Related
Hello people, I bought a second hand galaxy note today, using Samsung keyboard, when I press the letter keys, instead of getting the corresponding letter I am getting "null" on the screen. Other keyboard works fine.
You need to flash CSC according ROM you have installed
Give this detail from setting - about phone
Baseband ?
Kernel ?
version ?
as well dial this
*#1234#
and input result here
Baseband: N7000XXLPT
Kernel: 3.0.15-N7000XXLQ2-CL605927
[email protected]#3
Build number: IML74K.XXLQ2
PDA: N7000XXLQ2
Phone: N7000XXLPT
CSC: Unknown
I bought this phone second, the previous owner must have flash it without CSC
Flash the same ROM again with putting the ROM file in the [Cash] option in Mobile Odin.
Search for this ROM - UK I guess - in dr.ketan topic.
Good luck
Is it important to have csc?
FinancialWar said:
Is it important to have csc?
Click to expand...
Click to collapse
If you don't want it to do what it's doing it is. It contains other boots and bobs to do with the region your in.
Sent from my GT-N7000 using Tapatalk 2
FinancialWar said:
Baseband: N7000XXLPT
Kernel: 3.0.15-N7000XXLQ2-CL605927
[email protected]#3
Build number: IML74K.XXLQ2
PDA: N7000XXLQ2
Phone: N7000XXLPT
CSC: Unknown
I bought this phone second, the previous owner must have flash it without CSC
Click to expand...
Click to collapse
find lq2 rom and flash csc by selecting pda tab in odin. remembet yoy will lose data, so backup first.
Sent from my GT-N7000 using xda premium
I had look at your thread, does that mean I have to buy Mobile Odin Pro for the newer ICS firmware?
you can flash csc.with pc.odin too.
mobile odin have some.extra benifit like keep root while flashing. it is hassle free from pc connection.
so it is not must, just optional.
Sent from my GT-N7000 using xda premium
I am confused. I just bought the Mobile Odin and am getting
" superuser access is needed but could not be acquired . are you rooted and did give permission.
what am I supposed to do?
have you open supersu appl and updated binary?
if your root is proper, first time it will ask to grant permission.
Sent from my GT-N7000 using xda premium
dr.ketan
I went through the root process in your "When all other method fails to root your device"
after everything was done, I am stuck on the Welcome to GT-N7000 screen.
Keeps on getting error messages popping up, then the phone would go blank and then slowly display this weird greenish screen.
here is the message report from Odin
OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
FinancialWar said:
dr.ketan
I went through the root process in your "When all other method fails to root your device"
after everything was done, I am stuck on the Welcome to GT-N7000 screen.
Keeps on getting error messages popping up, then the phone would go blank and then slowly display this weird greenish screen.
here is the message report from Odin
OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
Click to expand...
Click to collapse
yes it is common, b'coz kj1 hav old kernel. now. just flash newer cf root kernel like lb1 .
Sent from my GT-N7000 using xda premium
dr.ketan said:
yes it is common, b'coz kj1 hav old kernel. now. just flash newer cf root kernel like lb1 .
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
How do I flash the newer cf root kernel?
Sent from Samsung Galaxy Note
I think the question needs to be asked, do you actually want root and non standard firmware/kernel?
If you just want a standard phone but want to solve the problem you originally asked about then just download and flash factory firmware from Sammobile.com using pc odin.
Sent from my GT-N7000 using XDA
FinancialWar said:
How do I flash the newer cf root kernel?
Sent from Samsung Galaxy Note
Click to expand...
Click to collapse
Download this and flash with Mobile odin
http://download.chainfire.eu/149/CF-Root/SGN/CF-Root-SGN_XX_OXA_LB1-v5.0-CWM5.zip
scotthubbard said:
I think the question needs to be asked, do you actually want root and non standard firmware/kernel?
If you just want a standard phone but want to solve the problem you originally asked about then just download and flash factory firmware from Sammobile.com using pc odin.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
it won't work because my kernel is too old? I tried that already and I get error messages
dr.ketan said:
Download this and flash with Mobile odin
http://download.chainfire.eu/149/CF-Root/SGN/CF-Root-SGN_XX_OXA_LB1-v5.0-CWM5.zip
Click to expand...
Click to collapse
That seems to do the trick, the note is now running the ICS firmware probably.
dr.ketan said:
You need to flash CSC according ROM you have installed
Give this detail from setting - about phone
Baseband ?
Kernel ?
version ?
as well dial this
*#1234#
and input result here
Click to expand...
Click to collapse
Android Version: 2.3.5
Baseband: N7000XXLA4
Kernel Version: 2.6.35.7-N7000XXKJ1-CL627135 [email protected] #2
Build: GingerBread.XXKJ1
PDA: N700XXKJ1
Phone: N7000XXLA4
CSC: Unknown
What do i do? Im also facing the same issue with the keyboard? Let me know ASAP Explain in noob language please
Flash csc this way
Open pc odin - select csc tab - point to rom file which you hav flashed.
Flash.
Sent from my GT-N7000 using xda premium
I got my S4 these days. I have flashed XXUAME2 with Odin, rooted the phone, tried MIUI, but was not satisfied. So I restored the backup. Everything was working fina till I installed Adaway and rebooted the phone. Suddenly the wifi was not working anymore. I clicked on the wifi-witch to activate WiFi - no result. Then I rolled back the backup, installed the I9505_XXUEMJ5_MODEM, installed even the "fix". But the wifi still does not work.
Now I just want to have a normal S4 with the original rom, rooted - and working wifi.
What should I do?
Thanks a lot in advance! :highfive:
nalitox said:
I got my S4 these days. I have flashed XXUAME2 with Odin, rooted the phone, tried MIUI, but was not satisfied. So I restored the backup. Everything was working fina till I installed Adaway and rebooted the phone. Suddenly the wifi was not working anymore. I clicked on the wifi-witch to activate WiFi - no result. Then I rolled back the backup, installed the I9505_XXUEMJ5_MODEM, installed even the "fix". But the wifi still does not work.
Now I just want to have a normal S4 with the original rom, rooted - and working wifi.
What should I do?
Thanks a lot in advance! :highfive:
Click to expand...
Click to collapse
Hello mate please download this file and flash it via odin by selecting phone, and Remember to turn it off your phone manually before flashing any modem,If the problem still persist please tell me if your in old bootloader or the new bootloader and will be happy to assist you have a nice day.
To check your bootloader go to download mode and if you have an entry of Knox warranty void then you are having the new bootloader.
If you are having the old bootloader XXUB flash http://www.mediafire.com/download/48r0rgqv25s8968/GSM_Modem_XXUEMFK_and_LTE_Modem_XXUBMH1.rar file with odin by selecting phone.
If you are having the new bootloader XXUD flash http://www.mediafire.com/download/zriv6i5c01lqns6/GSM_Modem_XXUEMFK_and_LTE_Modem_XXUMFK.rar file with odin by selecting phone.
First, wow, thanks for that fast reply, dude! Ok, I have 0x1, that means, I have to flash the file for the new bootloader, right?
Is there anywhere a mirror? I am in China right now and mediafire is blocked.
Cheers :highfive:
nalitox said:
First, wow, thanks for that fast reply, dude! Ok, I have 0x1, that means, I have to flash the file for the new bootloader, right?
Is there anywhere a mirror? I am in China right now and mediafire is blocked.
Cheers :highfive:
Click to expand...
Click to collapse
Sorry for any delay sir , here's another link inorder for you to download it https://dl.dropboxusercontent.com/u/17236295/MKF_modems_GSM_LTE.tar.md5.zip Credit goes to phil.o for uploading the file , and make sure to thank him here http://forum.xda-developers.com/showthread.php?p=48095149#post48095149as well, have a nice day sir
Alright, thanks. That was a quick download, thanks.
What I did:
1. turned off the phone, removed battery, inserted battery again
2. booted into the download mode
3. flashed the file with odin:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MKF_modems_GSM_LTE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
The problem is still there. I cannot turn the Wifi-switch to "ON".
What is causing this problem and what can I do?
nalitox said:
Alright, thanks. That was a quick download, thanks.
What I did:
1. turned off the phone, removed battery, inserted battery again
2. booted into the download mode
3. flashed the file with odin:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MKF_modems_GSM_LTE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
The problem is still there. I cannot turn the Wifi-switch to "ON".
What is causing this problem and what can I do?
Click to expand...
Click to collapse
What rom are you using sir? and what kind of recovery do you have? Flash a different kernel. Or do a clean wipe
---------- Post added at 04:00 PM ---------- Previous post was at 03:53 PM ----------
Repulsa said:
What rom are you using sir? and what kind of recovery do you have? Flash a different kernel. Or do a clean wipe
Click to expand...
Click to collapse
Edit: if flashing a different kernel thats not work then I think the only way to fix this would be to flash a complete official stock firmware which you can get it from here http://www.sammobile.com/firmwares/2/ or if you want a pre-rooted you can follow the instruction here.http://forum.xda-developers.com/showthread.php?t=2250824 have a nice day sir and merry christmas to you.
Cool, I saw your edit post. Thanks, dude.
What Firmware should I choose? The phone was bought in Germany from BASE. BASE is using the E-Plus network. But the phone is not branded nor carrier-locked. Should I choose the E-Plus Firmware?
Plus. How to install the Firmware? Just use Odin3 to flash it?
nalitox said:
I prefer a clean wipe. How to do that? Where can I obtain the files?
Click to expand...
Click to collapse
if you want a stock rom from samsung you can go from here http://www.sammobile.com/firmwares/2/ and if you want a pre-rooted rom you can go from here as well http://forum.xda-developers.com/showthread.php?t=2250824 Have a nice day.
Remember to follow any instruction before flashing. you have to flash the firmware via odin and select pda. And flash away. And sorry that i cannot assist you for now because ill be having a dinner with my family and hoping someone will help you to fix this problem if the problem still persist after flashing the stock firmware. Merry christmas to you n your family . And xda community
Ok, understood, thanks.:good:
I want to get a pre-rooted ROM. What version should I pick? I want to have Android 4.3 and (if possible) de-bloated. My Knox is 0x1 and I don't really care about Knox or Knox-related features.
The list here http://forum.xda-developers.com/showthread.php?t=2250824 is very long and complicated. I read through it two times and am not sure what ROM to download.
Can anyone assist, please?
Merry Christmas everyone! :highfive:
nalitox said:
Ok, understood, thanks.:good:
I want to get a pre-rooted ROM. What version should I pick? I want to have Android 4.3 and (if possible) de-bloated. My Knox is 0x1 and I don't really care about Knox or Knox-related features.
The list here http://forum.xda-developers.com/showthread.php?t=2250824 is very long and complicated. I read through it two times and am not sure what ROM to download.
Can anyone assist, please?
Merry Christmas everyone! :highfive:
Click to expand...
Click to collapse
1. Latest version android 4.3 MKE pre-rooted -> HERE
2. For de-bloat it -> HERE
Alright, I have installed this pre rooted version. Wifi works again, thanks.
One annoying issue: everytime I restart the phone, I have to activate Wifi again and re-enter the password.
Edit: Another very annoying issue: I believe that screen is not being dimmed correctly. It is always to dark, even in a very bright enviroment. Plus: the LEDs of both hardware keys are always on when the screen is on.
I just want to have the normal Samsung Stock rooted.
What am I doing wrong?
nalitox said:
Alright, I have installed this pre rooted version. Wifi works again, thanks.
One annoying issue: everytime I restart the phone, I have to activate Wifi again and re-enter the password.
Edit: Another very annoying issue: I believe that screen is not being dimmed correctly. It is always to dark, even in a very bright enviroment. Plus: the LEDs of both hardware keys are always on when the screen is on.
I just want to have the normal Samsung Stock rooted.
What am I doing wrong?
Click to expand...
Click to collapse
If you installed the pre-rooted rom and your having a problem do a factory reset bro phone settings> accounts > backup and reset >Factory reset . Or turnb off your device manually and wait a few sec hold power+volume up the same time and do it there as well, Make sure to use the odin 3.09 when your flashing ..ODIN has problems with flashing latest FW's and if WiFi doesn't work you MUST flash ROM again
Repulsa said:
.ODIN has problems with flashing latest FW's and if WiFi doesn't work you MUST flash ROM again
Click to expand...
Click to collapse
Does this mean that I have to re-flash a new ROM via the recovery?
nalitox said:
Does this mean that I have to re-flash a new ROM via the recovery?
Click to expand...
Click to collapse
No If you download the pre-rooted rom you need to flash it via odin , just like how you flash the stock rom have a nice day.
Edit: if you see a .tar inside of the file means you need to flash it via odin
Understood. Alright, since I don't want to lose all my apps and settings, I decided to flash the Wifi-Fix: XXUEMKE WiFi_FIX
I used Odin to flash this tar.
Unfortunately the Wifi has still the same issue like in the beggining.
Is there an option to flash the wifi fix in the recovery?
nalitox said:
Understood. Alright, since I don't want to lose all my apps and settings, I decided to flash the Wifi-Fix: XXUEMKE WiFi_FIX
I used Odin to flash this tar.
Unfortunately the Wifi has still the same issue like in the beggining.
Is there an option to flash the wifi fix in the recovery?
Click to expand...
Click to collapse
The question is, did u even extract the file you download ? And no you can only flash it via odin and select phone/cp
Sent from my Phone.
Hey, thanks for your help, mate!
Yap, I have extracted the file and flashed the *.tar via odin. Still no result.
Alright, to sum it up. The fix does not work for me. Why? Should I try to flash another Modem?
edit: I really want to have the phone working now. I dont care about other modifications, I just want to have the basic OS rooted. That is all. How to do this?
nalitox said:
Hey, thanks for your help, mate!
Yap, I have extracted the file and flashed the *.tar via odin. Still no result.
Alright, to sum it up. The fix does not work for me. Why? Should I try to flash another Modem?
Click to expand...
Click to collapse
If i have this problem right now,the best thing i will do is either to flash pre-rooted rom or the stock rom if there is any Fc and such . Just turn of your phone the wait a few sec and hold power+volume up in order to reach recovery and do a wipe cache and a factory reset . Hehe
Edit:you already did flash the pre rooted that joku gave u right? Reflash it and follow the step above
Sent from my Phone.
Ok, thanks.
There are no FC at all, just the wifi is the problem.
However, I will flash I9505XXUAME2_MODEM, apply the fix and hope that it will work.
Should I flash modem with odin via "PDA" oder via "PHONE"?
Another question: If I download a pre-rooted ROM and flash it via the recovery, will the new modem be included in the ROM?
Thanks again, mate.
Edit: http://d-h.st/users/DjeMBeY/?fld_id=16262#files
There is no fix for the UAME2. That sucks.
nalitox said:
Ok, thanks.
There are no FC at all, just the wifi is the problem.
However, I will flash I9505XXUAME2_MODEM, apply the fix and hope that it will work.
Should I flash modem with odin via "PDA" oder via "PHONE"?
Another question: If I download a pre-rooted ROM and flash it via the recovery, will the new modem be included in the ROM?
Thanks again, mate.
Click to expand...
Click to collapse
Download odin 3.09 its better to use it with s4.
If your gonna flash the modem always use PHONE/CP. If your flashing pre-rooted rom from djembey or samsung stock firmware always use PDA. And if you download custom rom such as omega,phoenix,golden,etc.etc then you flash that via recovery using either CWM, philz or twrp.
Edit try emj5 wifi fix if not just do a fresh install
Sent from my Phone.
can someone help me how to root n9005 lollipop version and how to install CWM to lollipop n9005? thanks....
Use Odin. pda.
kenny1991 said:
Use Odin. pda.
Click to expand...
Click to collapse
Can you please elaborate? I am a noob to the note 3 root on Lollipop. on the new Odin there is no PDA option, is there a newer up too date thread somewhere of how to do this please?
---------- Post added at 09:07 PM ---------- Previous post was at 08:36 PM ----------
Nico231995 said:
can someone help me how to root n9005 lollipop version and how to install CWM to lollipop n9005? thanks....
Click to expand...
Click to collapse
Did you get yours rooted? I need help getting mine done.
DevilsArc said:
Can you please elaborate? I am a noob to the note 3 root on Lollipop. on the new Odin there is no PDA option, is there a newer up too date thread somewhere of how to do this please?
---------- Post added at 09:07 PM ---------- Previous post was at 08:36 PM ----------
Did you get yours rooted? I need help getting mine done.
Click to expand...
Click to collapse
on laster Odin (V3.09 or v3.10)
PDA is AP
download the laster TWRP or phliztouch link for TWRP: http://www.techerrata.com/file/twrp2/hlte/openrecovery-twrp-2.8.3.0-hlte-4.4.img.tar
place in AP on odin and flash
And download the zip flashable by chanfire and flash on recovery http://download.chainfire.eu/644/SuperSU/BETA-SuperSU-v2.42.zip
done
And my phone is not the root
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
My Phone N9005 and Lollipop 5.0 N9005XXUGBNL8 installed.
Odin when I go to install v3.10 twrp or CR with getting the above error.
Debugging active.
I run the Odin as administrator.
V3.7 I get the same error message.
ZeoN1907 said:
My Phone N9005 and Lollipop 5.0 N9005XXUGBNL8 installed.
Odin when I go to install v3.10 twrp or CR with getting the above error.
Debugging active.
I run the Odin as administrator.
V3.7 I get the same error message.
Click to expand...
Click to collapse
I have flashing TWRP 2 times, it's work very well (odin 3.09)
I'm on GBNL8 too
Bruno saa said:
I have flashing TWRP 2 times, it's work very well (odin 3.09)
I'm on GBNL8 too
Click to expand...
Click to collapse
I'm so tired I'm sorry.
I wonder?
The email address you download Odin,
Can I get the address or the address you're TWRP version and download version or download supers? If possible?
You send them to a compressed file or via email?
I tried many ways but I'm having trouble.
My English is not good. Forgive me. Please.
Port USB
ZeoN1907 said:
My Phone N9005 and Lollipop 5.0 N9005XXUGBNL8 installed.
Odin when I go to install v3.10 twrp or CR with getting the above error.
Debugging active.
I run the Odin as administrator.
V3.7 I get the same error message.
Click to expand...
Click to collapse
Hi,
I had the same problem and same message for a long time.
And one day i tried to do that with another usb port. It WORKED ! simple as that
Cheers
is there BOG1 modem zip file (Peru Rom Modem)in flashable with twrp ,or any method to flash it to any custom rom ,can anyone help me( for 910C)
mudur1998 said:
is there BOG1 modem zip file (Peru Rom Modem)in flashable with twrp ,or any method to flash it to any custom rom ,can anyone help me( for 910C)
Click to expand...
Click to collapse
https://www.androidfilehost.com/?w=files&flid=36088
Click the second link, unzip and flash with odin.
Toss3 said:
https://www.androidfilehost.com/?w=files&flid=36088
Click the second link, unzip and flash with odin.
Click to expand...
Click to collapse
thanks,In my opinion ,this modem is good for strenght signal ,When I flashed Peru rom did not meet weak signal
Toss3 said:
https://www.androidfilehost.com/?w=files&flid=36088
Click the second link, unzip and flash with odin.
Click to expand...
Click to collapse
Do you know where can I get a modem for my N910C? Is from Mexico but now I'm living in the US and the signal strength is really bad, I only have 1 bar and when I'm lucky I have two. Also 90% of the time I lose signal when I'm inside a building. I tried to flash this modem you suggested but I get this:
<ID:0/010> NAND Write Start!!
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010> Receive Response from boot-loader
<ID:0/010> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Removed!!
And a big red ugly "FAIL!" in Odin.
Thanks man!!
Hi, so i'd like to upgrade my AT&T GS7 G930A to the latest available version of android that's released, as i'm still on the nougat beta update from earlier this year that wasn't officially released(meaning i'm still only at security update's from january 2017), however, none of the odin files i've tried have worked (links will be below) it keeps getting stuck at "Initializing" and on my phone it keeps saying "Odin Protocol version error", so i was hoping you guys would be able to help me
https://forum.xda-developers.com/att-galaxy-s7/how-to/pk1-odin-files-t3522168 (was going to OTA update after downgrading)
https://forum.xda-developers.com/att-galaxy-s7/how-to/firmware-g930aucu4bqd4-5-18-2017-t3608909
and https://forum.xda-developers.com/att-galaxy-s7/how-to/g930a-android-n-offical-odin-package-t3567801
the version currently installed on my phone is G930AUCU4BQA4
You need to go completely back to stock in order to get back on nougat latest I suggest that you flash back to the pk1 marshmallow 6.0 and use the odin provided by Sam mobile
logoster said:
Hi, so i'd like to upgrade my AT&T GS7 G930A to the latest available version of android that's released, as i'm still on the nougat beta update from earlier this year that wasn't officially released(meaning i'm still only at security update's from january 2017), however, none of the odin files i've tried have worked (links will be below) it keeps getting stuck at "Initializing" and on my phone it keeps saying "Odin Protocol version error", so i was hoping you guys would be able to help me
https://forum.xda-developers.com/att-galaxy-s7/how-to/pk1-odin-files-t3522168 (was going to OTA update after downgrading)
https://forum.xda-developers.com/att-galaxy-s7/how-to/firmware-g930aucu4bqd4-5-18-2017-t3608909
and https://forum.xda-developers.com/att-galaxy-s7/how-to/g930a-android-n-offical-odin-package-t3567801
the version currently installed on my phone is G930AUCU4BQA4
Click to expand...
Click to collapse
Just flash this firmware using Odin3_v3.12_PrinceComsy
muniz_ri said:
Just flash this firmware using Odin3_v3.12_PrinceComsy
Click to expand...
Click to collapse
Nope, now i get
Code:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
tlopez1973 said:
You need to go completely back to stock in order to get back on nougat latest I suggest that you flash back to the pk1 marshmallow 6.0 and use the odin provided by Sam mobile
Click to expand...
Click to collapse
how would i go about finding these files? as you can see by one of the links in my post, i already tried the PK1 firmware from here
From what I learned it always ends up being an Odin problem not going back just try different versions of Odin make sure your restart your phone when putting it in download mode
logoster said:
Nope, now i get
Code:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try just flashing the CSC file with that Odin version. It contains the .pit file to format your partitions. If that works you should then be able to flash all 4 files.
muniz_ri said:
Try just flashing the CSC file with that Odin version. It contains the .pit file to format your partitions. If that works you should then be able to flash all 4 files.
Click to expand...
Click to collapse
nope, same error, <ID:0/004> FAIL! Model dismatch fail
logoster said:
nope, same error, <ID:0/004> FAIL! Model dismatch fail
Click to expand...
Click to collapse
Try the reverse for kicks and giggles meaning try all other files except CSC.
muniz_ri said:
Try the reverse for kicks and giggles meaning try all other files except CSC.
Click to expand...
Click to collapse
<ID:0/004> FAIL! Model dismatch fail
tlopez1973 said:
From what I learned it always ends up being an Odin problem not going back just try different versions of Odin make sure your restart your phone when putting it in download mode
Click to expand...
Click to collapse
so do you have any links to both the PK1 files and odin that you know work? because i still have this problem, and everything i've tried just keeps giving me the same errors, either that odin protocol mismatch, or the model dismatch failure (and you also said try sammobile odin? i can't find it, and their website seems to insist that the G930A doesn't exist)
Sorry for bumping, but I'd really like to fix this