Related
I think it's taken a knock and now it won't boot. I just get a white screen. If I try a hard reset it gives me the text that I'll wipe all personal settings etc.
I've flashed to a duttys ROM and a 2.x.50.x radio and I'm on O2. Is there any way I can fix this as I'm guessing the ROm update voided the warrenty. As the Hard reset shows text I can see something is working but even plugging it into my PC via USB gets no response.
If anyone can help it would be a major relief.
Let it do the hard reset and see what happens. So you'll lose what ever MMS/SMS you didn't delete, the programs you have loaded since putting the ROM on, etc etc. Your not going to lose all your numbers unless they are stored on the actual phone and not the SIM card.
You could try doing a task29 on it and see if that helps. As for the warranty being voided it just depends on whether or not it can be wiped and loading with a OEM ROM back onto it with the correct HSPL before sending it back. You haven't bricked it if you can get into bootloader or hard reset.
I have tried the hard reset but no joy. It runs the reset but then on boot back to white screen. I'm not fussed about the contacts etc as it's all backed up. Have removed the SD card too.
Do a task29 on it. Flash a new radio and ROM(would suggest OEM) and then get back to us. Worst case something got knocked loose inside and it needs to go to HTC for repair.
craigpyro said:
I have tried the hard reset but no joy. It runs the reset but then on boot back to white screen. I'm not fussed about the contacts etc as it's all backed up. Have removed the SD card too.
Click to expand...
Click to collapse
i've encountered this lately for some strange reason ( being a flash junky) but found my way out of it.
flash your stock ROM via sdcard method, this will reset the spl to the original. (you can easily flash hspl anyway afterwards when you tire of the stock rom).
Ignore my post below. Have drained the battery overnight and this morning have been able to boot to:
PB81100 HX-BC
SPl-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
SERIAL
From here I'm hopeful I can do something.
_______________________________________________________________________________________________________
Sorry guys - but I don't understand how I am meant to do a task29 or ROM via SD card method when I cannot link by USB/ActiveSync or see anything on the screen.
craigpyro said:
....
Sorry guys - but I don't understand how I am meant to do a task29 or ROM via SD card method when I cannot link by USB/ActiveSync or see anything on the screen.
Click to expand...
Click to collapse
The microSD method does not require your phone to connect to the computer.
Here from the newbie guide to flashing a ROM:
Download a shipped Rom from *HERE*
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
This flashes your phone back to warranty status - it replaces the HardSPL, the ROM and the Radio.
Once your phone is repaired, you can always HardSPL your phone again.
I've tried using the HSPL tool to re-install back to 1.41 and other SPLs. The application says it's successful but when I restart the bootloader still reads:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
have tried Flashing ROMs and running Task29. Everytime the Bootloader switches to the updating progress bar then crashes out to Error [262].
I dont have a card reader to try from the SD card but even if I did I'm starting to feel doubtful.
are you sure, that the radio is compatible with the rom?
i'm pretty sure its the same fail.
DN41
OK - booting from FAT32 formatted microSD.
Stock ROM failed
Radio_2.08.50.05 failed
maybe a corrupt image file ? try downloading another one and see if that helps
I've tried 2 images. They get to different points at the radio install then fail. Try to get another img.
Starting to despair a little now. Trying to get just the radio on to start with.
This radio installs up to 100% (instead of about 20%) then reads:
00018003
LEOIMG.nbh - FAIL
Radio_V2Fail
Update Terminate
UPDATE FAIL
I really am getting desperate now having spent almost all day working on this.
Try using the supplied 2GB microSD card that came with the phone. Sometimes there are problems with using larger cards.
Thanks for the idea however I'm using a spare 1GB.
Silly question, but it is an O2 original ROM (assuming that is what your phone originally had on it) you downloaded and are flashing and not an HTC stock ROM (ie 1.66 WWE)?
I have tried both.
I am on the same issue here. Have read almost anything i could find to fix this. Am able to change spl through hspl2 successfully but showing the same spl 1.42 hspl in bootloader. The thing is only unable to flash radio. I can flash a custom rom with sd card but after flashing when it boot up only a white screen is showing. When i try to install a official stock rom it shows that the radio v2 not installed successfully. So its probably radio problem. Hope some one could help us fix this. I tried installing a radio with the sd card and still gets the radio v2 fail. Tried installing custom rom and radio with the usb but doest go beyond 0% and error shown in the pc. HELP HELP HELP
craigpyro said:
Starting to despair a little now. Trying to get just the radio on to start with.
This radio installs up to 100% (instead of about 20%) then reads:
00018003
LEOIMG.nbh - FAIL
Radio_V2Fail
Update Terminate
UPDATE FAIL
I really am getting desperate now having spent almost all day working on this.
Click to expand...
Click to collapse
With the steps I describe here I was able to recover the device.
http://forum.xda-developers.com/showthread.php?t=668347
But only if you follow the exact steps!
I tried many stock roms first and all were stuck on the radio.
Only the method I describe worked for me.
Good luck.
for you guys across the pond, don't you have to flash a .51 radio, not a .50 that you were using for the custom ROMs?
Okay here is the rundown:
1. Bought HD2 phone from ebay that had "freezing problems". Phone would freeze on "Stick Together" screen even after hard reset. Cleaned and made sure battery pins were straight. Removed SIM and sd card during the entire process.
2. Attempted to flash T-Mobile 2.13 update by sd card. (Formated card FAT32 and changed .nbh file to leoimg.nbh). Waited a day and then hard reset the phone and phone froze again.
3. Flashed HSPL and attempted to run Task29. (Right click on run as administrator but the program never completes). I've tried the version that requires a radio. I attempted to extract the Task29 that doesn't require the radio but for some reason the computer is unable to do so.
4. Tried to run T-Mobile update again but now that program cannot finish. Says something about radio failure.
I can still get into the bootloader screen but if I start it up normally it reads "System update failure". Needing any help I can get. I'm not an expert at this (obviously) so please try to use "noob" terminology for my benefit if possible. I'm using Vista and I'll try to give whatever information that may be needed in order to resolve this matter. Thanks in advance for your help.
What does it show in bootloader exactly?
And, after you flashed 2.13.531.1 stock did the phone boot past the splash screen (Stick Together screen)? Have you tried flashing via Activesync?
In bootloader in the upper right hand corner it says RUUNBH
then shows the following lines
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Upgrade ROM code error
Please try again
Once I flashed stock ROM it went pass the splash screen once (and that was after many MANY hard resets without SIM and sd card).
I tried activesync also but it doesn't complete. It keeps failing when it gets to installing the radio.
try to flash just a radio....Just make sure its compatible with the phone...you can only use one series of radio for the tmous hd2....
Manually put phone into bootloader..
Connect to computer via usb
Run RUU...
Cant hurt...just to see if you can flash a radio to it..since thats where your getting your errors...
bossb2525 said:
Okay here is the rundown:
1. Bought HD2 phone from ebay that had "freezing problems". Phone would freeze on "Stick Together" screen even after hard reset. Cleaned and made sure battery pins were straight. Removed SIM and sd card during the entire process.
2. Attempted to flash T-Mobile 2.13 update by sd card. (Formated card FAT32 and changed .nbh file to leoimg.nbh). Waited a day and then hard reset the phone and phone froze again.
3. Flashed HSPL and attempted to run Task29. (Right click on run as administrator but the program never completes). I've tried the version that requires a radio. I attempted to extract the Task29 that doesn't require the radio but for some reason the computer is unable to do so.
4. Tried to run T-Mobile update again but now that program cannot finish. Says something about radio failure.
I can still get into the bootloader screen but if I start it up normally it reads "System update failure". Needing any help I can get. I'm not an expert at this (obviously) so please try to use "noob" terminology for my benefit if possible. I'm using Vista and I'll try to give whatever information that may be needed in order to resolve this matter. Thanks in advance for your help.
Click to expand...
Click to collapse
hello there...
this is known issue with some t-mobile hd2's..
this happens mostly when you get refurbished..but i'm not sure
almost same thing happens look here --> http://forum.xda-developers.com/showthread.php?t=795554
go ahead, flash stock rom, get replacement from t-mobile
Thas not gonna help
JackH said:
hello there...
this is known issue with some t-mobile hd2's..
this happens mostly when you get refurbished..but i'm not sure
almost same thing happens look here --> http://forum.xda-developers.com/showthread.php?t=795554
go ahead, flash stock rom, get replacement from t-mobile
Click to expand...
Click to collapse
He stated quite clearly he bought the phone on eBay - Hows he gonna get a replacement from T-Mobile without a warranty?
Okay - if you can get to the Bootloader consistently, you have that going for you at least. Did you try just flashing a Radio? If thAT fails, Next thing I would try is a task 29, then flash a stock ROM afterwards. Alternately, you COULd try reflaching HSPL, in the event that it's corrupted in some way. You have some options still, just preceed cautiously, and don't flash anything you are unsure of. Let us know what happens!
i have the same exact issue too, see: http://forum.xda-developers.com/showthread.php?p=8434282#post8434282
I am using windows 7, and mine installed the regular spl and rom, but not the radio from the memory card.
I hope someone figures it out.
simplest way
hi brother.....i m facing the same problem nd i dnt hav the bill from t mobile also, so cnt replace the **** back..nyways...what i did was gave it to a htc service center they chekd the fon...nd said hav to replace the mainboard... fuk.....now its stil ther since 3 weeks.....lets c wat happens
Sorry, I just realized XDA went down one night and all my updated information that I posted on here was erased. Anyway, I was successful in running task29. I also successfully updated the phone to the 2.13 software from t-mobile. In the end my phone still froze and would occasionally go past the splash screen. Since I can't get any consistency with the phone (and since I've been working on this phone for almost 3 weeks) I just finally gave up on it. Hope somebody can find a solution for the rest of you experiencing this problem. I will continue to check back at the other threads to see if anyone finds the magic fix. Thanks for everybody who tried to help me.
Hi folks,
I have a T-Mobile branded HD2 that gets stuck on bootscreen. Since this one is owned by the company I work for I should not flash custom ROMs or whatever. I got it from a colleague with this error.
What I did is downloading the latest official ROM from HTC with T-Mobile branding, extracted the .nbh file and stored it as LEOIMG.nbh on its SD card. I flashed the ROM, removed battery, put it back in and immediately did a hard reset. Still no luck it keeps stuck in the boot screen showing the ugly circle. No animation, no nothing.
Any ideas?
Regards,
Chris
What is the full name of the official ROM you got .and did I understand you correst you got it from the T-Mobile website? Also what does it say when you put it in BOOt loader?
Filename:
_HTC HD2_RUU_Leo_TMO_DE_1.72.111.4_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship.exe
Download from:
http://www.htc.com/de/supportdownloadlist.aspx?p_id=297&act=sd&cat=2
I am not sure what you mean with bootloader? VolDwn+Power?
PB1100 HX-BC
SPL-1.66.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x50
Let me know in case you need more details.
It gets even more weird...
I put the phone on charge (switched off). It suddenly switched itself on and then booted into windows. It came to the point where it asks for the PIN. I entered it and as soon as it accepted the code it rebooted again and is stuck on the same screen as ever.
Sorry I was changing my ROM, That is why it took a minute, Are you sure you have a T-Mobile HD2? Cause it says in the name of the ROM you posted that it has a 2.07.51.22 and that radio is deadly to a T-Mobile HD2.
Does it have a green send button and a red end button?
Also did you enter the serial number of your HD2 in the HTC site to verify that this ROM is for your HD2?
What you said about it rebooting when you plugged the charger in is weird.
I bought this HTC (and several others) all from T-Mobile, since we got some company agreement. When I first got it disfunctional it booted up with this circular bootscreen in T-Mobile colors. I personaly own a Desire HD, so I know about the uncustomized bootscreen.
This is T-Mobile for Germany, not UK or US. For the US version the radio won´t work since bands are different. I have heard about that...
This device does not have colored buttons.
Yes, I have entered the serial number on this site and it has been validated. Then I downloaded and unpacked it just the way it is described in this forum.
I also tried to download the original, latest, unbranded HTC ROM, but it did not validate my SN.
I have reformatted the original 2GB SD card with FAT32 and tried the same. After it says UPDATE SUCCESS it does nothing. Is this correct?
I took off the battery and after a couple of seconds back in, doing a hard reset. It then still got stuck on the bootscreen.
Ok do this download the Task 29 by ShaDrak from post #1 of the Task 29 thread here on XDA and run a Task 29 on the HD2 then download HSPL 4 (link in my sig) and flash HSPL 3.03. then try to flash your ROM again. If it flashes successfully then use the HSPL utility to reset y our correct SPL. I will have to go see if I can find the correct SPL for you if you don't know whioch one it is.
Thanks for your help, but I think I´ll rather return it for a new one then. This HD2 is for testing our mobile website, so one developer will need to wait a little longer for a replacement. This smartphone is 3 weeks old (half a week of use due to vacation), so I do not want to brick it and stick with it. Last time I did HSPL was with my old diamond, feels like a decade ago.
I am limited with downloads at my company due to firewall restrictions and I am not allowed to install programs. I am glad that I got USB allowed, though I am part of the admin crew
I´d even take it home, but I do not have windows running on any of my computers.
Ferrosti said:
I am not sure what you mean with bootloader? VolDwn+Power?
Click to expand...
Click to collapse
This is what I mean by bootloader, once you see the multicolor bootloader screen connect it to your computer via USB and wait for the Serial to change to USB and Right click the RUU for the ROM and run as administrator.
I understand you not wanting to brick it and your issue with downloads, that does suck. But the task 29 just does a wipe of the ROM partition of the NAND memory and reformats that partition. Task 29 is a very small download also, very very small, the same with HSPL 4. I suggested HSPL for as it will disable the CID check on the flash and allow you to flash a ROm that is not for that particular HD2. And all you have to do to revert back is run the HSPL again but pick the SPL not the HSPL you want, it ask you what version of HSPL or SPL you want to flash. Also you have a International HD2 and they are not as prone to bricking as the TMOUS because they can be flashed with any radio version for the HD2.
It comes to my mind that I have a damn old windows installation on my computer. Maybe I´ll give it a try at home over the weekend.
The phone does not even switch from serial to USB mode as you described. Could it be because there is no active sync installed? I tried it with my personal Desire HD and I got access to its SD card.
How do I find out which SPL to flash to have it back to its original state? Is it the 1.66.000 that was shown in bootloader? Where do I get it?
Go into the Bootloader and it should say the SPL version
Mines for example is
SPL-2.08.HSPL 8G XE
CotullaHSPL
If yours should say SPL-(version number) without the HSPL/Cotulla since it shouldnt have HSPL
If Windows has the drivers for the HD2 installed (Active Sync/Center installed) it will say USB as long as the plugs and the wire are good if it stays stuck on Serial that just means either the HD2 isn't detecting windows or Windows isn't detecting it
Ferrosti said:
It comes to my mind that I have a damn old windows installation on my computer. Maybe I´ll give it a try at home over the weekend.
The phone does not even switch from serial to USB mode as you described. Could it be because there is no active sync installed? I tried it with my personal Desire HD and I got access to its SD card.
How do I find out which SPL to flash to have it back to its original state? Is it the 1.66.000 that was shown in bootloader? Where do I get it?
Click to expand...
Click to collapse
Yes I think the SPL 1.66 is the SPL for the 1.72.111.4 ROM you are trying to flash. The phone is technically suppose to install the drivers when you connect it to a computer in bootloader, but I have had to download and install the ActiveSync and the Windows Mobile Device Center too to get a computer to recognize my HD2 in bootloader (two separate computers) so yes installing the latest ActiveSync on your computer can help as it has device USB drivers with it.
Dont install ANYTHING.
If the phone is only 3 weeks old, send the damned thing back for a replacement.
Had the same problem with a european t-Mobile HD2. Sometimes (rarely) let me boot into windows, but mostly didnt.
Sent it back to HTC and they fixed and returned it within a week. Actually they said on their site that they were fixing it, but I ended up with a new phone......
So... either return it to your supplier for replacement, or send it off to HTC
Andy
I don´t know how, but I got it running on the day we have been discussing.
If I only knew how it worked I´d let you know.
After all this I put it on the charger and retried a last time before I would have taken it home (read above). I flashed the new T-Mobile branded ROM and it just worked.
Thanks for your help!
I just got HD2 Tmous from ebay for parts to fix another that I sliced and cut the LCD flex cable. The phone is in great condition and after I put in the battery from my old phone it booted up and stuck on stick together screen. I booted up to the bootloader tri-color screen and it displayed the following:
PB8112 HX-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x05
After I used the USB cable to connect to my PC running Windows 7, the Serial at the bottom changed to USB. I downloaded Windows Mobile Device Center 6.1 and installed and run it. The WMDC said USB not connected. I found the thread "Stuck on Stick Together Screen" with similar problem and was solved by re-stocking the ROM from Tmous. I downloaded it but renaming from exe to zip did not work in order to extract the LEOIMG.nbh. I found another thread "[TUT] Flash your ROM / Radio via microSD" and downloaded it. I copied the ROM to my FAT32 1GB SD card, inserted it in the phoned, booted it into the bootloader, and flashed it. It is now stuck at 10% for more than an hour.
LEOIMG.nbh
RADIO_V2 -
RCUST -
BOOTLOADER -
SPLASH1 -
OS
CONFIGDATA. -
Update in Progress...
(progress bar stuck at about 10%)
I forgot to verify that the ROM is for HD2 Tmous and don't know what it is - the thread did not mention it.
What should I do now?
Thanks in advance.
The part, where you stuck at 10% is the part, where it flashes the Radio Image. I stuck at it, when i choose the wrong ROM. Do you know, which ROM was the original one for your phone? Look it up on the internet and try it with it.
I saw, you wanted to extract the .NBH file. Try it with the Software "WinRAR". When you installed it, go to your RUU-Extractor file, right-click it and choose the point "Open in Winrar..." or sth like that.
I hope, that was a little help
Thanks,
I got it from ebay so i don't know its history. After more than 3 hours stuck at 10% and found out from other thread the ROM from Tmous was not a normal zip file that can be viewed directly from Windows Explorer, I used WinRar to extract the NBH file and pulled the battery out and put back in. The phone was rebooted and got the triangle failure symbol; I pulled the battery out and put back in and booted into the bootloader - it displayed these additional info: RUUNBH at top right and Upgrade ROM code error Please try again at the center. Also, the serial did not change to USB anymore.
(omitted some steps) I flashed the leoimg.nbh file downloaded from Tmous and the same problem happened.
Since ActiveSync does not connect to the phone and the bootloader does not function properly, any utility required ActiveSync and flashing with properly function bootloader will not work. I think there is no way for me to flash the Radio ROM, right? Is there any utility or mode that will tell me which version of Radio currently in the phone?
I am thinking of trying to flash the same HSPL and MAGLDR and see what happens after reading some more threads.
(omitted some steps) I flashed the leoimg.nbh
Click to expand...
Click to collapse
so it doesnt say 'fail' next to anything on the blue writing/grey background screen when you flash from sd card? like next to RADIO_V2 -? because it sounds like a pretty standard stuck radio (or stuck spl, tell me, did teh spl line change from your first post? (("(omitted some steps)" dont ommit anything, full detail is the only way to get accurate answers.))
Mostly this never gets fixed without a jtag, but sometimes trying all teh various roms for that particular phone (you sure its a tmous? if it is, DO NOT flash anything you didn't get from the tmous/htc website,,, if it doesnt work and you get frustrated after 100 attempts, and its late at night, dont think "oh ill just try a non tmous one, just to see" cos it will die.)
Things to read up on and try are the freezer trick, chill the phone for a while, then quickly try an sd flash (forget about usb flashing, if you are gonna fix it, its most likely sd that will do it),, trying various tmous stock roms (if you go in the tmous stock roms thread, DO NOT flash the first one in the list, , its not a real tmous rom and will brick you,, teh second and third would also be best avoided, with the manufacturing spl's, because going back to normal stock is tricky, , not impossible, but a pain none the less),, also have a play with hspl3 or 4, see if you can change the spl, because sometimes its the spl thats stuck, and not the radio (however sticking at 10% and not seeing anything next to RADIO_V2 - makes it almost certainly the radio,)
Nothing - no additional info besides the progress bar stuck at 10% described in 1st post and the SPL line did not change. I think the phone now has the exact info except there is nothing where serial was displayed before (yellow text info on red background) as my first post.
Omitted some steps: these are just steps to copy the ROM downloaded from Tmous website to the sd card for flashing (T-Mobile_HD2_MR_software_3.14.531.1.exe).
Yes, it's a Tmous. The void sticker is still there and the touch screen has the T-Mobile logo.
I knew that I had to flash Tmous ROM because HD2 Tmous has 1GB of ROM instead of the normal 512MB.
Unfortunately, most of shipped ROM links are broken. I wanted to try the 2.10.x.
Thank you for your help.
Hi everyone!
I am very sorry for such a n00b-post, but I really cannot find a solution.
The problem:
I recently got a HD2 of a friends who did not use it anymore, because Android suddently stopped working. Now it's stuck at a black screen [A] saying:
aMAGLDR V1.13
Build: Feb 1 2011 03:46:07
by Cotulla 2011
I tried resetting the phone using the red button near the battery, but it did not solve the problem. I am able to boot the HD2 into recovery-mode (colory screen) but then, after connecting to a pc it does not change from "serial" to "usb".
I have installed WMDC on my W7 64-bit system. I have also tried to use "RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship" (from the 4shared "shipped LEO roms"), but none of them recognises my HD2 neither in Recovery nor in the black screen [A].
Is this phone useless? What can I try to revive it?
What might be helpfull: when normally booting, the phone vibrates once during the HTC-screen and 5 times after the black screen [A] appears.
andrejazzz said:
The problem:
Android suddently stopped working. Now it's stuck at a black screen [A] saying:
aMAGLDR V1.13
Build: Feb 1 2011 03:46:07
by Cotulla 2011
I am able to boot the HD2 into recovery-mode (colory screen) but then, after connecting to a pc it does not change from "serial" to "usb".
I have installed WMDC on my W7 64-bit system. I have also tried to use "RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship" (from the 4shared "shipped LEO roms"), but none of them recognises my HD2 neither in Recovery nor in the black screen [A].
What might be helpfull: when normally booting, the phone vibrates once during the HTC-screen and 5 times after the black screen [A] appears.
Click to expand...
Click to collapse
Since you're unable to connect to PC, then you can't re-flash HSPL.
HSPL needed to force flash any shipped WM6.5 ROMs to HD2.
Then the only way is to flash original WM6.5 ROM for your device from uSD.
If you're not sure what CID, just download any HD2 shipped ROMs and try to flash from uSD.
Just be careful not to flash EU's ROM on T-Mobile device!
Extract the ".exe" file, then rename the ".nbh" file into "leo.nbh", copy that to root of uSD.
Power up your device while pressing vol down button.
Don't worry if the ROM refuse to flash, it's just a wrong CID.
But to make sure, connect your device to another clean PC (without android drivers inside, just WMDC), preferably a PC sets for syncing WP7/WP8 devices.
And make sure your device turns on by itself when charger is connected (auto turn on from off state).
That's just to make sure that usb connector is not damaged.
HD2 vibrate 1x at power on, it's normal.
Vibrate 5x after magldr shows up, I suspect something wrong with magldr or the ROM itself (corrupted or something).
Another possibility is some NAND bad blocks.
But if it's vibrate 5x at power on, then you have a bad luck.
The point is, flash the original ROM first.
If it's success, then flash HSPL.
After that, the rest is up to you..
Firstly, I want to thank you very much for your quick and extensive answer!
But I have only one tiny question: are these the ROMS which I can find at http: //www . 4shared . com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html#dir=MGRa1Cen ? And you mean I should just pick one and try?
You can also find HD2 shipped ROMs here.
Anything that has "TMO" are T-mobile ROMs, otherwise it's EU.
Again, don't flash EU's ROM on TMO devices!
The first 3 digit are the ROM version (1.66, 1.48. etc.), 3.14 is the latest WM6.5 ROM.
The next 3 digit are CID code (207, 404, 707, etc.).
Like I've said, if you don't know which CID for your HD2, then just download all ROMs from different CID then flash it one-by-one using uSD.
Thanks!
So far I have tried the 404 and 162 (edit: and 161, 911), but so far without luck. I'll keep you posted!
Tiny question: is it normal that I cannot shutdown in Recovery Mode?
Perhaps some useful info shown in Recovery:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Correct me if I'm wrong, but it looks like an EU HD2, TMO HD2 are rarely using hynix nand, made around late 2009 or early 2010.
Just try to flash ROM with CID for your friend's country first.
If failed, then try another CID.
There should be one or two info about CID number vs. country somewhere around.
Good luck!
Sent from my Windead Phone 7 using xda app-developers app
At this moment I have tried all the NLD roms with no result. Also I have tried roms from several european countries, but none of them works:/ Might it help if I give the serial number?
And what might be worth saying: my phone turns on when connected to AC power / wall-charger; when connected to charger the "serial" disappears...
Thanks for all your help!!!
Have you try connect to other PC?
When flasing ROM from uSD and failed, what error message you got?
If it's "CID mismatch" or something like that, than it's definitely a wrong CID.
If it's "ROM update error bla bla bla", it's most likely corrupted flash image or the uSD itself (use a small sized uSD, 1gb would be fine).
Even if you flash the correct CID, without removing HSPL first, it would still throw an error message "ROM update error bla bla bla" during flashing Radio.
Then it will restart and retry to flash again on it's own.
By the way, I don't know if there are ways to flash HSPL from uSD.
Or guide on how to make a "gold card".
I sugest you search it.
Worth to try if you couldn't find the correct CID for your device.
CID from serial number?
Yes, back in 2010/11 HTC site provides s/n checking for download the correct ROM.
But now it's gone.
Sent from my Windead Phone 7 using xda app-developers app
Thank you very, very much for helping such a newbie ^^
At this moment, I am able to get into the update-menu: I changed the filename to LEOIMG.nbh. The only problem is that all the Dutch images give the same error: 00018003 : Radio (V2) - FAIL.
What could I do to solve this error? Use the freezer-trick or wouldn't it make any sense?
edit: it does boot when I connect to another W7 pc with WMDC (replies " Not connected" ), only it automatically starts the update-procedure (which fails).
There are no such thing as newbie, that's why we need to learn.
Error 00018003 during Radio flash?
I have no idea what error is that.
But first, are you sure that your friend bought the phone on local shop?
I mean, not imported, or when he/she travel overseas, or has the mainboard swapped at HTC service center.
It happens to me when my second HD2 suddenly has no signal, about 2 years ago.
Brought it to local service center and they swapped the mainboard without telling me.
And the swapped mainboard has CID from 404 (europe), the original was 707 (indonesia).
Okay, back to error something.
WMDC won't recognize the phone unless it's a working WM6.5 device, or a working WP7 device with WP7 SDK + Zune installed on your PC.
Just put the phone into bootloader screen (3 color screen), then connect it to a clean PC.
Does the "Serial" changed to "USB"..?
If it does, reflash HSPL 2.08 using HSPL4 package.
Then flash Radio ROM only, 2.15.50.14 is a good one.
Again, an EU HD2 can use either EU's Radio ROM or T-Mobile's Radio ROM.
But a T-Mobile HD2 can only use a T-Mobile's ROM..!
If the "Serial" doesn't change to "USB" but on your PC makes sound like something is plugged in, open device manager and look for an unknown device (no drivers loaded).
Expand it, what does it says?
To be honest: I am not 100% sure that it is an European (Dutch) phone. What I saw when I opened the phone's back was that the warranty-seals on the screws were molested. I don't think he got the motherboard replaced: way to expensive in relation to a new phone...
The bootloader screen gives now the following text:
RUUNBH
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0X05
CotullaHSPL 0x40
Upgrade ROM error
Please try again
When I connected it to a clean pc, the phone booted and gave another upgrade-error, only this time on a black screen (I got the uSD out the phone).
After booting the phone and connecting to a pc the "serial" does not change to "usb"...
When I tried to install WMDC I get the error "Installationpackage not supported by processor". Seems like bullcrap, but there it ends. No yellow exclamation marks in Device Manager...
I have yet not tried to flash a T-Mobile ROM to the phone. I have tried all the NLD ROM's: 1.66.404 ; 1.48.404 ; 1.66.404 ; 3.14.404 ; 1.66.404 ; 1.43.404
I have yet not tried the other ROMs I downloaded, but I will tomorrow. To start 161 does not work.
Also: I cannot shutdown when in bootloader or MAGDLr, is that correct?
What colour are your call & end key buttons !
if white you have standard EU type model. T-Mobile EU models are same as any EU model & can flash any ROM/Radio
If green & red you have a T-Mobile USA model (TMOUS) & need correct ROM (found in HD2 Wiki)
T-Mobile USA model needs care as if flash wrong radio version you can brick it.
Flashing via SD card should be last choice as first stage of a SD card flash is install of the SPL to standard SPL from the nbh which means you have no CID bypass as HSPL gone.
ideally you need a Windows 7 32bit machine with a known working WMDC setup & try flashing a suitable rom once decided on EU or TMOUS device.
As you have HSPL on your HD2 already it will bypass CID if flash via PC so you can flash any CID code rom.
Try connecting device to PC (with known good WMDC) and use reset button on HD2 to boot to bootloader & see if get any luck in running ROM installer from PC.
If lucky the USB flash issue is PC & drivers rather than hardware on HD2.
I would suspect you have nand issues on HD2 or perhaps worse, if nand sometimes you can get it back if persistent & get something to flash completely.
Thanks MisterB for adds up.
So am I, suspected a nand issue.
The reason I want him to revert back to original SPL & Radio is to make sure that it's a nand related problems, not radio hardware problems.
If he managed to find the correct CID for his phone, he could easily reverts back in case somethings wrong in the future after playing with custom ROMs.
This also happens to my friend's phone a couple months ago.
But in her case, the bad blocks are definitely located where magldr resides, and many more on data partition.
She can flash shipped ROMs completely, but it refuses to boot.
Can't flash a WP7 ROM because magldr freezes when it's loading, can't even bring the menu screen.
She can run a native sd android build for a couple weeks, but then it acting strange again.
Then finally she just gave up and bought another phone.
@andrejazzz:
You can't shutdown on bootloader (3 color) screen.
Remove the battery is the only way to shutdown, or press the reset button to restart.
But you can shutdown/restart or anything else on magldr menu screen.
Press & hold power key right when magldr loads up (before it's start to "go go go").
In addition, you can download WMDC x86 version here, and x64 version here..
He may indeed need try SD flash but I would exhaust all options of USB cable flash via PC first as retaining HSPL will be useful to start with as any generic HTC ROM could be used for the USB cable flash.
If that is not possible then flashing via SD is only viable option & indeed many times only way get over bad boot/nand issues but with all the CID versions for HTC regions & operator branded regions you have a hard job knowing the right one, you could even try the right ROM & as it does not flash overlook it for further testing.
I see he has tried SD flashing but still has HSPL so either SD card is not best suited for nbh flashing or nand/hardware that bad even first stage of flash is not possible.
If I was testing this device & trying recovery I would probably try freezer test to cool device prior flashing & make good effort on USB flash before going on to SD card.
Most well used Android HD2s these days have nand or bga issues to some degree as android works the hardware so much harder than WM6.5.
You really need be sure PC & driver are known good for flashing & if going to SD flashing that SD card is suitable or you will waste a lot of time & effort.
Loads of links & tips for all the software & some threads are in the HD2 Wiki
I apologize for replying so late, but I have had no time: I had a few tests at school
@Mister B: I have a black HD2 with white icons, so I have a european model.
I have installed installed the X86 on a clean 32-bit system, but it does not recognize the phone. I have reinstalled the WMDC on my W7 64-bit system, but still it does not recognize the hd2. I have no other Windows Phones, so I am not able to verify the WMDC-installations.
When I connect to a pc, the phone boots and shows: "Software update failed! Please try again"
@Shadow_Nexus: Correct, that is exactly what happens. I do not completely understand what you mean with "Press & hold power key right when magldr loads up (before it's start to "go go go")", could you please explain?
@Mister B: How could I check if the SD-card might be the problem? It is a 16GB Class 4 Kingston SD. I have tried all the NLD-roms and other versions (random countries, not TMOUS). I have tried the freezer trick with a NLD-rom on a mSD, but it did not work.
Thanks for all your help!
Best using a 2gb or 4gb (8gb max) card for nbh flashing & do a proper fat32 format with something like hp format tool before using it.
link below may help:
http://forum.xda-developers.com/showthread.php?t=681317
Again, thank you very much for your reply. But: do you have any clue what ROM's I should try? I am asking this, because I have already tried all the NLD ROM's I found on the site @Shadow_Nexus gave in post #4, but every one of them returns the same error. Should I switch to another country and try, for example, all German ROM's?
I got my hands on another HD2 and when I connect that one to my pc it show up, named "HTC Sync". The bricked one still does not respond:/ Should I retry all the non-TMO roms I can find?
Edit: My brother "helped" me out and sold the phone...