Database Users

HELP!!

So I recently rooted my LTE Tab 10.1 after some errors on my part. I finally got root, and the bootloader unlocked (thanks to six5alive's post here) Here's what I have:
CWM recovery
unlocked bootloader
Rom Manager installed
SU permissions
I've tried flashing two different ROMs, and both flash without a problem. But when I attempt to reboot, I get the Samsung logo and a yellow triangle below it, and then the tablet shuts down. At first I thought it was just the ROM, but after flashing two, I'm getting suspicious. I have a Nandroid backup of the stock rooted ROM, and that restores & boots properly every time.
What am I doing wrong?

You might have root but from the sounds of it the tab does not like the insecure kernel hence the yellow triangle on the logo screen. On a tab, I am not sure how to get around this.
Why not run stock and use TiBu to get rid of the bloatware until you can find a solution? Keep a Nandroid of bone stock then another for your custom settings...

Mardenator said:
So I recently rooted my LTE Tab 10.1 after some errors on my part. I finally got root, and the bootloader unlocked (thanks to six5alive's post here) Here's what I have:
CWM recovery
unlocked bootloader
Rom Manager installed
SU permissions
I've tried flashing two different ROMs, and both flash without a problem. But when I attempt to reboot, I get the Samsung logo and a yellow triangle below it, and then the tablet shuts down. At first I thought it was just the ROM, but after flashing two, I'm getting suspicious. I have a Nandroid backup of the stock rooted ROM, and that restores & boots properly every time.
What am I doing wrong?
Click to expand...
Click to collapse
What roms did u flash...?
Sent from my GT-P7500 using XDA App

Strange, when I flashed the ISI-Galaxy rom on my P7100 i got then same thing as you, when i turned the device off it automatically went back on with the same result. I had the idea that i was going to have to bring it back to the shop for repairs but... This happened while i was at work. So i placed the Tab in my backpack but when i got home a half an hour later the device was functioning again. So maybe yours needs some time to get over this 'boot up'.

ZangetsuNX-01 said:
Strange, when I flashed the ISI-Galaxy rom on my P7100 i got then same thing as you, when i turned the device off it automatically went back on with the same result. I had the idea that i was going to have to bring it back to the shop for repairs but... This happened while i was at work. So i placed the Tab in my backpack but when i got home a half an hour later the device was functioning again. So maybe yours needs some time to get over this 'boot up'.
Click to expand...
Click to collapse
Tried this, got the same result I've been getting..

I flashed these, wiped after flashing each one obviously.
http://forum.xda-developers.com/showthread.php?t=1372432
and
http://forum.xda-developers.com/showthread.php?t=1155023
Both caused the triangle issue, so I just restored the rooted stock ROM I'm running.

Mardenator said:
I flashed these, wiped after flashing each one obviously.
http://forum.xda-developers.com/showthread.php?t=1372432
and
http://forum.xda-developers.com/showthread.php?t=1155023
Both caused the triangle issue, so I just restored the rooted stock ROM I'm running.
Click to expand...
Click to collapse
Next time please use the edit button.
I think I have an explanation as to why its crashing. The ISI-Galaxy Rom and P7500XWKK4 Galaxy Tab 10.1 / HC 3.2 ROM are for the P7100 model. Yours is the SCH-I905 model so the roms you tried to flash are incompatible.

Just realized that ZangetsuNX-01 is right, I've been flashing WiFi-only ROMs, not ROMs for the Tab 10.1 LTE. Downloading http://forum.xda-developers.com/showthread.php?p=17858660#post17858660 now, will flash and post results here asap.

UPDATE: got a leaked TW ROM to install via Odin and boot, posting this from the tablet. Added a screenshot for kicks.

BTW, for anyone with an LTE Tab, flash this via ODIN NAO!!!!
http://rootzwiki.com/topic/10463-ro...x-leak-build-for-vzw-galaxy-tab-101-lte-only/
It's unrooted, with stock recovery, but you can follow the directions on the page to get root, it's simple. Just Odin a recovery .tar file, go to recovery, flash SU zip, and voila. Running it at 1.4GHz max, 1GHz min, and it's awesome. TouchWiz is also a nice step up from stock HC.

@Mardenator
your screenshot a looke liek from my adwluncher from my tab...

Lol I'm using ADW Ex.

ok i dont untersant waht you with them post, sorry.

Conan179 said:
ok i dont untersant waht you with them post, sorry.
Click to expand...
Click to collapse
I'm not sure what the question here is, but I was suggesting that if you have an LTE Galaxy Tab 10.1, you should flash the ROM that I provided a link to. It's a good ROM, and I've been running it for 2 days now.

Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General

[Q] Stuck on custom screen after ODIN?

Hey guys,
I flashed back to stock with ODIN. Everything passes. But when the phone reboots it comes up with Samsung custom logo and seems to get stuck there? Any ideas?
EDIT: this is the ATT I337, I have flashed with ODIN before and it worked out fine. I am doing everything I normally did.

evolution2012 said:
Hey guys,
I flashed back to stock with ODIN. Everything passes. But when the phone reboots it comes up with Samsung custom logo and seems to get stuck there? Any ideas?
EDIT: this is the ATT I337, I have flashed with ODIN before and it worked out fine. I am doing everything I normally did.
Click to expand...
Click to collapse
Have you made any changes since you last used ODIN? Did you flash a different version? How long are you waiting?

hamzer11 said:
Have you made any changes since you last used ODIN? Did you flash a different version? How long are you waiting?
Click to expand...
Click to collapse
I waited like 3 minutes or so. But it never passes the custom Samsung screen at boot. Maybe I need to give it more time? I flashed Loki and I installed slimbean. Slimbean was a little buggy as it is still in beta so I went to restore my recovery. My recovery was missing from TWRP so I tried flashing back to stock odin to start over from square one.
I am using ODIN 3.07 on a PC running Windows 8. If I find out that all i have to do is wait longer I am gonna feel like an idiot lol.

evolution2012 said:
I waited like 3 minutes or so. But it never passes the custom Samsung screen at boot. Maybe I need to give it more time? I flashed Loki and I installed slimbean. Slimbean was a little buggy as it is still in beta so I went to restore my recovery. My recovery was missing from TWRP so I tried flashing back to stock odin to start over from square one.
I am using ODIN 3.07 on a PC running Windows 8. If I find out that all i have to do is wait longer I am gonna feel like an idiot lol.
Click to expand...
Click to collapse
Initial boots can be long but I don't know about more than 3 minutes? Not really sure about what happens if you ODiN back after TWRP? I'll let more technical folks take a stab at it. It can't hurt to wait though.

Well I don't know what was ailing the odin flash, but I just used Kies emergency recovery and all is fine now. Weird... Appreciate your help.

evolution2012 said:
Well I don't know what was ailing the odin flash, but I just used Kies emergency recovery and all is fine now. Weird... Appreciate your help.
Click to expand...
Click to collapse
Question for you, does recovering this way wipe everything? Apps, root, settings, all mods? Just want to know for my own reference.

hamzer11 said:
Question for you, does recovering this way wipe everything? Apps, root, settings, all mods? Just want to know for my own reference.
Click to expand...
Click to collapse
This was my first time ever using KIES recovery. As far as I could tell everything is wiped. I did a factory reset afterwards just to be safe so I can't say with 100% certainty. I had the custom logo after reboot for 10 seconds, then after a manual reboot it boots regularly without the custom logo.

Phone stuck on "Samsung - Custom" screen after creating TWRP backup. Help please?

Phone stuck on "Samsung - Custom" screen after creating TWRP backup. Help please?
I have an ATT S4, that has had CM 10.1 on it running flawlessly pretty much since nightlies started to get released. Decided to try going back to some TW based ROMs. Running the latest nightly, loaded up TWRP, created a backup, as I usually do before swapping roms. Created the backup fine, now it won't boot, it just sits at the Samsung screen with the lock and Custom message. Wiped cache\dalvic, even tried restoring from the backup I just created. Nothing. Tried it with the phone plugged into the computer and without being plugged in (I think I recall it being plugged into USB could cause issues in the past), and still nada. Tried pulling the battery and rebooting about 10 times. Can get into recovery and odin mode perfectly fine still. Any suggestions or ideas? Thanks

Simonzi said:
I have an ATT S4, that has had CM 10.1 on it running flawlessly pretty much since nightlies started to get released. Decided to try going back to some TW based ROMs. Running the latest nightly, loaded up TWRP, created a backup, as I usually do before swapping roms. Created the backup fine, now it won't boot, it just sits at the Samsung screen with the lock and Custom message. Wiped cache\dalvic, even tried restoring from the backup I just created. Nothing. Tried it with the phone plugged into the computer and without being plugged in (I think I recall it being plugged into USB could cause issues in the past), and still nada. Tried pulling the battery and rebooting about 10 times. Can get into recovery and odin mode perfectly fine still. Any suggestions or ideas? Thanks
Click to expand...
Click to collapse
There are no less than a dozen similar threads about similar problems already. Have you looked at those threads for a possible solution yet? You can find them by using the search function or better yet just doing a visual search of the first few pages of the "General" and "Q&A" sections. Good luck.

Sounds like a ROM and kernel issue. Try flashing a ROM with a loki'd kernel.
Tylorw1
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4

Tylorw1 said:
Sounds like a ROM and kernel issue. Try flashing a ROM with a loki'd kernel.
Tylorw1
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
I don't see how that could be the case. I didn't flash anything. I just loaded TWRP, created a backup, and rebooted my phone. No ROM\kernel change. Nothing more than creating a backup in TWRP.
scott14719 said:
There are no less than a dozen similar threads about similar problems already. Have you looked at those threads for a possible solution yet? You can find them by using the search function or better yet just doing a visual search of the first few pages of the "General" and "Q&A" sections. Good luck.
Click to expand...
Click to collapse
I tried searching, the closest one I could find on the first few pages was this one. I just didn't see any specific to my situation because nothing was flashed. Like my response to Tylorw1, all I did was boot into recovery, create a backup, and reboot my phone. Didn't flash a ROM, change a kernel, format anything, etc...

I has this same problem... It happened after every single reboot after flashing various ROMs or anything.. I gave up and went back to CWM and haven't had the problem since :good:
Sent from my SGH-I337 using xda app-developers app

Simonzi said:
I have an ATT S4, that has had CM 10.1 on it running flawlessly pretty much since nightlies started to get released. Decided to try going back to some TW based ROMs. Running the latest nightly, loaded up TWRP, created a backup, as I usually do before swapping roms. Created the backup fine, now it won't boot, it just sits at the Samsung screen with the lock and Custom message. Wiped cache\dalvic, even tried restoring from the backup I just created. Nothing. Tried it with the phone plugged into the computer and without being plugged in (I think I recall it being plugged into USB could cause issues in the past), and still nada. Tried pulling the battery and rebooting about 10 times. Can get into recovery and odin mode perfectly fine still. Any suggestions or ideas? Thanks
Click to expand...
Click to collapse
what version of twrp? if it is 2.6.?.? then get off of it, also, what I did was pull battery for 3min, it booted fine....go back to early version of twrp...

STVERDI said:
I has this same problem... It happened after every single reboot after flashing various ROMs or anything.. I gave up and went back to CWM and haven't had the problem since :good:
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I've wanted to go back to CWM. That's what I had on my S3. Only thing stopping me, is all my nandroid backups for my S4 are done with TWRP, and I don't want to run into a situation where I need them, and them not being compatible
TheAxman said:
what version of twrp? if it is 2.6.?.? then get off of it, also, what I did was pull battery for 3min, it booted fine....go back to early version of twrp...
Click to expand...
Click to collapse
Nope, still on 2.5.0.2. Finally, after a third complete wipe/format and restore from the back I had created (the one that started the whole issue), it works fine. Such a huge pain in the ass.

a user had to boot back into twrp and wipe data/factory reset yesterday to fix this issue.

Simonzi said:
I've wanted to go back to CWM. That's what I had on my S3. Only thing stopping me, is all my nandroid backups for my S4 are done with TWRP, and I don't want to run into a situation where I need them, and them not being compatible
Nope, still on 2.5.0.2. Finally, after a third complete wipe/format and restore from the back I had created (the one that started the whole issue), it works fine. Such a huge pain in the ass.
Click to expand...
Click to collapse
And you have to be ****ing kidding me. I rebooted into recovery while typing my initial response, just to verify I was still on the 2.5.x.x TWRP. Booted up TWRP, verified that, choose "Reboot System", and same thing. Back to sitting at the Samsung screen. Nandroid backups or not, ditching TWRP as soon as I get it able to boot back up.

Even worse off now than when I started. After my last post, where my phone was doing the same "stuck on Samsung logo" thing, just from booting into TWRP, I decided to swap to a different recovery. Searched for "switch from TWRP to CWM", and found my own post I had made a few months ago, but never went through.
Following those instructions now, I decided on the PhilZ CWM. Head over to that thread, grab the loki'd zip, load up TWRP, and flash the zip. Now I can't even boot into recovery!! It just freezes on the Samsung screen with the blue "recovery booting" text.
Can still get into download mode, so I tried using ODIN to flash PhilZ jflteatt.tar.md5 file, and it fails.
At this point, waiting for the stock 1.6 firmware package to download, so I can just ODIN that.
If anyone has any other suggestions though, they'd be great. Have an hour to try while waiting for that to download

somebody had mentioned this...
http://forum.xda-developers.com/showpost.php?p=44629460&postcount=8
make sure you have the correct firmware and proceed as you are. likely your best bet.

Simonzi said:
Even worse off now than when I started. After my last post, where my phone was doing the same "stuck on Samsung logo" thing, just from booting into TWRP, I decided to swap to a different recovery. Searched for "switch from TWRP to CWM", and found my own post I had made a few months ago, but never went through.
Following those instructions now, I decided on the PhilZ CWM. Head over to that thread, grab the loki'd zip, load up TWRP, and flash the zip. Now I can't even boot into recovery!! It just freezes on the Samsung screen with the blue "recovery booting" text.
Can still get into download mode, so I tried using ODIN to flash PhilZ jflteatt.tar.md5 file, and it fails.
At this point, waiting for the stock 1.6 firmware package to download, so I can just ODIN that.
If anyone has any other suggestions though, they'd be great. Have an hour to try while waiting for that to download
Click to expand...
Click to collapse
Stock 1.6 firmware package?
Make sure you get the correct firmware? Go to SamMobile and get the stock firmware from there or go to Adam Outlers "Stock firmware ODIN" thread in the General section (the AMDL firmware link is in that thread you just have to look for it).

scott14719 said:
Stock 1.6 firmware package?
Make sure you get the correct firmware? Go to SamMobile and get the stock firmware from there or go to Adam Outlers "Stock firmware ODIN" thread in the General section (the AMDL firmware link is in that thread you just have to look for it).
Click to expand...
Click to collapse
Yeah, I meant 1.6gb firmware package. Just forgot the "gb". That's what I'm currently downloading, but trying to recover it with Kies while waiting.

I would like to report I had the same problem.
After changing roms and making a nandroid, and then deciding to switch roms again, I ran into the stuck at Samsung Custom with a lock boot screen. Most roms would boot up once, but a restart or power down would lead to being stuck. I was flashing through TWRP.
I went into TWRP and flashed OUDHS recovery which overrode TWRP and wiped/flashed through OUDHS a new rom.
Problem solved.

S3 at&t stuck in TWRP booting screen.
xBeerdroiDx said:
a user had to boot back into twrp and wipe data/factory reset yesterday to fix this issue.
Click to expand...
Click to collapse
Im new to custom roms, I pressed ok for an update on my phone, after the update was complete my phone shut off and booted into TWRP and now I can't get back to my android screen nor make calls etc. HELPPPPPPPP PLEASSSSSEE I have been trying to fix my phone since july and I have been using this cheap phone that don't even get internet. I have an S3 1747 at&t

Lnjames said:
Im new to custom roms, I pressed ok for an update on my phone, after the update was complete my phone shut off and booted into TWRP and now I can't get back to my android screen nor make calls etc. HELPPPPPPPP PLEASSSSSEE I have been trying to fix my phone since july and I have been using this cheap phone that don't even get internet. I have an S3 1747 at&t
Click to expand...
Click to collapse
Wrong forum. Please go to the s3 section with your question.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

Had this problem just now, solved it by fixing permissions.

I am running an MDL based S4, and screwed the pooch. I was going to wipe the internal storage and made the mistake of doing it through TWRP 2.5. Now, I have the same problem of being stuck on the custom boot screen. I have tried to change from TWRP to OUDHS Recovery, but still boot loops to Custom screen. I have tried fresh installs of 4.2 ROMs and 4.4.2 Google Editions. Do I need to flash via ODIN?
Flame away....I know better than this!!!!
Help would be greatly appreciated.
Sent from my GT-N8013 using Tapatalk 4

i need pro help. i think i bricked my phone

sph-l720 4.3 rooted by cf auto root
I put system files in the phones framework folder to hack free hotspot. I rebooted and the phone was stuck on the yellow sprint logo. I pulled the battery and used odin to i guess flash mf9, then cf auito root. last time i was stuck on this screen this worked.
But now i'm screwed.
I tried a wipe factory reset and it still didn't help.
I flashed a kernel zip file using odin by accident (KERNEL - SPR _ L720vpuamf9-1372121308)
now it boots and gets stuck at the same screen but the screen is blank. only the blue light lights up.
any clues???
now it says set warranty bit kernel, when it used to say set warranty bit recovery

You cannot go back with Odin to MF9 once you are on MjA.
Sent from my SPH-L720 using Tapatalk

.....
EDIT NEVER MIND I didn't see that first part about 4.3!
Hello Sprint I've got a TEP claim for you.
Okay well maybe not totally there yet. There are a couple threads on how to get 4.3 to boot do spend some time searching reading, and then read and look some more. Good place to start would be here

brewmanate said:
sph-l720 4.3 rooted by cf auto root
I put system files in the phones framework folder to hack free hotspot. I rebooted and the phone was stuck on the yellow sprint logo. I pulled the battery and used odin to i guess flash mf9, then cf auito root. last time i was stuck on this screen this worked.
But now i'm screwed.
I tried a wipe factory reset and it still didn't help.
I flashed a kernel zip file using odin by accident (KERNEL - SPR _ L720vpuamf9-1372121308)
now it boots and gets stuck at the same screen but the screen is blank. only the blue light lights up.
any clues???
now it says set warranty bit kernel, when it used to say set warranty bit recovery
Click to expand...
Click to collapse
Flash KT kernel 4.3 if you are on mja, that should fix it, if not, make sure you have a custom recovery(not TWRP) and flash the stock 4.3 rom in the dev section

thank you...
negamann303 said:
Flash KT kernel 4.3 if you are on mja, that should fix it, if not, make sure you have a custom recovery(not TWRP) and flash the stock 4.3 rom in the dev section
Click to expand...
Click to collapse
i just have to get it replaced.
I never fully rooted. I had stock recovery and binary ond kernel. I just has su.
I screwed the pooch on this one. Thanks anyway guys. I will get a new one. Or maybe a note 3 in its place. What do you think?

If you can get to download mode it's not bricked
Sent from my SPH-L720 using Tapatalk

Your not bricked
This is exactly the same issue I had. You tried to downgrade after upgrading and flashed some stuff to fix it right? Yeah bad idea. Anyway.
Go to this thread http://forum.xda-developers.com/showthread.php?t=2506562
Follow it step by step. It solved my issues.

I already sent it out to be replaced
I have insurance through a 3rd party, so it might be forgiven that I rooted it. If not, and they send it back to me, I will have to rely on all your helpful guidance. I am very grateful. You guys rock.
Just so its as clear as can be, here is a list of my mistakes. LOL
1. I did try to take the OTA update. It didnt take and only messed with storage for some reason. Not broke yet.
2. Flashed back to MF9 with Odin 3 v.1.87. Oops.
3. Flashed MF9 and CF auto root a few times back and forth trying to get it to take.
4. It is a bit hazy here, but I tried to use odin 3.07 to go back to mf9, but it wouldn't work. I instead used odin to root the f#cker and to my amazement it worked. Now I was rooted on 4.3! MJA I got the idea from this thread>>>>>>>>http://forum.xda-developers.com/showthread.php?t=2511209
5. Then it was all gravy for a few days minus the annoying security notifications every so often about an app trying to access the system..blah blah blah. I wanted my hotspot hack back (the entire reason for the root) so I placed the altered system files in the framework to allow for hotspot service
and rebooted. Thats when **** got real. it booted up to the full yellow screen that shows the sprint logo. The blue led was strobing slowly and it just stayed that way for a few minutes. I got scared and tried going through steps 1 through 4 again to no avail.
6. Then I really messed up and flashed the MF9 Kernel zip file by mistake or maybe more out of desperation, and all that did was make the screen black after the samsung logo, but the blue led still illuminated.
All well, I already sent it out. I should get a new one soon.
If they dont let me swap it I will upgrade to the note 3.
Any ideas about the note 3 vs the sgs4, except for the obvious size and Ghz difference?

Cannot Install Any ROMS apart from BlissPop

Hi all Im a noob so apologies in advance as its the first time Ive rooted and used custom ROMS.
I rooted my phone a couple of months ago using ODIN, then successfully installed CM12.1 but found that this started to slow down and not perform well after a few weeks so I looked for other ROMs. In the end I installed BlissPop which is based on CM. This generally works really well but the software has been a big buggy as well with yesterday my main screen going black and not able to use the phone.
So ive been trying to install a different ROM and even tried to go back to the stock S5 firmware as i miss the camera in the stock firmware.
Now to install the ROMs Ive tried using CWM and TWRP with the same results.
Yesterday I tried to install The Galaxy Project ROM and the Stock Samsung ROM and in both cases made sure 100% i was using the correct version for my SM G900F .
What seems to happen is that it goes through the install process and says completed but when it boots it sits on the initial Samsung S5 boot screen and goes nowhere.
Since I rooted my phone on start up at this intial boot screen I get the below 2 messages at the top of the screen
Kernel is not seandroid enforcing
Set Warranty Bit Kernel
I'd like to add my phone is also encrypted as i had to encrypt it in order to use my gmail for work.
The only ROM that seems to work is BlissPop, i remember a message during installation of this ROM along the lines of "this install is block based" if that makes any sense.
Last week when i tried to install a new ROM on several occasions the phone would get to the first screen where it would ask me to unlock the phone but I would NOT be able to use the keyboard as no keyboard would appear.
This is driving me nuts so I really could do with some help please
Thanks Bart

Flash stock, boot into recovery, factory reset, see if it boots

just so im clear
do you mean
flash stock - via cwm or twrp in recovery
reboot into recovery
factory reset at this point
see if it boots?

bartjunited said:
just so im clear
do you mean
flash stock - via cwm or twrp in recovery
reboot into recovery
factory reset at this point
see if it boots?
Click to expand...
Click to collapse
You can't flash stock from recovery, you flash stock with ODIN - if you can flash it from recovery, it's not stock
Latest G900F Lollipop Stock ROM (BTU United Kingdom)
Code:
https://mega.nz/#!fVhhzRBC!A79uC8Fgg1mGCZOaujQCzBxcUUN9z_ctVVkigD8ffVM
Then boot into recovery and factory reset

ok well that could be my probllem
never flashed stock rom thru odin
do i set phone to download as normal , connect phone to pc and choose AP option in ODIN?
downloading the stock rom you sent a link for too

Yep, AP or PDA section in ODIN, same download mode method as anything else in ODIN

I assume that I don't need to extract the zip file and just select it to flash
Sent from my Samsung Galaxy S5 using xda-developers.com, powered by appyet.com

bartjunited said:
I assume that I don't need to extract the zip file and just select it to flash
Sent from my Samsung Galaxy S5 using xda-developers.com, powered by appyet.com
Click to expand...
Click to collapse
Yea, extract it, it needs to be .MD5
G900FXXU1BOJ1_G900FOXA1BOJ1_G900FXXU1BOJ1_HOME.tar.md5
.ZIP is for recovery flashing

Boy I'm making all the noob mistakes aren't I
??????
Sent from my Samsung Galaxy S5 using xda-developers.com, powered by appyet.com

Don't worry, we all learned from somewhere - as long as you ask before jumping in and bricking things, it's all good

Thanks appreciated
A side question but you can tell me to get lost if I'm taking the piss
I've got multiple g mail accounts, is there a file anywhere that saves all the credentials so that when I have to rebuild my phone for the umpteenth time I can restore this and not have to set each one up
Sent from my Samsung Galaxy S5 using xda-developers.com, powered by appyet.com

bartjunited said:
Thanks appreciated
A side question but you can tell me to get lost if I'm taking the piss
I've got multiple g mail accounts, is there a file anywhere that saves all the credentials so that when I have to rebuild my phone for the umpteenth time I can restore this and not have to set each one up
Sent from my Samsung Galaxy S5 using xda-developers.com, powered by appyet.com
Click to expand...
Click to collapse
If you have Google Backup enabled, it should restore your accounts and stuff once you log back into the main Google account your phone was logged into before you wiped/reset/reflashed I would assume (Not used it though)

arghhh bugger
so it seems to have flashed the rom correctly and booted.
however after boot as my phone is encrypted it asks me for my password to unlock the phone.
i put in my correct password but it doesnt accept it.
going round in circles - what can i do?
rebooted info recovery and factory reset it
now im in and looks like back to stock
will keep you posted

Im finally back in now
Thanks so much for your help
hopefully this runs better than the last stock rom as it started to seriosuly slow down hence looking at other roms

Good job