Hello. Today I wanted to transfer a movie from my PC to my N7 aaaand... something has happened.
When I go to my internal storage on my PC it doesn't show the blue bar below the name that tells how much free space I have: http://i.imgur.com/kOSjhb3.jpg
When I try to copy a file from the internal storage to the PC it says "Undefined error"
http://i.imgur.com/AZrgG8Y.jpg
And when I try to copy a file from the PC to the internal storage it shows that it's copying but the bar doesn't move and after 5-10 mins it says "The device has either stopped responding or has been disconnected."
http://imgur.com/OuthPXg (this pic was taken from Google images, I think the person who captured it had the same problem :cyclops
I tried with USB debugging on and off, redownloading and reinstalling drivers, rebooting - nothing.
I did a clean install with the Android 4.3 factory image a couple of days ago but I don't see how that can be a problem because yesterday I copied a bunch of avi. files to my tablet and today it just doesn't want to do that. *sigh* technology...
Have you tried using ADB to push or pull?
I have problems copying only if I'm not using the original N7 cable. Using the original cable, I get fast, reliable read/write throughput between my N7 and pc. I have one 3rd party cable that when I use it to copy from pc to N7 the 'copying' window comes up, but doesn't show the file copying and eventually hangs, but the file does copy and appears on the N7.
Username invalid said:
Have you tried using ADB to push or pull?
Click to expand...
Click to collapse
What ?
And I am using the original USB cable
http://forum.xda-developers.com/showthread.php?t=2141817
Username invalid said:
http://forum.xda-developers.com/showthread.php?t=2141817
Click to expand...
Click to collapse
Well that's great but I wanna fix this. My little brother won't know how to use this.
Ok I just checked now and it everything was ok. I have no idea what happened but now everything seems to be working fine, I am transfering my movie now
I can't get my Nook to mount on my computer after rooting with NookManager. Is this normal? I looked for a setting to re-enable this feature but couldn't find it. Any ideas? thanks
I forget where that is on settings, but if you have ADB working you can fix that.
You need sqlite3 installed on either host or Nook.
Code:
/data/data/com.android.providers.settings/databases/settings.db
update secure set value=1 where name='usb_mass_storage_enabled';
OTOH, if you have ADB, why would you want UMS?
Renate NST said:
I forget where that is on settings, but if you have ADB working you can fix that.
You need sqlite3 installed on either host or Nook.
Code:
/data/data/com.android.providers.settings/databases/settings.db
update secure set value=1 where name='usb_mass_storage_enabled';
OTOH, if you have ADB, why would you want UMS?
Click to expand...
Click to collapse
Thanks. I'm hoping I can find the setting. I don't really know much about ADB. I just want to be able to side load books easily.
Renate NST said:
I forget where that is on settings, but if you have ADB working you can fix that.
You need sqlite3 installed on either host or Nook.
Code:
/data/data/com.android.providers.settings/databases/settings.db
update secure set value=1 where name='usb_mass_storage_enabled';
OTOH, if you have ADB, why would you want UMS?
Click to expand...
Click to collapse
Shouldn't need to change the setting for a root with NookManager. USB mounting works but I have noticed sometimes that after connecting to the PC then disconnecting it looses its ability to be connected again as a USB drive until you reboot your Nook. Haven't spent the time to track down why the Nook looses its brain sometimes and won't connect.
straygecko said:
Shouldn't need to change the setting for a root with NookManager. USB mounting works but I have noticed sometimes that after connecting to the PC then disconnecting it looses its ability to be connected again as a USB drive until you reboot your Nook. Haven't spent the time to track down why the Nook looses its brain sometimes and won't connect.
Click to expand...
Click to collapse
I've rebooted. I've used sqlite to read and verify that 'usb_mass_storage_enabled' is set to 1. I've verified getprop reports that persist.service.mount.umsauto is 1. Still no usb automount.
Rooting isn't worth not being able to use Calibre
Is the host machine Windows?
if you loaded the ADB driver things can get out of whack and the UMS interfaces are driverless.
Normally when you connect a Nook to a host two new (UMS) disks will appear.
Whether those disks have backing (data behind them) is another question.
Are you missing the disks or the data?
Renate NST said:
Is the host machine Windows?
if you loaded the ADB driver things can get out of whack and the UMS interfaces are driverless.
Normally when you connect a Nook to a host two new (UMS) disks will appear.
Whether those disks have backing (data behind them) is another question.
Are you missing the disks or the data?
Click to expand...
Click to collapse
I am running Windows and have tried two different host machines that both worked with the Nook before the root.
The Nook does NOT show up whatsoever in "My Computer". Thanks for your help, I may just reset the firmware and give up on rooting it.
Classic773 said:
I am running Windows and have tried two different host machines that both worked with the Nook before the root.
The Nook does NOT show up whatsoever in "My Computer". Thanks for your help, I may just reset the firmware and give up on rooting it.
Click to expand...
Click to collapse
Sometimes Windows won't show a removable disk if another disk it has seen has been assigned the same drive letter. Plug your Nook into your PC and go into Administrative Tools | Computer Management | Disk management and see if the disks show up there. If they do
right click on them and select Change Drive Letter and Paths and assign them drive letters. It should stick after that unless you assign the same drive letter to another removable disk.
straygecko said:
Sometimes Windows won't show a removable disk if another disk it has seen has been assigned the same drive letter. Plug your Nook into your PC and go into Administrative Tools | Computer Management | Disk management and see if the disks show up there. If they do
right click on them and select Change Drive Letter and Paths and assign them drive letters. It should stick after that unless you assign the same drive letter to another removable disk.
Click to expand...
Click to collapse
Nope. I don't here the normal USB device connected sound that I here with other things, also the Nook doesn't show the normal popup that indicates its in USB mode.
I typically don't have an SD card in it, that shouldn't matter right. I've tried it with an SD card but most of the time I don't have one in.
You have ADB working on WiFi or USB?
If it's working on USB then you obviously do have it showing in Device Manager.
A somewhat tangental comment:
There seems to be lots of people who say, "I tried to root using Mega-Super-Giga-Updater" and it didn't work so I'm going back to stock 1.1.5".
Nook firmware is old and getting older with no update in sight.
I would strongly recommend standardizing on 1.2.1
Remember, the essence of "rooting" on the Nook is just enabling ADB.
All the other stuff is just the trimmings.
I have no knowledge/experience/insight of any of these "Super-Duper-Nooters".
Renate NST said:
You have ADB working on WiFi or USB?
If it's working on USB then you obviously do have it showing in Device Manager.
A somewhat tangental comment:
There seems to be lots of people who say, "I tried to root using Mega-Super-Giga-Updater" and it didn't work so I'm going back to stock 1.1.5".
Nook firmware is old and getting older with no update in sight.
I would strongly recommend standardizing on 1.2.1
Remember, the essence of "rooting" on the Nook is just enabling ADB.
All the other stuff is just the trimmings.
I have no knowledge/experience/insight of any of these "Super-Duper-Nooters".
Click to expand...
Click to collapse
The problem was the USB cable, which straygecko mentioned in different thread. Never thought of trying a different one since this one worked fine for charging. Thanks to both of you
Oh, you probably had a "charging" cable.
I ran into one of those once.
They only have 2 conductors in the cable.
It probably saved them a whole $0.02.
It's a cruel trick to play on somebody.
Renate NST said:
Oh, you probably had a "charging" cable.
I ran into one of those once.
They only have 2 conductors in the cable.
It probably saved them a whole $0.02.
It's a cruel trick to play on somebody.
Click to expand...
Click to collapse
Don't chuck them!
I find them invaluable if you want to charge a phone or nook without using it pop up as mass storage or MTP. They are also ALOT longer.
Great for car charging or grabbing power from public usb sources.
If booting from nookmanager to PC to copy backup across (something you should do asap before you forget) then trying to connect NST to computer after rooting you will find it won't appear in windows explorer.
This is windows getting confused. If you click on the safetly remove device icon you will see two drive letters are assigned its just explorer that can't access them. Easy fix is to reboot. If your like me and dozens of web browsing windows open and regard rebooting as something the power company forces on me few times a year you can do this to access.
Start->settings->Control Panel->Administration Tools->Computer Management->Disk Manager.
You will see the drive letters for your nook there. Right click (don't click format or delete!) and chose open. Explorer will now happily open a window with your drive contents.
Hello, nookies!
Today I have decided to make an easy-to-follow guide on mounting USB devices (cameras, USB sticks) on your Nooks! Hooray! :good:
DISCLAIMER - I am not responsible if you brick your Nook, break your USB device, the current state of the economy, or why Obama is the president. Please do research on these topics if you would like to know more.
DISCLAIMER 2 - I did not make either of the apps attached, I have merely posted them here for easy access.
So let's get started with some prerequisites!
Prerequisites:
A rooted Nook Touch or Nook Touch Glow with software 1.2.1 installed, as well as Superuser and su binary installed
A terminal app (attached below)
Renate NST's UsbMode.apk (attached below)
A USB host-enabled kernel correctly installed and working (see my signature for a Nook Touch Glow one)
A USB OTG cable
Steps:
Make sure that your Nook is completely charged before continuing!
Make sure that your kernel is definitely working and that USB mode is properly working, too!
1. Open up Renate NST's UsbMode.apk app. Tap the "Off" button. (This will stop your Nook from trying to charge itself from the USB device by turning off the current.)
2. Plug your USB OTG cable (without anything attached to it) into your Nook's USB port.
3. Tap "Host" in the UsbMode app. (This turns on Host mode.)
If the LED beside your Nook's USB port has turned solid green at this point, you are doing well!
4a. For USB devices that have a separate cord (cameras): Turn on the USB device. Plug its cord into its USB port. Now, connect both the device's cord and the device into the open end of the OTG cable that is attached to your Nook.
4b. For USB sticks/drives: Plug the drive directly into the open end of the OTG cable that is attached to your Nook.
5. Tap "View USB" in the UsbMode app. You should see the Nook's main listing at the top, as well as the plugged-in device's listing under it. The device's listing should have a black dot next to it.
Good job! You're doing well so far! :laugh:
6. Now, open up the Terminal Emulator app I attached below. You should have installed it already. When it opens, you should see a dollar sign ($) at the far left of each line.
7. Type in
Code:
su
. Now, instead of a $, there should be a # at the far left of each line.
8. Type in
Code:
mount -o rw,remount rootfs /
. This remounts /system as read-writable.
9. Type in
Code:
mkdir /usb
. This creates a directory called /usb in the root of your Nook's filesystem; it will be used to mount your USB device in.
10a. For USB devices (cameras, etc.), first type in
Code:
mount -t vfat /dev/block/uba /usb
. You will get some sort of error message, that's okay. Now, after typing that, type in
Code:
mount -t fvat /dev/block/uba1 /usb
.
10b. For USB sticks/drives. just type in
Code:
mount -t vfat /dev/block/uba1 /usb
.
11. If the above commands worked properly, you should now be able to go into a file explorer, navigate to the /usb directory, and boom! You can now manage your USB device's filesystem straight from your Nook!
Unmounting your USB drive
It is important that you unmount your USB device/drive properly before physically taking it out of your Nook. Here's how to do that.
1. Open up your Terminal Emulator app again.
2. Type
Code:
su
.
3. Type
Code:
mount -o rw,remount rootfs /
.
4. Type
Code:
umount /usb
.
5. Type
Code:
rmdir /usb
.
6. Take the whole cord/USB drive out of your Nook with the OTG cable.
7. Open up the UsbMode app again.
8. Tap "Auto". (This turns your Nook's current back to being automatically determined, instead of being off.)
9. Tap "Peripheral". (This makes your Nook return to having the ability to charge from an AC outlet (or whatever).)
10. You have successfully unmounted your device!
Hope this helps all of you guys who want to manage your USB devices on your Nooks! :good:
Reserved
Reserved for future use/expansion.
I hate to do this, but...
Bump.
I'm sure that someone can profit from this tutorial, right?
There was a whole thread on using my modified volume daemon to do this all automatically.
I've pretty much abandoned that train of thought.
I'm not really sure that anyone really wants to mount USB drives.
It's really a pretty current-intensive way to get data.
It's better to just use a 32 GB SD card in the Nook, formatted with something better than vfat.
Renate NST said:
There was a whole thread on using my modified volume daemon to do this all automatically.
I've pretty much abandoned that train of thought.
I'm not really sure that anyone really wants to mount USB drives.
It's really a pretty current-intensive way to get data.
It's better to just use a 32 GB SD card in the Nook, formatted with something better than vfat.
Click to expand...
Click to collapse
thanks for the efforts @Renate NST in creating the USB mode app, I really envy you guys for the knowledge and understanding you have of the tech involved.
I agree with you on the practicality of the application.
At the same time and more we can never let go off the THRILL in trying the invaluable efforts you manage to put in.
Kudos.
Coming back to the thrill of it all ...
@NoogiE ... thanks for the link to this thread ...
i am on 1.3.4 version of your 1337 ROM, assuming the USB kernel is in place, i opened @Renate NST's USBMode app and pressed Off, then i connected the OTG cable and pressed Host ... no action no led action ... if you can help ... thanks.
thanks,
aiamuzz said:
no action no led action ...
Click to expand...
Click to collapse
Hmm. You have this rooted and the UsbMode is not showing any "<errors>"?
You're sure that it's an OTG cable? (I've never seen one over 6" long. If you know of a longer molded cable, please tell me!)
You're sure that your kernel has the OTG fix?
You should get a quick flash (50 mS or so) out of the LED just pushing the host button on UsbMode even with nothing connected at all (no adapter).
With an adapter connected you should get a solid LED.
I've never gotten into writing/patching kernel drivers, but I always thought that someone would fix the buggy USB driver so that UsbMode would not be needed for regular OTG operation.
Renate NST said:
Hmm. You have this rooted and the UsbMode is not showing any "<errors>"?
You're sure that it's an OTG cable? (I've never seen one over 6" long. If you know of a longer molded cable, please tell me!)
You're sure that your kernel has the OTG fix?
You should get a quick flash (50 mS or so) out of the LED just pushing the host button on UsbMode even with nothing connected at all (no adapter).
With an adapter connected you should get a solid LED.
I've never gotten into writing/patching kernel drivers, but I always thought that someone would fix the buggy USB driver so that UsbMode would not be needed for regular OTG operation.
Click to expand...
Click to collapse
Hey thanks for looking into it @Renate NST ...
I am using the small 4-5 inch cable ... had a spare lying around.
I am not getting the quick flash you talk about while a press the Host button.
However when i open the USB Mode app the first line 'Request' shows empty, when i press the Host button it says <write error>
when i engage the buttons (off, 100mA, 500mA, 1.5A & Auto) the Max Current line blinks between <write error> and Auto ...
If that helps !!!
and the kernel part, I am running a copy of Yattaro and Nookie's 1337 ROM(the latest 1.3.4) which claims it supports USB host capability.
Is there any way i can run a command to check if the kernel supports ? Not that i doubt/question this ROM developers efforts/claims.
aiamuzz said:
Hey thanks for looking into it @Renate NST ...
I am using the small 4-5 inch cable ... had a spare lying around.
I am not getting the quick flash you talk about while a press the Host button.
However when i open the USB Mode app the first line 'Request' shows empty, when i press the Host button it says <write error>
when i engage the buttons (off, 100mA, 500mA, 1.5A & Auto) the Max Current line blinks between <write error> and Auto ...
If that helps !!!
and the kernel part, I am running a copy of Yattaro and Nookie's 1337 ROM(the latest 1.3.4) which claims it supports USB host capability.
Is there any way i can run a command to check if the kernel supports ? Not that i doubt/question this ROM developers efforts/claims.
Click to expand...
Click to collapse
You seem to be having a an su binary issue. Check and see if the su binaries are in /system/bin; if they aren't, copy them there from /system/xbin and reboot. Should work like a charm.
ИΘΘK¡€ said:
You seem to be having a an su binary issue. Check and see if the su binaries are in /system/bin; if they aren't, copy them there from /system/xbin and reboot. Should work like a charm.
Click to expand...
Click to collapse
hey Nookie ... copied the su to to /system/bin and the led came up ... but i can't see the connected device under 'View USB', could it be bcos i am using a Micro SD card on in USB adapter ?
PS: and hey i saw swapon and swapoff files(binaries?) in /system/xbin, does it mean your ROM supports SWAP ? With swap and hopefully NookKat the RAM deficit could be manageable ? My first Android Device was LG Optimus Pro, C660 which had 256 MB RAM & 140-160 MB internal storage for apps, The stock ROM used to keep popping the close any programs popups every now and then rather freqeuntly, On a custom CM7 official port ROM with swap support & dark tremors ap2sd scripts, i was able to get rid of the annoying pop up and install 60-70 user apps to SD card and still have a daily ROM. Do you think our device supports a similar setup with swap and darktremors aap2sd scripts ?
thanks
Quick N00b question- I am trying to get a GPS signal into my rooted NST. It has a micro USB. Do I need to do this in order for an app to get my serial signals?
I will paypal someone to help me get GPS signals into my NST using an app called Simple Sailor! Thx
lolokai said:
Quick N00b question- I am trying to get a GPS signal into my rooted NST. It has a micro USB. Do I need to do this in order for an app to get my serial signals?
I will paypal someone to help me get GPS signals into my NST using an app called Simple Sailor! Thx
Click to expand...
Click to collapse
Maybe. I'd have to look into your quest more to know for sure.
ИΘΘK¡€ said:
Maybe. I'd have to look into your quest more to know for sure.
Click to expand...
Click to collapse
Thx Nookie.
Is an app that can see what serial data is being provided via USB? Or, a GPS testing app that grabs data from the USB. Do apps always look for GPS data to come in via USB or is there another place that an app would look for GPS data?
lolokai said:
Thx Nookie.
Is an app that can see what serial data is being provided via USB? Or, a GPS testing app that grabs data from the USB. Do apps always look for GPS data to come in via USB or is there another place that an app would look for GPS data?
Click to expand...
Click to collapse
To tell you the truth, I don't think either of those exist. I could be wrong, though - @Renate NST has done some stuff using an old GPS puck on her Nook, so you can ask her.
ИΘΘK¡€ said:
To tell you the truth, I don't think either of those exist. I could be wrong, though - @Renate NST has done some stuff using an old GPS puck on her Nook, so you can ask her.
Click to expand...
Click to collapse
Hey thanks Nookie. I have found some info from both Top hat Soaring (glider people who needs daytime screen visibility as well as ADV riders - motorcycle navigation with again, daytime visibility) so I'll be pursuing those. Thanks again.
I looked into all this a while ago.
You should be able to go right from serial into the LocationProvider.
Strangely enough, most of the stuff I saw back then was using the mock location to handle the data.
This seemed like a detour to me.
I really should follow this up.
Using USB host mode and serial USB is not optimum due to the wackiness in the USB driver and the current draw.
This is a 1.8V GPS module: https://www.sparkfun.com/products/10890
Besides the advantage of low voltage/low power, the 1.8V serial can interface internally and directly to the Nook.
I think that I'll be ordering one of these.
I do not know anything about programming.
But I can do all the manual. ))
What am i doing wrong?
Excuse me. Forum does not post a link to the picture. I'm new here ... It is necessary to dial 10 messages.
You must manually copy the link in Internet Explorer.
http:
//i5.imageban.ru/out/2015/08/27/
1dcc71f5ed606d4e51a1c7ed10cec568.png
Nik782 said:
I do not know anything about programming.
But I can do all the manual. ))
What am i doing wrong?
Excuse me. Forum does not post a link to the picture. I'm new here ... It is necessary to dial 10 messages.
You must manually copy the link in Internet Explorer.
http:
//i5.imageban.ru/out/2015/08/27/
1dcc71f5ed606d4e51a1c7ed10cec568.png
Click to expand...
Click to collapse
It looks like your Nook is not recognizing any drives being plugged into it.
Can you give me some more details on your progress thus far?
NOOK!E said:
It looks like your Nook is not recognizing any drives being plugged into it.
Can you give me some more details on your progress thus far?
Click to expand...
Click to collapse
Here is my story in detailed illustrations.
https:
//ww
w.dropbox.com/sh/47n1bhgd3usq15q/
AAAh5uIrxWnVWbbgoXY7PQy3a?dl=0
Hy experts
i need your help again...
I have a Nexus 7 , and the screen is broken. I can't type anything and can't go inside the main settings, now. It's not possible to use my "look-screen-pattern"
Now I would like to do a backup of all data on my pc. (i want to open the backup file via winrar(or anything else), to get my photos, videos, apps etc. )
I have the android sdk tools installed, the google drivers too.
I used the recovery mode on my nexus. On the screen is a yellow sentence, what means the sideload function. But i don't need the sideload function. I only want a backup and no new rom system...
I tried to use adb shell commands to store a backup on my windows 7 pc.
But in my cmd a always get the same error.
unable to connect device....
The Tablet is not in the debug mode!! but i can't change settings, cause the display is broken
thanks for help
Get an OTG adapter cable and plug in a USB mouse/keyboard. That should get you through the unlock.
TeardownDan said:
Get an OTG adapter cable and plug in a USB mouse/keyboard. That should get you through the unlock.
Click to expand...
Click to collapse
can i use the tablet with a mouse??
i need to entry the look scrren, like this
https://thinkerbit.com/content/reviews/03-nexus-7/nexus-7-lock-screen.png
When you plug in a mouse, you will see a mouse pointer appear. To emulate taps, click any button. To emulate swipe, hold the button down from beginning to end of the swipe.