Database Users

[Q] TWRP nor CWM will successfully wipe/format data

First, I searched and read all relevant threads concerning this issue. The five threads that showed up in the search did not help me solve my issue.
So on to my problem. I can no longer flash any rom onto my device. I attempted to flash the first official CM10 nightly (which I recently found out was not flashing properly for others) and had no success. I simply got a black screen and nothing more. I eventually got back into TWRP (v2.2.1.4) to try and Nandroid restore, but I noticed that /data was not formatting and the restore failed. Every time I would slide the bar across to confirm the restore TWRP would reboot itself. I then flashed CWM (v6.0.1.0) and the same problems were there. After that I flashed an earlier version of TWRP and successfully restored the backup. I'm not 100% sure how it was successful. So I decided to try flashing another ROM and no go. Same problems. Anyone have any ideas? When I was using CWM I got the error message below.
Code:
E: unable to locate volume information
E: unable to open ums lunfile '/sys/devices/platform/usb_mass_storage/lun0/file'
E: unable to format data
I'm running Bugless Beast with Motley #219

I'm having similar, if not identical problems. After flashing TWRP 2.2.1.4, I tried flashing a rom and gapps; the tablet would boot endlessly into recovery. Nothing I did would do anything, so I flashed the stock image to start over. This time, I used CWM 6.0.1.0 touch to make sure that it wasn't the recovery that was causing the problem. However, now after flashing the rom and gapps, instead of booting into recovery, I got stuck at a black screen and had to hold the power button in order to get back to the bootloader.
Now, like you, it seems I can't flash any roms anymore. It's frustrating to say the least.
Sent from my Galaxy Nexus using xda app-developers app

aznxk3vi17 said:
I'm having similar, if not identical problems. After flashing TWRP 2.2.1.4, I tried flashing a rom and gapps; the tablet would boot endlessly into recovery. Nothing I did would do anything, so I flashed the stock image to start over. This time, I used CWM 6.0.1.0 touch to make sure that it wasn't the recovery that was causing the problem. However, now after flashing the rom and gapps, instead of booting into recovery, I got stuck at a black screen and had to hold the power button in order to get back to the bootloader.
Now, like you, it seems I can't flash any roms anymore. It's frustrating to say the least.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
What rom did you attempt to flash?

elementur said:
What rom did you attempt to flash?
Click to expand...
Click to collapse
So do I.I attempted to flash the first official CM10 8.18 nightly and had no success. I just got a black screen.Even more I boot into bootloader and choose to boot into recover but just stay at google logo.I try to flash recover once more,but just can't boot into recover!!

I have the same problem, i flashed the cm10 nightly which I learned would not boot. No I have no backup to boot to, and cannot even push a new rom to the storage to try to install.

Shano56 said:
I have the same problem, i flashed the cm10 nightly which I learned would not boot. No I have no backup to boot to, and cannot even push a new rom to the storage to try to install.
Click to expand...
Click to collapse
Can't boot into recover,does anyone know what is wrong?When it is in android I can use APM boot into recover or via ADB,but unusually when it is in the bootloader I choose to boot into recover,it just stay at google logo!!What it is going wrong?

phiracle said:
Can't boot into recover,does anyone know what is wrong?When it is in android I can use APM boot into recover or via ADB,but unusually when it is in the bootloader I choose to boot into recover,it just stay at google logo!!What it is going wrong?
Click to expand...
Click to collapse
There is a bug with the Nexus 7 where you cannot access the recovery through the bootloader. To fix this, boot up into the bootloader on your nexus 7 and, without doing anything, plug it into the computer you used for rooting it and then select the option Restart bootloader and press the power button. Once it gets you back into the bootloader again select Recovery mode and press the power button. It will now get you into the recovery and once you're in recovery you can unplug your tablet from the computer. Note that this fix is not permanent and you will have to do this every time you wish to access your recovery via the bootloader (and this problem is not relevant to the OP's problem).

android1234567 said:
There is a bug with the Nexus 7 where you cannot access the recovery through the bootloader. To fix this, boot up into the bootloader on your nexus 7 and, without doing anything, plug it into the computer you used for rooting it and then select the option Restart bootloader and press the power button. Once it gets you back into the bootloader again select Recovery mode and press the power button. It will now get you into the recovery and once you're in recovery you can unplug your tablet from the computer. Note that this fix is not permanent and you will have to do this every time you wish to access your recovery via the bootloader (and this problem is not relevant to the OP's problem).
Click to expand...
Click to collapse
Thank You Very Much!!!

I am having much the same problem as the OP. I finally rooted my Nexus 7 using WugFresh's Nexus Root Toolkit. It seemed all went well. I chose to use TWRP in a first attempt to install a ROM (I was on rooted stock), and following the instructions for installing my chosen ROM I went into it to wipe cache, Dalvic Cache and data. Both cache and dalvic cache wiped without issue, but when I attempted to wipe /data TWRP simply reported that it failed. With that failing, I did not attempt to install a rom. I was still able to boot out of recovery, but even with repeated attempts wiping data always failed. Is any one aware of any solution or have any suggestions. Thank you!

Cannot enter recovery

My phone originally was using omega rom and philz recovery. I accidentally pressed the "remove recovery flash" while in philz recovery when I was trying to reboot the phone. My phone couldn't boot to os nor recovery, but download mode still works. So I tried to flash custom recovery again but it does not work. Tried flashing stock rom and kernel but recovery does not work. However, the phone is now able to boot to os but the screen color gone wrong. The whole screen is purple-ish when in os.
How can I get back recovery and also solve the purple problem?

Maybe try using a different recovery, at least to get back to stable? I've used TWRP and OUDHS via Odin, and both work well.

jejb said:
Maybe try using a different recovery, at least to get back to stable? I've used TWRP and OUDHS via Odin, and both work well.
Click to expand...
Click to collapse
Thanks alot! Finally able to enter recovery. Spent quite a long time trying to flash different roms etc.
Now trying to solve the purple problem....
Edit: Everything working fine now.

After cyanogen factory reset, phone does not start even on recovery mode

Hi,
I have Samsung Galaxy S4 I9500.
I installed Cyanogen latest nightly build. Cyanogen worked perfect. I reset to factory settings from Cyanogen's settings. But after that:
- I can not open the phone's recovery (volumeup + home +power)
- I can not start operating system.
On both theese actions "Samsung" logo appears for 3 seconds, but after nothing is happening. Black screen stucks.
I look from eclipse logcat's, there is no log from phone. because OS did not started.
I tried to re-install clockwork (exatly with same files), but did not changed anything. I am not getting errors or even warning.
I will be happy if you can help me.
Thank you

Are you able to get into download mode (volume down, home, power)? If so, flash a stock ROM using Odin. If the S4 works after flashing the stock ROM, install TWRP recovery and then install Cyanogenmod.
P. S. You want to install TWRP as Clockworkmod is no longer being updated.

Hi,
had the problem of not getting into recovery at all randomly. Shutting down the phone, removing the battery and leaving the phone untouched for about half an hour helped me to enter recovery.
Regards

Mr.Brick said:
Hi,
had the problem of not getting into recovery at all randomly. Shutting down the phone, removing the battery and leaving the phone untouched for about half an hour helped me to enter recovery.
Regards
Click to expand...
Click to collapse
Hi,
I try these: I wait for 1 night by putting out the battery, also I restart the phone million times. But nothing changed.

Strephon Alkhalikoi said:
Are you able to get into download mode (volume down, home, power)? If so, flash a stock ROM using Odin. If the S4 works after flashing the stock ROM, install TWRP recovery and then install Cyanogenmod.
P. S. You want to install TWRP as Clockworkmod is no longer being updated.
Click to expand...
Click to collapse
I did not try to install different recovery software. Because Clockworkmod is already worked for the first time.
I will try to install other recovery softwares and I will write the results here.
Thank you

marka_yirmi said:
I did not try to install different recovery software. Because Clockworkmod is already worked for the first time.
I will try to install other recovery softwares and I will write the results here.
Thank you
Click to expand...
Click to collapse
I solve my problem by installing TWRP recovery. I could not understand how Clockworkmod stoped to work itself by doing nothing.
Thank you for your interest.

Clockworkmod is no longer maintained and doesn't recognize some coding in recent updater scripts included with ROMs. That is why it fails while TWRP succeeds.

HELP! Phone stuck in boot cycle, cannot flash rom

Hi everyone! Surfed the forums in the past for some minor help but never needed to register till now. I've tried everything and can't get my phone to boot.
So last night while camping my phone started boot cycling out of nowhere. I let it try a few times and then removed the battery and went to sleep. This morning I woke up and tried a few more times, replaced the battery with a non-stock double-capacity one I have, and still cycled. Sometimes it restarts on the Galaxy Note 4 logo, and sometimes on the Sprint logo. It will do this indefinitely. At one point It finally booted and said it was updating apps (like from an Android update, not the regular app updates.) Before I could do anything else with it though, the battery wiggled loose and it started power cycling again. Because of this one boot I think the root cause is related to an Android update that decided to run without my permission.
So I gave up and drove hoe from camping. Tonight I had tried everything I could find from factory reset to the toolkit to Odin and nothing has had any effect. The toolkit didn't see the device, and Odin failed to flash. Can anyone help me? I can boot to recovery and I can get into download mode, but nothing seems to work. The phone isn't hard bricked, but everything I can find on soft brick solutions hasn't worked. Thanks in advance!
~Evan

Oh also, when I boot into recovery mode it says "installing system update" with the android open chest logo, and then goes to a dead android and says "no command" before getting into the recovery mode menu.

ekuest said:
Oh also, when I boot into recovery mode it says "installing system update" with the android open chest logo, and then goes to a dead android and says "no command" before getting into the recovery mode menu.
Click to expand...
Click to collapse
If you able to go download mode then flash twrp recovery in odin and go to twrp recovery for your specific model and do clean wipe system then flash any rom for your model.then wait 10 to 15 minuts until phone boot.

Trex888 said:
If you able to go download mode then flash twrp recovery in odin and go to twrp recovery for your specific model and do clean wipe system then flash any rom for your model.then wait 10 to 15 minuts until phone boot.
Click to expand...
Click to collapse
Ok thanks that worked! I got into TWRP by setting Odin to not reboot. If I let it reboot then it just restarted after the TWRP flash and kept power cycling like before. If I uncheck auto reboot in Odin then after the flash I can pull the battery (can't figure out any other way to turn the phone off) and then when I restart in recovery mode it goes into TWRP. From there I tried a factory reset (wipe data, cache, and dalvik) and that didnt fix the power cycling. Do I have to flash TWRP and then immediately flash a rom right after? Or should I try an advance wipe in TWR, or maybe "repair or change file system" from the advanced wipe menu?

Bump? I still can't boot my phone. Got into TWRP but no idea what to do from there. I can't flash any rom successfully in Odin and I can't get the phone to boot. Now it just hangs on the "Samsung Galaxy Note 4" splash screen, doesnt even go to the "Samsung" screen or the "Sprint" screen like it used to.

Trex888 said:
If you able to go download mode then flash twrp recovery in odin and go to twrp recovery for your specific model and do clean wipe system then flash any rom for your model.then wait 10 to 15 minuts until phone boot.
Click to expand...
Click to collapse
how do you do the "then flash any rom" part? i have no idea how to do that since Odin doesn't seem to work.

ekuest said:
how do you do the "then flash any rom" part? i have no idea how to do that since Odin doesn't seem to work.
Click to expand...
Click to collapse
1,Flash twrp recovery in odin
2,press volume up+home+power button and boot into twrp
3,in twrp go to wipe/advance wipe and wipe system/cache/data/dalvik cache
4,Flash any custom rom for your model from twrp recovery
If you allready have twrp installed then skip 1 and download any rom like cm12 and gapps
Then flash from twrp

Trex888 said:
1,Flash twrp recovery in odin
2,press volume up+home+power button and boot into twrp
3,in twrp go to wipe/advance wipe and wipe system/cache/data/dalvik cache
4,Flash any custom rom for your model from twrp recovery
If you allready have twrp installed then skip 1 and download any rom like cm12 and gapps
Then flash from twrp
Click to expand...
Click to collapse
Do I just go to install in TWRP and then select the zip file on my microSD card? I tried that with N910PVPU3BOF5_N910PSPT3BOF5_SPR.zip and if says "Could not find 'META-INF/com/google/android/update-binary' in the zip file. Error installing zip file '/external_sd/N910PVPU3BOF5_N910PSPT3BOF5_SPR.zip'" Then I tried with a CM called cm-12.1-20161016-NIGHTLY-trltespr.zip and it seemed to work, and showed a little blue android face but then it still wouldnt boot. Now when I try to start the phone it says "KERNEL IS NOT SEANDROID ENFORCING Set Warranty Bit: Kernel" in tiny text on the top right of the Galaxy Note 4 splash screen, then boots to the blue android face and then powers off after about 2 seconds. After that, I cant even recovery boot the phone until I remove and reinstall the battery. Then the same thing happens, boot to blue android face and then shut down. I'll try some more android zips I found but I think there is a deeper problem with the phone here.

ekuest said:
Do I just go to install in TWRP and then select the zip file on my microSD card? I tried that with N910PVPU3BOF5_N910PSPT3BOF5_SPR.zip and if says "Could not find 'META-INF/com/google/android/update-binary' in the zip file. Error installing zip file '/external_sd/N910PVPU3BOF5_N910PSPT3BOF5_SPR.zip'" Then I tried with a CM called cm-12.1-20161016-NIGHTLY-trltespr.zip and it seemed to work, and showed a little blue android face but then it still wouldnt boot. Now when I try to start the phone it says "KERNEL IS NOT SEANDROID ENFORCING Set Warranty Bit: Kernel" in tiny text on the top right of the Galaxy Note 4 splash screen, then boots to the blue android face and then powers off after about 2 seconds. After that, I cant even recovery boot the phone until I remove and reinstall the battery. Then the same thing happens, boot to blue android face and then shut down. I'll try some more android zips I found but I think there is a deeper problem with the phone here.
Click to expand...
Click to collapse
Which android version you ware running last time before this issues start happning ? 5.1.1 or 6.0.1 ?
And i think you are trying to flash firmware file from twrp thats not possible you will require a custom rom.
If you are on 5.1.1 then try any lojjipop n910p based roms like cm 12
If you are on 6.0.1 then try n910p marshmallow based rom like cm13

Trex888 said:
Which android version you ware running last time before this issues start happning ? 5.1.1 or 6.0.1 ?
And i think you are trying to flash firmware file from twrp thats not possible you will require a custom rom.
If you are on 5.1.1 then try any lojjipop n910p based roms like cm 12
If you are on 6.0.1 then try n910p marshmallow based rom like cm13
Click to expand...
Click to collapse
I always run the updates so I'm pretty sure I was on 6.0.1. I tried again with CM13 with and without GApps and same thing always happens. No matter what I do, the phone always hangs and shuts off when it gets to the CM splash screen. I will upload a video soon. Do you know why the phone says that SEANDROID thing?
I am using CM13 from here: https://www.androidfilehost.com/?w=files&flid=44727
I am using GApps from here: http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico

ekuest said:
I always run the updates so I'm pretty sure I was on 6.0.1. I tried again with CM13 with and without GApps and same thing always happens. No matter what I do, the phone always hangs and shuts off when it gets to the CM splash screen. I will upload a video soon. Do you know why the phone says that SEANDROID thing?
I am using CM13 from here: https://www.androidfilehost.com/?w=files&flid=44727
I am using GApps from here: http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico
Click to expand...
Click to collapse
Seandroid thing is normal if you are running custom rom. Cuz any custom comes with root and custom kernel so nothing to worry.
Did you tried another battery?
And how long did you wait to phone boot after flashing cm13 ?
Go to sprint note 4 xda forum and try different roms and be patient and wait atleast 20min to phone boot
You cannot flash cm13 without gapps and make sure gapps is for 6.0.1 marshmallow.
Once your phone boot normal go to download mode and flash 6.0.1 firmware in odin and after finish flash immediately go to stock recovery and do factory reset your phone will be normal.
Make sure your battery is not damaged maybe it is causing shut off. Issue.

Well since I can't flash CM13 with TWRP and I can't flash a stock rom with Odin, what other options do I have? Is there any way to get a bcakup file that someone else has made on their Note 4 in TWRP and try restoring from that? I've also read about ADB sideloading and another recovery called CWM or something and I don't know if those will be any different or just more failed flashes. I think the problem is deeper in the phone since it wouldn't boot with the stock rom and now it won't boot with CM13.
EDIT: Just saw your last post. I have 2 batteries, one samsung stock and one aftermarket TechOrbits double capacity. The phone does the same thing with either one so I ruled out the battery a while ago. Think there's any chance theyre both bad and I should order a new one? I don't really want to invest more money into a dead phone. I don't think I waited that long after installing CM13. I'll try it again and give it a half hour. I doubt that will change anything though.
EDIT2: Also when I go to download mode (says "ODIN MODE <HIGH SPEED>" at the top) it has some red text at the bottom I think might mean something. Does this mean anything to you or is it typical?
UDC START
SW REV CHECK FAIL : [aboot]Fused 4 > Binary 1
[1]eMMC write fail: ABOOT

Screen stuck on preparing to start.. starting app.. after flashing crdroid 6.0.1

I had rooted my phone by unlocking the bootloader using adb fastboot method, then flashing the TWRP revocery V2.8.7.0, and then flashing superSU v2.46.
After rebooting my yureka plus, and going to recovery it started cynogen recovery only, even though update cynogen recovery option was disabled.
So I flashed TWRP again and without rebooting again, just flashed crDroidAndroid-6.0.1-20160827-tomato.zip and GApps zip file from internal memory. The phone rebooted and worked fine after that..
but while playing a game the phone automatically rebooted and ever since have been stuck on Preparing to start.. Starting apps..
I had disabled the developer options because I thought it was working fine.
The phone is working behind the preparing to start screen.. I can hear the message notification and caller ringtone when someone messages or calls.
Any suggestions what I should do now? I have tried doing a factory reset from recovery but the problem persists.

khushboop said:
I had rooted my phone by unlocking the bootloader using adb fastboot method, then flashing the TWRP revocery V2.8.7.0, and then flashing superSU v2.46.
After rebooting my yureka plus, and going to recovery it started cynogen recovery only, even though update cynogen recovery option was disabled.
So I flashed TWRP again and without rebooting again, just flashed crDroidAndroid-6.0.1-20160827-tomato.zip and GApps zip file from internal memory. The phone rebooted and worked fine after that..
but while playing a game the phone automatically rebooted and ever since have been stuck on Preparing to start.. Starting apps..
I had disabled the developer options because I thought it was working fine.
The phone is working behind the preparing to start screen.. I can hear the message notification and caller ringtone when someone messages or calls.
Any suggestions what I should do now? I have tried doing a factory reset from recovery but the problem persists.
Click to expand...
Click to collapse
Try flashing it with stock rom or simple wipe the whole system and cache from twrp from advance wipe option ( but backup first ) and again flash the custom rom u used previously.

sk.shehbaz said:
Try flashing it with stock rom or simple wipe the whole system and cache from twrp from advance wipe option ( but backup first ) and again flash the custom rom u used previously.
Click to expand...
Click to collapse
It still opens in cyanogen recovery only, and there is no option for wiping dalvik cache or system. Since the usb debugging is of,f I cannot used cmd to flash twrp recovery again. By the way I still don't understand why twrp recovery is not loading.

khushboop said:
It still opens in cyanogen recovery only, and there is no option for wiping dalvik cache or system. Since the usb debugging is of,f I cannot used cmd to flash twrp recovery again. By the way I still don't understand why twrp recovery is not loading.
Click to expand...
Click to collapse
Get into fastboot and flash the stock rom via fastboot method.
I hope this guide can help u out
http://www.thetechnotriad.com/393/how-to-unbrick-yu-yureka/

sk.shehbaz said:
Get into fastboot and flash the stock rom via fastboot method.
I hope this guide can help u out
thetechnotriad.com/393/how-to-unbrick-yu-yureka/
Click to expand...
Click to collapse
Phone's hard bricked now.. even though I downloaded the flashing tools for lollipop from YUPlayGod's github page.

khushboop said:
Phone's hard bricked now.. even though I downloaded the flashing tools for lollipop from YUPlayGod's github page.
Click to expand...
Click to collapse
I still have no idea why it got bricked. So after searching on google and youtube I came across this: https://androidmtk.com/download-yu-stock-rom-for-all-models . I followed the steps and now KitKat is running except launcher is not working, instead play store open's every time I try to go to home screen. So tried the nova launcher but that still doesn't work with home button, have to open through playstore->my apps, every time. But rest is working.

sk.shehbaz said:
Get into fastboot and flash the stock rom via fastboot method.
I hope this guide can help u out
http://www.thetechnotriad.com/393/how-to-unbrick-yu-yureka/
Click to expand...
Click to collapse
dude!! i tried the above method and thankfully my phone is working now the only major problem now is whatsapp is not opening...when clicked opens for 0.01 sec and returns back to previous screen (flashes) ....please somebody help me with this. Anybody can help me, Thanks in Advance.