Hardware
System chip:
Qualcomm Snapdragon S1 MSM7227A
Processor:
Single core, 1000 MHz, ARM Cortex-A5
Graphics processor:
Adreno 200 (enhanced)
System memory:
512 MB RAM
Built-in storage:
1 GB
Storage expansion:
microSD, microSDHC up to 32 GB
--------------------------------------------------------------------
any custom ROM. any Generic Firmware or any other tips?
Related
Hi, my english isn´t very good but i hope you understand, here i go.
I buy a chinese Note 4 and i need help to find and flash a new room, these are my model info:
MediaTek MT6572 1.00 GHz
Cores: 2
Architecture: 2x ARM Cortex-A7 @ 1.00 GHz
Revision: r2p1
Process: 28nm
Clock Speed: 598 MHz - 1.00 GHz
GPU Vendor: Qualcomm
GPU Renderer: Adremo(TM)330
Scaling Governor: hotplug
Model: Samsung Galaxy Note 4 Duos (N9100)
Brand: samsung
Board: rtech72_we_72_kk
Hardware: mt6572
Screen Size: 5.70 inches
Screen Resolution: 540 x 960 pixels
Screen Density: 193 dpi
Dimensions: 153.5 x 78.6 x 8.5 mm
Weight: 175 g
Total RAM: 1860 MB
Internal Storage: 1.27 GB
Release Date: 2014-10-01
Android Version: 4.4.2
API Level: 19
Bootloader: unknown
Build ID: ALPS.KK1.MP6.V1
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Architecture: armv71
Kernel Version: 3.4.0-1273465(G900SKSU1AND3)
Root Access: No
Thanks for reading
I'm pretty sure that is not a Samsung Note 4....
Almost every line does not match the Samsung specs...
Hi all,
I've bought a sympatic Android car autoradio on Android 4.4. I've succesfully rooted it via Kingroot, replaced by SuperSu, but I don't know where I can found a cimpatible CWM or other recovery.
Here is the specs of the tablet (via CPU-Z):
Cores: 4
Architecture: 4x ARM-Cortex A7 @ 1.60GHz
Revision: r0p3
Clock Speed: 166 MHz - 1.60 GHz
CPU 0: 1600 MHz
CPU 1: 1600 MHz
CPU 2: stopped
CPU 3: stopped
CPU Load: 5%
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
GPU Load: 0%
Scaling Governor: userspace
Model: AC8227
Manufacturer: ATC
Brand: Android
Board: Unknown
Hardware: autochipsac83xx
Screen Size: 7066,53 inches
Screen Resolution: 800x400 pixels
Screen Density: 0dpi
Toal RAM: 835MB
Available RAM: 196MB (23%)
Internal Storage: 0,29 GB
Available Storage: 0,17GB (58%)
Android Version: 4.4.4
API Level: 17
Bootloader: unknown
Build ID: JDQ39E.V3.10.02-20160711
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Architecture: armv71
Kernel Version: 3.4.35 (V3.10.02-20160711)
Root Access: Yes
System Uptime: 00:07:09
Click to expand...
Click to collapse
I need a recovery for flashing Gapps, principaly for the Play Store. simply install a Play Store apk doesn't work, install a modded version via Lucky Patcher does'nt work...
Have you any idea please?
My rooted XT1641 32GB is from Koodo Canada. Current ROM: Stock 8.1.0 (athene-8.1.0-OPJ28.111-22).
HWInfo app gave me this. Notice: Machine=armv7l. ABI=armeabi-v7a.
But Google says: "The Qualcomm Snapdragon 617 MSM8952 is a mid-range ARMv8-based SoC".
Is that because of my Provider-ROM ? Important though since gApps and apk depend on. Could somebody check with your version please. Thank you.
............................................
SOC
SoC Snapdragon 617
CPU msm8952
Vendor Qualcomm
Cores 8
big.LITTLE 2 clusters
Clusters 4 x 1.52 GHz
4 x 1.21 GHz
Family Cortex-A53
Machine armv7l
ABI armeabi-v7a
Instructions swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 evtstrm
Process technology 28 nm
Revision r0p4
Clock speed 806 - 1516 MHz
Governor interactive
GPU Adreno (TM) 405
Vendor Qualcomm
OpenGL ES 3.2 [email protected] ([email protected], I47556f00c5) (Date:04/30/18)
Clock speed 240 - 550 MHz
Though the Snapdragon 617 is 64 bit capable, the stock ROM (including TWRP flashables) is 32 bit in nature (likely a reason for the armv7 architecture shown, which is the same in my G4 Plus). Hence on stock firmware, you'll need 32 bit apps.
If you're wanting to make use of the 64 bit capability, you'll need a 64 bit TWRP and a 64 bit custom ROM, along with 64 bit (ARM-64) GApps.
quad-core t3 k2001m -16 gb rom - 1gb ram
how can i changed the resoultion back as 1024*600 ?
PLEASE HELP!
please you can send me this update mi mail is [email protected]
I have got a very old 2011 unmodded samsung galaxy tab 10.1, is there any way that I can run windows 8.1 natively on the device. Even better if I can dualboot it.
IMO you can't because the system requirements aren't met.Windows 8.1 system requirements are as follows:
Processor: 1 gigahertz (GHz) or faster with support for PAE, NX, and SSE2
RAM: 1 gigabyte (GB) (32-bit) or 2 GB (64-bit)
Hard disk space: 16 GB (32-bit) or 20 GB (64-bit)
Graphics card: Microsoft DirectX 9 graphics device with WDDM driver