Related
Getting a screen saying PwrReason: PWR_KEY_PRESS
Unlocked, was running Cyanogen7, wanted to go back to PiCrust. Was wiping battery stats, it took me out of the menu. I accidently went into some other menu and it formatted the phone... Partitioning or something?
Would like to get back to a working phone... I can get into RSD protocol, Fastboot. Recovery spits out an error.
Getting myself the fastboot/RSDLite/drivers again...
Any other guidance would be greatly appreciated...
1) Download CWM, either ROM Manager one (http://download.clockworkmod.com/recoveries/recovery-clockwork-5.0.2.0-olympus.img) or the romracer one on XDA, either will work
2) Download a ROM
3) boot in fastboot, fastboot flash recovery [the recovery you downloaded]
4) boot in recovery, wipe data and flash a ROM
w00t. almost my plan. I don't have an external card. So already got romracer flashed, but, i think, i'll have to fastboot the 4.5.91 stock rom....so it can format and setup my internal SD card. Then go to picrust. Shame I lost my Pi and Cy7 backups....
edit:
Whew. I thought i had lost everything on the internal sdcard. Once i got romracers cWM back on. and after it failed to flash 4.5.91, i looked around in CWM and was able to see my internal SDCard. Restored my Cy7 for now. My touchscreen was off, but I had backed up my PDS partition a long time ago, flashed that and it was working again.
Now the only "problem" is, on boot, I dont get the Motorola Logo. I instead get a command line style interface. It autoboots to OS in 5s, unless I pick something from the list (RSD,Fastboot,etcetc) Not a HUGE deal, but I hate seeing POSTs on my PCs, so I'd like to get that logo back..or if possible a custom logo?? Any ideas on that?
I have exactly the same problem, could you repair it?? I need to take my phone to de RMA and I have this, I dont know what to do. If you ydgmms or somebody else could give me some help it would be great.
Edit:I could just have installed a recovery but still getting the black screen with the letters.
I leave a screenshot.
santix93 said:
I have exactly the same problem, could you repair it?? I need to take my phone to de RMA and I have this, I dont know what to do. If you ydgmms or somebody else could give me some help it would be great.
Edit:I could just have installed a recovery but still getting the black screen with the letters.
I leave a screenshot.
Click to expand...
Click to collapse
I have the same problem!!!!!!
I was wiping ?? data...i think i entered a wrong selection...pheraps we have partitioned the internal sd......what can we do????
msin84 said:
I have the same problem!!!!!!
I was wiping ?? data...i think i entered a wrong selection...pheraps we have partitioned the internal sd......what can we do????
Click to expand...
Click to collapse
That's exactly what you did..
Not to worry, here you go! http://forum.xda-developers.com/showthread.php?t=1131649
;-)
P. S. I've "fried" my phone a couple of times since I got it, this one though I thought it was done. Took me 7 hours to figure out / repair. Good luck, it's fairly straight forward with the instructions in the thread.
And i also have this problem....http://forum.xda-developers.com/showthread.php?t=1212851
Ok i accidentally partitioned the internal memory
It looks like i need to restore the PSD (what is...??)...but of course i've not backed it up....!!!
Is there anyone that can help me.....??????????
Now i go to sleep....after 2 hours with deep troubles...!
Do you read what it says on posts before yours or do you just type your question & come back hoping for answers..?
msin84 said:
And i also have this problem....http://forum.xda-developers.com/showthread.php?t=1212851
Ok i accidentally partitioned the internal memory
It looks like i need to restore the PSD (what is...??)...but of course i've not backed it up....!!!
Is there anyone that can help me.....??????????
Now i go to sleep....after 2 hours with deep troubles...!
Click to expand...
Click to collapse
Ok...after a lot of pain i was able to solve the problem by flashing the engineering PSD!!!
Now when i power on the phone i also read the hw revision and made date....but i was not able to show the motorola logo...damn....
---------- Post added at 11:15 PM ---------- Previous post was at 10:50 PM ----------
Vangelis13 said:
Do you read what it says on posts before yours or do you just type your question & come back hoping for answers..?
Click to expand...
Click to collapse
Sorry, i was very confused before...full panic (i was thinking to have a 500€ brick)!
THANKS A LOT FOR YOUR 100% WORKING SOLUTION!
Yes i read, it's the same post!
I read through the forum other users experienced both the problems togheter (post on boot and screen alignment issue).
Now i'm not able to set the moto logo instead of the post...!
msin84 said:
Ok...after a lot of pain i was able to solve the problem by flashing the engineering PSD!!!
Now when i power on the phone i also read the hw revision and made date....but i was not able to show the motorola logo...damn....
---------- Post added at 11:15 PM ---------- Previous post was at 10:50 PM ----------
Sorry, i was very confused before...full panic (i was thinking to have a 500€ brick)!
THANKS A LOT FOR YOUR 100% WORKING SOLUTION!
Yes i read, it's the same post!
I read through the forum other users experienced both the problems togheter (post on boot and screen alignment issue).
Now i'm not able to set the moto logo instead of the post...!
Click to expand...
Click to collapse
Were you able to find a fix to restore the red moto logo?
Thanks,
Bruno
Hey all there,
i just bought for some cheap money a milestone 2 on the bay with bootloop problems.
it startsup like this:
just power on with the power button:
red m logo, after some seconds it turns for about a half second to a black screen, again red m logo, and again and again and again
enter the bootloader works fine - 70.13
enter the system recovery works on charger, wiping out didn't help
flashing with rsd lite worked, but didn't change the situation with the bootloop. even after flashing, and wipe out after that.
i'm using windows 7 32bit and x64 on another computer in combination with rsd-lite 5.6
with rsd-lite 4.9 or earlier my device isn't recognized. admin and compitibility is on at all versions of rsd-lite.
anone an idea how to get this stone working again?
i'm a little confused, cause i saw so many posts, of people getting the stone back after flashing with rsd...hmm any help is pleased
greetz
Download rom GingerBread of UK
http://www.multiupload.com/TUZHXCGLMZ
Flash with RSD Lite 5.6... reboot
make wipes (POWER and X....... Vol + and Vol -)... reboot
has to boot normally ...
Just tried several versions of firmware. nothing did work.
i'm thinking about getting the 70.13 bootloader file and flash the bootloader once more.
or give it a try and flash the phone with an update.zip over recovery mode.
but first problem is: i don't have the booloader and the only mirror was megaload, at second i don't have any oem update.zip files. well i will look forward. can't understand why the phone is still looping.
would be happy about any other good suggestions.
greetz
Bootloader 70.13
thanks a lot for the bootloader, but did not help. still bootloop.
now i tried all german, DACH, UK GB fimware.
always rebooting and wiping.
Tha phone is still in bootloop.
May be an OEM update.zip could help. i still got access to the recovery mode.
is it possible to boot from the recovery mode into openrecovery, when the bootloader is original? don't think so, but will try that now.
still happy about an help here.
greetz
MKSilver said:
thanks a lot for the bootloader, but did not help. still bootloop.
now i tried all german, DACH, UK GB fimware.
always rebooting and wiping.
Tha phone is still in bootloop.
May be an OEM update.zip could help. i still got access to the recovery mode.
is it possible to boot from the recovery mode into openrecovery, when the bootloader is original? don't think so, but will try that now.
still happy about an help here.
greetz
Click to expand...
Click to collapse
Don't use a 2 ou 2.2 android..I think it's on GB so you can't downgrade..
Charge your battery to 100%
Folow the step here with a 2.3.4 SBF take here
Have a nice day.
Hey all there,
i already tried to flash GB 2.3.4 Firmware for: Germany, DACH, UK - didn't work out.
of course i did a wipe after installing.
also i tried a rebuilt by renaming CG66.img into CG37img - didn't work out.
just saw, that when i rebuilt the firmware after changing cg66.img to cg37.img, the cg37.img file doesn't appear in the new built SBF.
any reason for that? hmm...
while depacking and rebuilt a SBF i saw, that the RAMDLD.img (ramdownloader) in the 2.3.4 GB DE retail SBF is in version 70.12. i'm no expert in built SBF files, just did this the first time, but could this have an incompatibility with the 70.13 bootloader?
well cause the phone was quite cheap, i will go on trying. may be some more of you guys have any ideas.
the standing now is:
reflash 70.13 bootloader - didn't work out,
flash any 2.3.4 GB SBF and wiping out data after flash - didn't work out
flash update.zip from recovery mode - haven't tried yet - need update.zip file or instruction how to built one.
the last point is my next step i think. i will now go reading how to get this manage.
any help is welcome!
greetz
Okay just learned, that flashing an update.zip with system recovery, doesn't erase any data on the phone, so will look forward, trying flash the phone with sbf under linux live cd.
may be this will help.
does anyone of you know some hardware testing tools for the milestone 2?
to test the ram/rom hardware...
i'm starting to think, that some of the hardware chips may be damaged.
hmm i always thought, that it is not possible to brick a stone with original bootloader/rom-image/firmware. just starting to learn, that it is possible although.
any help is welcome guys! my ideas are going to end.
greetz
Got still no luck and tried to flash it with sfb about 16 times now. RSD-Lite tells me it was everything okay, but still bootloop.
Any good ideas?
Greetz
You have no real idea of the phones history, so you may have to accept the possibilty that it could be a hardware issue. Perhaps it has taken some water damage (the indicators do not always end up going off btw - I fell into a pool fully clothed and the nokia i had at the time wouldn't ever recognize a sim again, yet no water damage indicators get wet somehow . Yet the rest was soaking)
---------- Post added at 10:20 AM ---------- Previous post was at 10:16 AM ----------
A thought occurs.... does it actually have a sim card slot? Like... is it possibly a Droid 2? :S
---------- Post added at 10:25 AM ---------- Previous post was at 10:20 AM ----------
Mikevhl said:
I know it's a bit extreme to do, but it might help for you. Try installing ubuntu or wubi, then use sbf_flash on ubuntu. It takes some time, but if you REALLY need to SBF you should give it a try. Usage is:
chmod 777 sbf_flash
./sbf_flash /path/to/sbf/file
Click to expand...
Click to collapse
Got that from the recovery thread.
I dug up this guide to using ubuntu live cd to flash sbf's for the droid 2, hopefully you are switched on enough to workout what you need to do differently for the MS2
http://forum.xda-developers.com/showthread.php?t=804088
I'd try that and see what happen
Hey guys,
first: thx to DreadPirateDan. you're right, i don't know enough about the phone. So i sat down after work and startet to read and with all the basic information i know about the phone. While analysing all the things i just saw a special thing in the bootloader:
When the phone is switched on into bootloader, the screen shows:
"Bootloader Fastboot mode
70.13
Battery OK
OK to Program
Transfer Mode:
USB"
So it seems that i've got the fastboot script active. So i should do everything with the phone i want to do, right?
i will go on reading. maybe i will find any way to check all the files.
Is it possible, that the phone loops because of fastboot mode and a secret saftyissue which bans all phones booting with active fastboot?
May any of u check on a not rooted and for difference rooted milestone 2, if the fastboot notify is standard?
Btw - got a Sim-Slot, so it seems to be a Milestone 2.
greetz
This ones a long shot - but if you have another USB cable available, try using that. Perhaps the one you are using is somewhat damaged - not enough to cause errors flashing, but enough to corrupt data? I don't know but i'd certainly give it a try! .
---------- Post added at 08:00 AM ---------- Previous post was at 07:59 AM ----------
Yeah that's the screen of bootloader saying it's all sweet to flash with rsd-lite
So that's a good sign
I'm concerned perhaps it's had some physical damage to the system storage.
I'm just confused, your steps appear to be all correct, what you've done allready, and it should have worked allready!
How did u get into Bootloader Fastboot mode???
Are you sure it says 'Fastboot' coz Fastboot could mean unlockable bootloader?
May be some developer could throw some more light on this.
When we first got the Chinese GB link I remember there were a couple of guys who had deceloper phones.. They never explained how they'd got them though lol
Sent from my MotoA953 using xda premium
Fastboot confirmed
Hey Guys,
well its definitly Fastboot. I installed Android SDK yesterday and tested a little bit.
I can flash images through fastboot and all those things.
Poblem is, i'm not so familiar with all those things. I know a little bit of electronics but not so much about how software and specially android works with the hardware. Just started yesterday to read about this.
Attached are some pics of my phone during bootloader and how it looks.
Now it would be first nice, to get this thing work!
Because at the moment it hangs still during booting, cause i don't know so much about how to flash from fastboot.
When it is true, that this could help this forum here, i won't sell it anymore. But i need help to work all this out.
I contated parallely the customer service of motorola at my country, to ask, if this device has still waranty via IMEI, but they don't have this IMEI in their database.
So come on guys, more information, how get the phone work again, may be with any rom we wish someday without hacking anything
greetz
I have the same problem. tried to bootstrap after ive installed cyanogen 7 and now im stuck on the M logo. wiping cache or factory reset won't work
thing is the links for sbf files at and-developers won't work :\ so now i cant flash anything
plz help
Alot of file sharing stuff got shut down just recently that's why all the links are dead
if you had previously upgraded to gingerbread, that is your problem - cm7 doesn't work with it. Have a crack at the dowgrade method endless7 has and then you can flash cm7 with CWM.
ok, i figured it out. just searched google for one of the builds. flashed it and it turned out to be a french retail version of froyo. installed MIUI rom. works fine
I maybe resurrecting this but I need help. I got my milestone 2 yesterday and then I rooted it successfully and then I tried to use ClockworkMod (Rom Manger mainly) to flash CM7. and well my phone is stuck in a boot loop now. It starts with a red M logo and then it goes to the CM android sliding in and the circle spinning then freezing and going again. I can only get into bootloader mode and when ever I plug my phone into my computer to use RSD it says chip error 43. I can't even find an SBF for my phone since all the links where to Megaupload. Please help
EDIT:
Okay so I just used the newest version of RSD and got a SBF for my phone but still the same thing happened. This time RSD kept on going and the CM android did what it was doing before.
Nikunj3xP said:
I maybe resurrecting this but I need help. I got my milestone 2 yesterday and then I rooted it successfully and then I tried to use ClockworkMod (Rom Manger mainly) to flash CM7. and well my phone is stuck in a boot loop now. It starts with a red M logo and then it goes to the CM android sliding in and the circle spinning then freezing and going again. I can only get into bootloader mode and when ever I plug my phone into my computer to use RSD it says chip error 43. I can't even find an SBF for my phone since all the links where to Megaupload. Please help
EDIT:
Okay so I just used the newest version of RSD and got a SBF for my phone but still the same thing happened. This time RSD kept on going and the CM android did what it was doing before.
Click to expand...
Click to collapse
hi,
Can you please explain clearly if you are able to boot CWM recovery or are you just getting a boot loop and unable to boot to recovery? As far as I know you won't be able to flash clockwork mod recovery for the Milestone 2 using ROMManager .You need to use Droid 2 bootstrap recovery.
I hate to use the term "brick" because people here sometimes get their panties in a twist when that term is used, but that's kind of how it seems to me. Currently all I can get to is fastboot. It says the device is locked and then says:
Downgraded security version
update gpt_main version failed
failed to hab check for gpt_backup: 0x35
failed to load gpt
CID read failure
Invalid CID status 0x69
I've tried holding vol up, vol down and power, then releasing power while holding vol up and vol down. It got me right back to where I am.
If it helps, I got here by messing with some settings on the phone and somehow disabling all voice functionality on my phone. Data still worked, but not voice. I figured since I had messed it up, I would factory reset. This fixed that problem. Then I went into TB and restored my system data and apps. The phone then got stuck at the boot screen. I figured I'd go into recovery, wipe again and restore just the apps this time. When I did that, the phone got stuck in it's current status. I fired up the Razr M utility that's out there (w/the Batman logo) and tried to re-flash stock recovery and the stock rom. Both failed claiming my partition is bad. I'm not sure where to go here or I've permanently broken the device. The bootloader is unlocked if that helps at all.
try this? or House of Moto utility at droidrzr.com
A. Nonymous said:
I hate to use the term "brick" because people here sometimes get their panties in a twist when that term is used, but that's kind of how it seems to me. Currently all I can get to is fastboot. It says the device is locked and then says:
Downgraded security version
update gpt_main version failed
failed to hab check for gpt_backup: 0x35
failed to load gpt
CID read failure
Invalid CID status 0x69
I've tried holding vol up, vol down and power, then releasing power while holding vol up and vol down. It got me right back to where I am.
If it helps, I got here by messing with some settings on the phone and somehow disabling all voice functionality on my phone. Data still worked, but not voice. I figured since I had messed it up, I would factory reset. This fixed that problem. Then I went into TB and restored my system data and apps. The phone then got stuck at the boot screen. I figured I'd go into recovery, wipe again and restore just the apps this time. When I did that, the phone got stuck in it's current status. I fired up the Razr M utility that's out there (w/the Batman logo) and tried to re-flash stock recovery and the stock rom. Both failed claiming my partition is bad. I'm not sure where to go here or I've permanently broken the device. The bootloader is unlocked if that helps at all.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2526311 same as this?
jimyv said:
http://forum.xda-developers.com/showthread.php?t=2526311 same as this?
Click to expand...
Click to collapse
Same thing. Getting the "failed no such partition" errors as well.
try
A. Nonymous said:
Same thing. Getting the "failed no such partition" errors as well.
Click to expand...
Click to collapse
grab this VRZ_XT907_9.8.1Q-94-1_CFC.xml at http://sbf.droid-developers.org/ exract it. grab this http://www.mediafire.com/download/tq09cpqupvo4fdq/HouseOfMoto-xt907.zip . extract all. grab this only FULL_xt907..out of/ rsd_scripts / folder drop in ur extracted sbf file open RSD lit v 6.1.5 . navigate to the script u dropped inside ur extracted sbf file add select the FULL_xt907 script udropped and run..fixed mine not my work just made a luck guess combination that worked for me...thank House of Moto guy for script over at droidrzr.com
jimyv said:
grab this VRZ_XT907_9.8.1Q-94-1_CFC.xml at http://sbf.droid-developers.org/ exract it. grab this http://www.mediafire.com/download/tq09cpqupvo4fdq/HouseOfMoto-xt907.zip . extract all. grab this only FULL_xt907..out of/ rsd_scripts / folder drop in ur extracted sbf file open RSD lit v 6.1.5 . navigate to the script u dropped inside ur extracted sbf file add select the FULL_xt907 script udropped and run..fixed mine not my work just made a luck guess combination that worked for me...thank House of Moto guy for script over at droidrzr.com
Click to expand...
Click to collapse
I'm at work and don't have adb setup on my computer here so I'll do that when I get home. I'll let you know if it works. I've been rocking my original DInc (which has some sort of usb bug that I need to fix in it) all day and having just 3g is kind of killing me. Not gonna lie.
I'll add
A. Nonymous said:
I'm at work and don't have adb setup on my computer here so I'll do that when I get home. I'll let you know if it works. I've been rocking my original DInc (which has some sort of usb bug that I need to fix in it) all day and having just 3g is kind of killing me. Not gonna lie.
Click to expand...
Click to collapse
I used the RSD lite that is in the Houseof Moto http://www.droidrzr.com/index.php/topic/28162-house-of-moto/ All thanks it his WORK/ extract it all and go to HouseOfMoto_1.4/HouseOfMoto/rsd/SDL/ run that one I don't know if theres goodies in threr that help or what but it worked for me that way only...of course have drivers installed / I didn't need adb setup just make sure ur run as administrater
Many thanks. That totally worked. Was easier than I thought it would be too. Had a hard time finding the gui for rsd and couldn't find a way to point the cli at the right file, but that was probably user error. Once I found the GUI, it worked just fine. Kudos to you. I'm impressed.
Deperation
A. Nonymous said:
Many thanks. That totally worked. Was easier than I thought it would be too. Had a hard time finding the gui for rsd and couldn't find a way to point the cli at the right file, but that was probably user error. Once I found the GUI, it worked just fine. Kudos to you. I'm impressed.
Click to expand...
Click to collapse
No problem glad it worked for u also.. I just got lucky after few days sweating the battery count down before I had to buy adapter it was stuck in ap boot only stating locked device pus same errors as urs no recovery no nothing no flashy nothing even my phone guy gave up after 3 hrs. five xt912s later and one blue wifey razr M you would think I would have one but sadly no. I moved on to sch1545 ver. s4 and rusty at the moto work ,but I refuse to ins.claim on an oops I fd up . I was bout to send her phone shopping went something worked . did a lil dance and handed her phone back ..with 4 present battery.she perfered it that way cuz new moto products ,,,GOOGLE [products] don't support sd cards anymore so was going ti Sammy it up ..but she loves her freaking blue razr. thanks for the thanks happy to assist u with my dumb luck lol...like I said I hit right combo of someone elses work..SamuriHL over at droidrzr.com thank him over there.. for work on HouseOfMoto.
---------- Post added at 08:31 AM ---------- Previous post was at 08:05 AM ----------
jimyv said:
No problem glad it worked for u also.. I just got lucky after few days sweating the battery count down before I had to buy adapter it was stuck in ap boot only stating locked device pus same errors as urs no recovery no nothing no flashy nothing even my phone guy gave up after 3 hrs. five xt912s later and one blue wifey razr M you would think I would have one but sadly no. I moved on to sch1545 ver. s4 and rusty at the moto work ,but I refuse to ins.claim on an oops I fd up . I was bout to send her phone shopping went something worked . did a lil dance and handed her phone back ..with 4 present battery.she perfered it that way cuz new moto products ,,,GOOGLE [products] don't support sd cards anymore so was going ti Sammy it up ..but she loves her freaking blue razr. thanks for the thanks happy to assist u with my dumb luck lol...like I said I hit right combo of someone elses work..SamuriHL over at droidrzr.com thank him over there.. for work on HouseOfMoto.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2526311 should help him aslo
Only problem I've got now is that I lost root in the process and got upgraded to 4.1.2 so the Motochopper root exploit doesn't seem to work. The bootloader is still unlocked so I'm guessing I might be able to flash something. I tried flashing the stock recovery and stock image from the Razr M utility, but that didn't seem to allow me to root. Any ideas?
A. Nonymous said:
Only problem I've got now is that I lost root in the process and got upgraded to 4.1.2 so the Motochopper root exploit doesn't seem to work. The bootloader is still unlocked so I'm guessing I might be able to flash something. I tried flashing the stock recovery and stock image from the Razr M utility, but that didn't seem to allow me to root. Any ideas?
Click to expand...
Click to collapse
just use matts 1.20 .root it and ota on up to current useing voodoo ota root keeper each step and restoring root and rebooting each step worked for me
---------- Post added at 11:58 AM ---------- Previous post was at 11:44 AM ----------
http://forum.xda-developers.com/showthread.php?t=2249773
---------- Post added at 12:06 PM ---------- Previous post was at 11:58 AM ----------
http://forum.xda-developers.com/showthread.php?t=2249773
That's what I've been using. The text based app w/the batman logo. I tried the motochopper exploit (option 5). It failed. I tried option 2, then option 1. It bricked the phone. Had to boot into the recovery partition to fix it and let stock recovery run which gave me a phone I couldn't root. I'll try it again though.
Never mind. Second try worked.
jimyv said:
just use matts 1.20 .root it and ota on up to current useing voodoo ota root keeper each step and restoring root and rebooting each step worked for me
---------- Post added at 11:58 AM ---------- Previous post was at 11:44 AM ----------
http://forum.xda-developers.com/showthread.php?t=2249773
---------- Post added at 12:06 PM ---------- Previous post was at 11:58 AM ----------
http://forum.xda-developers.com/showthread.php?t=2249773
Click to expand...
Click to collapse
I can verify this, it does work.
Matts 1.20 utility works 100%!
Sent from my Nexus 7 using XDA Premium 4 mobile app
Hi,
My Mediatek Micromax Canvas Knight A350 is totally dead. Not responding at all to any buttons. No lights or battery indicator is displayed. But some warmth can be felt on the phone.
When I connect the phone to the pc with a USB cable it is detected as MTK USB Port Comxxxx
But when I use SP flash tools to download the preloader...it does nothing. Please let me know what to do...Thanks and God bless you.
Frank Morris said:
Hi,
My Mediatek Micromax Canvas Knight A350 is totally dead. Not responding at all to any buttons. No lights or battery indicator is displayed. But some warmth can be felt on the phone.
When I connect the phone to the pc with a USB cable it is detected as MTK USB Port Comxxxx
But when I use SP flash tools to download the preloader...it does nothing. Please let me know what to do...Thanks and God bless you.
Click to expand...
Click to collapse
when connecting in sp tools, press volume down button and see if the preloader starts.....mine worked this way
harvir46 said:
when connecting in sp tools, press volume down button and see if the preloader starts.....mine worked this way
Click to expand...
Click to collapse
I tried it but did not worked. when i open device and printer, i can see DA USB VCOM PORT when battery is in and MTK USB PORT when battery is removed, i guess i should see preloader but that is not happening. when i connect karbonn without battery then i see preloader there and flashing get completed successfully.
Please help my phone is not charging, power buttons also not working, Tried to hard reset by pressing power button, volume up and down simultaneously but still phone does not respond.
I request members to help. i am trying from last 15 days.
raghubar said:
I tried it but did not worked. when i open device and printer, i can see DA USB VCOM PORT when battery is in and MTK USB PORT when battery is removed, i guess i should see preloader but that is not happening. when i connect karbonn without battery then i see preloader there and flashing get completed successfully.
Please help my phone is not charging, power buttons also not working, Tried to hard reset by pressing power button, volume up and down simultaneously but still phone does not respond.
I request members to help. i am trying from last 15 days.
Click to expand...
Click to collapse
Sorry but this thread limits to A350 only.
---------- Post added at 07:55 PM ---------- Previous post was at 07:50 PM ----------
Frank Morris said:
Hi,
My Mediatek Micromax Canvas Knight A350 is totally dead. Not responding at all to any buttons. No lights or battery indicator is displayed. But some warmth can be felt on the phone.
When I connect the phone to the pc with a USB cable it is detected as MTK USB Port Comxxxx
But when I use SP flash tools to download the preloader...it does nothing. Please let me know what to do...Thanks and God bless you.
Click to expand...
Click to collapse
Using SP Flash Tool, flash the preloader.bin first.Use meta mode if not detected,all three buttons together while connecting and keep pressed until flashing starts.
If flashing was successful then your phone should at least be able to vibrate when you press the power button or boot if the correct files are present on your phone; else, flash other necessary files to make the phone boot up and start working normally again.
P.s. writing again and again is painful as I'm lazy-ass.
I'm thinking of making a thread about this but again,I'm lazy-ass.
it worked...wow...thanks ...but now it gets into a boot loop
harvir46 said:
when connecting in sp tools, press volume down button and see if the preloader starts.....mine worked this way
Click to expand...
Click to collapse
Thanks buddy, the phone started but now it ends into a bootloop. Tried getting into custom recovery and doing a factory reset. It starts and goes all the way through and finally restarts and the same thing again...bootloop....Please suggest what should I do...Thanks and God bless.
In the meanwhile i tried flashing a new custom ROM from xdafirmware.com. But the SP flash tools downloads upto 9.86MB and then the download stops...What could be the reason? Also please let me know if Miracle Box is any kind of solution for these kind of problems! Thanks and God bless.
Mr.Ak said:
Sorry but this thread limits to A350 only.
---------- Post added at 07:55 PM ---------- Previous post was at 07:50 PM ----------
Using SP Flash Tool, flash the preloader.bin first.Use meta mode if not detected,all three buttons together while connecting and keep pressed until flashing starts.
If flashing was successful then your phone should at least be able to vibrate when you press the power button or boot if the correct files are present on your phone; else, flash other necessary files to make the phone boot up and start working normally again.
P.s. writing again and again is painful as I'm lazy-ass.
I'm thinking of making a thread about this but again,I'm lazy-ass.
Click to expand...
Click to collapse
I am also talking about Micromax A350 and i am facing same problem
as written by thread creator.Please help me, all things mentioned in this thread i tried but none worked.
Please tell whether i should do all these step with battery or without battery.
Frank Morris said:
Thanks buddy, the phone started but now it ends into a bootloop. Tried getting into custom recovery and doing a factory reset. It starts and goes all the way through and finally restarts and the same thing again...bootloop....Please suggest what should I do...Thanks and God bless.
In the meanwhile i tried flashing a new custom ROM from xdafirmware.com. But the SP flash tools downloads upto 9.86MB and then the download stops...What could be the reason? Also please let me know if Miracle Box is any kind of solution for these kind of problems! Thanks and God bless.
Click to expand...
Click to collapse
What did you actually do?
What caused bootloop if full v3 rom was actually flashed?
Also,there's no custom roms on xdafrimware.com,it's only stock roms and make sure whatever you flash is for A350 only!
You can find everything on our blog:
www.canvasknightroms.blogspot.in
Good luck!
---------- Post added at 03:34 PM ---------- Previous post was at 03:32 PM ----------
raghubar said:
I am also talking about Micromax A350 and i am facing same problem
as written by thread creator.Please help me, all things mentioned in this thread i tried but none worked.
Please tell whether i should do all these step with battery or without battery.
Click to expand...
Click to collapse
Do you even know A350's battery is non-removable?
The only way you can remove it is by disassembling the device but doing that will compromise with your battery life.It should only be used in worst case scenario and everything else fails to work!
Mr.Ak said:
What did you actually do?
What caused bootloop if full v3 rom was actually flashed?
Also,there's no custom roms on xdafrimware.com,it's only stock roms and make sure whatever you flash is for A350 only!
You can find everything on our blog:
Good luck!
First of all, I apologize for my mistake. It was not a custom ROM but a Canvas Knight Stock ROM... The file name is this...Micromax_A350_V2_040614_KitKat_(by_xdafirmware.com). It's a version 2 (unmerged storage). However, earlier I had flashed a version 3 (merged storage) ROM and since it was constantly giving me trouble I tried to reflash version 2 ROM...But unable to do so...it gets stuck at 9.6MB or 0% in the SP Flash tool.
I tried the format+download option too. But in vain. Guess I am doing something wrong! What could it be? Thanks and God bless.
Btw, I have been through your blog in the past and benefited from the same. Thanks
Click to expand...
Click to collapse
Frank Morris said:
Mr.Ak said:
What did you actually do?
What caused bootloop if full v3 rom was actually flashed?
Also,there's no custom roms on xdafrimware.com,it's only stock roms and make sure whatever you flash is for A350 only!
You can find everything on our blog:
Good luck!
First of all, I apologize for my mistake. It was not a custom ROM but a Canvas Knight Stock ROM... The file name is this...Micromax_A350_V2_040614_KitKat_(by_xdafirmware.com). It's a version 2 (unmerged storage). However, earlier I had flashed a version 3 (merged storage) ROM and since it was constantly giving me trouble I tried to reflash version 2 ROM...But unable to do so...it gets stuck at 9.6MB or 0% in the SP Flash tool.
I tried the format+download option too. But in vain. Guess I am doing something wrong! What could it be? Thanks and God bless.
Btw, I have been through your blog in the past and benefited from the same. Thanks
Click to expand...
Click to collapse
What was the problem with v3?
Click to expand...
Click to collapse
Version 3 problem...
Mr.Ak said:
What was the problem with v3?
Click to expand...
Click to collapse
Version 3 booted well the first time...it went all the way...i was setting it up nicely...and it hung and just stopped. Ever since then I tried to reboot it would not load...the Canvas Knight logo with the sound would come on and then restart or get hung at that point. In short, it would not fully boot anymore except for that once!
So I decided to do away with version 3 and thought version 2 would be fine because that's what was originally on my phone...but now this is the problem...i mean the SPFT gets hung at 0%.
Thanks and God bless you.
On a different note, I would still love to have version 3 if possible since I plan to install a custom ROM...most likely Cyanogenmod....
Latest update...
Latest Update…
I finally managed to successfully flash a Kitakat 4.4.2 vs. 2 (unmerged storage) stock rom…I downloaded the file again from xdafirmware.com and flashed it. There was no problem. The phone has started and its up since the last one hour or so.
Before booting I entered into stock recovery and did a wipe data/factory reset and also wipe cache partition. So far no problem. I have not yet switched on my wifi coz I am worried it might go off again and enter a bootloop.
Battery was 95% when booted...its now 94% since one hour...I have not used the phone at all though...
Now I have a barrage of questions…
1) The IMEI is gone…I know how to get it back. But would appreciate a proper guidance on this…I have tried using Maui Meta 3G ver 6.1 and was successful in restoring my original IMEI numbers. Is there a better way out? Or should I stick to this one? Should I use IMEI&SN Writer?
2) NVRAM WARNING: Err= 0x10 …how do I fix this…I have never tried fixing this before. So no idea whatsoever. I have no backups of the original stock rom. Greatest mistake I ever did.
3) How to restore my original serial number (S/N) of the phone? I have the Original S/N but don’t know how to do it. Also, is S/N being restored a necessary requirement like IMEI numbers since it is linked to the SIM/Network?
4) How to unlock the bootloader? This is the biggest headache. I believe one cannot install custom ROM’s without unlocking the bootloader.
5) What are the best rooting apps? Is SuperSu good enough to root?
6) Which is the best custom recovery for Canvas Knight?
7) Final question, how to go about using this tool Mtk_Droid_Tool_v2.5.3
Sorry for the trouble. But I have messed up many times in the last one month with innumerable flashing of the ROM’s and zip files. Now, once bitten twice shy I want to play safe.
So please let me know your thoughts if they are fail proof and time tested. Thanks for all your help. God bless.
Frank Morris said:
Latest Update…
I finally managed to successfully flash a Kitakat 4.4.2 vs. 2 (unmerged storage) stock rom…I downloaded the file again from xdafirmware.com and flashed it. There was no problem. The phone has started and its up since the last one hour or so.
Before booting I entered into stock recovery and did a wipe data/factory reset and also wipe cache partition. So far no problem. I have not yet switched on my wifi coz I am worried it might go off again and enter a bootloop.
Battery was 95% when booted...its now 94% since one hour...I have not used the phone at all though...
Now I have a barrage of questions…
1) The IMEI is gone…I know how to get it back. But would appreciate a proper guidance on this…I have tried using Maui Meta 3G ver 6.1 and was successful in restoring my original IMEI numbers. Is there a better way out? Or should I stick to this one? Should I use IMEI&SN Writer?
2) NVRAM WARNING: Err= 0x10 …how do I fix this…I have never tried fixing this before. So no idea whatsoever. I have no backups of the original stock rom. Greatest mistake I ever did.
3) How to restore my original serial number (S/N) of the phone? I have the Original S/N but don’t know how to do it. Also, is S/N being restored a necessary requirement like IMEI numbers since it is linked to the SIM/Network?
4) How to unlock the bootloader? This is the biggest headache. I believe one cannot install custom ROM’s without unlocking the bootloader.
5) What are the best rooting apps? Is SuperSu good enough to root?
6) Which is the best custom recovery for Canvas Knight?
7) Final question, how to go about using this tool Mtk_Droid_Tool_v2.5.3
Sorry for the trouble. But I have messed up many times in the last one month with innumerable flashing of the ROM’s and zip files. Now, once bitten twice shy I want to play safe.
So please let me know your thoughts if they are fail proof and time tested. Thanks for all your help. God bless.
Click to expand...
Click to collapse
Well I hate giving bad news to people but I might know what causing all this.
As you say,the phone booted fine now but you'll likely see random hangs and sudden reboots in using it,to be sure,use it for atleast 2 hrs constantly and then we can proceed further with your questions.
In mean time,check this post:
https://forum.xda-developers.com/showpost.php?p=69482562&postcount=697
Mr.Ak said:
Well I hate giving bad news to people but I might know what causing all this.
As you say,the phone booted fine now but you'll likely see random hangs and sudden reboots in using it,to be sure,use it for atleast 2 hrs constantly and then we can proceed further with your questions.
In mean time,check this post:
https://forum.xda-developers.com/showpost.php?p=69482562&postcount=697
Click to expand...
Click to collapse
Well I tried using it for a while...no internet...just going through settings and checking...then I enabled Developers options and connected USB. Tried to check if the phone was listed on ADB etc....but then it went into a bootloop and kept shutting down after periodic bootloops...now its totally down...not responding at all.
Anyway, I think I know how to get it back when everything else fail. Until then stay blessed and don't give up.
God bless.
Frank Morris said:
Well I tried using it for a while...no internet...just going through settings and checking...then I enabled Developers options and connected USB. Tried to check if the phone was listed on ADB etc....but then it went into a bootloop and kept shutting down after periodic bootloops...now its totally down...not responding at all.
Anyway, I think I know how to get it back when everything else fail. Until then stay blessed and don't give up.
God bless.
Click to expand...
Click to collapse
How?
The Phone has been up and about for the last 6 hours now...
Mr.Ak said:
How?
Click to expand...
Click to collapse
Hi, Sorry for the sudden disappearance. I really didn't know how to reply to your "HOW"? But I knew there was a CERTAIN possibility of getting the phone back...I call it faith in God. And I have plenty of faith and I believe in the impossible coz I have seen some of the most impossible things happen in my life and around me over the years. So plain hope and faith in God was what I banked on. But I have no logical explanation to give on the phone starting again smoothly. I have been struggling with this phone for the last 45 days. And this is the first time the phone has really stayed put and it got booted in just one go!
Also your signature line was a source of continued inspiration to hit out against all the odds and doubts.
I would now kindly appreciate any help in restoring the phone to full functionality...I mean would love to hear answers for my questions from the previous post.
In the meanwhile, I did a bit of study on the Miracle Box and a tool called ALL-IN-ONE-TOOL_V2.1...
But, I don't want to jump the gun and get going...Will wait for expert advice. Until then God bless us all. Stay blessed. And yes, thanks for all the help. Shalom.
Frank Morris said:
Hi, Sorry for the sudden disappearance. I really didn't know how to reply to your "HOW"? But I knew there was a CERTAIN possibility of getting the phone back...I call it faith in God. And I have plenty of faith and I believe in the impossible coz I have seen some of the most impossible things happen in my life and around me over the years. So plain hope and faith in God was what I banked on. But I have no logical explanation to give on the phone starting again smoothly. I have been struggling with this phone for the last 45 days. And this is the first time the phone has really stayed put and it got booted in just one go!
Also your signature line was a source of continued inspiration to hit out against all the odds and doubts.
I would now kindly appreciate any help in restoring the phone to full functionality...I mean would love to hear answers for my questions from the previous post.
In the meanwhile, I did a bit of study on the Miracle Box and a tool called ALL-IN-ONE-TOOL_V2.1...
But, I don't want to jump the gun and get going...Will wait for expert advice. Until then God bless us all. Stay blessed. And yes, thanks for all the help. Shalom.
Click to expand...
Click to collapse
You don't need all those tool box.
Sp flash tools is enough to give life to your device.
Help required to set up the device fully...now that it is working!
Mr.Ak said:
You don't need all those tool box.
Sp flash tools is enough to give life to your device.
Click to expand...
Click to collapse
Hi Ak,
Thanks for your reply. My device is up and about since the last hmmm...to be exact...26 hours. I didn't have any reboots or bootloops or anything for that matter.
However, I need to set it up complete...customization I mean...and these are some of the problems I am facing... Quoting a part of the previous post to save typing...
Quote "Now I have a barrage of questions…
1) The IMEI is gone…I know how to get it back. But would appreciate a proper guidance on this…I have tried using Maui Meta 3G ver 6.1 and was successful in restoring my original IMEI numbers. Is there a better way out? Or should I stick to this one? Should I use IMEI&SN Writer?
2) NVRAM WARNING: Err= 0x10 …how do I fix this…I have never tried fixing this before. So no idea whatsoever. I have no backups of the original stock ROM. Greatest mistake I ever did.
3) How to restore my original serial number (S/N) of the phone? I have the Original S/N but don’t know how to do it. Also, is S/N being restored a necessary requirement like IMEI numbers since it is linked to the SIM/Network?
4) How to unlock the boot-loader? This is the biggest headache. I believe one cannot install custom ROM’s without unlocking the boot-loader.
5) What are the best rooting apps? Is SuperSu good enough to root?
6) Which is the best custom recovery for Canvas Knight?
7) Final question, how to go about using this tool Mtk_Droid_Tool_v2.5.3" Unquote.
In the meanwhile, I have done a little bit of study and RnD of the miracle box/MTK Droid Tools/S&N Writer tool etc. on my old Canvas HD 116. And I realized that the Miracle Box is one good tool. The IMEI No. can be changed in a jiffy. Rooting is extremely easy using this box. I did via adb.
In short, a bit too confused with too much knowledge on hand. Looking for wisdom to apply this knowledge correctly. There could be many simpler ways too!!! Any help in this regard is much appreciated.
Thanks and God bless us all. Shalom.
Frank Morris said:
Hi Ak,
Thanks for your reply. My device is up and about since the last hmmm...to be exact...26 hours. I didn't have any reboots or bootloops or anything for that matter.
However, I need to set it up complete...customization I mean...and these are some of the problems I am facing... Quoting a part of the previous post to save typing...
Quote "Now I have a barrage of questions…
1) The IMEI is gone…I know how to get it back. But would appreciate a proper guidance on this…I have tried using Maui Meta 3G ver 6.1 and was successful in restoring my original IMEI numbers. Is there a better way out? Or should I stick to this one? Should I use IMEI&SN Writer?
2) NVRAM WARNING: Err= 0x10 …how do I fix this…I have never tried fixing this before. So no idea whatsoever. I have no backups of the original stock ROM. Greatest mistake I ever did.
3) How to restore my original serial number (S/N) of the phone? I have the Original S/N but don’t know how to do it. Also, is S/N being restored a necessary requirement like IMEI numbers since it is linked to the SIM/Network?
4) How to unlock the boot-loader? This is the biggest headache. I believe one cannot install custom ROM’s without unlocking the boot-loader.
5) What are the best rooting apps? Is SuperSu good enough to root?
6) Which is the best custom recovery for Canvas Knight?
7) Final question, how to go about using this tool Mtk_Droid_Tool_v2.5.3" Unquote.
In the meanwhile, I have done a little bit of study and RnD of the miracle box/MTK Droid Tools/S&N Writer tool etc. on my old Canvas HD 116. And I realized that the Miracle Box is one good tool. The IMEI No. can be changed in a jiffy. Rooting is extremely easy using this box. I did via adb.
In short, a bit too confused with too much knowledge on hand. Looking for wisdom to apply this knowledge correctly. There could be many simpler ways too!!! Any help in this regard is much appreciated.
Thanks and God bless us all. Shalom.
Click to expand...
Click to collapse
Okay don't panic!
Clearly your device is fine by hardware stuff so let's fix some myths and problem of yours.
Firstly,this is mt6592 so you don't have to unlock any boot loader stuff.You can just root your device using kingroot or kingoroot(google it).
For more please read out this whole section,
https://canvasknightroms.blogspot.com/2015/10/rooting-canvas-knight.html?m=1
Now I believe you have root by now. Now all you need to do is get a recovery and as you're on v2 you can find it here,
https://drive.google.com/file/d/0B5W6R0DsDjWTU1o3TEpfWGFsMEE/view
This is philz recovery with OTG support.As you've root just download the IMG file and flash it though flashify,you can find it on Play store.So you've recovery!
Again,these are just suggested methods,you can do all that with other methods too.Also please stop wasting time on stuffs like miracle boxes and etc etc.
Secondly to get your imei back it would be very easy as you've recovery.
https://drive.google.com/file/d/0B6-QF5uchBNhbFlfVk1wOEthbms/view
Just flash this file in recovery and everything shld be fine.
Now to fix Nvram error,just extract the folder from this backup zip,
https://drive.google.com/file/d/0ByuIKfMkBBxBaXBZRHJnNHVRMVk/view
And using any root explorer(I prefer es file manager) go to /data root and replace nvram folder with the folder in this zip
Now the best recovery would be philz recovery for v2 but I greatly suggest you to flash v3 for a variety of reasons and custom ROMs.Yes,you need to shift to v3 to get LP or MM and new updated ROMs though you can still flash available ROMs for v2 which you can find here,
https://canvasknightroms.blogspot.in/2015/10/all-roms-link-for-v2.html?m=1
Very less isn't it? That's because storage barrier in v2.
You can find various mods here,
https://canvasknightroms.blogspot.in/2015/10/mods.html?m=1
You can find correct stock ROMs here,
https://canvasknightroms.blogspot.in/2015/10/stock-rom.html?m=1
Flashing the sim fix above will eventually fix SN too.
And yes many custom ROMs are bundled with SuperSU so you should use that.
To convert from kingroot user to super su use this guide,
https://forum.xda-developers.com/ca...ck-switch-kingroot-to-supersu-easily-t3426965
And lastly mtkdroidtools is a good tool and you should definitely have it just in case for backing up stuff and tinkering with ADB.
With all that said,you should join our Whatsapp group for more faster help and updates by messaging me on my Whatsapp No. +919468519959
Enjoy!
Edit: writing all this is a pain in ass,at least one thanks is deserved
Thank you so much...
Mr.Ak said:
Okay don't panic!
Clearly your device is fine by hardware stuff so let's fix some myths and problem of yours.
Firstly,this is mt6592 so you don't have to unlock any boot loader stuff.You can just root your device using kingroot or kingoroot(google it).
For more please read out this whole section,
https://canvasknightroms.blogspot.com/2015/10/rooting-canvas-knight.html?m=1
Now I believe you have root by now. Now all you need to do is get a recovery and as you're on v2 you can find it here,
https://drive.google.com/file/d/0B5W6R0DsDjWTU1o3TEpfWGFsMEE/view
This is philz recovery with OTG support.As you've root just download the IMG file and flash it though flashify,you can find it on Play store.So you've recovery!
Again,these are just suggested methods,you can do all that with other methods too.Also please stop wasting time on stuffs like miracle boxes and etc etc.
Secondly to get your imei back it would be very easy as you've recovery.
https://drive.google.com/file/d/0B6-QF5uchBNhbFlfVk1wOEthbms/view
Just flash this file in recovery and everything shld be fine.
Now to fix Nvram error,just extract the folder from this backup zip,
https://drive.google.com/file/d/0ByuIKfMkBBxBaXBZRHJnNHVRMVk/view
And using any root explorer(I prefer es file manager) go to /data root and replace nvram folder with the folder in this zip
Now the best recovery would be philz recovery for v2 but I greatly suggest you to flash v3 for a variety of reasons and custom ROMs.Yes,you need to shift to v3 to get LP or MM and new updated ROMs though you can still flash available ROMs for v2 which you can find here,
https://canvasknightroms.blogspot.in/2015/10/all-roms-link-for-v2.html?m=1
Very less isn't it? That's because storage barrier in v2.
You can find various mods here,
https://canvasknightroms.blogspot.in/2015/10/mods.html?m=1
You can find correct stock ROMs here,
https://canvasknightroms.blogspot.in/2015/10/stock-rom.html?m=1
Flashing the sim fix above will eventually fix SN too.
And yes many custom ROMs are bundled with SuperSU so you should use that.
To convert from kingroot user to super su use this guide,
https://forum.xda-developers.com/ca...ck-switch-kingroot-to-supersu-easily-t3426965
And lastly mtkdroidtools is a good tool and you should definitely have it just in case for backing up stuff and tinkering with ADB.
With all that said,you should join our Whatsapp group for more faster help and updates by messaging me on my Whatsapp No. +919468519959
Enjoy!
Edit: writing all this is a pain in ass,at least one thanks is deserved
Click to expand...
Click to collapse
Hi Ak,
I went through your entire post and more or less got most of the useful and helpful information. I have not gone through all the links and will do so in due course.
I have been on your website and have read quite a bit and was happy to see the dedication and commitment to help people like us.
I am sure the phone like you said is stable and away from hardware issues. I will consider flashing vs. 3 soon. Yes, i agree with you there are more choices for vs. 3. I did peep into the website last week to see the big list of custom ROM's for vs. 3.
Last but not the least, God bless you. Shalom.
Frank Morris said:
Hi Ak,
I went through your entire post and more or less got most of the useful and helpful information. I have not gone through all the links and will do so in due course.
I have been on your website and have read quite a bit and was happy to see the dedication and commitment to help people like us.
I am sure the phone like you said is stable and away from hardware issues. I will consider flashing vs. 3 soon. Yes, i agree with you there are more choices for vs. 3. I did peep into the website last week to see the big list of custom ROM's for vs. 3.
Last but not the least, God bless you. Shalom.
Click to expand...
Click to collapse
What about joining our whatsapp group?
Hi, guys.
Today, my OP5 decided to troll me. I was using normally him, when suddenly it started to lags pretty bad. I restarted and he continued to lags and freeze. I made a wipe cache via stock recovery (i didnt made any change at all in it, no unlocked bootloader, no root). That's when my nightmare begins. It begins to bootloop. Sometimes i was able to start the boot animation, but then it just restarts to the beginning. I tried a lot of tips, wiping cache, system, etc. Then, i left it charging. When i tried to turn on again, it worked like nothing ever happened to him. I made a backup of my personal data fast, scared to him suddenly restart again. After that, i decided to made a Factory Reset, clean up everything. When i did it, he started the lag and freezes again. I was at lost. That's was when i decided to use the official unbrick tool, to make the cleanest OP5 ever possible. I grabbed the archives from this link and followed this tutorial. When i was executing the programa, in the userdate.img, he showed a error. When i saw it, i just stopped and closed the program. Now, my OP5 is hardbricked. The only sign of life that i get from him is when i connect him at the PC. I can identify it as qualcoom 9008, but when i try to run the program, he just fail and show me error 258.
Plz, i need some orientations. I have been read things for about 10 hours and didnt found a solution. I live abroad for any oneplus tech center, and i believe, for the other posts that i read, that online tech support wouldn't help me a lot. I really don't like to make this kind of post but i am kind of desesperate. I dont have money to afford another phone
Again, sry to disturb you all. Sry if i broke some rule of the forum too. And sry for my bad english, i hope that i was able to communicate right.
EDIT: I just tried in another computer. Same error appears. :'(
Hummm why follow a Unbrick Topic with tools for ...3T ?
Maybe you have a encryption problem, all your Tools/Topic are so old for the actual versions (Oreo 8.X OOS / 8.1 OOS)
I advise to you (in the first time), to flash this TWRP (using fastboot, very simple) just follow this guide : here
If you can flash TWRP, your phone is not bricked, you will boot in TWRP:
- Format Data > tape "yes" > Reboot in TWRP
- Copy/Past xXx 10.0 ROM to test, install and xXx Rom will fix/install for you the best OOS Custom ROM for your OP5 with a great Aroma Installer.
If TWRP with this rom work perfectly, you wil able to restore a official stock OOS for sure, just flash original/stock recovery (fastboot), wipe all data/partitions, install your OOS rom and it's fine
I think @cidsantiago says they bootloader isn't unlocked.
He needs to know that unlock the bootloader implies lost all /sdcard data and also installed apps and settings) before start the TWRP install process...
Pho3nX said:
Hummm why follow a Unbrick Topic with tools for ...3T ?
Maybe you have a encryption problem, all your Tools/Topic are so old for the actual versions (Oreo 8.X OOS / 8.1 OOS)
I advise to you (in the first time), to flash this TWRP (using fastboot, very simple) just follow this guide : here
If you can flash TWRP, your phone is not bricked, you will boot in TWRP:
- Format Data > tape "yes" > Reboot in TWRP
- Copy/Past xXx 10.0 ROM to test, install and xXx Rom will fix/install for you the best OOS Custom ROM for your OP5 with a great Aroma Installer.
If TWRP with this rom work perfectly, you wil able to restore a official stock OOS for sure, just flash original/stock recovery (fastboot), wipe all data/partitions, install your OOS rom and it's fine
Click to expand...
Click to collapse
Pho3nX said:
Hummm why follow a Unbrick Topic with tools for ...3T ?
Click to expand...
Click to collapse
I used the tools for 5. Just the procedure that i get from this topic. :T I am gonna try the method that you gave me now brb.
EDIT: Just tried this. My cellphone cant be recognized in fastboot devices. As a said, i am not getting any response for him, just when i plug it in the PC. So i wasn't able to unlock bootload or anything like that. I tried just to plug it and see if fastboot was able to identifying it, but it wasn't.
bartito said:
I think @cidsantiago says they bootloader isn't unlocked.
He needs to know that unlock the bootloader implies lost all /sdcard data and also installed apps and settings) before start the TWRP install process...
Click to expand...
Click to collapse
Yes, it should not be unlocked. But at the moment, i am taking anything, really. I just want to use my phone.
cidsantiago said:
Yes, it should not be unlocked. But at the moment, i am taking anything, really. I just want to use my phone.
Click to expand...
Click to collapse
Wipe your device data from the stock recovery.
You loss the settings and downloaded apps but not requires to unlock the bootloader.
bartito said:
Wipe your device data from the stock recovery.
You loss the settings and downloaded apps but not requires to unlock the bootloader.
Click to expand...
Click to collapse
I can't access recovery anymore, as i said. The only sign of life that i get is when i connect it in the PC.
I guess i have to do something to restore the basics partitions of my cellphone. Like recovery, boot, etc. But i just have the official tool to do that. There is another way? Like transfering directly by the COM port?
Have you tried following this guide? https://forum.xda-developers.com/oneplus-5/how-to/guide-unbrick-guide-hard-bricked-t3761706
---------- Post added at 01:30 PM ---------- Previous post was at 01:26 PM ----------
I had the same exact problem with my old One plus One. Spent like 4 days trying to unbrick it. That msm tool did the fix for me. Also, in that link to the guide you provided, doesn't it flash the Chinese version of the OS? If that's the case, I don't think it was a good idea to do so lol
Mash1ro said:
Have you tried following this guide? https://forum.xda-developers.com/oneplus-5/how-to/guide-unbrick-guide-hard-bricked-t3761706
---------- Post added at 01:30 PM ---------- Previous post was at 01:26 PM ----------
I had the same exact problem with my old One plus One. Spent like 4 days trying to unbrick it. That msm tool did the fix for me. Also, in that link to the guide you provided, doesn't it flash the Chinese version of the OS? If that's the case, I don't think it was a good idea to do so lol
Click to expand...
Click to collapse
In one of the links, it had the OOS and the HOS. I tried to use the msm tool in one of them, but it didnt worked I'm gonna try the archives in this link that you gave me. It may work brb with updates.
Don't worry though, it happens to plenty of people. It happened to me as well, and everyone eventually fixes it. It is unlikely that it is a hardware problem, so just following the correct steps should get it working. Keep trying stuff out, it's very good that your computer recognizes it as a qualcomm port, as far as I know that's all you need to flash the necessary things in order for it to boot.
I am getting the same error 258 in this post. :T I posted there to see if the OP can help me. But thx for your help @Mash1ro
Mash1ro said:
Don't worry though, it happens to plenty of people. It happened to me as well, and everyone eventually fixes it. It is unlikely that it is a hardware problem, so just following the correct steps should get it working. Keep trying stuff out, it's very good that your computer recognizes it as a qualcomm port, as far as I know that's all you need to flash the necessary things in order for it to boot.
Click to expand...
Click to collapse
Thx for your support! I will continue to try stuff
Try reading the comments from this post as well https://forum.xda-developers.com/oneplus-3t/help/hard-bricked-op3t-t3574720/page2
2 of the people had the same error as you, and one of them solved the issue by changing the USB port.
---------- Post added at 02:26 PM ---------- Previous post was at 02:23 PM ----------
But don't use the same files and all that stuff, since that's for the 3T. Try to pick out the things that might help but use the files for the OnePlus 5 only
After try the unbrick procedure in 3 different PCs, using about 10 different USB ports, i still getting the same error in the same step. When downloading cache.img, he stuck in about mid bar, and shows me the warning: SendProgramCommand Failed, Error: 258". Besides that, he turns on the green led and stop being recognize by the PC. Then i have to hold power and turn off the green led. :T Maybe i can use a linux to access the partitions?
cidsantiago said:
After try the unbrick procedure in 3 different PCs, using about 10 different USB ports, i still getting the same error in the same step. When downloading cache.img, he stuck in about mid bar, and shows me the warning: SendProgramCommand Failed, Error: 258". Besides that, he turns on the green led and stop being recognize by the PC. Then i have to hold power and turn off the green led. :T Maybe i can use a linux to access the partitions?
Click to expand...
Click to collapse
it seems like a hardware problem, i was facing this on different phone ( 5X )
Apayah said:
it seems like a hardware problem, i was facing this on different phone ( 5X )
Click to expand...
Click to collapse
yeah... But it is kind of weird. He was running smoothly, until suddenly started lag and freeze. He didn't fall or any of that... I think is just a defective phone. Doesn't find another explanation to that.
I think your best option is to RMA the device through OnePlus. Since you haven't rooted it or anything, they should repair it for you.
david19au said:
I think your best option is to RMA the device through OnePlus. Since you haven't rooted it or anything, they should repair it for you.
Click to expand...
Click to collapse
I already contact the store that i bought to get my warranty. Unfortunately, i didn't bought it in oneplus.net, bcs they don't deliver in my country. I am hoping that everything work out
Guys, in the end, i RMA my device back to the seller and gonna have a refund Thank you for your help. So sad that this phone came faulty :T
Best regards to you all!