Problem with phone calls and volume after playing with KitKat ROMs - Galaxy S 4 Q&A, Help & Troubleshooting

So yesterday I was attempting to play with some ROMs on my phone, and tried a couple of the Google Edition KitKat ROMs. The install process went normally, but after bootup, both ROMs I tried were giving an error repeatedly for com.android.phone after the phone booted up. So I OK'd through the error messages whenever it would pop up, and eventually force closed through app manager, and put the phone into airplane mode so it would stop popping up so I could check out the ROM. Volume was working at the time because I remember notification sounds while I was messing around. Once I had my fun, I went back into CWM, wiped, and restored to my normal ROM which is PAC Man 4.2.2. Restore process seemed to go fine.
Now this morning I attempted to turn on Pandora as I was getting ready for work, and it kept auto forwarding through each song and was acting weird. So I tried Google Play Music, and it force closed and gave a DSP Manager not responding error. So I tried Apollo, and same thing happened. Rebooted a few times, tried to reinstall DSP, Music, and Apollo, and the same thing was happening. I also noticed I had no notification sounds and if I try to change my sounds, I cant hear the preview. Finally, if I try to make a call by clicking on the Phone icon, I can see my call history, contacts, etc, but if I try to call out, the screen goes black. The call does go through though, but there is nothing on the screen and I cant hear anything.
So I went back to an even older restore I had saved, and even a STOCK GS4 rooted restore I had, and the problems persisted. So for the hell of it, I tried to restore back to stock unrooted image but then I remembered I couldnt because of Knox, and the phone got stuck in download mode while trying to ODIN. Eventually I was able to get back to my latest restore of PAC Man but the problems persist.
What could the issue be? Its happening no matter what ROM Im using. But I do not think its a hardware problem or I likely wouldnt have all the quirky things happening on the phone apps (I dont think?). Is there something in the firmware or bootloader that would make the volume/phone functions not work? When it got stuck in ODIN download mode could that have screwed something up? Any help is apprecated.

I dunno if u void ur warranty but i think yes, but this isnt important now (take a look in your download mode knox 0x0 (ok) or knox 0x1(void). I think the best u can do:
- Download one ROM (flashable in RECOVERY) that no **** ur warranty if ur KNOX still 0x0 (in the case KNOX is 0x1, download any good rom for your device)
- Copy it to your External SD card
- Go to CUSTOM RECOVERY
- Wipe all
- Install the .zip file
- Enjoy!

I already know the warranty is voided and I'm not concerned with the Knox stuff, I've already been through all that. I accidentally upgraded to 4.3 bootloader in the past but thankfully had a custom recovery already installed so I'm OK with that. I'm just trying to figure out what may have caused the volume and app issues and how to resolve.

Any other ideas? I'd really like to avoid getting a new phone that might have Knox installed out of the box and be stuck with a stock phone.

Just realized it will not play youtube app and Chrome browser videos either, just crashes, and the handsfree camera feature screws up taking pictures so I have to disable that feature. Something isnt right.

Related

[Q] Major issue with Australian SM-9005, help!

Hey guys, so I've had my Aussie Telstra Note 3 (SM-9005) for just under a month, rooted it with Knox 0x1, installed TWRP 2.6.3.5 and have tried out a few custom ROMs - all went fine. (Last ROM that worked properly was Foxhound 1.0.)
That is until I flashed X-Note Transformer Edition (MJ7). I flashed this through TWRP 2.6.3.5, everything was successful and standard as any other flash, rebooted into the ROM only to find a message saying "Can't play this video" on the very first Interactive Tutorial (Language Select) page. This message appeared multiple times, then more messages saying the system has crashed. Also, everything is extremely slow and barely anything works - including sound, camera, settings, etc. Also Wifi detects networks but cannot connect to them (system crashes). Any time I try to do anything settings related the system bootloops, and I cannot get a mobile signal at all.
Now here's the weird thing, I thought it was just an issue with the ROM not being compatible, so I rebooted to recovery, tried to reflash the previously-working Foxhound 1.0 ROM - SAME ERRORS. Tried a full wipe/format/rm -rf - and install stock ROM from zip - SAME ERRORS. Downloaded the completely stock Telstra Odin ROM, flashed through Odin successfully - SAME ERRORS. Tried to restore EFS (It said successful) - SAME ERRORS... hope you can see where I'm going with this. I've also tried CWM, flashing with different versions of TWRP, full wipe before installing any ROM, etc. tried basically anything I could find on xda without any luck - the ROMs all boot up, but as soon as they load it pops up with the same "Can't play this video" message and everything starts locking up.
This has me really worried since I tripped Knox at the very beginning before Root de la vega, I'm only hoping whoever Telstra use to fix these doesn't care about the counter.
I have literally spent two days without sleep trying everything to fix this and completely failing, so If anyone could help me out I would be forever in your debt, cheers.
zuuus said:
Hey guys, so I've had my Aussie Telstra Note 3 (SM-9005) for just under a month, rooted it with Knox 0x1, installed TWRP 2.6.3.5 and have tried out a few custom ROMs - all went fine. (Last ROM that worked properly was Foxhound 1.0.)
That is until I flashed X-Note Transformer Edition (MJ7). I flashed this through TWRP 2.6.3.5, everything was successful and standard as any other flash, rebooted into the ROM only to find a message saying "Can't play this video" on the very first Interactive Tutorial (Language Select) page. This message appeared multiple times, then more messages saying the system has crashed. Also, everything is extremely slow and barely anything works - including sound, camera, settings, etc. Also Wifi detects networks but cannot connect to them (system crashes). Any time I try to do anything settings related the system bootloops, and I cannot get a mobile signal at all.
Now here's the weird thing, I thought it was just an issue with the ROM not being compatible, so I rebooted to recovery, tried to reflash the previously-working Foxhound 1.0 ROM - SAME ERRORS. Tried a full wipe/format/rm -rf - and install stock ROM from zip - SAME ERRORS. Downloaded the completely stock Telstra Odin ROM, flashed through Odin successfully - SAME ERRORS. Tried to restore EFS (It said successful) - SAME ERRORS... hope you can see where I'm going with this. I've also tried CWM, flashing with different versions of TWRP, full wipe before installing any ROM, etc. tried basically anything I could find on xda without any luck - the ROMs all boot up, but as soon as they load it pops up with the same "Can't play this video" message and everything starts locking up.
This has me really worried since I tripped Knox at the very beginning before Root de la vega, I'm only hoping whoever Telstra use to fix these doesn't care about the counter.
I have literally spent two days without sleep trying everything to fix this and completely failing, so If anyone could help me out I would be forever in your debt, cheers.
Click to expand...
Click to collapse
What was the last version of firmware flashed?
You might need to flash the gsm modem for that firmware version to get it to work especially considering you have bootloops and no reception.
You might also need to use Megawipe to clear any errors that stay on your device after flash.
ultramag69 said:
What was the last version of firmware flashed?
You might need to flash the gsm modem for that firmware version to get it to work especially considering you have bootloops and no reception.
You might also need to use Megawipe to clear any errors that stay on your device after flash.
Click to expand...
Click to collapse
Hey mate, last version of firmware was the Stock Telstra SM-N9005 / TEL ROM I found on www . sammobile . com/firmwares/2/
I have tried at least 10 different ROMs with no luck, every single one does the same thing.
I did send it off to Telstra to try for a repair, they sent it back to me unrepaired due to nothing to do with the software but a 1/4mm scratch my keys made in the chrome plastic around the edge with the words "unable to be repaired due to physical damage" with a little sticker pointing to the scratch. ****ing ridiculous if you ask me.
Honestly I don't know all that much to do with the modems and csc's so it might be that causing my problems but I have tried a bunch of different ones without any change.
At my wits end here, phone is just over 30 days old and I can't use the damn thing.
try odin back to stock, then use kies to "emergency firmware restoore" Kies can be a life saver in some situation, make sure you use beta 3 version

[q] stuck in bootloop sprint ls980 please help!!!!

OK to start off i am not a noob at this, i have read though the forms and cant seem to find out why my phone will not come out of this bootloop. This started happening 2 days ago when I went to install a new rom on my phone. I powered down my phone, put it in recovery (Twrp), I wiped everything but internal storage. I then processed to flash the new rom. Everything went great. My phone rebooted and worked fine for the first 1 min, when i tried to pull down the notification bar the phone stuck off and went into a bootloop. I then tried to go back to my old rom and had the same problem (notification bar would not pull down). So i went to plan B and used the Back To Stock Form to restore the phone back to stock. The process went smooth as well not a problem at all. When the phone started up it allowed me to set up the voice navigation and name of the phone, as i went to update the prl and profile the phone shut off again, when it turned back on it starts normally and the goes to the lock screen where i am unable to make any iterations with the screen at all besides when it turns the blacklight off, as i try to use the knock on the LED light turns white but the screen will not turn back on (not even with the power button). Then it reboots to the lockscreen again and continues to do it until i manually force it off. I have tried everything from redownloading the firmware files, tried back to stock 3 times, hard factory reset, and reset in recovery mode. My phone is back to stock but i am unable to do anything with it unless i factory reset and go though the set up again, but even then i cant get a connection (even with wifi) without the phone shutting off and rebooting. Everytime the phone reboots the time reads 12:00am and switches to 12:01 really quick. I cant get a connection at ALL (I EVEN TRIED REMOVING THE SIMS AND AND PUT IT BACK IN AFTER BACK TO STOCK PROCESS.)
Im not sure if the application Dr.Web could possibly be making my phone do this. I did have it installed and did not remove before I tried to switch to the new rom. The anti-theft part was active.
SOMEONE PLEASE BE MY HERO AND HELP........I REALLY WOULD HATE TO DEAL WITH LG ON THIS ISSUE IF I CAN FIX IT MYSELF
THANKS TO EVEYONE THAT SUPPORTS AN ANSWER
Sshaffer1992 said:
OK to start off i am not a noob at this, i have read though the forms and cant seem to find out why my phone will not come out of this bootloop. This started happening 2 days ago when I went to install a new rom on my phone. I powered down my phone, put it in recovery (Twrp), I wiped everything but internal storage. I then processed to flash the new rom. Everything went great. My phone rebooted and worked fine for the first 1 min, when i tried to pull down the notification bar the phone stuck off and went into a bootloop. I then tried to go back to my old rom and had the same problem (notification bar would not pull down). So i went to plan B and used the Back To Stock Form to restore the phone back to stock. The process went smooth as well not a problem at all. When the phone started up it allowed me to set up the voice navigation and name of the phone, as i went to update the prl and profile the phone shut off again, when it turned back on it starts normally and the goes to the lock screen where i am unable to make any iterations with the screen at all besides when it turns the blacklight off, as i try to use the knock on the LED light turns white but the screen will not turn back on (not even with the power button). Then it reboots to the lockscreen again and continues to do it until i manually force it off. I have tried everything from redownloading the firmware files, tried back to stock 3 times, hard factory reset, and reset in recovery mode. My phone is back to stock but i am unable to do anything with it unless i factory reset and go though the set up again, but even then i cant get a connection (even with wifi) without the phone shutting off and rebooting. Everytime the phone reboots the time reads 12:00am and switches to 12:01 really quick. I cant get a connection at ALL (I EVEN TRIED REMOVING THE SIMS AND AND PUT IT BACK IN AFTER BACK TO STOCK PROCESS.)
Im not sure if the application Dr.Web could possibly be making my phone do this. I did have it installed and did not remove before I tried to switch to the new rom. The anti-theft part was active.
SOMEONE PLEASE BE MY HERO AND HELP........I REALLY WOULD HATE TO DEAL WITH LG ON THIS ISSUE IF I CAN FIX IT MYSELF
THANKS TO EVEYONE THAT SUPPORTS AN ANSWER
Click to expand...
Click to collapse
god that is really hard to read...did you make a back up before you do installation? if so do a restore, if you dint, download another rom, kernel, put it in your phone, wipe everything except internal storage via TWRP then flash rom then kernel.
G1_enthusiast said:
god that is really hard to read...did you make a back up before you do installation? if so do a restore, if you dint, download another rom, kernel, put it in your phone, wipe everything except internal storage via TWRP then flash rom then kernel.
Click to expand...
Click to collapse
lol sorry i wanted to be as pacific as possible. I did make a backup before flashing the rom. when i tried to go back to it i had the same problem with it rebooting after a few mins. i tried flashing furnace 0.0.8 kernel after installing a fresh rom but same problem. I am back on factory recovery atm is there anyway to flash twrp back to the phone without it being rooted? i tried to get the computer to communicate with the phone when it turns on but it wont seem to connect unless im in download mode or recovery.
Sshaffer1992 said:
lol sorry i wanted to be as pacific as possible. I did make a backup before flashing the rom. when i tried to go back to it i had the same problem with it rebooting after a few mins. i tried flashing furnace 0.0.8 kernel after installing a fresh rom but same problem. I am back on factory recovery atm is there anyway to flash twrp back to the phone without it being rooted? i tried to get the computer to communicate with the phone when it turns on but it wont seem to connect unless im in download mode or recovery.
Click to expand...
Click to collapse
so the phone turn on? try enable debugging in developer option, sometimes that works for me, not sure why.
Solution?
Sshaffer1992 said:
OK to start off i am not a noob at this, i have read though the forms and cant seem to find out why my phone will not come out of this bootloop. This started happening 2 days ago when I went to install a new rom on my phone. I powered down my phone, put it in recovery (Twrp), I wiped everything but internal storage. I then processed to flash the new rom. Everything went great. My phone rebooted and worked fine for the first 1 min, when i tried to pull down the notification bar the phone stuck off and went into a bootloop. I then tried to go back to my old rom and had the same problem (notification bar would not pull down). So i went to plan B and used the Back To Stock Form to restore the phone back to stock. The process went smooth as well not a problem at all. When the phone started up it allowed me to set up the voice navigation and name of the phone, as i went to update the prl and profile the phone shut off again, when it turned back on it starts normally and the goes to the lock screen where i am unable to make any iterations with the screen at all besides when it turns the blacklight off, as i try to use the knock on the LED light turns white but the screen will not turn back on (not even with the power button). Then it reboots to the lockscreen again and continues to do it until i manually force it off. I have tried everything from redownloading the firmware files, tried back to stock 3 times, hard factory reset, and reset in recovery mode. My phone is back to stock but i am unable to do anything with it unless i factory reset and go though the set up again, but even then i cant get a connection (even with wifi) without the phone shutting off and rebooting. Everytime the phone reboots the time reads 12:00am and switches to 12:01 really quick. I cant get a connection at ALL (I EVEN TRIED REMOVING THE SIMS AND AND PUT IT BACK IN AFTER BACK TO STOCK PROCESS.)
Im not sure if the application Dr.Web could possibly be making my phone do this. I did have it installed and did not remove before I tried to switch to the new rom. The anti-theft part was active.
SOMEONE PLEASE BE MY HERO AND HELP........I REALLY WOULD HATE TO DEAL WITH LG ON THIS ISSUE IF I CAN FIX IT MYSELF
THANKS TO EVEYONE THAT SUPPORTS AN ANSWER
Click to expand...
Click to collapse
I had the same problem except with me, i was just trying to change fonts manually. It went into a bootloop and i stressed dover it for hours until finally i found out that you have to use the lg mobile support tool (you can find it in one of these threads on the lg g2) and revert it back to stock. That fixed it perfectly fine. Its a lengthy process but simple. If that doesn't work you have to do what the lg mobile support tool does semi-manually with another program lg flash tool which is longer but just as simple if you follow the directions given in the thread to the letter.
androidfantic32 said:
I had the same problem except with me, i was just trying to change fonts manually. It went into a bootloop and i stressed dover it for hours until finally i found out that you have to use the lg mobile support tool (you can find it in one of these threads on the lg g2) and revert it back to stock. That fixed it perfectly fine. Its a lengthy process but simple. If that doesn't work you have to do what the lg mobile support tool does semi-manually with another program lg flash tool which is longer but just as simple if you follow the directions given in the thread to the letter.
Click to expand...
Click to collapse
I tried the lg flash tool and it put my phone back to stock but still have the same problem. I also tried lg mobile support tool but it will not recongize my phone. I did happen to get into settings and seen that both my imei and baseband are unknown. Could this be causeing the proble m? is there any way to fix it?
G1_enthusiast said:
so the phone turn on? try enable debugging in developer option, sometimes that works for me, not sure why.
Click to expand...
Click to collapse
Yes my phone turns on but doesnt stay on for long it will freeze and reboot i noticed my imei and baseband are unknown. Any idea what can be causeing that to happen? Could it cause the phone to reboot like it is? I am back on stock firmware again,. I did try debugging but still no luck, i was even luck enough to root it again before it rebooted but still didnt help.
Sshaffer1992 said:
Yes my phone turns on but doesnt stay on for long it will freeze and reboot i noticed my imei and baseband are unknown. Any idea what can be causeing that to happen? Could it cause the phone to reboot like it is? I am back on stock firmware again,. I did try debugging but still no luck, i was even luck enough to root it again before it rebooted but still didnt help.
Click to expand...
Click to collapse
**** thats not good at all. This happen when I was using my S3, if IMEI is gone then you could not use the phone at all, theres no way you can get it back unless you made a back up. you have to sent it in man, sorry this is as good as hard brick.
G1_enthusiast said:
**** thats not good at all. This happen when I was using my S3, if IMEI is gone then you could not use the phone at all, theres no way you can get it back unless you made a back up. you have to sent it in man, sorry this is as good as hard brick.
Click to expand...
Click to collapse
My friend also has a lg g2 that i rooted for him would i be able to use a backup from his phone. Also when i turn the phone conpletely off and hold down all 3 bottons it brings me to a hardware key settings it does shows my imei number there. If i sent it into lg would they know the phone was once rooted or does the back to stock method cover it up? Thanks for your help btw
Sshaffer1992 said:
My friend also has a lg g2 that i rooted for him would i be able to use a backup from his phone. Also when i turn the phone conpletely off and hold down all 3 bottons it brings me to a hardware key settings it does shows my imei number there. If i sent it into lg would they know the phone was once rooted or does the back to stock method cover it up? Thanks for your help btw
Click to expand...
Click to collapse
they have coders there, I'm sure if they really want to know they can figure it out. If you send it in to get it fix out of your own pockets (meaning you pay them) then i'm sure they dont care, but if you want a replacement due to warranty then it may be a different story.
Sshaffer1992 said:
Yes my phone turns on but doesnt stay on for long it will freeze and reboot i noticed my imei and baseband are unknown. Any idea what can be causeing that to happen? Could it cause the phone to reboot like it is? I am back on stock firmware again,. I did try debugging but still no luck, i was even luck enough to root it again before it rebooted but still didnt help.
Click to expand...
Click to collapse
That suck bro I'm facing the same issue right now hope you got it repaired if so feel free to share the process lol
Nba2kgod said:
That suck bro I'm facing the same issue right now hope you got it repaired if so feel free to share the process lol
Click to expand...
Click to collapse
I eneded up restoreing my phone back to stock and took it into my local sprint store it cost ne 75 dollars to replace the phone not under warranty (if u have sprint protection its free) i told them i took and ota update and it started rebooting itself. If you do get a replacement make sure u back up your efs files to a safe place on your phone. Theses files can become corrupted by flashing roms and kernals.
Sshaffer1992 said:
I eneded up restoreing my phone back to stock and took it into my local sprint store it cost ne 75 dollars to replace the phone not under warranty (if u have sprint protection its free) i told them i took and ota update and it started rebooting itself. If you do get a replacement make sure u back up your efs files to a safe place on your phone. Theses files can become corrupted by flashing roms and kernals.
Click to expand...
Click to collapse
Not under warranty? Doesn't it have a 1 year manufacturer warranty? The G2 wasn't released on Sprint until November last year so it should have been covered.
Sent from my LG-LS980 using Tapatalk
Yes its still under manufacturer warranty but when i made a repair order with lg it said it would take 2 to 3 weeks to get my phone back and if they found out it was due to being rooted and flashing roms im sure lg would of charged a arm a leg to repair it. With sprint i got a new phone in 2 days or ordering it.

[Q] Note 3 stuck in some weird "Factory Mode" No lock screen

Hi Guys!
Sorry, I couldnt find any problem similar to mine regarding note 3.
Device: N900W8 Canadian (Rogers)
TLDR: After flashing a rom a second time (First time was perfect) phone says its in factory mode and now stock lockscreen doesnt work at all no matter what settings. In factory mode wifi is one of the settings it says isnt suppose to work but it does work, and Im extra confused.
Steps leading to the problem:
- Rooted using cf auto root
- twrp to backup entire stock rooted rom
- flashed Darthstalker v6
- phone works flawlessly, except with gps issues which I suspected was not a rom issue
- decided to test it out anyways, tried to restore my stock rooted backup but for some reason failed (Honestly have no idea why)
- flashed Darthstalker v6 again, complete clean install to see if GPS fixes itself
Phone now boots up normally, but on first boot up it showed a short popup that disappears shortly saying something like this
"Factory mode is ON, in this mode some settings such as wifi may not work blah blah blah"
Thing is, it does work, so far the only difference that I see from this mode is that I cant have a lock screen no matter what setting I put on it. Right now forced to use an alternative lockscreen (Go locker).
Just flashed Jedi Elite v5 yesterday, same issue as above, but everything else is working fine...
Thanks for the help guys!
I suspect it is and EFS thing, but I dont know what that is.
I used root explorer to look in the folder and nothing seems to be inside (Even when selecting to view hidden files and folders)
Unfortunately since my original stock root backup did not work I have no way of restoring the original. If you think this is the issue can someone point me in the right direction to get my EFS folder proper? Currently I only see Backup/restore options. Not the full EFS folder that I think I might need.
Two more things I noticed
- 4 way reboot doesnt work, it just turns off the phone
- when playing youtube "An error occurred" appears for maybe 10 seconds and disappears. Video is playing in the background so its pretty annoying.
Download this file by firasusman and flash thru recovery. Don't know if the lockscreen will come back but if it doesn't reinstall whichever rom you have right now to fix the broken file.

Please help! System process not responding

Hello all. I've had a Verizon note 3 since release. I've been running HyperDrive 6 on 4.3 since I got the phone. I've had no reason to update at all, not to mention when I first got it I didn't understand knox so now my knox counter is 0x1. Its been great and themed and untouched for at least 3 months. Today I noticed everytime I opened an app it was upside down, and flipping my phone didn't help. So, I rebooted it.
Ever since that reboot about 3 hours ago I have been unable to get it to reboot fully. It boots up, gets to the lock screen and freezes for about 10 seconds then pops an error saying System process not responding "wait or close". I've done both options with no luck. I've booted into safestrap, cleared cache, recovered to my most recent (April) recovery, booted into stock rom slot, EVERYTHING ends in system process freezing and rebooting.
Why is it doing this out of nowhere? How do I make it stop? What is even wrong? I need this phone for work and in the 3 hours without it have already gotten crap via email for being unresponsive to phone calls.
I have zero idea how to update to KK with my knox counter voided. I'd prefer not to anyway since 4.3 HD6.0 worked great and was themed to my liking.
But I need this phone working, so I'm taking ideas.
Thanks for your help.
Have you tried using Odin if not might wanna start with that use a computer download the stock firmware tar file use Odin to flash the phone back to stock. That's what I would do I don't know what's wrong with you phone but that might help undo what was done.
burkechrs1 said:
Hello all. I've had a Verizon note 3 since release. I've been running HyperDrive 6 on 4.3 since I got the phone. I've had no reason to update at all, not to mention when I first got it I didn't understand knox so now my knox counter is 0x1. Its been great and themed and untouched for at least 3 months. Today I noticed everytime I opened an app it was upside down, and flipping my phone didn't help. So, I rebooted it.
Ever since that reboot about 3 hours ago I have been unable to get it to reboot fully. It boots up, gets to the lock screen and freezes for about 10 seconds then pops an error saying System process not responding "wait or close". I've done both options with no luck. I've booted into safestrap, cleared cache, recovered to my most recent (April) recovery, booted into stock rom slot, EVERYTHING ends in system process freezing and rebooting.
Why is it doing this out of nowhere? How do I make it stop? What is even wrong? I need this phone for work and in the 3 hours without it have already gotten crap via email for being unresponsive to phone calls.
I have zero idea how to update to KK with my knox counter voided. I'd prefer not to anyway since 4.3 HD6.0 worked great and was themed to my liking.
But I need this phone working, so I'm taking ideas.
Thanks for your help.
Click to expand...
Click to collapse
Sorry i got no idea what you can do, maybe oding back? But this is not the correct place to put a question... I am kind of sure you know that and if you didn't then read the forum rules.
Awesome ROM bro, I'll give it a try!!

[Q] sgh 1337 UN stuck on Samsung splash screen (safe strap broken)

So, I have gotten myself in a bit of a pickle I however think I can get out of it by sideloading using EXT. SD, Im not sure what to flash to solve the dillemma however. So this is the situation. I have a (had) a rooted Galaxy s4 (sgh-i337 ucufnc1) with 4.4.2 android. It had safestrap installed and back ups of everything else in sd card and other locations just in case. The phone was acting buggy, so I formatted the phone with safestrap, the problem persisted, ill get into the issue a bit further down. So I booted back into safestrap, and did a complete wipe, however my sd card must've bumped out, because it didnt delete any media files or so it said, and then after the wipe it crashed. and refuses to boot into safestrap or even past the splash logo. I can get into download mode, but usb debugging isnt on anymore since i wiped it, I can get into the other mode as well ( cant for the life of me remember the name of it atm although i use it frequently) with some luck. I also happen to have all .md5 files from a backup i did about 4 months ago in tact, I cannot for the life of me get them to convert properly to apply them to the phone without safestrap however, if anyone has any insight to this please let me know also.
I can/will list any other information I have if anyone needs it, and if anyone can help it would safe a life!
The reason i reformatted it to begin with, was because media would stall, and when i plugged in the audio jack it'd freeze the entire app using it, then the whole phone would freeze. I believe it was due to lucky patcher but im unsure. The issue began when I altered the auto update file, and even after i rectified it, it persisted. At this time i have a phone soft bricked because it didnt delete all the media files and I assume something bugged onto the kernel image but Im not sure. If I can simply try to restore it to stock kernel then im fine with that.
Ghujii said:
So, I have gotten myself in a bit of a pickle I however think I can get out of it by sideloading using EXT. SD, Im not sure what to flash to solve the dillemma however. So this is the situation. I have a (had) a rooted Galaxy s4 (sgh-i337 ucufnc1) with 4.4.2 android. It had safestrap installed and back ups of everything else in sd card and other locations just in case. The phone was acting buggy, so I formatted the phone with safestrap, the problem persisted, ill get into the issue a bit further down. So I booted back into safestrap, and did a complete wipe, however my sd card must've bumped out, because it didnt delete any media files or so it said, and then after the wipe it crashed. and refuses to boot into safestrap or even past the splash logo. I can get into download mode, but usb debugging isnt on anymore since i wiped it, I can get into the other mode as well ( cant for the life of me remember the name of it atm although i use it frequently) with some luck. I also happen to have all .md5 files from a backup i did about 4 months ago in tact, I cannot for the life of me get them to convert properly to apply them to the phone without safestrap however, if anyone has any insight to this please let me know also.
I can/will list any other information I have if anyone needs it, and if anyone can help it would safe a life!
The reason i reformatted it to begin with, was because media would stall, and when i plugged in the audio jack it'd freeze the entire app using it, then the whole phone would freeze. I believe it was due to lucky patcher but im unsure. The issue began when I altered the auto update file, and even after i rectified it, it persisted. At this time i have a phone soft bricked because it didnt delete all the media files and I assume something bugged onto the kernel image but Im not sure. If I can simply try to restore it to stock kernel then im fine with that.
Click to expand...
Click to collapse
UPDATE: I resolved the issue, by rooting, safestrapping, ripping the image files, from another galaxy s4 with alike descriptions. then i managed to side load it, then it booted properly, i then reformatted it completely back to 100% factory everything. Now my original problem persists, and i cant help feel that google services is causing it. (examnples of issues" proccess.gapps has stopped. anotrher process error code. phone calls can be made, but not recieved as it seems the server is too busy to n otice it, massive battery drain, audio takes several seconds to play, while video continues to play fine, audiojack is mostly unresponsive, phone calls that are made cannot recieve or send audio during call session, phone may freeze at unlock screen, or any time during operation, may even reboot from process overloading" now keep in mind. i removed every system file and app that the natural reformat will allow. so nothing applied by the user is on the phone, other than natural factory applications. Im digging a bit into the phone as i can but its a slow process whenit starts freezing. if anyone has any idea of what can be causing this, or how to fix this please inform me lol.
Ghujii said:
UPDATE: I resolved the issue, by rooting, safestrapping, ripping the image files, from another galaxy s4 with alike descriptions. then i managed to side load it, then it booted properly, i then reformatted it completely back to 100% factory everything. Now my original problem persists, and i cant help feel that google services is causing it. (examnples of issues" proccess.gapps has stopped. anotrher process error code. phone calls can be made, but not recieved as it seems the server is too busy to n otice it, massive battery drain, audio takes several seconds to play, while video continues to play fine, audiojack is mostly unresponsive, phone calls that are made cannot recieve or send audio during call session, phone may freeze at unlock screen, or any time during operation, may even reboot from process overloading" now keep in mind. i removed every system file and app that the natural reformat will allow. so nothing applied by the user is on the phone, other than natural factory applications. Im digging a bit into the phone as i can but its a slow process whenit starts freezing. if anyone has any idea of what can be causing this, or how to fix this please inform me lol.
Click to expand...
Click to collapse
The best solution must be installing the stock firmware via odin. Since you are on NC1 , You can installed the stock NB1.
Here is guide explaining you using odin, installing NB1, root with towel root, updated NC1, install the safestrap. The guide was not specifically written for that but you can find those steps in the guide.
I will attempt to do this, since nothing since has work. I am about to get a new logic board for the system in the next 2 weeks. Towel root DOES typically work on this system, however the last time I attmpted it it failed to work outright. Im not sure what has changed with the device, but i believe reflashing stock is the best method. The phone now, will boot up, then skip the lock screen and go straight to the home screen, which is black with no pull down bar, or with no signal and there is no way to rectify it. Even if there were, it boots back down and launches back up and becomes locked at the ATT logo.
After a fair bit of messing with it, and recovery mode it will sometimes boot normally where it tells me that processes has failed and askes me to cancel the ''app''. This is the best option to update the phone and attempt root, but getting it here is so difficult because it reboots itself and the mode is rare to acquire. This problem either is due to the kernel, or the rom i believe. I also am to believe the powercell may have some issue, as i replaced the battery a few weeks back and it worked fine for about 1 week.
Booting into safemode doesnt work either as it skips over the lock screen straight to the home screen. Outsidce of replacing the logic board, or attempting another flash im at the end of the short rope i was already on in terms of options.
sway8966 said:
The best solution must be installing the stock firmware via odin. Since you are on NC1 , You can installed the stock NB1.
Here is guide explaining you using odin, installing NB1, root with towel root, updated NC1, install the safestrap. The guide was not specifically written for that but you can find those steps in the guide.
Click to expand...
Click to collapse
UPDATE: I found therein two methods to flashback to stock. I did so, then proceeded to attempt to flash from nb1 to nj4. Progress stopped there when it flung an error 7 at me. So this means either something in my phone is corrupted or the file i downloaded from the above mentioned forum is corrupted. I also attempted flashfire, but seen as it STILL crashes at random due to process errors thats almost impossible to attempt.

Categories

Resources