Unrooted s3 with no rom installed help? - Galaxy S III General

so i had a rooted s3 which is now my old phone and wanted to return it to stock for sale.
i start by unrooting the phone (now realise this should of been done last)
i then tried to flash the stock firmware on with odin however keep getting stuck at NAND write start (i have tried using different PIT files and kies is all closed down)
i can get to recovery and download mode but nothing else. cant install any roms from recovery.
is there a way i can root the phone again to get a rom on it? its not found by the pc when trying to use s3 toolkit or abd devices
Thanks

viper1402 said:
so i had a rooted s3 which is now my old phone and wanted to return it to stock for sale.
i start by unrooting the phone (now realise this should of been done last)
i then tried to flash the stock firmware on with odin however keep getting stuck at NAND write start (i have tried using different PIT files and kies is all closed down)
i can get to recovery and download mode but nothing else. cant install any roms from recovery.
is there a way i can root the phone again to get a rom on it? its not found by the pc when trying to use s3 toolkit or abd devices
Thanks
Click to expand...
Click to collapse
You are posting in the wrong forum see sticky top of the page .
Problem reads as you need a new motherboard or you can read multiple identical posts re NAND.

doesnt matter fixed it now anyway, just used the kies recovery
Thanks anyway

1 wrong section
2 u dont need root to install any roms.
3 He dont need new motherboard. Wth r u talking about?
Just use usb from backside of ur pc. NO from keyboard or hub, frontside. Just backside usb port and flash any rom u want.

maqikpl said:
1 wrong section
2 u dont need root to install any roms.
3 He dont need new motherboard. Wth r u talking about?
Just use usb from backside of ur pc. NO from keyboard or hub, frontside. Just backside usb port and flash any rom u want.
Click to expand...
Click to collapse
U nid root to flash roms
Sent from my GT-I9300.
Give a thank if i helped you

I had the same problem on trying to 100% clean my phone since its freeze on locking unlocking and I turn it on it reboots like 10 times and then I just bought an external card with a USB thing to put it inside and conect it to my PC which allowed me to get cmw/rom/ etc and re do it all again.

JJEgan said:
You are posting in the wrong forum see sticky top of the page .
Problem reads as you need a new motherboard or you can read multiple identical posts re NAND.
Click to expand...
Click to collapse
New motherboard? And you wonder why I dismissed advice from you calling you intolerant when you give wrong, lazy and bad advice like that.

Related

may have bricked?

Hey guys,
My buddy had CM7 on his vibrant, phone was ****ing up so we wanted to send it back, so i ODIN the stock 2.2 just the one on the sticky...had the pda section. Flashed it everything said it passed, but phone won't turn on at all? Anybody know what to do?
kkoshko1 said:
Hey guys,
My buddy had CM7 on his vibrant, phone was f***ing up so we wanted to send it back, so i ODIN the stock 2.2 just the one on the sticky...had the pda section. Flashed it everything said it passed, but phone won't turn on at all? Anybody know what to do?
Click to expand...
Click to collapse
The only thing I can think of is that he had had a Gingerbread bootloader on his phone... I'm not experienced with this as I've never flashed a gingerbread bootloader... The only thing I can suggest you try is to:
~~~​Make sure you have ODIN OPEN with admin privileges!
1.) Take off your back cover, remove your sim & mirco sd card.
2.) Remove your battery.
Make sure you have the USB plugged into your PC but NOT your phone!
3.) Hold the volume buttons.
4.) Put the battery in.
5.) Put the USB in.
You don't necessarily need the download mode image to be present. As long as you are getting the COM ID to light up yellow in ODIN, just flash back to stock like normal.
~~~​
Also, I would suggest you post this again in the Q&A section of this forum or ask a moderator to move this thread it for you. You will get a lot more answers in that section.
thanks, yeah that didn't work it's dead, he must of had teh GB bootloaders...
can you move this in the proper section please
Were you able to put it into download mode?
What firmware did you flash exactly?
How did you setup odin before you clicked start?
Post filenames, give details.
Ive got the "skorpn jig, but have never used it in a blackscreened hard brick, Never really heard if it worked on one, Be curious if anyone has.

Bricked Your Phone, Post Here !

This Thread Is For Them Who Bricked There Phones​
Don't start a new thread for your bricked phone & post here.
We will help you with every possible solutions.
​
Here are some quick tips :
(Here I'll use the terms like Download-Mode & Recovery-Mode, If you dont know what are they please click here. There "BOOT to RECOVERY" & "BOOT to BOOTLOADER" means how to enter into Recovery-Mode & Download-Mode respectively.)
A Bricked Phone May Have One or More (Below Problems) :
1. Booting to the ROM(Android) not possible.
2. Booting to the Recovery-Mode not possible.
3. Black screen or Bootloop(Repeated Restarting of Phone at Boot Animation or Samsung Galaxy Y Logo).
Possible Solutions :
(Remember there'll be data loss using these solutions so always try to keep a backup)
1. If you can still enter into Recovery-Mode
(a). Try to clear Data & Cache then check.
(b). Try Installing a Custom ROM using CWM(ClockWorkMod Recovery) & check.
(For Custom ROM & CWM Visit here.)
2. If Recovery-Mode didn't helped Enter into Download-Mode & flash an odin supported stock rom(using ODIN 1.84 or 1.85) from Doky73's Thread(Flashing Guide in 2nd post).
*You can inform me, if anything left out.
Note :
1. I'll be not held responsible for anything that happens to your phone.
2. Before posting try to search for similar type problems out there & try the solution, if that doesn't solve your problem then post here.
Make this a sticky.. there are many users who say that their phone is bricked
help! bricked SGY
galaxy y bricked
i bricked my sgy last 3 weeks.
here's what i did.
-installed creedsix rom.
-installed UOT kitchen Themes.
-wipe data
problem
-stuck in bootlogo
-softbricked.
-cant go to recovery mode
-flashed too many times, still stuck in bootloop
i flashed at least 20 times, with different firmwares.
but still no luck, still boot lop.
my professor said something about secondary bootloader that might help. but i had definitely no idea what it is.
i asked some techies on the mall, and they said that this phone must undergo the JTAG process. but it cost $20.
help me. thanks.
jmpotter said:
galaxy y bricked
i bricked my sgy last 3 weeks.
here's what i did.
-installed creedsix rom.
-installed UOT kitchen Themes.
-wipe data
problem
-stuck in bootlogo
-softbricked.
-cant go to recovery mode
-flashed too many times, still stuck in bootloop
i flashed at least 20 times, with different firmwares.
but still no luck, still boot lop.
my professor said something about secondary bootloader that might help. but i had definitely no idea what it is.
i asked some techies on the mall, and they said that this phone must undergo the JTAG process. but it cost $20.
help me. thanks.
Click to expand...
Click to collapse
can you go to download mode??
(try pressing volume down+ home button + power button all at the same time)
if it still can, then your SGY is still good
go to this ---> thread
and just flash your country's firmware
From where you got the firmwares.... How you flashed...
Ever tried re partitioning.... Ever flashed boot loader....
For info... Jtag or boundary-scan is used for testing & servicing high technology electronic boards...
Sent from my GT-S5360 using Tapatalk 2
Millan.SIS said:
From where you got the firmwares.... How you flashed...
Ever tried re partitioning.... Ever flashed boot loader....
For info... Jtag or boundary-scan is used for testing & servicing high technology electronic boards...
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
just for info, jtag will not fix the problem. IT IS SCANNING.. like trouble shooting.
that only means that those technicians are pretending to be well educated but the truth is that they only wanted to get some cash out of your pocket.
static28 said:
just for info, jtag will not fix the problem. IT IS SCANNING.. like trouble shooting.
that only means that those technicians are pretending to be well educated but the truth is that they only wanted to get some cash out of your pocket.
Click to expand...
Click to collapse
ya, that's what those wannabees really do..
Sent from my GT-S5360 using Tapatalk 2
this one will a little bit off topic...what is creedsix?is it a rom for SGY?
if the phone still can boot that means everything is fine. pull out the battery, wait 10 seconds, reinsert the battery, do three magic combo button, you'll enter recovery mode. don't worry about our bootloader. our bootloader is stored in different partition thus installing any custom rom won't affect our bootloader. as far as i know, there is only one person who have messed up with bootloader and got an ultimate hard brick.
kurotsugi said:
this one will a little bit off topic...what is creedsix?is it a rom for SGY?
if the phone still can boot that means everything is fine. pull out the battery, wait 10 seconds, reinsert the battery, do three magic combo button, you'll enter recovery mode. don't worry about our bootloader. our bootloader is stored in different partition thus installing any custom rom won't affect our bootloader. as far as i know, there is only one person who have messed up with bootloader and got an ultimate hard brick.
Click to expand...
Click to collapse
Really its great thread ........ Many many thanks for helping ppl ......
is it possible repair hard brick ..... what is hard brick... if device hard brick device gos life time dead ??
Sent from my GT-S6102 using xda premium
a hard brick is when our device doesn't respond to power button.
the guy that I've mentioned above is doky73. he accidentally flash a bootloader for sgs2 into his sgy. last time he said that he send his sgy to samsung service center and buy a new one. I'm not sure if samsung has revived his sgy.
edit: I didn't to offend him but I think I've mispelled doky's username. edited.
manoranjan2050 said:
Really its great thread ........ Many many thanks for helping ppl ......
is it possible repair hard brick ..... what is hard brick... if device hard brick device gos life time dead ??
Sent from my GT-S6102 using xda premium
Click to expand...
Click to collapse
whatever It may be... You should never mess up with bootloaders, if you don't actually know what's there significance...
Brief description on android starting process :
pbl(primary boot loader "boot.bin") executes first and then it executes sbl ...
Sbl(secondary boot loader "sbl.bin") is responsible for responding to combos...download mode.. Intercepting odin commands..... booting system...booting kernel.... Charging your battery while switch off... Etc etc
Harm anyone of them... And Your phone goes into lifetime hibernation, Hard-bricked.
Sent from my GT-S5360 using Tapatalk 2
thanks for the big info friend...... so hard bricl is mot repairble ......
Sent from my GT-S6102 using xda premium
my device might be bricked, can you please help me out
Hi to all, it's only my second post but i have a major problem with my samsung s-5360. it's won't boot anymore, but it can enter cmw and recovery. This is what i did wrong i believe. At first i installed morocs 1.8 kernel on creed fusion version 3.1 and it wouldn't boot anymore, so i ended up using a back-up i made before with cmw. And it worked well and phone was booting again and was on stock again. ( because back-up was made with stock-version obviously )
Then i thought: well let's try repensis noob version. And installed it and there was also an update 2 and installed it over it as well before booting the os, maybe this is what i did wrong dunno .. But afterwards it didn't boot anymore and whatever i tried, restoring one of the 3 images i made, or using one of the roms posted here like Creed fusion 3.1 rom or Aurora 2 nor Chobits didn't work.
I also tried reverting to stock with odin 1.85 but when i connected my phone via usb to the pc, odin didn't see my phone. ( after selecting the 3 tar files in odin ) Maybe i'm doing wrong something there.
What i also have to add is that when doing factory wipe in recovery it says formatted E: but unable to format E:\dev10 and dev11. clearing cache is no problem and also cleared dalvik cache. Can you please help me out ? I know, it sounds very noobish but well, i have to face it because can't do it myself without help anymore it seems ... Thanx a lot in advance.
please make sure that you've installed the driver and plug the usb to computer only on download mode when flash with odin. dev10 and dev11 are the partition for data and cache. that error means something was wrong with your recovery mode. you'll need to install a fresh stock rom with odin.
kurotsugi said:
please make sure that you've installed the driver and plug the usb to computer only on download mode when flash with odin. dev10 and dev11 are the partition for data and cache. that error means something was wrong with your recovery mode. you'll need to install a fresh stock rom with odin.
Click to expand...
Click to collapse
Thanx a lot for responding ! I only used kies for connecting my phone because i couldn't find a driver for it, and had to disconnect it, but i will search for it again now and hopefully it will work now. i have to go now and return back in three hours. i'm very curious ! i'll come back in a couple of hours and gonna tell if it worked out of course
kurotsugi said:
a hard brick is when our device doesn't respond to power button.
the guy that I've mentioned above is doky77. he accidentally flash a bootloader for sgs2 into his sgy. last time he said that he send his sgy to samsung service center and buy a new one. I'm not sure if samsung has revived his sgy.
Click to expand...
Click to collapse
to be precise: the guy was Doky73...
I was playing with different revisions of SBLs because on SGS2 some old SBL gives the possibility to reset custom bin counter via JIG. At a given point accidentally browsed SGS2 bootloader instead of SGY one...
But I did perfect job, the service center wasn't able to detect the cause of bricking, but they recovered my phone under warranty. (I think they're not reading this forum )
Doky73 said:
to be precise: the guy was Doky73...
I was playing with different revisions of SBLs because on SGS2 some old SBL gives the possibility to reset custom bin counter via JIG. At a given point accidentally browsed SGS2 bootloader instead of SGY one...
But I did perfect job, the service center wasn't able to detect the cause of bricking, but they recovered my phone under warranty. (I think they're not reading this forum )
Click to expand...
Click to collapse
Thanks friend.............
if i install some custom rom custom kernel via odin or CWN its gos to hard brick ???
in odin re-partition option for why ............ its disbl by default if i enable it wats problem........
dear friend if u have any odin full tutorial /guide /ref please provide me for learn syep by step one by one option or problem......
ops...my mistake. I guess I'm too sleepy when was typing your name. I'll edit it. sorry.
manoranjan2050 said:
Thanks friend.............
if i install some custom rom custom kernel via odin or CWN its gos to hard brick ???
in odin re-partition option for why ............ its disbl by default if i enable it wats problem........
dear friend if u have any odin full tutorial /guide /ref please provide me for learn syep by step one by one option or problem......
Click to expand...
Click to collapse
if u flash something through odin or cwm then you wouldnt hard brick ur phone.. it would be just a temporary brick which can be easily revived... i dont know abt that partioning thing
Sent from my GT-S5360 using XDA
kurotsugi said:
please make sure that you've installed the driver and plug the usb to computer only on download mode when flash with odin. dev10 and dev11 are the partition for data and cache. that error means something was wrong with your recovery mode. you'll need to install a fresh stock rom with odin.
Click to expand...
Click to collapse
Hi, there i am and sry for disturbing you again or someone else but i managed to install a non kies usb driver and i'm flashing thru odin 1.85 right now but i'm stuck at BcmCP.img for over an hour . Is it because i forgot to remove the sd card ? I only removed the sim and is it safe to stop the process and start over again or should i wait ?
---------- Post added at 02:35 AM ---------- Previous post was at 01:47 AM ----------
mickeyindahouse said:
Hi, there i am and sry for disturbing you again or someone else but i managed to install a non kies usb driver and i'm flashing thru odin 1.85 right now but i'm stuck at BcmCP.img for over an hour . Is it because i forgot to remove the sd card ? I only removed the sim and is it safe to stop the process and start over again or should i wait ?
Click to expand...
Click to collapse
Well after trying this proces for the 5th time i finally managed to go to stock rom and it only lasted a couple of minutes Of course thanx to doky73 who made all this possible ! So i unbricked it for the second time i guess

Just bricked My shiny new S4 and im going on holiday tomorrow!Help me please !

I tried to install CWM earlier today and its gone wrong and now i get the dreaded error message
Firmware upgrade encountered an issue etc
Kies wont recover it either.
Now im hoping i can get it going again quickly
Just from skimming through here while trying to pack i gather i need to use odin to reflash the stock firmware.
I wouldnt normally ask but could some nice person spoon feed me given the circumstances of time constraints
Gavin01 said:
I tried to install CWM earlier today and its gone wrong and now i get the dreaded error message
Firmware upgrade encountered an issue etc
Kies wont recover it either.
Now im hoping i can get it going again quickly
Just from skimming through here while trying to pack i gather i need to use odin to reflash the stock firmware.
I wouldnt normally ask but could some nice person spoon feed me given the circumstances of time constraints
Click to expand...
Click to collapse
All you need to do is search google. No one spoon feeds you in real life so no one shouldn't spoon feed you here also.
http://forum.xda-developers.com/showthread.php?t=2261573
You need to follow these instructions but you need to download your correct firmware.
Sent from my SAMSUNG-SGH-I337
Use Odin to flash stock firmware by following this guide, I assume that you have the i9505, if so then flash this CWM,
thanks i need to find the right rom now
thanks fingers crossed
EDIT
im guessing this is the right rom
I9505XXUBMEA_I9505OXXBMF1_XEF.zip
thanks guys weve done it!
its resurrected!
cheers
I stuffed my phone up again and thought id post here instead of making a new thread.
flashed the latest modem which in turn has for some reason fubored all my dialling out and messages etc so i cant use the phone for anything other than browsing .....
I9505XXUBMEA_I9505OXXBMF1_XEF.zip<<<<<<<<<<<<this is what i used last time and it didnt work this time
so ive now tryed this one I9505XXUFNB8_I9505BTUFNB3_I9505XXUFNB8_HOME.tar.md5
my phone is a sim free s4.
the second one appears to work but wont get passed the lock screen with out continuous errors. (i note i now have the knox label in the bootloader)
How do i find the latest stock rom for my phone? so i can start again?
thanks
I had exact same issue so i falshed XXUFNB9 from sammobile and now im rooted runnin cm11 m9 .
Do suggest UNISTALLING samsung usb drives from pc and reinstalling fresh new ones for your device snd then flashing. I flashed 4 different firmwares. It was only until i reinstalled s4 usb drives my phone becsme alive. Dunno how but i reckon usb drives is the issue

Please !urgent help mobile system deleted!!:( pls

I AM A NOOB IN THIS STUFF . DONT KNOW ANYTHING ELSE EXCEPT ONLY ROOTING.
Im Done .. my Life Ends...
I had A Samsung Galaxy S4 ,
Samsung Galaxy s4
Model = GT-19500
4.3
badband = I9500XXUEMJ8
Kernel ,
3.4.5-1938685
Oct 21 Monday 2013
Build Number
JSS15J.I9500XXUEMJ8
SELINUX STATUs
Enforcing
SEPF_GT-I9500_4.3_0024
It was rooted. recently I tried Adding A ROM for the first time .. Using CWM .. I Followed the steps Mentioned On A Perticular Website ... I dont know whether i can share links here or something....But I guess It Wont help.. Unless I post the link.. Or wait Let me Copy the Rom file mentioned Their To Download and yea I Tried to Update my Andriod 4.3 With Kitkat. . .Rom Of S5. [ Or thats What i wanted to do ]
Rom Link
"CANT ADD URL"
I used Recovery Of Clockward Mod.
Added that Exe File in My Phone. Use Recovery mod [Home+vol up + Lock ] Went their
First noidbackuped and then added Custom Rom. Now Everything was done . I Reeboted . My devide got Bootlooped.. And The Things Went worse when I tried to Finish The bootloop [Stuck at Samsung] by
Perform a full clean-up of the device (This will delete all apps and their settings and game progress). For this:
Select Wipe data/Factory reset, then select Yes on the next screen to confirm factory reset (screenshot).
Select Wipe Cache Partition, then select Yes on the next screen to confirm wiping cache.
it Didnt work .. So I Tried to Restore my Rom .. .Just Went In Back up restore and selected the backed up .rom and Stilll device Softbricked.
Then What i did was Completly ****. I just Was In like Blank Mind . So I FORMATTED MY WHOLE PHONE INCLUDING SYSTEM AND SDCARD0 .. And there , Now I have Nothing but just A CWN RECOVERY MOD ACCES+ ODIN DOESENT RECOGANIZE MY DEVICE IN DOWNLOADING MOD OR ANY .. And when i Try To turn on It just Do Nothing .. And after giving First Samsung GT-I9500 Screen it Just Goes black.. Obv without any System.. So the Problem here is ..
I tried To download my Firmware and Added it in ext Card. And Tried to Install it using Cwm but it was a Odin File..
Please help me How to Restore My Rom .. Or just tell me where to download a suitible custom rom for my Phone .. ? What Number [Model] to check...
All i can Access is to add a Rom in My Sd card and Use Cwm To Install it ..Please Help me . I will really Appreciate it . PLEASE. My Phone.....
I know xda developers Can only Help me .. This Is my last resort...
I KNOW I SUCK IM A NOOB I SHOULDNT TRY THIS STUFF .. But Now i did it. .
If it is still under warranty go to a Samsung service center and act dumb. Tell them something like "I was listening to music and it did that"
Its your last resort
michaels4 said:
If it is still under warranty go to a Samsung service center and act dumb. Tell them something like "I was listening to music and it did that"
Its your last resort
Click to expand...
Click to collapse
isnt There a way ? To Just Install Rom ? I can still acess CWM And If Someone Can tell me A Appropriate Rom File .zip for my Cellphone Ill download it , Add it in Sd card and Then Use CWM To Install that rom ? Its quite Possible ? Please ? Anyone ? help ?
you can't use download mode but you can still enter recovery? that's pretty weird... are you sure you're trying correctly? are the drivers properly installed and stuff? if it still doesn't work, then go to this section of the forum: http://forum.xda-developers.com/galaxy-s4/i9500-develop there you will find plenty of roms you can flash with CWM recovery
-Ric- said:
you can't use download mode but you can still enter recovery? that's pretty weird... are you sure you're trying correctly? are the drivers properly installed and stuff? if it still doesn't work, then go to this section of the forum: http://forum.xda-developers.com/galaxy-s4/i9500-develop there you will find plenty of roms you can flash with CWM recovery
Click to expand...
Click to collapse
I can enter Downloading Mod but The Problem is That There is No /0/System .. In my Mobile . So Computer Dosent Pics up .. I Deleted my sdcard/0/ .. Completely Using CWM so i can only access CWM ..
Hamza09 said:
I can enter Downloading Mod but The Problem is That There is No /0/System .. In my Mobile . So Computer Dosent Pics up .. I Deleted my sdcard/0/ .. Completely Using CWM so i can only access CWM ..
Click to expand...
Click to collapse
Hi mate,
Lets go step by step.....
If you can get into recovery you can get into download...
1. Press and hold Volume Down, Home and Power buttons at the same time.
2. Release the buttons when you get the warning message.
3. Now press Volume Up button to confirm.
after you are in download mode lets flash a stock rom back in you can follow this thread
http://forum.xda-developers.com/showthread.php?t=2265477
or go to sammobile and get the latest one from your country
http://www.sammobile.com/firmwares/
same one you had or newer ,
Another option would be ....
Take external sd out of your phone and use any posible adapter or device so you can use you pc to place a custom rom in....now place it back in your phone and from cwm instal the custom rom...
Stop panicing. This is basic rom flashing.
Just flash a custom rom from within cwm.
michaels4 said:
If it is still under warranty go to a Samsung service center and act dumb. Tell them something like "I was listening to music and it did that"
Its your last resort
Click to expand...
Click to collapse
I can see that you are a new member, but why would you even give him this advice? There is nothing wrong with his phone. Stop giving these advices because it only scares people.
Lennyz1988 said:
Stop panicing. This is basic rom flashing.
Just flash a custom rom from within cwm.
I can see that you are a new member, but why would you even give him this advice? There is nothing wrong with his phone. Stop giving these advices because it only scares people.
Click to expand...
Click to collapse
Allright my Phone Is Back .. But its only Lock Screen that works when i unlock it hangs and gives S voice Stopped working , xxxx stopped working this stopped working etc... ? Now how should i fix this problem ? please Im really thankfull For all of your advise.. i downloaded the Official Firmware From Sam Firmwares and used Odin and Did Intall everything. please ? Tell me what should i do ? now ..
Lennyz1988 said:
Stop panicing. This is basic rom flashing.
Just flash a custom rom from within cwm.
I can see that you are a new member, but why would you even give him this advice? There is nothing wrong with his phone. Stop giving these advices because it only scares people.
Click to expand...
Click to collapse
It is better to go to Samsung he might get a new s4

To mighty developers: Can ROM cause problems or damage USB connectivity?

Can ROM somehow cause problems with USB recognising of my SGS4 I9505 ?
Charging is fine, but can't be recognized by PC.
Shall i try this damaged SGS4 with other ROMs flashing with custom recovery and SD card, or it can only be hardware problem, so no need to try other ROMS ?
My question is simple and i need simple answer (like yes or no). I won't explain how many threads i've checked- simply i'll tell what i've tried.
1. Dozens of cables
2. Few different laptops with different OS
3. A lot USB ports
4. Cleaning phone USB port
5. Replacing with another 2 USB boards from other SGS4
6. Hard phone cache and factory reset
7. Delete all drivers, reinstall em, also KIES, Error code i receive in device manager is 43. Tried to force Samsung drivers for this device, it accept them, but gives error code 10 - device can not start.
Phone can't be recognized in all modes. Last time it was connecting properly was when i flashed last ROM with Odin. It is STOCK rom. - I9505XXUHOB7_I9505YBTHOB7_DBT-Stock ROM Galaxy s4 and it has received several updates OTA from Samsung.
I have 2 more SGS4 which connects and works fine with all cables. They have never been flashed or rooted.
Shall i try this damaged SGS4 with other ROMs flashing with custom recovery and SD card, or it can only be hardware problem, so no need to try other ROMS ?
THANKS a lot in advance !!!
grosseader said:
Can ROM somehow cause problems with USB recognising of my SGS4 I9505 ?
Charging is fine, but can't be recognized by PC.
Shall i try this damaged SGS4 with other ROMs flashing with custom recovery and SD card, or it can only be hardware problem, so no need to try other ROMS ?
My question is simple and i need simple answer (like yes or no). I won't explain how many threads i've checked- simply i'll tell what i've tried.
1. Dozens of cables
2. Few different laptops with different OS
3. A lot USB ports
4. Cleaning phone USB port
5. Replacing with another 2 USB boards from other SGS4
6. Hard phone cache and factory reset
7. Delete all drivers, reinstall em, also KIES, Error code i receive in device manager is 43. Tried to force Samsung drivers for this device, it accept them, but gives error code 10 - device can not start.
Phone can't be recognized in all modes. Last time it was connecting properly was when i flashed last ROM with Odin. It is STOCK rom. - I9505XXUHOB7_I9505YBTHOB7_DBT-Stock ROM Galaxy s4 and it has received several updates OTA from Samsung.
I have 2 more SGS4 which connects and works fine with all cables. They have never been flashed or rooted.
Shall i try this damaged SGS4 with other ROMs flashing with custom recovery and SD card, or it can only be hardware problem, so no need to try other ROMS ?
THANKS a lot in advance !!!
Click to expand...
Click to collapse
Does it get detected when you are booted into download mode?
Lennyz1988 said:
Does it get detected when you are booted into download mode?
Click to expand...
Click to collapse
Yes it is detected, BUT not recognized. Odin can't see it.
grosseader said:
Yes it is detected, BUT not recognized. Odin can't see it.
Click to expand...
Click to collapse
What does Windows see? What is the name that the device that is being detected?
Lennyz1988 said:
What does Windows see? What is the name that the device that is being detected?
Click to expand...
Click to collapse
Unknown device in Universal Serial Bus controllers
Windows has stopped this device because it has reported problems. (Code 43)
You need drivers I've ran into this multiple times. What OS are you running on your computer?
agraceful said:
You need drivers I've ran into this multiple times. What OS are you running on your computer?
Click to expand...
Click to collapse
PLS ! Read 1st post !
Just need to know has ROM anything to do with USB connectivity?
So should i bang my head and search for flashing without custom recovery, root and USB connectivity !? Is there any chances to flash that way another rom, an will it fix usb connectivity ?
If ROM has NOTHING to do with usb connectivity- then i'll just leave it that way! It is simple ! But no simple answer yet
grosseader said:
PLS ! Read 1st post !
Just need to know has ROM anything to do with USB connectivity?
So should i bang my head and search for flashing without custom recovery, root and USB connectivity !? Is there any chances to flash that way another rom, an will it fix usb connectivity ?
If ROM has NOTHING to do with usb connectivity- then i'll just leave it that way! It is simple ! But no simple answer yet
Click to expand...
Click to collapse
Download mode is separated from the rom. So no, the rom has nothing to do with usb connectivity while in download mode. Another rom will not fix your problems.
grosseader said:
PLS ! Read 1st post !
Just need to know has ROM anything to do with USB connectivity?
So should i bang my head and search for flashing without custom recovery, root and USB connectivity !? Is there any chances to flash that way another rom, an will it fix usb connectivity ?
If ROM has NOTHING to do with usb connectivity- then i'll just leave it that way! It is simple ! But no simple answer yet
Click to expand...
Click to collapse
I told you how to fix your problem. And nor I'll kindly tell you to piss off. I'm sick of ignorant people asking dumb questions. Use Google or gtfo.
Lennyz1988 said:
Download mode is separated from the rom. So no, the rom has nothing to do with usb connectivity while in download mode. Another rom will not fix your problems.
Click to expand...
Click to collapse
There must be button Thanks ! 10x
agraceful said:
I told you how to fix your problem. And nor I'll kindly tell you to piss off. I'm sick of ignorant people asking dumb questions. Use Google or gtfo.
Click to expand...
Click to collapse
Dude, i don't want to be irrogant or such ! sorry for my bad english or if it looks like i'm bad person!
But simply- i've explained that i have 3 abolutely equal phones GT i9505 and other 2 has connectivity and it is all fine with them, also it is written that i have wiped all drivers and reinstall em several times.
Do you think that there are special drivers for third Galaxy s4 ?
pls, don't be rude, and if we was trusting on everything in google....wtf we are doing here ?
agraceful said:
I told you how to fix your problem. And nor I'll kindly tell you to piss off. I'm sick of ignorant people asking dumb questions. Use Google or gtfo.
Click to expand...
Click to collapse
Dude, i don't want to be irrogant or such ! sorry for my bad english or if it looks like i'm bad person!
You didn't told me anything that i haven't tried !!!!
But simply- i've explained that i have 3 abolutely equal phones GT i9505 and other 2 has connectivity and it is all fine with them, also it is written that i have wiped all drivers and reinstall em several times.
Do you think that there are special drivers for third Galaxy s4 ?
pls, don't be rude, and if we was trusting on everything in google....wtf we are doing here ?
Lennyz1988 said:
Download mode is separated from the rom. So no, the rom has nothing to do with usb connectivity while in download mode. Another rom will not fix your problems.
Click to expand...
Click to collapse
There must be button "Thanks 10x"
P.s: I'm sorry for that posts! Though i can delete my previous replies !

Categories

Resources