Hi there, how do I change the very first image that the S7 Slim displays when it is turned on?
Some mother****er decided to be funny and in a script I downloaded to install a recovery it changed the first image to some stupid image as well.
Related
Hello guys, I need help trying to get my boot animation that I downloaded to work. I rooted my device with kingroot and it works perfectly that my device is rooted correctly. I used the root browser and boot animations app by Jrummy or something like that then I grabbed a watchdogs bootanimation on the net named bootanimation.zip, it is has two parts and has the resolution of my s4 at&t i337. I installed the zip to data/local (didn't work) I checked the permission status and made sure they read rw-r-r. Then I installed it to system/media and that still didn't work. I realized that the boot animations were not being overwritten so I tried to rename the boot animation.zip to bootsamsung.qmg to replace the stock manafactuar boot animation and no luck. I searched everywhere on the Internet for a answer and they provided the same one that didn't work. If you guys want screenshots or the zip I can try to post it. But I would appreciate some help ASAP.
Have you tried deleting the original boot animation zip, leaving only the custom one?
This should not cause any serious problems.
The worst thing that can happen is that you will have a black screen (because the boot animation was deleted) during the boot process.
Stock firmware doesn't support .zip bootanimation. You need to convert manually the bootanimation into .qmg.
Sent from my ASUS_Z00A using XDA Labs
I just got my 64GB Aluminum Nexus 6P last night
I enrolled in the N developer preview and running it stock, to test it out, but I need root, and stuff. Couple questions;
- So how do I go about running the latest Developer 4 preview rooted ?
- Does Xposed work on the N Preview ?
Do I go about the normal method of unlocking the phone, rooting it, and installing TWRP first, and then flash an N ROM ? Or is there some specific radio, firmware or modem I need first before flashing an N ROM ?
No idea, but does Xposed even work on these N Previews ? I am guessing that's a NO, or slight maybe ? But then again Xposed needs a stable release of N released first with the source code, before Xposed can be made to work on it ?
PLEASE HELP:
Ok need a little help, I am following the excellent video by Rootjunky ( thank you ), and got through the unlocked bootloader part easily, and now installed TWRP Recovery, but upon first time booting into TWRP, it's just sitting at the Blue and Gray teamwin screen, and not doing anything else, it's not actually entering into the Recovery, to see the list of options, etc...
I powered the device down, and started up again in Fastboot mode, then chose Recovery, and does the same again, just sits at the blue gray colored teamwin screen, and does nothing.
What happened ?
UPDATE:
I powered the device down / off. Then started up again, it went and booted up, to the fresh clean Android N DP 4. But I am not rooted at all yet, due not being able to fully enter Recovery and flash the SuperSU zip yet.
Zorachus said:
PLEASE HELP:
Ok need a little help, I am following the excellent video by Rootjunky ( thank you ), and got through the unlocked bootloader part easily, and now installed TWRP Recovery, but upon first time booting into TWRP, it's just sitting at the Blue and Gray teamwin screen, and not doing anything else, it's not actually entering into the Recovery, to see the list of options, etc...
I powered the device down, and started up again in Fastboot mode, then chose Recovery, and does the same again, just sits at the blue gray colored teamwin screen, and does nothing.
What happened ?
UPDATE:
I powered the device down / off. Then started up again, it went and booted up, to the fresh clean Android N DP 4. But I am not rooted at all yet, due not being able to fully enter Recovery and flash the SuperSU zip yet.
Click to expand...
Click to collapse
Number one xposed will not work at all do not try
You need modified boot. Img for twrp to work thread is in general on here
Hi guys, I recently flashed tesla roms (thanks Ground Zero team) and I miss the stock Stitch boot animation. I couldnt find the 1440p version of it. Can anyone provide me the file or flashable zip. Thanks
felixtaf said:
Hi guys, I recently flashed tesla roms (thanks Ground Zero team) and I miss the stock Stitch boot animation. I couldnt find the 1440p version of it. Can anyone provide me the file or flashable zip. Thanks
Click to expand...
Click to collapse
This is the stitch boot logo. This is I repeat this is not a flashable zip.
Unzip and fastboot the logo.bin through fastboot.
Code:
fastboot flash logo logo.bin
fastboot reboot
Thanks. But I need the whole stitich boot animation
This is the one am talking about.
I found some but they are for low res screens.
felixtaf said:
Thanks. But I need the whole stitich boot animation
This is the one am talking about.
I found some but they are for low res screens.
Click to expand...
Click to collapse
There it go :good:
Stitch Animation
don't forget to set the right permissions to it
Thanks.
After setting the right permissions its not showing up. I set 0644, am i right? Shows moto logo and 5 sec pause and straight to main screen.
Deletion of original due to corruption
EDIT ----- Caution this upload may have been corrupted, use the one two posts on (#8)
This is the one I was looking for. But it fails in twrp wile flashing.
felixtaf said:
This is the one I was looking for. But it fails in twrp wile flashing.
Click to expand...
Click to collapse
@felixtaf ... Can't understand that because I installed it on my A2017U before posting. Which leads me to say that when I uploaded it to XDA it came up with a strange comment in red in the post (you've probably seen it -- Attachment 4136033) which I have never seen before. I can only suggest that the upload was corrupted so I have added another to this post.
Without wishing to teach you how to suck eggs can I just state the following ..... After downloading, transfer it to your ext sd card, in TWRP go to "Install" and chose the file, let TWRP do it's thing. I don't suggest you don't know what you are doing it's just so strange that it doesn't work.
Yes, this works fine. Thanks
Jus flashed it via twrp and all fine ...
The one I posted before was not a TWRP flashable file, you need to place it in system/media and replace the bootanimation.zip file there (and set the 0644 permission)
Hey.
Just installed TWRP from the guide on XDA (will post link later). Odin worked, everything was OK. Until I installed a ROM.
I have tried 4 different ROMs withone outcome - phone wont get past first boot screen - the one witn Samsung S-+ Powered by Android. No matter the minutes I wait, it just stays there. No Samsung logo as normal boot is displayed.
I can freely get to recovery or bootloader. But there is a problem - I dont know the precise string full model number after G955F*. Therefore I dont know what stock image or bootloader to choose.
My questions:
1. How to get back to working phone?
2. How to check the full model number in this situation?
TWRP works perfectly. Odin works. Just System wont boot...
Thanks in advance!
Tom
Hey
Can you delete this message because I made a mistake
Sorry
But I thinks you need to flash the right boot loader and try to install TWRP 3.1.1-2
So I recently rooted my Moto g5 Plus and made a custom boot animation for it. But when I replace my stock boot animation with my new one in system/media, when I go to view the .mp4 file it is the same as my stock animation, and whenever I boot the device, a series of black and white flashing lights just appear on the screen until the boot is finished. (I know how to fix this, I need help stopping the boot animation being replaced by stock.)
Anyone know how to stop the boot animation from being replaced by stock even though it is not stock? Thanks!
Same issue here. Stock Nougat + TWRP + Rooted. Able to hide N/A (unlocked bootloader) with the logo.bin. Can not replace boot animation. Tried Boot Animations for superuser from Google Play market, flashing with TWRP, replacement with Root Explorer. Default Moto animation still runs...
Is it possible to replace it at all? What method (including steps) 100% works?
It may be dm-verity doing this. You could install magisk and see if that prevents it from getting overwritten all the time.
NZedPred said:
It may be dm-verity doing this. You could install magisk and see if that prevents it from getting overwritten all the time.
Click to expand...
Click to collapse
Thank you. I've installed ElementalX Kernel and now boot animation is no longer overwritten.