Database Users

[HOWTO] Flawless bell update

WELCOME
to the WINDOWS Bell Atrix 0.37.4 update guide on how to go from 2.2.1 to 2.2.2! (without problems )
===================================================================================================================================================
WARNING
Do not attempt any of these steps if you are on an international firmware. You will probably brick your phone. This guide was made to help people who are having trouble updating from 0.37.4 to the new bell 2.2.2.
Bell users:
Please note that flashing files to your phone and modifying system contents can brick your phone. However, the method I am sharing worked flawlessly for myself and others.
Before beginning:
You need root access on your phone. If you are not sure what root access is, you shouldn't be having problems updating, because you wouldn't have modified system files. Regardless, here is a thread on how to root a bell atrix.
Guide:
Step 1:
Download Titanium Backup from android marketplace, and back up all of your apps and games. This is necessary only if you want to have an easy reinstall of most of your apps and games, as we will be wiping data off of the phone. (if you have another backup program, it should work just fine. Make sure it saves the backup to a folder that you can copy onto your computer)
Step 2:
Remove the external microsd card from your phone (if you have one). This is simply for safety purposes, as we don't want any data being wiped off of this (we don't need the microsd any time during the process).
Now, copy (or cut) all of the data from your internal storage to your computer, just in case, and we are about to wipe data off of your phone.
Step 3:
Format your phone. This can be done two different ways.
The first method is the simplest:
Menu -> Settings -> Privacy -> Factory Data Reset.
The second method (if for some reason you can't do the first) is:
Turn off your phone. Turn it back on while holding the volume down key. It will show the word FastBoot. Keep pressing the volume down key until you reach android recovery. Press the volume up key. Wait patiently. Once a little man appears, there should be a menu. If there isn't, press both the bottom left and bottom right corners of the screen simultaneously. That should bring up the menu. (give it a few tries, it takes me 8-10 lol). From this menu, press volume down until you get to wipe data, then press ok on the bottom left corner (give this a few tries too).
Step 4:
Your phone should now be acting like you just bought it. It should, upon reboot, prompt you to enter your country.. etc. Make sure you either use your existing motoblur account, or create a new one. It is just important for you to have a blur account for the update process (my phone gave me hell when I didn't have one). Do what is necessary to get your phone up and running again.
Step 5:
This is where the fun begins. Reroot your phone usinggladroot(or any other root method you know how to use). Download Superuser, install it, then download Root Checker from android marketplace to confirm root access. Whenever a Superuser popup comes up, confirm / say yes (and make sure the remember box is checked).
Once you have confirmed root access, proceed to the next step.
Step 6:
Download Tenfar's CWM recovery, and install the apk on your phone. Follow the instructions inside of the app to install recovery and enable recovery mode.
Step 7:
Download these two files, and put them in the root of your internal storage. (By root, I mean in the very first directory, ie. F:/put file here)
http://dl.dropbox.com/u/23800522/Blur_Version.0.37.4.MB860.BellMobility.en.CA.zip
http://dl.dropbox.com/u/23800522/Blur_Version.0.37.4.MB860.BellMobility.en.CA.crc
Step 8:
We are now ready to start fixing up the phone, and preparing it for the update.
First of all, we need to make sure ADB (the program we will be using on our computer) has root access on our atrix when it is plugged into our computer via usb.
Before plugging in your atrix via usb, enable USB debugging via:
Menu-> Settings-> Applications -> Development -> Check USB Debugging.
Now plug the atrix into your computer, and set the USB connection to: None. Check to make sure USB Debugging is in your notification bar.
Download these files onto your computer if you do not have the adb files yet. Extract the files preferably into the root of your hard drive (ie C:/ ) is just makes things easier this way.
Now open up command prompt.
If it is not in the directory where the adb.exe file is, you will need to type:
cd C:/
into command prompt. This says "change directory to C:/" (or wherever you put the files, could be cd C:/Program Files/ could be anywhere. wherever you extracted them to.)
Once in this new directory, type this into command prompt and press enter:
adb devices
If a device pops up (mine said TY290380 or something like that) that means that it recognizes your atrix. That is great news. We now have to enable ADB root access on the phone.
If nothing pops up, or it says some sort of error, you are not in the directory where adb.exe is located. Navigate to the proper directory.
Now, type the following command:
adb shell
One of two things can happen here. It will either create a new line with a $, or a new like with a #.
blah blah C:/ adb shell
$
or
blah blah C:/ adb shell
#
If a $ came up, you need to prepare a command BUT DONT PRESS ENTER YET. Type in "su", but dont hit enter. Now go to your phone and unlock your screen. After you unlock your screen and can see your homepages, press enter on your keyboard doing the "su" command. Now look at your phone. A superuser request should appear. Hit yes, and make sure that "remember" is checked. If not, it is ok, as long as the su command went through on your screen. it should now show a # on your command line.
For those of you who had a # on your command line, type in shsu and hit enter, then type in su and hit enter (just to play it safe ).
We are now ready to flash the first files to our device. You can close the command window.
Step 9:
Download this file. It is the original unmodified system partitions and files (thank you NFHimself). Extract the file using winrar or 7zip.
Change your USB connection on your phone to: Mass Storage, wait a minute or so, and then put the extracted file "mmcblk0p12.bin" in your internal storage on your phone. (ie. F:/ )
Step 10:
Dismount the phone from your usb devices via windows hardware manager. Unplug your atrix from your usb. Reconnect it, and choose connection type: none. Make sure usb debugging is in your notification bar.
Now, re-open command prompt. Renavigate to the directory where your adb files are located using the "cd C:/" command (or wherever your files are). Once there, perform "adb devices". Make sure a device is there. Next, perform the command "adb shell". You should have a #. Type in shsu, hit enter, now su, hit enter (just to be sure).
Now copy this command and hit enter (you have to right click paste into cmd prompt):
dd if=/sdcard/mmcblk0p12.bin of=/dev/block/mmcblk0p12
This will begin the flashing process, which will restore all stock system partitions allowing us to update properly. However, it's not over yet .
Mine took a few mins, do not panic. Simply wait for it to say "Complete" in x amount of seconds or whatever. Your phone may crash, but it should boot up fine (if not, that is why we have installed Tenfar's CWM )
After it is complete, turn off your phone. Keep it connected to the computer.
Step 11:
Boot up your phone holding volume down. Navigate to android recovery using volume down. Volume up. Open up the menu with the bottom left bottom right press. Go to clear cache. Press OK. Now reboot your phone.
You can now update through settings and it should work properly. If not, respond in here and I will guide you a few more codes, but it should work.
The phone should now boot up, and it should be running android version 2.2.2.
Regard this thread for how to root the new bell update. Just a heads up, it wiped my internal storage and SD card, so remove and backup that stuff. Lol. But it did root.
Now reinstall your backup program, and get your phone going again!
If you have any questions or problems please post them here and I will reply ASAP, personal messages are hard to keep track of. Thanks again to NFHimself for supplying files and code.
Cheers!
PS: I just finished exams, yay!?
Please say if you notice anything misspelled, etc. Gratzi

You are the f***in man for posting this. Thumbs up to NFHimself for his contribution too!

Links
Crud, your links for the files in dropbox aren't working.

Silvercloak5098 said:
Crud, your links for the files in dropbox aren't working.
Click to expand...
Click to collapse
You sure? I clicked them both myself to make sure they work.
How don't they work?
FYI: I'm reuploading them to megaupload as we speak anyways

IrshaadH said:
You are the f***in man for posting this. Thumbs up to NFHimself for his contribution too!
Click to expand...
Click to collapse
When I got my phone to update to 2.2.2 it felt amazing.
I just wanted to spread the love

Thank you so much!! You don't know how frustrated I've been all day! The only problem I had was that my root was gone after I flashed it, but I just updated through settings and it worked flawlessly

tyrkk said:
Thank you so much!! You don't know how frustrated I've been all day! The only problem I had was that my root was gone after I flashed it, but I just updated through settings and it worked flawlessly
Click to expand...
Click to collapse
NP! Just glad you got your update.
I changed the steps so that the last step is simply updating via settings. If that doesn't work for people I will help them out in this thread with the more complicated coding way.
Cheers!

Couldn't step ten be used to revert to stock from an international sbf?
Sent from my MB860 using XDA App

Ok..quick question. You said not to install for those using any international version. I have run the Telstra sbf at one point..as well as had the Greyblur rom on. Before installing the Telstra I had made a backup using CWM, and a few days ago I had to revert to my old backup due to a rogue app. In my About phone, it tells me my System version is Blur_Vision.0.37.4MB860.BellMobility.en.CA with a Build number of OLYA_U4_0.37.4.
Would this be still safe for me to do seeing's how it seems i'm back to my "Bell sbf" or is there still going to be some Telstra files in there that could cause me some problems?

I made it through to the end of step 10 and the phone was looking good. Then when I shut off the phone and tried to go into Android Recovery, it keeps going to the triangle symbol and I have to reboot.
After a couple times of that I decided to check Android Recovery from inside the app list and it said I no longer have root access.
Any ideas what to do now??

Rickroller said:
Ok..quick question. You said not to install for those using any international version. I have run the Telstra sbf at one point..as well as had the Greyblur rom on. Before installing the Telstra I had made a backup using CWM, and a few days ago I had to revert to my old backup due to a rogue app. In my About phone, it tells me my System version is Blur_Vision.0.37.4MB860.BellMobility.en.CA with a Build number of OLYA_U4_0.37.4.
Would this be still safe for me to do seeing's how it seems i'm back to my "Bell sbf" or is there still going to be some Telstra files in there that could cause me some problems?
Click to expand...
Click to collapse
Depends on whether or not you're still on the telestra framework. If you're confident with your ability to recover from a potential brick via early usb enumeration id go for it.

bdking2 said:
I made it through to the end of step 10 and the phone was looking good. Then when I shut off the phone and tried to go into Android Recovery, it keeps going to the triangle symbol and I have to reboot.
After a couple times of that I decided to check Android Recovery from inside the app list and it said I no longer have root access.
Any ideas what to do now??
Click to expand...
Click to collapse
Edit: See my lower post first, then this one
Open up the menu in android recovery by tapping both the bottom left corner and bottom right corner of the screen at the same time.
It should show you an error if there was one.
Does the phone boot fine?
You should lose root access. When you flash the .bin it restores your bell to stock like you got it from the store. That allows you to update.
Most importantly open up the recovery menu when you see the triangle by tapping the bottom left and right corners simultaneously. Itll take a few tries.

IrshaadH said:
Couldn't step ten be used to revert to stock from an international sbf?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
No, since you are on an international framework it will probably brick your phone.
That .bin file contains the system partitions from the stock bell framework.
If you want to try go ahead but I think the odds are against you

bdking2 said:
I made it through to the end of step 10 and the phone was looking good. Then when I shut off the phone and tried to go into Android Recovery, it keeps going to the triangle symbol and I have to reboot.
After a couple times of that I decided to check Android Recovery from inside the app list and it said I no longer have root access.
Any ideas what to do now??
Click to expand...
Click to collapse
Bdking I have another idea. if you can boot up your phone, re-root it using any normal methods, then install CWM. Boot into CWM recovery mode and clear the cache from there. Then do step 11.
Chances are the update file is hanging out in your cache so when the android recovery sees that it immediately tries to install the messed up package.
Thats why you should clear cache on CWm because it wont try to install anything automatically from the cache. Then do step 11.
Hope it helps, Mag.

No my phone boots fine. And now I can get into android recovery to clear cache and have done so. But before I read your response I rooted my phone again.
Should I just restart everything?

bdking2 said:
No my phone boots fine. And now I can get into android recovery to clear cache and have done so. But before I read your response I rooted my phone again.
Should I just restart everything?
Click to expand...
Click to collapse
No you should be good to go try to update via settings.
You flashed the bin right?
If so you're good to go

I flashed the bin for sure. But wasn't sure about the process because I rooted again.

bdking2 said:
I flashed the bin for sure. But wasn't sure about the process because I rooted again.
Click to expand...
Click to collapse
Root shouldnt change anything only deodexing/webtop mod/ theming should mess it up.
If you flashed the bin go for it. Worst thing that can happen is that the update fails.
In that case, redo step 10, then do step 11.

Magnetox said:
No, since you are on an international framework it will probably brick your phone.
That .bin file contains the system partitions from the stock bell framework.
If you want to try go ahead but I think the odds are against you
Click to expand...
Click to collapse
So, there is absolutely NO WAY I can get back to the Bell framework from 2.1.1 without an actual Bell sbf?

IrshaadH said:
So, there is absolutely NO WAY I can get back to the Bell framework from 2.1.1 without an actual Bell sbf?
Click to expand...
Click to collapse
NFHimself knows a way.
But hes a master of code.
Pm him, he might be able to help you.
He was happy he got his bell 2.2.2 thoough. so im assuming it wasnt easy.

Root & Install CM7 on Mytouch 3G Slide 2.2.1

Rooting & Flashing To Stock 2.1
1. Download the files below
2. Copy "ESPRIMG.zip" to the root of your sd card on your phone
3. Extract "Super-Click 2.3.1" & "Mt3s Rooter" to their own folders on your computer
4. Navigate to settings on your phone. Select "Connect to Pc", choose "Charge Only"
5. Navigate to "Applications" then select "Devolpment" and make sure "USB Debugging" is on
6. Run the .exe files within each of the folders (Run .exe as Admin if your using Vista/Win7)
7. In SuperOneClick, select "Shell Root", wait for it to finish rooting
8. In the mt3gs rooter program, click on "Root Me"
You will need to turn on the phones WIFI within 30 seconds so be quick and then wait for it to restart.
9. Once your phone is rebooted it should be in BOOTLOADER Mode. Press volume down to select fastboot (If it doesnt show fastboot then select Bootloader and it will then show the menu with fastboot).
Once fastboot is highlighted, press the power button once.
It will check for ESPRIMG.zip and should show a progress bar in the top right.
After waiting a while it will ask you if you want to update, press volume up.
When it is finished it will ask to reboot, press volume up to do so. (If phone says on Mytouch circle for too long just take out the battery and restart)
If you want to put CM7 on your phone do instructions below.
Installing CM7 with Google Apps
1. Rename "update-cm-7.0.3-Slide-signed.zip" to "update.zip"
3. Copy "Update" & "gapps-gb-20110613-signed" to the root of your phone
4. Turn your phone off. Once off press and hold the volume down and power button at the same time.
5. It will look for the ESPRIMG again, after its done you will see the menu. Highlight "Recovery" and press the power button
6. A Red Triangle screen will show. Press volume up and power, then select "Wipe data/factory reset" then done do the same with "Wipe cache partition
7. After all that you will select "Apply sdcard:update.zip"
8. Select reboot system now
9. Once phone is restarted go into the app drawer and open ROM Manager.
10. Scroll down and select "Download Rom" then select install and then select the option it shows. It should say that Clockwork Mod installed.
11. Now select "Install Rom from SD Card" and select "gapps-gb-20110613-signed" and press OK twice.
It will reboot and show it installing.
Once done it will reboot again and your done. (Btw it will have you sign in and such)
DOWNLOAD THESE FILES:
SuperOneClick 2.3.1-
http://depositfiles.com/files/n0dcxce3t
Mt3s Rooter-
http://depositfiles.com/files/hn8tn6141
or
http://www.mediafire.com/?7yq3wo5yl3odz4k
HTC Espresso Stock Rom (ESPRIMG for 2.1 stock rom)-
http://www.4shared.com/file/OsmF_ZD7/ESPRIMG.html
CM7 Rom for Mytouch 3G Slide-
http://download.cyanogenmod.com/get/update-cm-7.0.3-Slide-signed.zip
Google Apps-
http://cmw.22aaf3.com/gapps/gapps-gb-20110613-signed.zip
----------------------------------------------------------------------------
MyTouch 3G Slide Drivers (These Might Help With Failed ADB Connectivity)
http://secure.htc.com/US/support/t-mobile-mytouch-3g-slide/downloads/
http://developer.android.com/sdk/win-usb.html
I pieced this together so I don't take full cred. I know this works because I did it to my phone as I typed it
If this works make sure to post it. Also remember to give thanks. This was not easy to figure out.

problem
what if it says cannot roll back bootloader while espring is updated it says bypassed

It bypasses normally

Why not use ClockWorkMod recovery as update.zip and use that to flash roms and things from there?

Just didn't wanna do it that way

thank you so much for posting this i have been trying to gain root ever since i got my phone which was last year thank you

I cant flash update.zip it keeps saying cant mount sd and when i reboot it says i dont have an sd card i need help im stuck with 2.1 and cant load a rom

not working
Didnt work for me.
superoneclick worked saying i had temporary adb root, then i would run mts rooter and it seems like that when the cmd prompt comes up that it doesnt work.
on the first part it said
"cd: can't cd to /sqlite_stmt_journals"
then after I turn wifi on and the cmd prompt goes again I get:
"./exploid not found" and " secretlol not found"
any help?

one small hiccup
Used these instructions to root a friend's phone last night. There was one deviation we had to deal with:
5. It will look for the ESPRIMG again, after its done you will see the menu. Highlight "Recovery" and press the power button
Click to expand...
Click to collapse
While we could see the menu the phone only gave us the choice to run update (YES) or reboot (NO). Recovery was inaccessible. We ran the update (with the bootloader bypassed) then when asked to reboot we chose (NO) and then could select RECOVERY and follow the steps above.
Yes, we did repeat the UPDATE.ZIP process but this time it did not skip Bootloader. Soon CM7 was up and running.
Hope this helps and thanks for the great instructions.

i need some help my says i dont have sd card when it boots up .Also it wont let me apply the update.zip .it says cant mount /dev/block/mmcblk0
cant find /sdcard/update.zip
Ive already reloaded ESPRIMG aboput 15 times im stuck with a useless phone please help
Also my pc wont recognize my phone so i cant use adb or anything

angelo420 said:
I cant flash update.zip it keeps saying cant mount sd and when i reboot it says i dont have an sd card i need help im stuck with 2.1 and cant load a rom
Click to expand...
Click to collapse
Some sd cards work better than others. Sandisk with a little 4 work great. Try to reformat it with a pc and I think it needs to be Fat32
jasonftfw said:
Didnt work for me.
superoneclick worked saying i had temporary adb root, then i would run mts rooter and it seems like that when the cmd prompt comes up that it doesnt work.
on the first part it said
"cd: can't cd to /sqlite_stmt_journals"
then after I turn wifi on and the cmd prompt goes again I get:
"./exploid not found" and " secretlol not found"
any help?
Click to expand...
Click to collapse
Your pc is not detecting your phone. Try installing HTC Sync from the Mytouch 3Gs support page. Also make sure to run it as an administrator while being logged in on a admin account

I actually rooted mine while placing the phone in SYNC Mode after removing the sync program and pressing back button on phone to have it stop looking for SYNC...Just remove SYNC program from the computer not the drivers for the phone to be recognized.

Your pc is not detecting your phone. Try installing HTC Sync from the Mytouch 3Gs support page. Also make sure to run it as an administrator while being logged in on a admin account
Click to expand...
Click to collapse
I downloaded the htc sync software from htc dot com /us/support/t-mobile-mytouch-3g-slide/downloads/ (xda's settings stop me from submitting a link as this is my first post), I then tried to rerun the SuperOneClick and it failed saying "ADB server is incorrect version" or something similar. I copied the ADB.exe from the HTC Sync app directory into the SuperOneClick, and wham bam it worked. Of course the MT3Rooter failed with the same error, so I repeated the copy and I had root.
Thanks for your help everyone, it is very appreciated by this sorta geek.
PS: As a software geek and a 42 year old jerk, it hurts my heart that XDA has to run such nasty anti-spam settings just to keep crap off this forum. Ends up penalizing the users with good intentions. I totally see why it has to be done, and I support the effort, just is sad that it has to be this way.

how do you achieve s-off though? does downgrading, also downgrade your bootloader?
the goldcard app is not working, the site is down to generate keys.

Insanityrains: I have two stupid questions. Is there something I'm missing here? You don't have consecutive numbers for your instructions. Should I follow them in the order you have posted or in the order of the numbers?
Dumb question 2: Where is the download link for the ESPRIMG.zip file?
Thanks for your instructions! I hope it works for me.
UPDATE
I followed the steps to the letter. It worked seamlessly. Thanks insanityrains for putting all this together and the developer who actually figured this out!! However, few things I had to learn by doing it over and over again:
The first part worked awesome! (i.e. rooting and installing 2.1). It will keep saying there were errors and stuff but keep doing what insanityrains says to do.
The second part (installing CM7 with google apps was the hurdle for me): Follow his numbering in post #1 (once again, I'm refering to the second part) to understand what I'm saying below.
Before you begin, you don't need the ESPRIMG file anymore once you have rooted and installed 2.1 (the first part). So delete that file from the root of your SD card. By doing this, you can skip the annoying wait as it tries to reinstall 2.1 on your phone. Now for the two mistakes I did.
1. The first step was a silly mistake, but very much possible for someone to commit. Just rename the file "update" and dont add ".zip" like I did. Everytime I try installing the ROM it kept saying "cannot locate update.zip". I was scratching my head for a few times before I realized the mistake
2. Step #5. It will search for the ESPRIMG file and it is not going to find that. Select "recovery" then
For noobs, dont freak out while doing it. It was scary for me to root the phone. But once I did it fine, it was fun!

so in order to install roms you have to rename them to update zips?

anybody even here anymore?
theres too many outdated rooting guides on here. i already know i cannot achieve s-off now that we accepted the OTA. i already tried to root and it went fine but the clockwork recovery will not work. also when i boot into the 2.1 rom that i downgraded to i see there is no superuser app but it appears i am rooted because most root apps work minus wireless tether. i just want root and to run a semi stock non cm7 type rooted rom. is this possible with s-on or not?
if so can someone point me in the right direction please?

Worked!!!
Thanks insanityrains. Followed the steps and it worked. I would echo comments re: Menu choice for "Recovery" (see updates with fezmonger and ganjagarn).
Again - thanks!

fixxxer2008 said:
anybody even here anymore?
theres too many outdated rooting guides on here. i already know i cannot achieve s-off now that we accepted the OTA. i already tried to root and it went fine but the clockwork recovery will not work. also when i boot into the 2.1 rom that i downgraded to i see there is no superuser app but it appears i am rooted because most root apps work minus wireless tether. i just want root and to run a semi stock non cm7 type rooted rom. is this possible with s-on or not?
if so can someone point me in the right direction please?
Click to expand...
Click to collapse
I thought someone on here said that you could use clockwork mod but you probably have to put it in, i can't help since I rooted my phone with the original method that was much easier.
Have you tried installing rom manager and letting it flash clockworkmod recovery?

jacewt said:
I thought someone on here said that you could use clockwork mod but you probably have to put it in, i can't help since I rooted my phone with the original method that was much easier.
Have you tried installing rom manager and letting it flash clockworkmod recovery?
Click to expand...
Click to collapse
i was working on it for a client, i gave up. thanks anyways.

[GUIDE] TF300T Unlock/Root/Flash for Factory JB Devices on 4.1.X (newbie friendly)

Having recently purchased a TF300T with intent to customize the hell out of it, I ran into a big problem. There wasn't one definitive guide for my general case, some of the steps I read weren't completely clear, and I often had to put pieces together from multiple guides to get where I wanted. Halfway through the process it occurred to me that sharing my experience in form of a guide could give the community something I wish that I had when I began. So enough with the intro, let's visualize the process before we begin.
This guide is for new owners of TF300T devices that have Jelly Bean 4.1.X preflashed from the factory. ​
joelalmeidaptg said:
If your tablet has 4.2.1 Android version from Asus, DO NOT FLASH A RECOVERY THAT WAS ACTUALLY MADE FOR 4.1 TABLETS! You will end up on a PERMANENT BRICK with no solution until now. You won't be able to use fastboot ever again. You won't be able to flash anything ever again. You will be stuck with a bricked tablet!
If you are looking for a Recovery for a 4.2.1 bootloader (and a complete guide for updating), read this thread: http://forum.xda-developers.com/showthread.php?t=2187982 Don't do it with any other tutorial: they are for 4.1 bootloaders!
Click to expand...
Click to collapse
For those curious...
My TF300T was one of the Champagne Gold models purchased from Groupon with a serial that begins with C9. I recall seeing a user with a Champagne Gold from Amazon that still had ICS. If you're still on ICS, this guide isn't for you-- Read up on NVflash and decide if you want to take advantage of it BEFORE you upgrade to JB.
Here's an overview of what we will be doing:
Click to expand...
Click to collapse
Unlock the TF300T
Backup apps, app data and files (Recommended, Optional)
Install ClockworkMod Recovery (soon to be replaced with TWRP; I gave in)
Root the TF300T (Optional)
Backup your stock Asus ROM (Recommended, Optional)
Flash a Custom ROM
Backup your working Custom ROM (Optional)
Additional information you should know:
Click to expand...
Click to collapse
This guide has been made with the total android noob in mind. Having only owned an android tablet for a week, I too am an android noob. On the flipside, I'm no noob to hardware and software exploits and modifications. I've tried to make this friendly for any type of noob, but there are a few instances where I expect basic menu and Windows 7 navigation skills.
ClockworkMod Recovery doesn't appear to have a "Shutdown" function, nor does it display current battery level-- for this reason, the recommendation and warning to have a battery charged to at least 60% is extremely heavy. The worst thing that can happen to any device is usually an incomplete flash. Don't let it happen to you-- start charging your TF300T NOW.
I have seen reports that "Fastboot" doesn't work properly on Windows 7 64-bit. This guide addresses that issue, as I also encountered it. If you don't know what "Fastboot" is, in the words of an admirable comedian, "You gonna learn today". Don't worry about it for now!
Your device came with JB-- you didn't miss the bus for NVflash. In your case, the bus never came.
I am not responsible for any damages caused to (but not limited to) yourself or your device.
Even if you think you're pretty good at figuring this stuff out, stick to the directions as close as possible.
If you love tweaks, you're going to love your custom ROMs.
Let's get started!
Unlocking Your TF300T
Click to expand...
Click to collapse
WARNING: Unlocking your TF300T will void your warranty. If your device breaks or fails under normal use, don't expect Asus to pick up the tab! Be aware that once unlocked, it cannot be relocked.
There are two ways you can go about this-- Either download the official Asus unlock utility for Windows or download the .apk and install from your tablet (Asus utility still working! I successfully unlocked mine on JB 4.1.1). I chose to download the .apk and install directly on my tablet, therefore this is the method I will cover.
To download the .apk file, scan the QR Code below with Barcode Scanner (free; on Play store) and open the URL to the Asus Support page for the TF300T. Alternatively, if you are viewing this thread on your TF300T, you may simply tap the code below.
​
On the Asus Support page, select "Android" as your OS. The page will reload and present you with a list. Click on "Utilities", then after it has loaded, download the Unlock Device App. When it is done downloading, a notification will pop up in the lower right corner. Click on it to install the Unlock tool. You'll also be able to open the app immediately after the install completes-- open it now.
After scrolling to the bottom of the End User Licence Agreement, select the checkbox indicating that you agree to those terms. You should now have access to the slider that will unlock your tablet. Stay connected to your wifi and unlock when ready. The unlock will not work without access to the internet.
If I recall correctly, your tablet should reboot. Just let it do what it wants. After it's done doing it's thing, take this opportunity to make backups! when you and your tablet are ready, we'll continue on to the next step.
Setting Up The Android SDK and Installing ClockworkMod Recovery
Click to expand...
Click to collapse
​Perhaps this was the most frustrating part of my experience-- Installing the Android SDK went fine when I could actually find the .exe download. After that it was a matter of getting the drivers for Fastboot working properly. I was able to narrow it down to a problem for users of Windows 7 64-bit.
From your PC, go HERE, scroll down and click on "Download For Other Platforms". Scroll down more and under the "SDK Tools Only" downloads, you should find a download that looks like: "installer_r##-windows.exe" where "##" is the revision number. Download this .exe and assuming Windows is installed on C:\, install it to either "C:\tools\android-sdk" or "C:\android-sdk". If Windows is not installed to drive letter C, replace the drive letter with the correct letter for your system. Do the same when following the command prompt examples that follow.
Open the Android SDK Manager. Search for "SDK Manager" in the start menu and you should find a result with the same name and a little android icon. Once it's open, you'll be presented with a list. Check the box next to the "Tools" folder, then expand the "Extras" folder and check the box next to "Google USB Driver". In the lower right corner, click "Install packages...", agree to all when ready and begin your downloads.
In the settings application of your tablet, go to the "Developer options" tab near the bottom. Ensure that the switch in the top right corner is in the "ON" position, then under the "Debugging" header, enable "Android debugging". Read the following carefully before you continue: Shut down your tablet and connect your USB cable. Hold the power and volume down buttons at the same time. Keep holding until you see a menu. The menu will consist of a few items, among them there is "RCK", a USB icon, an Android icon, and a "Wipe Data" icon. Tap volume down until the USB icon is selected, then press volume up. Cross your fingers and hope drivers install automatically.
They probably won't, so have windows look in the \android-sdk\extras\ folder. It should say the drivers installed successfully. Either way, open the start menu, and right click on "Computer". Click "Manage", then in the left hand pane of the new window, click "Device Manager". The "Other Devices" section may be already expanded in the center pane. If it is, look to see if "Fastboot" appears in that section with a yellow exclamation mark.
If it isn't there, you shouldn't be worried-- check for a section called "Android Phone" or "Portable Devices". Look for a device called "Android ADB Interface" or "Fastboot". It shouldn't have a yellow exclamation mark next to it.
In the event you have the device appearing with a yellow exclamation mark next to it, go HERE and download PdaNet. This was my remedy for this error. Unplug your TF300T from your computer and install PdaNet following instructions. During the install a warning will appear to install unsigned drivers. Install the driver anyway, and let the installation finish. You can now plug your TF300T back in, and it should be recognized automatically. Just in case, hold the volume down and power buttons again until your tablet restarts and you see your hidden menu again. Once again, tap volume down until the USB icon is selected, then press volume up again to select it. Check the Device Manager again and you should find the "Android Phone" section at the top. Within it, you'll find a device called "Android ADB Interface".
Now that we have your tablet and computer set up nicely, we can finally install ClockworkMod (CWM) Recovery. Go to THIS thread and download the attachment called "recovery-jb.img" (thanks XpLoDWilD!). It is VERY important that you download "recovery-jb.img" as this is the version for users with Jelly Bean bootloader!
Rename the file you just downloaded to "recovery.img" and place it in \android-sdk\platform-tools . In Windows 7, open the Start Menu and search for "cmd". You should see a result called "cmd.exe". Right click that result and click "Run as Administrator". Now type the following commands into the new command prompt window in order to flash CWM Recovery:
Code:
cd C:\tools\android-sdk\platform-tools\
fastboot -i 0x0B05 flash recovery recovery.img
DON'T unplug your tablet!! Don't close the window either! Wait for the command prompt to finish what it's doing, then you can type the final command:
Code:
fastboot -i 0x0B05 reboot
Your tablet will reboot. Once it has fully rebooted, shut it down and hold volume down and power again to access our tablet's hidden menu. This time, instead of selecting the USB icon, select "RCK" and press volume up. If I'm not mistaken, "RCK" stands for "ReCovery Kernel". ClockworkMod Recovery should load up. If it doesn't, then you were not successful in flashing CWM. If it does, then you can go to the Backup and Restore menu and create a backup.
I was overconfident when I went through all this, and I didn't make a backup-- for me, I wasn't able to get my SD card detected (64GB fat32), but even in this case you should be able to make a backup to your "Internal SD card". Unfortunately, you are on your own for this step. Make sure that you transfer this backup to your PC after creating it. You may need to disable Developer options in your TF300T's settings before you can transfer files over again.
In THIS post, XpLoDWilD gives instructions on how to Root your tablet. If I'm not mistaken, this applies to users who are using a ROM that does not already have root. If you care about Root right now, you can go ahead and flash his attached .zip file using CWM to your TF300T.
When I did this, I selected the .zip file with CWM and then went back to the main menu to select reboot. CWM then prompted me that it needed to fix permissions in order to keep Root. I tried it both ways-- first I let it fix permissions, then used a Play store app to check for root. Test came up negative, so I tried again without allowing it to fix permissions. Negative again. I tried again, allowing it to fix permissions again and then left it alone. If you are successful in rooting your TF300T, you can use Titanium Backup to backup your device later. However I used an app that did not require root that worked fine. The choice is yours.
Flashing a custom ROM
Click to expand...
Click to collapse
Now it's time to find a custom ROM to flash. For my guide I will cover Baked TF300T Blackbean #6-- Based on CyanogenMod10, and quite a nice upgrade from the stock ROM. The only downside I found is the Asus App Backup application is not included and cannot be installed. I'm unsure why this is the case-- I have even attempted to install it via CWM with no success. If you need this app or the App Locker app, I suggest you choose a non-CM10 ROM. You are on your own in deciding an alternative, but I have heard great things about CleanROM and I seem to recall reading that these incompatible Asus apps work on it. Don't take my word for it-- do your own research to make sure!
It should also be noted that ROMs like Blackbean #6 have some potentially dangerous settings that can make a power user salivate profusely.
Spiderman's Dad said:
With great power comes great responsibility
Click to expand...
Click to collapse
Okay, so it was his uncle, whatever. But either way, if you're going to install this ROM (or any other with overclock tweaks), BE CAREFUL when selecting different settings for CPU speed and overclocking. I used to overclock my PC as a hobby and pushed a 1.8GHz CPU to 2.77GHz on air cooling.. The thing I learned in the process is if you don't have the proper settings, your computer becomes unstable and weird things start happening. Data corruption, clicking the Start Menu does something crazy and unusual, PC crashes randomly, etc... Some of these errors are due to insufficient cooling-- a problem you cannot remedy when working with a portable device.
Assuming you are new to this tablet like I am, use this rule of thumb when dealing with foreign and potentially dangerous things: DON'T TOUCH IT until you understand it. Then when you understand it, understand it again. Then when you feel you've understood it twice, take baby steps. It's like jumping up a cement set of stairs-- you're definitely not going to try to jump five steps in your first attempt, unless you want to risk smashing your face and bloodying yourself up. Take it one step at a time-- make sure you can land on your feet before deciding to go further.
There's a lot of other options Blackbean #6 has that the average user can still appreciate, so ignore those overclocking/CPU stuff and focus on the other tweaks. Nova Launcher is included and is pretty sweet. I upgraded to Nova Launcher Prime and feel it's worth the extra $4, but I'll leave that for you to decide. There are more options than merely Nova Launcher alone, and not all of them have a price tag.
Without further adieu, let's download the Blackbean #6 ROM and Gapps. Head over to THIS official release thread for the downloads. The names of the files you want are:
baked_tf300t_blackbean-6_jb-bl_b6.zip
gappsinverted-jb-20121029-signed.zip​
Put them into a folder called "bb6" and copy the folder over to your TF300T. If your SD card is working in CWM (from CWM, go to the "mount" menu and try to mount SD card), copy the folder to your SD card.
NOW is the time to do any final backups before your fresh ROM install! I recommend "App Backup & Restore" on the Play store. If your tablet is rooted, you can also use Titanium Backup. Both will work fine, though generally speaking people seem to prefer Titanium Backup. People also seem to prefer TWRP over CWM, but I personally find the design unappealing. More importantly, I could only find a proper guide on installing CWM on a factory flashed JB TF300T.
Once you've made your backups, don't do anything until these backups are safely transferred to your PC! Don't forget to backup your music, movies and photos...
Now that you're 100% confident you've made all the backups you need and your battery is well charged and ready to go, let's flash your custom ROM! Shutdown and enter our hidden menu you should be very familiar with by now. Boot into CWM (with RCK icon from hidden menu selected, press volume up), then press volume up/down to navigate.
READ THE FOLLOWING SECTION BEFORE DOING ANYTHING ELSE:
Select "install zip from sdcard" and tap power. If you placed your "bb6" folder on your SD card, tap the power button once more. If it says "Can't mount /sdcard/" in the bottom left corner, then select "choose zip from internal sdcard" and tap power. Earlier you should have put your ROM and Gapps in a folder called "bb6". If you can't find this folder in either the SD card or internal SD card locations, GO BACK, reboot, and make sure you put the folder on your TF300T or your SD card. You should also make sure that the ROM and the Gapps file are inside that folder as well. Do NOT unzip them! They are just fine as they are. We are NOT flashing the ROM and Gapps yet, we are merely making sure they are there before you wipe your tablet. If the files are there, go back to CWM's main menu.
Select "wipe data/factory reset" and tap the power button. Confirm that you want to wipe, wait for it to finish.
Now select "wipe cache partition" and press the power button. Confirm that you want to wipe, wait for it to finish.
Go back to the main menu and select "advanced" and tap power, then select "wipe dalvik cache" and tap power. Confirm that you want to wipe, wait for it to finish.
Don't worry! Your ROM and Gapps should still be in your bb6 folder. Navigate to "install zip from sdcard" again, and let's make the magic happen. We are going to install the ROM first, then install Gapps. Only after both the ROM and Gapps are installed will we reboot our tablet.
So select the ROM first, confirm that you want to install, wait for it to finish. This one will take a long time compared to the Gapps. Just be patient and wait, even though it looks like it's not doing anything.
Then select the Gapps, confirm that you want to install, wait for it to finish.
Finally, reboot your tablet and cross your fingers. You should be greeted with the sweet victory of the startup animation. Go through the first time setup routine, and make sure the tablet works. From here you can optionally backup your custom ROM, but I recommend getting your settings the way you like them before you backup.
Give yourself a pat on the back--you survived! Hope this guide helped someone out-- I was able to sort through my problems fine, but I felt it important to share my experience. I know I couldn't have been the first to hop through these hoops anyway.
Congrats on your custom ROM Transformer Pad. Enjoy your tablet.
P.S. Questions? Comments? Suggestions? If you have any of the three, feel free to share! If it's a suggestion, please PM me and I'll see about making edits to my guide. All are appreciated, and especially anything that clears up any uncertainties I've expressed.
Special thanks (individuals and groups I owe credit for my process):
Drgravy, Team Baked, and everyone who wrote code that was used in the Blackbean ROMs. Blackbean #6 is my first custom ROM, and so far it's been great!! Keep up the awesome work!
XpLoDWilD, for CWM Recovery + Root on TF300T. These files and instructions were the major keys in making my endeavor a success
I also want to send out a big thank you to every other individual and team who has released a custom ROM for the TF300T-- admirable work, and far more than I could ever do. Thanks for giving us options and making us excited to have a customized tablet!
(....And many more! Currently in finals week (yikes) and can't recall everything right now-- will add more as I remember)

It's a shame that such a well written guide has so little thanks. Have mine.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app

Very nice. hopefully this helps people just getting the tf300.
note, if you want to install TWRP recovery instead, your command will change accordingly, just make sure you type in the exact file name you want to flash. so if your recovery file is named twrp.blob:
fastboot -i 0x0B05 flash recovery twrp.blob

Thanks!
Your guide helped me a lot. I had problems only with root. Flashed 4 times, but always got "no root acces". Finally, I downloaded root package from here http://forum.xda-developers.com/showthread.php?t=1845377 and it works well

is there any way around that "unknown error..." when i try to use the unlock app yet?
I keep trying but the same error message keeps coming up

sq1ne said:
is there any way around that "unknown error..." when i try to use the unlock app yet?
I keep trying but the same error message keeps coming up
Click to expand...
Click to collapse
Is your tf300 new? first hand? or have u ever sent it to asus for repair before?

Well written, well thought out instructions. Many, many thanks!! I'm still having some trouble though. I get stuck once I download the unlock app, open it, agree to the EULA, then another warning appears that is a black screen white text and a yellow triangle. Nothing happens after that. There are no buttons to agree, no checkboxes, nothing happens. Any advice?
*UPDATE* Figured it out. Be sure to sent the font in settings->display->font size to small, then you will see it. The large font pushes the agree button off the bottom of the screen.

It would be great if CWM in this OP were replaced with TWRP. Many are having issues with CWM. Me being one of them. I flashed TWRP with fastboot and no more problems!
I agree with the post above. Sad that such a well written post has so little thanks. :good:

thnx for this amazing guide, but I am still unsure of this guide will work for me.
I am from Holland (Europe)
specs from my ASUS Transformer TF300T:
Android 4.1.1
Kernel 3.1.10 ([email protected])
Buildnr JR003C.WW_epad-10.4.2.18-20121122
Pad EC Version PAD-EC20T-0216
My question is...will this guide also work for me? ...since I have JB 4.1.1 & build 10.4.2.18
I am also worried about the fact that this guide in for an american(?) transformer I gues...so do I need other files then the files mentioned?
I would love to have ROOT and install a custom rom and remove bloatware etc.
thnx for the help in advance!

Thank you so much, perfect for so many people here.
Can you edit it with TWRP? I would use this right now but as above poster said there have been issues with CWM so don't want to try it.
P.s. i got mine from groupon too

Tamaskan said:
Is your tf300 new? first hand? or have u ever sent it to asus for repair before?
Click to expand...
Click to collapse
bought mine brand new just this past Black Friday.
updated to .18 firmware
I don't want to have to send it in.

GodfleshNL said:
thnx for this amazing guide, but I am still unsure of this guide will work for me.
I am from Holland (Europe)
specs from my ASUS Transformer TF300T:
Android 4.1.1
Kernel 3.1.10 ([email protected])
Buildnr JR003C.WW_epad-10.4.2.18-20121122
Pad EC Version PAD-EC20T-0216
My question is...will this guide also work for me? ...since I have JB 4.1.1 & build 10.4.2.18
I am also worried about the fact that this guide in for an american(?) transformer I gues...so do I need other files then the files mentioned?
I would love to have ROOT and install a custom rom and remove bloatware etc.
thnx for the help in advance!
Click to expand...
Click to collapse
Yes, it will work, I've tried it. But i suggest you use TWRP custom recovery though. CWM has high chances of getting bricked.

Tamaskan said:
Yes, it will work, I've tried it. But i suggest you use TWRP custom recovery though. CWM has high chances of getting bricked.
Click to expand...
Click to collapse
Could you also please add a NOOB tutorial for installing TWRP Recovery (this forum is very confusing in getting the right tutorials / avoiding outdated tutorials which would brick my TF300T etc)?
Example:
quote from XDA forum in TWRP topic: "The fastest and easiest way to install TWRP is to use the GooManager app" <--- GooMnager needs ROOT so I can't use this method?
My ASUS TF300T is completely untouched & unrooted still and don't won't to mess it up.

GodfleshNL said:
Could you also please add a NOOB tutorial for installing TWRP Recovery (this forum is very confusing in getting the right tutorials / avoiding outdated tutorials which would brick my TF300T etc)?
Example:
quote from XDA forum in TWRP topic: "The fastest and easiest way to install TWRP is to use the GooManager app" <--- GooMnager needs ROOT so I can't use this method?
My ASUS TF300T is completely untouched & unrooted still and don't won't to mess it up.
Click to expand...
Click to collapse
www.mediafire.com/?7v1gwbbzqzvzto7 <- fastboot and twrp, the twrp is out dated so if you want you can download new one from twrp website.
2)Extract the recovery with fastboot files zip and open a command prompt in the same folder of the adb and fastboot files (you must click the fastboot and adb when extracred and i suggest you put your extracted fastboot and recovery zip in C:\(foldername) and then open cmd)
3) Reboot into the bootloader of your tablet, type: adb reboot bootloader
4) When your tablet has reached the bootloader navigate with volume down to the usb icon and press volume up to confirm.
5) To flash the recovery type:
fastboot -i 0x0b05 flash recovery tf300t-jb.blob
Credits to krabappel2548.

Tamaskan said:
www.mediafire.com/?7v1gwbbzqzvzto7 <- fastboot and twrp, the twrp is out dated so if you want you can download new one from twrp website.
2)Extract the recovery with fastboot files zip and open a command prompt in the same folder of the adb and fastboot files (you must click the fastboot and adb when extracred and i suggest you put your extracted fastboot and recovery zip in C:\(foldername) and then open cmd)
3) Reboot into the bootloader of your tablet, type: adb reboot bootloader
4) When your tablet has reached the bootloader navigate with volume down to the usb icon and press volume up to confirm.
5) To flash the recovery type:
fastboot -i 0x0b05 flash recovery tf300t-jb.blob
Credits to krabappel2548.
Click to expand...
Click to collapse
Here is a little update on my progress...
- I unlocked the bootloader of my TF300T
- I managed to install latest TWRP
- Made a (COMPLETE) backup of the untouchedl system with TWRP <--- DO THIS BEFORE ANYTHING ELSE!
- Rooted the TF300T with the WW file in this topic: http://forum.xda-developers.com/showthread.php?t=2033205 <----works awesome!
- Made a second (COMPLETE) backup of the now ROOTED system with TWRP
- Tried installing the latest "Cleanrom 3.01 Inheritance", but got the infamous "bootloop" too...the rom has been pulled down from the forum till that is fixed ( I thought I had done something wtong flashing a custom rom, but actually a lot of others had the same problem)
- Waiting for a "bootloop fixed" Cleanrom Inheritance 3.02....and gonna try flashing it again.

first of all thanks a lot ive been going crazy looking for this!! my question is will it work for me?
i bought my tf300t in sept with ics and upgraded to jb....
also i tried this not to long ago and ran into a problem after i unlocked
so right now its just unlocked but not rooted do i need to reverse that or what?
my apologies im extremely noob haha

GodfleshNL said:
Here is a little update on my progress...
- I unlocked the bootloader of my TF300T
- I managed to install latest TWRP
- Made a (COMPLETE) backup of the untouchedl system with TWRP <--- DO THIS BEFORE ANYTHING ELSE!
- Rooted the TF300T with the WW file in this topic: http://forum.xda-developers.com/showthread.php?t=2033205 <----works awesome!
- Made a second (COMPLETE) backup of the now ROOTED system with TWRP
- Tried installing the latest "Cleanrom 3.01 Inheritance", but got the infamous "bootloop" too...the rom has been pulled down from the forum till that is fixed ( I thought I had done something wtong flashing a custom rom, but actually a lot of others had the same problem)
- Waiting for a "bootloop fixed" Cleanrom Inheritance 3.02....and gonna try flashing it again.
Click to expand...
Click to collapse
i never backup.... I only backup app using titanium backuo, if something on the rom goes wrong i just reflash latest firmware from asus website. If you like custom roms, i suggest you use Energy Rom if you want OC or Hydro rom if you want just modified stock rom with better performance.

I have a problem while I try to run the flash recovery command. I have done all steps prior to this.The only difference I see is in device manager I get "ASUS Android Devices". Now, the error I am getting comes after trying to run the command, I get "error: cannot load 'recovery.img' No error" . I have also tried the pdanet solution. Thank you for your help in advance.

Stupid question... but I am going to ask it. Having never rooted my TF300 it is on latest firmware will this guide still apply to be even though I bought my device running ICS but have updated to latest firmware? Have never rooted tablets before so all new to this.

Agera said:
Stupid question... but I am going to ask it. Having never rooted my TF300 it is on latest firmware will this guide still apply to be even though I bought my device running ICS but have updated to latest firmware? Have never rooted tablets before so all new to this.
Click to expand...
Click to collapse
It will work as long as you are using Jelly Bean

[ROOT] Root the new Blu Studio G with Kingo Root

Okay, so this isn't my work I'm just verifying that it does attain root on the new Blu Studio G, and making the necessary program easy to find. All thanks should go to Kingo ROOT.
WARNING!!! You could brick your phone. I am not responsible if you brick it, chuck it at someone, or fling it off your balcony in frustration. That's on you!!!
What you will need:
1) Kingo ROOT (attached to this thread).
2) A windows PC. (This may work in WINE on Linux, or in Virtual box on Mac, but I can't confirm that.)
3) Developer Options, USB Debugging, and install from Unknown Sources enabled on your phone.
4) your sync cord.
5) About 10 minute.
Got all that? Let's get started.
STEP ONE: Go to Settings, About Phone, Build Number. Tap it 7 times. It will sa "You're a Developer Now"
STEP TWO: Go to Settings, Developer Options. Turn on the soft switch in the upper right corner. Now scroll down to USB Debugging and check the box.
STEP THREE: Go to Settings, Security. Scroll down to Unknown Sources and check the box.
STEP FOUR: Connect your phone to your PC, and wait for all the drivers to install. If they don't automatically on your version of Windows as they do on Windows 10, the drivers are available on the XDA wiki.
STEP FIVE: Unzip and Install Kingo ROOT Installer. Now run it and follow on screen directions closely. when it is done, reboot.
STEP SIX: Install your favorite Busybox installer from the Play store [I use the by Stephen (Stericson) because it has the newest stable busybox.] When that is done, Reboot.
YOU ARE DONE.:laugh:
P.S. I ported TWRP touch recovery - available here. There is also a Philz touch recovery made for our device by nobreak1970 available here.
P.P.S. I am also working on several ROMs for the Studio G - when they are flawless I will post them; NOT BEFORE.

Rooted mine yesterday with KingRoot and used SuperSume to replace it with SuperSu.
Flawless.
I'm running exposed all sorts of different modules haven't found one that doesn't work all we need is a custom recovery now.

Blu studio G plus (BLU_S510_V13_GENERIC) Roms/help
Hi guys. I've made a big mistake. Earlier today I was deleting old Twrp backups to make room for new ones with fx root. Well while I was at it I deleted a couple of logs to and some things I thought were just empty residual files. When I closed out fx my phone crashed to boot screen. And is stuck there. I can get to recovery but currently there are no stock/custom Roms for my particular build. I have looked everywhere. I've found every build but my own and its frustrating. I don't know what I deleted to make my system fail. So I have no chance of trying to look up files and manually install them. I've found a ROM pretty close to my build (S510_V09) But before I result to such drastic measure that will potentially do more harm than good. I figured I would try my chances here first. Any ideas at this point would be greatly appreciated. Thank you guys.

G900V Re-Activation Lock, BUILD KOT49H.FA44_G900VVRU2APA1 4.4.2

I'm stuck on some developer ROM.. Was trying to follow instructions to get passed the activation lock. So I currently have a barely working ROM installed (as it seems it's for developers). I don't care what version of android I get installed at this point.. Looking for some help. I've been trying to fix it for days now. I don't have access to the icloud email I used to set up the samsung account, that's what started all of this *cries*

FancyPantsu said:
I'm stuck on some developer ROM.. Was trying to follow instructions to get passed the activation lock. So I currently have a barely working ROM installed (as it seems it's for developers). I don't care what version of android I get installed at this point.. Looking for some help. I've been trying to fix it for days now. I don't have access to the icloud email I used to set up the samsung account, that's what started all of this *cries*
Click to expand...
Click to collapse
You could try using Odin to flash the appropriate firmware though I'm not sure if it would wipe the reactivation lock

FancyPantsu said:
I'm stuck on some developer ROM.. Was trying to follow instructions to get passed the activation lock. So I currently have a barely working ROM installed (as it seems it's for developers). I don't care what version of android I get installed at this point.. Looking for some help. I've been trying to fix it for days now. I don't have access to the icloud email I used to set up the samsung account, that's what started all of this *cries*
Click to expand...
Click to collapse
Which/what instructions were you going by....?

Deleted

FancyPantsu said:
I'm stuck on some developer ROM.. Was trying to follow instructions to get passed the activation lock. So I currently have a barely working ROM installed (as it seems it's for developers). I don't care what version of android I get installed at this point.. Looking for some help. I've been trying to fix it for days now. I don't have access to the icloud email I used to set up the samsung account, that's what started all of this *cries*
Click to expand...
Click to collapse
@FancyPantsu, do you know what OS version you were running before you had done what, IMHO, you shouldn't have unless you know exactly what you are doing. You didn't actually flash a ROM persay, you flashed, i believe, the engineering ROM or something like that.....let me/us know EXACTLY what Android version you were running before you ODIN'd the factory Tar file. By that I mean OG5, OK3, PB1, PD1, etc. But need that to possibly get you out of your predicament....

al50 said:
@FancyPantsu, do you know what OS version you were running before you had done what, IMHO, you shouldn't have unless you know exactly what you are doing. You didn't actually flash a ROM persay, you flashed, i believe, the engineering ROM or something like that.....let me/us know EXACTLY what Android version you were running before you ODIN'd the factory Tar file. By that I mean OG5, OK3, PB1, PD1, etc. But need that to possibly get you out of your predicament....
Click to expand...
Click to collapse
Honestly this would be the first time anything like this has happened, haha.. I've flashed many devices with custom roms and never seemed to have this much of a problem. Basically the whole situation was I got the phone from my cousin who didn't need it anymore, she doesn't know her google info (no way of finding out now), so I figured what the hell and started screwing with the phone. Samsung being Samsung.. This happened. I seem to have flashed a dev rom or as you said an engineering rom (which I'm pretty sure it is). If I can remember correctly it was running.. 6.0.1.
If it helps any, I'm up for trying anything I've got plenty of phones laying around at this point, would be nice to have the s5 again though.
**Sorry for the very, very, very late reply!
-Thanks.

... del ...

bbsc said:
All you need is:
1. Install a 4.4.2 with working Samsung Account. It's a little tricky because you cannot downgrade your phone via Odin to 4.4.2. Root that "developer ROM" you have, install Safestrap Recovery and use it to flash a custom stock-near 4.4.2.
2. Boot it and bypass Setup Wizard. It's a little tricky too but is easily done with an OTG cable and a USB stick. There are other methods but I like this one .
3. Create a new Samsung account (or login to your existing Samsung account) from the phone and turn Reactivation Lock off.
After this you'll be able to flash any firmware.
Click to expand...
Click to collapse
Is it possible to message you directly in case I need any help or have questions? @bbsc

... del ...

bbsc said:
Please, ask questions and I'll answer if I can.
Have a look at the first and the third post in this thread: https://forum.xda-developers.com/ve.../testers-required-easier-root-method-t3561529
It will give you directions how to root your current rom and to install Safestrap Recovery.
This will be the first step
P.S. Nothing more. Just G900VVRU2APA1, Apex launcher, BusyBox, Towelroot, Safestrap Recovery.
Click to expand...
Click to collapse
Oh jeez. That's confusing already.. Lol. I've got G900VVRU1ANCG downloaded \, Towelroot v3, Safestrap KLTEVZ
I'm currently booted into the current engineering rom. Next step?
(Sorry if I'm not catching it the first time)

... del ...

bbsc said:
The next step is to read the thread I've given you link to, download files, install Apex launcher, BusyBox, Towelroot, Safestrap recovery. To root engineering ROM.
You'll need some 4.4.2 stock-like ROM to install via Safestrap Recovery. Odin won't work. This ROM will do. You can download it here.
After this you need to reboot to Safestrap Recovery and install kltevzw_NCG_eLLiKat1_0.zip
Click to expand...
Click to collapse
Alright. Currently I have the files downloaded, moving them over to the sd card now. EMMC_15_VZW_QB2_STOCK_MAGISK_ROOT.zip, EMMC_15_Root_Bootloader_Unlock+S5_QB2_PB1.zip, Towelroot.apk, Safestrap.apk. Missing anything that you can notice? I'll continue to follow the steps and see where it lands me

... del ...

bbsc said:
Supersu.apk missing. My fault, sorry.
1. Copy apk files and kltevzw_NCG_eLLiKat1_0.zip into the phone's memory.
2. Install Apex_Launcher.apk (you'll need to turn Unknown Sources ON) but do not run it.
3. Install BusyBox.apk but don not run it.
4. Install Safestrap_KK.apk but do not run it.
5. Install tr_v2.apk - Open - make it rain (a message "You should have root, no reboot required" should appear) - Back.
6. Install Superuser.apk - Open - Continue - Normal - Reboot.
7. After reboot, in the pop-up window - Apex Launcher - Always - Ok.
8. Menu (dotted button) - BusyBox Free - Grant - close balloon - Install - close balloon - Back.
9. Safestrap - Grant - Agree - Install Recovery - Reboot to recovery. Wait patiently for SafeStrap Recovery to boot.
10. Swipe to Allow modifications - Wipe - Advanced Wipe - Dalvik/Data/Cache - Swipe to Wipe.
22. Back - Back - Back - Install, install kltevzw_NCG_eLLiKat1_0.zip.
Reboot system and now you must have a 4.4.2 phone with Samsung account locked. Next step will be to bypass Setup Wizard.
Click to expand...
Click to collapse
Got into recovery once. Followed the wrong directions- off the link you gave me. Wasn't supposed to do anything else from there I suppose. Now I reboot to custom binary blocked by reactivation lock. Solution? Gotta redo everything again?

... del ...

bbsc said:
Sorry.
You have to begin again from the start and flash COMBINATION_VZW_FA44_G900VVRU2APA1_VZW2APA1_257265 6_REV00_user_mid_noship_MULTI_CERT.tar.md5 with Odin.
I'll prepare a detailed guide with files if needed but a bit later.
Click to expand...
Click to collapse
No need- I redid everything already. About to boot into safestrap.

... del ...

bbsc said:
I'll leave it here to edit and add links later.
1. Charge the battery to more than 50%.
2. Download Odin and COMBINATION_VZW_FA44_G900VVRU2APA1_VZW2APA1_257265 6_REV00_user_mid_noship_MULTI_CERT.tar.md5.
3. Download applications files - apks.zip.
4. Download ROM file - kltevzw_NCG_eLLiKat1_0.zip.
5. Run Odin.exe.
6. Select COMBINATION_VZW_FA44_G900VVRU2APA1_VZW2APA1_257265 6_REV00_user_mid_noship_MULTI_CERT.tar.md5 in Odin's AP slot, boot the phone into the download (Odin) mode, connect with USB cable to the computer, press Start, wait till the flash process is finished. Press Exit and wait for the phone to complete reboot.
7. Disconnect USB cable from the phone and connect again.
8. Unzip apks.zip into the apks forlder on the Desktop.
9. Copy everything from apks folder to the root of phone's internal memory.
10. Copy ROM file kltevzw_NCG_eLLiKat1_0.zip to the root of phone's internal memory.
11. Disconnect the cable from the phone.
12. Press Menu (dotted button) - My Files - All - RootS5.
13. Apex_Launcher.apk - Settings - Unknown Sources - Ok - Back - Apex_Launcher.apk - Next - Install - Done.
14. BusyBox.apk - Install - Done.
15. Safestrap_KK.apk - Install - Done.
16. tr_v2.apk - Install - Open - make it rain (a message "You should have root, no reboot required" should appear) - Back.
17. Superuser.apk - Install - Open - Continue - Normal - Reboot.
18. After reboot, in the pop-up window - Apex Launcher - Always - Ok.
19. Menu (dotted button) - BusyBox Free - Grant - close balloon - Install - close balloon - Back.
20. Safestrap - Grant - Agree - Install Recovery - Reboot to recovery. Wait patiently for SafeStrap Recovery to boot.
21. Swipe to Allow modifications - Wipe - Advanced Wipe - Dalvik/Data/Cache - Swipe to Wipe.
22. Back - Back - Back - Install, install kltevzw_NCG_eLLiKat1_0.zip.
23. Reboot System - Do not install. After reboot you should see 4.4.2 Setup Wizard (dark background).
24. Connect to Wi-Fi AP.
25. Get a FAT-formatted USB stick of any size and a USB-OTG cable. Throw any apk file on the USB stick and connect it to the phone.
26. When the phone recognizes the storage it will pop-up an Explorer window. Navigate to your apk file and tap it once. You should see a security warning with link to Settings.
27. Press "Settings", navigate to Reactivation Lock and disable it. The phone will ask you to enter login/password from your Samsung account or to register a new one. Do it.
28. After logging into the Samsung account you should be able to disable Reactivation Lock.
29. Flash any firmware on your choice. The current firmware is outdated and may be non-operational in some points.
Click to expand...
Click to collapse
Thank you very much kind sir Restored, up and running again.

FancyPantsu said:
Thank you very much kind sir Restored, up and running again.
Click to expand...
Click to collapse
~~ Now if I want to flash a custom rom from 4.4.2 up to 7.0 how can I do that..? Currently trying multiple roms, none of them will boot correctly. Get's stuck in a boot loop

FancyPantsu said:
~~ Now if I want to flash a custom rom from 4.4.2 up to 7.0 how can I do that..? Currently trying multiple roms, none of them will boot correctly. Get's stuck in a boot loop
Click to expand...
Click to collapse
This question does not concern this discussion.
Your phone is now "clean" and if you flash a factory firmware with Odin and perform a factory reset it will be in a "like new" state.
You'd better begin with these threads:
One
Two
Personally I and my family and my friends use this ROM with the latest firmware for SM-G900V.