How to root Tegra Note 4.3
"Unlocking bootloader
1. Unlock the bootloader
Access bootloader by either from poweroff holding volume down and power keys... Or enable USB debugging via pc enter adb shell reboot bootloader
Once at bootloader type in terminal/cmd fastboot oem unlock and follow intructions till the end...
WARNING DEVICE WILL WIPE USERDATA(EVERYTHING)
Device is now unlocked
2. install recovery - steps above
3. Download supersu.zip from chainfires website
Install via recovery... (Android terminal, su, reboot recovery)
Navigate to Supersu.zip via volume up, down keys and powerbutton - http://download.chainfire.eu/372/Sup...erSU-v1.86.zip" -
Shaky156 ( Thanks for bringing this to the TN7)
For more info and CWM recovery go to Shaky156 's thread... http://forum.xda-developers.com/showthread.php?t=2586432
Root 4.2
METHOD 1 (RECOMMENDED)
_________________________________________________
thanks to Gnurou
"So, I have finally updated my SHIELD rooting method to support Tegra Note 7 as well, so you guys don't need to install weird programs on your PCs:
https://github.com/linux-shield/shield-root
Rooting by itself is quite easy, you need to have adb and fastboot on your system then:
1) Enable USB debugging in the developer options and plug your TN7
2) Download https://github.com/linux-shield/shie...7.img?raw=true
3) In a shell, issue "adb reboot-bootloader"
4) In the same shell, go into the directory containing root_tn7.img and run "fastboot boot root_tn7.img".
Rooting will take ~15 seconds and the tablet will reboot. You should then have SuperSU installed and working.
Note that these are not exactly the instructions mentioned on the README file of my Github repository. That's because TN7's bootloader is not interactive as SHIELD's for the moment, I hope this will be fixed.". All thanks to Gnurou
4.2 Chinese root method
METHOD 2
______________________________________________________
Ok so for starters the tegra note does come with an unlocked boot loader so that a big plus. To root I followed these steps..
"There is another method to root the tegra note easily if you know chinese......
You may download the software called Jin Shan Mobile Assistant at the site below:
google it --> (zs.ijinshan.com)
EDIT: HERE IS A DIRECT LINK TO DOWNLOAD THE ROOT TOOL
https://drive.google.com/file/d/0B2Sc2UBbSHchb1pBUGpPN2N1Sm8/edit?usp=sharing
click and download the PC ver. setup file at right handside.(wrote 支持设备：安装win8/Win7/Vista/XP系统)
After installation, plug in your tegra note via USB. Press the ROOT大師 at the bottom left corner.
It will checked your device model as P1640. Then press "確定". It will simply root your device immediately.
:good::good::good:"
Thanks to hotsuma2000
Once I was rooted using the method above I installed Supersu from market and it replaced the superuser from the above method.. I then removed all apps that were installed from using the Chinese root.
STEPS
__________________________________________
The .exe file to download is about 30mb.
Once you download the file run it using Windows.
Open the program after installation.
Make sure USB debugging is checked on your device. (FYI to get developer options go to settings about tablet and press on build number until a message pops up saying you have Dev options.)
Plug the tegra note into your PC and the program should then recognize your device at which point you will see the root option.
Click root and magic...
The root program will install it's own version of superuser but don't worry I will get to that.
Once rooted go to Google play and download Supersu by chain fire then open it. You should then be prompted to install.. It will say another superuser app is detected and ask to replace..
There you have it feel free to ask away anything on your mind
If I was a help to anybody please throw me a thanks
Sent from my TegraNote-P1640 using XDA Premium 4 mobile app
Ksehwail said:
I have found a link to root the tegra note however the directions are not in English but I did follow all the fastboot and adb commands and was not able to get root... If anybody can help I would be very grateful thanks
Click to expand...
Click to collapse
I will probably release a Tegra Note rooting method similar to the one I did for SHIELD (https://github.com/linux-shield/shield-root ). Just give me a few more days/weeks.
Btw, how come there is no Tegra Note forum on XDA yet?
Thank you sir I will be anxiously awaiting... Thanks for the update now I can sit back and wait let me know if I can help in any way if ever u need a tester or whatever no problem
Sent from my TegraNote-P1640 using XDA Premium 4 mobile app
I also will be anxiously awaiting root help. Thanks in advance.
+1
Can't wait for root! Thanks in advance. I don't know why there isn't a forum yet. Hopefully some mods will get on it
Ksehwail said:
I have found a link to root the tegra note however the directions are not in English but I did follow all the fastboot and adb commands and was not able to get root... If anybody can help I would be very grateful thanks
Edit thanks to somebody's instructions I followed I was able to root the device with a few clicks... Thanks will update op just in a rush
Sent from my TegraNote-P1640 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Dude, don't keep us waiting like this!
Hi could you please upload link to root file and a how to
Thanks Jason
**BUMP**
Ksehwail said:
I have found a link to root the tegra note however the directions are not in English but I did follow all the fastboot and adb commands and was not able to get root... If anybody can help I would be very grateful thanks
Edit thanks to somebody's instructions I followed I was able to root the device with a few clicks... Thanks will update op just in a rush
Sent from my TegraNote-P1640 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Where's the info? Please post the solution you found. I've been digging through forum after forum and have tried 3 or 4 "one-click" root tools. So far nothing has worked. I really want to use Titanium Backup on this device.
UPDATE I finally got root on my Tegra NOTE 7!!! The process was a bit haphazard and inept but after enough tinkering I was able to get it done! Since the method is a bit involved I would recommend waiting for an easier solution. That being said, for those, like me, who just can't wait feel free to PM me and I'll point you in the right direction.
feel free to pm me for instructions or direction
I would be interested in directions for how to root. Why not just post them in this thread?
pottersam said:
I would be interested in directions for how to root. Why not just post them in this thread?
Click to expand...
Click to collapse
I have updated the OP to include directions let me know if it is to vague
Ksehwail said:
I have updated the OP to include directions let me know if it is to vague
Click to expand...
Click to collapse
Thank you for the update. Any idea how secure this method is?
Fantastic! It didn't work the first time I tried it, though I think that's because the program hadn't detected the tablet yet, but the second time it worked like a charm! It's a shame that PC program is in Chinese... it actually looks pretty cool! Thanks so much... not having root has been killing me, but hey, this thing's only been out just over a week... didn't expect it so soon!
Ksehwail said:
Click root and magic...
Click to expand...
Click to collapse
Unfortunately when I click ROOT, the progress bar immediately stops and the process doesn't seem to complete. It did install some apps though.
Any ideas?
jp22382 said:
Unfortunately when I click ROOT, the progress bar immediately stops and the process doesn't seem to complete. It did install some apps though.
Any ideas?
Click to expand...
Click to collapse
just double check make sure debbuging is checked... also when you run the program wait until it shows TegraNote sometimes you have to wait a little bit. It took me like two times before I was able to do it let me know if you the problem continues
Tried on another computer and it worked fine, installed SuperSU and cleaned up the extra apps. Thanks!!
Now next step is getting a custom recovery so we can do backups
jp22382 said:
Tried on another computer and it worked fine, installed SuperSU and cleaned up the extra apps. Thanks!!
Now next step is getting a custom recovery so we can do backups
Click to expand...
Click to collapse
Something is in the works
Have not tried this yet but sounds ok.
Think I will wait for recovery as I want to try the exellent xposed framework on the note.
And then the wonderfull gravity box module.
Should be ok but safer to have a backup I think.
Thanks for finding and sharing this with us.
drc
These instructions will work for the EVGA TN7, correct? Sorry to ask the question, but I had a thought there may be differences between the EVGA and AV models. Thanks for any reply.
Related
Disclaimer
This may work on other versions - I can't see any reason why not - but the only ones it is confirmed working for is the i9023 and the i9020A running 2.3.6 and the Nexus S 4G running 2.3.7. If you use this to root other handsets then reply in the thread and I'll update this. This assumes you are starting with a completely stock Nexus S.
About
This works with Windows only by using DooMLoRD's excellent Easy Rooting Toolkit to root without deleting your data in under a minute.
Credits
This is a noob-friendly mashup of various tutorials and sources to provide you with root access on the stock Gingerbread ROM, and nothing else. Credits to DooMLoRD, for his amazing toolkit and kursk for the original i9023 tutorial that made me think Consider donating to DooMLoRD if you find this helpful.
Steps to Root your handset
Preparation
1)Update your Nexus S to 2.3.6 if it isn't already, getting the update file from here.
2)Rename the file you downloaded to "update.zip". Place it in the root of your SD card.
3)Reboot your phone into Recovery Mode by powering it off, then on again while holding the Vol + button.
4)Now you’ll see a triangle with exclamation mark, now repeatedly press Vol+ and power button to enter Recovery Mode.
5)Select "apply sdcard update.zip" and if necessary, follow on screen instructions to slect the update.zip file.
6)Reboot the device and you will be updated to 2.3.6
Click to expand...
Click to collapse
Connecting to your Computer
1)Download and install the Android SDK. This may not be necessary for the rooting process but is certainly handy for future hacking or mods that you will likely want to do once you've rooted.
2)Install the Nexus S drivers as detailed here.
3)Make sure USB debugging is still enabled on your device and you are ready to proceed to rooting.
Click to expand...
Click to collapse
Rooting your Nexus S
1)Download DooMLoRD's Easy Rooting Toolkit here.
2)Extract the zip to your desktop.
3)Connect your phone by USB and confirm USB Debugging is still enabled.
4)Double click the runme.bat file located in DooMLoRD's Easy Rooting Toolkit
5)Read the command prompt and press any key to root.
6)Your handset will be rooted and then reboot. The process should take around 1 minute.
7) Congratulations! You now have the stock ROM rooted and Superuser installed.
Click to expand...
Click to collapse
Further Steps
Now that your phone is rooted, you can use apps that require superuser access such as Root Explorer to modify system files.
You can install ROM Manager and use that to flash custom ROMs.
You may wish to unroot your device. This can be done as detailed by DooMLoRD here
Click to expand...
Click to collapse
I hope that some people find this useful.
But what's wrong with just flashing the signed superuser zip from stock recovery or any other superuser zip from cwm?
marcelnn said:
But what's wrong with just flashing the signed superuser zip from stock recovery or any other superuser zip from cwm?
Click to expand...
Click to collapse
Unlocking the boot-loader erases the phone. Hence the "Non-Destructive" part of the title.
Yes, this method does it in under a minute and doesn't wipe your phone, making it easier for people who are new to modding or just want an easy and quick root.
Rooted an 9020a stock 2.3.6. Great work, thanks.
TheManicGibbon said:
or just want an easy and quick root.
Click to expand...
Click to collapse
. zing!
Can someone please confirm if this works for i9020T OTA 4.0.3?
I don't *think* it will work on ICS...but you could give it a try, or wait for someone else to if you don't want to
Couple quick noob questions...
Does this unlock the bootloader?
Is this considered the old fashion way of rooting the NS4G?
I've tried the One Click Root by ShabbyPenguin with no luck
So I'm lookin to get this NS4G runnin 2.3.7 Gingerbread rooted..
Hoping someone can answer these questions for me thanks.
FWIW I'm not a complete noob I'm coming from a rooted EVO4G so I'm a noob in the NS4G area completely lol thanks in advanced
I've just checked my Nexus S i9023 and it appears the boot loader is still locked, in answer to your question. It is not possible to unlock the boot loader without wiping all your personal data.
Hope this helps.
TheManicGibbon said:
I've just checked my Nexus S i9023 and it appears the boot loader is still locked, in answer to your question. It is not possible to unlock the boot loader without wiping all your personal data.
Hope this helps.
Click to expand...
Click to collapse
Not really....
I'm not really worried about the phone being wiped clean I could careless its not my phone Im just confused about rooting this NS4G..and what actions need to be taken to do so...
I ran the One Click Root by Shabby but I keep getting
"error: device not found"
And I've installed every single driver that I've found and I still get the same error running the one click root
I guess my question should've been
What's another way to root the ns4g without the one click root?
Tell Siri I said SUCK IT!
Sorry, I forgot to answer your other questions
This method can be used to root a Nexus S 4G: I can't confirm it personally because I'm in the UK and don't have access to any kind of 4G tech, but "Samsung Nexus S 4G 2.3.7" is listed in the supported devices post here in DooMLoRD's Easy Rooting Toolkit Thread
TheManicGibbon said:
Sorry, I forgot to answer your other questions
This method can be used to root a Nexus S 4G: I can't confirm it personally because I'm in the UK and don't have access to any kind of 4G tech, but "Samsung Nexus S 4G 2.3.7" is listed in the supported devices post here in DooMLoRD's Easy Rooting Toolkit Thread
Click to expand...
Click to collapse
Awesome I'll give it go this evening thanks for answering the other threads Ive posted are dead nobody answers questions so I'm gonna proceed in hitting your thanks button. Lol
Tell Siri I said SUCK IT!
Yeah it can occasionally seem a bit like no one answers
Glad I helped.
Worked on my Rogers Nexus S I9020A, Thanks!
TheManicGibbon said:
Yeah it can occasionally seem a bit like no one answers
Glad I helped.
Click to expand...
Click to collapse
Didn't work what windows should I be running to do this?
Tell Siri I said SUCK IT!
question
I run the runme file and every step gets a
"the system cannot find the path specified"
error
then it says all done and the phone never reboots and nothing changes
I have installed the samsung drivers and tried again and still nothing changes
so . . .
now what?
TheManicGibbon said:
Yes, this method does it in under a minute and doesn't wipe your phone, making it easier for people who are new to modding or just want an easy and quick root.
Click to expand...
Click to collapse
Sorry, I don't understand. How you can install custom ROM as mentioned in OP if bootloader stays closed? Does it give only root access, doesn't it?
Sent from my Nexus S using xda premium
I'm getting a nexus s i9020T soon and was wondering if this root method might work for it? When it comes to computers I'm a complete idiot. If something does go wrong I'll be clueless how to fix it. The reason I want to root is to remove some apps I can't uninstall and also so I can do a full backup including app data. If this method is not suitable what is the best way to do it? A super easy one click method would be preferable. Thanks!
Yes! This Method Works! If you follow this step by step! It will Unlock the bootloader and give root access! I just rooted this morning ladies and gents!
XOOM2/Xyboard Everything root and more!
From 26/03/2014, I will no longer be updating this post as I no longer have the device and Motorola won't be upgrading the device further. Please instead of sending me PMs, go to the Q&A board or post your comment on this thread.
Note: This method will not work on Windows 8. Only Windows XP, Vista, 7, Linux and Mac OS X is supported.
Root Method - Honeycomb
1. Download the Windows version here, or the Linux/OSX version here.
2. Your Computer must have Motorola Drivers installed before rooting and connect your device with debugging on to your computer via USB. (Mac Users don't need drivers)
3. Extract the zip file from the download link, and run “run.bat” (on Windows) or “run.sh” from a terminal (on Linux/OSX)
4. Your device should reboot a few times during the process, don't worry.
5. Then you should see a finished message on the Root Method Window. At this point your device is safe to be removed from the computer.
7. As you are running Honeycomb if you are reading this then you should be receiving the ICS OTA soon. So lets backup your root so you can restore everything root after the upgrade (saves time). Download OTA Rootkeeper and backup root.
6. Well Done! You have root. Enjoy root and be safe.
Blog Post: Here
Root Method - Ice Cream Sandwich
1. Connect your Xoom2/Xyboard via USB to your Windows PC. Install Motorola Drivers from here.
2. Under Settings > Developer Options > Hit the "Enable USB Debugging" selection.
3. Download the Root Installer from here. (Says for Droid RAZR but also works on Xyboard and Xoom 2]
4. Unzip the download.
Bootstrap/Safestrap[Custom Recovery]
Waring: DO NOT proceed if you are inexperienced. bootstrap is messy and is only needed once we have ROMs cooking. All questions about the recovery ask in the developer thread.
1. Install the Bootstrap APK file.
2. Allow Superuser Powers.
3. Read the instructions which is displayed on the user interface.
5. You will now see a splashscreen after you reboot (before boot animation), here you can decide if you want to enter recovery or continue with boot.
-Method Under Constuction-
Unroot or temporary unroot
Temp Unroot - If you need to unroot for any reason and come back at any time, then install OTA Rootkeeper and then select the option "temp unroot). This will remove root without restarting and you can restore by a touch of a button.
Full remove of Root - If you want to complety remove root all together, if you need to send in your device for repair or trading your device. Install Ginger Unroot and continue with the onscreen instructions. This application has confirmed to work on the Xoom2/Xyboard.
Doing it right now
Linux version has a wrong link or not uploaded yet
mdcykkk9 said:
Linux version has a wrong link or not uploaded yet
Click to expand...
Click to collapse
Should be working now.
Thx is working now . i just made a donation to his paypal account. i hope for future support for the tablet .
Thanks, is good news. Now we just need that we have updates to fix bugs, and if it can be ics ...
This is worth a donation to continue the work.
édit : error, sorry, it's ok
Working well ! Thank you.
I rooted my Xoom 2 ME bought in France.
But I cannot update to 3.2.2 ???
My build 1.6.0_218.3-MZ607 ,current version 3.2
Would this work for Xoom 1 wi-fi version ?
ouatitw said:
Would this work for Xoom 1 wi-fi version ?
Click to expand...
Click to collapse
This root method should work on all Motorola Devices running honeycomb or gingerbread. Try it out and see if it does
Sent from my Motorola Xoom 2
I did the US ICS update on My UK Xoom so im on 4.03 at the moment - i believe Motorola added some file which prevents me so far from rooting with the current one click programs ? so would it be safe to try this ?
ouatitw said:
I did the US ICS update on My UK Xoom so im on 4.03 at the moment - i believe Motorola added some file which prevents me so far from rooting with the current one click programs ? so would it be safe to try this ?
Click to expand...
Click to collapse
The method is safe to try but Email Dan if you have any issues when rooting.
Thanks a lot Dan Rosenberg,
Suppose i root my device and if i need to use my warranty at later point of time.
Is there is anyway that i can hide Motorola that i have rooted my device.
luke.arran said:
The method is safe to try but Email Dan if you have any issues when rooting.
Click to expand...
Click to collapse
I wouldn't email Dan, I'd post it here... Dan probably has more than enough things going on than to answer all rooting questions on here...
This root method very well may work on the Xoom with ICS, never hurts to try it. I don't see how you can't root with an existing method though, with the Xoom being fully unlockable and all...
Elysian893 said:
I don't see how you can't root with an existing method though, with the Xoom being fully unlockable and all...
Click to expand...
Click to collapse
the thing is that maybe you can, but you might not want to Unlocking wipes all your data, apps, etc and also permanently sets a variable stating that your warranty is gone.
It might, for example, be desireable to create a backup of all your apps and data using titanium backup, which requires root, before unlocking your xoom.
Does this mean that more knowledgeable folks can create custom ROMs now, or does that still require an unlocked bootloader?
Trackz said:
Does this mean that more knowledgeable folks can create custom ROMs now, or does that still require an unlocked bootloader?
Click to expand...
Click to collapse
No, we need to figure out a bootstrap for custom roms. No custom kernels.
Also, the method to fix adb remount is reset every other boot by the kernel, init.rc rebuilds local.prop on reboot as a failsafe and can't be changed without a custom kernel...
Response to luke.arran
luke.arran said:
This root method should work on all Motorola Devices running honeycomb or gingerbread. Try it out and see if it does
Click to expand...
Click to collapse
Just to let you know this does not work on all Xoom models like you say. Here is my thread with my specs in it. I have tried it three times following the directions to a T and it never gets past;
"[*] Initiating Phase 1...
[*] This may take a few minutes, don't mind the buzzing."
I have now let it run for over an hour each time and it never goes any further and my Xoom is still not rooted. It did not even ever reboot on its own. Does anyone have any suggestions? If not I'll just use some threads 1 & 2, I got from a friend.
Thanks, InfiniteImmortal
llama-power said:
Unlocking wipes all your data, apps, etc
Click to expand...
Click to collapse
Not this method. It is supposed to unlock and root motorola devices in 10 minutes without deleting any files. When I read about this on android police I was very excited as I never rooted because I only needed Superuser for my Xoom (never was interested in ROMs) and could never justify scraping everything just for this.
I tested the files here on a windows 7 machine... if I run from command at step 2. I get su permission denied. If I run the batch file I get "failed backup" loop after the device has been detected
tried the portable one click .exe found in "Motofail: Universal Motorola Android Root Tool (Portable)" works perfect on my bionic
obviously fails to remount as it does not include local.prop from step 5. so it's not working on xoom
This is the most awesome root utility I ever came along. It took something like 6 mins to root my phone without losing any files, if I can get it to run on my Xoom this will be just a dream come true!
Update: This root method does not support the Original Xoom. Confirmed by Dan.
WARNING: Only works with firmwares under 4.3!
Since Kingo has now replied and the IMEI issues have been resolved, here is my tutorial on how to get root privileges on your Xperia Z safely and even more important easily! No need to worry about bricking now I will also post an alternative method that is just as easy!
So, here we go:
1. Download this file here: http://goo.gl/AIUANa
2. Install it on your computer (you can remove it later)
3. Open the installed program
4. Connect the phone to the computer
5. Go in settings and in developer options and then enable USB debugging
6. Click on ROOT!
7. The phone will now reboot, ROOTED! You are welcome! Please thanks if it helped!
Alternative method(10% more difficult). The only problem is that this is chinese language, so you have to click the exact buttons I tell you.
1. Download this file: http://goo.gl/U6Jwaf
2. Install the software, using the installation buttons as you would on any other windows installation.
3. When you have installed it, you will see a green button, press it. Then connect your phone on USB debugging mode.
4. When the phone is connected the software will recognise the phone and the green button will show "ROOT", click on it.
5. The phone is going to be rooted in some seconds and the process is finished when it will show a tick on the software.
6. The phone will reboot.
7. When it is rebooted, go to google play and download super su.
8. Open super su and it will ask you to update the binaries, and you must click on update, and then normal.
9. A window in chinese will pop up on the phone, this is the screen that allows you to give root permissions to any app. You must click the button on the right.
10. You are done! Root process is complete!
11. This is the most important step. Leave a thanks! If you liked the tutorial, please show it to me!
Post below if you have questions or don't understand!
can it root the latest .101 firmware on sony xperia z
aristide1997 said:
Since Kingo has now replied and the IMEI issues have been resolved, here is my tutorial on how to get root privileges on your Xperia Z safely and even more important easily! No need to worry about bricking now I will also post an alternative method that is just as easy!
So, here we go:
1. Download this file here: [MOD EDIT: Against XDA rules to use PPC links like ad.fly]
2. Install it on your computer (you can remove it later)
3. Open the installed program
4. Connect the phone to the computer
5. Go in settings and in developer options and then enable USB debugging
6. Click on ROOT!
7. The phone will now reboot, ROOTED! You are welcome! Please thanks if it helped!
Alternative method(10% more difficult). The only problem is that this is chinese language, so you have to click the exact buttons I tell you.
1. Download this file: [MOD EDIT: Against XDA rules to use PPC links like ad.fly]
2. Install the software, using the installation buttons as you would on any other windows installation.
3. When you have installed it, you will see a green button, press it. Then connect your phone on USB debugging mode.
4. When the phone is connected the software will recognise the phone and the green button will show "ROOT", click on it.
5. The phone is going to be rooted in some seconds and the process is finished when it will show a tick on the software.
6. The phone will reboot.
7. When it is rebooted, go to google play and download super su.
8. Open super su and it will ask you to update the binaries, and you must click on update, and then normal.
9. A window in chinese will pop up on the phone, this is the screen that allows you to give root permissions to any app. You must click the button on the right.
10. You are done! Root process is complete!
11. This is the most important step. Leave a thanks! If you liked the tutorial, please show it to me!
Post below if you have questions or don't understand!
Click to expand...
Click to collapse
This is valid for 4.3?
aristide1997 said:
Since Kingo has now replied and the IMEI issues have been resolved, here is my tutorial on how to get root privileges on your Xperia Z safely and even more important easily! No need to worry about bricking now I will also post an alternative method that is just as easy!
So, here we go:
1. Download this file here: [MOD EDIT: Against XDA rules to use PPC links like ad.fly]
2. Install it on your computer (you can remove it later)
3. Open the installed program
4. Connect the phone to the computer
5. Go in settings and in developer options and then enable USB debugging
6. Click on ROOT!
7. The phone will now reboot, ROOTED! You are welcome! Please thanks if it helped!
Alternative method(10% more difficult). The only problem is that this is chinese language, so you have to click the exact buttons I tell you.
1. Download this file: [MOD EDIT: Against XDA rules to use PPC links like ad.fly]
2. Install the software, using the installation buttons as you would on any other windows installation.
3. When you have installed it, you will see a green button, press it. Then connect your phone on USB debugging mode.
4. When the phone is connected the software will recognise the phone and the green button will show "ROOT", click on it.
5. The phone is going to be rooted in some seconds and the process is finished when it will show a tick on the software.
6. The phone will reboot.
7. When it is rebooted, go to google play and download super su.
8. Open super su and it will ask you to update the binaries, and you must click on update, and then normal.
9. A window in chinese will pop up on the phone, this is the screen that allows you to give root permissions to any app. You must click the button on the right.
10. You are done! Root process is complete!
11. This is the most important step. Leave a thanks! If you liked the tutorial, please show it to me!
Post below if you have questions or don't understand!
Click to expand...
Click to collapse
Can we root 4.3 rom with this method
Sent from my C6602 using XDA Premium 4 mobile app
Kingo isn't able to root 4.3 as of now, but all the older ones yes. Try the second method.
To go back to 4.2, please use this:
https://app.box.com/s/pnqhi5o9tqg1fv7uxunf
Contains the instructions to go back.
Or use this tool by trusted developer bin4ry that will root the same firmware versions (.67 and older) and doesn't need an internet connection to root your device - Root many Android
Sent from my C6603 using Tapatalk
kingvortex said:
Or use this tool by trusted developer bin4ry that will root the same firmware versions (.67 and older) and doesn't need an internet connection to root your device - Root many Android
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
Yeah but you need to have adb tools installed right?
aristide1997 said:
Yeah but you need to have adb tools installed right?
Click to expand...
Click to collapse
No, unless Bin4ry removed them from the tool since I last used it (unlikely).
Even if you did, it's preferable to use it over Kingo/Vroot that both send hardware IDs to China as part of the process. Security and transparency should not be sacrificed for ease of use.
Before you give me the usual line that Kingo doesn't collect anything, I suggest you look on their official Facebook page. They admit they collect various data from your device. Look at the images they posted on 7th November 2013, where they state that they collect hardware IDs and serial numbers.
Also, they were caught modifying open source software for their tool and only admitted that once caught.
Anyway, their tool is nothing but a collection of other people's work passed off as their own and nobody on a development site such as this should be recommending use of software created by bottom feeders like that.
Sent from my C6603 using Tapatalk
kingvortex said:
No, unless Bin4ry removed them from the tool since I last used it (unlikely).
Even if you did, it's preferable to use it over Kingo/Vroot that both send hardware IDs to China as part of the process. Security and transparency should not be sacrificed for ease of use.
Before you give me the usual line that Kingo doesn't collect anything, I suggest you look on their official Facebook page. They admit they collect various data from your device. Look at the images they posted on 7th November 2013, where they state that they collect hardware IDs and serial numbers.
Also, they were caught modifying open source software for their tool and only admitted that once caught.
Anyway, their tool is nothing but a collection of other people's work passed off as their own and nobody on a development site such as this should be recommending use of software created by bottom feeders like that.
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
Yes i believe you. I still posted both methods so people can chose the one they want, and if they want to root it, hey, it's there and it's easy. Personally, I used the second one (which is even more risky than kingo since it's chinese) and nothing happenes to my phone, and I did that back in september 2013.
So for now everyone is safe!
Not working for me on 4.3
It says "Need Root" to download the requisite dependency files then FAILED
Ben Ling said:
Not working for me on 4.3
It says "Need Root" to download the requisite dependency files then FAILED
Click to expand...
Click to collapse
Did you try the second method?
The second method will 100% not work either.
There is currently no way to root 4.3 directly without unlocking the bootloader.
Sent from my C6603 using Tapatalk
kingvortex said:
The second method will 100% not work either.
There is currently no way to root 4.3 directly without unlocking the bootloader.
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
Ah ok sorry then, you will have to unlock the bootloader first!
Perhaps change the thread title to reflect that only 4.2.2 and older is rootable by these methods.
Sent from my C6603 using Tapatalk
kingvortex said:
Perhaps change the thread title to reflect that only 4.2.2 and older is rootable by these methods.
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
I will put it in red now in the first line of the thread!
Thank for the guide..
aristide1997 said:
Ah ok sorry then, you will have to unlock the bootloader first!
Click to expand...
Click to collapse
Not true you can use NUTs method from 2.67 or .569..
But ye... quite the hassle and a one-click is welcome..
Is there a way to root/custom recovery when my usb port is broken ?
theorlyowl said:
Is there a way to root/custom recovery when my usb port is broken ?
Click to expand...
Click to collapse
Try using wifi adb.
Aka91 said:
Try using wifi adb.
Click to expand...
Click to collapse
Cant get wifi adb to work, the guide says it needs to be connected via usb first. And i cant do that, since my usb port is permanently broken.
Step by step instructional video
Help setting up adb for windows: https://www.youtube.com/watch?v=CyJlmTtLsIg
If you are already running Fire OS 4.5.3 and below, all you need to do is follow this video to root: https://youtu.be/KcQ30qcImJc
Steps:
1. Install the Fire OS 5.0 developer preview. EDIT: Do not do this. If you already have a lollypop ROM installed, use that instead of installing dev preview (You could cause a brick)
2. Enable ADB on your device and set up ADB on your computer
3. Download 4.5.3 firmware: https://kindle-fire-updates.s3.amazonaws.com/update-kindle-20.4.5.3_user_453011120.bin (Mirror coming soon. This download works for the Fire HD7 and HD6)
4. connect device to computer and run "adb reboot recovery"
5. use volume keys and power button to navigate to "Apply update from ADB"
6. from computer type "adb sideload update-kindle-20.4.5.3_user_453011120.bin"
7. from tablet select "wipe data/factory reset"
8. from tablet select "reboot system"
9. Complete setup (do not connect to a wifi network yet)
10. Download KingRoot: http://www.kingroot.net/
11. Download JmzFireHDTool: http://forum.xda-developers.com/fir...ool-jmz-fire-hd-7-tool-gapps-disable-t3113655
12. install both apps. "adb install KingRoot-4.1.0.249-release-nolog-201505211812_105001.apk" and "adb install JmzFireHDTool_v4.apk"
13. Temporarily disable otaverify via adb "adb shell pm block com.amazon.otaverifier" (spelled wrong in video)
14. Connect to wifi so that KingRoot can work
15. Open KingRoot on your device
16. press "try to root"
17. re-enable otaverifier "adb shell pm unblock com.amazon.otaverifier" (spelled wrong in video)
18. Open JMZ Fire Tools and press "Disable OTA's"
Note: If you ever need to upgrade back to lollypop, you should follow these steps so you do not brick device: http://forum.xda-developers.com/fire-hd/general/tools-fire-hd-67-rooting-gapps-t3371242/page4
Awesome find !!! Here is a direct link to the 5.2.0 update file:
http://forum.xda-developers.com/fire-hd/general/lolipop-ota-capture-t3141810
After the downgrade, install TWRP, and upgrade to 4.5.4 but this time with root and fully working GAPPS:
http://forum.xda-developers.com/fire-hd/general/root-v2-0-fireos-4-5-4-gapps-t3150613
http://forum.xda-developers.com/fire-hd/general/how-to-upgrade-to-4-5-4-twrp-root-t3141648
This way one goes directly to SuperSu, and a clean device with no traces of KingRoot.
bibikalka said:
Awesome find !!! Now, can you install TWRP, and try to upgrade to 4.5.4 while keeping root as per this post:
http://forum.xda-developers.com/showpost.php?p=61329063&postcount=4
This way one goes directly to SuperSu, and a clean device with no traces of KingRoot.
Click to expand...
Click to collapse
ah yes good idea. I'm hoping someone with ROM development knowledge will start a build. We've got just about everything setup so that a custom ROM can run
Sent from my LG-V480 using Tapatalk
powerpoint45 said:
ah yes good idea. I'm hoping someone with ROM development knowledge will start a build. We've got just about everything setup so that a custom ROM can run
Click to expand...
Click to collapse
The tricky part is that the unlocked bootloader still needs a signed kernel. Which is pretty constraining. It'd be interesting to replace the boot preloader, but the risks are high.
Upon boot (if connected to PC), the system flashes MT65xx pre-loader. Which seems to indicate that one could start looking into programs such as "Smart Phone Flash Tool" and "MTK Droid Tools" for MTK chipsets.
Another hope is that the 5.0 version would be sufficiently buggy, such that the bootloader can be made to boot unsigned kernels.
bibikalka said:
The tricky part is that the unlocked bootloader still needs a signed kernel. Which is pretty constraining. It'd be interesting to replace the boot preloader, but the risks are high.
Upon boot (if connected to PC), the system flashes MT65xx pre-loader. Which seems to indicate that one could start looking into programs such as "Smart Phone Flash Tool" and "MTK Droid Tools" for MTK chipsets.
Another hope is that the 5.0 version would be sufficiently buggy, such that the bootloader can be made to boot unsigned kernels.
Click to expand...
Click to collapse
Hashcode has gotten around this issue multiple times with something called a bootstrap but I'm not too sure how it works
Sent from my LG-V480 using Tapatalk
Btw, any chance you could post the direct link to 5.0 preview (for non-developers), since it's probably behind some registration page or something ...
i just signed in with my amazon account, you will need to unroot your fire and reset it as 5.0 is a OTA.
bibikalka said:
Btw, any chance you could post the direct link to 5.0 preview (for non-developers), since it's probably behind some registration page or something ...
Click to expand...
Click to collapse
I wish I could find that bin file link... I looked for it but could not find a link to the actual bin file.. If ota's download to the sdcard then It could still be accessed but I don't know where it downloads to. If it downloads to the data dir of the app it would be inaccesable since you need to be on the latest update in order to download the 5.0 version and on the latest version we have no root which means no access to data dir
Sent from my LG-V480 using Tapatalk
this is a great find. but stupid me only have a macbook pro and i cant set up adb. sucks..
edgar.vrgs said:
this is a great find. but stupid me only have a macbook pro and i cant set up adb. sucks..
Click to expand...
Click to collapse
you can set it up on a mac. Just do a little searching. I know it's plausible
Sent from my LG-V480 using Tapatalk
powerpoint45 said:
you can set it up on a mac. Just do a little searching. I know it's plausible
Sent from my LG-V480 using Tapatalk
Click to expand...
Click to collapse
i have tried but i cant figure it out
It worked perfectly. Thanks
Despite really wanting root and the possibility of using my already paid for apps from the Play store, I really like the lollipop version of fire os. I do think it's a bit ridiculous they haven't retained the old kindle skin because it's exactly how every real android tablet looks but at this point they should be forced by law to let people use the Play store as they wish. Sort of like how Verizon was once forced to allow tethering without a subscription.
devicer said:
It worked perfectly. Thanks
Click to expand...
Click to collapse
great to hear it!
Sent from my LG-V480 using Tapatalk
bpeery84 said:
Despite really wanting root and the possibility of using my already paid for apps from the Play store, I really like the lollipop version of fire os. I do think it's a bit ridiculous they haven't retained the old kindle skin because it's exactly how every real android tablet looks but at this point they should be forced by law to let people use the Play store as they wish. Sort of like how Verizon was once forced to allow tethering without a subscription.
Click to expand...
Click to collapse
I hear ya
Sent from my LG-V480 using Tapatalk
so i finally got adb on my mac to work, but now when i am on the last command to install 4.5.3 terminal says it can't read update-kindle-20.4.5.3_user_453011120.bin
has anybody done this on a mac and would like to guide me on what i am doing wrong?
edgar.vrgs said:
so i finally got adb on my mac to work, but now when i am on the last command to install 4.5.3 terminal says it can't read update-kindle-20.4.5.3_user_453011120.bin
has anybody done this on a mac and would like to guide me on what i am doing wrong?
Click to expand...
Click to collapse
does adb devices list your device. Maybe try re-downloading the update in case of corruption
Sent from my LG-V480 using Tapatalk
Perfect timing! Lost root last week and hoped for a way to get back. You the man
I wonder if there is a way to stop the update once it's downloaded, in order to grab the 5.0 update bin from /cache.
This would help to re-pack the update in a way that does not re-write key partitions, then one can have TWRP and root on 5.0
It does sound like 5.0 is a nice update, since it provides stock Android. That's what custom ROMs are usually for, but Amazon will give it away !
bibikalka said:
I wonder if there is a way to stop the update once it's downloaded, in order to grab the 5.0 update bin from /cache.
Click to expand...
Click to collapse
I was wondering the same. Seems like you could rename the otaverifier apk back to (plain) .apk and get the download but by keeping com...otaverifier blocked it wouldn't install. I'm just not sure these developer updates are handled like any other.
Hello everyone,
I've noticed that there hasn't been any threads about rooting the Xperia Z2 Tablet on lollipop. Most threads have discussed how to root the device on 4.4.4 and to create an update image to maintain your root whilst updating to 5.0+.
I've scoured the interwebs and found nothing so I'll make it easy for those whom don't know how to achieve root or don't want to do much work without creating images and such.
First off I'm not responsible for any inconvenience that may come with rooting your device and losing your warranty. I can and will be willing to help out in restoring or answering questions that you may have.
This method uses Kingroot... For those who have a problem with kingroot, it is only used to achieve root and this guide will also be showing you how to remove kingroot and install Supersu with ease. Using the link below download the necessary files: Kingroot V4, Supersume, XZDualRecovery 2.8.26. Place all these files on the root of your devices internal storage/SD card excluding Xdualrecovery as that needs a PC. (If you want to Xposed working I will also supply the files needed for that as well). https://www.mediafire.com/download/wrsajbgw2jr6czt
*Make sure you have unknown sources enabled under Settings>Security>Device administrators as well as Developer Options available and USB debugging enabled. (To enable Developer Options go to Settings>About Tablet>Build Number and click it 10 times).
1. Install NewKingroot.apk and run the application. It will notify you that a root method was found and to try it. It may take up to 2 minutes to achieve root. (If all you wanted was root and are content with kinguser then you're done! :good: if you want Supersu and/or a custom recovery then continue on to step 2!
2. Connect your Tablet to your PC via microUSB. On your PC open and extract the contents of TabZ-lockeddualrecovery2.8.26-RELEASE.combined.zip to your desktop. Now double click install.bat a screen will pop up providing you with options to install xdualrecovery. Choose option 2. Installation on ROM rooted with SuperUser by pressing 2 and enter. The script will run its course and tell you to grant permission on your tablet. Open up your tablet and a kinguser prompt will show asking you to grant or deny permission to ADB (Grant it!!!) afterwards your tablet will reboot on it's own to TWRP. (I advise you to either make a backup of the tablet now or after you install Supersu as insurance in case of any mishaps). Click reboot System.
3.Install Supersume, open the application and run it. It will of course ask to grant it permission (Grant it!!!) it will check the environment (making sure that there isn't any Pokemon nearby that you don't need... Sorry Pokemon Go reference) and it will begin removing kingroot and install Supersu. If you didn't have Supersu installed already great! It'll open up Supersu automatically. Supersu may ask you to update binaries (DO NOT click TWRP as it will reboot and you have to start the process over from step one!!! :crying: Just click Normal and once it says successful you're done! :victory: The next step is optional if you Want Xposed.
*Optional 4. Install XposedInstaller_3.0_alpha4.apk. Open your app drawer and open NDR Utils. It will ask for permission (Grant it!!!) now here you may choose your preferred recovery... Philz Touch Recovery,TWRP or Clockwork Mod Recovery. Click Reboot to Primary Recovery (fourth option) once it's rebooted you want to click install>SD>xposed-v85.1-sdk22-arm-by-romracer-20160620.zip and swipe to install. You should get a success when it's finished. Now simply reboot and your apps will be upgrading. Congratulations you now have root with SuperSU and xposed! :victory:
**if you wish to uninstall Xposed simply reboot to recovery and click install>SD>xposed-uninstaller-20151218-arm.zip uninstall the application once it's rebooted and you're good to go!
***if you have a problem with Supersume not working, reinstall Newkingroot.apk and run it again to get root. Then run supersume again (Grant permission!!!) and let it run its magic.
If anyone has issues, has questions or needs help PM and I will do my best to help and answer all your questions. Please don't be discouraged because I'm new here! I will be soon adding a link to a video tutorial on how all these steps can be done!
I have the Verizon 561, will this allow rom upgrade to marshmallow?
chin_bone said:
I have the Verizon 561, will this allow rom upgrade to marshmallow?
Click to expand...
Click to collapse
Hi there, I also have SGP561 as well for Verizon. Verizon didn't release Marshmallowfor the device yet unfortunately. ???? still waiting and more then willing to confirm when it does
Just ran on my 5.1.1 z2 and work first time. Great stuff thanks!
creepingcreep said:
Just ran on my 5.1.1 z2 and work first time. Great stuff thanks!
Click to expand...
Click to collapse
Glad it worked for you. Just wanted to help people out as I had invested time trying to figure out my own. I didn't like flashing files constantly so tried making easy.
Never had luck with kingoapp and today isnt any different
Thanks so much. I am away for another week but I can not wait to try this. I got a verizon z2 tablet since it seemed to be the cheapest 10 inch tablet. You have breathed new life in to it.
Sent from my SM-G930V using XDA-Developers mobile app
Am i correct that you don't provide the kingroot.apk?
Which version are you using?
How do you boot into custom recovery from device off? Everytime I try it takes me to the stock recovery
Sent from my SGP561 using XDA-Developers mobile app
ToneLa said:
Never had luck with kingoapp and today isnt any different
Click to expand...
Click to collapse
Sorry to hear what version are you using? Use the provided KingRoot in the download link provided
Daimonion1980 said:
Am i correct that you don't provide the kingroot.apk?
Which version are you using?
Click to expand...
Click to collapse
No, in the link provided all necessary apps and folders/zips are included. Including KingRoot apk
Cammy253 said:
How do you boot into custom recovery from device off? Everytime I try it takes me to the stock recovery
Click to expand...
Click to collapse
Power off device. While device is booting up at the Sony logo hold power and volume down/up (depends on customer recovery) until led flashes green and device vibrates then let go
JediDru said:
Thanks so much. I am away for another week but I can not wait to try this. I got a verizon z2 tablet since it seemed to be the cheapest 10 inch tablet. You have breathed new life in to it.
Click to expand...
Click to collapse
That's great news to hear! I picked one up and wanted to root and I did on KitKat but when I upgraded to lollipop I lost root and rooted it the long way... Needed something simpler and couldn't find anything on here. So I wanted to make sure a guide was available to all. Enjoy and let me know how it went
reymund602 said:
Power off device. While device is booting up at the Sony logo hold power and volume down/up (depends on customer recovery) until led flashes green and device vibrates then let go
Click to expand...
Click to collapse
Thank you working great
Sent from my SGP561 using XDA-Developers mobile app
If you're talking about your google drive, there is no kingoapp.apk in there
All there is:
- supersume.apk
- tabz-lockeddualrecovery
- xposed uninstaller
- xposed v85.1
- xposed installer
I downloaded the most recent kingroot, which worked on my Verizon sgp561, and then I used your superuser file to change over to su. Seems to work just fine.. I'm on 5.1.1.
I tried the most recent kingroot and it fails.
An old version gave me an error code of 0x162982
ToneLa said:
If you're talking about your google drive, there is no kingoapp.apk in there
All there is:
- supersume.apk
- tabz-lockeddualrecovery
- xposed uninstaller
- xposed v85.1
- xposed installer
Click to expand...
Click to collapse
Let me double check and if anything I'll post a link to the apk
Sorry that you're having issues though
bilestoad said:
I downloaded the most recent kingroot, which worked on my Verizon sgp561, and then I used your superuser file to change over to su. Seems to work just fine.. I'm on 5.1.1.
Click to expand...
Click to collapse
Thanks for confirming! If you didn't see the KingRoot apk in drive I'll upload the current version!
ToneLa said:
I tried the most recent kingroot and it fails.
An old version gave me an error code of 0x162982
Click to expand...
Click to collapse
What is the software version you are having problems with?