Database Users

MysticMoD ™ v2 Custom MoD with Timescape UI Xperia™ style for Karbonn A9

Hi Folks!!!
Finally My MysticMod™ v2 is out here live for you guys to try.
MysticMod™ v2 feature
Full Timescape UI
Sony backup and restore
Bravia Engine
XLoud music
Walkman(My own port)
Sony Contacts app
Sony Messaging app
Sony launcher
Sony Widgets full support including photo frame
Smooth
Power tweaks and boots
Super fast Rom
much more!!!!
PLZ DONOT REPORT KNOWN BUGS
Disclamer:
Quote:
By flashing this rom you take full responsibility of your actions. Neither I nor XDA will be held responsible for anything. I will not be responsibe if your phone is dead or your sd card is dead or your phone just burned up.
Instructions to install
Quote:
[#] Make a Nandroid Backup
[#] Wipe Data/Factory Reset
[#] Wipe Dalvik Cache
[#] Install Rom and Reboot
Method to take current ROM
1 Reboot into recovery, by pressing and holding power+volumeup key, till u see a red screen
2 select the option back up and restore
3 select backup
Now u have a back up of your current ROM!!!!
Download the files including the attachment and place in the Root of your SD card, that is, do not place it in any folder but keep the file just on your SDcard.
Method to Flash my MysticMoD
1 Reboot to recovery
2 wipe cache partition
3 Wipe format/factory reset data
4 Flash zip from SD card
5 choose zip file
6 Select MysticMOD from your ex SD card
7 select MysticMoDSony.zip and flash it over the beta2, the zip file is ho the attachment.
Voila!!!!
MysticMoD v2 is now all yours on your Lovely A9
DownLoad link
http://www.mediafire.com/?r393d9zdz1q7dq3
Screenshots Coming Soon!!!
Known Bugs
contacts
vanish yen phone reboot,
solution: have to make a back up to sd card and also use Sony back up and restore app to take back up
messaging app force closes when going to settings, and u can use ly 1st sim to send sms.
solution: can get the default messaging app replaced.
plz do not report these bugs, as can't manage to fix this even after 2weeks of continues research and programming!!!
for ppl who wants default messaging app flash this!!!
http://www.mediafire.com/?jk3m75nkqvzo7zz
criedt
prratha93

For ppl who wants default messaging app flash this!!!
http://www.mediafire.com/?jk3m75nkqvzo7zz
Credit
prratha93

This is to inform you guys that the ROM I have uploaded is the beta 2 version, and final version patch would be released today, 'm sorry error regretted, it was an error while uploading selected a wrong file, I will just release the final patch so dat u can flash it on this ROM 'm sorry about it
Edit
Attachment uploaded check 1st post

ausome
nxt plz add one file browser in rom :good:
HERE ARE SCREEN SHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

great work
i think this is best rom i ever have

Hi zeyan,
Good Work.. Karbonn A11 phone specs is similar to Karbonn A9. & it comes with Android 4.0. Can we port this to Karbonn A9?
Please....

hoping to see the mysticmod v3 touchviz ui soon......!!!

Waiting for next mysticmod v3
kewlest22 said:
hoping to see the mysticmod v3 touchviz ui soon......!!!
Click to expand...
Click to collapse
Please release next version bro

mysticmod v3 releasing or no??? its more than a month now....!!!

Moaning never pays out well, enjoy what you already have

All devs and researchers who are willing to Get our A9 an ICS upgrade plz come and discuss here....this is important plz help A9 users to get the best wat they deserve....
Thread:http://forum.xda-developers.com/showthread.php?t=2065533
Sent from my A9 using Tapatalk 2

Hi
zeyaan said:
Hi Folks!!!
Finally My MysticMod™ v2 is out here live for you guys to try.
MysticMod™ v2 feature
Full Timescape UI
Sony backup and restore
Bravia Engine
XLoud music
Walkman(My own port)
Sony Contacts app
Sony Messaging app
Sony launcher
Sony Widgets full support including photo frame
Smooth
Power tweaks and boots
Super fast Rom
much more!!!!
PLZ DONOT REPORT KNOWN BUGS
Disclamer:
Quote:
By flashing this rom you take full responsibility of your actions. Neither I nor XDA will be held responsible for anything. I will not be responsibe if your phone is dead or your sd card is dead or your phone just burned up.
Instructions to install
Quote:
[#] Make a Nandroid Backup
[#] Wipe Data/Factory Reset
[#] Wipe Dalvik Cache
[#] Install Rom and Reboot
Method to take current ROM
1 Reboot into recovery, by pressing and holding power+volumeup key, till u see a red screen
2 select the option back up and restore
3 select backup
Now u have a back up of your current ROM!!!!
Download the files including the attachment and place in the Root of your SD card, that is, do not place it in any folder but keep the file just on your SDcard.
Method to Flash my MysticMoD
1 Reboot to recovery
2 wipe cache partition
3 Wipe format/factory reset data
4 Flash zip from SD card
5 choose zip file
6 Select MysticMOD from your ex SD card
7 select MysticMoDSony.zip and flash it over the beta2, the zip file is ho the attachment.
Voila!!!!
MysticMoD v2 is now all yours on your Lovely A9
DownLoad link
http://www.mediafire.com/?r393d9zdz1q7dq3
Screenshots Coming Soon!!!
Known Bugs
contacts
vanish yen phone reboot,
solution: have to make a back up to sd card and also use Sony back up and restore app to take back up
messaging app force closes when going to settings, and u can use ly 1st sim to send sms.
solution: can get the default messaging app replaced.
plz do not report these bugs, as can't manage to fix this even after 2weeks of continues research and programming!!!
for ppl who wants default messaging app flash this!!!
http://www.mediafire.com/?jk3m75nkqvzo7zz
criedt
prratha93
Click to expand...
Click to collapse
Hi,
Can you please repost the link of downloading mysticmodV2 with beta2? I was not able to access any of the zip files except the one attached in this forum and after flashing that SonyMysticModv2.zip only my status bar and wallpaper got changed and the animations have become bautiful.
Please let me know the links to download the proper update file. I am eagerly waiting to try your ROM. It looks lovely :good:

hey the links are working. i checked on my friends laptop my internet has mediafire blocked seems
Sent from my A9 using xda app-developers app

Hi zeeyan any update regarding any new mod created by you for A9 i love ur mysticmod v2 its simply awesome
Sent from my A9 using xda app-developers app

jhalife said:
Hi zeeyan any update regarding any new mod created by you for A9 i love ur mysticmod v2 its simply awesome
Sent from my A9 using xda app-developers app
Click to expand...
Click to collapse
thanks for all your Love and support,but since I moved away from karbonn a9 and don't have the device I 'm no more working on mysticmod touchwiz.
its a sad announcement I understand Your expectations but It's really unfortunate.
sorry

sad news we lost one developer anywaya zeeyan ur wrk r really awesome
Zeeyan i needed ur 1 help ya. I wanted to replace framework-res.apk i created a theme with UOT kitchen but i am unable to flash it using our CWM. i get installation aborted message.
once i had tried replacing by jst cut paste but i hd encounttered boot loops dn i hd to flash update.zip.
It would be very kind of you if you can let me know how to create a flashable zip file to replace the framewrk apk.
waiting for your response
Sent from my A9 using xda app-developers app

hey zeeyan my wrk is done. i was able to create flashabke zip possibly m on a pth to become A9 dev.
Sent from my A9 using xda app-developers app

jhalife said:
hey zeeyan my wrk is done. i was able to create flashabke zip possibly m on a pth to become A9 dev.
Sent from my A9 using xda app-developers app
Click to expand...
Click to collapse
good to know that u can theme as many zip files as u wish and post on my thread so that other users use it too

OUTDATED [RECOVERY] TWRP 2.8.1.0 for HTC One 802w

OFFICIAL TWRP SUPPORT HERE:
http://forum.xda-developers.com/htc-one/development/recovery-htc-one-dual-sim-802w-802d-t2982133
TeamWin Recovery Project (TWRP) version 2.8.1.0​HTC Dual Sim 802w​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshots shown in Spanish (by me) but attached for download here is the English version​
I put together a little self-extracting Windows package that does all the job for you (includes adb, dlls & fastboot) and flashes the recovery on your phone.
Credits: INSPEKT0R @ 4pda.ru, quens @ bbs.gfan.com, Dees_Troy @ TWRP IRC, @Flyhalf205, TeamWin, Freize @ 4pda.ru
Please note that the Automatic Script erases Cache for safety. If you get into recovery straight away after flashing Cache partition won't mount until you Wipe it. This will not happen if you reboot directly into Android as it will get regenerated on start up.
Downloads: (I ONLY TESTED THIS ON MY OWN DEVICE SO TRY AT YOUR OWN RISK -- MAKE A BACKUP FIRST)
2.8.0.2 Sense: http://goo.gl/KLTZBu (unzip & run executable) - Windows
2.8.0.2 Sense: http://goo.gl/uPV9ti IMG TWRP file (for manual install, not needed if running Automatic Script)
2.8.1.0 Play: http://forum.xda-developers.com/showpost.php?p=56429709&postcount=76 IMG TWRP file (thanks to @bgcngm)
- Screenshot support! Press Power + Vol- to capture the screen.
- HTC Sense theme by Freize @ 4pda.ru
What's new in 2.8.1.0:
MTP fixes and improvements - you can now copy zips to the root of storage - thanks to _that
TrueType Font support - optional as it takes up a decent amount of space so may not be available on all devices - thanks to Tassadar
Temperature support - thanks to bigbiff
Various other bugfixes and tweaks
What's new in 2.8.0.2:
Fix a bug that caused weird graphics and touch issues
Add MTP support to recovery thanks mostly to bigbiff with a little help from Dees_Troy
Add command line capabilities - you can now execute various TWRP features via adb instead of the touchscreen
Add support for color in the console and give error, warning, and highlight lines different colors
Track backup and restore progress based on file sizes to provide a much more accurate indication of progress
Improve handling of /misc thanks to mdmower
Improve setting of time on Qualcomm devices thanks to [NUT]
Allow using images on slidervalue GUI objects thanks to Tassadar
Allow using variables and addition and subtraction in variables for easier theming
Add support for 1440x2560, 280x280, and 320x320 resolutions and update 240x240
Allow ui.xml file to include additional xml files to help break up the theme and make TWRP easier to maintain
Other minor fixes and improvements
Note: 2.7 marks the first time that we are dropping support for older devices. We are doing this because of the SELinux support needed to install 4.4 Kit Kat ROMs. The non-TWRP parts of the recovery image have to be built in at least a 4.1 tree and the kernel that is included in the recovery image has to support writing SELinux contexts. We don't own most of the devices that we support so we depend on outside testers and developers to help us update devices. In many cases we can't find someone readily. Come to #twrp on Freenode if you want to help bring your device up to date. You can tell right away if your device will support 4.4 ROMs in 2.7. Boot TWRP and press the console button (the square-ish button either in the bottom middle or upper right) to view the console output. If it doesn't say "Full SELinux support" in the console, then your device still needs some work. Help us help you.
OLD VERSIONS:
2.7.0.0b: http://goo.gl/gjY0ep (unzip & run executable) - Windows
2.7.0.0b: http://goo.gl/pfDPJ4 IMG TWRP file (for manual install, not needed if running Automatic Script)
- Supports SD Card and USB OTG
- SELinux Kernel Support
2.7.0.0a: http://goo.gl/mlb7rV (unzip & run executable) - Windows
2.7.0.0a: http://goo.gl/gY2sLq IMG TWRP file (for manual install, not needed if running Automatic Script)
- Supports SD Card and USB OTG
2.6.3.4: http://goo.gl/T0j0g2 (unzip & run executable) - Windows
- Supports SD Card and USB OTG
- Works with KitKat according to @criszz
2.6.3.3: http://goo.gl/XrFIQY (unzip & run executable) - Windows
- Supports SD Card (tested) and USB OTG (tested)
2.6.3.0: Automatic Script (unzip & run executable) - Windows
2.6.3.0: IMG TWRP file (for manual install, not needed if running Automatic Script, unzip first)
If you find yourself in TWRP with no working touch, you can use adb reboot bootloader to reboot again and flash another recovery.

Android 4.1 or 4.2?
Thanks a lot for sharing this mate, I was just wondering if you are running a 4.1 or 4.2 software?

Rukavi said:
Thanks a lot for sharing this mate, I was just wondering if you are running a 4.1 or 4.2 software?
Click to expand...
Click to collapse
I'm running MaximusHD 1.0.2, so 4.2.2.

Has anybody else tried this? Still working perfectly on my phone.

Thanks
J_M_V_S said:
Has anybody else tried this? Still working perfectly on my phone.
Click to expand...
Click to collapse
You are a star....
It worked perfectly on mine too........
Thanks a lot..............

You can flash TWRP img with the Flashify app in the Play Store. Very easy.
Sent from my GT-P7510 using XDA Premium 4 mobile app

Haha, good one, do you have dual sim One?
Sent from my HTC 802w

asim26 said:
You are a star....
It worked perfectly on mine too........
Thanks a lot..............
Click to expand...
Click to collapse
No problem. Thanks for voting.
There seems to be some people with no touch working...I wonder why? Maybe there different boards in the same 802w model?

jbh00jh said:
You can flash TWRP img with the Flashify app in the Play Store. Very easy.
Sent from my GT-P7510 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Try to do this on a HTC One 802w and let me know how it goes! :silly:

Will this work on 802d?
Sent from my EG680 using xda app-developers app

otonieru said:
Will this work on 802d?
Sent from my EG680 using xda app-developers app
Click to expand...
Click to collapse
Flash it and see. If it doesn't work you can always flash another recovery using flashboot commands.
Please report back your findings.

BRICKED HTC ONE 802w WEIBO
Hy guys,
I pretty glad that you could make it up. :cyclops:
It looks great but unfortunately didn't work for me. :crying:
Well I'm newbie so not so expert in doing all those operations.
On top, I am... French (...nobody's perfect!) and try through the language to catch your posts.
Not so easy.
Actually I have HTC One 802w (M7CDUG PVT) Weibo from China Unicom,
After many attempts I download Moonshine for S-OFF but now now I am stuck on the WEIBO logo of 1st page...
No rooting possible. called.. .er... Bricked? oui?
Damn! it was working more or less (except the Chinese apps I can't read + competition in between Google Play and HTC Market).
But at least, working great.
Situation is like having the latest Bugatti Veyron and can't shift the 3rd speed... Frustrating!
The mobile is not any more recognized when plugged to computer, Only Distiller can detect it... to end with error!
But if someone can post me a lead (at least) it would make my day or my Xmas...!!!
Meantime someone can post something, I sincerely wish you all a very Happy Time to all XDA members, Developpers, Contributors, etc.
Looking forward to reading you.
Bextonbeck

Major update!
Thanks to the TWRP support I was able to port the latest version of TWRP to the Dual Sim. So from now on I will try to keep this thread updated with the latest version when its available (and when I have time).
Please check the OP for download link.

Has anybody tested the 2.6.3.3 version?

OP Updated with TWRP 2.6.3.4

will work with KK?

criszz said:
will work with KK?
Click to expand...
Click to collapse
I can tell you that somebody tried to install KitKat using TWRP 2.6.3.4 with no success. I don't know if that means that it cannot work with it.
From what I can gather from your posts, you seem very knowledgeable, so you can just go ahead and try and if it doesn't work just flash another recovery.

J_M_V_S said:
I can tell you that somebody tried to install KitKat using TWRP 2.6.3.4 with no success. I don't know if that means that it cannot work with it.
From what I can gather from your posts, you seem very knowledgeable, so you can just go ahead and try and if it doesn't work just flash another recovery.
Click to expand...
Click to collapse
Just asked because i don't have KK yet . For now i still use Soul 20 and Philz revovery. Your TWRP is working very well on JB and that's make me to move to it along with KK updatate . Also just managed to install TWRP on my new Lenovo yoga tablet and i like-it.
Edit: just for info, your TWRP work is very apreciated on russian forums and has very good feedback.

criszz said:
Just asked because i don't have KK yet . For now i still use Soul 20 and Philz revovery. Your TWRP is working very well on JB and that's make me to move to it along with KK updatate . Also just managed to install TWRP on my new Lenovo yoga tablet and i like-it.
Edit: just for info, your TWRP work is very apreciated on russian forums and has very good feedback.
Click to expand...
Click to collapse
If you ever try it on KK please report back to update the OP.
That's great about Russian forums, a little credit would be appreciated though!

After installing TWRP 2.6.3.4 phone off charge, the phone will crash!

[uncontinued]HOWTO stock|Lenovo Yoga Tablet 8"/10"[4.2.2] + Easy KITKAT[4.4.2] ROOT!

[uncontinued]HOWTO stock|Lenovo Yoga Tablet 8"/10"[4.2.2] + Easy KITKAT[4.4.2] ROOT!
EDIT:Since my device died in my bathroom, I cannot continue the support for this thread!!!
This is a guide for restoring the stock Lenovo Yoga Tablet 8 (B6000) and Lenovo Yoga Tablet 10 (B8000) ROMs [Android 4.2.2] (not for Lenovo Yoga Tablet 10hd+)​
To root your KitKat Yoga go to the second post.[*]​
This guide is just a translation from russian Lenovo forum.
All credits belongs to them. All image - rights belongs to them too.​
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research before flashing it! YOU are choosing to make these
* modifications.
* This should be the last option, you'll do, if your device is soft-briked
* or the software
* is too damaged (from rooting etc)
*/
Russian was my native language once (now I'm living in germany and my russian "skills" are little bit lower ) And my english isn't very good too. So if yo don't understand what i mean, just ask in PM.
Versions: 4.2.2 Android for 8" and 10" Yoga Tablets (WIFI, 3G and WW_CALL)
ROM: Official Lenovo
OS: Android 4.2
Languages: Multilanguage (chinese, english, german, spanish, italian, etc
This guide works only with Windows (XP, Vista, 7, 8)
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
At first let's begin with the ROM - download itself. There are different versions of those tablets, so choose wisely
I'll post only the Android 4.2.2 versions of the rooms, if you want, you can update them by yourself with the OTA. It is because at the moment you can root the JB - version more easily. (FRAMAROOT for 4.2.2 Jelly Bean versions only!!)
You have to register on this forum for download - permissions!!
Lenovo Yoga Tablet 8":
[ROM] Yoga 8 B6000_A422_000_059_131219_WW_WIFI
[ROM] B6000_A422_000_084_140310_WW_CALL
[ROM] Yoga8_B6000_A422_000_084_140310_WW_3GDATA
Lenovo Yoga Tablet 10":
[ROM] Yoga 10 B8000_A422_000_085_140402_WW_WIFI
[ROM] Yoga 10 B8000_A422_000_084_140310_WW_3GDATA
for download click on the green button on the top right side:
1. Drivers
Click to expand...
Click to collapse
Now, whyle you are downloading the ROM, lets look at the drivers you'll need.
At first you need Lenovo USB Driver [from this site] version 1.00.11. 9,28mb
Next step youl need some other drivers and tools:
Driver for USB "download mode" [download it, unzip and place it on your desktop.
SP Flash Tool Driver Auto Installer [9,49mb] - works only with Windows ХР SP2, Windows Vista, Windows 7.
for installing unsigned drives on Windows 8, follow the guide below:
Get access to Startup Options: HOWTO - Method 2 is the easiest way for me
Once you are there (After a restart) you have to choose number 7 (Disable driver signature enforcement)
When you install unsigned driver after it, windows is allways asking you this:
- install this driver anyway
2. Install the ROM
Click to expand...
Click to collapse
What do you need:
At least 30% of battery
All Driver from above and unzipped driwer for "Download mode"
time
Now let's begin.
Install the USB driver.
Unzip The ROM and put it on your desktop.
Turn off your device and unplug it from USB (if its pluged in).
for Windows 7/Windows Vista/Windows XP: Install the SP Flash Tool Driver Auto Installer from above and jump to step 7.
go to "Device Manager (link for short guide)
now when you are in your device manager it'll be a little bit tricky. When you NOW plug in your device (it have to be turned off), a new "unknown" device will appear. It will be there only for a few seconds, so you habe to be quick. RIGHT-Click on this unknown device and then go to "Update driver" in preferences. Then choose the driver you had downloaded and unzippt on your desktop. Thats it!
Now start the FlashTool.exe, (I think which you'll find in your unzipped ROM in the "Upgrade tool" folder. And plug in your device (micro USB)).
Click on "Scatter loading" (like on the image above). Then go to your ROM (you know, on your desktop) and in folder "target_bin" choose this file: "MT6577_Android_scatter_emmc.txt" (I am nbot shure if its the same name on all ROMs, but it has to be something with "scatter" in its name.
Click on "DA DL ALL WITH Cheksum" (without it, the device wont start after flashing and you have to flash all again) you'll see it on the pictures below:
The "FAC" - file will be propably not checked.
Just choose it in your ROM folder by yourself in target_bin folder:
Click on "Firmware -> Upgrade"
Then you'll see some pink lines loading. When the lines bekame yellow, you can skip the next step.
It can be, that after the pink lines the Flash Tool will stop and nothing will happen then. If it keeps for one minute you have to unplug your device for 30 seconds and than just plug in again. NOTHING ELSE!!!
When the green lines appears, just wait till its finished. You'll see it, when the green circle appears:
Unplug your device and restart. Don't panik, its multilingual and your language will be there (for shure), just click on the rigt chinese words in the first window which appears and scroll up.
After that you can easiely update your tablet to 4.4.2 with the OTA
Happy flashing =)

Easy Root your 4.4.2 KitKat ROM
HOWTO Root your 4.4.2 ROM:​
At first you have to know, whats behind all the followigng steps.
It is not that easy to root this device with KitKat (at least at the moment).
At first you have to install an app, which uses a hack and pushs a file in /system.
next you start the installed app (which is in /system now) and with this app (Kinguser) you'll have Root rights
most users dont believe in chinese root apps. So you have to install an another Rootapp, the best is SuperSU (link ist below)
After you allow SuperSU the root rights, you can just uninstall the other two apps and enjoy the happiness of beeing rooted
Click to expand...
Click to collapse
Now let's beginn:
1. Just download and install this file: Root_genious_General.apk
2. It will install a small tool, which can root your tablet. And it installs "Kinguser"
. It will ask you, to update your ROOT(1.0.23) to ROOT (1.1.33). It will be in chinese, just chose the right button and allow to update this tool.
3. A circle will appear with "ROOT" in it. "Push" the button and magic will happen (a progress bar) An yellow window will appear, in chinese, but you'll see, if it was a success then you'll see Kinguser installed on your device. (if it don't works for the first time, just try it again)
4. After that you need to reboot your device and download and install "SuperSU" from PlayStore.
5. Install SuperSU and then Kinguser will aks you, if you will allow SuperSU root rights. Chose "Yes" and now you have the rootrights. IF IT DOESN'T you have to reboot your device several times (don't know why, I needed several reboots and then it worked)
NOTE: I don't really know why, but it seems, like Kinguser do not recognize, that it has root permissions at the first time. I had to turn off the permission in Kinguser options, restart and give Kinguser the root permissions again, than restart again. Just play a little arround with whis option of Kinguser. Somehow it will work than. I had to do the game twice, and it worked both times. But really don't know why.
6. After that you need to update your binaries in SuperSU and reboot your device.
7. Then you can uninstall both chinese APPs (Kanguser can just be uninstalled with Titanium Backup) and you are rooted then

Hi, thanks for your post !
I can't go after the number 14 :/
At the bottom of the windows there is : Searching or USB but nothing happen.
I have installed LenovoUSBDriver and SP_Flash_Tool_Driver_Auto_Installer ...
I put the inf file in C:/windows/inf ...
I have tried in FastMode Boot on the tablet but nothing.
Where is my mistake ?
PS : I'm on Windows 7 x64
Thanks in advance and sorry for my bad English !

mpatate said:
Hi, thanks for your post !
I can't go after the number 14 :/
......
I put the inf file in C:/windows/inf ...
.....
Click to expand...
Click to collapse
I am not really shure, but I think its the step 6, what caused the problem. The drivers have to be installed manually, when you are plug in your device. it's not enough to "put" them somewhere. try to do this step by step, like i tried to translate
You open your device manager, turn your device OFF, plug it then on USB and than watch, when they appears a new device. very quick (you have 1-3 seconds I think), rightclick on it and than go to "Propperties", or "options" (dont really know what there is in your language ). then "Update your drivers" and then choose the drivers manually. I hope it will help.

aluk4rd said:
I am not really shure, but I think its the step 6, what caused the problem. The drivers have to be installed manually, when you are plug in your device. it's not enough to "put" them somewhere. try to do this step by step, like i tried to translate
You open your device manager, turn your device OFF, plug it then on USB and than watch, when they appears a new device. very quick (you have 1-3 seconds I think), rightclick on it and than go to "Propperties", or "options" (dont really know what there is in your language ). then "Update your drivers" and then choose the drivers manually. I hope it will help.
Click to expand...
Click to collapse
Waou, fast reply !
This is OK now, I don't know why, I restart the tablet and the software begin the work !
Now it's reboot and I have to choose my langage, thanks for all !

mpatate said:
Waou, fast reply !
This is OK now, I don't know why, I restart the tablet and the software begin the work !
Now it's reboot and I have to choose my langage, thanks for all !
Click to expand...
Click to collapse
have a night shift right now
you are welcome!

OTA?
what is OTA? u say it for upgrade 4.2.2 to 4.4.2

VelaJuel said:
what is OTA? u say it for upgrade 4.2.2 to 4.4.2
Click to expand...
Click to collapse
OTA means Over The Air it is the way how most devices are updating via wifi.

Question
Good evening I would like to ask you to do the tempering the rom that you put should be the same as the build number of the device that I have or that does not matter does not play a role build number ???

VelaJuel said:
Good evening I would like to ask you to do the tempering the rom that you put should be the same as the build number of the device that I have or that does not matter does not play a role build number ???
Click to expand...
Click to collapse
Good evening.
as far as i know it is always a good idea to take the same build number,as you have. it can brick your device,because it could always be, that there are differences in the hardwre and also the drivers,between the builds.

aluk4rd said:
Good evening.
as far as i know it is always a good idea to take the same build number,as you have. it can brick your device,because it could always be, that there are differences in the hardwre and also the drivers,between the builds.
Click to expand...
Click to collapse
well my build number is B6000_A442_001_023_140811_ww_wifi but i can't find the same any help about were can i find it ?

VelaJuel said:
well my build number is B6000_A442_001_023_140811_ww_wifi but i can't find the same any help about were can i find it ?
Click to expand...
Click to collapse
The buildnumer is B6000, and the only other important thing is the "wifi" at the end. So take just this one:
[ROM] Yoga 8 B6000_A422_000_059_131219_WW_WIFI
All the numbers between, are just patch-versions of your b6000 wifi Tablet

aluk4rd said:
The buildnumer is B6000, and the only other important thing is the "wifi" at the end. So take just this one:
[ROM] Yoga 8 B6000_A422_000_059_131219_WW_WIFI
All the numbers between, are just patch-versions of your b6000 wifi Tablet
Click to expand...
Click to collapse
so the only metters is the b600 and the wifi at the last? the other number's don't metter?
thank you very much i will do you guide and i will tell how it goes...

VelaJuel said:
so the only metters is the b600 and the wifi at the last? the other number's don't metter?
thank you very much i will do you guide and i will tell how it goes...
Click to expand...
Click to collapse
not really important for restore your stock 4.2.2 rom
good luck

Very good work
Thank you for ur post stock work's perfect for me just dont miss any step and will work thank u again...

Somebody can help me and upoad the original product tour video from 4.4.2.are deleted after restore

hi,
i'm stuck when the green circle appeared...
i stuck for more than 20 minutes...
what should i do?
redo whole process or wait for it?

hardia said:
hi,
i'm stuck when the green circle appeared...
i stuck for more than 20 minutes...
what should i do?
redo whole process or wait for it?
Click to expand...
Click to collapse
NOOOOOOO!
green circle is good it means you are ready. close the circle, close the software, unplug your device and start it

Please Help OP
http://forum.xda-developers.com/len...3300gv-rom-t2868596/post55266101#post55266101

-Aatif- said:
Please Help OP
http://forum.xda-developers.com/len...3300gv-rom-t2868596/post55266101#post55266101
Click to expand...
Click to collapse
Hello,
I am really sorry but I jujst can answer questions for my own device but i looked arround. as far as i can see, there is no stock rom to flash. I dont know if thats you, who postet this request in russian forum, but have a look there. The site admin will look, if he can find something [LINK]. Maybe he can find some help in chinese forums. Don't know, how he handle such requests.
You have a very special device number, build just without 3g for Ukraine, as I can see there. Hope, you'll find help there.

[TOOL] WinDroid Toolkit | Unlock | Root | Flash | Install | Mi 3

Link To Main Thread
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About
The WinDroid Toolkit is a Windows program built in Visual Studio using the C# programming language that simplifies the rooting process for many Android devices. The toolkit makes it easy to unlock your bootloader, flash a custom recovery and gain permanent root. It also includes other functions such as flashing kernels, pushing files and installing apps. If you find it helpful, give me a thanks and a donation if you can. If you find a bug or have a feature request, feel free to leave a reply. Thanks!
Download
WinDroid Toolkit
Changelog
Check out this document for current and past changelogs.
Supported Devices
Check out this spreadsheet for a list of currently supported devices.
Device not supported? Make a request here!
Contribute
Check out the source code on GitHub here.
Disclaimers
Please do not post, mirror, or take credit for this toolkit or any related work without explicit permission.
I am in no way responsible for any harm, damage, nuclear fission or bee infestation that may occur to your device through the use of this toolkit.

Reserved
Reserved.

THANK YOU
Thank You for your work.
The software works like a charm and looks good too.
Its a brilliant and hassle free way to perform adb actions.

program crashes all the time
Windows 7 Pro x64

gajrut said:
program crashes all the time
Windows 7 Pro x64
Click to expand...
Click to collapse
I am using windows 10 x64 and the program works absolutely fine.
To resolve your problem try running the program as administrator.

I did run as admin

Hello, thanks for work. It will supports the linux in the future?

A bit of a Problem
Device: cancro
ROM: MOKEE v50.2
Recovery: TWRP v2.8.5
Program used: WinDroid Universal Android Toolkit v2.2
Operating System (PC): Windows 10 x64
Thank You @WindyCityRockr for developing the above mentioned Program and supporting our cancro for it.
I am able to use your program flawlessly when i am using my current ROM.
BUT
when the phone is in FASTBOOT or RECOVERY Mode even though your software recognizes my device and its state but is unable to perform any actions. After clicking on a task it says No Device Found.
I have all the ADB and Fastboot drivers required, installed on my PC.
Your help would be greatly Appreciated.

Wow it looks awesome

maybe i am a noob, but i cannot connetc with my mi3 with last smiui.
I use win 8.1, i am administrator and i have debug usb activated.....
I don't undestand....

WinDroid Universal Android Toolkit v2.3 Now Out!
I'm happy to announce that the WinDroid Universal Android Toolkit v2.3 update is now out! It includes a bunch of new features, fixes and supported devices, so check it out and let me know what you think! :fingers-crossed:
You can download it here.

WinDroid Universal Android Toolkit v2.5 Now Out!
I'm happy to announce that the WinDroid Universal Android Toolkit v2.5 update is now out! As always, let me know what you think and report any bugs you encounter! :highfive:
You can download it here.

WinDroid Toolkit v3.0 Is Now Out!
WinDroid Toolkit v3.0 has been released! It's a huge update with a material redesign, major recode and support for 43 new devices!
You can out more specific changes in the changelog here.
You can download the new update here.
All versions before v3.0 will not have their files updated anymore since I've moved from hosting on BasketBuild to Amazon S3. Please update to v3.0 to ensure you're getting the latest recovery and root files!

Can this tools used for any devices? Or only for mi 3, thx before.
Sorry case clear... First time using tapatalk going to last page.
Sent from my MI 3W using Tapatalk

LuckySiKuple said:
Can this tools used for any devices? Or only for mi 3, thx before.
Sorry case clear... First time using tapatalk going to last page.
Sent from my MI 3W using Tapatalk
Click to expand...
Click to collapse
There's a long list of manufacturers and devices in it, so yes it can be used for other devices too.

Fikshun said:
There's a long list of manufacturers and devices in it, so yes it can be used for other devices too.
Click to expand...
Click to collapse
I want to install this software, but ot said that i dont have ADB driver, "ADB DRIVERS! You are missing bla bla bla. " where i can actually dowdload it manualy, my computer doesn't have a connection, so i want to download it manualy trough my HH. Thx
Sent from my MI 3W using Tapatalk

My computer doesn't have internet connection. Can i use this tools, actualy it said "adb wrong, it missing...." And it tell me that i have to download, can i download it manualy trough my HH?
Sent from my MI 3W using Tapatalk

LuckySiKuple said:
I want to install this software, but ot said that i dont have ADB driver, "ADB DRIVERS! You are missing bla bla bla. " where i can actually dowdload it manualy, my computer doesn't have a connection, so i want to download it manualy trough my HH. Thx
Sent from my MI 3W using Tapatalk
Click to expand...
Click to collapse
yes just install minimal adb drivers, it'll still ask you to install it choose no instead.
For proper working of windroid make sure usb debugging is turned on and when your phone asks for granting permission to PC, grant it.
From the list of phones available if you choose your phone it'll give you an error happened with me, don't panic just press the drop down arrow to hide the phones list.
Now, you'll have 3 tabs choose commands tab, select reboot device if it works then you've succeeded if not then maybe install your device specific drivers.
Note that if you choose to flash any files it'll ask you to choose the file.
Hope This Helps
---------- Post added at 09:27 AM ---------- Previous post was at 09:25 AM ----------
Fikshun said:
yes just install minimal adb drivers, it'll still ask you to install it choose no instead.
For proper working of windroid make sure usb debugging is turned on and when your phone asks for granting permission to PC, grant it.
From the list of phones available if you choose your phone it'll give you an error happened with me, don't panic just press the drop down arrow to hide the phones list.
Now, you'll have 3 tabs choose commands tab, select reboot device if it works then you've succeeded if not then maybe install your device specific drivers.
Note that if you choose to flash any files it'll ask you to choose the file.
Hope This Helps
Click to expand...
Click to collapse
Edit: And you don't need to install it it's portable make sure to run it as administrator

I've installed mini adb long before try this tools, and every thing is ok, i ever flash using adb before. And all fine. But when i tried to run this tools, (with run as admin too). It said " adb . . . . missing " something like that, i forgot . and i choose no, but when i choose Xiaomi mi3 (my device) , another warning come out, but at bottom left, it writted "online".
I try to root but cant click at that option.
Sory for my bad english
Sent from my MI 3W using Tapatalk

LuckySiKuple said:
I've installed mini adb long before try this tools, and every thing is ok, i ever flash using adb before. And all fine. But when i tried to run this tools, (with run as admin too). It said " adb . . . . missing " something like that, i forgot . and i choose no, but when i choose Xiaomi mi3 (my device) , another warning come out, but at bottom left, it writted "online".
I try to root but cant click at that option.
Sory for my bad english
Sent from my MI 3W using Tapatalk
Click to expand...
Click to collapse
try using the commands tab that should work

Universal ReadBack Extractor for mtk feature watchphones

Update Mar-12/2016: as long as on the market appeared a long line of new types of mtk6260 mtk6261 mtk2502C mtk2502A (etc) watches equipped with strange new PCB or flash_ID parameters, the new release <Readback Extractor mtk 2.0> now has the capacity to identify, to read, check, rebuild firmware and collect and insert in the .cfg files the flash_ID's coded inside the ROM dump for almost all types of mtk watchphones or smartwatches based on RTOS Nucleus
NOTE: being tested already for mtk6260 mtk6261 mtk2502C and mtk2502A
In short - if you intend to install in your smartwatch new firmwares, mods etc, before to initiate any flashing with the Flash Tool app (pushing that goddamn < Download > button) think twice, 'bove all better DO a backup for the original firmware, why so? because it's containing all original drivers hence you'll be able to recover 100% your watch in case of bricking.
How to:
First you have need of a full dump of your ROM. Assuming that you already got a Flash Tool 5.15.16 and drivers, and you were at the point of flashing something (already chose the download agent and scatter file)
preparations:
a. Set options/backup and restore on no action
b. load the download agent (you find this file inside the flash tool folder)
c. load a scatter firmware - for initialization flash tool needs a scatter file (.cfg) - for dz09 you get this one - for any other than mtk6260A get here and get a firmware compatible with your PCB
d. in case you have W10 - go to the start menu and click on power and hold down the shift key while clicking on restart. A screen then comes up and you need to choose troubleshooting and then startup options. It will then reboot and give you a menu. press 7 which is ignore signed drivers and then when windows comes up, you will be able to install the drivers.
for instance let's say you have a DZ09 smartwatch:
1 - press < Readback > in upper menu and so < Add > in the middle menu
2 - click twice on the item appears in the main window, set name as ROM_DZ choose in browser the path and save
3 - set as Physical start address 0x00000000 and as Length 0x01000000 or 0x00800000 or 00400000 (try them in this order) then ok
4 - turn off the watch, press < Readback > in the middle menu wait 2 seconds and connect through USB your watch
5 - wait until the upload is complete (big green ring)
Now second stage:
1 - download the app I've built attached here (Readback Extractor mtk) and unzip it
2 - create a folder where you intend to keep in safe the original firmware and name it for instance DZ09-Orig
3 - do a copy of Readback Extractor mtk 2.0.exe and place it inside the DZ09-Orig folder then click twice on it
4 - press <Load Readback file> and browse after the ROM_DZ file created before with the Flash Tool then open
5 - Wait about a minute while the app will check bit by bit the integrity of your file
6 - If everything went ok and your file is healthy then app will show " health 100% " so you can proceed to the next step
7 - Press <Rebuild Firmware> and wait about one minute (it shows a progress counter)
8 - When appears the message " - ALL DONE!!!" close app and go back in the DZ09-Orig folder, now you'll find there a set of new files which are the original firmware kit ready to be flashed back in your phone anytime you want
9 - Enjoy flashing anything you like without any fear that something bad can happen
Some tricks for writing IMEI in your watch NVRAM:
you connect to usb your watch (turned on this time) and set the com port on the watch screen, go in device manager and check the port number your watch is connected, then you open Tera Term hyperterminal (google for this app), connect it as serial com on watch com port and then give the command:
AT + EGMR = 1, 7, " imei number "
if on screen appears OK then ready, you've changed your imei
AFTERWARDS READ ME story - Anywhere you search, there is no one to tell you explicitly how to extract from your mtk smartwatch the firmware kit
All says a halfmouth: Do a full < Readback > in Flash Tool, you'll do it being confident that from now on you say goodbye to any risk because you have A BACKUP hence you start flashing new firmwares. And the Big Brick is coming , you smile and get back to your < Readback > backup discovering that, sadly, you have a binary bulk at first sight good for nothing. It cannot be so useless, isn't it? after all it contains full dump of your ROM! I was in exactly the same situation, so 'cause I didn't find any answer I've started reverse engineering . . . and it worked, first I did it manually for guys being in the same situation, 've noticed that is a common issue so I had to choose how to help, simpler but dangerous (for you) way, to create a tutorial <how to> or the hard way (hard for me), to develop an app which will do all "cooking" automatically and I choose the second because in manually way there is a quite big "chance" to mess up with your primary bootloader which could get to a real tragedy - no modem - brickest brick you saw in your entire life
Readback extractor mtk 2.1 beta
Flash Tool and drivers

Lil to late for me XD.... *just ordered a new one btw*

franc33s said:
Lil to late for me XD.... *just ordered a new one btw*
Click to expand...
Click to collapse
Sorry man, couldn't earlier because I have mine either of two weeks or so. . . still a beginner
Look at the bright side, best lessons we learn from our own mistakes, best part is that if you buy the new one from the same seller, you'll have the firmware hence two working watches!

Are there apps in the works to change watch faces without flashing?

kyitech said:
Are there apps in the works to change watch faces without flashing?
Click to expand...
Click to collapse
Unfortunately, yet, there is no way to get in contact with the watch else than through proprietary mediatek drivers so that the only ways to communicate for now are Flash Tool app and bluetooth modem proprietary commands (the most important of them being secret as well)
To do such a reverse engineering is way way way over my pay grade
Still I'm working for an app which could replace any media in the watch (backgrounds, icons) but through flashing method of course

Thanks for the info...I just think this watch have great potential

Golem_ said:
Unfortunately, yet, there is no way to get in contact with the watch else than through proprietary mediatek drivers so that the only ways to communicate for now are Flash Tool app and bluetooth modem proprietary commands (the most important of them being secret as well)
To do such a reverse engineering is way way way over my pay grade
Still I'm working for an app which could replace any media in the watch (backgrounds, icons) but through flashing method of course
Click to expand...
Click to collapse
Sorry for not knowing, but what about bluetooth app transfer in the Google play store. How can they be used on dz09-?

kyitech said:
Sorry for not knowing, but what about bluetooth app transfer in the Google play store. How can they be used on dz09-?
Click to expand...
Click to collapse
. . . bluetooth modem AT commands, just I told this before, generally speaking, in this way all bluetooth app are working, in our case they are proprietary and most of them SECRET. For more information please check this link, it is an older tutorial posted by me on that site

franc33s said:
Lil to late for me XD.... *just ordered a new one btw*
Click to expand...
Click to collapse
I'm almost sure you found these before me, still, here link you have more than 10 versions of dz09 firmwares (others than we checked before)
It looks like they made a firmware for each phone ) very prolific guys when about dz09
Hope this time you catch the right one!

Golem_ said:
I'm almost sure you found these before me, still, here link you have more than 10 versions of dz09 firmwares (others than we checked before)
It looks like they made a firmware for each phone ) very prolific guys when about dz09
Hope this time you catch the right one!
Click to expand...
Click to collapse
yup already did try them all, they boot fine, just no luck getting the Padgene (padgeME) one yet (so my touchscreen driver would work), the guy is still uploading more firmwares tough *fingers crossed*

Golem_ is a hero!
Thanks for all the time you spend with the gt08

flashtool
Hy ,
I am trying to search for the wright flashtool to make my backup.
And where can i find a tutorial?
I have a gv08s.
Wich drivers do i need, and wich version of flashtool?
Thanks in advance

xeph20 said:
Golem_ is a hero!
Thanks for all the time you spend with the gt08
Click to expand...
Click to collapse
thank you for kind words!

Golem_ said:
thank you for kind words!
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

carlospaco said:
Hy ,
I am trying to search for the wright flashtool to make my backup.
And where can i find a tutorial?
I have a gv08s.
Wich drivers do i need, and wich version of flashtool?
Thanks in advance
Click to expand...
Click to collapse
here link you find a good tutorial but instead <download> you have to use <readback>

Golem_ said:
here link you find a good tutorial but instead <download> you have to use <readback>
Click to expand...
Click to collapse
Yes , i have done everything like its said, for couple off days, but i keep getting this error always.
lashtool error: S_BROM_DOWNLOAD_EPP_FAIL (2036)
[EPP] FlashTool environment preparation failed
It May be caused from DRAM initialization failed
Pleace check the EMI information of the MAUI load is correct and fit the target.
Hope that someone can help me with this, i am desperated.
Thanks

carlospaco said:
Yes , i have done everything like its said, for couple off days, but i keep getting this error always.
lashtool error: S_BROM_DOWNLOAD_EPP_FAIL (2036)
[EPP] FlashTool environment preparation failed
It May be caused from DRAM initialization failed
Pleace check the EMI information of the MAUI load is correct and fit the target.
Hope that someone can help me with this, i am desperated.
Thanks
Click to expand...
Click to collapse
give me in PM a skype ID

Golem_ said:
give me in PM a skype ID
Click to expand...
Click to collapse
Oh, i am sorry, but i don't have a skype id.

carlospaco said:
Oh, i am sorry, but i don't have a skype id.
Click to expand...
Click to collapse
Alternatives for live screen sharing like, for instance TeamViewer?

Golem_ said:
Alternatives for live screen sharing like, for instance TeamViewer?
Click to expand...
Click to collapse
i have send you id teamviewer