Does Tasker support SGY??? May I have a link of supported tasker for SGY?
Tasker v4.x DO NOT work on galaxy y.(confirmed from trial version from OFFICIAL SITE)
You need to use Tasker v.1.6 which works fine on sgy.
BTW do not post multiple threads.
Sent from my GT-S5360 using xda-app
Using CWM........Busybox Commands........No I use my hands
Related
Im running hyperion rom with savie #1 kernel.
I wanted to know if i could use smoking hal tweaks with this rom. The dev of smoking hal stated that all tweaks in init.d has to be removed. But i really like hyperion core tools. So if i flash this tweak will it conflict with the other scripts and adrenaline engine??
Also how to install merruks kernel, the one which had the capacity to overclock to 1 ghz+??
Will kak+v6 conflict with adrenaline engine??
Sent from my GT-S5360 using xda app-developers app
Just try to your experiment and share here with your experience bro, and i suggest to you before flashing the script, have make a backup first for safemodding
And, installing merruk kernel, i see any member has share how to, use search form to find your fix
And i think you can use method mai77 for installing merruk.
Sent Using My Hands with GT-S5360
Mai77 method does not work with mt deleux!! Tried it many times!! And ive tried using cwm restore but it does not flash the kernel!! It shows that it erases the boot but it doesnt!!
Sent from my GT-S5360 using xda app-developers app
I have manged to Alfa AWUS036H and TP-LINK TL-WN722N external usb adapter to work with aircrack-ng with backtrack for ARM in my Galaxy Note II ( n7100). If anyone interested have a look
an EXPERIMENTAL flashable zip for CM10.1 based rom is available at http://www.maxters.net/2013/02/aircrack-suite-for-galaxy-note-2/
Is there a chance to flash this zip on a stock rom ?
Where can I find the patches you made to the kernel?
Sent from my GT-N7100 using xda app-developers app
Right on man. I'm hoping the bcmon guys get monitor mode working for our 4334, but until then I'll see if I can get some drivers working for my asus external thumb wireless card. Any advice appreciated.
Sent from my SCH-I605 using xda app-developers app
sbcdave said:
Right on man. I'm hoping the bcmon guys get monitor mode working for our 4334, but until then I'll see if I can get some drivers working for my asus external thumb wireless card. Any advice appreciated.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
which is your driver for adapter?
you can get it by plugging into a backtrack machine or any other linux distro and then run airmon-ng
Hello how are you?
would have the ability to install the zip in me Note n7000?
thanks
hi @nizammoidu, do you think you could make a kernel compatible with lollipop for n7100 since this only works on cm10.1 right?
hackerse7en said:
hi @nizammoidu, do you think you could make a kernel compatible with lollipop for n7100 since this only works on cm10.1 right?
Click to expand...
Click to collapse
hi , I dont use n7100 anymore . can you give which kernal are you using then I will try to compile send to you.
Hi, would this be possible for agni kernel and 4.4.4 non-cm android?
nizammoidu said:
hi , I dont use n7100 anymore . can you give which kernal are you using then I will try to compile send to you.
Click to expand...
Click to collapse
im using ivan's meller cm13 rom is it possible? if not we can use maybe a kk version or lollipop ? wich one is easier?
If you on 4.4.2 stock rom, you give the nadia kernel for 4.4.2 from maxter. It works just as great and has more precompiled usb wifi drivers on it and works perfectly with aircrack via Ubuntu and linux
Sent from my GT-N7100 using XDA Free mobile app
Anyone care to share what mod are they using for s3 mini
I have CM 10.1
Crossbreeder only
Sent from my GT-I8190 using xda app-developers app
CM 10.1,eagerly waiting for 10.2
I wonder why there arent any custom kernels?
Sent from my GT-I8190 using Tapatalk 2
yea same. i only used crossbreeder. still confuse if crossbreeder is getting along with killjoy..
Sorry,but i dont know what crossbreeder is,i am new to this phone
Sent from my GT-I8190 using Tapatalk 2
CM10.1. I tried crossbreeder but couldn't get entropy tweak to load on reboot even with alternative method so I went back to seeder.
Other than that I use greenify to hybernate apps, Juicedefender to cut off data when screen off, and init.d script for "sd read ahead"-tweak, raised to 1024kb for better sdcard read speed.
Link2SD with a second partition on external sd to link apps and save some space if needed.
tys0n said:
CM10.1. I tried crossbreeder but couldn't get entropy tweak to load on reboot even with alternative method so I went back to seeder.
Other than that I use greenify to hybernate apps, Juicedefender to cut off data when screen off, and init.d script for "sd read ahead"-tweak, raised to 1024kb for better sdcard read speed.
Link2SD with a second partition on external sd to link apps and save some space if needed.
Click to expand...
Click to collapse
Tried seeder but im not sure what is is for. Hahah!
Sent from my GT-I8190 using xda app-developers app
b2dj said:
Anyone care to share what mod are they using for s3 mini
I have CM 10.1
Crossbreeder only
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Killjoy works ok with Crossbreeder, but you have to choose what entropy mode to use
b2dj said:
Anyone care to share what mod are they using for s3 mini
I have CM 10.1
Crossbreeder only
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
im on AOKP, using killjoy and greenify
i experience more UI lag with the same apps/mods used in CM10.1
b2dj said:
yea same. i only used crossbreeder. still confuse if crossbreeder is getting along with killjoy..
Click to expand...
Click to collapse
tys0n said:
CM10.1. I tried crossbreeder but couldn't get entropy tweak to load on reboot even with alternative method so I went back to seeder.
Other than that I use greenify to hybernate apps, Juicedefender to cut off data when screen off, and init.d script for "sd read ahead"-tweak, raised to 1024kb for better sdcard read speed.
Link2SD with a second partition on external sd to link apps and save some space if needed.
Click to expand...
Click to collapse
schismata said:
Killjoy works ok with Crossbreeder, but you have to choose what entropy mode to use
Click to expand...
Click to collapse
i think killjoy works with crossbreeder but killjoy disables entropy from crossbreeder so you would have to enable entropy from killjoy instead
AssToast said:
im on AOKP, using killjoy and greenify
i experience more UI lag with the same apps/mods used in CM10.1
i think killjoy works with crossbreeder but killjoy disables entropy from crossbreeder so you would have to enable entropy from killjoy instead
Click to expand...
Click to collapse
I just hope someone would make a custom kernel for us.
Sent from my GT-I8190 using xda app-developers app
b2dj said:
I just hope someone would make a custom kernel for us.
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Custom kernel for what?
Anyway, i tested crossbreeder and killjoy, you just need to enable entropy from killjoy
Dmodv6 rom and Adrenaline Engine mod,Crossbreeder mod,Thunderbolt mod.It's perfect.
How to apply Merruk Technology? cant understand, it has so many boot.tar, help me please
Sent from my GT-S5360 using Calculator
mohsen01 said:
How to apply Merruk Technology? cant understand, it has so many boot.tar, help me please
Sent from my GT-S5360 using Calculator
Click to expand...
Click to collapse
Go here
It is easiest way I have ever found and used.
Please search before you post
Sent from my GT-S5360 Gadget of Mass Destruction using xda-app
Using CWM........Busybox Commands........No I use my hands
hnkotnis said:
Go here
It is easiest way I have ever found and used.
Please search before you post
Sent from my GT-S5360 Gadget of Mass Destruction using xda-app
Using CWM........Busybox Commands........No I use my hands
Click to expand...
Click to collapse
Is it Compatible on H9 Golden Master Final Build?
Should be...
You mean the Kernel? I installed it a while ago. But i reverted back to stock coz it reboots randomly. I used only CWM in the process.
Thanks!
Sent From My Samsung Galaxy Y s5360
Any way Merrick isn't stable kernel, if you want over clock use Jarvis kernel
Sent from my GT-S5360 using Tapatalk 2
Try this kernel. it is Overclocked to 1.2GHZ. just simply flash it.
http://www.mediafire.com/download/r3kxg1dulj3l7jc/Jarvis+Kernel+v2.2.zip
Hellllloooooooo developrs.
Is it possible tooo have otg support for our galxy grand duo's.
If s someone plzzzz try to addd in kernel v alll really misss a lotttt thnxxxxx in advnceeee
Sent from my GT-I9082 using XDA Free mobile app