Related
https://www.youtube.com/watch?v=NP9WXLIzhTY
I want to first say that I did not figure out this method on my own, I saw it on Google+ via Matthew Pierce and modified it to make it easier to follow
Second, **do not try this on a device with a locked bootloader. You need the unlocked bootloader to do this**.
You'll want to first download these 2 things
1) Superuser zip to be installed in recovery (from Chainfire) -> http://download.chainfire.eu/366/SuperSU/BETA-SuperSU-v1.72B.zip
2) New TWRP for 4.4 KitKat (from Hashcode)->
http://forum.xda-developers.com/showthread.php?t=2534850
________________________________________________________________
Here's the method to get root:
1) let the system fully install the 4.4 Kitkat ota and reboot. **Make sure you are on the first OTA before you try to install the KitKat OTA, otherwise your phone could have major issues.** After it installs, do not do anything else, let it boot into android.
1b) Take the SuperSU installable zip and place it onto the internal storage
2) reboot phone to bootloader.
3) install Hashcode's TWRP using mfastboot flash recovery twrp-2.6.3.1-ghost-4.4.img. (**use the motorola fastboot binary**)
4) reboot device to recovery, do not boot into android before this step!
5) go to install and find then select BETA-SuperSU-v1.72B.zip
6) Boot back into android, and if needed, go to the Play Store and install SuperSU from Chainfire
7) enjoy root!
What is the advantage/difference in installing the SuperSU app you linked, in favor of the one included with the TWRP 4.4 recovery?
Sent from my XT1060 using xda app-developers app
Jexx11 said:
What is the advantage/difference in installing the SuperSU app you linked, in favor of the one included with the TWRP 4.4 recovery?
Sent from my XT1060 using xda app-developers app
Click to expand...
Click to collapse
Probably nothing. The only reason I mentioned the one in the play store, is because TWRP never actually asked me to root in the first place. I thought it was strange, but I didn't really think much of it
alex94kumar said:
Probably nothing. The only reason I mentioned the one in the play store, is because TWRP never actually asked me to root in the first place. I thought it was strange, but I didn't really think much of it
Click to expand...
Click to collapse
That's odd, I used the TWRP version in Hashcodes thread, flashed with the Motorola Fastboot. When I went to restart from TWRP it asked me if I wanted to root and I let it. Now I'm rooted.
Sent from my XT1060 using Tapatalk
Stranger things have happened, I guess. Regardless of which method you use, you'll end up with root either way
This doesn't seem to be working for me. I accidentally rebooted into Android (hit the power button) then tried the whole thing from scratch.
I get an image of andy with "no command" when I boot into recovery.
Edit: Seems like a low battery issue. Will try again after charging.
chaoslimits said:
This doesn't seem to be working for me. I accidentally rebooted into Android (hit the power button) then tried the whole thing from scratch.
I get an image of andy with "no command" when I boot into recovery.
Edit: Seems like a low battery issue. Will try again after charging.
Click to expand...
Click to collapse
same here but i have 85% battery
so i guess we will have to re-flash and push the supersu
The only advice I can give to either of you is to try reflashing TWRP again
Actually i did it again and it worked, guess we can't just skip steps.
Sent from my Nexus 7 using Tapatalk 4
Well im glad it worked out for you in the end
It worked after I charged the phone.
Thanks
Sent from my XT1060 using Tapatalk 2
How do I return my phone to default in order to install OTA
I have already flashed the stock recovery but my phone is still rooted. Do I need to unroot? I tried installing the OTA and it said it failed.
This method should work on any version with with an unlocked bootloader such as Sprint and T-Mobile - not just the dev editions.
alex94kumar said:
https://www.youtube.com/watch?v=NP9WXLIzhTY
I want to first say that I did not figure out this method on my own, I saw it on Google+ via Matthew Pierce and modified it to make it easier to follow
Second, **do not try this on a device with a locked bootloader. You need the unlocked bootloader to do this**.
You'll want to first download these 2 things
1) Superuser zip to be installed in recovery (from Chainfire) -> http://download.chainfire.eu/366/SuperSU/BETA-SuperSU-v1.72B.zip
2) New TWRP for 4.4 KitKat (from Hashcode)->
http://forum.xda-developers.com/showthread.php?t=2534850
________________________________________________________________
Here's the method to get root:
1) let the system fully install the 4.4 Kitkat ota and reboot. **Make sure you are on the first OTA before you try to install the KitKat OTA, otherwise your phone could have major issues.** After it installs, do not do anything else, let it boot into android.
1b) Take the SuperSU installable zip and place it onto the internal storage
2) reboot phone to bootloader.
3) install Hashcode's TWRP using mfastboot flash recovery twrp-2.6.3.1-ghost-4.4.img. (**use the motorola fastboot binary**)
4) reboot device to recovery, do not boot into android before this step!
5) go to install and find then select BETA-SuperSU-v1.72B.zip
6) Boot back into android, and if needed, go to the Play Store and install SuperSU from Chainfire
7) enjoy root!
Click to expand...
Click to collapse
Anyone knows how to do UNROOT if I used this method to get root?
I get a preflash validation failed because the file size is over the limit, but I've checked the file size is actually smaller than the limit.
Has anyone experience this?
Sorry this might be a noob question.
1) let the system fully install the 4.4 Kitkat ota and reboot.**Make sure you are on the first OTA before you try to install the KitKat OTA, otherwise your phone could have major issues.**
Can someone explain this to me? i keep reading it, but not understanding what it means.
s0nic69 said:
1) let the system fully install the 4.4 Kitkat ota and reboot.**Make sure you are on the first OTA before you try to install the KitKat OTA, otherwise your phone could have major issues.**
Can someone explain this to me? i keep reading it, but not understanding what it means.
Click to expand...
Click to collapse
If we're already on 4.4, how do we know if we have the first OTA?
Thanks
chillmeow said:
I get a preflash validation failed because the file size is over the limit, but I've checked the file size is actually smaller than the limit.
Has anyone experience this?
Sorry this might be a noob question.
Click to expand...
Click to collapse
I'm getting it too, and I've tried both the mfastboot and regular fastboot and I've tried redownloading the file several times. I'm beyond annoyed at this point I need root so I can restore my apps using titanium backup
---------- Post added at 03:45 PM ---------- Previous post was at 03:28 PM ----------
doctor_evil said:
I'm getting it too, and I've tried both the mfastboot and regular fastboot and I've tried redownloading the file several times. I'm beyond annoyed at this point I need root so I can restore my apps using titanium backup
Click to expand...
Click to collapse
OK I feel like an idiot. I just noticed that in the fastboot screen it shows that it's locked. I thought developer phones were unlocked by default?
ok after unlocking it I was able to install twrp recovery with no problems
Ok, what am I doing wrong?
I've got an unlocked GSM DE with 4.4.
I used the mac mfastboot to flash twrp and then select recovery. After that it just boots to android telling me I have an unlocked bootloader. Help?
pphi said:
Ok, what am I doing wrong?
I've got an unlocked GSM DE with 4.4.
I used the mac mfastboot to flash twrp and then select recovery. After that it just boots to android telling me I have an unlocked bootloader. Help?
Click to expand...
Click to collapse
Are you selecting recovery with the power button or the volume up button? Volume up selects. If you use the power button, the phone just boots normally.
All,
Thanks in advance for any help you can provide. I have a Nexus 4 that I rooted and installed CWM recovery on, but I never installed any new kernels, ROMs, or radios. I'm currently on 4.4.4 and I want to upgrade to Lollipop. The OTA upgrade failed. So I tried returning to stock recovery and doing both the OTA and adb sideloading the OTA zip. Both fail.
The error message is "Package expects build fingerprint of google/occam/mako:4.4.4/KTU84P/1227136:user/release-keys or google/occam/mako:5.0/LRX21T/1576899:user/release-keys; this device has google/occam/mako:4.4/KRT160/907817:user/release-keys." (But I definitely have 4.4.4 on my phone, not 4.4.0.)
The extra difficulty is that I really, really do not want to wipe my phone. I have a lot of apps with a lot of configuration and other user data. So is there anything I can do? I guess I should try unrooting somehow? Or is there some other zip I can download that, through some type of recovery, will install the OTA without doing this check and also without wiping me?
Thanks again!
moriarty00 said:
All,
Thanks in advance for any help you can provide. I have a Nexus 4 that I rooted and installed CWM recovery on, but I never installed any new kernels, ROMs, or radios. I'm currently on 4.4.4 and I want to upgrade to Lollipop. The OTA upgrade failed. So I tried returning to stock recovery and doing both the OTA and adb sideloading the OTA zip. Both fail.
The error message is "Package expects build fingerprint of google/occam/mako:4.4.4/KTU84P/1227136:user/release-keys or google/occam/mako:5.0/LRX21T/1576899:user/release-keys; this device has google/occam/mako:4.4/KRT160/907817:user/release-keys." (But I definitely have 4.4.4 on my phone, not 4.4.0.)
The extra difficulty is that I really, really do not want to wipe my phone. I have a lot of apps with a lot of configuration and other user data. So is there anything I can do? I guess I should try unrooting somehow? Or is there some other zip I can download that, through some type of recovery, will install the OTA without doing this check and also without wiping me?
Thanks again!
Click to expand...
Click to collapse
OTA wants complete stock and obviously it doesn't think so about your phone. One option could be to back up to the cloud or some place outside the phone with TiBu (or whatever backup app you trust), then flash lollipop and try restore from TiBu. Another option would be to unroot (Supersu has an option to completely unroot), then retry.
Actually, I figured out what works! This was on a stock rooted device with stock recovery, but I bet it would work with custom recovery too. Instructions modified from https://pay.reddit.com/r/nexus4/comments/1qny3f/howto_update_your_stock_w_lte_nexus_4_without/ .
1. Download the image you want from https://developers.google.com/android/nexus/images . Extract it, extract the .zip file inside it too, and collect all of the .img files into one folder.
2. adb reboot bootloader (and wait until the bootloader comes up)
3. fastboot flash bootloader bootloader-mako-makoz30f.img (or whatever file has a similar name, if you got a different image than I did)
4. fastboot reboot-bootloader (and wait until the bootloader comes back up)
5. fastboot flash radio radio-mako-m9615a-cefwmazm-2.0.1701.04.img (or whatever file has a similar name, if you got a different image than I did)
6. fastboot reboot-bootloader (and wait until the bootloader comes back up)
7. fastboot flash boot boot.img
8. fastboot flash recovery recovery.img
9. fastboot flash system system.img
10. fastboot format cache
11. fastboot reboot
12. Don't panic unless you've seen the startup animation for at least 15 minutes without anything else happening.
I lost root, but I imagine re-custom-recoverying and re-rooting won't be any harder than the first time around.
Hi moriarty00,
I'm going to try the same procedure, thank you for posting this.
Can you confirm that your data and app are safe after the upgrade?
moriarty00 said:
Actually, I figured out what works! This was on a stock rooted device with stock recovery, but I bet it would work with custom recovery too. Instructions modified from https://pay.reddit.com/r/nexus4/comments/1qny3f/howto_update_your_stock_w_lte_nexus_4_without/ .
1. Download the image you want from https://developers.google.com/android/nexus/images . Extract it, extract the .zip file inside it too, and collect all of the .img files into one folder.
2. adb reboot bootloader (and wait until the bootloader comes up)
3. fastboot flash bootloader bootloader-mako-makoz30f.img (or whatever file has a similar name, if you got a different image than I did)
4. fastboot reboot-bootloader (and wait until the bootloader comes back up)
5. fastboot flash radio radio-mako-m9615a-cefwmazm-2.0.1701.04.img (or whatever file has a similar name, if you got a different image than I did)
6. fastboot reboot-bootloader (and wait until the bootloader comes back up)
7. fastboot flash boot boot.img
8. fastboot flash recovery recovery.img
9. fastboot flash system system.img
10. fastboot format cache
11. fastboot reboot
12. Don't panic unless you've seen the startup animation for at least 15 minutes without anything else happening.
I lost root, but I imagine re-custom-recoverying and re-rooting won't be any harder than the first time around.
Click to expand...
Click to collapse
Wow, a 12-step program
I simply rolled back my changes, and applying the OTA was as simple as pressing the "restart and install" button Here are some steps:
I used the app Flashify from Play Store to flash stock 4.4.4 recovery. I downloaded the stock factory image from google's own site (this one), used 7zip to extract the archives (tgz and tar), found "recovery.img" and transfered that to my phone. Then chose that file in Flashify.
Uninstalled all apps that made system changes, like Xposed framework and mods, BetterBatteryStats etc.
Removed Root with SuperSU cleanup function
Rebooted for good measure and apply OTA from notification - wait an hour or two for it to complete
Profit (do we still say that on the internet? Getting old here...)
I don't know if certain ways to get root will break the OTA. I used towel-root, and apparently SuperSU was able to undo that completely.
DrDruge said:
Hi moriarty00,
I'm going to try the same procedure, thank you for posting this.
Can you confirm that your data and app are safe after the upgrade?
Click to expand...
Click to collapse
Yup, perfectly safe! Just make sure not to flash other images, like userdata.img.
venu123 said:
OTA wants complete stock and obviously it doesn't think so about your phone. One option could be to back up to the cloud or some place outside the phone with TiBu (or whatever backup app you trust), then flash lollipop and try restore from TiBu. Another option would be to unroot (Supersu has an option to completely unroot), then retry.
Click to expand...
Click to collapse
If I unroot with Supersu how do I get root back?
moriarty00 said:
Yup, perfectly safe! Just make sure not to flash other images, like userdata.img.
Click to expand...
Click to collapse
Thank you!
Unfortunately the steps did not work for me, maybe I had some irreversible modifications or I had followed a different rooting procedure.
Or maybe I made a mistake in the upgrading steps.
Anyway, I had to flash the whole ROM and now everything is working fine.
Hey!
Basically I have similar problem with upgrading from 4.4.4 to 5.0 using OTA. Log from TWRP says:
Package expects build fingerprint of google/occam/mako:4.4.4/KTU84P/1227136:user/release-keys or google/occam/mako:5.0/LRX21T/1576899:user/release-keys; this device has google/occam/mako:4.3/JWR66V/737497:user/release-keys.
Click to expand...
Click to collapse
Phone has been rooted using Nexus Root Toolkit. And as long as there wouldn't be a problem with flashing using adb and wiping all data, there is one setback... My nexus is somehow broken. Communication via USB does not work, at all. Neither phone nor PC sees other device. Certified LG service centre nearby said that it is problem with main board, so generally repair is unprofitable.
So question is: How do I update to 5.0 and then root, without USB connection to my PC?
***For US LTE Tablet***
Here is a .zip you can flash to update to 5.0.1 from 5.0. The OTA was pulled from my device which I factory reset to 4.4.4. It will remove root and it will reflash the stock recovery, but it will NOT relock your bootloader. Make backups! Flash at your own risk! I am not responsible for any damage that occurs.
The reason why the new 5.0.1 OTA does not flash for rooted users is a sha1 hash is generated from the system partition. If it doesn't match what the hash should be from the factory, it fails out. Removing these checks will break your device because of the new differential update method employed, which is why these sha1 hashes are so important. The .zip I have is a standard update (not differential) and can be flashed with any recovery you want
Here is a link:
https://drive.google.com/file/d/0B_iRndxSfhpXRjBXY3FXUG1tNDA/view?usp=sharing
Thanks for your explanation! Any chance for providing the same zip for eu lte?
So is this a modified zip or is it just the full version from nvidia's server?
The rest of the world - LTE - version of the 5.0.1 update is here:
http://ota.nvidia.com/ota/rom/productionBL-droid-signed-wx_un_do-full_ota-29082_493.9700.zip
Flashed fine with ClockworkMod Recovery.
If you were rooted, you need to re-root afterwards.
any zip for wifi only tablet?
Adrixan said:
The rest of the world version of the 5.0.1 update is here:
http://ota.nvidia.com/ota/rom/productionBL-droid-signed-wx_un_do-full_ota-29082_493.9700.zip
Flashed fine with ClockworkMod Recovery.
If you were rooted, you need to re-root afterwards.
Click to expand...
Click to collapse
I need a little help how to flash via CWM and if i flash it will my data be erased? Plus how to reroot once i update? I have root and unlocked bootloader running 5.0
What do you have to do to root after installing this?
RollWii said:
I need a little help how to flash via CWM and if i flash it will my data be erased? Plus how to reroot once i update? I have root and unlocked bootloader running 5.0
Click to expand...
Click to collapse
It did not reset my tablet, just like an OTA update should.
You will lose root and the custom recovery though.
To get it back, just follow the fine guide in the forum again: http://forum.xda-developers.com/shield-tablet/development/recovery-cwm-recovery-nvidia-shield-t2848064
---------- Post added at 07:44 AM ---------- Previous post was at 07:43 AM ----------
TheCrowing said:
What do you have to do to root after installing this?
Click to expand...
Click to collapse
You just have to reinstall the custom recovery as detailed in the forum thread: http://forum.xda-developers.com/shield-tablet/development/recovery-cwm-recovery-nvidia-shield-t2848064 and from there flash SuperSU again.
Adrixan said:
It did not reset my tablet, just like an OTA update should.
You will lose root and the custom recovery though.
To get it back, just follow the fine guide in the forum again: http://forum.xda-developers.com/shield-tablet/development/recovery-cwm-recovery-nvidia-shield-t2848064
---------- Post added at 07:44 AM ---------- Previous post was at 07:43 AM ----------
You just have to reinstall the custom recovery as detailed in the forum thread: http://forum.xda-developers.com/shield-tablet/development/recovery-cwm-recovery-nvidia-shield-t2848064 and from there flash SuperSU again.
Click to expand...
Click to collapse
So basically all i need to do is
1) install cwm again since i updated to lollipop and have root
2) downlaod the update and install via cwm
3) reroot using the root.img etc etc and flash super su etc etc
4) reinstall cwm
Am i going the right path?
RollWii said:
So basically all i need to do is
1) install cwm again since i updated to lollipop and have root
2) downlaod the update and install via cwm
3) reroot using the root.img etc etc and flash super su etc etc
4) reinstall cwm
Am i going the right path?
Click to expand...
Click to collapse
What I did:
I WAS on 5.0 already! I don't know, if you can go directly from a KitKat release to 5.0.1!
1) Reboot recovery and flash zip like any other
2) Reboot normally, root will be lost. Don't restore root, when CWM asks you to.
3) reboot into fastboot mode
4) fastboot flash recovery recovery.img with the recovery.img from the thread, mentioned above
5) boot into recovery mode
6) flash the SuperSU update zip
7) reboot again, when cwm asks to fix root access, select yes this time
8) have a rooted shield on 5.0.1
Adrixan said:
What I did:
I WAS on 5.0 already! I don't know, if you can go directly from a KitKat release to 5.0.1!
1) Reboot recovery and flash zip like any other
2) Reboot normally, root will be lost. Don't restore root, when CWM asks you to.
3) reboot into fastboot mode
4) fastboot flash recovery recovery.img with the recovery.img from the thread, mentioned above
5) boot into recovery mode
6) flash the SuperSU update zip
7) reboot again, when cwm asks to fix root access, select yes this time
8) have a rooted shield on 5.0.1
Click to expand...
Click to collapse
Ok so its the same process like when i updated from kitkat to lollipop. One last question do i need to use the boot.img again?
RollWii said:
Ok so its the same process like when i updated from kitkat to lollipop. One last question do i need to use the boot.img again?
Click to expand...
Click to collapse
I never came into a situation, where i had to use some extra boot.img.
When I got my shield recently, I directly updated to 5.0 before rooting and only did the update to 5.0.1 with a previously rooted device.
So, I'd assume, if you are on 5.0 rooted, my instructions should work for you.
And careful, as mentioned above, my link is for the Rest of the world LTE version! (not us!)
Adrixan said:
I never came into a situation, where i had to use some extra boot.img.
When I got my shield recently, I directly updated to 5.0 before rooting and only did the update to 5.0.1 with a previously rooted device.
So, I'd assume, if you are on 5.0 rooted, my instructions should work for you.
And careful, as mentioned above, my link is for the Rest of the world LTE version! (not us!)
Click to expand...
Click to collapse
Oh good that you mentionedim using US Unlocked LTE so your file wont work on mine?
RollWii said:
Oh good that you mentionedim using US Unlocked LTE so your file wont work on mine?
Click to expand...
Click to collapse
No, but the File from the guy, who started this thread should work for the U.S. LTE version following the same instructions as I just gave.
How long should it be sitting at the NVIDIA screen after flashing the update?
It went after a couple minutes.
Adrixan said:
What I did:
I WAS on 5.0 already! I don't know, if you can go directly from a KitKat release to 5.0.1!
1) Reboot recovery and flash zip like any other
2) Reboot normally, root will be lost. Don't restore root, when CWM asks you to.
3) reboot into fastboot mode
4) fastboot flash recovery recovery.img with the recovery.img from the thread, mentioned above
5) boot into recovery mode
6) flash the SuperSU update zip
7) reboot again, when cwm asks to fix root access, select yes this time
8) have a rooted shield on 5.0.1
Click to expand...
Click to collapse
sorry but i forgot how to flash the SUperSU update.zip how and where can i find it again?
Here is a dedicated thread for Q&A and general info on OTA's for the Motorola Nexus 6. Please feel free to discuss all things OTA related and ask any questions you may have.
*Bootloader lock status has no effect on OTA pass or fail.*
To summarize, an OTA (Over The Air) is a software update pushed to nexus devices directly from Google. You will receive a notification when one is available for your device. The files are generally large in size and downloading via WiFi is recommended.
With Android 5.0 and up, OTA updating has changed significantly from previous versions. In the past, you could be stock, rooted, with stock recovery and OTA's would flash successfully. This is no longer possible in lollipop. Absolutely no system or kernel modifications can be present in order for the OTA to flash. This means that if you have unencrypted the stock kernel, the OTA will fail. The phone must be in a "out of box" state.
As always, you are not required to take the OTA as there are other options available. If you are already rooted, unlocked and using a custom recovery, you can use an updated custom ROM provided by the amazing development community here at XDA. Factory images are released by Google prior to OTA's being pushed out so most, if not all, of the custom ROMs are updated before you'll even see an OTA notification. Also, there are stock, rooted ROMs available as well.
*Factory images*
You can always update or return to stock via factory images direct from Google. Link to this guide provided in post #2
*Sideloading*
Another feature available to use is the sideload option. With the use of a few simple ADB commands, you can apply the OTA via sideload. Sideloading will require connecting to your PC and a working ADB/fastboot connection. Directions for sideloading are in post #3.
*Updating while rooted, unlocked, and having a custom recovery via fastboot*
This is quite simple with basic knowledge of fastboot/ADB. Download the factory image, extract the system image and flash with fastboot. Then flash TWRP and SuperSU again. You can also flash the boot image if desired. However if you are unencrypted, this will encrypt the device.
Many, MANY thanks to the development community, themers, modders and other talented people here at XDA.
Thanks @El Daddy for guidance and advice.
Helpful links:
*Please hit the thanks button for the OP's of the XDA threads below if the threads were helpful in any way.*
Beginners guide:
Thanks @xBeerdroiDx
http://forum.xda-developers.com/showthread.php?t=2948481
Setting up and using ADB and fastboot:
Thanks @rootSU
http://forum.xda-developers.com/showthread.php?t=3006500
Factory images installation instructions:
(Including the fastboot flash method for flashing individual images):
Thanks @Mr hOaX
http://forum.xda-developers.com/showthread.php?t=2954008
OTA files:
Thanks @oldblue910
http://forum.xda-developers.com/showthread.php?t=2906493
*For rooted/unlocked users only*
OTA zip files and radio files (TWRP flashable):
Thanks @Q9Nap
http://forum.xda-developers.com/showthread.php?t=3066052
Radio thread (fastboot flashable):
Thanks @zephiK
http://forum.xda-developers.com/showthread.php?t=2969380
Directions for sideloading
*These directions are based on Android SDK, Windows OS and a 100% stock Nexus 6*
This is just a simple, well known, user guide to using sideload.
Make sure your SDK is updated!
Download the OTA file to your PC, rename it to update.zip and transfer into the platform-tools folder of your SDK.
Connect your Nexus to your PC with your OEM USB cable.
Hold shift and right click on platform-tools folder and select open command prompt here.
Type: adb devices
If your serial number comes up, you are good to go. If not, check out your drivers in device manager. You may need to manually point your PC to their location. Also, you may need to uninstall any other Android drivers that are not associated with your Nexus.
Type: adb reboot bootloader
Select recovery mode from your phone using the volume down key. Once you've highlighted recovery mode, press power to select it.
It looks like a restart but the the dead android appears with red exclamation point. When that happens, hold power button and press volume up once.
Once in recovery, use the volume down key to select apply update from adb and push power to select it.
When your phone says now send file,
type: adb sideload update.zip
If all goes well, you'll see things progress and your Nexus will restart when complete. If you encounter the device not found error after beginning, unplug your USB and reconnect. I had to do it twice, but it works.
How do we install ota zip
if you are running stock you should be able to use wug toolkit and have it flash this zip file
What about stock-ish? I'm assuming since I'm rooted with my device unencrypted, that I can't flash this, right?
Flashing now. Will post back when done.
EDIT: Flash went perfect ^.^ 5.1 is all set.
knitler said:
Flashing now. Will post back when done.
EDIT: Flash went perfect ^.^ 5.1 is all set.
Click to expand...
Click to collapse
Were you completely stock?
Sent from my Nexus 6 using XDA Premium 4 mobile app
instructions for mac
http://www.androidcentral.com/how-manually-upgrade-your-nexus#slide5
I have a modded boot image and it failed to install. Guess ill have to nuke and start over to get this OTA in place.
http://www.androidpolice.com/2015/0...gs-android-5-1-ota-roundup-for-nexus-devices/ I just want to flash the radio but it looks line it's 20 MB bigger than the last
Is anyone creating a flashable zip that works with TWRP?
@oldblue910,
Thank you very much. ADB sideload went flawlessly (completely stock 5.0.1 of course).
I probably already know the answer but here is my situation... I am on the stock image but unlocked boot loader, rooted, and twrp recovery. The only way I can remain stock and not lose my current state other than root and a few apps that rely on root is to... Unroot, relock boot loader and put back stock recovery... Then OTA or side load? Theres no other option right?
I think I'm on the same situation as edif30
Stock image
rooted
unlocked bootloader
TWRP recovery
How can i sideload w/o losing root?
edif30 said:
I probably already know the answer but here is my situation... I am on the stock image but unlocked boot loader, rooted, and twrp recovery. The only way I can remain stock and not lose my current state other than root and a few apps that rely on root is to... Unroot, relock boot loader and put back stock recovery... Then OTA or side load? Theres no other option right?
Click to expand...
Click to collapse
You could flash the 5.0.1 factory image except for the userdata.img and radio.img and side load the OTA. Or you can wait for the 5.1 factory image and remove the "-w" from the flash-all script.
You will lose root and TWRP. but your data will remain intact.
So I'm all stock, unrooted, with a still-locked bootloader. I can flash the OTA without unlocking and without losing my data, right?
stevexyz0 said:
So I'm all stock, unrooted, with a still-locked bootloader. I can flash the OTA without unlocking and without losing my data, right?
Click to expand...
Click to collapse
Yep, just use ADB sideload.
So I had stock 5.0.1 with a custom kernel. I flashed the stock boot.img from the factory image using TWRP and I unrooted from in the SuperSU app, so I should be stock all around except for recovery. When I try to flash the OTA in TWRP it gives the following error message:
Package expects build fingerprint of google/shamu/shamu:5.0.1/LRX22C/1602158:user/release-keys or google/shamu/shamu:5.1/LMY47D/1743759:user/release-keys; this device has google/omni_shamu/shamu:5.0.2/LRX22G/dees_troy01130854:eng/test-keys.
Any idea why TWRP would think I was running 5.0.2?
cam30era said:
@oldblue910,
Thank you very much. ADB sideload went flawlessly (completely stock 5.0.1 of course).
Click to expand...
Click to collapse
Mine too but how long did it stay on the GOOGLE screen before booting?
This METHOD was developed ONLY for an UNLOCKED Motorola Droid Razr Maxx HD XT926m phone that is already updated to the last version of KitKat 4.4.2 (System version "183.46.15.XT926.Verizon.en.US").
IF YOU HAVE AN LOCKED BOOTLOADER AND TRY THIS METHOD IT WILL BE ONLY YOUR RESPONSABILITY IF YOU DAMAGE YOUR PHONE !!!
My Motorola XT926m had an UNLOCKED BOOTLOADER (ICS 4.0.4) and I flashed via RSD Lite the last stock firmware, "183.46.15"... After that, I was, of course, unhappy, because I read on different forums that this firmware version didn't support root... I tried to download the Hydrogen Peroxide xt926 application that others users recommended here on XDA forum, without success.
But now, after I applied this method, my phone is again rooted... Enjoy the steps, but be carefull, it was developed for XT926 phones with UNLOCKED BOOTLOADER!
1. Download the files "VZW_XT926_4.4.2-KDA20.62-10.1_CFC_1FF.xml" and "VZW_XT926_4.4.2-KDA20.62-15.1_CFC_1FF.xml" from the Motorola firmware site: "motofirmware.com/files/file/"...
2. Unpack the files...
3. Substitute/replace the "gpt", "tz" files (FROM the folder with "15.1" version TO the folder with "10.1" version)... You should replace all the files that "RSD Lite" will tell you that don't fit when you try to flash the new stock firmware. You will obtain a MODIFIED version of "183.46.10" stock KitKAt 4.4.2 firmware!!!
4. Flash this MODIFIED "10.1" firmware with "RSD Lite v6.1.5 Multi-Flash" (without using Rsd Script Generator.jar), but don't forget to remove the first two 'getvar' lines in the xml file.
5. Download and install the "Towel Root.apk" and root the phone...
6. Now your phone should be ROOTED.
What to do NEXT:
7.Download from the Play Store and install "Superuser.apk" made by ClockWordMode and after reboot the application will ask you to update SU binary. In my case, the SU binary didn't support an online update and I installed the "Superuser.zip" file downloaded from the ClockWorkMode site, via recovery method, in order to gain this update (you can do this as well, if you already have a TWRP or CWM recovery installed on your phone). With the other version of superuser, like "SuperSU.apk" or "Superuser.apk" ("eu.chainfire.supersu-2.apk", the last version, 5.6mb, for example) you will need to follow the same steps...
8. Using "Total Commander.apk", you can go to "File System root"/"Etc"/"installrecovery.sh", and finally rename this last file... Or you can use "ES3 File Explorer.apk" in order to rename the same "installrecovery.sh" file in "Device"/"Etc" folder (choose, for example, the name "installrecovery.shbak")...
9. Flash with "Flashify.apk" (downloaded form PLay Store) a new "recovery img.": "TWRP.img" (2.8.3.0) or "CWM.img" (6.0.4.8) for KitKat... You can find them on "rootjunkysdl.com/?device=Droid%20Razr%20HD&folder=Firmware"...
10. If you flashed "TWPR recovery.img" you will need to install "Stericson.busybox-1.apk" (from Play Store...), because TWRP works with this busy box... (You could install "TWRP.apk" as well, but you must be careful, because you will need to be able to boot into Recovery mode directly from your phone (with the combination key), not from this app... Many times, the phone is able to boot into recovery mode from TWRP application, but not from the bootloader... That's why it is better to uninstall TWRP application if you have this problem). If you flashed a "CWM.img" you can install "RomManager.apk".
11.Now it is the time to backup your system to SD card!
That's it. My phone was unlocked, and I didn't have any issue following all this steps... If you're locked don't try it.
But.. If you're locked you could instead use an application named 'Safestrap' for some purposes (read more here on XDA forum please), because is destinated for the phones with locked bootloader...
Hi ,
Since this is a guide it does not belong to XDA Assist
Please Read The Purpose of XDA Assist
Please Standby when Moderators Move the Thread To Your Device Specific Forum
RAZR HD General
jackeagle said:
Hi ,
Since this is a guide it does not belong to XDA Assist
Please Read The Purpose of XDA Assist
Please Standby when Moderators Move the Thread To Your Device Specific Forum
RAZR HD General
Click to expand...
Click to collapse
THANKS!
I know you took a lot of time to write this up, but there is a downgrade method posted on here already. Also, there is no need to rename recovery.sh. All you need to do after flashing recovery is power off the phone and immediately boot straight back into recovery so the install script completes.
To answer your question, no, you can't unlock .15.
RikRong said:
I know you took a lot of time to write this up, but there is a downgrade method posted on here already. Also, there is no need to rename recovery.sh. All you need to do after flashing recovery is power off the phone and immediately boot straight back into recovery so the install script completes.
To answer your question, no, you can't unlock .15.
Click to expand...
Click to collapse
Thank you, I wasn't able to find another downgrade method, could you give me the link, please?
http://forum.xda-developers.com/showthread.php?t=2789743
But... to flash CWM or TWRP for update the binaries, you need to be bootloader unlocked... to flash a custom recovery...
joel_sinbad said:
But... to flash CWM or TWRP for update the binaries, you need to be bootloader unlocked... to flash a custom recovery...
Click to expand...
Click to collapse
Correct. That's why this method is flawed and probably should be pulled before someone bricks their phone.
RikRong said:
Correct. That's why this method is flawed and probably should be pulled before someone bricks their phone.
Click to expand...
Click to collapse
Yeah, unfortunately this post makes no sense, I mean, if you accidently flash the gpt.bin, you're screwed... and so many risks, plus, you can't flash custom recovery, and you can maybe downgrade the system and boot, but you still can't downgrade the bootloader...
joel_sinbad said:
Yeah, unfortunately this post makes no sense, I mean, if you accidently flash the gpt.bin, you're screwed... and so many risks, plus, you can't flash custom recovery, and you can maybe downgrade the system and boot, but you still can't downgrade the bootloader...
Click to expand...
Click to collapse
This method is for an XT926 with UNLOCKED BOOTLOADER, with the last 183.46.15 update and the root access lost. I only described the steps that I already done with my phone. My Maxx HD is working and has root access again... I flashed custom recovery too (TWRP 2.8.3.0), I haven't any other problem.
RikRong said:
http://forum.xda-developers.com/showthread.php?t=2789743
Click to expand...
Click to collapse
Thank you, unfortunately is not working for the xt 926 phone that already took the last 183.46.15 update:
"..........************WARNING*************
this guide only works completely if you did NOT take the 183.46.15 update rolling out around 9/9/14 .............".
Until now I don't have any other option, I'm forced to preserve the method that I mentioned in my thread.
ciprianv. said:
Thank you, unfortunately is not working for the xt 926 phone that already took the last 183.46.15 update:
"..........************WARNING*************
this guide only works completely if you did NOT take the 183.46.15 update rolling out around 9/9/14 .............".
Until now I don't have any other option, I'm forced to preserve the method that I mentioned in my thread.
Click to expand...
Click to collapse
The piece you are referring to that doesn't work on .15 is the unlock and root. The downgrade should work on an unlocked phone.
That aside, your steps are very confusing and could easily cause a locked user to brick their phone. Please clarify or I will continue reporting this thread until it gets removed.
RikRong said:
The piece you are referring to that doesn't work on .15 is the unlock and root. The downgrade should work on an unlocked phone.
That aside, your steps are very confusing and could easily cause a locked user to brick their phone. Please clarify or I will continue reporting this thread until it gets removed.
Click to expand...
Click to collapse
I just edited the post. I clearly specified that this methid is ONLY FOR UNLOCKED BOOTLOADERS (XT926M).
ciprianv. said:
I just edited the post. I clearly specified that this methid is ONLY FOR UNLOCKED BOOTLOADERS (XT926M).
Click to expand...
Click to collapse
Thanks for doing that, I just want to make sure no one messes up their phone.