Hello
I formatted /sdcard on recovery mode by mistake, was going to format /data, /system and /cache
now I lost all of my backup and ROM files and my N7 stuck at Google icon when reboot.
recovery and bootloader can still access....if that help.
Any way i can get my baby to boot up like it used to be? or How to put files back to N7? (maybe I can install the ROM if it's there?)
Thanks in advance >___<
First make sure you have the Nexus 7 plugged into a PC while attempting to start bootloader and choosing recovery. You might be able to do a factory reset from there. Wipe data, cache and dalvik. You may want to hit 'Fix Permissions' last just in case, then reboot. If you're familiar with ADB and fastboot you can find info on flashing stock images here http://forum.xda-developers.com/showthread.php?t=1907796. If neither of those helps you'll need to go to this post http://forum.xda-developers.com/showthread.php?t=1766475, download and install the toolkit and choose 'Flash Stock + Unroot' with the option 'Soft-Bricked, Bootloop' (assuming that is still the case) checked. It will ask which image to download, pick the latest (4.1.2). You shouldn't have to relock the bootloader. From there it's just like stock so play with it as you like, just watch what you're wiping, lol.
Thank you very much!!!!
everything work now.
So i downloaded TWRP 2.8.2.0 on my Nexus 7 4.3.3, i was rooted and everything. Then wiped my system in recovery.
After that i went to Advanced wipe and changed all the partitions to f2sf except internal storage, i was then going to flash my Slimkat rom, but then i couldnt access any folder! Tried a reboot but now it wont start... Can acces fastboot and so, but what do i do??
EDIT: So now i wiped them back to ext4, but when i pressed reboot twrp sais i had no OS installed? What to do?
Thanks for any help
You can still go back to the bootloader I assume so when you're on it connect your Nexus to your computer and run the Nexus Toolkit to flash Google Factory Image. Then you'll have to do the same steps as before, reflash a recovery, root and then flash the rom you want to use.
Hello everyone.
I am new owner of an S7 Edge and so I root it is ok!
I have installed a recovery version 3.0.2.4 this is ok too but I have a concern to make a full backup.
1 - When starting recovery I have a screen that says "Installing zips or operations via adb may change the system partition".
2 - When I want to do a backup I have these 03 options that are checked.
Booting
System
Data
But when I drag to make this backup I have error messages
Here are the images to better understand.
I think I have forgotten something, could you orient me please?
Thank you for your help.
encrypted data...... so if you want do a backup try out flashfire......
Working fine with flashfire !!
But there is still the solution of real recovery?
How to decrypt the data?
To make a backup?
Thanx !
1. Reboot to TWRP, Wipe > Format Data > Type 'yes'. This will wipe all the data on your phone including internal storage.
2. Don't reboot, and flash either SuperSU or one of the zips from here (latest version would be preferred). Since you have to wipe your internal storage in the previous step, put the zip in your external sdcard beforehand or flash it through adb sideload if you know how to.
Be careful when flashing stock firmware with odin, as it will automatically encrypt your device again. After you flash stock firmware, reboot directly into download mode again, flash TWRP, reboot to TWRP, and then follow step 2.
Hi !
I will download a stock rom in case of problem and I come back to give the results.
Big thanks !!! :good: :good:
kykint said:
1. Reboot to TWRP, Wipe > Format Data > Type 'yes'. This will wipe all the data on your phone including internal storage.
2. Don't reboot, and flash either SuperSU or one of the zips from here (latest version would be preferred). Since you have to wipe your internal storage in the previous step, put the zip in your external sdcard beforehand or flash it through adb sideload if you know how to.
Be careful when flashing stock firmware with odin, as it will automatically encrypt your device again. After you flash stock firmware, reboot directly into download mode again, flash TWRP, reboot to TWRP, and then follow step 2.
Click to expand...
Click to collapse
Work perfectely very very good !
Thanks for answers !!
Good day!
Our country just received the Oxygen OS 5.0.1 update.
How can I install it with an unlocked bootloader?
I was going to relock it but I found out that if I did, my data will be gone.
The only difference in the set-up of my phone from a stock OP5 is the unlocked bootloader.
Flash through stock recovery
Hitman478™ said:
Flash through stock recovery
Click to expand...
Click to collapse
I haven't done this kind of thing yet.
If I do this, will my data be wiped out or not?
What about using the OTA notification ?
quick05 said:
What about using the OTA notification ?
Click to expand...
Click to collapse
What do you mean?
I tried to update my phone using the normal way but after downloading and tried to install it, it failed because my bootloader is unlocked.
I just made a backup of data using codeworkx recovery. Copied the backup (Along with the files on userdata I wanted to keep) to my PC.
Wiped all and formatted data. Then installed Oreo and copied back the files and data backup from the pc to the phone and restored data with codeworkx recovery again.
Then flashed magisk 15.2 and rebooted.
Everything working fine now.
shriekyphantom said:
Good day!
Our country just received the Oxygen OS 5.0.1 update.
How can I install it with an unlocked bootloader?
I was going to relock it but I found out that if I did, my data will be gone.
The only difference in the set-up of my phone from a stock OP5 is the unlocked bootloader.
Click to expand...
Click to collapse
I managed to flash Nougat without locking my bootloader. But I also had to Format the Data partition to make it work. I used Titanium Backup to backup the data of the Apps and Myapplist to make a list of the apps. After installing Oreo I only needed to spent 1 hour to restoring the app data.
pleomaxell said:
I managed to flash Nougat without locking my bootloader. But I also had to Format the Data partition to make it work. I used Titanium Backup to backup the data of the Apps and Myapplist to make a list of the apps. After installing Oreo I only needed to spent 1 hour to restoring the app data.
Click to expand...
Click to collapse
Hello, I'm interested in the same thing.. I have oxygen osv4.5.x received notice for is 5.0.1 and want to install. I have an unlocked bootloader and am also rooted w/magisk. I want to keep my unlocked bootloader and root after upgrading. I also want to do a "clean" install.
Can anyone provide detail instructions, including best back up method of data and links to any files needed (twrp, magisk, etc) thanks
jmoricone said:
Hello, I'm interested in the same thing.. I have oxygen osv4.5.x received notice for is 5.0.1 and want to install. I have an unlocked bootloader and am also rooted w/magisk. I want to keep my unlocked bootloader and root after upgrading. I also want to do a "clean" install.
Can anyone provide detail instructions, including best back up method of data and links to any files needed (twrp, magisk, etc) thanks
Click to expand...
Click to collapse
This is what I did:
Downloaded OnePlus5Oxygen_23_OTA_028_all_1801031502_04d7cc5. zip, twrp-3.2.1-0-universal-codeworkx-cheeseburger.img and Magisk-v15.3.zip.
Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP.
Rebooted to TWRP again to make sure that my TWRP was updated.
Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
This deleted my Internal Storage so I had to backup everything beforehand.
Then used advanced wipe to wipe Cache and Dalvik.
Mounted the internal storage by using the Mount option from TWRP main menu.
I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
Copied the OnePlus full update and Magisk zip file.
Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots.
Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
Booted into TWRP and flashed Magisk.
I am now on Oreo and I hate the way Ambient Display looks right now.
pleomaxell said:
This is what I did:
Downloaded OnePlus5Oxygen_23_OTA_028_all_1801031502_04d7cc5. zip, twrp-3.2.1-0-universal-codeworkx-cheeseburger.img and Magisk-v15.3.zip.
Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP.
Rebooted to TWRP again to make sure that my TWRP was updated.
Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
This deleted my Internal Storage so I had to backup everything beforehand.
Then used advanced wipe to wipe Cache and Dalvik.
Mounted the internal storage by using the Mount option from TWRP main menu.
I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
Copied the OnePlus full update and Magisk zip file.
Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots.
Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
Booted into TWRP and flashed Magisk.
I am now on Oreo and I hate the way Ambient Display looks right now.
Click to expand...
Click to collapse
Thank you... I like everything about my current build..should I wait to upgrade... Any other issues with Oreo?
jmoricone said:
Thank you... I like everything about my current build..should I wait to upgrade... Any other issues with Oreo?
Click to expand...
Click to collapse
I honestly dont see a big difference yet, but only had it for two days. Feels a bit snappier, my signal a bit stronger, and probably an improvement with battery life. I had issues upgrading but then again I flashed the wrong version of magisk. I think the most important thing is the latest android security update.
SysAdmNj said:
I honestly dont see a big difference yet, but only had it for two days. Feels a bit snappier, my signal a bit stronger, and probably an improvement with battery life. I had issues upgrading but then again I flashed the wrong version of magisk. I think the most important thing is the latest android security update.
Click to expand...
Click to collapse
Hey, thanks.. I will update later today. I see you provided which version of twrp (twrp-3.2.1-0-universal-codeworkx-cheeseburger.img). But what is the difference between the version you noted and the one I found (twrp-3.2.1-0-oreo-8.0-codeworkx-cheeseburger.img)
I want to make sure I have the correct version.
Thanks again
jmoricone said:
Hey, thanks.. I will update later today. I see you provided which version of twrp (twrp-3.2.1-0-universal-codeworkx-cheeseburger.img). But what is the difference between the version you noted and the one I found (twrp-3.2.1-0-oreo-8.0-codeworkx-cheeseburger.img)
I want to make sure I have the correct version.
Thanks again
Click to expand...
Click to collapse
You can ask that question on the TWRP thread. May be they can answer it correctly. I guessed that twrp-3.2.1-0-universal-codeworkx-cheeseburger.img was for both Nougat and Oreo and that is why I used it. So, if you want to be sure you should ask that on a TWRP thread.
pleomaxell said:
This is what I did:
Downloaded OnePlus5Oxygen_23_OTA_028_all_1801031502_04d7cc5. zip, twrp-3.2.1-0-universal-codeworkx-cheeseburger.img and Magisk-v15.3.zip.
Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP.
Rebooted to TWRP again to make sure that my TWRP was updated.
Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
This deleted my Internal Storage so I had to backup everything beforehand.
Then used advanced wipe to wipe Cache and Dalvik.
Mounted the internal storage by using the Mount option from TWRP main menu.
I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
Copied the OnePlus full update and Magisk zip file.
Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots.
Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
Booted into TWRP and flashed Magisk.
I am now on Oreo and I hate the way Ambient Display looks right now.
Click to expand...
Click to collapse
Hello, I was reviewing the process and just downloaded everything onto my computer and transferred onto my phone but have a few questions regarding some of the steps.
* Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP
** Can I update TWRP via the official app and is that version of TWRP okay to use over the "twrp-3.2.1-0-universal-codeworkx-cheeseburger.img"
* Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes' / This deleted my Internal Storage so I had to backup everything beforehand.
** How, what and where did you back up your data? Because later you mentioned "deleted my Internal Storage". I am guessing that because the OP5 does not have an external SD card everything is wiped and the new OS 5.0.1 needs to be saved onto a computer and then re-transferred back onto the phone. I am also guessing that the backup will need to be saved onto a computer as after wiping the phone it would also delete that file too, correct?
* Mounted the internal storage by using the Mount option from TWRP main menu.
** I am assuming that this option after the data wipe is self explanatory?
* I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
** This is what makes be believe all the files should be on a computer. How did you reboot and when you did, does it go directly / back to TWRP?
* Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots. / Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
** I am guessing here that once OS v8 is installed the TWRP img is no longer on the phone. I would need to transfer the TWRP back onto the phone then re-flash? Could I just install the TWRP official app and flash that way?
Thanks
jmoricone said:
Hello, I was reviewing the process and just downloaded everything onto my computer and transferred onto my phone but have a few questions regarding some of the steps.
* Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP
** Can I update TWRP via the official app and is that version of TWRP okay to use over the "twrp-3.2.1-0-universal-codeworkx-cheeseburger.img"
* Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes' / This deleted my Internal Storage so I had to backup everything beforehand.
** How, what and where did you back up your data? Because later you mentioned "deleted my Internal Storage". I am guessing that because the OP5 does not have an external SD card everything is wiped and the new OS 5.0.1 needs to be saved onto a computer and then re-transferred back onto the phone. I am also guessing that the backup will need to be saved onto a computer as after wiping the phone it would also delete that file too, correct?
* Mounted the internal storage by using the Mount option from TWRP main menu.
** I am assuming that this option after the data wipe is self explanatory?
* I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
** This is what makes be believe all the files should be on a computer. How did you reboot and when you did, does it go directly / back to TWRP?
* Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots. / Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
** I am guessing here that once OS v8 is installed the TWRP img is no longer on the phone. I would need to transfer the TWRP back onto the phone then re-flash? Could I just install the TWRP official app and flash that way?
Thanks
Click to expand...
Click to collapse
You have to flash TWRP by going to fastboot mode .
If you are rooted only then the TWRP app works
Aarju said:
You have to flash TWRP by going to fastboot mode .
If you are rooted only then the TWRP app works
Click to expand...
Click to collapse
Yes I am currently rooted. Once I flash the new OS will I still have root access to use the TWRP official app? Is that why after flashing new OS you need to flash TWRP via fastboot?
What about the backing up? I also have full titanium, thanks.
jmoricone said:
Yes I am currently rooted. Once I flash the new OS will I still have root access to use the TWRP official app? Is that why after flashing new OS you need to flash TWRP via fastboot?
What about the backing up? I also have full titanium, thanks.
Click to expand...
Click to collapse
After flashing the new rom you will be flashed stock recovery and you have to flash it through fastboot and flash magisk again.
Aarju said:
After flashing the new rom you will be flashed stock recovery and you have to flash it through fastboot and flash magisk again.
Click to expand...
Click to collapse
Hello, I followed the following instructions:
4. Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
6. Then used advanced wipe to wipe Cache and Dalvik.
7. Mounted the internal storage by using the Mount option from TWRP main menu.
8. I (also) was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
9. Copied the OnePlus full update and Magisk zip file.
I went to install the update w/in twrp and now I get an error message:
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/oneplus5oxygen_23_OTA_028.....
What happened? Anyone please help...
jmoricone said:
Hello, I followed the following instructions:
4. Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
6. Then used advanced wipe to wipe Cache and Dalvik.
7. Mounted the internal storage by using the Mount option from TWRP main menu.
8. I (also) was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
9. Copied the OnePlus full update and Magisk zip file.
I went to install the update w/in twrp and now I get an error message:
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/oneplus5oxygen_23_OTA_028.....
What happened? Anyone please help...
Click to expand...
Click to collapse
Wipe data and then copy the rom full zip flash it boot it to the starting screen then boot to recovery and then flash magisk ,you will see no errors.
Hello, I followed the following instructions:
4. Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
6. Then used advanced wipe to wipe Cache and Dalvik.
7. Mounted the internal storage by using the Mount option from TWRP main menu.
8. I (also) was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
9. Copied the OnePlus full update and Magisk zip file.
I went to install the update w/in twrp and now I get an error message:
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/oneplus5oxygen_23_OTA_028.....
What happened? Anyone please help...
I received the following tip
"Wipe data and then copy the rom full zip flash it boot it to the starting screen then boot to recovery and then flash magisk ,you will see no errors."
But this makes no sense to me.
I have formatted my phone / wiped data / have the full rom & magisk on my "/sdcard" / went to install zip via TWRP, selected the rom and received the error message.
I decided to just go and upgrade via OTA and that failed. My phone has rebooted back to stock
what am i doing wrong?
Hey there great people out there!
Can somebody provide me the correct instructions for installing any Oreo ROM? It's not that I am lazy to search, believe me I have tried But problems came like Internal storage is not showing up on twrp(encrypted).Thanks a lot!BTW I'm on marshmallow right now,so please provide on how to update from marshmallow ?
Tech x 125 said:
Hey there great people out there!
Can somebody provide me the correct instructions for installing any Oreo ROM? It's not that I am lazy to search, believe me I have tried But problems came like Internal storage is not showing up on twrp(encrypted).Thanks a lot!BTW I'm on marshmallow right now,so please provide on how to update from marshmallow ?
Click to expand...
Click to collapse
You said you are on marshnallow.. Detailed step below.
1. Update to the latest nougat firmware using ota. Because lateat firmware is needed for oreo roms. Else you will face tons of bugs and problems.
2. Download recovery from same thread of the oreo rom you are using. Oreo roms need vendor partition, so it needs recovery that supports it.
Download the rom and gapps also.
5. Copy the rom, recovery image and gapps into the memory card. Boot into fastboot mode. Connect to pc. You can boot to fastboot by using command "adb reboot fastboot" without quotes.
4. Unlock the bootloader by connecting to pc via fastboot.(steps to unlock is given in the xda guide section or k6 power.)
5. Boot into twrp recovery image using fastboot. Your phone will reboot to recovery.
6. Using recovery install the recovery image from it by going to "install option" then selecting file type as image and selecting recovery image file.
7. Reboot recovery.
8. Format data to remove encryption. After that you can access internal storage. Wipe data, cache, dalvic cache, system, data and internal storage.
9. Flash the rom file. Flash the gapps.
10. Reboot to system from twrp.
If you can understand any steps above you can google. If you cant understand google, then forget about doing it. Because you will eventually break your phone. Give it to someone who knows in that case.
Lol I will not brick my device.I can get back to marshmallow anytime!The only problem I was having before was the device wouldn't show anything(0mb) on internal storage on booting in the ROM.Is this normal.Maybe the ROM is encrypted.On nougat this is not happening on any ROM.Currently Iam on nougat(stock).It shows internal storage only after formatting data but reinstalling the ROM and booting again in recovery it shows 0mb on internal storage.
Tech x 125 said:
sk.vyshak said:
You said you are on marshnallow.. Detailed step below.
1. Update to the latest nougat firmware using ota. Because lateat firmware is needed for oreo roms. Else you will face tons of bugs and problems.
2. Download recovery from same thread of the oreo rom you are using. Oreo roms need vendor partition, so it needs recovery that supports it.
Download the rom and gapps also.
5. Copy the rom, recovery image and gapps into the memory card. Boot into fastboot mode. Connect to pc. You can boot to fastboot by using command "adb reboot fastboot" without quotes.
4. Unlock the bootloader by connecting to pc via fastboot.(steps to unlock is given in the xda guide section or k6 power.)
5. Boot into twrp recovery image using fastboot. Your phone will reboot to recovery.
6. Using recovery install the recovery image from it by going to "install option" then selecting file type as image and selecting recovery image file.
7. Reboot recovery.
8. Format data to remove encryption. After that you can access internal storage. Wipe data, cache, dalvic cache, system, data and internal storage.
9. Flash the rom file. Flash the gapps.
10. Reboot to system from twrp.
If you can understand any steps above you can google. If you cant understand google, then forget about doing it. Because you will eventually break your phone. Give it to someone who knows in that caseencryptedThanks Man!
Lol I will not brick my device.I can get back to marshmallow anytime!The only problem I was having before was the device wouldn't show anything(0mb) on internal storage on booting in the ROM.Is this normal.Maybe the ROM is encrypted.On nougat this is not happening on any ROM.Currently Iam on nougat(stock).It shows internal storage only after formatting data but reinstalling the ROM and booting again in recovery it shows 0mb on internal storage.
Click to expand...
Click to collapse
Reinstalling the rom means it is again getting encrypted. By default encryption is on in stock rom. So you have to format data to break encryption. Otherwise you cant access internal storage. You need latest firmware (nov security patch) for oreo roms.
Click to expand...
Click to collapse
thanks
sk.vyshak said:
You said you are on marshnallow.. Detailed step below.
1. Update to the latest nougat firmware using ota. Because lateat firmware is needed for oreo roms. Else you will face tons of bugs and problems.
2. Download recovery from same thread of the oreo rom you are using. Oreo roms need vendor partition, so it needs recovery that supports it.
Download the rom and gapps also.
5. Copy the rom, recovery image and gapps into the memory card. Boot into fastboot mode. Connect to pc. You can boot to fastboot by using command "adb reboot fastboot" without quotes.
4. Unlock the bootloader by connecting to pc via fastboot.(steps to unlock is given in the xda guide section or k6 power.)
5. Boot into twrp recovery image using fastboot. Your phone will reboot to recovery.
6. Using recovery install the recovery image from it by going to "install option" then selecting file type as image and selecting recovery image file.
7. Reboot recovery.
8. Format data to remove encryption. After that you can access internal storage. Wipe data, cache, dalvic cache, system, data and internal storage.
9. Flash the rom file. Flash the gapps.
10. Reboot to system from twrp.
If you can understand any steps above you can google. If you cant understand google, then forget about doing it. Because you will eventually break your phone. Give it to someone who knows in that case.
Click to expand...
Click to collapse
thanks