Hi there
After flashing stock firmware mj7 phn
My status changed to enforcing it was perm. Before
Does anyone has a idea?
Sorry i cant help u but what difference would SELinux permissive make for you?
leave a 'thanks' if i helped
SM-N9005 URDLV 0x0
XDA Developers 4 premium app
I dont know but i noticed the change
Would flashing stock kernel void knox?
Related
After root,my knox warranty was void...I was sad bt ok...then I came to knw I cant get ota any more..still ok...But knw One handed operation feature is not working..everything else is fine...bt I hate this root...PLEASE APP DEVLOPERS OR CHAINFIRE...please bbring CF-AUTO UNROOT app...so that my phone..goes back to prev state...I WILL PAY ANY AMOUNT FOR THE APP AND SO WILL OTHERS...I request for it frm everybody...ur app will be sold Hugely.I even paid for ur root app bt iM now stuck.HELP EVERYBODY
Chill down mate, just flash stock with odin v3.09 and everything is okay
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Stock Odin will reset Knox to zero?
Sent from my SM-N900T using Tapatalk
jason370 said:
Stock Odin will reset Knox to zero?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Fraid not, once tripped to 0x1 there's no return currently.
Wont get 0x1 but stock, unroot and binary official
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Hello,
I am using SGN 3 9005
on KNOX Counter 0×0
Kernal 0×0
Build Number
N9005XXUDMJ7
can roll back to any another version like J4 or older, using ODIN?
without any counter be effected?
please advice
thanks
baherkilani said:
Hello,
I am using SGN 3 9005
on KNOX Counter 0×0
Kernal 0×0
Build Number
N9005XXUDMJ7
can roll back to any another version like J4 or older, using ODIN?
without any counter be effected?
please advice
thanks
Click to expand...
Click to collapse
NO... It's pretty much all over the forums that MJ7 can't be rolled back.
yeah i did
ultramag69 said:
NO... It's pretty much all over the forums that MJ7 can't be rolled back.
Click to expand...
Click to collapse
I did it just fine when first flashing a rom (came from latest update, have flashed jellybean, hyper, etc.) I'd try to just try flashing a rom after a clean/wipe with Safestrap. I went down as far as MK7. I think I had to flash the stock .pit file with odin one time to make it happen one time when I soft bricked
I remember reading that the odds of triggering a knox counter with a certain app over PC (rhymes with lingo) is something like 1-10,000.
So now there is no way to roll back ?
baherkilani said:
So now there is no way to roll back ?
Click to expand...
Click to collapse
Nope! You can't rool back. You will soft brick ur phone using ODIN and even if youflash a custom ROM based on that older base, it won't boot.
If you are rooted with urdlv and kept the old bootloader it is possible with mobile odin, else no way
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
If you are rooted with urdlv and kept the old bootloader it is possible with mobile odin, else no way
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
my bootloader is MJ1 i want flash MJ7 and no change bootloader! URDLV works on MJ7? mobile odin dont trigger knox ?
Mop wont flash bootloaders -> no knox trip.
Make sure u tick "everroot"
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
I'm on the MJ6 software. If I were to use Kingo, would my Knox still be 0x0?
Nope, from what i read it will trip knox.
hit 'thanks' if i helped you
SM-N9005 0x0 X-Note7 ML2
XDA Developers 4 premium app
Think the exploit was closed after MJ3 - so don't think it works... I may be wrong however
radicalisto said:
Think the exploit was closed after MJ3 - so don't think it works... I may be wrong however
Click to expand...
Click to collapse
Damn! Stuck without root then
Might just **** Knox off.
Yeah, installed CF Auto root
Hi everyone
Can we switch Selinux to permissive without triggering knox
And will flashing a kernal through mobileOdin trigger Knox ?
Thanks in advance
Sent from my SM-G900F using XDA Premium 4 mobile app
darkmanz said:
Can we switch Selinux to permissive without triggering knox
And will flashing a kernal through mobileOdin trigger Knox ?
Click to expand...
Click to collapse
It has been done, but as it is closely tied to the kernel you shouldn't count on being able to do so. Normally a custom kernel goes hand in hand with permissive rights.
A custom kernel will still trip Knox when the signature is checked during boot.
.
if it has been done and Knox wasn't tripped this means that the signature is still stock
Which means we only need a kernal dump from the device in which it was done
Am I wrong ?
Sent from my SM-G900F using XDA Premium 4 mobile app
You're wrong because you're making an incorrect assumption.
It wasn't a flawed kernel with a valid signature, but rather an exploit that bypassed the signature check altogether. An exploit that is no longer possible.
.
As the title says I would like to revert back to Official Status, remove root and stay on Knox 0x0
I have 4.3 version, Knox 0x0, and I have reset to factory defaults and I do not have root now.
As knox is 0×0 it means you are not rooted.Just flash official firmware will solve your status.flash it wia odin.
Sent from my SM-N900 using Tapatalk
meetpatel said:
As knox is 0×0 it means you are not rooted.Just flash official firmware will solve your status.flash it wia odin.
Sent from my SM-N900 using Tapatalk
Click to expand...
Click to collapse
Are you sure? I thought towelroot keepa 0x0
*_*
I hope that is repairing guarantee and make it even if 0x0 was developed by Root
AO7 said:
Are you sure? I thought towelroot keepa 0x0
Click to expand...
Click to collapse
Put your phone in download mode,now see the status of knox if it is 0×0 your phone is not rooted.just flash latest official firmware.sure it will change your status to official.
Sent from my SM-N900 using Tapatalk
meetpatel said:
Put your phone in download mode,now see the status of knox if it is 0×0 your phone is not rooted.just flash latest official firmware.sure it will change your status to official.
Sent from my SM-N900 using Tapatalk
Click to expand...
Click to collapse
No. False. Knox flag DOES NOT mean you're not rooted if it's 0x0.
The only times this is true is if root using a method that rewrites your recovery, such as CF-Auto-Root.
The only things that trip knox are unsigned recoveries (ANY custom recovery) and custom kernels (ANY custom kernel).
Sent from my leanKernel 3.7 powered stock 4.4.2 (NF4) SM-N900T
toastido said:
No. False. Knox flag DOES NOT mean you're not rooted if it's 0x0.
The only times this is true is if root using a method that rewrites your recovery, such as CF-Auto-Root.
The only things that trip knox are unsigned recoveries (ANY custom recovery) and custom kernels (ANY custom kernel).
Sent from my leanKernel 3.7 powered stock 4.4.2 (NF4) SM-N900T
Click to expand...
Click to collapse
Ohh..tnx for correcting me.!But I think the problem is status of device. As knox is 0×0 there is no problem.knox is not triggered. Flashing a stock firmware changes the status custom to official. Please correct me if I am understanding wrong!
Sent from my SM-N900 using Tapatalk
meetpatel said:
Ohh..tnx for correcting me.!But I think the problem is status of device. As knox is 0×0 there is no problem.knox is not triggered. Flashing a stock firmware changes the status custom to official. Please correct me if I am understanding wrong!
Sent from my SM-N900 using Tapatalk
Click to expand...
Click to collapse
Correct. Flashing a full stock firmware AFTER a factory reset and wipe should return to official status, officially.
Sent from my leanKernel 3.7 powered stock 4.4.2 (NF4) SM-N900T