Related
Now that CM10.2 nightlies are available for Nook HD and HD+, I am opening this thread as a place to discuss common issues people may face when migrating to 10.2.
I am watching a lot of people posing the same questions time and again on the development thread, so this thread will provide people to share issues and find solutions to their common problems.
I updated to CM 10.2 after a dirty install on 10.1. I immediately regretted the decision.
1) The market would fail to download or update any apps giving [RPC:S-5:AEC-0] error. This issue arises, I believe, because the identity of the device has changed. People have suggested that clearing the cache (setting>storage>cache) and removing and adding your Google Account solves this problem. In my case, at least, it did not solve the problem but I will not stop anyone from trying it, as it is much quicker than the solution to this problem.
2) Clock and Google Music would crash.
So here is what I suggest
CLEAN INSTALL CM10.2 to avoid any problems.
3) I have been using this version of GAPPS
http://forum.xda-developers.com/showthread.php?t=2378992
[courtesy of johje] and have not had any problems with it (except two clock icons in apps which I can live with)
4) Superuser still does not work with 4.3. You have to download this version from
http://forum.xda-developers.com/showthread.php?t=1538053&page=350
[Thanks Sherip for suggesting this solution]
before you could use adaway or Titanium back
5) [Resolved] Lock Screen slider positions does not work. Even if you add or remove shortcuts, your preferences will not be saved.[Edit: After a couple of restarts, now I can see a save button on top, Before that it only showed the reset button.]
6) Finally, for the first few hours after the install, the tablet was excruciatingly slow. so slow that I wanted to go back to 4.2. I think it was because of all the background Google processes and after the first few hours, the tablet is much more responsive now.
I will add more issues here once I found them. Please feel free to share, discuss and find solutions to your common CM10.2 issues.
---
Deafcyclist said:
Sorry if this is a noobish question but what can I do to make a 'clean' install? Just wipe data/factory reset? what other thing I can wipe to 'clean' it up further? Is it possible to completely remove the previous CM for a clean slate install?
thanks.
Click to expand...
Click to collapse
That's what I did. I spent around six hours trying to fix a dirty install over CM10.1. The dirty install preserves your apps and settings (if it works). However, I would suggest that you update your backup (using Titanium Backup or any backup app you use) and then wipe data/factory reset before installing CM10.2. I installed CM10.2 img, gapps and Superuser zip together and restored most of my apps and settings within the first hour.
Deafcyclist said:
Sorry if this is a noobish question but what can I do to make a 'clean' install? Just wipe data/factory reset? what other thing I can wipe to 'clean' it up further? Is it possible to completely remove the previous CM for a clean slate install?
thanks.
Click to expand...
Click to collapse
Make sure you also clear dalvik cache, battery stats and format internal sd. And please don't restore apps from Titanium Backup
---------- Post added at 05:38 PM ---------- Previous post was at 05:32 PM ----------
I installed 10.2 dirty but everything seems to work fine.
Try Greenify donated version it allows you to hibernate system apps to free up RAM
---
kareinanikko said:
Make sure you also clear dalvik cache, battery stats and format internal sd. And please don't restore apps from Titanium Backup
---------- Post added at 05:38 PM ---------- Previous post was at 05:32 PM ----------
I installed 10.2 dirty but everything seems to work fine.
Try Greenify donated version it allows you to hibernate system apps to free up RAM
Click to expand...
Click to collapse
I personally do not think that restoring user apps from Titanium backup will do any harm to your system. I know that it also backups system apps and settings which should not be transferred to CM10.2 but user apps, e.g., Facebook can safely be restored from backup. Just make sure that you have updated the latest version of your apps or else you may have to update them immediately in Play store. Even then, you retain all your settings which is important for me.
Though I have not yet installed 10.2
I really appreciate you starting this thread so I know what I'm in for when I do.
Thanks for the info. Since the only issue I have is some lag that is likely more hardware than software related and one game "Vice City" not working, I will pass for now. Can not be bothered starting from scratch with over 200 apps and about 17GB in total size. Not seeing the value-add in relation to current performance. Comics, video, browsing, emulators, games and Flash all perform fine. A little UI and app start lag seems the lesser of the "evils". Especially since I doubt software can compensate for a 4470 with 760mb of free ram and a older gpu pushing a 1080p display. The lower res Nook has none of the lag and is quite zippy. Only real difference is less than half the pixles to push.
Seems likely I could go through the effort and still have the lag. Added: I am tired of that word "lag". I prefer the "L" word.
rushless said:
Thanks for the info. Since the only issue I have is some lag that is likely more hardware than software related and one game "Vice City" not working, I will pass for now. Can not be bothered starting from scratch with over 200 apps and about 17GB in total size. Not seeing the value-add in relation to current performance. Comics, video, browsing, emulators, games and Flash all perform fine. A little UI and app start lag seems the lesser of the "evils". Especially since I doubt software can compensate for a 4470 with 760mb of free ram and a older gpu pushing a 1080p display. The lower res Nook has none of the lag and is quite zippy. Only real difference is less than half the pixles to push.
Seems likely I could go through the effort and still have the lag. Added: I am tired of that word "lag". I prefer the "L" word.
Click to expand...
Click to collapse
I would say this upgrade is worth the hassle to go through a fresh install. My main motivation to upgrade to 10.2 was the presence of TRIM support which both increase the responsiveness and life of emmc. I have read [Leapliner] the trim app some people installed in 10.1 bricked their tablets so upgrading was the only option. If you make an update of your user apps, a fresh install will take less than an hour. Also make sure to take a nandroid backup. Even if something goes wrong, you can have your old setup back in a flash.
Dirty Install
excalibar001 said:
Now that CM10.2 nightlies are available for Nook HD and HD+, I am opening this thread as a place to discuss common issues people may face when migrating to 10.2.
I am watching a lot of people posing the same questions time and again on the development thread, so this thread will provide people to share issues and find solutions to their common problems.
I updated to CM 10.2 after a dirty install on 10.1. I immediately regretted the decision.
Click to expand...
Click to collapse
I did a dirty update, but my results were largely different from yours.
1) Superuser works for me.
2) You used the old gapps (20130726), and I used the new (20130813) so I had no issues with the play store.
3) It was really laggy until I discovered that it only seems to like ( on my tablet anyway ) the ondemand governor with the cfq scheduler.
I have lost a few apps/widgets, but nothing that I miss so far ( stuff like 'Temp + Cpu v2 ), but it screwed up gl to sd until I manually edited its .xml file.
I update to 10.2 20130814 from 10.1 20130813, and it seems to be working but I have a lot more live testing to do...
RageAgain said:
I did a dirty update, but my results were largely different from yours.
1) Superuser works for me.
2) You used the old gapps (20130726), and I used the new (20130813) so I had no issues with the play store.
3) It was really laggy until I discovered that it only seems to like ( on my tablet anyway ) the ondemand governor with the cfq scheduler.
I have lost a few apps/widgets, but nothing that I miss so far ( stuff like 'Temp + Cpu v2 ), but it screwed up gl to sd until I manually edited its .xml file.
I update to 10.2 20130814 from 10.1 20130813, and it seems to be working but I have a lot more live testing to do...
Click to expand...
Click to collapse
That's good info to have. I'll try ondemand with cfq scheduler, and see if that helps. The only thing I noticed was that it was "slightly" slower than the 10.1 version. But not horribly so. I'll give this a try and see if it helps.
My stable pre 10.2 nightly salutes all of you folks that jumped in!
I will remain peaking out of a bunker, twenty fathoms below sea level until a common trend of opinion is it is worth it- not seeing that yet.
Unless lag free, I see no reason to take the six hours (really) to download and set-up everything again. 272 apps at 17GB total. So far, some state it is
actually slower and some say faster- net result though at this point seems a net wash.
bpaulien said:
That's good info to have. I'll try ondemand with cfq scheduler, and see if that helps. The only thing I noticed was that it was "slightly" slower than the 10.1 version. But not horribly so. I'll give this a try and see if it helps.
Click to expand...
Click to collapse
That is how I feel too. It is slower but not enough to make me migrate back.
rushless said:
My stable pre 10.2 nightly salutes all of you folks that jumped in!
I will remain peaking out of a bunker, twenty fathoms below sea level until a common trend of opinion is it is worth it- not seeing that yet.
Unless lag free, I see no reason to take the six hours (really) to download and set-up everything again. 272 apps at 17GB total. So far, some state it is
actually slower and some say faster- net result though at this point seems a net wash.
Click to expand...
Click to collapse
stable? you have a stable build? my 10.1 reboots at the worst times
The nightly just before 10.2 version has had zero reboots for me and very low battery bleed in standby. Not seeing how 10.2 is worth it ATM since for every person raving, another is either having issues, or a slightly slower device. This does not include folks that installed over 10.1 rather than start from scratch.
Looking forward to 10.2 with feedback that is more favorable for performance to offset my apathy for starting from scratch.
rushless said:
Looking forward to 10.2 with feedback that is more favorable for performance to offset my apathy for starting from scratch.
Click to expand...
Click to collapse
Understandable. I am not having the same slowdowns and lag that occurred with the 20130814 now that I have updated to the 20130815 of the 10.2. Much smoother and more responsive, as now it never doesn't wake up right away when I push the power button, and the lock screen responds immediately. I have had no spontaneous reboots, and my screen hasn't gone black momentarily at all. Hopefully this positive trend will continue. My only current issue is the apps that no longer work, or no longer work correctly. Still a far larger percentage work without incident than not, and the ones that don't are mostly Android 4.3 problems and not Nook HD(+) problems so they will be fixed eventually.
All in all, I would say that 4.3 isn't as bad as it was initially made out to be...
RageAgain said:
Understandable. I am not having the same slowdowns and lag that occurred with the 20130814 now that I have updated to the 20130815 of the 10.2. Much smoother and more responsive, as now it never doesn't wake up right away when I push the power button, and the lock screen responds immediately. I have had no spontaneous reboots, and my screen hasn't gone black momentarily at all. Hopefully this positive trend will continue. My only current issue is the apps that no longer work, or no longer work correctly. Still a far larger percentage work without incident than not, and the ones that don't are mostly Android 4.3 problems and not Nook HD(+) problems so they will be fixed eventually.
All in all, I would say that 4.3 isn't as bad as it was initially made out to be...
Click to expand...
Click to collapse
I agree. I'm one who said it was slightly slower than 10.1 initially, but after updating to the 0815 nightly version, it doesn't seem to be the case anymore.
Although, I also changed the governor to OnDemand, and scheduler to cfq, like I heard from somebody who got better results with that configuration, on another post somewhere... So I don't know if it was one or the other, or a combination of both. But I have no complaints with the current setup.
RageAgain said:
I did a dirty update, but my results were largely different from yours.
1) Superuser works for me.
2) You used the old gapps (20130726), and I used the new (20130813) so I had no issues with the play store.
3) It was really laggy until I discovered that it only seems to like ( on my tablet anyway ) the ondemand governor with the cfq scheduler.
I have lost a few apps/widgets, but nothing that I miss so far ( stuff like 'Temp + Cpu v2 ), but it screwed up gl to sd until I manually edited its .xml file.
I update to 10.2 20130814 from 10.1 20130813, and it seems to be working but I have a lot more live testing to do...
Click to expand...
Click to collapse
Could you please let us know what you did for the dirty update, I am planning to upgrade from CM10.1 to CM10.2 without loosing the Apps and User profiles(?) For normal updates in CM10.1, I just run the ROM update choosing the Update file (No cache clearing etc, it automatically update without going to CMW recovery mode, at least i dont have to choose any options in this kind of update). If this is not correct method of Upgrading to 10.2, could you please provide all the steps that i need to do. Thanks in advance.
sudheersagar said:
Could you please what you did for the dirty update, I am planning to upgrade from CM10.1 to CM10.2 without loosing the Apps and User profiles(?) For normal updates in CM10.1, I just run the ROM update choosing the Update file (No cache clearing etc, it automatically update without going to CMW recovery mode, at least i dont have to choose any options in this kind of update). If this is not correct method of Upgrading to 10.2, could you please provide all the steps that i need to do. Thanks in advance.
Click to expand...
Click to collapse
First, I am using the TWRP recovery and not the CMW, as I just wanted the touch...
The steps that I took were just, in TWRP choose both the update file and the gapps file and let it install both. Then I cleared the cache and dalvik cache, and rebooted. I usually wait until it settles down after the initial boot and then reboot.
So, in CMW, I guess that would be ( they way I used to do it in CMW anyway ):
1) Reboot into CMW
1a) When in doubt, do a backup
2) Install System update
3) Install Gapps ( 4.3 version latest that I used was the 20130813 )
4) Clear/wipe cache and dalvik cache
5) Reboot into Android and wait til it stops fiddling with itself
6) Reboot again
It is the method I have used since my Acer A500 days...
SU Still Mishandling Environment
Even with the SuperSU package linked in the first post, I'm still having issues with SU misbehaving in terms of how environmental variables are handled. In 10.1 I can pass pretty much whatever I want into the su session, and it behaves quite similarly to su running on a linux desktop. In 10.2, I can't pass anything, even with the --preserve-environment flag (which shouldn't even be necessary, since I'm not using -l.) SuperSU doesn't seem to improve the situation much, except for making su usable in the shell again. Has anyone else noticed this, or am I in the minority of people that wants to pass things like PATH and ZDOTDIR into my su session? Is this a security feature of Android 4.3, or just a quirk with SU at this point?
I've tried some test cases to illustrate this behavior:
CM 10.1 20130813
Code:
[[email protected] /]% su -v
13 com.android.settings
[[email protected] /]% export TESTVAR=1234
[[email protected] /]% su
[[email protected] /]# echo $TESTVAR
1234
CM 10.2 20130815 w/ SuperSU linked in OP
Code:
[email protected]:/ $ su -v
1.51:SUPERSU
[email protected]:/ $ export TESTVAR=12345
[email protected]:/ $ su
[email protected]:/ # echo $TESTVAR
[email protected]:/ # exit
3|[email protected]:/ $ su --preserve-environment
[email protected]:/ # echo $TESTAR
CM 10.2 20130815 without SuperSU had the same result, but had really broken output.
CM 10.2 20130817 has the same behavior as the previous nightly.
First of all, thanks a lot to Cpasjuste for making the working gapps flashble zip, here's a link to that. I take no responsibility for doing this, all credit goes to Cpasjuste. Also I do not know a lot about deving myself but i've had two android devices before this and have been avid in modding them, just thought i'd put that out there.
So, first thing I did was get root, factory reset and get safestrap recovery. then I made a backup of my stock ROM, kept it on my kindle, and moved it to a safe spot in my computer (I recommend everyone does this, no matter if they choose to follow this setup or not.) I created a new ROM slot with default partitions, and restored my stock ROM to it (you do this in case any thing happens you have your stock ROM to fall back on). I tried flashing Cpasjuste's gapps rom, but for some reason there were multiple issues with it so instead, i restored to stock, on ROM slot 1, and flashed his gapps zip mentioned earlier. Rebooted and everything (well almost everything) worked perfectly. playstore works and only app that I have discovered to be incompatible is instagram for some reason, but i found a apk download online that installed perfectly to replace it. I installed a app from play store called recent apps quick button, which basically activates android's recent apps, then I installed a app from play store called Home2 shortcut. this lets me assign the resent apps quick button to double tapping the home button so now when i double tap the home button it brings me to recent apps. It's really nice since kindles default Rom doesn't have a recent apps button! Right now I am working on blocking updates from amazon to prevent losing root or bricking, using the tutorial found at the end of the root link. Let me know what you guys have done to make your kindle fire HDX experince better, or any questions you have.
Also, I forgot to mention that using the gapps flashable zip broke my amazon appstore and most amazon services, except video it seams like, but since we have safestrap recovery this isn't a big deal to me because i can always get it back, and im sure it will be fixed in future. Have fun and be safe while experimenting with your kindle.
I TAKE NO RESPONSIBILITY FOR DAMAGE DONE TO YOUR DEVICE, KNOW WHAT YOUR DOING BEFORE YOU DO IT!!!!!!!
Ah! Thats what I missed, I didnt realise I could use restore on a different ROM slot! Thanks for that, going to try it later!:good:
OurFriendIrony said:
Ah! Thats what I missed, I didnt realise I could use restore on a different ROM slot! Thanks for that, going to try it later!:good:
Click to expand...
Click to collapse
No problem! Also if I were you I would delete most of the user apps on your stock ROM, Idk if you did what I said and factory reset before you got safestrap (I would not try it if you already safestrap since you will lose safestrap and possible break you device!) but if you didnt I would just go back and delete most user apps and data off stock ROM and then redo the backup and restore with that. because you most likely wont be using the stock ROM (you don't want to alter it since you want to have a safe spot to restore to) you want it to take up as little storage as possible. My advice, pretend that you don't have root and don't do anything with it, like editing parts of system, or flashing mod packages, etc... (only exception is having super user and safe strap app installed.) Let me know if any part of this was to confusing. Hope this helped!
Haha, I saw your reply about 2 minutes after starting up the factory rest. I can, however, confirm that safestrap is still installed between the boot and IS load, so I'm actually in a perfect position. Have taken a new backup of pure stock rom!
Happy days!
I got a copy of my Stock ROM installed into ROM slot 1 and then added the gapps package, it worked beautifully!
I now have a tablet with all the google features on and have no issues so far.
except...
when I boot to ROM slot 1, I get a message saying "Kindle is Updating/Upgrading". It doesn't do anything and it only takes a few seconds before it gives up. I was just wondering if there was a way of getting rid of this??
As someone who hasn't had any prior experience with Android (although a fair share of experience with GNU/Linux), I appreciate a thread like this.
I also rooted the device (works well from GNU/Linux), installed SuperSU and some essential apps to make the stock OS usable (busybox and a terminal emulator, of course; and also a lightweight file browser that doesn't take much space and does exactly that, lets me browse local files). Then installed SafeStrap and backed everything up to both the Kindle and the PC (the backup is accessible via MTP, in the internal storage, so you can just connect the USB cable and copy the TWRP directory – at least in KDE).
Now I'm going to try the new AOSP ROM. Though since I'm new to the whole Android business, the partition sizes have me a bit confused. I'd want to have three slots – the stock ROM (obviously), the stock FireOS (one that I can modify) and AOSP. What partition sizes for the two slots would be the best, if it's the 16GB HDX? Also, say I download a PDF file; would both FireOS and AOSP see the file if I put it in internal storage, or would I have to manually copy it over to the other slot through my PC?
@GreatEmerald, whats AOSP? I'm thinking of playing around a bit more. I want to try out some more ROMs.
I put my first ROM slot (Stock with gapps added and amazon crap removed) on Flight Mode and now when I try and put it on wireless it restarts....
OurFriendIrony said:
@GreatEmerald, whats AOSP? I'm thinking of playing around a bit more. I want to try out some more ROMs.
I put my first ROM slot (Stock with gapps added and amazon crap removed) on Flight Mode and now when I try and put it on wireless it restarts....
Click to expand...
Click to collapse
AOSP = Android Open Source Project
Many other devices have an AOSP build and is typically a very nice build to flash if you like the core android feel with some extra very nice features.
OurFriendIrony said:
@GreatEmerald, whats AOSP? I'm thinking of playing around a bit more. I want to try out some more ROMs.
I put my first ROM slot (Stock with gapps added and amazon crap removed) on Flight Mode and now when I try and put it on wireless it restarts....
Click to expand...
Click to collapse
Yea, as mentioned, AOSP is a ROM for stock Android 4.2.2, pretty much the only big ROM available for the HDX7 right now: http://forum.xda-developers.com/showthread.php?t=2607185
It works pretty well as it is, I'm impressed it's as good already given how new the project is. Though it still has some issues for normal use. Aside from the bugs mentioned in the post, Chrome crashes as soon as it's launched (but you can use Firefox instead), as does the Kindle app (which is mainly what is stopping me from using it, because the point of a Kindle is the integration with Amazon services...). Also, the Facebook app fails to install for some reason.
Everything else I tried works fine. I installed F-Droid, a file manager, Busybox and a terminal, then the Amazon app and some of the Amazon cloud apps, and finally Skype. All of them work very nicely on AOSP. Even tested a video call on Skype and it worked without any problems (including the camera working correctly).
As someone new to Android and from a GNU/Linux background, I'm really happy that F-Droid exists. It's an app store/package manager that offers only free and open source software. For regular users that might sound as not a big deal, but actually filtering software by license is more powerful than one would think. You're guaranteed to have only apps that have no spyware and adware, because you can't hide them in open code. And those who make apps without publishing their code obviously have something to hide. So much like in GNU/Linux, the first place to check for new apps for me is F-Droid, and after that the main store of the OS (be it Google Play or Amazon Store), and only then 1Mobile market.
I still would like to know more about that partitioning, though. I figured out that the emulated SD card is shared between ROMs (I uploaded F-Droid to the Downloads directory on FireOS, and could see it on AOSP just as well), but I still don't know what exactly the two partitions you have to make to set up a ROM slot are and how much space should be allocated to them.
GreatEmerald said:
Yea, as mentioned, AOSP is a ROM for stock Android 4.2.2, pretty much the only big ROM available for the HDX7 right now: http://forum.xda-developers.com/showthread.php?t=2607185
It works pretty well as it is, I'm impressed it's as good already given how new the project is. Though it still has some issues for normal use. Aside from the bugs mentioned in the post, Chrome crashes as soon as it's launched (but you can use Firefox instead), as does the Kindle app (which is mainly what is stopping me from using it, because the point of a Kindle is the integration with Amazon services...). Also, the Facebook app fails to install for some reason.
Everything else I tried works fine. I installed F-Droid, a file manager, Busybox and a terminal, then the Amazon app and some of the Amazon cloud apps, and finally Skype. All of them work very nicely on AOSP. Even tested a video call on Skype and it worked without any problems (including the camera working correctly).
As someone new to Android and from a GNU/Linux background, I'm really happy that F-Droid exists. It's an app store/package manager that offers only free and open source software. For regular users that might sound as not a big deal, but actually filtering software by license is more powerful than one would think. You're guaranteed to have only apps that have no spyware and adware, because you can't hide them in open code. And those who make apps without publishing their code obviously have something to hide. So much like in GNU/Linux, the first place to check for new apps for me is F-Droid, and after that the main store of the OS (be it Google Play or Amazon Store), and only then 1Mobile market.
I still would like to know more about that partitioning, though. I figured out that the emulated SD card is shared between ROMs (I uploaded F-Droid to the Downloads directory on FireOS, and could see it on AOSP just as well), but I still don't know what exactly the two partitions you have to make to set up a ROM slot are and how much space should be allocated to them.
Click to expand...
Click to collapse
The system partition only needs to be as big as the Rom or backup you flash is, the data partition I typically make as big as possible (4000 mb) since this is what your Rom will consider internal storage. This is where apps and app data will be downloaded onto, where the rest of the data on your ad card is shared and is used for music, videos and lots of other custom stuff you can add. As for the cache I leave it at the default, this is where temporary data for apps is stored ( for example when you play a youtube video, it is temporarily stored on this partition.
spaghettiknight said:
The system partition only needs to be as big as the Rom or backup you flash is, the data partition I typically make as big as possible (4000 mb) since this is what your Rom will consider internal storage. This is where apps and app data will be downloaded onto, where the rest of the data on your ad card is shared and is used for music, videos and lots of other custom stuff you can add. As for the cache I leave it at the default, this is where temporary data for apps is stored ( for example when you play a youtube video, it is temporarily stored on this partition.
Click to expand...
Click to collapse
Ah, that's good to know. It makes me wonder, though – can I resize partitions in some way? Say, I created a smallish partition setup for ROM slot 1, then another one for ROM slot 2, and then have a bit spare; can I allocate the whole space to ROM slot 1 if I no longer need ROM slot 2? Or to do a backup, clear the partition setup, then restore the backup into newly sized partitions?
GreatEmerald said:
Ah, that's good to know. It makes me wonder, though – can I resize partitions in some way? Say, I created a smallish partition setup for ROM slot 1, then another one for ROM slot 2, and then have a bit spare; can I allocate the whole space to ROM slot 1 if I no longer need ROM slot 2? Or to do a backup, clear the partition setup, then restore the backup into newly sized partitions?
Click to expand...
Click to collapse
yes, what i would do is backup my current setup, delete the rom slot your using, then remake it with your newly picked partitions
Nevermind. Got it working now. Thanks for the guide!
safestrap not working on my kindle hdx 7"
Hi my kindle is already rooted and I used towelroot. I have supersu installed too. I'm currently on the step of where I should install safestrap, but it seems safestrap is not working on my tablet. I tried 3.65, 3.72, 3.75 version of safestrap but it does not work. It always restart normally. Not in recovery. Pls help. 13.3.2.8 version. Thank u in advance.
pinksummer17 said:
Hi my kindle is already rooted and I used towelroot. I have supersu installed too. I'm currently on the step of where I should install safestrap, but it seems safestrap is not working on my tablet. I tried 3.65, 3.72, 3.75 version of safestrap but it does not work. It always restart normally. Not in recovery. Pls help. 13.3.2.8 version. Thank u in advance.
Click to expand...
Click to collapse
Have you blocked OTA with HDX Toolkit? If not your device will likely brick if Amazon attempts to push an update. At present the blocker in HDX toolkit is the only one that works on 3.2.8.
Your attention should be focused on this task; can deal with safestrap once OTA block is in place.
ya I had to learn about that the hard way
Please Read Everything Carefully as some info is crucial to getting your old phone functioning well!
Update:::: August 16, 2015 ::::::::::
STAGEFRIGHT BUG:
This bug has been blown way out of proportion and it is not something anyone should be extremely worried about. There are no patches for gingerbread as of yet, and I cannot patch it since I do not have the CM source. However, you can copy from /system/build.prop and open the file in Notepad++ and then search for "stage" and change the "true" to "false" -without quotes. While this is not a fix, it will still offer some protection. Do not download apk files from places you do not trust and you should be ok. For now you can also do the following :
1) In MMS App, Turn off Auto-Retrieve. If your Carrier converts your voice mails to text, you will no longer be getting those. The app will then provide a download button for you to download the message instead. You can simply call your voice mail and listen to the message and download it if you think its important.
2) Remove the stock browser - do not use it to sign into anything.
3) Use Firefox as your default browser. It will be slower but safer. Type about:config > Search for Stagefright > Set stagefright.disabled to True
4) FIREWALL : Use AFWall+ to block Apps making unneeded connections to places you don't trust. It starts in Whitelist mode. Change it Blacklist mode. Be careful, and understand how to use this. LINK https://play.google.com/store/apps/details?id=dev.ukanth.ufirewall&hl=en
6) In an effort to save RAM and unnecessary background Operation, I have included ForceStop Prevent Running. Do not update this past version 0.15. Updates after this do not work well on Gingerbread. Preventing Google Play Store is ok, Play Services is optional (You will lose all sync except Contacts and Calendar but no unnecessary background syncing.[/I]
7) GApps package now Included. It is Stock Gingerbread Gapps with Google Play Store updated to version 5.1.11. Please note that the latest Google Play Store works Fine but it is slower. If you want to block it from Updating, BEFORE connecting to Wifi, IF the APK is called com.android.vending.apk THEN create a new directory in /data/app called com.android.vending-1.apk, so it is always 1 number higher than what is installed. Also, if you do Update, MOVE the update to System parition or you will have 2 copies of it. Then delete its Dalvik cache and reboot
Update :::: June 18, 2015 ::::::::::::::New Goody : Added Modded K9-Email for Gingerbread to list of Software - It is open source, and a good way to check "Hotmail/Outlook" using Imap. Imap functions in Outlook are limited but the program works. I have removed the Ugly K9 dog Icon and replaced it with a real Email icon to make it look more appealing
Updated ::: June 12, 2015 ::::::::::::: New Goody : Attached Adaway for Gingerbread - Disclaimer: I support ads in some apps that do so reasonably, but some apps are out of control with Permissions and blowing up your screen with constant Ads, this behavior is unacceptable so I have included AdAway here. It is the user's Right and choice to do as they please on a carrier/contract free ROM, however it is not my responsibility what you may do with this ROM. This ROM still contains most of the original components of the Original ROM and I may remove outdated functions or add new functions in the future
This is MIUI 2.3.30 Gingerbread version 2.3.7 U.S. English Rom
I have now added various changes to this ROM. No more Security Certificate issues. No more Email / IMAP issues -K9 Mail, Exchange and Google accounts should sync without issues now
Xposed For Gingerbread + Prevent Running + Security Fixes are now attached below for convenience
Partitioning your SDCard is absolutely recommended or you will not have enough Internal Space to have Google Apps - Internal Space should only store Dalvik Cache - Please see details
1) 30 Step Headset Volume Configuration - works great with Volume Limiter
2) Security Certificates updated. Bad and Outdated ones Removed. see GuardianProject. This ROM is more secure. I also highly recommend using Firefox and OperaMini. I have also attached CACERTS.BKS - Remove the .TXT Extension - Already included in the ROM but can be used in other Gingerbread devices!
3) Nexus Pie boot animation
4) Misc changes - Gps locks fast when using GPS apps like Mapfactor Navigator, CPU Sleep works during trackball wake/notify feature, country codes in dialer corrected, Correct APN and Carrier name will show.
Recommended Software
I recommend you download this: Volume Limiter by Captain Neoguri - March 26, 2014
Caution: Nexus One hardware has a bug where upon using this app when adjusting volume outputs in max volume which can be dangerous for your ears, Please do not wear your headset when doing volume adjustments. I recommend a volume of upto 16 in this app for headset max volume.
Recommended : Xposed Framework for Gingerbread :::::: Download Below
Once you install it, Update it, and Install the Following :
1) Fake ID Fix
2) Master Key Multi Fix
3) MasterKeyFix GB
These are all Security Patches for Gingerbread. I have taken the Courtesy to attach them in this thread.
I recommend Google Play Store no later than 5.1.11 as the latest versions seem to have some kind of DPI related bug and will Force close constantly. Google Play Services can however be updated to 7.5.73-034 - I have tested it and it is working perfectly fine
Launcher : I am now recommending Holo Launcher from the Playstore. It saves RAM and it is much more Functional than the Stock launcher. When I have time, I will entirely remove the Stock Launcher and put Holo Launcher in the ROM or until I get permission from its author
Call Blocking Call blocking feature is built into the ROM, however it is like most call blockers which simply hide the blocked call but it still goes through. A solution to this is to use this app. Root Call Blocker : https://play.google.com/store/apps/details?id=fahrbot.apps.rootcallblocker.beta&hl=en
It will take about 5 minutes to set up and will allow you to kill a call after 1 ring and it will not go into your voice mail. So the Spam caller will have no idea whether its a dead number or to even bother calling back. Usually "Dead Rings" make the automated telemarketing calls stop because the computer dialer that is making the call keeps getting dead air and it keeps showing in their call logs. So it becomes their problem, you will simply never see the call coming until 1 day you decide to go in your blocker's call log. So if you have a pesky caller, use this app.
Radio / Baseband Software
http://wiki.cyanogenmod.org/w/Passion_Info
If your 3G does not work, Please check your 3G Network's supported Frequency with your Nexus One 3G Supported Frequency. There were 2 models of this phone released in Canada. This is not due to MIUI and downloading any Radio software will NOT fix this because it is by design.
You need version 5.08.00.04 if you are not using a Korean Nexus One. Download it, then Extract the Radio.img file from the zip.
1) You need to have ADB Fastboot and ADB Enabled on your phone. You can download a small ADB Version here.
http://forum.xda-developers.com/showthread.php?t=2588979
There are also other places to get ADB, But just know there is no need to download Gigantic SDK Kit from Google. You only need the basic ADB with Fastboot.
2) Press Volume Down, Then Press Power and Start your phone in Bootloader Mode. Then select Fastboot. Make sure your phone is now in Fastboot mode, it should say it at the top of all the choices.
3) Go to where you ADB folder is and hit Shift + Right Click = Open Command Window Here.
4) Now Plug your USB cable into your phone and type in Command Prompt this - fastboot devices. You should see your Phone listed. If you do not, go back and check everything.
5) Copy that Radio.img file from the Zip you extracted into your ADB Folder and then type
fastboot flash radio radio.img
It should take about 30 seconds.
Use the instructions here http://forum.xda-developers.com/showthread.php?t=698721 to push it to your phone.
Now you are done.
How To Increase Internal Storage using Data2SD. This puts Apps(apk) AND Data onto your SD EXT Partition so you have more free Internal memory on the internal /Data partition
MIUI comes with something called A2SD+ which is turned off by Default.
1) Go into TWRP Recovery. Create EXT-4 Partition. You will lose all data, so before doing this, its a good idea to backup.
Create an EXT partition size you are comfortable with and depending on your needs.
2) SWAP SPACE 0. You do not need it.
When it is done. Your SD Card now has a FAT partition and an EXT Partition. You can reformat your FAT to FAT32 in Windows if you would like and give it a name.
Then get this Script. MAKE SURE YOU READ EVERYTHING in the Following Threads.
This is Ungaze Data2SD Script. Script is now Attached at the bottom of this post
http://forum.xda-developers.com/showthread.php?t=1378568
http://forum.xda-developers.com/showthread.php?t=1661892
Get the Data2SD Script and copy it to your SDCard FAT32 partition. Reboot your phone a couple times after flashing MIUI. Wipe Dalvik, Wipe Cache, Then Flash Ungaze D2SD from Recovery.
Follow directions in those threads and you should see an increase in Internal Storage Space in MIUI
You can delete the Contents of /mnt/asec/d2sd/data/app/* and /mnt/asec/d2sd/data/data/* from your Device Root which is "/" after this otherwise you will have 2 copies of the same app. You should only have Dalvik-Cache in this location as it links to your Internal Memory Data partition. Make a backup first to your SD Card incase something goes wrong by copying those APKs, then simply Delete them. Your Device System Partition will have System Apps, Data partition will have Dalvik Cache and your SD Card's EXT Partition will have the rest of the Apps and their Data.
ETC INFO
You will Need ROOT Access for almost everything if you want to make changes so make sure you have SuperUser Access Turned ON in MIUI.
Search for ADAWAY which creates a HOSTS file in your /System/etc Directory, which helps to block ads. I prefer using only open source apps or apps with Ads that do not Annoy.
Use ES File Explorer
And now you can install (or Uninstall) all the Pesky large size Google Apps. I personally stay away from ANY Google App I do not absolutely Need. I remove apps like
Google Search
Google Talk (Hangouts)
and Other Google crap.
MIUI has the basics of what you need. But you can Remove the MIUI Accounts etc because you won't be needing it.
And Anything Pesky that I cannot trust. Make sure you Backup in Recovery first before Uninstalling System Apps.
You can use an app called Disable Service from the PlayStore to disable Individual Services in an app incase you don't want certain services loading up. This should help conserve memory and cpu cycles if needed and also to disable functionalities in Apps that are otherwise impossible to disable. Link Below
https://play.google.com/store/apps/details?id=cn.wq.disableservice&hl=en
The idea is to keep it SIMPLE and functional.
Last but not least, Thanks to everyone at XDA for making things like this possible. Without this community, we would not be able to do the things we can to bring enjoyment and functionality to our devices. Thanks to everyone who finds a solution and posts it with details for everyone to understand. I hope this culture keeps growing stronger.
Don't forget to say Thanks
That's it Folks! Bring out your old Nexus One. It will be fast, and serve its purpose as a phone first. And YES, Even your mom will now be able to use it. Enjoy!
ROM DOWNLOAD:
Download MIUI-Android-2.3.30-Gingerbread-NexusOne
Thanks for your time and for sharing this with us... Maybe some of us knows these stuff but in the KK 4.4.4 era, there always is someone who want to use the Sexy Nexy as a fully functional phone and use an eye candy ROM and more user friendly than CM 7.2.
For recovery I recommend 4Ext Recovery
Regards!
Obsy said:
Thanks for your time and for sharing this with us... Maybe some of us knows these stuff but in the KK 4.4.4 era, there always is someone who want to use the Sexy Nexy as a fully functional phone and use an eye candy ROM and more user friendly than CM 7.2.
For recovery I recommend 4Ext Recovery
Regards!
Click to expand...
Click to collapse
Hey, no problem! Yes 4Ext is a good recovery if you are on Blackrose and change your hboot partitions etc. My Guide is for those who don't want to mess with that and the TWRP Recovery is working flawless. I will mess around with Blackrose to increase internal Memory because one thing I find after bootloader unlock is the initial boot process is what takes the longest! MIUI Itself boots in less than half the time it takes for the intial boot. (Nexus X multi colored Logo with gray colored open lock at the bottom)
I am still not quite sure if the trouble of using Blackrose just to cut down my Cache partition to 50mb is worth the time and trouble because the phone is running fine. And I am also not sure if Blackrose will work with twrp. I will need to read more on this.
Thanks.
I completely agree with this OP. This is best rom you can use on the nexus one, I've played around with all sorts of roms and versions including the most recent KitKat iterations and non of them are smooth in comparison with a solid gingerbread rom. But this rom is particularly good because it still makes the Nexus One feel fresh.
daaac said:
I completely agree with this OP. This is best rom you can use on the nexus one, I've played around with all sorts of roms and versions including the most recent KitKat iterations and non of them are smooth in comparison with a solid gingerbread rom. But this rom is particularly good because it still makes the Nexus One feel fresh.
Click to expand...
Click to collapse
Thanks Daaac, you are right. When I pull out this old Phone, people ask me where did I get it? And how nice it looks. When I tell them its over 4 years old, they seem surprised. What google still does not seem to realize is that when it comes to Phones, people look at both the Phone hardware AND its Software that's running on it. Android is terribly ugly and MIUI is the closest you can get to getting some kind of Organized option structure even though it lacks some power user features, it is still better than scrolling through endless Cyanogenmod Gingerbread options. Not the fault of Cyanogenmod, but I blame Google for the terrible User Interface of Android. Google seems to hire Amateurs to design their User Interface and then market it as Simplicity. In my opinion, Apple runs circles around Android when it comes to Fluidity but ofcourse we know why we stick to Android, for things an iOs user can only dream of, specially on older devices. This MIUI ROM comes closest to make your Nexus One a daily usable phone with very few annoyances, however it is stable, never crashes, and looks good.
Thanks for your guide, very nice to read your step by step, good as I didn't update nexus one since 1 year ago and I don't remember all steps.
Thanks!!
You are most certainly welcomed Sir! If you ever have any questions, feel free to ask me.
danibus said:
Thanks for your guide, very nice to read your step by step, good as I didn't update nexus one since 1 year ago and I don't remember all steps.
Thanks!!
Click to expand...
Click to collapse
Thank you very much for taking the time to cook such a nice ROM for Nexus one. I hadn't installed any custom ROM on my device until some days ago. It is really awesome. Considering that Nexus one is an old device I do not expect to be any update for this ROM, but in case there was one I would appreciate it if you could post the link.
You need to see the first post for that to happen.
miui_nexus1 said:
Thank you very much for taking the time to cook such a nice ROM for Nexus one. I hadn't installed any custom ROM on my device until some days ago. It is really awesome. Considering that Nexus one is an old device I do not expect to be any update for this ROM, but in case there was one I would appreciate it if you could post the link.
Click to expand...
Click to collapse
Thanks for your quick reply. I am well aware of your updates to the ROM. I especially love the Nexus pie and appreciate the security updates.
ocd_amp said:
You need to see the first post for that to happen.
Click to expand...
Click to collapse
More security fixes!! I can't believe my eyes. Thanks a ton!
Hola launcher
I have tried Hola launcher (e.g. with chromatic theme), and its icons are similar to MIUI icons in contrast with Hola launcher (which is similar to latest Android versions).
P.s. I am just testing . I don't know if this launcher will drain the battery fast or not.
That launcher will slow down your system, and constantly try to download ads. It also takes up a LOT of RAM. The idea here to make the device run FAST consuming as little resources as possible. On a fresh boot, my N1 RAM usage is at 95MB, and after 28 Hours, it is 144MB. With other processes that are important Cached. My Dialer starts and makes calls upto 3 seconds faster than my Galaxy 3 on Lollipop.
All this can be achieved by disabling Google Play Services and Google Play Store from starting on boot (unless you have apps that you are always using and depend constantly on them) - I don't use apps that heavily depend on Google Play Services, and if I do, I start the service and the app, then I press the "back" key and exit Google Play Services. - Xposed Framework module attached to prevent Apps from running helps.
Battery life is great, easily lasts 2-3 days with minor screen time / talk time - Heavy usage can last a full day. This is all on a 2010 phone with an old battery. My Nexus One puts most people's dual core modern phones to shame when it comes to speed
miui_nexus1 said:
I have tried Hola launcher (e.g. with chromatic theme), and its icons are similar to MIUI icons in contrast with Hola launcher (which is similar to latest Android versions).
P.s. I am just testing . I don't know if this launcher will drain the battery fast or not.
Click to expand...
Click to collapse
That is fantastic battery life and speed you have!
I have got some questions and appreciate your help (Please forgive my newbie questions and such a long post)
1) When I want to run PHONE and MESSAGING applications on “Holo launcher” it gives this error message: "This activity cannot be launched". Although stock MIUI icons for these applications work fine.
2) I partitioned my memory card using ClockworkMod recovery and I dedicated 2 Gb’s of my 16 Gb class 10 microSD card (I haven’t had any problem with this recovery so far but if you think it may be incompatible with your ROM or cause issues please let me know and I will replace it). After flashing Ungaze Data2SD I see an increase in the internal memory . To be honest I didn’t completely understand the rest of the instructions so I do not know whether I have done it right or not.
"You can delete the Contents of /mnt/asec/d2sd/data/app/* and /mnt/asec/d2sd/data/data/* from your Device Root which is "/" after this otherwise you will have 2 copies of the same app. You should only have Dalvik-Cache in this location as it links to your Internal Memory Data partition. Make a backup first to your SD Card in case something goes wrong by copying those APKs, then simply Delete them. Your Device System Partition will have System Apps, Data partition will have Dalvik Cache and your SD Card's EXT Partition will have the rest of the Apps and their Data."
This is what I did:
I used “adb shell” to access the contents of those two locations and deleted their contents. As I said before I didn’t understand the rest of the instructions and I assumed it has been done correctly!! Then I installed my apps normally but I do not know whether they have been copied to the internal memory or the memory card. (I have downloaded apk’s of all apps I use from "apps.evozi. /apk-downloader/" or "apk4fun" and I have installed them using package manager).
My main question is what do I do after cleaning up those two locations and how do I install the apps so they will be copied to the memory Card’s Ext partition.
You should only have Dalvik-Cache in this location (What location exactly?)
Your Device System Partition will have System Apps (/system?)
Data partition will have Dalvik Cache (/data?)
SD Card's EXT Partition (/sd-ext?) If I am right as I have “adb” installed on my windows, it doesn’t show me the contents of this folder naturally. I have Ubuntu Linux too but “adb” is not installed on it.
Thanks a lot for your time!
1) Remove Holo Launcher icons and drag and drop Phone and Messaging icon from Drawer into the Dock at the bottom.
2) Use TWRP recovery.
3) /Data partition is EXT2 partition on your SDCard. Apps+Data (app data) will be there.
4) /mnt/asec/d2sd will be the "other" data partition (the original data partition) which is where your Dalvik cache will be.
5) Apps will be installed where their manifest suggests - Most apps will be installed to /Data on your EXT and their Dalvik Cache will be on the Internal parition /mnt/asec/d2sd/Dalvik-Cache
6) Use ES File Explorer - give it Root permissions - make sure Superuser permissions is set to On and inside ES Explorer you give Root access R/W - you can view all partions there
7) Use DiskInfo to see all your partitions
miui_nexus1 said:
That is fantastic battery life and speed you have!
I have got some questions and appreciate your help (Please forgive my newbie questions and such a long post)
1) When I want to run PHONE and MESSAGING applications on “Holo launcher” it gives this error message: "This activity cannot be launched". Although stock MIUI icons for these applications work fine.
2) I partitioned my memory card using ClockworkMod recovery and I dedicated 2 Gb’s of my 16 Gb class 10 microSD card (I haven’t had any problem with this recovery so far but if you think it may be incompatible with your ROM or cause issues please let me know and I will replace it). After flashing Ungaze Data2SD I see an increase in the internal memory . To be honest I didn’t completely understand the rest of the instructions so I do not know whether I have done it right or not.
"You can delete the Contents of /mnt/asec/d2sd/data/app/* and /mnt/asec/d2sd/data/data/* from your Device Root which is "/" after this otherwise you will have 2 copies of the same app. You should only have Dalvik-Cache in this location as it links to your Internal Memory Data partition. Make a backup first to your SD Card in case something goes wrong by copying those APKs, then simply Delete them. Your Device System Partition will have System Apps, Data partition will have Dalvik Cache and your SD Card's EXT Partition will have the rest of the Apps and their Data."
This is what I did:
I used “adb shell” to access the contents of those two locations and deleted their contents. As I said before I didn’t understand the rest of the instructions and I assumed it has been done correctly!! Then I installed my apps normally but I do not know whether they have been copied to the internal memory or the memory card. (I have downloaded apk’s of all apps I use from "apps.evozi. /apk-downloader/" or "apk4fun" and I have installed them using package manager).
My main question is what do I do after cleaning up those two locations and how do I install the apps so they will be copied to the memory Card’s Ext partition.
You should only have Dalvik-Cache in this location (What location exactly?)
Your Device System Partition will have System Apps (/system?)
Data partition will have Dalvik Cache (/data?)
SD Card's EXT Partition (/sd-ext?) If I am right as I have “adb” installed on my windows, it doesn’t show me the contents of this folder naturally. I have Ubuntu Linux too but “adb” is not installed on it.
Thanks a lot for your time!
Click to expand...
Click to collapse
Thanks a lot for the complete information. Holo launcher and Prevent running are really great. Now only 94 Mb of RAM is used . I expect to have better battery life too. I will report that after some days of using this configuration.
miui_nexus1 said:
Thanks a lot for the complete information. Holo launcher and Prevent running are really great. Now only 94 Mb of RAM is used . I expect to have better battery life too. I will report that after some days of using this configuration.
Click to expand...
Click to collapse
Oh lord, might be joining the N1 family due to recent corrupt internal data/EMMC failures on the Sensation and One Mini. Hoping to get a daily ROM and stable service from AT&T. Any critical updates/preventions prior to dusting off 2 years of being shelved and lending to 3 people (aka TANK N1).
Excited to see activity and will give this a shot when I get home. Thanks for posting!
Thanks for posting about Stagefright bug. It seems to be a hell of a bug. I have done all of them except the first one. Could you elaborate on how to edit build.prop?
By the way just a small thing: there is an extra "r" in
3) Use Firefox. Type about:config > Search for Stragefright > Set stagefright.disabled to True
Thanks again.
You're welcome. Enjoy!
lfe.zaius said:
Oh lord, might be joining the N1 family due to recent corrupt internal data/EMMC failures on the Sensation and One Mini. Hoping to get a daily ROM and stable service from AT&T. Any critical updates/preventions prior to dusting off 2 years of being shelved and lending to 3 people (aka TANK N1).
Excited to see activity and will give this a shot when I get home. Thanks for posting!
Click to expand...
Click to collapse
You edit build.prop either right on the phone using a text editor, or if you're like me, do it on the computer with Notepad++. It's a text based file. Oh yes, that was a spelling error. Fixed.
miui_nexus1 said:
Thanks for posting about Stagefright bug. It seems to be a hell of a bug. I have done all of them except the first one. Could you elaborate on how to edit build.prop?
By the way just a small thing: there is an extra "r" in
3) Use Firefox. Type about:config > Search for Stragefright > Set stagefright.disabled to True
Thanks again.
Click to expand...
Click to collapse
I have opened it using ES file explorer (ES Note editor) on my device but when I want to save it it shows an error:"Error occurred when trying to save the file. It will not be saved.". I have granted Superuser access to ES file explorer but I cannot find a way to give the specified permissions you have mentioned in the post. I would appreciate your help.
I just want to share my notes and links about successful experience of the Evervolv KitKat 4.4 ROM installation on a Nexus One device.
Developer's thread is here: http://forum.xda-developers.com/showthread.php?t=2540366
1. I installed BlackRose Bootloader (see link in the first post of the dev thread) and partitioned my SD to have sd-ext Ext4 partition. Actually, I don't use it yet, because it looks like forced moving of apps to SD (or other "cheating") is not reliable, see e.g. here (about similar ROM): http://forum.xda-developers.com/showthread.php?t=2573352
2. Installed TWRP, getting info here: http://teamw.in/project/twrp2/51
"Direct download" lead me to some spam so I used "Recovery Image Method" to install the Recovery.
3. Resized System partition using BlackRose.
After several not very successful attempts to install both Evervolv ROM and GApps I ended with System partition size = 240 Mbytes, and Cache = 10 Mb (I didn't play with changing Cache...)
4. Using Recovery I installed the two zip files:
4.1. The latest Evervolv ROM from here: http://evervolv.com/devices/passion ( ev_passion-nightly-2014.07.16-squished.zip )
4.2. "GApps Minimal 4.4.4" which is 23Mbytes in size using link from this page: http://forum.xda-developers.com/google-nexus-5/themes-apps/standard-minimal-gapps-t2012857
The two ZIPs currently occupy about 231MBytes in /system (check this using "df" command in the stock "Terminal emulator" application)
5. Of course I extensively did "Wipes" before and after any changes, for a case...
6. Having "Play Store" app in the system, I was able to install several other Google apps: Calendar, GMail, Keep...
Result: I'm pretty happy to have my old Nexus One as a temporary replacement for my lost Galaxy S3. I'm even thinking of buying smaller (than Galaxy S3) phone next time
Performance is quite acceptable so far. Will report later on the experience...
The flight is normal
After two weeks of usage I would say that the new firmware is really usable in a simple "phone-email mode" and I'm happy with the move:
- The performance is mostly acceptable for these my everyday applications, which I installed: Dialer, GMail, Calendar, ColorDict, Pocket, AndStatus, Total Commander, Yandex Maps, Google Keep, Tasker, Volume locker ...
- No unexpected reboots so far. Sometimes I encountered freezes, but occasionally this occurs on my new Galaxy Tab Pro also, so I don't blame the firmware build here...
- I successfully upgraded to the newer nightly build, reflashing system + the same minimal Google apps.
Of course, old hardware cannot fully replace a new one , so:
- There was no memory to install Chrome, Dropbox and WhatsApp (I guess they require too much RAM...)
- "2048" game lags noticeably
yvolk said:
Of course, old hardware cannot fully replace a new one , so:
- There was no memory to install Chrome, Dropbox and WhatsApp (I guess they require too much RAM...)
Click to expand...
Click to collapse
Do you use memory tools like Mounts2SD or Link2SD? I use Opera, Dropbox, WhatsApp and many other apps with no problems on my N1 with KitKat :good:
Although Google Maps lags much more than the old version on Gingerbread but that's not the ROM's fault.
239 said:
Do you use memory tools like Mounts2SD or Link2SD? I use Opera, Dropbox, WhatsApp and many other apps with no problems on my N1 with KitKat :good:
Although Google Maps lags much more than the old version on Gingerbread but that's not the ROM's fault.
Click to expand...
Click to collapse
At first install of the rom, I tried Mounts2SD. The rom was slow and unstable. So I reinstalled the rom and used the builtin Apps2sd with y/y/n (apps and dalvik-cache mounted on sd-ext). Works fine as daily driver.
DISCLAIMER: though this seems safe, there are always risks. Warranty may be void, bugs might crawl out of your shield. I am not responsible for mishaps, bugs, crashes, damage, loss of jobs, girlfriends, and/or if your shield turns into Skynet and begins to destroy the human race!
Firstly, throughout this tutorial I will be shamelessly pointing you toward others threads. Please, give them your thanks. They are masters in their fields and with out them none of this would be happening! Also remember noone gets paid for any of this, they with their skills and I with time do this out love for tech and a desire to help others and see them enjoy their tech as much as we all love ours. That said... Onto the cookies!
*********PLEASE NOTE*********
*********THIS ENTIRE PROCESS CAN BE DONE WITH OUT ANY ACCESS TO A PC!
--BUT--
TO KEEP A LOCKED BOOTLOADER AND AVOID WARRANTY NASTYNESS PLEASE READ
*If you are still on a locked bootloader, and want to easily keep it. Root ota 2.2.1 first, install flashify, and use it to install twrp.
*Rooting ota 3. 0 and using flashify from there will also preserve locked bootloader.
*Rooted ota 2.2.1 or a custom recovery will break nvidias native ota system. You will have need a copy if the FULL OTA from the links provided. They flash easily in twrp. But ONLY THE FULL OTA, NOT THE INCREMENTAL.
******PREREQUISITES (These Are Required)******
*Must be rooted.
If coming from stock, (unrooted, stock recovery, and locked bootloader) Kingroot will root any ota so far.
Install apk, run it, it will most likely reboot your shield, on ota 3 it will freeze, (mine did at around 30% on ota 3, but instead of a reboot, I got a freeze) this is normal. Hold power button until the shield turns off. Boot back up, and run Kingroot again. It should now complete fine, installing Kinguser as root control app. This gives you enough root to run flashify from play store to install the next step. (thanks to China for making kingroot and whoever translated it for us)
Kingroot link: http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
*Team Win Recovery Project (twrp) must be installed.
Head over here to @Steel01 thread for multi rom twrp. You will only (at the moment) need his modified twrp build. More instructions there. Don't forget to thank him! (Thanks @Steel01)
@Steel01 multi rom twrp thread: http://forum.xda-developers.com/shield-tablet/development/multirom-v30-unofficial-port-t3025355
*ota 3.0 FULL OTA (thanks to @MidgetMob)
Link: http://forum.xda-developers.com/shi...k-recovery-images-ota-library-guides-t2988881
*MEGA may or may NOT work. Mega has issues from time to time. (thanks @Ctrl_Alt_Del for the heads up)
****If MEGA links are not working, here's another source.
Thanks @gavin-phelan for the links.
OTHER Link for full ota: http://forum.xda-developers.com/shield-tablet/general/android-5-1-t3115536
*SuperSU recovery flashable installer. (thanks to @Chainfire)
Link to supersu beta (beta works better for the xposed framework):
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
*Fdroid store for selinux mode changer (needed for viper) and ad away apps! (thanks Fdroid!)
Link: https://f-droid.org
*****OPTIONAL*****
*Xposed super alpha for Android 5.1 (sdk22) (thanks @romracer)
Link: http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979
You must read that thread a bit. You will need the xposed installer from the main xposed lollipop thread. (thanks @rovo89)
Main xposed thread
Link: http://forum.xda-developers.com/showthread.php?t=3034811
*Gravitybox works on 5.1 now (thanks @C3C076)
Link: http://forum.xda-developers.com/xposed/modules/app-gravitybox-v5-0-0alpha-tweak-box-t3037566
*BusyBox - Busybox is required for viper4android install. Make sure to run and install it BEFORE YOU INSTALL VIPER DRIVER. The apk can be installed, but when you run it. It will try to install the viper driver. Selinux must be set to permissive, and busybox installed first.
It can be found in play store.
*selinuxmodechanger can be found in fdroid repository.
*ViPER4Android audio engine (thanks @zhuhang)
For viper install. Be sure to install fdroid and get selinux mode changer. And change to permissive BEFORE YOU INSTALL VIPER DRIVER. the app is fine but for the driver to install selinux must be set to permissive. After that it's fine to set it back to enforcing.
Link: http://vipersaudio.com/blog/?page_id=48
Forum:
http://forum.xda-developers.com/showthread.php?t=2191223
Someone said cookies? (Procedure)
**tip** titanium backup SUCKS FOR backing up app data. Bugs out the apps sometimes. So for games, manually backup saves and place them back after reinstall. It's helpful to use tibu to backup your apps alone. Then use tibu again to make a recovery flashable zip to reinstall them all at once....
*Firstly you will need a root enabled file browser (I use es file explorer)
*On the internal memory, firstly back up any pics or ANYTHING you want saved from internal memory to the external SD card. (I usually name my backup folders starting with a # to keep them separated from anything that's written to external via an app or the system. Helps to keep track.)
*Next delete it ALL. In es file Explorer just as everything in sdcard0. /android gone, all folders, ax them. I even nuked the hidden folders and all. I wanted a totally clean install. So anything in the /sdcard0 folder can get wiped. As wiping through twrp DOES NOT WIPE THESE FILES. And sometimes can cause oddness on new installs. This can also be achieved through twrp but it takes longer. Keep in mind that everything inside /sdcard is rebuilt on FIRST boot. Hence deleting in twrp. Don't navigate to straight / things go bad if you mess about in those files....
*After everything has been deleted on internal, and the folders your not using for backups on external. Namely the /android folder on external. You should be ready to reboot to recovery....
*Now reboot into twrp. Click wipe, advanced, then check dalvik, system, data, and cache. Wipe
*Now flash the FULL OTA for your model of shield.
*Next click the home button in twrp. Then Mount, then, uncheck the box for system, then, re-check it. (remount system)
*Now click on the Home button again, Advanced, File Manager.....
*Now the fun part...
Navigate to /system/app and delete the following FOLDERS, contents and all, by clicking on each folder one at a time, once clicked, it will show you contents of that folder. At the bottom click select, then delete, swipe to delete. For each of the following folders....
++*NOTICE* Some of these folders contain libs (library files) and i discovered some issues with deleting them. (videos not working, possible connection console mode crashing, etc) These folders are indicated below, and any side effects possible due to its removal. Console mode has been solid so far even without the libs. That doesnt mean that it wont cause any issues later and i just havent seen it yet. So BEWARE o0o0o =D
Adobe reader
Books
Calendar
++**Chrome (I use chrome beta) (CONTAINS LIBS) possible connection to the "great chrome slowdown" These ARE SAFE to remove and removal may cure the slowdown bug. either way, using any browser BUT chrome (i.e. Chrome Beta, Dolphin, Opera etc.) also fixes the "Chrome slug races"
Cloud print
Input methods for Japanese and Korean (unless you need it)
++**Drive (CONTAINS LIBS) i havent noticed any side effects from removing these and SHOULD BE SAFE to delete. also i use es file explorer for drive access
Email (I use inbox)
Evernote
Evernote widget
Exchange2
Gmail (I use inbox or reinstall from store)
++**Hangouts (CONTAINS LIBS) i use hangouts for OUTGOING PHONE CALLS, as such i feel these libs are POSSIBLY NOT SAFE to remove. i havent found any issues so far but BETTER SAFE THAN SORRY on an essential core sytem
Holo spiral
Google tts (optional)
Juswrite (I don't use the stylus or handwriting)
latinIME (aosp keyboard)
++**Maps (CONTAINS LIBS) i havent found any issues but NAVIGATION to me is an essential core system therefore i feel these are POSSIBLY NOT SAFE to remove. again BETTER SAFE THAN SORRY
Music2 (I use gonemad music player or reinstall from store)
Newstand
Nvcameraawesome (it sucked and I use camera51)
Phase beam
Play games
++**Print spooler (CONTAINS LIBS) never use(d) it so i dunno really. SHOULD BE SAFE to remove (feedback welcome)
Street
Stylusmobileoem (like I said I don't even HAVE a stylus (unless someone has an extra they are willing to mail....)
Talkback
Trine 2 (unless you like it)
Twitch (unless you use it, also in play store)
++**Videos (CONTAINS LIBS) I had issues playing embedded videos in play store (app trailers) and some websites. i would recommend DO NOT REMOVE THIS. i ONLY left this here for info only. remove ONLY AT YOUR OWN RISK
Write (again with stylus stuff)
++**Youtube (CONTAINS LIBS) never had any issues removing this. but i feel it could be related to my above mentioned video playback bug. this is OPTIONAL.
*now navigate to /system/priv-app
Delete folder musicfx (needs to be gone or disabled for viper4android audio install)
*now navigate to /system/vendor/app
Delete the folder watercolor (dabbler can be gotten from play store)
*if you feel busy /system/media/audio is where the ring tones are and you can delete the ones you don't use for more space but it's only 3mb....
*FINALLY hit the home button in twrp again.
**DO NOT FORGET** Install superSU beta for root!!!
*REBOOT!!
*After system boots up and gets done optimizing, it's safe to reboot back to twrp and flash the xposed framework.
*You're done! That's it... Wait... What? You want even MORE cookies? Well, OK....
*Keep reading for optional steps for even better results!
***PS... Keep checking our friend's @BitOBSessiOn and @twistedumbrella threads for really great kernels for our ota..
Thanks @BitOBSessiOn
Thanks @twistedumbrella
Links:
Bito: http://forum.xda-developers.com/shi.../tweaked-kernel-nvidia-shield-tablet-t3069776
++++++ ***check out @BitOBSessiOn thread, ota 3.0 source built, optimized kernels for all models released!
NEW UNIFIED BUILDS FOR OTA 3.0 (ONE FILE FOR ALL MODELS)
Twistedumbrella: 2.2.1 ONLY http://forum.xda-developers.com/shi...t/stock-lollipop-kernel-cifs-support-t2967839
And some more post script.
PPS **tips**
*System apps always keep a copy of themselves for when it gets updated, so all those apps (that you just deleted) end up being over 400 mb after they all update once. And they ALL HAVE updates at time of install. So you save there. Just takes a minute to reinstall as user apps from the play store,and save a bunch of space.
***WIFI ISSUES!** If you do NOT HAVE a 5ghz router. Go to wifi settings, advanced, wifi band, switch from auto to 2.4ghz, makes the Web run faster and if it's set to auto I notice a good 40 second delay in wifi connecting. Also make sure the box "wifi always scan" is turned in. Otherwise wifi doesn't auto connect at boot.
*Get folder mount from the play store. It automagically patches android to let apps write to external SD. As well as links folders on external to internal so you can move ANY app to sd card. Profit!
*For a cleaner install. Install fdroid, then ad away. And run ad away before you ever open more than play store for es file Explorer to install fdroid. This way ad away is the first or one of the first apps to open. Blocking ads from that point on. That way if apps have built in ads, they won't even be able to load!
*Also thanks to @djdarkknight96 here's a link for a bad ass themed SwiftKey keyboard
http://forum.xda-developers.com/showthread.php?t=1016053
*To improve system responsiveness, enable developer options (In settings, click about tablet, click build number 7 times.) Then in developer options about midway down, turn "window animation scale" "transition animation scale" and "animator duration scale" from 1.0 to .5 this increases the speed of animations throughout the system/rom
*After installing the gravitybox xposed module, you can turn those 3 animation scales down further to .25 for even faster response.
*Native lcd density for shield tablet is 283.
It comes stock at 320
*Nvidia corporate tegra color scheme. Green is hex (#76b900) rgb (r:118 g:185 b:0), and grey, hex (#5c5c5c) not sure greys rgb. And black.... I looked it up in their corporate and product guidelines pdf.
*You can add apps to console mode by clicking the little + symbol under "android games" and "media apps" in shield hub. They will then be added to the "easier" to navigate shield hub menu.
*In the play store kernel adiutor (yes that's how it's spelled) allows control over the cpu speed and other critical stuff and things. To squeeze alot more juice from your battery, if everything else here is done, I found I could clock the cpu @2ghz (200mhz down from stock) and it's just as fast as true stock. Killer battery savings on top of the improvements already made in ota 3.0
*If you adjust the clock speeds in kernel adiutor... Make sure to reset the minimum to 51 every time and sit and watch to make sure they stuck. They will float around, then settle. But if you exit after altering the max and the minimum is floating high, it will set the minimum to that value.... Found THAT out the hard way......
*The letters that form the word "SHIELD" on the back of our devices.... Are stickers in small indents.... Looks really kewl if taken out. (see post #13 for pics)
+ *POSSIBLE USB ON THE GO (OTG) FIX*
Power off your shield, plug in USB OTG cable with a flash drive in it. Power on the shield. Once booted, pull flash drive and use whatever OTG compatible device you wish (mouse, keyboard, micro missile launcher--thanks ThinkGeek!))
ONE CONDITION! This method BREAKS CHARGING UNTIL NEXT REBOOT! (thanks nvidia!)
Enjoy!
Questions and comments always welcomed and encouraged!
If i forgot something, missed a step, whatever. Let me know!
I'll update/add to this if/when I think of things.
Ideas? Let me know!
CHECK POST #2 FOR UPDATE TIMES.
I'll try to highlight changes until I update again.
Look for the + symbol
Cheers,
Cyris
Mmm cookies just like mom makes!
Just a reminder! ALWAYS CHECK THE MD5 CHECKSUM FOR DOWNLOADED FILES. Md5 checker in play store works great. It can certainly save some headaches!
A SECOND MORE IMPORTANT REMINDER, KEEP A COPY OF YOUR FULL OTA IN THE ROOT OF YOUR EXTERNAL SD CARD. THAT WAY IF THE LIQUID DEFECATION TRULY STRIKES THE AUXILIARY ROTOR. YOU CAN USE NVIDIAS BACKUP STOCK RECOVERY (AT BUGDROID (ANDY ON HIS BACK WITH A RED ! OVER IT) HIT "VOLUME UP" + "POWER") TO WIPE DATA AND FLASH A STOCK FULL OTA AND GET BACK UP AND RUNNING AGAIN. THEN USE KINGROOT, THEN FLASHIFY, THEN TWRP, TO GET ROOT BACK AND CUSTOM RECOVERY....
**UPDATES**
Times are Pacific (my local)
+Initial post 5/25 @ 1300 (apx)
+Updated 5/25 @ 1655
+Updated 5/25 @ 1730
+Updated 5/25 @ 1810 - make sure you check this one for viper audio install
+Updated 5/25 @ 2304 - new full ota links
+Updated 5/26 @ 1030 - @BitOBSessiOn ota 3 kernel release, links posted
+Updated 5/26 @ 1546 - Added usb-otg temporary fix
+Updated 5/27 @ 2200 - Cleanup OP, removed old + symbols
+Updated 6/17 @ 1430 - Added info on folders containing LIBS in the wiping section.
Nice! I will report back once I have redone my tablet.
And please, give me some time. It's the end of a holiday weekend & I have a few things to do before going back to work Tuesday.
Ctrl_Alt_Del said:
Nice! I will report back once I have redone my tablet.
And please, give me some time. It's the end of a holiday weekend & I have a few things to do before going back to work Tuesday.
Click to expand...
Click to collapse
No worries. I created this thread for a laid back easy way to (try) and get the most from our device. Xda was always my go to place to find help and it's a bit different now. Not everyone is a developer, but it shouldn't be hard to get knowledge from those that are. Hell I'm no dev, just like to test stuff, a crack flasher. But at one time I didn't know what root was..... We all were. I know I love it when I show someone my device I spent 100s of hours tweaking just right and the look on their face! At one time that was me. I had to ask questions that probably got a few chuckles. But usually there was someone there to ask. If i can help I figure I SHOULD,
As I said I encourage questions. It may help someone else later on. Cheers!
... Wrong button.....
All is well. And the wipe,install directions from TWRP went flawlessly.
As soon as it booted, I was presented with the Welcome screen, as if it were a brand new device, unlike just updating an older OS. Chose the language, if I had a Google account & signed in...all that cookie dust. Apps from the list I have backed up to the Google servers under my account downloaded & installed automagically.
And best of all....no more "Android is Starting" & no more "optimizing the apps" at cold startup! Big thumbs up there! :good:
By the way, I could not get the full install from the link you provided from another user. It went to Mega & Mega is having transfer issues. It would download about 10 thru 15 % then flash something about a transfer error, then reduce the file transferred back down to 8 or 9 %...then download that again up to around 12 % or so, then back down to 8 %....lather, rinse, repeat...indefinitely! I used this user's link in his post to get the correct ROM: Android 5.1 out now
Just an FYI there.
Ctrl_Alt_Del said:
All is well. And the wipe,install directions from TWRP went flawlessly.
As soon as it booted, I was presented with the Welcome screen, as if it were a brand new device, unlike just updating an older OS. Chose the language, if I had a Google account & signed in...all that cookie dust. Apps from the list I have backed up to the Google servers under my account downloaded & installed automagically.
And best of all....no more "Android is Starting" & no more "optimizing the apps" at cold startup! Big thumbs up there! :good:
By the way, I could not get the full install from the link you provided from another user. It went to Mega & Mega is having transfer issues. It would download about 10 thru 15 % then flash something about a transfer error, then reduce the file transferred back down to 8 or 9 %...then download that again up to around 12 % or so, then back down to 8 %....lather, rinse, repeat...indefinitely! I used this user's link in his post to get the correct ROM: Android 5.1 out now
Just an FYI there.
Click to expand...
Click to collapse
Glad to hear it went well. And thanks for the info on mega. It does that from time to time. Could be alot of people trying to get that file right now. Links updated.
If you go through the xposed install and all. It gets spooky fast....
can you explain about screen density? native 283? how do you know that? table has 320 dpi
Excellent guide and info. Spent all weekend formatting and dealing with "optimizing apps", this fixed it all, great tablet now
GOALAR said:
can you explain about screen density? native 283? how do you know that? table has 320 dpi
Click to expand...
Click to collapse
It's an 8 inch screen. With a resolution of 1920x1200 I'm not sure the math, but it adds up to 283,or there are a few sites that you can go to and enter your the screen info and it will tell you what you density is. Density is how many pixels are in a square inch. Also GSM arena and a few other sites show this data if you Google "shield tablet specs".
Switching from 320 to 283 just makes the screen look sharper. It also can effect what games are listed as compatible in the play store. Example, dead space and dead trigger 2 will not install @ 283. But will run at it. I have dead space myself and it plays fine but I have to side load it or set my density back to 320 in build.prop then install it.
Think of it like running different resolutions on your pc monitor. The monitor will show them just fine, but only 1 is the exact spec from the factory, and look the best.
Thanks For This
Hi, @Pariahnoble. Just wanted to say that this is great, exactly the kind of effort that supports the XDA community.
I am sure that this will be a huge help to a lot of people.
koop1955 said:
Hi, @Pariahnoble. Just wanted to say that this is great, exactly the kind of effort that supports the XDA community.
I am sure that this will be a huge help to a lot of people.
Click to expand...
Click to collapse
Thanks! =D Just hope it does in fact help some folks enjoy their shields a little more. I've been pretty unhappy so far, it was this or a Nexus 9, now I don't regret my decision anymore lol
Pictures of back of shield with letter stickers removed
Updated again
I'm surprised there aren't more comments on this thread. This looks great.
By the way, did I miss something or can this actually be done completely without the use of a computer?
radio five said:
I'm surprised there aren't more comments on this thread. This looks great.
By the way, did I miss something or can this actually be done completely without the use of a computer?
Click to expand...
Click to collapse
Nope didn't miss a beat. This whole process can be done with no pc (I don't have a pc, my shield is my ONLY device.) so I've learned how to do it all locally (on board the shield itself).
This is only just now available, 5/13 kingroot was released that would root the tablet stock off the shelf. And flashify to put on the custom twrp. After that it's good times!
Ps, thanks for the heads up on the no pc thing, I forgot to mention that, OP updated...
That's great news for me since my computer recently took a **** and I'm about to throw my old laptop out the window. (windows vista, won't take adb drivers, runs out of memory using chrome, etc...)
Sent from my SHIELD Tablet using XDA Free mobile app
radio five said:
That's great news for me since my computer recently took a **** and I'm about to throw my old laptop out the window. (windows vista, won't take adb drivers, runs out of memory using chrome, etc...)
Sent from my SHIELD Tablet using XDA Free mobile app
Click to expand...
Click to collapse
Ouch! I feel your pain. I recently had to try to flash using add (adb but "add" was a great typo) on Windows xp.... Oh yeah... THAT went well.... Then 2 days later kingroot came out.
Just make sure (and I'll add this to the op as well) to keep a copy of the full ota on the ROOT of your external SD card, that way if your shield take a flaming deuce in your hands, you can STILL use nvidia backup recovery. If you have ever seen the "bug droid" (ole Andy on his back and the flaming red ! Over it) hold the "volume up" button and hit power and the nvidia recovery comes up. Let's you flash a STOCK FULL OTA and bam, back in business, just kingroot, flashify, twrp, keep calm, and carry on!
Man, I'm glad you said something! I'm gathering all the files on my external sd card in a folder (downloads/Shield Optimization) and I was getting ready to take the plunge. I'll move everything to the sd card's root before I get started.
I'm also considering backing all of my sd card to a work computer temporarily so I can reformat it. My junk heap of a laptop can't read it but I suspect my shield may have formatted it to a weird..... format.
I just want to have the card ready in the event I want to transfer large files and not wait as long.
Speaking of which, would I be able to format my sd card via my PC with it still in the Shield, connected by a usb cable?
Sorry if I'm getting slightly off topic.
Sent from my SHIELD Tablet using XDA Free mobile app
@radio five
Firstly the only file you really need in the root folder is the ota zip. That's only because I'm pretty sure that's where the stock recovery will look for it, IF everything goes to hell.
Yes about formatting your card or storing files elsewhere during all this. The closer to a fresh card and internal memory the better.
Not sure what if any besides ntfs that the shield would format it to. But ntfs is recommended. And it's so far the only (I think) supported format for cards over 32gb. Also. After you format it to ntfs, quick format is OK, full is better but much slower on Windows, make sure to name it. Any is OK. "Sdcard" works.
In Windows Explorer, click on the volume (Sdcard you just formatted) to select it. Wait a sec. Then click it again. And name it when it highlights.
It fixes SOMETHING, Noone really knows what, but makes the shield recognize SD cards over 32gb
I'm sure there IS a way to format via adb, but I have no idea how...
What topic? >.< lol all questions are encouraged.