[Q] l7 p705 reads p700 how to restore - Optimus L3, L5, L7 Q&A, Help & Troubleshooting

hi
my device is l7 p705
i did cm 11 p700 now when i try to restore the original image by lg tool it tells me p700 how tomake it read p705 back
thanks

no one answer or even link
ioosis said:
hi
my device is l7 p705
i did cm 11 p700 now when i try to restore the original image by lg tool it tells me p700 how tomake it read p705 back
thanks
Click to expand...
Click to collapse
no one answer or even link

Is it so diffcult
ioosis said:
no one answer or even link
Click to expand...
Click to collapse
is it so diffcult

ايه ده
ولا اجابة خلتوني اكتب عربي

ولا اجابة خلتوني اكتب عربي
ioosis said:
ولا اجابة خلتوني اكتب عربي
Click to expand...
Click to collapse
ولا اجابة خلتوني اكتب عربي

"This package is for p705, this is 'u0'" "Status 7"
ioosis said:
ولا اجابة خلتوني اكتب عربي
Click to expand...
Click to collapse
Originally Posted by coolhz
This is a bit noobish , but I am getting an error when I try to Flash .zip ( I tried both of them p700 and p705) but both show error like this:
"This package is for p705, this is 'u0'"
"Status 7"
"Installation Aborted"
When I flash p705 build still I get the same error. My model number is p705 , then too because of that p705 not able to flash I tried with p700 build but same error surprisingly.
I have rooted, unlocked bootloader , flashed CWM recovery(v6.0.2.8 touch recovery).
I did everything as said in the OP's instructions.
Anybody who can help please reply fast.
Thanks in Advance.

Anybody who can help please reply fast.
ioosis said:
Originally Posted by coolhz
This is a bit noobish , but I am getting an error when I try to Flash .zip ( I tried both of them p700 and p705) but both show error like this:
"This package is for p705, this is 'u0'"
"Status 7"
"Installation Aborted"
When I flash p705 build still I get the same error. My model number is p705 , then too because of that p705 not able to flash I tried with p700 build but same error surprisingly.
I have rooted, unlocked bootloader , flashed CWM recovery(v6.0.2.8 touch recovery).
I did everything as said in the OP's instructions.
Anybody who can help please reply fast.
Thanks in Advance.
Click to expand...
Click to collapse
Anybody who can help please reply fast.

Anybody who can help please reply fast.
Anybody who can help please reply fast.

ioosis said:
no one answer or even link
Click to expand...
Click to collapse
No one is answering because they may not have your device. I have requested the mods to move your thread to the section meant for your device. Members over there could help you better. Be patient until then.

ioosis said:
Originally Posted by coolhz
This is a bit noobish , but I am getting an error when I try to Flash .zip ( I tried both of them p700 and p705) but both show error like this:
"This package is for p705, this is 'u0'"
"Status 7"
"Installation Aborted"
When I flash p705 build still I get the same error. My model number is p705 , then too because of that p705 not able to flash I tried with p700 build but same error surprisingly.
I have rooted, unlocked bootloader , flashed CWM recovery(v6.0.2.8 touch recovery).
I did everything as said in the OP's instructions.
Anybody who can help please reply fast.
Thanks in Advance.
Click to expand...
Click to collapse
***Make a copy of your Flash.zip first
one thing you can do is open the flash.zip and go to META-INF->com-> google-> android
you will see a file called updater-script
open in notepad and delete every thing thats before the word mount P.S the word mount should be in about the second line
save the new updater-scrpit and put it back in the zip folder where you found it.
now try to see if it will install

Related

Galaxy y stuck on samsung logo !!

Hey guys, i flashed somethin' called Ext4 converter on my galaxy y, it was installed successfully but when i tried to reboot my phone it didn't reboot. I'm stuck on galaxy y logo and also when i enter the recovery mode it shows some E: Can't mount /cache/recovery/log and other five errors similar to this. Plz help me
Which kernel where you on ? Before flashing ext4 converter make sure your kernel supports it !
Download stock Rom from dokys thread and flash it via Odin to revive
ubuntu #39 version 2.6.35.7
AbhiLP said:
ubuntu #39 version 2.6.35.7
Click to expand...
Click to collapse
That why its not booting up....
First flash merruk 2 final and than flash ext4 converter...
See mai77 thread in general section for the method of flashing merruk 2.5....
It will help u...
Sent from my GT-S5360 using xda app-developers app
Well, before you use ext4 converter, you must understand how it works and the things to do after/before flashing.
1)Before flashing you MUST take a nandroid backup of your rom
2) Flash ext4 converter
3) Restore system, data and cache from advanced restore
4) Flash Merruk deluxe #206 kernel or repencis v7 kernel from odin(flashing .tar) or by using mai77 method(boot.img).
Ext4 converter works(boots) only with kernels supporting ext4 , only repencis and merruk deluxe kernel support that now.
can anybody really solve my problem ?
LOL, what I posted was a solution to the problem..
Reflash to stock ROM and follow my instructions there
oops ! My bad
i'm gonna try it now.
But will it solve the cache problem ?
AbhiLP said:
oops ! My bad
i'm gonna try it now.
But will it solve the cache problem ?
Click to expand...
Click to collapse
Yes, make sure you follow those steps, if you want a more detailed explanation refer here refer to the flashing of merruk dev #206 part)
http://forum.xda-developers.com/showpost.php?p=34050866&postcount=14
If you just want your phone back to normal, reflash to stock, if you want to install merruk kernel with overclocking capability(includes ext4 converter), follow those steps there
Let me know if you have any doubts
hitme987 said:
LOL, what I posted was a solution to the problem..
Reflash to stock ROM and follow my instructions there
Click to expand...
Click to collapse
Sir after so long time u r here....
By the way happy diwali...
Sent from my GT-S5360 using xda app-developers app
Thanks and same to you bro
Flash again the Stock ROM
no work ? i dont know ?
Hey guys, sorry for late reply. My problem has been solved, i flashed stock rom via odin and everything got fixed !
Thanks everyone
Flash back to stock with Odin.
Edit: I don't read D:
AbhiLP said:
can anybody really solve my problem ?
Click to expand...
Click to collapse
flash stock rom via odin...this may help u
hi!
hitme987 said:
Thanks and same to you bro
Click to expand...
Click to collapse
ok i was jus searching overclocking in sgy Q&A forum n came upon ur replies, its says u hav hyperion 7 n undervolted n overclocked sgy...
i had tried an custom rom n den had panicked a little coz my phone wouldnt restore and then taken help from xda and flashed stock rom so i'm kind of in the 'once bitten, twice shy' phase... m a "noob" n jus wanna be careful... can you help?? hows hyperion7?? n undervoltin n overclockin?? pm me plz... thanks!!
much appreciated!!
same problem
AbhiLP said:
Hey guys, i flashed somethin' called Ext4 converter on my galaxy y, it was installed successfully but when i tried to reboot my phone it didn't reboot. I'm stuck on galaxy y logo and also when i enter the recovery mode it shows some E: Can't mount /cache/recovery/log and other five errors similar to this. Plz help me
Click to expand...
Click to collapse
hey. . .did you already fix your phone ? if yes can you help me coz i have the same problem of yours.
xedhacker said:
hey. . .did you already fix your phone ? if yes can you help me coz i have the same problem of yours.
Click to expand...
Click to collapse
sorry for being late.
You need to flash stock firmware via Odin.
Flashing your stock rom. find your stock rom on samfirmware.com and download it. :good:

[Q] cm9+sdmerged removing ( true method)

IN THE NAME OF ALLAH​
this is the topic to help for :
how can i remove cm9 with sdmerged .... i try using kdz more than time but get white screen and my e400 reset
so ... i will try every solution u say here my friends​
Napst3r88 said:
IN THE NAME OF ALLAH​
this is the topic to help for :
how can i remove cm9 with sdmerged .... i try using kdz more than time but get white screen and my e400 reset
so ... i will try every solution u say here my friends​
Click to expand...
Click to collapse
sme prblem ....anybody got solution fr dis??

[Q] Installing a custom ROM on my phone

Hello everyone. I was hoping that some of you could help me. I rooted my phone and unlocked its boot loader and I want to install a custom ROM but I have no idea how. If someone could give me a couple of links to some guides or tutorials that would be great. If you need any information about my phone I will post it as soon as I can.
taha1616 said:
Hello everyone. I was hoping that some of you could help me. I rooted my phone and unlocked its boot loader and I want to install a custom ROM but I have no idea how. If someone could give me a couple of links to some guides or tutorials that would be great. If you need any information about my phone I will post it as soon as I can.
Click to expand...
Click to collapse
install CWM and after : http://www.youtube.com/watch?v=nizW95AW_dE ( tutorial made by me)
Thank you for helping me but I have a LG Optimus L7 and your tutorial was about the LG Optimus L5. Do you have any tutorials for my phone?
taha1616 said:
Thank you for helping me but I have a LG Optimus L7 and your tutorial was about the LG Optimus L5. Do you have any tutorials for my phone?
Click to expand...
Click to collapse
the CWM is same on any device, and the installation too
I installed the Slimbean ROM on my phone and when I rebooted it, I got a blue screen and the screen went all weird now. How do I fix my phone?
i think the rom is not good, try again, wipe everything and flash it , after reboot
It worked, thank you. I installed the wrong ROM on my phone but I've installed the right one now. What is a kernel and do I need it?
taha1616 said:
It worked, thank you. I installed the wrong ROM on my phone but I've installed the right one now. What is a kernel and do I need it?
Click to expand...
Click to collapse
the rom contains the kernel
kernel = the conection between hardware and software
Do I need to install one?
taha1616 said:
Do I need to install one?
Click to expand...
Click to collapse
you already have one installed so the answer is no
Okay. Thank you very much for all the help. Can you recommend me a ROM I should install? I am currently running Slimbean 2.1 but it doesn't suit me quite well.
taha1616 said:
Okay. Thank you very much for all the help. Can you recommend me a ROM I should install? I am currently running Slimbean 2.1 but it doesn't suit me quite well.
Click to expand...
Click to collapse
try cm10.2 or 10.1

how to uninstall cwm recovery on lg g2 f320l?

hi guys , i rooted ma lg g2 korean f320l n installed cwm recovery , bt nw i wanna go back to stock recovery , please tell me hw to uninstall cwm recovery searched alot but cudnt get anywhre , im new wd these stuffs so pls tell me n details , thx :laugh:
use adb and sideload default recovery:highfive:
ForbEx said:
use adb and sideload default recovery:highfive:
Click to expand...
Click to collapse
i dono how to do it pls teme di procesure
Or you can go back to stock? Just so you know, you will lose all your data. In general section go to thread "Go back to stock"
marshygeek said:
Or you can go back to stock? Just so you know, you will lose all your data. In general section go to thread "Go back to stock"
Click to expand...
Click to collapse
i followed that but im gettin an error durin sofware upgdrade , it stops when it reaches 2% and i dont mind lossin my data i allready deleted everythin before this process
pw1nce said:
i followed that but im gettin an error durin sofware upgdrade , it stops when it reaches 2% and i dont mind lossin my data i allready deleted everythin before this process
Click to expand...
Click to collapse
This guy seems to have the same problem. http://forum.xda-developers.com/showthread.php?p=47588362
Might be your localization or OS do not like that program as well? Or the other way around...
PAGOT said:
Maybe a long shot, and I do not have the slightest idea what this about, never did it,
but since the errors are a bit of strange nature, couldn't it be something with the localization?
Lets say using Czech Language, Czech Windows, Czech Locales?
Maybe trying to use English OS, English Locales etc?
Click to expand...
Click to collapse
ForbEx said:
looool I LOVE YOUUUU:victory: I installed english W XP SP3 and IT FLASHED flawessly:highfive:
Click to expand...
Click to collapse
pw1nce said:
i followed that but im gettin an error durin sofware upgdrade , it stops when it reaches 2% and i dont mind lossin my data i allready deleted everythin before this process
Click to expand...
Click to collapse
Try the above post. Flash it in another pc with windows xp sp3.
marshygeek said:
Try the above post. Flash it in another pc with windows xp sp3.
Click to expand...
Click to collapse
i tried that but its not working either , someone sent me this link to try it , http://forum.xda-developers.com/showthread.php?t=2475045&nocache=1&nocache=1&nocache=1 , but i cant download the drivers given in the thread bacause of some korean text error when trying to download , i've cwm recovery installed , maybe i need to remove it before going back to stock , is it? and yes , my phone is currently working with the custom rom i installed
question
pw1nce said:
hi guys , i rooted ma lg g2 korean f320l n installed cwm recovery , bt nw i wanna go back to stock recovery , please tell me hw to uninstall cwm recovery searched alot but cudnt get anywhre , im new wd these stuffs so pls tell me n details , thx :laugh:
Click to expand...
Click to collapse
dude can i ask you something..how did you install cwm on your f320l and what android version and sofware version is your phone when you installed it..need your answer..thanks

[Q] HELP! Lgl22 root, model information check fail!!

Hi everyone! I'm new on xda, I really need help please.
I'm using an LG l22 isai, I have updated to android 4.4.2 v20b, now I am trying to root the device but I have an error. LG flash tools says "Model information check fail". Does anyone knows how to fix it? is there any dll file that bypass the verification and goes straight to the flashing? please help.
cp3junior said:
Hi everyone! I'm new on xda, I really need help please.
I'm using an LG l22 isai, I have updated to android 4.4.2 v20b, now I am trying to root the device but I have an error. LG flash tools says "Model information check fail". Does anyone knows how to fix it? is there any dll file that bypass the verification and goes straight to the flashing? please help.
Click to expand...
Click to collapse
Hello, see this link for the full thread for Isai L22 LG
http://forum.xda-developers.com/showthread.php?t=2685517
It also has 2 guides to root for 4.2.2 and 4.4.2. Try the dll file mentioned in those guides.
Also Next time ask your Questions in the Q&A forum.
wulsic said:
Hello, see this link for the full thread for Isai L22 LG
http://forum.xda-developers.com/showthread.php?t=2685517
It also has 2 guides to root for 4.2.2 and 4.4.2. Try the dll file mentioned in those guides.
Also Next time ask your Questions in the Q&A forum.
Click to expand...
Click to collapse
Hi, thanks very much for your help, I've been reading this thread but no one has the same problem. That's why I made a new thread. Anyway thanks for your help.
cp3junior said:
Hi, thanks very much for your help, I've been reading this thread but no one has the same problem. That's why I made a new thread. Anyway thanks for your help.
Click to expand...
Click to collapse
Ahh okay, Did you use the same Dll in the Guide?
wulsic said:
Ahh okay, Did you use the same Dll in the Guide?
Click to expand...
Click to collapse
Yes I did, but it doesn't work for me.
@cp3junior ahh I will try to find a fix for you
wulsic said:
@cp3junior ahh I will try to find a fix for you
Click to expand...
Click to collapse
Very very big thanks for your help. :good:
cp3junior said:
Very very big thanks for your help. :good:
Click to expand...
Click to collapse
try these things, this is just an quote of what I have found,
USB cable is not broken? Are you connected?
· Do you have installed the driver?
· DLL or thing that is compatible with the tot you are using?
· Flash Tool Are you running with administrator privileges? (You can run as an administrator by right-clicking)
Do you put in · Download Mode? You may have already confirmed, but please try to check the above points.
Somebody with the same problem as you said that he fixed it with replacing his usb cable.
wulsic said:
try these things, this is just an quote of what I have found,
USB cable is not broken? Are you connected?
· Do you have installed the driver?
· DLL or thing that is compatible with the tot you are using?
· Flash Tool Are you running with administrator privileges? (You can run as an administrator by right-clicking)
Do you put in · Download Mode? You may have already confirmed, but please try to check the above points.
Somebody with the same problem as you said that he fixed it with replacing his usb cable.
Click to expand...
Click to collapse
I double checked all of that, I re-downloaded all the files to make sure that the files are not broken or something, I run everything as admin but still no result, same problem .. it says "model information check fail".
Hmm even with another cable it fails but you can still boot normally into the android os right? Sorry if I am also giving some reactions a bit later but your problem only have a couple people with lots of time no reply or good answer. I am now busy with studying for 3 tests next week so when I am done then I will search more for you alright?
wulsic said:
Hmm even with another cable it fails but you can still boot normally into the android os right? Sorry if I am also giving some reactions a bit later but your problem only have a couple people with lots of time no reply or good answer. I am now busy with studying for 3 tests next week so when I am done then I will search more for you alright?
Click to expand...
Click to collapse
yes I can boot into the os but can't root it. good luck for all your tests, I hope you can find any solution later. I'll search more on google if I can find any solution.

Categories

Resources