I forgot to mention that someone maybe tried to root the phone but that failed.
Because this phone is not mine it's my cousin's i don't know what exactly happened.

Provided it is same biuld number like n910g it doesnt matrr
Sent from my SM-G800F using Tapatalk

ferouzferzkassim said:
Provided it is same biuld number like n910g it doesnt matrr
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
And after i download the file what should i do?
What is the right way for the phone to get this iso?
Thanks

michael.chania said:
And after i download the file what should i do?
What is the right way for the phone to get this iso?
Thanks
Click to expand...
Click to collapse
Download odin install drivers samsung drivers and thn put phone in download mode with volumedown and power plus home conect phone to pc then flash using odin
Sent from my SM-G800F using Tapatalk

Now the phone is working completely. I installed normally the software and it seems ok. Meanwhile when i have some multitasking the phone seems to freak out. The screen is going off and after secs again on.
Is there something i can do or this normal for this phone?
Thanks a lot

Problem again. When i installed the rom the phone gave me a notification for an update for improvement of performance and bugs.
I accepted because the phone was really slow. After that i accepted to install the update then the phone closes the update is installed and when it finished the phone closed and not opened again after waiting for half an hour. when i tryied to open it the phones starts to install the same update again but the same the phones shuts down. I tried to flash again the rom and here is the log of the odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Write)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What can i do?
SAVE ME!!!

michael.chania said:
What can i do?
SAVE ME!!!
Click to expand...
Click to collapse
mate, have a look at my post which can be a solution for you
https://forum.xda-developers.com/note-4/help/fixed-note-4-n910g-emmc-start-normal-t3856903