S view case issues. Please help - Verizon Galaxy Note 3 Q&A, Help & Troubleshooting

I have an s view case that worked fine on the stock rom. After I installed beans v1 and v2 I couldnt get it to work anymore. Besides being a new rom, it is mj7 and has xposed baked in so it seems like there could be a lot of possible reasons. First, is there any kind of setting that needs to be set for it to work? Second. Is anyone else having issues or more specifically do you have it working on beans 2? Any help would be great.
Sent from my SM-N900V using Tapatalk

Related

Thanks to all the posters, but I need help..

First of all, thanks to all the guys who post on here and develop some of these great ROMs. I bought a Note 3 online that had a custom rom installed and no backup. The phone turned on and off and didn't work properly. Just reading these forums helped somebody who knew nothing about this stuff to somebody who was able to install the verizon stock back onto the phone, then root it, install safestrap and install two custom roms (jelly beans and lite). The phone works great with the exception of the following: when using the camera lines appear on the screen and show up sometimes on the pictures, secondly my gps is a little off and doesn't see exactly where I'm at and doesn't work properly. This is the same on both roms I boot from. Any help would be greatly appreciated. Thanks again.
Go back to stock and see if the problems persist. If so then it's the phone and not the rom.
Sent from my SM-N900V using Tapatalk
csstamatin said:
Go back to stock and see if the problems persist. If so then it's the phone and not the rom.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
The problem persists. I actually, read about disabling wifi and image stabilization and that's pretty much eliminated the lines when using the camera, but I can't figure out the issue with gps.
Download an app like gas status and see if that helps. Besides that just might be a defect.
Sent from my SM-N900V using Tapatalk

[INDEX][Everything you need to know][All In One Guide]

Welcome to the note 3 forums. We welcome you as long as you do your job and search before making 1,000,000 new threads.
So,You just got your shiny new note 3 and dont know where to begin?
Well that's ok because, this is the all in one thread.
Lets begin​
How do I Root?
That is the common question around here. Im going to simplify this.. Here you go
For 4.3
1.The best and safest way is this method by @evilpotatoman. It does require a little work but in return you do get root Here is the link for That,
2.Another method that is faster, but does not offer busybox with install, nor did it originate from XDA-forums is Here,
For 4.4 Or KitKat
You have to Go to My thread located
Here,
This does root KitKat and provides a custom ROM.
How Do I Install Custom Rom's
First What you should know is that our phone has a locked bootloader. This means that we can not boot kernels. But we still can flash custom rom's Thanks to @Hashcode
To install custom rom's on 4.3, Head over Here,
Another method That i originally created, but does not work as good as safestrap, could be found Here
If you are on KitKat, Then you could either install my KitKat rom or wait for safestrap to be updated.
What Do I Do If I Bricked My Phone? Or if it wont boot?
Well There are 2 methods to get you back to stock and running again.
To Restore back to Jellybean (4.3) Follow this Thread Here
To Restore back to KitKat (4.4.2) Follow this Thread Here
Why are Rom's Based off different Bases & Whats the difference?
A little basic intro
MJ5,MI9 & MI1 Are all 4.3 AT&T Bases
Ml2 Is an international 4.3 Base
MlG is a leaked AT&T 4.4.2 Base
Mj5 Is the latest 4.3 AT&T Base
Ml2 Is the latest international Base
The difference depends on what you need. Right now There are pro's and con's to all bases
Mj5
-Fast Data speeds
-Better indoor Signal
-No Bluetooth internet tethering
Ml2
-NO group messaging
-lower signal in areas
-slower data
-Does have Bluetooth internet tethering
Leaked Kitkat base (MIG)
-Extremely fast
-Newer modem with better signal & speeds
-Safestrap is not yet updated to work with kitkat (But you could still install my 4.4 ROM)
Why is my GPS Crappy and How do i fix it?
This issue is well known with our phone. The main reason is bad software coding.
To fix this issue Flash this fix made by me, in safestrap or manually push the files using root explorer.
4.3-Click Here
4.4-(Coming Soon)
What is "SafeStrap & Why do i have to use it?
Safestrap is our main method of flashing Rom's and could be found Here,
Always WIPE before flashing a new ROM or expect to receive errors. DON'T BE LAZY
Issues with safestrap
-Sometimes the storage is messed up and shows that you are using all your memory, when you really are not.If you use a different app to check, then you should see your real memory usage.
Where are all the kernels located?
Like i stated earlier, We don't have kernels yet, because of our locked bootloader
Where are all the Roms compatible with my phone?
All compatible and ready to install rom's could be found Here
There is currently NO AOSP,CM Based Rom's, So don't ask
What is KNOX and how does it effect me?
KNOX is basically made to **** us. But Samsung calls it security.
KNOX is removed from most custom Rom's. Knox does prevent root apps from working properly and should be removed asap.
How do I transfer My bookmarks from ROM to ROM?
Follow the guide i created Here
Im still working on a list of roms,and cool mods that are compatible with our phone. they will be located in the second post.Mods please sticky this thread​
For me, to post mods and roms compatible with our phone
one more
Great information.
Thank you very much.
I have tried your KitKat 4.4.2. Glad to see it is rooted!
Now, it is easy to switch between MJ5 4.3 and MLG 4.4.2 through SafeStrap and Odin.
Wow very nice! Hopefully this will prove helpful.
Sent from my SM-P600 using Tapatalk
I will send people here. Thanks man. Wish we could donate to you. I bet there is a bunch of people who would love to buy you some drinks or whatever your in to....Thanks again for being organized and detailed. You have your Sh** together and its great!!!
Awesome work. Me personally Im waiting for SS to be updated but definitely keeping an eye out.
Im curious on one thing. When you discuss Knox and to 'remove it', would freezing this via TB server the same purpose? Also since youve had a go with 4.4, does Samsungs iteration of 4.4 still have the GPS issues or did they fix it? Just curious
Thanks!
Guys where can I get the stock rom my N900A (Note 3 AT & T) now install version 4.4.2 filtered want to go back to stock!
Enviado desde mi SAMSUNG-SM-N900A mediante Tapatalk
Read the first post!!
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Thank you love your rom and glad to see you are so involved in the community
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
No problem buddy
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
hi, how do i manually fix push the GPS files?
So no root for sm900a. How can I load a custom rom without having to use a computer? Possible?
I really hate this thing as of right now wish I had my note 2 back
I found Ultimate rotation control but it fails to work properly
thanks, perfect thread for an android newbie :good:
Nix A Nerd 2 said:
So no root for sm900a. How can I load a custom rom without having to use a computer? Possible?
I really hate this thing as of right now wish I had my note 2 back
I found Ultimate rotation control but it fails to work properly
Click to expand...
Click to collapse
If you are referring to the N900A, thew is root! Just gotta search.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Thank you. Now my almost $800 Samsung Galaxy note 3 has basic gps working properly. Samsung needs to hire guys like you
only thing missing is how to back up and restore...
so if you want a new rom...youre good to go..
Wanting to down grade back to JB rom from KITKAT v2
I Used to be on JB rom 4.3 And I really liked it. But I wanted to upgrade to to KitKat v2 because alot of people said they liked it. After I upgraded to KITKAT 4.4.2 I really did not enjoy it as much JB 2.6. I used to get 35000 score from Antutu Benchmark but now on V2 I get about 30000 score. And I thought the JB 2.6 was setup nicer. I dunno, but what I do know is that I would like to go back to JB 2.6 because I think it was a nicer piece of work. Anyone know where I can find the tutorial to downgrade back to JB 2.6? I thought I seen it before but I cant seem to find it. Thank you for your time.
htsl
I have now soft bricked my phone I am lost and need help! no one last night would help me! PLEASE help me now!!! I am stuck on step 4 of http://forum.xda-developers.com/show....php?t=2559715
when I select "show all devices" it only list 2 "Samsung mobile usb cdc composite device" and " samsung mobile usb modem" what am I doing wrong????
some one on another thread said I am using the wrong drivers... where Do I find the correct drivers?
Thanks
Rick
Are you in download mode?
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

Screen Recording

Hey guys. I'm running into a quite annoying problem. I'm now unable to use any screen Recording app. I've tired 3 different ones and they all force close. I'm running Beans B6 and the latest version of SS. The beta version. Before this clean install which was a clean flash it was working on the "stable" version on SS and with Beans in slot 1. I went back to stock and re rooted then installed the latest version of SS and installed beans as stock. I'm hoping SS isn't the issue as I'd have to go back to stock unroot in order to start over. Any suggestions as to what might be causing this? I'm having zero other issues with any other app or anything. I don't even the flashbar FC some other Beans users are getting. Everything has been literally perfect until this came up. The last time I flashed by the way was the night B6 was released so I've been having great luck for some time. Any help would be greatly appreciated. Thanks in advance.
Sent from my SM-N900V using XDA app.
Note3 running Beans B6

[Q] samsung allshare cast dongle connection problems

I am trying to connect my At&t S4 to a Samsung Allshare hub for screen mirroring but it fails every time. I have tried a clean install with v38 of Goldeneye and did not flash any mods or change anything with the same end result. I did have it working throughout my use of several versions of Goldeneye but didint notice when i lost the functionality. Does anyone know of anything i can try to fix the probelm? Does anyone have it working on the goldeneye rom? Would appreciate ANY help as this one feature is all im missing because the Goldeneye rom is amazing!!
lakid06 said:
I am trying to connect my At&t S4 to a Samsung Allshare hub for screen mirroring but it fails every time. I have tried a clean install with v38 of Goldeneye and did not flash any mods or change anything with the same end result. I did have it working throughout my use of several versions of Goldeneye but didint notice when i lost the functionality. Does anyone know of anything i can try to fix the probelm? Does anyone have it working on the goldeneye rom? Would appreciate ANY help as this one feature is all im missing because the Goldeneye rom is amazing!!
Click to expand...
Click to collapse
Inn had the same issue, i returned mine because i read that the reason that it would not work is because i was rooted.on both my GS4 and my note 10.1 2014
Willibda1 said:
Inn had the same issue, i returned mine because i read that the reason that it would not work is because i was rooted.on both my GS4 and my note 10.1 2014
Click to expand...
Click to collapse
I came across that information too but i also found that other people with root were able to get it to work. It works with my brothers s4 and his is rooted but not running the same rom and his is for tmobile and mine is for at&t. I asked in the Goldeneye forum if anyone running the same rom was have the same issue but no response. Would appreciate any input, help or ideas. I have tried reflashing the rom several times and wiping several times.
lakid06 said:
I came across that information too but i also found that other people with root were able to get it to work. It works with my brothers s4 and his is rooted but not running the same rom and his is for tmobile and mine is for at&t. I asked in the Goldeneye forum if anyone running the same rom was have the same issue but no response. Would appreciate any input, help or ideas. I have tried reflashing the rom several times and wiping several times.
Click to expand...
Click to collapse
I tried it on my galaxy s4 stock with safe strap and my galaxy note 10.1. 2014. I had read I'm another android forum that rooted was the issue. So I returned it
Willibda1 said:
I tried it on my galaxy s4 stock with safe strap and my galaxy note 10.1. 2014. I had read I'm another android forum that rooted was the issue. So I returned it
Click to expand...
Click to collapse
Thanks appreciate the information. Ok let me ask a different question does anybody have the allshare screen mirroring feature working on Goldeneye?? or any other rom? with root? I just want to make sure its not possible on GE rom because i dont want to change roms but i need that feature to work. Thanks.
lakid06 said:
Thanks appreciate the information. Ok let me ask a different question does anybody have the allshare screen mirroring feature working on Goldeneye?? or any other rom? with root? I just want to make sure its not possible on GE rom because i dont want to change roms but i need that feature to work. Thanks.
Click to expand...
Click to collapse
I don't know if this help, but I have note 10.1 and had same problem as long as I had not stock kernel.
Sent from my SAMSUNG-SM-G900A using XDA Premium HD app

Aio galaxy s4 root and recovery?? I337z

So I have another galaxy s4 in the house and it's code name is jflteaio i337z but the thing is the model number is the same as crickets galaxy s4 so dose that mean I could root it and download twrp recovery for it in the name of the Cricket model?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Plz I need help
Sent from my SAMSUNG-SGH-I337 using Tapatalk
itzdajosh said:
So I have another galaxy s4 in the house and it's code name is jflteaio i337z but the thing is the model number is the same as crickets galaxy s4 so dose that mean I could root it and download twrp recovery for it in the name of the Cricket model?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
I have an SGH-i337z on Cricket and I was able to root and install TWRP using hroark13's method (http://forum.xda-developers.com/gal...cket-aio-sgh-i337z-jflteaio-twrp-2-7-t2858698)
I've been trying various CM builds, the Google Play Edition ROM and PACMAN, but they all seem to have issues (5GHz WiFi, one app or another not working properly, notification glitches). To be fair, they are AT&T ROMs. Also, it takes a bit of work to install as you have to remove the asserts line from each ROM before installing. But if you just want to root and use TWRP to backup it works fine!
timebear said:
I have an SGH-i337z on Cricket and I was able to root and install TWRP using hroark13's method (http://forum.xda-developers.com/gal...cket-aio-sgh-i337z-jflteaio-twrp-2-7-t2858698)
I've been trying various CM builds, the Google Play Edition ROM and PACMAN, but they all seem to have issues (5GHz WiFi, one app or another not working properly, notification glitches). To be fair, they are AT&T ROMs. Also, it takes a bit of work to install as you have to remove the asserts line from each ROM before installing. But if you just want to root and use TWRP to backup it works fine!
Click to expand...
Click to collapse
Just out of curiosity, was the GPE ROM you tried the Lollipop one? Also, are there any roms for this phone that work well and stable in your experience?
I haven't tried any lollipop roms yet. The 4.4.4 kitkat GPE ROM was stable with the exception of breaking a music streaming app I use (subsonic). It was also the only ROM that identified the carrier as Cricket instead of AT&T.
Pacman I didn't really like so i can't speak much for its stability.
CM11 can be hit or miss. The nightly seem more stable than the stable or milestone versions usually, but one gave me 5GHz wifi problems. I was never able to use 5GHz with the milestone I tried.
Right now i am using 12/13 nightly CM11 and it has been running very well. I really like the slider shortcuts on the CM lock screen, so I'll probably just stick with CM.
timebear said:
I haven't tried any lollipop roms yet. The 4.4.4 kitkat GPE ROM was stable with the exception of breaking a music streaming app I use (subsonic). It was also the only ROM that identified the carrier as Cricket instead of AT&T.
Pacman I didn't really like so i can't speak much for its stability.
CM11 can be hit or miss. The nightly seem more stable than the stable or milestone versions usually, but one gave me 5GHz wifi problems. I was never able to use 5GHz with the milestone I tried.
Right now i am using 12/13 nightly CM11 and it has been running very well. I really like the slider shortcuts on the CM lock screen, so I'll probably just stick with CM.
Click to expand...
Click to collapse
So cm is working good for you, and if not is there any good Roms available?
itzdajosh said:
So cm is working good for you, and if not is there any good Roms available?
Click to expand...
Click to collapse
Yes, CM11 is working great! If anything is broken I haven't come across it yet. There are certainly a lot available and any unified or AT&T ROM should work (no need for safestrap), so feel free to try out anything that looks good! I liked GPE and it seemed to work really well until I found it didn't work with one app I use occasionally (subsonic). You might not have any issues with apps you use. I also seemed to get better battery life with GPE. The wifi issue I had with an older CM11 build seems to have been fixed, so that's working well now. The author of the root I used seems to like Skyfall, so you could go that way if you like touchwiz.
Have some fun trying out a couple, and make a backup before installing something different so you can easily go back if you decide you liked one better.
timebear said:
Yes, CM11 is working great! If anything is broken I haven't come across it yet. There are certainly a lot available and any unified or AT&T ROM should work (no need for safestrap), so feel free to try out anything that looks good! I liked GPE and it seemed to work really well until I found it didn't work with one app I use occasionally (subsonic). You might not have any issues with apps you use. I also seemed to get better battery life with GPE. The wifi issue I had with an older CM11 build seems to have been fixed, so that's working well now. The author of the root I used seems to like Skyfall, so you could go that way if you like touchwiz.
Have some fun trying out a couple, and make a backup before installing something different so you can easily go back if you decide you liked one better.
Click to expand...
Click to collapse
Thanks for the help! And one other thing, can you try out cm12 so I can get that.. And then tell me if it's behaving good with the phone.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
FWIW, I've gotten Goldeneye, Skyfall and stock T-mobile running on my i337z with TWRP. I figured out that I needed to flash my phone's modules after flashing a touchwiz ROM for it to boot and run correctly. My i337z is on ND3. I uploaded the ND3 and NE2 modules in this post: http://forum.xda-developers.com/showpost.php?p=57407130&postcount=75.
bonchien said:
FWIW, I've gotten Goldeneye, Skyfall and stock T-mobile running on my i337z with TWRP. I figured out that I needed to flash my phone's modules after flashing a touchwiz ROM for it to boot and run correctly. My i337z is on ND3. I uploaded the ND3 and NE2 modules in this post: http://forum.xda-developers.com/showpost.php?p=57407130&postcount=75.
Click to expand...
Click to collapse
Yeah I'm on 4.2.2
Sent from my SAMSUNG-SGH-I337 using Tapatalk

Categories

Resources