Related
Can someone please help me, or point me in the right direction on how to setup and run simple commands through adb on a MAC? Yes, I've used the search, and yes I've searched all over the internet but I still cannot figure it out. Sorry for my stupidity lol
But any help would be greatly appreciated, thank you
Perhaps you could say a few words about what you have tried already and where you are stopped.
I'm assuming you've downloaded and installed the Mac version of the SDK, yes?
On the phone, you need to turn on Settings -> Applications -> Development -> USB debugging (and may as well check "Stay awake", too).
I don't have a OS/X box, but on Linux you need to perform the *first* adb command as root... the first time an "adb" command is run (after a reboot) it starts up an adb-server process, and that needs to be priviliged enough to write to USB. (After that, you can run adb commands as any user, since those commands "talk" to the adb-server on your Mac, which in turn talks to the phone over the USB cable.)
bftb0
Go to developer. android. com/sdk/index.html (take out the spaces - I still can't post links for some reason) and download the Android SDK for Mac. That same page also includes directions on how to get started with installation. You'll be using the Terminal within Mac OS X for ADB commands, so I would recommend getting comfortable with Terminal before jumping into the SDK. Unfortunately, you'll have to look this up because I couldn't even begin to explain everything, nor do I have the time. Hope the rest helps, though.
bftb0 said:
Perhaps you could say a few words about what you have tried already and where you are stopped.
I'm assuming you've downloaded and installed the Mac version of the SDK, yes?
On the phone, you need to turn on Settings -> Applications -> Development -> USB debugging (and may as well check "Stay awake", too).
I don't have a OS/X box, but on Linux you need to perform the *first* adb command as root... the first time an "adb" command is run (after a reboot) it starts up an adb-server process, and that needs to be priviliged enough to write to USB. (After that, you can run adb commands as any user, since those commands "talk" to the adb-server on your Mac, which in turn talks to the phone over the USB cable.)
bftb0
Click to expand...
Click to collapse
Yes I've downloaded and installed the sdk, turned debugging on and now im trying to flash the recovery image onto my phone and that is where im lost at because I don't know exactly what to do
Los-O said:
Yes I've downloaded and installed the sdk, turned debugging on and now im trying to flash the recovery image onto my phone and that is where im lost at because I don't know exactly what to do
Click to expand...
Click to collapse
Note that what you are asking (now) is completely different than what you asked about in your OP - in fact, OS X is immaterial, really, in light of what you just indicated. That suggests that you are in a hurry... if that is the case, I recommend you spend a couple days reading before you rush off and do something you might regret. It is evident from your response that you really have not been reading the threads here with much diligence.
If you are trying to flash a recovery image, that implies that your phone is already rooted; either that what you are trying it isn't going to work - you have to have a rooted phone to begin with before you flash a custom recovery image. At the moment, you can root your Eris only if it has a 1.5 (1.16.605.1 or 1.17.605.1) official Verizon/HTC release on it. This has been described if not a hundred times in the threads here, at least tens of times - you need to read some more.
Nevertheless, if you want to rush into something, here is a step by step set of instructions which was current a couple of days ago. I won't vouch for it being 100% up to date with the latest and greatest images (either ROM or recovery), but it completely describes the process involved.
Stock 1.5 --> Root (2.1) install --> Custom Recovery install -> recovery to custom ROM 0.3. That's what is working at the moment.
bftb0
bftb0 said:
Note that what you are asking (now) is completely different than what you asked about in your OP - in fact, OS X is immaterial, really, in light of what you just indicated. That suggests that you are in a hurry... if that is the case, I recommend you spend a couple days reading before you rush off and do something you might regret. It is evident from your response that you really have not been reading the threads here with much diligence.
If you are trying to flash a recovery image, that implies that your phone is already rooted; either that what you are trying it isn't going to work - you have to have a rooted phone to begin with before you flash a custom recovery image. At the moment, you can root your Eris only if it has a 1.5 (1.16.605.1 or 1.17.605.1) official Verizon/HTC release on it. This has been described if not a hundred times in the threads here, at least tens of times - you need to read some more.
Stock 1.5 --> Root (2.1) install --> Custom Recovery install -> recovery to custom ROM 0.3. That's what is working at the moment.
bftb0
Click to expand...
Click to collapse
I've already rooted my phone
Los-O said:
I've already rooted my phone
Click to expand...
Click to collapse
Well, then you should be on your way; the instructions for what you are trying to attempt are in that link I provided for you in answer to your question (which you purposely redacted when you quoted my post).
I understand that it's your first post, and I should give some leeway for that reason alone, especially since you might have gotten root without ever having used "adb" or "fastboot". (PB00IMG.ZIP method).
On the other hand, I think you can see my point. Please try to avoid wasting other people's time by providing them useful & relevant details of your situation so they can give you good answers. And reading some of the links adjacent to your own post which actually give exactly the details you are asking for might be a good idea, too.
You wanted to know "What are the directions to DisneyWorld?", but instead asked "How do I put gas in my car?" - when you already knew exactly how to do that. But don't take my word for it - reread your first post for yourself - it actually says nothing about what you are trying to do.
I don't know, maybe I got this all wrong, and you still don't have your phone talking to your OS X machine correctly with adb, and that's the source of the trouble. But then, there would be no way to know one way or another - you haven't really said.
bftb0
Download the android sdk and run this automator script.
20 Questions
Los-O:
You said "any help would be greatly appreciated." Maybe that will also include help from the surly folks, such as me.
You said you have "downloaded and installed the SDK". Let's start there. (Also, note that the Android SDK for Mac OS X is only for x86 Apple machines - stop right here if you are using an older PPC based OS X machine).
The Mac SDK is in a .zip file. I presume that means that you unzipped it somewhere on your hard drive, and that you can remember what the folder name/directory name is where you unpacked all those files. (From where I sit, that could mean that you used a GUI based tool, or something from the command line to unpack the files; but I am guessing.)
Here is a flowchart to help you with the steps.
(1) Have you successfully run the "adb" command from within a Terminal window? (Yes: goto (4), No: Continue)
(2) Do you know how to open a Terminal window in OS X? (Yes: goto (4), No: Continue)
(3) Have a look at this information about Terminal on OS X, and then
(4) Start a Terminal window up.
(5) When you type the command (followed by hitting the Enter key):
Code:
adb --help
at the command line, do you get a pageful of information about the adb command, or an error such as "command not found"? (Help Info: goto step (7), No: Continue)
(6) Add to your PATH the location of the SDK tools (including "adb"). For this step, you need to recall where you unpacked your .zip file. On my Linux box, the "adb" command (and others) are located in the folder at
/opt/android/android-sdk_r05-linux_86/tools/
where the part "/opt/android/" is the folder I unzipped them in. For OS X, surely the next folder name in the path is something other than "android-sdk-linux_86" - just poke around in whatever OS X uses as a file browser, and look for the "tools" folder underneath where you unpacked the files. Once you have done that, you should be able to type the full "path" to that (tools) folder in a command.
Let's suppose that the complete path to that "tools" folder looks something like this:
/HardDrive1/foo/bar/android-sdk_r05-mac_86/tools
Then, for example, we would add this to the current terminal (shell) PATH using the following command:
Code:
export PATH=${PATH}:/HardDrive1/foo/bar/android-sdk_r05-mac_86/tools
Obviously, you would change the part "HardDrive...86" so it matches the complete path to the "tools" folder in the SDK which you unpacked onto your machine.
You can inspect the value of PATH for correctness by typing the command
Code:
echo $PATH
Now, go back to step (5) and keep at steps 5-6 until you are able to run the "adb --help" command successfully - that is, get it to print some help information. Don't close this Terminal window after you have the PATH set correctly - we are going to use it shortly.***
(7) Plug the phone into the USB cable and the USB cable into the computer
(8) On the phone, make sure that Settings -> Applications -> Development -> USB debugging is toggled on.
(9) In the terminal window from step (6), type the commands
Code:
adb kill-server
adb devices
You will see one of three things at this point after the "adb devices" command executes:
A. (this is what we want to see)
Code:
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
HT9ABCDnnnnn device
If you see this, very good: adb has detected your phone and talked to it; continue to step # (10).
B. (not good - you probably need to run adb as the root user)
Code:
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
???????????? no permissions
In this case, the "adb" command ran, and detected the presence of the phone, but does not have sufficient privileges to write to the USB device; whether or not this happens in a given flavor or Unix (e.g. OS X) depends on what user and group permissions are set on the device, and which "groups" regular users are in. Not having OS X in front of me, I can not predict; but the solution in this case is to run the command as the root user.
It is my impression that OS X has the "sudo" command for this purpose (read here); if that is the case, then you might want to run the commands
Code:
adb kill-server
sudo `which adb` devices
If sudo is not available to you, or not setup correctly, you might have to read this Apple Technical Note, or this one, or this one
C. (some other problem - no USB device is detected)
Code:
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
Your on your own for this one - consult your local Apple OS X expert!
(10) Now you are ready to communicate with the phone using "adb" commands.
Note that running the "adb" command for the first time after your OS X machine is booted up creates a long lived adb "server" process. (You might see it in a "ps" command listing as "adb fork-server"). That process is what actually communicates with the phone. Any subsequent "adb" command first communicates with that "adb server" on your OS X machine, and then the server communicates with the phone.
Sometimes it goes stale or gets cranky after unplugging the phone too many times. Simply re-start if you want by doing a "adb kill-server" (any user can do this), followed by any adb command, keeping in mind the results from step # (9) above.
OK, whew! The desired goal was to get a recovery image loaded on to the Eris after it had been rooted - it is time to do that, as adb is working now.
See the Instructions by GrdLock here, in the section entitled "II. Installing Amon's recovery image"
bftb0
***The setting of the PATH when you use the Terminal app using the directions given in step # (6) only last for the life of a single Terminal session. If you want to make this change in such a way that it will be already set up every time you open a new Terminal window, you need to do this by editing a file in your home folder - either ".bash_profile" or ".bashrc" . (Different files names are used depending on which "shell" is used). Setting this up is an exercise left up to the interested reader.
Once you have the android sdk unzipped, add the full path to the android tools directory to your path.
I just added the path to my .bash_profile.
For me it looks like this:
export ANDROID-SDK=/Users/Aaron/android-sdk/
export PATH=$ANDROID-SDK/toolsATH
Then I save and close my bash_profile and run the command, from the terminal:
source .bash_profile
This reloads the bash_profile into the shell. Then cd to your android tools directory. Once you get into the tools directory type the command adb. If everything is correct you should see a help menu spit out to the console.
If you need help with your bash_profile a simple google search will help you out.
hey bftb0,
just wanted to chime in and say thanks for that step-by-step. been wrestling with the same issues as the original poster and your walk through got it going. thanks for being patient.
taocow
bftb0,
thank you so so soo much for that last post, I think i've finally figured it out. and also thank you for your patience, i wish i could buy you a coke or something lol
taocow said:
hey bftb0,
just wanted to chime in and say thanks for that step-by-step. been wrestling with the same issues as the original poster and your walk through got it going. thanks for being patient.
taocow
Click to expand...
Click to collapse
los-O said:
bftb0,
thank you so so soo much for that last post, I think i've finally figured it out. and also thank you for your patience, i wish i could buy you a coke or something lol
Click to expand...
Click to collapse
taocow / los-O
Did you need to run the first "adb" command as root with "sudo" ? Let me know - and also mention the version of OS X that you are using; maybe it will help other Mac users if they read this thread. (I got the impression from reading a little bit that different releases of OS X might handle "sudo" a little differently - or have different device permissions for regular users.)
Also, in reviewing this thread, I have to say ... I acted like an a$$. And I should know better, I did IT for a while. If there is one thing I learned about dealing with people and computers, it's that it is extremely easy for a misunderstanding to occur, and especially if you are helping someone out over the phone or via mail/forum. Please accept my apologies.
bftb0
bftb0 said:
taocow / los-O
Did you need to run the first "adb" command as root with "sudo" ? Let me know - and also mention the version of OS X that you are using; maybe it will help other Mac users if they read this thread. (I got the impression from reading a little bit that different releases of OS X might handle "sudo" a little differently - or have different device permissions for regular users.)
Also, in reviewing this thread, I have to say ... I acted like an a$$. And I should know better, I did IT for a while. If there is one thing I learned about dealing with people and computers, it's that it is extremely easy for a misunderstanding to occur, and especially if you are helping someone out over the phone or via mail/forum. Please accept my apologies.
bftb0
Click to expand...
Click to collapse
also now im able to install the recovery (thanks to you) but when i try and push the recovery and flash images i get
"cannot stat 'recovery.img': No such file or directory" same for the flash image
but i put the files in the tools folder like the guide said to do...?
also im on OS X 10.6.2, but no i didnt have to use the "sudo" thing you were talking about, the "adb devices" command worked the first try. and dont worry about it, i understand where you were coming from. but apology accepted, though
Los-O said:
also now im able to install the recovery (thanks to you) but when i try and push the recovery and flash images i get "cannot stat 'recovery.img': No such file or directory" same for the flash image but i put the files in the tools folder like the guide said to do...?
Click to expand...
Click to collapse
That sounds like you are referring to the files by name, but they are not in the current directory where you are running the fastboot command.
The "pwd" command (Print Working Directory) tells you what your current directory is.
The "cd folder-path" command (Change Directory) allows you to change the Terminal/Shell's idea of where the "current directory" is.
The idea behind the PATH variable is that it is a searchable list (separated by ':' colon characters), so that you can be in a given directory with the files you want to manipulate, but the commands you use are in other directories. When you start a command by typing its' name, the Terminal/Shell app walks through that list of folders in PATH (from left to right in order), looking for that program by name.
That means that if you want to run a program ("proggie") that opens a file ("myfile") that is in the current directory you might type the command.
$ proggie myfile
(or $ proggie ./myfile )
... and as long as "proggie" was in one of the folders listed in your PATH, it would run, and find your file "myfile".
But, there is no requirement that you be in the same directory with your files, or the program that you are running (for instance "fastboot"). In those cases, you need to explicitly specify the complete path to your files or programs, so they can be found. For instance:
$ proggie /users/los-o/mystuff/project3/myfile
or, if "proggie" was not in a folder in your PATH, but you knew that it was located in /opt/tools, you could type the command
$ /opt/tools/proggie myfile
If your current directory contains the file "myfile", or
$ /opt/tools/proggie /users/los-o/mystuff/project/myfile.
Same deal with fastboot - you give it the name of the recovery file as the 3rd argument on the "command line"
$ fastboot flash recovery name-of-my-copy-of-the-recovery-file.img
bftb0
*Whew!* Ok thanks again bftb0 for all the help, I think im finally starting to get the hang of this adb stuff
u have a knack for teaching
bftb0 said:
Los-O:
You said "any help would be greatly appreciated." Maybe that will also include help from the surly folks, such as me.
You said you have "downloaded and installed the SDK". Let's start there. (Also, note that the Android SDK for Mac OS X is only for x86 Apple machines - stop right here if you are using an older PPC based OS X machine).
The Mac SDK is in a .zip file. I presume that means that you unzipped it somewhere on your hard drive, and that you can remember what the folder name/directory name is where you unpacked all those files. (From where I sit, that could mean that you used a GUI based tool, or something from the command line to unpack the files; but I am guessing.)
Here is a flowchart to help you with the steps.
(1) Have you successfully run the "adb" command from within a Terminal window? (Yes: goto (4), No: Continue)
(2) Do you know how to open a Terminal window in OS X? (Yes: goto (4), No: Continue)
(3) Have a look at this information about Terminal on OS X, and then
(4) Start a Terminal window up.
(5) When you type the command (followed by hitting the Enter key):
Code:
adb --help
at the command line, do you get a pageful of information about the adb command, or an error such as "command not found"? (Help Info: goto step (7), No: Continue)
(6) Add to your PATH the location of the SDK tools (including "adb"). For this step, you need to recall where you unpacked your .zip file. On my Linux box, the "adb" command (and others) are located in the folder at
/opt/android/android-sdk_r05-linux_86/tools/
where the part "/opt/android/" is the folder I unzipped them in. For OS X, surely the next folder name in the path is something other than "android-sdk-linux_86" - just poke around in whatever OS X uses as a file browser, and look for the "tools" folder underneath where you unpacked the files. Once you have done that, you should be able to type the full "path" to that (tools) folder in a command.
Let's suppose that the complete path to that "tools" folder looks something like this:
/HardDrive1/foo/bar/android-sdk_r05-mac_86/tools
Then, for example, we would add this to the current terminal (shell) PATH using the following command:
Code:
export PATH=${PATH}:/HardDrive1/foo/bar/android-sdk_r05-mac_86/tools
Obviously, you would change the part "HardDrive...86" so it matches the complete path to the "tools" folder in the SDK which you unpacked onto your machine.
You can inspect the value of PATH for correctness by typing the command
Code:
echo $PATH
Now, go back to step (5) and keep at steps 5-6 until you are able to run the "adb --help" command successfully - that is, get it to print some help information. Don't close this Terminal window after you have the PATH set correctly - we are going to use it shortly.***
(7) Plug the phone into the USB cable and the USB cable into the computer
(8) On the phone, make sure that Settings -> Applications -> Development -> USB debugging is toggled on.
(9) In the terminal window from step (6), type the commands
Code:
adb kill-server
adb devices
You will see one of three things at this point after the "adb devices" command executes:
A. (this is what we want to see)
Code:
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
HT9ABCDnnnnn device
If you see this, very good: adb has detected your phone and talked to it; continue to step # (10).
B. (not good - you probably need to run adb as the root user)
Code:
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
???????????? no permissions
In this case, the "adb" command ran, and detected the presence of the phone, but does not have sufficient privileges to write to the USB device; whether or not this happens in a given flavor or Unix (e.g. OS X) depends on what user and group permissions are set on the device, and which "groups" regular users are in. Not having OS X in front of me, I can not predict; but the solution in this case is to run the command as the root user.
It is my impression that OS X has the "sudo" command for this purpose (read here); if that is the case, then you might want to run the commands
Code:
adb kill-server
sudo `which adb` devices
If sudo is not available to you, or not setup correctly, you might have to read this Apple Technical Note, or this one, or this one
C. (some other problem - no USB device is detected)
Code:
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
Your on your own for this one - consult your local Apple OS X expert!
(10) Now you are ready to communicate with the phone using "adb" commands.
Note that running the "adb" command for the first time after your OS X machine is booted up creates a long lived adb "server" process. (You might see it in a "ps" command listing as "adb fork-server"). That process is what actually communicates with the phone. Any subsequent "adb" command first communicates with that "adb server" on your OS X machine, and then the server communicates with the phone.
Sometimes it goes stale or gets cranky after unplugging the phone too many times. Simply re-start if you want by doing a "adb kill-server" (any user can do this), followed by any adb command, keeping in mind the results from step # (9) above.
OK, whew! The desired goal was to get a recovery image loaded on to the Eris after it had been rooted - it is time to do that, as adb is working now.
See the Instructions by GrdLock here, in the section entitled "II. Installing Amon's recovery image"
bftb0
***The setting of the PATH when you use the Terminal app using the directions given in step # (6) only last for the life of a single Terminal session. If you want to make this change in such a way that it will be already set up every time you open a new Terminal window, you need to do this by editing a file in your home folder - either ".bash_profile" or ".bashrc" . (Different files names are used depending on which "shell" is used). Setting this up is an exercise left up to the interested reader.
Click to expand...
Click to collapse
excellent post...very helpful
Los-O said:
Can someone please help me, or point me in the right direction on how to setup and run simple commands through adb on a MAC? Yes, I've used the search, and yes I've searched all over the internet but I still cannot figure it out. Sorry for my stupidity lol
But any help would be greatly appreciated, thank you
Click to expand...
Click to collapse
I do everything on a Mac, so I would be the guy to ask. How far did you get? Have you unzipped the sdk to a folder?
Basically the difference between mac and others is that when others do a command like adb, we have to do ./adb This is true for other commands too. It's easy once you get used to it.
bftb0,
Thanks so much! Step 6 solved my problem
Thank you!!
bftb0 said:
Los-O:
You said "any help would be greatly appreciated." Maybe that will also include help from the surly folks, such as me.
You said you have "downloaded and installed the SDK". Let's start there. (Also, note that the Android SDK for Mac OS X is only for x86 Apple machines - stop right here if you are using an older PPC based OS X machine).
The Mac SDK is in a .zip file. I presume that means that you unzipped it somewhere on your hard drive, and that you can remember what the folder name/directory name is where you unpacked all those files. (From where I sit, that could mean that you used a GUI based tool, or something from the command line to unpack the files; but I am guessing.)
Here is a flowchart to help you with the steps.
(1) Have you successfully run the "adb" command from within a Terminal window? (Yes: goto (4), No: Continue)
(2) Do you know how to open a Terminal window in OS X? (Yes: goto (4), No: Continue)
(3) Have a look at this information about Terminal on OS X, and then
(4) Start a Terminal window up.
(5) When you type the command (followed by hitting the Enter key):
Code:
adb --help
at the command line, do you get a pageful of information about the adb command, or an error such as "command not found"? (Help Info: goto step (7), No: Continue)
(6) Add to your PATH the location of the SDK tools (including "adb"). For this step, you need to recall where you unpacked your .zip file. On my Linux box, the "adb" command (and others) are located in the folder at
/opt/android/android-sdk_r05-linux_86/tools/
where the part "/opt/android/" is the folder I unzipped them in. For OS X, surely the next folder name in the path is something other than "android-sdk-linux_86" - just poke around in whatever OS X uses as a file browser, and look for the "tools" folder underneath where you unpacked the files. Once you have done that, you should be able to type the full "path" to that (tools) folder in a command.
Let's suppose that the complete path to that "tools" folder looks something like this:
/HardDrive1/foo/bar/android-sdk_r05-mac_86/tools
Then, for example, we would add this to the current terminal (shell) PATH using the following command:
Code:
export PATH=${PATH}:/HardDrive1/foo/bar/android-sdk_r05-mac_86/tools
Obviously, you would change the part "HardDrive...86" so it matches the complete path to the "tools" folder in the SDK which you unpacked onto your machine.
You can inspect the value of PATH for correctness by typing the command
Code:
echo $PATH
Now, go back to step (5) and keep at steps 5-6 until you are able to run the "adb --help" command successfully - that is, get it to print some help information. Don't close this Terminal window after you have the PATH set correctly - we are going to use it shortly.***
(7) Plug the phone into the USB cable and the USB cable into the computer
(8) On the phone, make sure that Settings -> Applications -> Development -> USB debugging is toggled on.
(9) In the terminal window from step (6), type the commands
Code:
adb kill-server
adb devices
You will see one of three things at this point after the "adb devices" command executes:
A. (this is what we want to see)
Code:
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
HT9ABCDnnnnn device
If you see this, very good: adb has detected your phone and talked to it; continue to step # (10).
B. (not good - you probably need to run adb as the root user)
Code:
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
???????????? no permissions
In this case, the "adb" command ran, and detected the presence of the phone, but does not have sufficient privileges to write to the USB device; whether or not this happens in a given flavor or Unix (e.g. OS X) depends on what user and group permissions are set on the device, and which "groups" regular users are in. Not having OS X in front of me, I can not predict; but the solution in this case is to run the command as the root user.
It is my impression that OS X has the "sudo" command for this purpose (read here); if that is the case, then you might want to run the commands
Code:
adb kill-server
sudo `which adb` devices
If sudo is not available to you, or not setup correctly, you might have to read this Apple Technical Note, or this one, or this one
C. (some other problem - no USB device is detected)
Code:
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
Your on your own for this one - consult your local Apple OS X expert!
(10) Now you are ready to communicate with the phone using "adb" commands.
Note that running the "adb" command for the first time after your OS X machine is booted up creates a long lived adb "server" process. (You might see it in a "ps" command listing as "adb fork-server"). That process is what actually communicates with the phone. Any subsequent "adb" command first communicates with that "adb server" on your OS X machine, and then the server communicates with the phone.
Sometimes it goes stale or gets cranky after unplugging the phone too many times. Simply re-start if you want by doing a "adb kill-server" (any user can do this), followed by any adb command, keeping in mind the results from step # (9) above.
OK, whew! The desired goal was to get a recovery image loaded on to the Eris after it had been rooted - it is time to do that, as adb is working now.
See the Instructions by GrdLock here, in the section entitled "II. Installing Amon's recovery image"
bftb0
***The setting of the PATH when you use the Terminal app using the directions given in step # (6) only last for the life of a single Terminal session. If you want to make this change in such a way that it will be already set up every time you open a new Terminal window, you need to do this by editing a file in your home folder - either ".bash_profile" or ".bashrc" . (Different files names are used depending on which "shell" is used). Setting this up is an exercise left up to the interested reader.
Click to expand...
Click to collapse
Wow what a straightforward guide to helping me get this set up!! A million thanks! I don't even have an Eris, but what model of the phone you have is irrevelant to this guide...
Thanks again!!
I am following this guide here, http://ubuntuforums.org/showthread.php?t=1413313 but when i type the command
"sh android-sdk-linux_86/tools/ddms"
it says it can't open the file. Any help would be great. Thanks
btw i am already unlocked and rooted so i just need to do steps 2 and 5
does the file exist?
ddms is part of the android sdk. i'm assuming you have installed the linux version of the sdk and know where the tools directory for the installation is?
i don't think you are even required to run this step anyway:
Code:
Now, for example, if you plug in the phone and run
$ sh android-sdk-linux_86/tools/ddms
[b]you will see the phone listed. (Note: this is not a step in the howto) [/b]
-verify the file exists at the location specified
-make sure it is executable to the current user (chmod +x)
or post the exact error message here
Yep the file is there and in the right place but when i type it it tells me "Can't open android-sdk-linux_86/tools/ddms"
Anyone...all i need is to get ubuntu to recognize my phone when i plug it in...
Hmm, seems a little odd. If you type the same command but replace the "sh" with "ls -l" what comes back? Plus, what user are you logged in as?
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
I got it working yesterday, not sure what i did but ubuntu recognizes my phone now.
Hello,
Thanks for looking at this post! I wanted to post it to the rooting thread, but I'm too much of a noob to have access to developer threads. I searched around (both here and google), but couldn't find any useful info on my problem.
I'll get right to the point. I rooted my Acer A500 (after doing an OTA update to 4.0.3), as per the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=1546593
Everything seems to have worked well (I have root access, etc), but there is something quirky with Busybox. Every time I type a command in terminal (it doesn't matter which - I use both connectbot and terminal emulator), I get a "precmd: not found" message (even for simple things like directory changes). The odd thing is: the commands work, but I still get the message. For instance, if I ask for a directory listing, I'll get the listing, and at the end, it will say precmd: not found (usually with the name of the command it's referencing, e.g. bash: precmd: not found).
It seems to be looking for it in /system/xbin/bash, but bash is in /data/local; I tried creating a symlink but it didn't work ("link failed Cross-device link"). This is really a nuisance, and I'd like to try installing some linux user-land tools, but I fear the outcome might be disastrous if the busybox tools are misconfigured somehow.
I'd appreciate and help/suggestions. Many thanks.
mdhobbes said:
"precmd: not found" message
Click to expand...
Click to collapse
Connectbot seems to set shell variable 'PS1' to "$(precmd)[email protected]$HOSTNAME:${PWD:-?} $ ".
It means your shell (the busybox's ash applet) will try to use output from 'precmd' as a part of a command prompt.
So when 'precmd' was not provided, error messages will be generated wenever a prompt was to be shown.
Though the messages should be safe to ignore, you may get rid of them by setting something harmless to PS1 like:
PS1="> ", or reset PS1 by:
unset PS1from your (busybox) shell.
# The same method should work for terminal emulator.
precmd is a shell function.
To display it run this from the default shell:
Code:
typeset -f
You will see something like
Code:
function precmd {
typeset e=$?
let " e " && print -n "$e|"
}
If you add that to one of your shell's startup files (".profile", ".bashrc", etc.) you will have a working precmd.
It works (function runs), but shows nothing neither 0 or error code. What is it?
[edit]
Nvm, my fault, figured it out
These are instructions for rooting Android devices that utilize the RK3066 chipset (Cortex A9 Dual Core, MALI Quad-Core GFX).
I have tested and verified that these instructions work for the UG007 Android-on-a-stick...they *should* work with any other devices that utilize the same USB chipset. I can almost guarantee this will work on the Imito MX1/2 as you can swap ROMS from this device.
(Basically, if you have the right ADB drivers, you should be good to go)
As per every other thread you read on this site - I TAKE NO RESPONSIBILITY FOR ANY DAMAGES YOU MAY CAUSE TO YOUR DEVICE.
This is a fairly risk-free mod, but you know...$hit happens.
Okay. Let's start.
THIS TUTORIAL ASSUMES YOU HAVE ADB AND KNOW HOW TO USE IT, and that you're in a Windows environment. There are numerous places on the web where you can find this info...and I ain't yo mamma.
1. Download all the files attached to this thread.
2. Attach your RK3066 device to your computer via it's microUSB port. You'll need to have it hooked to a display too.
3. Once booted, go to system settings. Under settings > developer options, enable USB Debugging. Under settings > USB, click "connect to computer" (This may vary depending on your ROM configuration. The point here is to have debugging enabled and your computer to recognize the stick in device manager as something other than USB storage)
4. Extract the right drivers for your system (x86/x64)
5. Go to device manager on your computer. Look for the new "unknown device". Right-click, pick "update driver software"., "browse my computer".
6. Browse to wherever you extracted the drivers in step 4. Click Next. Confirm that you want to install.
7. Open a command window in the directory where you have ADB. Type "adb devices". Still nothing, right?
8. Navigate to C:\users\MYUSERNAME\.android, where "MYUSERNAME" is your User Name. (Duh?)
9. Create a file called adb_usb.ini
10. Open it in a text editor. Add the following string and save (This tells ADB to look for our Vendor ID:
0x2207
11. You should now be able to type "adb devices" at CMD and see your device.
12. Now for the fun. Extract the stuff from "pushme" to the same directory as ADB.
13. Enter the following commands (note: The "$" and "#" symbols do not get keyed in):
Code:
adb push psneuter /data/local/tmp
adb shell
$ cd /data/local/tmp
$ chmod 777 psneuter
$ ./psneuter
14. Psneuter should run and close shell when done. Enter MOAR commands:
Code:
adb kill-server
adb devices
adb shell
15. Take a good look. Is there now a "#" sign? Good. You now have root access. You may continue. If not, then proceed to go yell at me in the comments. If yes, then proceed to enter the last batch of commands to make your newfound privileges permanent:
Code:
mount -o remount,rw -t rfs /dev/block/st19 /system
exit
adb push busybox /system/bin
adb push su /system/bin
adb install Superuser.apk
adb shell
# chmod 4755 /system/bin/busybox
# chmod 4755 /system/bin/su
# mount -o remount,ro -t rfs /dev/block/st19 /system
# exit
adb reboot
After a reboot, download a root app from Play Store to see if it worked! I find Root Checker is boffo for this sort of thing:
https://play.google.com/store/apps/...tcheck&feature=nav_result#?t=W251bGwsMSwyLDNd
THANKS/CREDITS:
Aaron Orquia @ Pocketables.com for the original "universal" root method.
AMJtech's tutorial where I found working ADB drivers and the adb_usb.ini bit to get it recognized.
The guy(s) who make Super1ClickRoot for putting all the necessary files in one easy-to-find spot.
Thanks for this tutorial.
A couple of notes:
Wow !! That's a lot of extra steps for you Windows users. Mac and Linux users start at step 11 (but if you are a Mac or Linux user, you already knew that. )
Linux: If the device still does not show up in Step 11, post, and I can help (Hint: It may not be /just/ the udev stuff.)
Is step 13 necessary? adb remount works on mine. (not sure if I had to adb root first or not) but I can have a root shell via adb without psnueter.
If adb remount succeeds, skip step 14, and continue with the 3rd line of step 15.
Linuxslate said:
Thanks for this tutorial.
A couple of notes:
Wow !! That's a lot of extra steps for you Windows users. Mac and Linux users start at step 11 (but if you are a Mac or Linux user, you already knew that. )
Linux: If the device still does not show up in Step 11, post, and I can help (Hint: It may not be /just/ the udev stuff.)
Is step 13 necessary? adb remount works on mine. (not sure if I had to adb root first or not) but I can have a root shell via adb without psnueter.
If adb remount succeeds, skip step 14, and continue with the 3rd line of step 15.
Click to expand...
Click to collapse
Thanks for the input! Yes, yes, I know windoze makes more work. It's also pretty widespread for folks.
For step 13 - I think it depends on the device. It would be nice for others to weigh in and let me know if it's needed. If not, I can totally remove it.
Also, in the other ROM thread, I made, it's even easier to root - you just grab one of the pre-rooted ROMS and drop it in SD card...the system does the rest. Mind you, this is for the UG007.
Links UG007
If you Bluetooth connection is not working properly, try to install this custom ROM: http://blog.geekbuying.com/index.php/category/android-tv-stick-tv-box/ug007/
How to install CWM-based Recovery: http://androtab.info/clockworkmod/rockchip/
Both worked for me. I was able to connect my BT Keyboard/Mouse Pad combo
./psneuter
Failed to set prot mask (Inappropriate ioctl for device) ??
nice tutorial.. while finding the best way to work my ug007 i stumbled upon this thread via armtvtech.com
currently i only knew this tutorial to root the device, but looking at yours ill give it a try first.
digitalhigh said:
Also, in the other ROM thread, I made, it's even easier to root - you just grab one of the pre-rooted ROMS and drop it in SD card...the system does the rest. Mind you, this is for the UG007.
Click to expand...
Click to collapse
you cant install custom roms without flashmode, cant do flashmode without opening device.. or did i get it wrong!? talking about the ug007
actually you can install a custom rom once you are rooted without opening the device, here
Linuxslate said:
(Hint: It may not be /just/ the udev stuff.)
Click to expand...
Click to collapse
ehm.. im still preparing to root, i guess you hint at the android sdk?
if not ill holla back at you and complain why you didnt write it out in first place
but very good to know that i skip alot by "almost" only installing ubuntu to a vm
I may be missing something, but I couldn't get this to work on my UG007
psneuter didn't work for me, gave me an error about 'invalid ioctl' or something. But the strangest thing is that "adb shell" already shows the # in the prompt.
To confirm my suspitions, I also typed "adb root", which returned "adb is already running as root".
So I proceeded with the rest of the instructions. No errors appeared, installed Superuser and I can see su and busybox in system/bin
But when I download root checker it says it wasn't properly rooted. installing terminal and type "su" says permission denied - and that's it.
Am I missing something? I'm new to this rooting thing, so please don't be angry with my noobish questions
I managed to do it - but *not* by following this tutorial.
I used this: armtvtech.com/armtvtechforum/viewtopic.php?t=28 (Cant post links yet, sorry!)
Only ran the "TPSarky-VonDroid-Root" bat, and presto! I had root on UG007.
I even fixed the changing MAC address problem with wlan.ko from armtvtech.com/armtvtechforum/viewtopic.php?f=69&t=632&start=10 (link on page 2). I just copied it to /data/local/tmp, set permissions as rwr--r-- and then used root explorer to copy it to /system/lib/modules - now I have wifi signal every time I boot the device, and don't need to mess with my router config every time
I also manage to get xbox360 wired controller working. xpad.ko on /data/local/tmp and then insmod /data/local/tmp/xpad.ko - just connect the joystick after that, and it will be recognized. Only problem is, after a reboot I have to insmod again.
I tried doing the same thing I did with wlan.ko, but nothing happens - system won't load it on boot. Am I missing something here?
The psneuter is broken
I'm on Linux, running a RK3066, and psneuter gives "Failed to set prot mask (Inappropriate ioctl for device)". Running Ice Cream Sandwich 4.1.1, kernel 3.0.8+, build RK30_anpei10w1am-r4.0.57.20121207, A10-2 cpu.
SLotman said:
I may be missing something, but I couldn't get this to work on my UG007
psneuter didn't work for me, gave me an error about 'invalid ioctl' or something. But the strangest thing is that "adb shell" already shows the # in the prompt.
To confirm my suspitions, I also typed "adb root", which returned "adb is already running as root".
So I proceeded with the rest of the instructions. No errors appeared, installed Superuser and I can see su and busybox in system/bin
But when I download root checker it says it wasn't properly rooted. installing terminal and type "su" says permission denied - and that's it.
Am I missing something? I'm new to this rooting thing, so please don't be angry with my noobish questions
Click to expand...
Click to collapse
Try renaming old "su".
Check permissions on the su and busybox you installed.
MK808, MK809 [model T002], and the MK802 III anyone?
Hi,
Thanks OP for this information.
I have a Samsung S3 [my first android device] which I rooted with no problem, but am a total noob when it comes to these android sticks.
One can say they are very similar, so I wont be completely in the dark. OK, now that we got that out of the way...
Can anyone please confirm whether they have used this with the MK808, MK809 [model T002], and the MK802 III,
I have ordered these from 1 from amazon and 2 from ebay and am expecting delivery shortly, therefore I just want to make sure before I go bricking them one by one...
I notice that they all have RK3066 Cortex A9 chips but are manufactured by different companies. The ones I see on eBay, although they all bear the same code MK8xx, they all look very different! I presume the MK8xx code is a universal model?? just like 80486 was to the PC? given the case does this method work universally?
I intend to set them up with XBMC media centres and to use with a Xbox controller. Any advice on the best way for achieving this would be nice too.
Thanks
:good:
Linuxslate said:
Thanks for this tutorial.
Linux: If the device still does not show up in Step 11, post, and I can help (Hint: It may not be /just/ the udev stuff.)
Click to expand...
Click to collapse
Linuxslate, I have an MK808 that shows up in lsusb as 2207:300a when I put it in "flash mode" but it never shows up via "adb devices".
I got mine the other day and it turned out to be rooted already?
I decided to install SuperSu and that's how I found out it was rooted.
Immediately, installed Busybox, System Tuner Pro and Titanium Backup.
Rob
Rob sent this from his SPH-D710 via Tapatalk
So would this possibly work on this - http://www.zoostorm.com/Products/357-zoostorm-sl8-3305-1030-tablet-pc.aspx
States it's a Rockchip RK3066 Cortex A9 Dual Core 1.5GHz, running 4.1.1 Jelly Bean, quite interested in getting one & root would be a bonus.
psneuter broken
Hello,
the psneuter attached to the first post doesn't do anything to my ug007. I have the same error others have posted here and haven't gotten a reply about.
To unlock, I used the script that's mentioned in a post above, TPSarky-VonDroid-Root. If you google that, you'll find a download link amongst the results.
Thank u very much...:thumbup:
................................................................................................
Linuxslate said:
Try renaming old "su".
Check permissions on the su and busybox you installed.
Click to expand...
Click to collapse
Can you elaborate a little bit what you mean by renaming "su"?
I'm having the same issue..
Both su and busybox are having the same permission -rwsr-xr-x.
Sent from my Transformer Prime TF201 using XDA Premium HD app
I configured one of these at work. Upon using the terminal app and typing in su I got the # sign. They seem to come from the factory rooted already.
Sent from my Nexus 4 using xda app-developers app
ageerer84 said:
I configured one of these at work. Upon using the terminal app and typing in su I got the # sign. They seem to come from the factory rooted already.
Click to expand...
Click to collapse
Not exactly: this particular su can be used only from adb console, or at least that how it was on my tablet. So you need to replace it with a Superuser apk's su to get all features of rooted android. You can get one e.g. from FDroid
--
blog
Not sure what u mean by on your tablet. Android devices don't typically come rooted but I was surprised to have root access via terminal emulator on this stick PC. I just took it out of the box and definitely didn't have to go through the adb interface on a computer to flash superuser or what have you. Is this just me or is this a typical experience with this particular device?
Sent from my Nexus 4 using xda app-developers app
HOW TO ROOT YOUR LENOVO IDEATAB A1000
<DISCLAIMER>
By attempting these steps, your warranty will be void. Even worse than that, it might cause crashes, freezes, random explosions, 2nd degree burns, or even turn your beloved tab into $100+ paperweight. What works on mine might not work on yours, so don't attempt if you don't know what you're doing. Do at your own risk. Corrections are welcome. I must admit that I'm not an expert, so any info I posted might be wrong, and I can't offer you much help. I'm not responsible for anything arising from the use of this how-to. I can only wish you good luck.
<WHY ROOT?>
- Without root or OTA upgrades (at time of writing, Indonesian customers still can't get it), you'll be stuck with ~500MB internal memory. That's annoying.
- You're stuck with the default IO scheduler (cfq) and governor (hybrid, haven't heard that one..)
- You have an incredibly large amount of bloatware you can't get rid of, in that already cramped up internal storage
- Did I mention freedom?
<REQUIREMENTS>
This method is originally used to root Acer Iconia B1-A71. Somehow I noticed that the two actually has the same chipset, MTK8317 (if it really was relevant ). So I tried the method, and through sheer n00b's luck, it worked like a charm!
Lenovo IdeaPad A1000-G --> 4GB storage, 2G/EDGE. This method haven't been tested on A1000-T/F, different storage cap (16GB, etc.) or other variants, but it should work with slight modification. Screenshots of my specs are attached below. Remember, proceed at your own risk!
A Linux System. Never tried on Windows or Mac. I personally used Linux Mint 15. The source post uses Ubuntu.
working ADB (android-tools-adb). You can get this from synaptics, apt-get, etc. If your system can detect adb devices, you should be fine.
Superuser Binary
Busybox Binary (You can get these two from the links on original post. XDA says noobs can't post links :'( )
ORIGINAL THREAD
<CREDITS>
XDA Senior Member entonjackson, for writing such a noob-friendly how-to for rooting Acer Iconia B1-A71 and for allowing me to use it for this how-to.
XDA Member alba81, for discovering the method as acknowledged on the original post by entonjackson
All awesome gurus on XDA which I can't mention one by one.
<THE STEPS>
1. Extract the android sdk to your home folder, e.g. a user named Bob will use like /home/bob
2. Open a terminal
3. Now plug your A1000 into your machine and turn on Debugging Mode (Go into Settings -> Developer Tools, turn on Developer tools, then turn on USB Debugging Mode)
4. Now back at the keyboard of your Linux machine in your terminal type:
Code:
sudo adb devices
The output should be something like:
Code:
123456789ABCDEF device
If it's not, google for it. Somehow your Linux hasn't detected the A1000, although the android sdk for Linux brings all needed drivers with it.
If your device was found, congratulations. The adb connection between your linux machine and your tablet is intact.
5. Now extract the downloaded busybox archive to your home folder, in it there should be a busybox binary. So Bob does:
Code:
sudo ./adb push /home/bob/busybox /data/local/tmp
Code:
sudo ./adb shell
Code:
chmod 755 /data/local/tmp/busybox
6. You should copy the busybox binary into a directory where you can access it as a plain non-root user on the tablet. We need this binary. so we can apply unix tools like telnet, dd, cat, etc. But for now we need it to establish a telnet session between our tablet and our linux machine.
(This point is written on original post. Seems important, but as soon as I finished step 5, I can use those tools)
7. Dial *#*#3646633#*#* to enter Engineer Mode
8. Go to Connectivity -> CDS Information -> Network Utility
9. type the following command:
Code:
/data/local/tmp/busybox telnetd -l /system/bin/sh -p 1234
Advice from original poster: copy and paste it from the browser on your tablet, because dependent on which keyboard app installed, this can be freakin tricky. In the next step you will learn, why it's so important why this command should be correct.
10. Tap on Run. You won't get any feedback, so you will never know if the entered command runs properly or not. That's why you should make sure the command is ok.
Now we have started our telnet server on the tablet.
11. Back in the terminal type:
Code:
/data/local/tmp/busybox telnet 127.0.0.1 1234
If you now get an error like couldn't find busybox or something, then either adb push failed or you forgot to chmod, in step 5
12. Now enter:
Code:
cat /proc/dumchar_info
You should get a bunch of lines, try to find a line containing the partition named android
{..... partition list .....}
android 0x0000000028A00000 0x00000000020E8000 2 /dev/block/mmcblk0p3
{..... partition list .....}
13. We will create a dump of our android system. This is the point where different variants *MIGHT* have different parameters. This step is important, as wrong parameter will result in unmountable image.
Stop. Take a deep breath. If you're not familiar with dd, find a good doc of it. There's a plethora of them.
Get yourself a programmer's calculator (Linux Mint 15 has one built in).
Here's what you'll do :
Convert the hex number on the 3rd column into decimal. In my case (0x20E8000) will yield 34504704. Divide by 4096. The result (8424) goes to the skip parameter.
Convert the hex number on the 2nd column. In my case (0x28A00000) will yield 681574400. Divide by 4096. The result (166400) goes to the count parameter.
So the full dd command will look like :
Code:
dd if=/dev/block/mmcblk0 bs=4096 skip=8424 count=166400 | gzip > /cache/system.img.gz
Do a full sanity check before hitting enter! It will take about 5 minutes.
14. After it's finished we must make the image readable for adb, so we do:
Code:
chmod 777 /cache
and
Code:
chmod 777 /cache/system.img.gz
15. Leave the telnet, and then adb shell session by:
Code:
exit
Code:
exit
16. Now we pull our image by
Code:
sudo adb pull /cache/system.img.gz
wait 1-2 minutes.
It should be then located inside /home/bob. It did for me. If not, do a search . It should be a .gz, extract it right there (or /home/bob if it isn't there)
17. Now we need to modify our system image by adding the tiny but helpful su binary. Extract the SU binary to /home/bob.
18. We create a folder where we will mount our system image to. To create it do:
Code:
sudo mkdir /media/a1000
19. Now we mount it:
Code:
sudo mount -o loop /home/bob/system.img /media/a1000
if it fails, then you entered wrong parameters on step 13
20. Now we copy our SU binary to our mounted system image:
Code:
sudo cp /home/bob/su /media/a1000/bin
21. the su binary needs to have the proper rights to make it usable, so we 'suid' it with:
Code:
sudo chmod 06755 /media/a1000/bin/su
22. Let's unmount our baby by:
Code:
sudo umount /media/a1000
and because bob doesn't like a messed up system, he does:
Code:
sudo rm -rf /media/a1000
because he hopefully won't need it anymore.
23. We have to gzip it again to bring it back to where it belongs to. this we do by:
Code:
cd /home/bob
Code:
gzip /home/bob/system.img
24. So here we are now, we made it to the final Boss fight! The next steps are dangerous and should be performed with caution. We copy back our modified system image, which can brick your device, if you do a mistake! Enter adb shell again :
Code:
sudo adb shell
25. Remove the old boring image:
Code:
rm /cache/system.img.gz
26. Leave adb shell
Code:
exit
27. copy our cool new system image containing the su binary:
Code:
sudo adb push /home/bob/system.img.gz /cache
28. Enter adb shell again
Code:
sudo adb shell
29. Usually the telnet server on the tablet is still running, at least in my case it's been like that. That's why we can directly connect to the telnet server with:
Code:
/data/local/tmp/busybox telnet 127.0.0.1 1234
If this doesn't work, then obviously your telnet server isn't running anymore. So on your tablet if the telnet command is still entered (see step 9), tap on Run again and repeat step 29.
30. Now this is the most dangerous step in this how to (no it wasn't the mkdir one). You can copy following command to make sure everything is fine and paste it into your telnet session on your linux terminal.
<WARNING! SANITY CHECK! MAKE SURE *ALL* THE DD PARAMETERS MATCH THE FIRST DD (STEP 13) OR YOUR A1000 WILL TURN INTO A VERY EXPENSIVE PAPERWEIGHT!>
Code:
[B]/data/local/tmp/busybox zcat /cache/system.img.gz | dd of=/dev/block/mmcblk0 bs=4096 seek=8424 count=166400[/B]
After 1-2 minutes you're done, if your tablet or pc or yourself didn't catch fire, everything's fine.
31. Leave telnet / adb shell by doing
Code:
exit
Code:
exit
32. Reboot your A1000 via ADB, then exit
Code:
sudo adb reboot
Code:
exit
33. Unplug your tablet from PC
34. Install Superuser (No, not SuperSU, cause it won't work!). I personally use Superuser by ChainsDD, from Play Store
35. Be lucky. Your tablet and thus you are now free!
Don't forget to hit thanks, if this helps
hi, after step 13 (i double checked the command), i get this error
Code:
/system/bin/sh: can't create /cache/system.img.gz: Permission denied
/dev/block/mmcblk0: cannot open for read: Permission denied
I have the WiFi 4G version
Im too stuck in step 13.....nothing wrong with the script, can u give me a solution?
Im using A1000G also
@ts
Your guide work perfectl, in windows enviroment but mount step still need linux,
I've question are you using DirectoryBinding? Mine always close when playing Real Racing, its very annoying
You have suggeztion or alternative for DirectoryBinding?
Root with Windows ?
Hi,
I am a new member because i bought this tblet but i can't root. I don't have a linux environment, so there is a solution with W8 Pro 64 ?
Thanks a lot for you help,
ulisez said:
hi, after step 13 (i double checked the command), i get this error
Code:
/system/bin/sh: can't create /cache/system.img.gz: Permission denied
/dev/block/mmcblk0: cannot open for read: Permission denied
I have the WiFi 4G version
Click to expand...
Click to collapse
have you chmod-ed the busybox (or is the chmod successful without error)? Try chmod-ing the /cache before attempting step 13. It seems that you still don't have access to the NAND device (mmcblk0). Have you updated firmware via OTA?
artonelico said:
Im too stuck in step 13.....nothing wrong with the script, can u give me a solution?
Im using A1000G also
Click to expand...
Click to collapse
Do you encounter the same error message like ulisez had? Could you post the screenshot of the partition list (the lines after you execute dumchar_info)?
rmage said:
@ts
Your guide work perfectl, in windows enviroment but mount step still need linux,
I've question are you using DirectoryBinding? Mine always close when playing Real Racing, its very annoying
You have suggeztion or alternative for DirectoryBinding?
Click to expand...
Click to collapse
I personally use Link2SD by Bulent Akpinar to link apps to 2nd partition on my SDcard.
Letsar said:
Hi,
I am a new member because i bought this tblet but i can't root. I don't have a linux environment, so there is a solution with W8 Pro 64 ?
Thanks a lot for you help,
Click to expand...
Click to collapse
The original developer who posted the method (entonjackson) plans to integrate the method in the next release his toolkit, the Acer Iconia Toolkit. I think you should check his thread : http://forum.xda-developers.com/showthread.php?t=2240029
sammymaddog said:
have you chmod-ed the busybox (or is the chmod successful without error)? Try chmod-ing the /cache before attempting step 13. It seems that you still don't have access to the NAND device (mmcblk0). Have you updated firmware via OTA?
Do you encounter the same error message like ulisez had? Could you post the screenshot of the partition list (the lines after you execute dumchar_info)?
I personally use Link2SD by Bulent Akpinar to link apps to 2nd partition on my SDcard.
The original developer who posted the method (entonjackson) plans to integrate the method in the next release his toolkit, the Acer Iconia Toolkit. I think you should check his thread : http://forum.xda-developers.com/showthread.php?t=2240029
Click to expand...
Click to collapse
Link2SD doesn't link app data, do you have any option?
yes i had same message with ulyses, by the way im from indonesia too can i contact you through chat client?
oh yeah im using windows 7 and using cmd as a terminal in linux
thx before bro
sammymaddog said:
The original developer who posted the method (entonjackson) plans to integrate the method in the next release his toolkit, the Acer Iconia Toolkit. I think you should check his thread : http://forum.xda-developers.com/showthread.php?t=2240029
Click to expand...
Click to collapse
Ok, i see his toolkit. It's very good. I'll wait
rmage said:
Link2SD doesn't link app data, do you have any option?
Click to expand...
Click to collapse
I'm not sure whether the stock kernel of our devices supports init.d, thus supports CronMod/Data2SD. Lenovo locked our bootloader, and currently there's no way around it. So I personally think, Link2SD method are the best option for now.
Let's give it several months until our dev gurus bring their miracles upon this device
The attached image shows mt6577 Hardware, can u provide the Soc details please
Hi, Can any one upload Lenovo ideatab A1000 system.img
in step 20, it appears you are writing to a /bin directory on the android system. However such a directory is not visible either through shell or the system telnet account.
Do I need to understand something else about android to make sense of this.
regards
vidya
one month gone past but the op seems to be in caves or has bricked the device
STOCK ROM
CAN ANY BODY PROVIDE ME A STOCK ROM OF THIS DEVISE
I HV ROOTED SUCCESSFULLY BY A VERY EASY METHOD
BUT SCREWED UP WHILE UPDATING IT SO PLZ PLZ HELP ME OUT
THE DEVICE BOOTS BUT ALL THE APP CRASHES :crying::crying:
VR.gtmini said:
The attached image shows mt6577 Hardware, can u provide the Soc details please
Click to expand...
Click to collapse
VR.gtmini said:
one month gone past but the op seems to be in caves or has bricked the device
Click to expand...
Click to collapse
sorry to make you wait. I'm a last grader university student, and final project stuffs have got me pinned down. Hope you understand
Actually the SoC is MT8317. For some god-knows reason Mediatek have made this SoC with signatures similar to MT6577. But somehow CPU tweaker correctly detects the SoC (MT8317). Maybe it's the CPU-Z bug?
unknown_world said:
Hi, Can any one upload Lenovo ideatab A1000 system.img
Click to expand...
Click to collapse
zod0070 said:
CAN ANY BODY PROVIDE ME A STOCK ROM OF THIS DEVISE
I HV ROOTED SUCCESSFULLY BY A VERY EASY METHOD
BUT SCREWED UP WHILE UPDATING IT SO PLZ PLZ HELP ME OUT
THE DEVICE BOOTS BUT ALL THE APP CRASHES :crying::crying:
Click to expand...
Click to collapse
I'm uploading the modified .img. Let's pray my old HSPA modem won't catch fire by the morning.
vidyadhara said:
in step 20, it appears you are writing to a /bin directory on the android system. However such a directory is not visible either through shell or the system telnet account.
Do I need to understand something else about android to make sense of this.
regards
vidya
Click to expand...
Click to collapse
I think you got it wrong. The write process does not take place on the device. It's on the loop-mounted .img in /mnt/a1000 on your computer (step 18-19). Cheers!
Here's the ALREADY BUSYBOX-ED .img for Ideapad A1000-G 4GB EDGE version. Hope it helps :
www dropbox com/s/rmpnz7c285t5sqz/system.7z
sammymaddog said:
Here's the ALREADY BUSYBOX-ED .img for Ideapad A1000-G 4GB EDGE version. Hope it helps :
www.dropbox.com/s/rmpnz7c285t5sqz/system.7z
Click to expand...
Click to collapse
Thanks for coming back, could u post the MD5 of the system.7z & system.zip.
Also could u provide simple way/steps to directly flash this .img without extracting existing stock system image
My tab A1000-G
do you have stockROM for lenovo A1000G
I need this :crying:
raffly said:
do you have stockROM for lenovo A1000G
I need this :crying:
Click to expand...
Click to collapse
Don't worry, the above link is a stock Lenovo A1000 G ROM, but with pre-root files having no superuser app. Just extract the .7z file
System.7z MD5: 658CA71AC8A230B244F267513857F9A5