CS968 a RK3188 ChipSet Based TVBoX
AKA: TV01 [GeekBuying] CR11s [CloudNET2GO]
IMPORTANT NOTICE:
THIS IS KIND OF BETA/ALPHA FIRMWARE OR WHATEVER YOU WANT TO CALL IT.
CURRENTLY I HAVE EXPERIENCED NONE PROBLEM AND IT SEEMS EVERYTHING INCLUDING 1080P MODE WORKS FINE.
THIS IS AN EXCLUSIVE ROM BECAUSE THERE ARE A FEW THINGS FACTORY FIRMWARE HAS NOT.
SYSTEM IS SAME AND NOTHING HAS BEEN MODIFIED EXCEPT SUPERUSER and BUILD.PROP, SO IF THERE IS A BUG THEN THAT IS FIRMWARE RELATED THIS ISN'T SUPER DUPER FIRMWARE AND DOESN'T HAVE SPECIAL KERNEL OR RECOVERY, EVERYTHINGS IS STOCK
Now lets have a look:
Factory Date : 05-11-2013 from CloudNET based CR11/s
Modification Date: 09-12-2013
UPDATE : I'VE CREATED V1.1 1080p VERSION OF 720p ROM.
THERE ARE MAJOR AND MINOR CHANGES, READ BELOW.
NOTE: V1.0 IS 720P SO WILL BE AVAILABLE TO DOWNLOAD.
NOTICE: THIS IS FOR 2 MPX VERSION, NOT FOR 5 MPX
You may harm your device, if you flash this firmware to 5 mpx camera version.
Features:
Rooted
Build tweaks
TCP Tweaks
Networking Tweaks
Wifi Tweaks
Multimedia Tweaks
Streaming Tweaks
HW Video Acceleration by default
Spoofed as Galaxy S3
Date format set to European
Timezone Europe GMT +1
Add: SuperSU.apk
Add: LuckyPatcher
Add: RootExplorer
Add: OGYoutube with downloader [ Original youtube still can be apartly installed ]
Add: Dolphin Browser 10.4
Add: MXPlayer
Add: Android Weather
Add: JetAudio
Removed : All of useless chinese media stuff
Removed : Chrome
Removed : Search Box
Removed : Gmail
Removed : Email
Removed : XBMC Installer (Not everyone's taste)
Removed : A few more crap...
Exclusive test modules : Tun, Cifs, NFS, NTFS and Xpad these modules are not installed by system, must be done manually from console/terminal
Exlusive bootanimation
Good working Remote Control
Faster Internet browsing
And possibly a few things what I don't remember.
Feel free to test or build new one, no words for future updates or versions etc.
FLASH WITH YOUR OWN RISK, I'M NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY FLASHING OR AFTER.
Antutu results :
Download v1.0:
dev-hOST
Password : cs968
v1.1b CHANGES [1080P]
Add: 1080p support
REPLACED: MXPLAYER -> BSPLAYER (BAD CODECS)
REPLACED: ROOTEXPLORER ->ROOT BROWSER
ADD: CIFS MANAGER
ADD: Texdroider DPI
ADD: BLUEPUT (GAMEPAD CONTROLLER APP)
UPDATE: LUCKY PATCHER
UPDATE: ADAWAY
UPDATE: SUPERSU
REPLACED: WALLPAPER AND BOOTANIMATION FROM V2
UPDATED TWEAKS
More optimized Video playback, more stable system.
ANTUTU RESULTS:
Download v1.1b
DEV-HOST
password: cs968
Great job!
2M, ok.
720p or 1080p?
Tks.
webipsum said:
Great job!
2M, ok.
720p or 1080p?
Tks.
Click to expand...
Click to collapse
I think 720p based firmware, however you can set output to 1080p with no problem, but I guess screen resolution remains 1280*800 or so.
Other things are well better than original firmware, faster internet and smooth 1080p mkv playing, at least I haven't seen any problem.
This is only rootet firmware for CS968 at moment, I think?
I've uploaded Antutu results on first post.
Any plans on working on a 1080 kernal?
This is great! Any plans for the 5mp camera? Or does anyone know where one is available besides the one CloudNetGo posted last month?
EQUANCY said:
I think 720p based firmware, however you can set output to 1080p with no problem, but I guess screen resolution remains 1280*800 or so.
Other things are well better than original firmware, faster internet and smooth 1080p mkv playing, at least I haven't seen any problem.
This is only rootet firmware for CS968 at moment, I think?
I've uploaded Antutu results on first post.
Click to expand...
Click to collapse
First custom Rom was at freaktab since 23/10
http://www.freaktab.com/showthread.php?7677-CS968-Custom-Firmware-quot-GEASS-quot-ver-1
Good job but Is it possible to take into account in future versions of the problem associated with the problem of dropped frames during playback is hd video with a frequency of 24hz?
RASTAVIPER said:
First custom Rom was at freaktab since 23/10
http://www.freaktab.com/showthread.php?7677-CS968-Custom-Firmware-quot-GEASS-quot-ver-1
Click to expand...
Click to collapse
I didn't said this is the first custom rom, I said :
"This is only rooted firmware for CS968 at moment, I think?"
Because there wasn't any information on the rom page about root and I also seen myself after flashing the rom wasn't rooted, atleast it isn't worked for me.
I hope you understand this time.
And for the record:
This is a soft-modded rom, none of system files except superuser (su, supersu.apk, busybox) and buildprob has been touched, because of that the other modification or remake or re-edit is different than this rom.
For your consideration.
Meta-l said:
Good job but Is it possible to take into account in future versions of the problem associated with the problem of dropped frames during playback is hd video with a frequency of 24hz?
Click to expand...
Click to collapse
Actually it is very hard to answer that question.
I think, Frame dropping is a problem that happens while optimisation between GPU and CPU.
Meaning of optimisation is about decoding:
For our android devices there are a few custom HW decoders on the market (MX, Vitamio etc) and not all of them have been wroten for each SOC, and each manufacturer has sometimes different ways to decode multi media data.
I mean, Hardware based video decoding needs more optimisation for the synchronisation between CPU and GPU, also needs well compatible drivers too.
Because for arm based devices, HW decoding needs CPU manipulation, thus drivers, drivers, drivers...
For our rk3xxx based devices there is no fully optimised drivers for MALI-GPU, they provide what just ARM provides self.
So, we can simply see that difference while playin any HD or FullHD video on Exynos 4412 chipset based device.
Both devices have same GPU (MALI400-MP4) but Exynos performs much better.
And for the link which you sent me as pm.
I guess tweaking or modifying kernel drivers wont help as much as you expected, itsn't that simple.
Actually your chance lies on luck, kind of gambling.
But I don't know, it seems more testing is necessary.
RockChip must provide good drivers for the manufacturers, re-engineering or re-mastering may help somehow but not at all.
But may be skilled linux devs can improve drivers.
For me, arround 16 gb 1080P movie plays like charm, ofcourse there is frame dropping but not disturbing at all.
And LCD clock last thing you have to worry about.
May be I could be mistaken and know wrong, If someone explains better then we both know better.
EQUANCY said:
I didn't said this is the first custom rom, I said :
"This is only rooted firmware for CS968 at moment, I think?"
Because there wasn't any information on the rom page about root and I also seen myself after flashing the rom wasn't rooted, atleast it isn't worked for me.
I hope you understand this time.
And for the record:
This is a soft-modded rom, none of system files except superuser (su, supersu.apk, busybox) and buildprob has been touched, because of that the other modification or remake or re-edit is different than this rom.
For your consideration.
Click to expand...
Click to collapse
Geass custom Rom is rooted too.
I can confirm that.
Thanks for your rom!
mow4cash said:
Any plans on working on a 1080 kernal?
Click to expand...
Click to collapse
Released...
CS968 Exclusive MODDED ROM EQS-v2.0 1080p
RASTAVIPER said:
Geass custom Rom is rooted too.
I can confirm that.
Click to expand...
Click to collapse
Okey, but Lucky patcher didn't worked with that SU, whatever if you say the other rom was rooted then I believe you, will change previous post.
GeekEric said:
Thanks for your rom!
Click to expand...
Click to collapse
Your welcome :good:
Added 1080p support for firmware of November, Antutu performance decreases a bit, however MediaPlayback smoother and device runs faster.
I think the new kernel focuses mostly 2D performance and VPU.
But both firmwares will be available for downloading as apart (First post).
EQUANCY said:
Added 1080p support for firmware of November, Antutu performance decreases a bit, however MediaPlayback smoother and device runs faster.
I think the new kernel focuses mostly 2D performance and VPU.
But both firmwares will be available for downloading as apart (First post).
Click to expand...
Click to collapse
Unfortunately I have 5MP camera version
Any plan to support this?
Thank's
dony71 said:
Unfortunately I have 5MP camera version
Any plan to support this?
Thank's
Click to expand...
Click to collapse
Sorry but I don't have 5 mpx version to test, so I can't
May be changing camera module with this firmware may work but it is risky and I don't suggest.
Hello everyone, i installed it, but for some strange reason, XBMC is loading on WIndowed mode with this rom. Anybody else have this problem? Ty in advance
lanc3lot said:
Hello everyone, i installed it, but for some strange reason, XBMC is loading on WIndowed mode with this rom. Anybody else have this problem? Ty in advance
Click to expand...
Click to collapse
Which version did you flashed? 1.0 or 1.1b, actually I've never seen that but it is strange, have you installed XBMC from where?
Ty for the reply,
I have the December Gotham build installed (got it from .org site), and the 1.1b version. It doesn't allow me to even touch the option, it's grey.
I have connected CS968 to a Samsung, 2013 Smart Tv Full Hd model
lanc3lot said:
Ty for the reply,
I have the December Gotham build installed (got it from .org site), and the 1.1b version. It doesn't allow me to even touch the option, it's grey.
I have connected CS968 to a Samsung, 2013 Smart Tv Full Hd model
Click to expand...
Click to collapse
Would you try these steps?
Uninstall/Remove your own XBMC first.
Download XBMC linked app from this link
Copy this file to an USB drive or direct to your device, where ever you want, just remember where it is.
Go to your TVBox, open RootBrowser and forward to place to where you put xbmc.nm
Copy xbmc.nm file to :
../sytem/app
DO NOT RENAME OR CHANGE EXTENSION TO ANYTHING, LET IT SO REMAIN.
Reboot your device...
Ty for your input mate. I will get back to you later today, as i am at office at the moment.
Related
What is in the package:
Multilanguage Honeycomb 3.2
* Deodexed
* Rooted/Superuser
* Zipaligned
* Google Music 3.01 (Sync your music with google)
* Google Video Editor
* Google Talk/Maps
* 3D Photo Browser
* Bash/nano
* Added modules: Tun (openvpn support)/cifs/nls utf8
Kernel 1.1:
BIG thanks to roggin for releasing his source.
Added features:
Voltage control (use setcpu for controlling uv).
Update to 2.6.36.4
OC to 1.64Ghz
memcpy performance patch (14% increase)
Updated wifi driver
BFQ
automated per session task groups
Flash kernel with recovery (only for honeyvillain and stock rom):
http://xda.richardtrip.org/Acer/a500/kernel/Villain_iconia_kernel_2.5.zip
Sources https://github.com/richardtrip/Iconia_a500_3.1
First you need to install the recovery from here:http://forum.xda-developers.com/showthread.php?t=1126364
or use the market app from here: https://market.android.com/details?id=com.interphaze.AcerRecoveryInstaller
Reboot to recovery and make a backup. After that you can wipe data and flash the rom.
You can disable mobile data in /system/build.prop (uncomment ro.carrier=wifi-only)
Download 3.2 Version (OC-UV kernel integrated): http://xda.richardtrip.org/Acer/a500/HoneyVillain_1.2.zip md5sum:f85969a17afe65b723f29cd5c5321b28
New 3.4 OC-UV kernel: http://xda.richardtrip.org/Acer/a500/kernel/Villain_iconia_kernel_3.4.zip md5sum:15b8d753417c35116b5ef2034d442960
Fixes for HoneyVillain 1.1:
Photo Editor FC Fix
Camcorder fix
Download 3.1 Version (OC-UV): http://xda.richardtrip.org/Acer/a500/HoneyVillain_1.05a.zip md5sum:c2ac73576a64ab2cf37a45087f5bf41d
Game addon (NFS and Let's Golf): http://xda.richardtrip.org/Acer/a500/mods/HoneyVillain_Game_addon.zip (flash with recovery)
If you find something missing from this rom ask for updates
Credits and thanks to:
sc2k (itsmagic)
roggin (kernel source)
mdeejay (oc patch)
thor2002ro (recovery)
Reserved
Changelog:
Version 1.2:
Update to 7.006.01
Integrated OC kernel (use setcpu, "pimp my cpu" or System Tuner to overclock or undervolt)
Fixed previous bugs (photoeditor and camcorder fc)
If you want to get rid of the cell-standby uncomment ro.carrier=wifi-only in /system/build.prop
Version 1.1:
Update to 3.2 a501 version (a500 should work fine).
1080p recording
No OC-UV for now (will provide that later).
Version 1.05a:
Fixed GPS problem
Update Superuser.apk to 3.0beta2
the version number is the same in build prop (1.05)
Kernel update to 1.7
Version 1.05
*Changed kernel to 1.06 HoneyVillain (216Mhz-1.0Ghz use setcpu if you want OC)
* You can disable mobile data in /system/build.prop (uncomment ro.carrier=wifi-only)
*Updated to 4.010.38
*Updated su binary
*Added WiFi Fixer service
Version 1.04: (reuploaded)
* Fixed version number
* Fixed mobile networks
* Fixed Google Music (sync is possible again).
Version 1.03:
* Update to final version (Acer_A500_4.010_COM_GEN2)
* HD video is fine now !!!!!
Version 1.02:
* Fixed camera recording
* autoload modules
* Added Google Video
Version 1.01:
* Updates media_profiles for better recording
* Added MusicA
* Added adhoc wifi support (thanks to _motley)
* Added NTFS module
* Added Polaris Office
* USB 3G support needs some testing
Game-pack addon uploaded
1.0:
Initial release of 3.1 acer rom.
Its just great to see a lot of roms available for the iconia!!
Villain is here!!
Thanks Richard!
Honey, you did it!
thx ! download started
Thanks, just what i wanted! Can you post the MD5? I have aa5e49eed4e254134ce1ee64354be40
edit: nevermind
edit 2: flash went perfect, rom is very fast. Everything is working great, just like 3.1 out of the box with a little root sprinkles on top I like having Dolby back, one of Iconia's strengths.
I'm looking forward to giving this a run. Great work!
work well!
thanks
Very nice indeed, thanks......
i whink this rom is the nearest to stock rom...
want to know what acer actually fix in this long awaited rom
downloading it now
I've just noticed something interesting. I attempted to play the same test files that I played on PRIMEE and can only run them in software rendering mode, however in PRIMEE they ran with hardware decoding. Perhaps Acer has deliberately disabled mkv due to the lack of AC3 support?
I wonder if it's possible to port the MKV functionality from PRIMEE? I have a lot of MKVs that don't have AC3 sound that would be nice to watch without reencoding into mp4 containers.
It'll be a tough choice between SRS and MKV support.
Edit: Scratch that, all the mp4 files I tested on PRIMEE don't work either
INSTALLED and booted well
one issue i got now, external sd in setting - storage says not available, but using file manager HD i can explore to the folders..
Richard, one suggestion I have is to replace the wpasupplicant file to support adhoc wifi. This is important for us non-3G guys.
1) copy to \system\bin replacing the original
2) set exec permissions for all
View attachment wpa_supplicant_xoom_wifi_adhoc.zip
Tested and working, tethered using Barnacle (NAT) on Samsung Galaxy phone.
Can someone try this 1080 mp4 and see if it plays ok? It worked perfectly in Primee but looked like a slideshow in the stock Acer 3.01 and Virtuous Picasso.
http://downloads.dvdloc8.com/trailers/divxdigest/bourne_ultimatum_trailer.zip
HI RICHARD,
i found usb drive bug also, setting - storage dont show anything while i plugged drive, only i can mount them using drive mount
o yeah.. and my usb HDD dont work for long, only bout 3 minutes and the gone.. cant be even seen by drive mount afterwards
chr0m said:
Can someone try this 1080 mp4 and see if it plays ok? It worked perfectly in Primee but looked like a slideshow in the stock Acer 3.01 and Virtuous Picasso.
http://downloads.dvdloc8.com/trailers/divxdigest/bourne_ultimatum_trailer.zip
Click to expand...
Click to collapse
Sadly it's a slide show.
hellcat82 said:
Sadly it's a slide show.
Click to expand...
Click to collapse
So it has to be something to do with the Acer rom as it works fine on a Xoom with 3.01 and Primee on an Iconia. Acer sucks by the sound of it.
_motley said:
Richard, one suggestion I have is to replace the wpasupplicant file to support adhoc wifi. This is important for us non-3G guys.
1) copy to \system\bin replacing the original
2) set exec permissions for all
View attachment 635116
Tested and working, tethered using Barnacle (NAT) on Samsung Galaxy phone.
Click to expand...
Click to collapse
Fixed for next version
Hi ,
thanks for the great rom. Everything is smooth, not tested video though.
I am not able to install acer recovery from the market , in fact it never shows up in the market!
netarchie said:
Hi ,
thanks for the great rom. Everything is smooth, not tested video though.
I am not able to install acer recovery from the market , in fact it never shows up in the market!
Click to expand...
Click to collapse
Maybe you can try market enabler. b.t.w. acer recovery is not mine so i can't support it
HI,
I made some little modification to Dexter's new PRIMEE-P9 ROM included his latest patch 5a.
So all credits to him for this great ROM.
Features:
all the new 3.2 features included
Based on asus 8.6.5.6
2.6.36.4 kernel with CIFS/NFS/3G support, optional OC upto 1700Mhz
Enhanced exchange support
Faster Browser
resizable widgets
multilanguage (All major languages for europe also included)
enhanced task manager
filesystem tweaks
enhanced network driver (tethering enabled for Bluetooth / wifi / usb)
root + superuser included
DLNA support
3G huawei USB dongle support
Storage locations: /mnt/sdcard , /Removable/MicroSD , /Removable/Usbstick1 , /Removable/Usbstick2
Changes:
Removed :
Acer Sync, Asus Reader, Google Books, Layar, MyCloud, MyGazine, PC Sync, Google Videos, Zinio Reader.
Added :
Samsung eBook Reader, Samsung Memo, Samsung Photo Editor, Toshiba Media Player, Acer 3d Photo Viewver, Acer Need for Speed Shift, ES file manager (needed for Samsung ebook Reader), new boot animation, apn and host file.
In near future i try to add more stuff.
Instalation (required root):
Download AcerRecoveryInstaller from Market.
Boot into ClockWorkRecovery (POWER ON and VOL-) and do a full backup.
put ROM zip on your external sdcard and install using ClockWorkRecovery
NEW USERS of PRIMEE - do a factory reset (WIPE) in ClockWorkMod when installing for the first time.
Download:
PRIMEE_p9-5a_davids_mod.zip
Apply this patch to enable 3G support
3g-primee-huawei-patch2.zip
Low audio volume patch
audiopatch-primee.zip
Know Issues:
rotation lock key does not work (it serves no function in Asus firmware)
Installing netflix patch on this rom will for now cause video recording to crash, photo work fine. netflix patch is not working on honeycomb 3.2 roms for now
Kernel source used is based on the unity release
Dexter original ROM here
Credits to: Dexter Pickard, vache and m-deejay
You do all this and you take the risk. But remember if you got the CWM working. I take no responsibilites if you damage or brick your device.
(P9-patch5a)
fixed market install problem for factory reset installed rom setup.
fixed sleep kernel issue
Removed annoying calibration window, that kept popping up all around (Asus bug, i read from users of asus tablet)
Acer3.1 stock avi support now (many xvid / avi files work now)
included ad-hoc wpa_supplicant fix
included "ro.carrier=wifi-only" fix (if you want 3G , use 3G patch)
Fixed dock remote control keys
XT9 Fixed
added new apps: CpuMaster(OC) and TotalCommander
hey David,thx
so what did you mod to Dexter prime 9?
Download link seems to be down for me...
link doesn't work.
working now, sorry for that
Samsung vs Asus ereader app
What is the main difference between the two? The Samsung one was more buggy in my opinion. Where the bugs fixed?
look at changes, i just replace and add some stuff to it.
i have no problem with samsung reader.
I am using dexters primee rom 3.2 and it is very nice...
The only thing, did you fix the screen ripping while browsing?
My test site for browsing is always beforeitsnews.com as it seems quite heavy, and I use it a lot.
The browser in the galaxy rom was far smoother.
MJ-12
this is "fixed" olny in galaxy firmware, but Opera 11 browser is fine.
dmatusek76 said:
this is "fixed" olny in galaxy firmware, but Opera 11 browser is fine.
Click to expand...
Click to collapse
Oh nooo...
But I really like the original browser with its slide navigation
Surely it cant be firmware if it worked with galaxy rom?
galaxy rom is based on samsung base.
dmatusek76 said:
galaxy rom is based on samsung base.
Click to expand...
Click to collapse
Oh ok
I hit the thanks button but its not working?
Sticking with primee for now but keep up the good work Dave.
Cheers
Will give this a try, thanks
Sent from my A500 using XDA Premium App
I know it does say HC3.2,but i have'nt noticed anyone actually being on 3.2 firmware,at least i'm not,my iconia updated,but it still showed 3.1,soo the question is can i run this on 3.1?
Diablo67 said:
I know it does say HC3.2,but i have'nt noticed anyone actually being on 3.2 firmware,at least i'm not,my iconia updated,but it still showed 3.1,soo the question is can i run this on 3.1?
Click to expand...
Click to collapse
I believe if you flash this rom, you will be in 3.2 wether you are currently on 3.1 or even 3.01....acer is currently still using 3.1, no 3.2 released yet but thi rom is based on Asus HC3.2...
yes this is HC 3.2 Asus base, you can flash it on every version firmware you have, just need CWM.
DO A AUDIO FIX Please!> the sound volume seem too low
i have very loud volume in games, movie, mp3.
What exactly makes this different from Dexter's port? Also, I am assuming you asked if you could use his ROM right? I just want to make sure so nobody gets in trouble.
Oppo X909 AOSP Beta by kAmMa
Warning
this is BETA version of AOSP port for Oppo X909. it may brick your device. don't flash it, if you don't know, what you are doing...
if you get into boot-loop after install, try to wipe cache and userdata
Prerequisites
custom recovery (i prefer/use TWRP)
How to install
download ROM (link bellow in updates section)
copy it to device
download Google Apps (http://goo.im/gapps/gapps-jb-20121011-signed.zip)
copy it to device
restart device to recovery
make full backup
install both packages
(optional) install root package (https://mega.co.nz/#!aFAyTAoa!TNKZKnStX6v-cplQfDxA9xUOvX4MyO2SmQutTSPh5_M)
reboot device
profit
Updates
Code:
update - 17.04.2013
=============
beta version released
here is the link - https://mega.co.nz/#!nRggFYoJ!ewPABk-I2tUfHeldtkl4CgP6e1hK9L_eNrjRZYcBMlU
update - 16.04.2013
=============
nfc works
all sensors work
update - 11.04.2013 II.
=============
alpha version released
here is the link - https://mega.co.nz/#!SMRT0ABB!Q1yLikQGj42OqXwZZuQsBk8zePlXVsE34vsZhxJuRbk
update - 11.04.2013
=============
home button works
update - 10.04.2013 III.
=============
gps works
update - 10.04.2013 II.
=============
location services works
update - 10.04.2013
=============
phone works correctly (phone calls are played via Earpiece, microphone works)
its possible to use the phone almost on daily basis => alpha release soon... :)
update - 09.04.2013 II.
=============
wifi works
update - 09.04.2013 I.
=============
bluetooth works
update - 27.03.2013
=============
front camera works
rear camera works
main speaker works
Kernel source : https://github.com/kamma-cz/Oppo-Find5-Kernel-Source
------
Works perfect!!
mobile networks config crashes when I try to config my APN settings
Nice job. ty
Sweet.
awesome! will test this one tomorrow!
I already bought you a pivo, so (please) keep developing this
kamma said:
------
Click to expand...
Click to collapse
thanks your rom,but Battery is not durable，wait fix，and wait jb4.2 :laugh:
... so smooth ...
still setting up everything, but the menus feel so incredibly smooth...
not tried anything else, except wifi works like it should
Nice to see you here Kamma, I used to use your stuff on my 3VO.
Thanks for the port, I'm looking at buying one of these phones if a good AOSP based rom is out for it. When you say it could brick the phone, is there any reason this particular operation is more dangerous than flashing any custom rom on any device or are you just giving a standard warning. This port could also be used as a base for CM10? I
Another Great Rom Thanks!
Seems (so far) to be fully usable - i've used RC Roms more buggy then this!
good job...:laugh:
Definately usable as a 'everyday rom' great work on this.
2 Requests
No NFC support?
Any Chance of adding BLN to the kernel?
n1ck75 said:
Definately usable as a 'everyday rom' great work on this.
2 Requests
No NFC support?
Any Chance of adding BLN to the kernel?
Click to expand...
Click to collapse
Why the heck would you want BLN on a device that has a real notification LED???
Haha,good question.
Allanitomwesh said:
Haha,good question.
Click to expand...
Click to collapse
Everything works for the most part but I too have requests.
NFC to work (Will it be possible to hack the software for the Find 5 to support google wallet?)
Video playback fix
Sheer optimization
osmosizzz said:
Everything works for the most part but I too have requests.
NFC to work (Will it be possible to hack the software for the Find 5 to support google wallet?)
Video playback fix
Sheer optimization
Click to expand...
Click to collapse
GW depends on if Oppo included a secure element with Google's keys or not.
LOTS of manufacturers include this even if their device isn't supported by GW, however occasionally devices show up without an SE. (Last ones I saw were Samsung I9100P and I777.)
Quite simple because the led is tiny. BLN looks good and works well, That was just a request.
However since the phone supports it i would love NFC on this ROM
Entropy512 said:
GW depends on if Oppo included a secure element with Google's keys or not.
LOTS of manufacturers include this even if their device isn't supported by GW, however occasionally devices show up without an SE. (Last ones I saw were Samsung I9100P and I777.)
Click to expand...
Click to collapse
Sucks. Hope they did include it
Sent from my Oppo Find 5
I prepared everything to move over to this rom...
backup up my apps, messages, everything...
now I try to (re)download the rom... get this :
Temporarily unavailable
x909-aosp-alpha1.kamma.zip (144.7 MB)
anybody have the ability to host the .zip elsewhere?
kind regards,
s0h0
s0h0punk said:
I prepared everything to move over to this rom...
backup up my apps, messages, everything...
now I try to (re)download the rom... get this :
Temporarily unavailable
x909-aosp-alpha1.kamma.zip (144.7 MB)
anybody have the ability to host the .zip elsewhere?
kind regards,
s0h0
Click to expand...
Click to collapse
I'm getting the same thing. I tried moving over too but can't download the ROM
Sent from my Oppo Find 5
Requirements:
- CWM Touch 6.0.3.2+ or latest TWRP (if you have a metadata error when flashing, you're using a wrong recovery!)
- Knowledge about Android installation
- A brain
- Hands (Note: a thorough study had shown that no both hands are required for the process)
Downloads
Nightly builds:
http://dl.omnirom.org/i9300
GApps:
Use PA-gapps in the meantime:
http://forum.xda-developers.com/showthread.php?t=2397942
First installation:
- Download gapps and the latest nightly build
- Reboot to recovery
- Flash the nightly build then gapps
- WIPE DATA!!!
- Reboot and enjoy your KitKat
Updates:
OmniROM should pop-up notifications about new nightlies being available.
Changelog:
https://changelog.omnirom.org/#/i9300/next
Known device specific issues:
- Device does not enumerate on USB if booted up while connected to PC.
- Headphones playback path gets nuked if using microphone while listening to music. (Requires reconnecting headset)
- HWC module is a dummy piece of crap, thanks to Samsung openess thing. Needs reimplementation or big batch of fixes.
FAQ:
Q: Why do I get error code 7 when trying to flash ?
A: Because you are using old recovery. Update to the latest TWRP.
Q: Why is there a link for nightlies and for test builds?
A: Test builds got patches cherrypicked in that aren't tested well enough yet to be merged.
Warning 1: Mobile data connection is enabled by default.
Warning 2: Remember to BACKUP your data.
XDA:DevDB Information
OmniROM 4.4 for GT-I9300, ROM for the Samsung Galaxy S III I9300
Contributors
XpLoDWilD, Entropy512, Rebellos
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Version Information
Status: Beta
Created 2013-11-12
Last Updated 2014-08-19
thank you @XpLoDWilD for this feature. :good:
PA gapps of 4.4 I suppose?
Well , beside Camera/video issues there is UI lags/stutters and lack of custumization features.
Its a good start anyway
And btw, no multiwindow
PA Gapps 4.4 ODEX are needed for ART.
@XpLoDWilD : Is root working in ART?
EDIT:
Ok, root is working in ART but I had to flash chainfire root package
Thx XploDWilD for porting and new Thread.....
for me work all fin, but the data is very slow, 20 min for one download from Playstore......
I have low signal and a little ui laggy
Is it possible to install with TWRP?
cant get it to flash. Keep getting the status 7 error. i'm on the right recovery and downloaded the file over 20 times now.
i can't have root, i have to flash old su fix ?
paultje162 said:
cant get it to flash. Keep getting the status 7 error. i'm on the right recovery and downloaded the file over 20 times now.
Click to expand...
Click to collapse
What's the actual error message?
cant get it to flash. Keep getting the status 7 error. i'm on the right recovery and downloaded the file over 20 times now.
Click to expand...
Click to collapse
make sure you are using the latest version of cwm recovery
XpLoDWilD said:
What's the actual error message?
Click to expand...
Click to collapse
It was the same metadata error. I got it fixed now. I flashed CWM 3.0.4.4. Now it works perfectly! Thanks!
Flash cwm-supersu-v0.96 and no root acces . No root problem with other 4.4 maybe tomorrow . Big kif for omni . THX .
I also have low signal :/
These GApps should work: www.mediafire.com/download/a84xzwn0w5lplhz/pa_gapps-modular-full-4.4-20131111-signed.zip
I haven't tested though as I'm about to flash this ROM coming from teksek's CM11 rom (WiFi doesn't work on his rom)
Low signal
Very laggy ui
Camera almost not usable (I think you should really focus 90% of your i9300 work on camera because even if everything else is perfect camera is still a deal breaker for most of the people)
Video playback impossible
Very low customization
Graphics glitch out when using default browser
Laggy 3D games
Im not going to lie to you , im kinda dissapointed , but then again I know its hard to do anything on exynos so thanks for even trying!
Waiting for new builds !
apex launcher works nicely on this build (12112013)
thanx again
d1rekt0r said:
Low signal
Very laggy ui
Camera almost not usable (I think you should really focus 90% of your i9300 work on camera because even if everything else is perfect camera is still a deal breaker for most of the people)
Video playback impossible
Very low customization
Graphics glitch out when using default browser
Laggy 3D games
Im not going to lie to you , im kinda dissapointed , but then again I know its hard to do anything on exynos so thanks for even trying!
Waiting for new builds !
Click to expand...
Click to collapse
Low signal : It's just a display issue
Very laggy UI : Uhm, video needed, because it's smooth as sweet here
Camera not usable is written in the Known issues section...
Video playback, same, written already
Low customization, we just started our alpha, just wait for a few builds
Graphics glitch: Video needed too. Default browser works like a charm here, zero glitch browsing AndroidPolice.com.
Laggy 3D games: Same as above. Video, or list an example game so I can test.
I'm running the same build as you (nightly), and have none of the bug you listed (that weren't known).
The signal is not low. Its a bug with the display of it. Its reading out a wrong value, currently its like 211424242 dBm and not even changing, just a visual bug
edit: lol, posted way too late
CyanogenMod (pronounced /saɪ.'æn.oʊ.dʒɛn.mɒd/) is an enhanced open source firmware distribution for smartphones and tablet computers based on the Android mobile operating system. It offers features and options not found in the official firmware distributed by vendors of these devices.
http://wiki.cyanogenmod.org/w/About
Code:
#include
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Instructions
1. Download the zip(s) - firmware and Google Apps additional package (optional)
2. Download and install a compatible recovery
3. Wipe data, system & cache partitions and flash firmware
4. Optional: install the Google Apps additional package
Known Issues:
- XBMC and some games touch input will fail. A work around would be to purchase a bluetooth keyboard, they are pretty cheap from ebay, or use your existing one to navigate inside XBMC until we solve the problem.
- audio routing does not work when making calls with viber, hangout or skype while connected to bluetooth headset.
- MHL output the colours wrong and audio does not route to tv.
- Google movies will crash if you want to download locally.
- Anything else? you tell me
02/12/2014 stable build
cm-11-20141202-UNOFFICIAL-klimtwifi.zip
- Hulu not working fixed
- google movies not downloading locally fixed
- charging while tablet is off fixed
cm-11-20141202-v2-klimtwifi.zip
fix graphic glitches
added kernel Performance, powersave and userspace governors
All current and previous builds, kernels and fixes can be found HERE
Latest build by senior user miscom:
12/12/2014
https://www.androidfilehost.com/?fid=95854736883843077
upstream cm source update
17/12/2014
https://www.androidfilehost.com/?fid=95857557620393377
upstream cm source update
27/12/2014
https://www.androidfilehost.com/?fid=95864024717070862
upstream cm source update
04/01/2015
cm-11-20150104-UNOFFICIAL-klimtwifi.zip
cm-11-20150104-UNOFFICIAL-klimtwifi.zip.md5sum
corrected true battery values for klimtwifi thanks to github user moneytoo who brought to my attention
update CM source
1/03/2015
cm-11-20150301-UNOFFICIAL-klimtwifi.zip
cm-11-20150301-UNOFFICIAL-klimtwifi.zip.md5sum
Fixed Kodi/xbmc touch issues, and with many games that had no touch register issues.
all credit for the touch issue patch goes to @Patrick Lower
20/05/2015
cm-11-20150520-UNOFFICIAL-klimtwifi.zip
cm-11-20150520-UNOFFICIAL-klimtwifi.zip.md5sum
Google Apps additional package:
http://wiki.cyanogenmod.org/w/Gapps
TWRP:
http://forum.xda-developers.com/gal...recovery-twrp-2-7-1-0-touch-recovery-t2817100
Sources Barracuda:
device tree
kernel for exynos 5420
vendor files
thanks to CyanogenMod team, Google and thanks to:
Nvertigo67 fixing many bugs, eousphoros for starting the intital port to klimtwifi, danny19901, fedecape, rukawa84, kafandi, miscom and anyone else I forgot for testing the rom , crpalmer for his hard work.
Special big thanks to Nvertigo67.
How to build your own
The Guide
1) please visit this thread and follow the instruction to prepare your build environment.
2) once you have CM11 sources downloaded and ready on your build server.
You will need to find your roomservice.xml android/.repo/local_manifests/roomservice.xml and add the following entries:
<project name="barracuda7/android_device_samsung_klimtwifi" path="device/samsung/klimtwifi" remote="github" revision="master" />
<project name="barracuda7/android_kernel_samsung_chagallwifi" path="kernel/samsung/chagallwifi" remote="github" revision="cm-11.0" />
<project name="barracuda7/android_vendor_samsung_klimtwifi" path="vendor/samsung/klimtwifi" remote="github" revision="master" />
click save.
Note: if you fork the repos to your own github account, replace barracuda7 with your own github username.
3) from terminal type the following:
repo sync this should download the blobs, device tree and the kernel.
breakfast klimtwifi will add the rest of the repo's that are needed.
source build/envsetup.sh
brunch klimtwifi
if all above steps were done successfully depending on how fast is your build server you should end up with a zip in about an hour or more.
you can find the zip file here:
android/out/target/product/klimwifi
You are most welcome to post question on this thread regarding building the rom, please only PM me if it is not this rom related, in this way other users can benefit from
the information
Happy Building
reserved
one more
can you make one for t705?
rowihel2012 said:
can you make one for t705?
Click to expand...
Click to collapse
I already tried, not having the tablet makes it extremely hard, until a similar device gets Ported that I can base upon the answer to your question is sadly no.
Sent from my Nexus 5 using Tapatalk
Amazing really great and only 1 issue mic doesn't seem to be picking anything up at all
Barracuda77777 said:
I already tried, not having the tablet makes it extremely hard, until a similar device gets Ported that I can base upon the answer to your question is sadly no.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Have you tried contacting crpalmer??
He is maintaining CM 11 on the tab pro lte version and both devices uses the same qualcomm snapdragon 800.hopefully this can point you in the right direction to get lte working.
also,thanks for the cm lovin on the t705,samdung's lagwizz on this beast's hardware is a complete waste.
and i believe many t705 owners will be willing to trip knox jus to get cm on this baby.
frostmore said:
Have you tried contacting crpalmer??
He is maintaining CM 11 on the tab pro lte version and both devices uses the same qualcomm snapdragon 800.hopefully this can point you in the right direction to get lte working.
also,thanks for the cm lovin on the t705,samdung's lagwizz on this beast's hardware is a complete waste.
and i believe many t705 owners will be willing to trip knox jus to get cm on this baby.
Click to expand...
Click to collapse
My T705 exynos 5 octa not snapdragon
my t705 is exynos 5 octa
rowihel2012 said:
my t705 is exynos 5 octa
Click to expand...
Click to collapse
So snapdragon won't help us as of different radios etc...
danny19901 said:
So snapdragon won't help us as of different radios etc...
Click to expand...
Click to collapse
yea
rowihel2012 said:
yea
Click to expand...
Click to collapse
so back to square one
so the 9500 is the closest to the 705 -805 tablet, but that one is a 3g not LTE
i think if we did not got t705 i will replace it with nexus 9
lagwiz roms make this tab dead
i had the lg pro 2 it was externally fast no lag at all i love snapdragon
my bad abut the cpu,mine is also the exynos octa but the next closest is not the n9500 but the n9005 (Note 3 exynos).
http://www.gsmarena.com/samsung_galaxy_note_3-5665.php
so i guess that where we should look at instead.
i havent been following the note series phone forum after the knox crap samdung tired to ram down consumers throats.but i am sure there are cm roms floating ard.
will keep an eye out on recognised dev to see if anyone can help.
is there a way to look at the lte tw roms for 705 to see if we can get any answers?
For everyone who is gonna try this out I have done some more testing and found a few things that need fixing
In build that's been uploaded
Mono speaker/only 1 speaker works = fixed in next update as I have both working
MIC = not working but also fixed in next update
SD card = won't read or mount but does in recovery
Camera = wrong orientation and looks weird also camera apps I have tested struggle/crash when going to front facing camera
These are what I have found so far
danny19901 said:
For everyone who is gonna try this out I have done some more testing and found a few things that need fixing
In build that's been uploaded
Mono speaker/only 1 speaker works = fixed in next update as I have both working
MIC = not working but also fixed in next update
SD card = won't read or mount but does in recovery
Camera = wrong orientation and looks weird also camera apps I have tested struggle/crash when going to front facing camera
These are what I have found so far
Click to expand...
Click to collapse
Can confirm this.
On the software side:
- battery stats is finally working
- on a dirty flash the unlockers from various programs are corrupted
- trebuchet still crashes on boot
- people apps works
- synapse doesn't work anymore (UCI not supported)
Going to report back on the battery, previous version of cm11 (other thread) had serious battery drain problems
But definitely a step up, keep up the great work!!
thomas_pieps said:
Can confirm this.
On the software side:
- battery stats is finally working
- on a dirty flash the unlockers from various programs are corrupted
- trebuchet still crashes on boot
- people apps works
- synapse doesn't work anymore (UCI not supported)
Going to report back on the battery, previous version of cm11 (other thread) had serious battery drain problems
But definitely a step up, keep up the great work!!
Click to expand...
Click to collapse
Just finished building a new build:
External sd fixed
microphone fixed
mono speaker issue
just waiting for danny19901 to test it out and I will post the link, or if there is anyone willing to test pm me.
happy to see people working on the T700 again will be giving it a try soon. I'm also a bit tired of TouchWiz
OP updated with new build:
cm-11-20141116-UNOFFICIAL-klimtwifi.zip
fixed:
external sd
stereo sound
microphone
still to be fixed camera preview is a bit skewed .
A big thank you do danny19901 for doing the testing. :good:
Great, feedback on the battery is as followed:
50% battery drain on 2h 26min, problem still there. For the moment I use the skyhigh cm 1.4 kernel
Which kernel do you guys use? And is the battery any better?