Hello,
i have been reading guides all the day and no-one had a solutions to my problems so i would like to write my own to help out others who are encountering my same issues.
----------------------------------------------------------------------------------------
This guide is for Windows and explains everything you need to update your Nexus 7 (2013) Wifi (flo) from 4.3 JSS15R to 4.4 KRT16O
----------------------------------------------------------------------------------------
1) disconnect table from USB cables if it is connected to the pc
2) go http://developer.android.com/sdk/index.html and download the SDK
3) unzip the SDK in C\
4) go in C:\adt-bundle-windows and start the SDK Manager
let is load and scan for all possible updates.. when it has finished click on Deselect All then choose only these to packages:
Tools --> Android SDK Platform Tools
Extra --> Google USB Driver
if the Android SDK Platform tools are updated then you will only have 1 package to download else you will see Install 2 Packages, click it, then select Accept Licence and click Install.. wait it to finish and then close
5) let's now download the factory image
Nexus 7 2013 only WIFI (flo) "razor" is here: https://developers.google.com/android/nexus/images#razorkrt16o and download the first link of the page (4.4 (KRT16O) Link)
Nexus 7 2013 MOBILE/LTE (deb) "razorg" is here: https://developers.google.com/android/nexus/images#razorgkrt16o and download the first link of the page (4.4 (KRT16O) Link)
for some reason the MD5 checksum and SHA1 for the flo version dont match but i read people have been able to install this image anyway (i installed the OTA so i did'nt try this install)
unzip the downloaded file and you should get a .tar file.. unzip it again and you should get a bunch of files.. i got the following ones:
1)bootloader-flo-flo-03.14.img
2)flash-all.bat
3)flash-all.sh
4)flash-base.sh
5)image-razor-krt16o.zip
place all these files in C:\adt-bundle-windows\sdk\platform-tools\
6) now let's install the drivers correctly and flash the update
First thing, keep the Nexus 7 not connected to the USB cable. Then switch it on and go into Settings --> Storage click on the Options and choose USB computer connection and make sure to have the CAMERA (PTP) selected.
Now go into developer options and select Stay Awake and USB Debugging
Go back to the home screen and connect the tablet to the PC.. let the PC try to install it by himself.
Now press WINDOWS+R and run devmgmt.msc
If you see a device called Nexus 7 with a yellow sign then right click on it and choose Update software driver.
Then select the second option (find a driver on the computer), then select the second option (choose manually a driver from a list), now click first option (show all the devices), then click Driver disk button, then browse to C:\adt-bundle-windows\sdk\extras\google\usb_driver\ and choose android_winusb.inf and do ok.
The box should fill with a device called Android Composite ADB Interface, choose that and do next
To check if you have done right do:
WINDOWS+R and run cmd
in cmd do cd.. until you get into C:\
then do cd adt-(tab) to autocompile and enter
then do cd sdk enter
cd platform-tools enter
adb.exe devices enter
the daemon should start and you should get a list of devices attached showing you a code made of numbers and letters.. this is your nexus 7.
if cmd says the device is unauthorized then look at your tablet and allow the computer to operate
let's now install the driver also in fastboot so to do this always in cmd type
adb.exe reboot-bootloader
the tablet will reboot into the bootloader and you will see an android with the open tummy
now inside the command prompt window run the following commands:
fastboot flash bootloader bootloader-flo-flo-03.14.img
fastboot reboot-bootloader
fastboot -w update image-razor-krt16o.zip
if everything has gone right you should have updated using the factory image and the tablet should reboot by now...
else continue reading:
if you had any issues we can then try to update through OTA which means you will need to download another package
the nexus 7 ONLY WIFI OTA: http://android.clients.google.com/p....signed-razor-KRT16O-from-JSS15R.3a3951e8.zip
not sure if the nexus 7 LTE OTA url has been released or not because i can't find it.. if anyone has the link and can point it out to me i would be glad to add it here
download it and place it always in
C:\adt-bundle-windows\sdk\platform-tools\
rename it to something easier and redo
adb.exe sideload ota_zipfilename (enter)
everything should go fine now, so it will reboot.. configure the tablet again if it is the case
7) changing recovery
download latest recovery from here http://techerrata.com/browse/twrp2/flo
place the download img into C:\adt-bundle-windows\sdk\platform-tools\
then reboot to bootloader using adb or simply switch the table on keep vol down down
in cmd type
fastboot.exe flash recovery recoveryimagefile
8) rooting the tablet
btw sideloading the zip for rooting requires a custom recovery such as TWRP so step 7 must be achieved in order to root this way
download the latest superSU from here http://download.chainfire.eu/supersu
go into recovery mode passing by the bootloader
do another adb sideload passing this time the zip for supersu
everything done hopefully
hope this helps others which had issues with drivers and had issues with the original factory image 4.4 (KRT16O) giving the E: signature verification failed
Great guide!
The package for the link https://developers.google.com/android/nexus/images#razorkrt16o fails verification for me as well and does not install once its side loaded. So it's probably beneficial to just point to the other link.:good:
haet said:
Great guide!
The package for the link https://developers.google.com/android/nexus/images#razorkrt16o fails verification for me as well and does not install once its side loaded. So it's probably beneficial to just point to the other link.:good:
Click to expand...
Click to collapse
The factory image isn't meant to be side loaded. It needs to be installed using fastboot/bootloader.
If I understand this correctly, it fails because ADB sideload is intended for zips and not image files.
If you use the flash_all.bat (or whatever it is, slips my mind at the moment) it will flash a complete factory image.
The zip on the other hand is intended for sideloading and should update the OS no problem.
cincibluer6 said:
If I understand this correctly, it fails because ADB sideload is intended for zips and not image files.
If you use the flash_all.bat (or whatever it is, slips my mind at the moment) it will flash a complete factory image.
The zip on the other hand is intended for sideloading and should update the OS no problem.
Click to expand...
Click to collapse
Gotcha.
There is quite a size difference between the the zip and the tgz format. Is this only because of compression format? Or is it more beneficial to flash one over the other?
cincibluer6 said:
If I understand this correctly, it fails because ADB sideload is intended for zips and not image files.
If you use the flash_all.bat (or whatever it is, slips my mind at the moment) it will flash a complete factory image.
The zip on the other hand is intended for sideloading and should update the OS no problem.
Click to expand...
Click to collapse
There are zips and then there are ZIPS
It isn't the type of archive that is critical but the contents of the zip. Zip is just a generic archive format and can store anything.
The OTA zips include specific content. In particular they are
signed by google
include an install script to handle patching, replacing files, and setting up permissions
include an install utility to run the script
include individual patch files
include whole files if the patches would be too large
have a specific directory structure where everything is supposed to be located
The factory images are also delivered in an archive. They are first archived in a tar format, which just collects a bunch of files and doesn't compress. Then they are gzip'd which is a Gnu archiver which performs a similar job to zip, but uses a different format and algorithm. Within the original tar archive there is also a zip archive. That zip contains images of the kernel, recovery, rom, user and data partitions, but it doesn't include the aforementioned items that make a zip into an OTA-style zip.
The factory images are NOT meant to be flashed in recovery. Recovery will be expecting the stuff above that OTA-style zips have. If you try to flash the factory image, the first point of failure is the signature verification fails, because it isn't signed (and even if it were signed, it wouldn't be signed in the way recovery is expecting)
So what is the difference between flashing via Recovery and the OTA-style zip vs running flash-all and the factory image?
The OTA-style flash will go and examine each file it needs to patch to make sure it is stock JSS15R. It must do this because it doesn't have the complete KRT16O file, only a patch (difference between the JSS15R and KRT16O versions of the file) that only makes sense if applied to the original JSS15R file. Even if there is a one space difference in the file, the patch would fail.
Since the OTA-style patches files (in general) it will leave files you have added in place. In particular the files installed to keep root are left in place and so are apps, sounds, images, etc. you added to the ROM (/system) partition. So you ask why do you lose root? You don't lose the root files that were installed, they are neutered because at the end of the OTA-style install, it resets the permissions in all the directories to what they are supposed to be. This drops the special permissions you gave the root files to do their job. Also the OTA-style patch does not directly overwrite your recovery. Upon first boot, there is a script that runs which builds the new recovery using the installed kernel. This is why if you immediately (prior to reboot) run the SuperSU install script after the installation of the OTA-style update.zip, you can restore root and keep your recovery. The SuperSU install script replaces the script that builds the new recovery, with its own file. It also reinstalls and sets the permissions on the root files. So in effect, you have root and have prevented stock recovery from being installed over your custom recovery.
The Recovery that you use to run the OTA-style update.zip is just special program that boots up on the linux kernel and accepts certain actions. The source code for Recovery along with the kernel is published. People can easily replace Recovery with their own custom program and that is why you have custom recoveries.
The factory images on the other hand install through the bootloader. This is a low-level program similar to BIOS on PCs. It has more limited functions and the code is proprietary. It is harder to do custom bootloaders because the source code isn't published.
The bootloader has a more limited set of functionality and you communicate with bootloader using a different program called fastboot.
The bootloader expects the files you give it to be .img files or you can give it a zip archive full of .img files. These are not patches of files like the OTA. These are complete images to replace the existing partitions. It is like a Norton Ghost image (factory image style) of your entire hard drive vs an incremental backup (OTA-style) of just the files that changed.
Given they are full images, they will overwrite the partitions completely so anything you had on them before is wiped out and overwritten.
Also full images are always larger than OTA patch-style updates because they contain everything rather than just the changed file patches.
By default they use the -w option in the fastboot install instructions, which will wipe your user data as well, but you can remove the -w option and keep your user data, though there are always a small percentage of upgrades where it won't work to keep your user data (same with the OTA).
Anyway that is just a brief summary. There are many more details and nuances I didn't list.
^^ I won't go ahead and quote you but thanks for the full on summary. I knew what .tgz was and all that (using Linux for a few years now) but I'm new to most of the Android like stuff.
Thanks for clarifying and explaining it so well.
Just gave the sideload of SuperSU a shot and was given two errors:
failed to verify whole-file signature
signature verification failed
haet said:
Just gave the sideload of SuperSU a shot and was given two errors:
failed to verify whole-file signature
signature verification failed
Click to expand...
Click to collapse
You cannot sideload the SuperSU update.zip using stock recovery because it isn't signed by Asus/Google.
It is signed, but using a generic cert.
You need to use custom recovery like TWRP or CWM to install it. You can use their menu system to choose the file or if they have sideload, you can sideload using custom recovery.
sfhub said:
You cannot sideload the SuperSU update.zip using stock recovery because it isn't signed by Asus/Google.
It is signed, but using a generic cert.
You need to use custom recovery like TWRP or CWM to install it. You can use their menu system to choose the file or if they have sideload, you can sideload using custom recovery.
Click to expand...
Click to collapse
Makes sense. Thanks for the help!
Windows 2008 server usb drivers?
This guide was great, and everything worked fine until I reboot into recovery and choose to adb sideload an image. Then, the device doesn't get recognized, and the google drivers don't work. So, I can't see the device with the ADB interface driver.
Does any have experience with this? Am I out of luck? I couldn't find anyone talking about drivers for windows server 2008 anywhere -- but usually win7 drivers work fine -- just not here.
I don't have another windows installation anywhere, so if there isn't an answer, I will just have to wait for OTA
** UPDATE **
I found some universal drivers from Koushik Dutta: https://plus.google.com/103583939320326217147/posts/BQ5iYJEaaEH
Those drivers worked! Then I used the OTA download (your second option), sideloaded it, and got the update. Now running KitKat, so thanks a bunch! hopefully someone else will find this driver option useful.
I'll give those universal drivers a go. Hell, I've tried everything else on the Internet with complete failure. One last try before I give up.
Sent from my SM-P600 using XDA Premium HD app
jbwray said:
This guide was great, and everything worked fine until I reboot into recovery and choose to adb sideload an image. Then, the device doesn't get recognized, and the google drivers don't work. So, I can't see the device with the ADB interface driver.
Does any have experience with this? Am I out of luck? I couldn't find anyone talking about drivers for windows server 2008 anywhere -- but usually win7 drivers work fine -- just not here.
I don't have another windows installation anywhere, so if there isn't an answer, I will just have to wait for OTA
** UPDATE **
I found some universal drivers from Koushik Dutta: https://plus.google.com/103583939320326217147/posts/BQ5iYJEaaEH
Those drivers worked! Then I used the OTA download (your second option), sideloaded it, and got the update. Now running KitKat, so thanks a bunch! hopefully someone else will find this driver option useful.
Click to expand...
Click to collapse
You sir are a genius (and the driver author). I had the exact problem and looked everywhere. I am low tech, too. So following these two guides;
http://phandroid.com/2013/11/13/how-to-install-kitkat-nexus-7/
http://www.droid-life.com/2013/02/1...date-a-nexus-without-root-or-custom-recovery/
I am now on 4.4. And everything is intact. Thank you!
I also ran into Google USB driver problems after the Nexus dropped into recovery mode. So I gave up trying to use Windows 8 and switched over to using Ubuntu workstation. Getting ADB to run on Ubuntu is very easy and so flashing the Kit Kat OTA file was a breeze.
On Ubuntu there's no need to install the full SDK just to get ADB and Fastboot; the process is outlined here: http://forum.xda-developers.com/showthread.php?t=1860108. From there it's just simple command line entries from a terminal i.e. "adb devices."
I was disappointed to see Google has kept the black top and bottom bars for tablets. I usually run Teslacoil's launcher and installed their beta launcher with transparent bars a welcome relief.
doorunrun said:
I also ran into Google USB driver problems after the Nexus dropped into recovery mode. So I gave up trying to use Windows 8 and switched over to using Ubuntu workstation. Getting ADB to run on Ubuntu is very easy and so flashing the Kit Kat OTA file was a breeze.
On Ubuntu there's no need to install the full SDK just to get ADB and Fastboot; the process is outlined here: http://forum.xda-developers.com/showthread.php?t=1860108. From there it's just simple command line entries from a terminal i.e. "adb devices."
I was disappointed to see Google has kept the black top and bottom bars for tablets. I usually run Teslacoil's launcher and installed their beta launcher with transparent bars a welcome relief.
Click to expand...
Click to collapse
If you install the latest Google search apk and GEL from the nexus 5, you will have transparent nav bar.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 7 using Tapatalk 4
Hi. This will wipe the device right? We should have a backup before proceeding?
ganstar said:
You sir are a genius (and the driver author). I had the exact problem and looked everywhere. I am low tech, too. So following these two guides;
http://phandroid.com/2013/11/13/how-to-install-kitkat-nexus-7/
http://www.droid-life.com/2013/02/1...date-a-nexus-without-root-or-custom-recovery/
I am now on 4.4. And everything is intact. Thank you!
Click to expand...
Click to collapse
You should also know that Google has drivers as well located at http://developer.android.com/sdk/win-usb.html, which is what you would have downloaded right after you installed the SDK package.
For those who can't get their devices recognised even after doing everything correctly. Just boot the tablet and change from MTP to PTP. Worked for me.
Sent from my Nexus 7 (2013)
I was on PTP. still didn't work
BreakShadow said:
For those who can't get their devices recognised even after doing everything correctly. Just boot the tablet and change from MTP to PTP. Worked for me.
Sent from my Nexus 7 (2013)
Click to expand...
Click to collapse
I was on PTP. Still didn't work until I found those drivers. The drivers from Google were what I was using, but they didn't support the device in fastboot mode for the version of windows I was using. (2008 server R2)
haet said:
You should also know that Google has drivers as well located at http://developer.android.com/sdk/win-usb.html, which is what you would have downloaded right after you installed the SDK package.
Click to expand...
Click to collapse
I had those, they didn't work for me, as others have noted as well.
Related
OUTDATED[Guide] Setting up/using adb/fastboot-unlock, flash custom recovery & root
Below is a great guide to rooting, from several sources, (mostly taken from pingvinen's "An Idiot's Guide to Flashing the Xoom" and a guide by publicanimal. and I hope it helps. You can find the links to all of the files referenced below in the Xoom Heaven thread (thanks StrifeSoldierVII!)[/I]
(New thread in General Section by Jack207407 will have all the updated links for flashing
http://forum.xda-developers.com/showthread.php?t=1443110
One Stop For ROM's, MOD's, and Root Wifi-Only and 3G/4G Models)
"What you need to do can be encompassed in these following short steps (will be detailed later on) in the following order. Each step is required before you can proceed to the next one. However, make sure that you are very very careful and don't try to take any shortcuts. That may soft-brick your device, and you may have a difficult time to explain that to your wife ... You have been warned.
HERE'S THE USUAL DISCLAIMER--I AM NOT RESPONSIBLE FOR ANY HARM THAT MAY COME TO YOUR DEVICE IF YOU FOLLOW ANY PART OF THIS GUIDE--ANY RISK IS ON THE USER!
I strongly recommend you to read the entire guide before trying. In fact, read it twice to ensure that you have understood everything. If there is weird stuff that you don't understand, don't hesitate to ask. The reason for me writing this down is that I like to document what I have learned. This is to me an excellent way to ensure that I will remember what I just did. Another reason was that I could not find a single thread that encompassed all steps required. There are many different threads, but no one (that I could find) that really guides you from start to goal. So enjoy and good luck!
I would like to thank LandMaster and cam30era for helping out with advice during my initial trail-and-error session. I soft-bricked my device once and had big problems to get by point 4.3 (avoid overwriting of CWM), but with their encouragement I finally succeeded.
Just a note before we begin: the different Xoom. Models that are able to use this guide are the following:
MZ600 - stingray_cdma - Motorola US 3g Xoom (technically this device is stingray as well, but I will be using stingray_cdma as the two devices have incompatible software)
MZ601 - utms_everest - Motorola EU 3g Xoom
MZ602 - stingray - Motorola US 4g Xoom
MZ604 - wingray - Motorola Wifi Xoom
(thanks solarnz!)
___________
Overview of the 6 required steps
1. Install Motorola USB drivers for your computers (for USB connectivity) 2. Install Java SDK and Android SDK tools (for adb and fastboot commands) 3. Unlock the device for flashing (allowing replacement of recovery and boot images) 4. Install a modified recovery image (ClockWorkMod recovery for Android) 5. Root the device (Allow r/w access to the device filesystem) 6. Flash a kernel that supports overclocking etc.
Steps 1, 2, 4, 5 and 6 require that you download install, image and zip files needed for the flashing.
All this was performed on a Windows PC. Windows 7, Mac and Linux users will probably have to do some steps differently.
1.0 Install the latest Motorola USB drivers
The installation file can be found at: http://developer.motorola.com/docstools/USB_Drivers/
1.1 Install the drivers and ensure that your Xoom is recognized by the computer
2.0 Installation of development software
Android SDK and Java SDK need to be installed. You can find the installation kits here.
http://developer.android.com/sdk/index.html In case you can't find fastboot.exe, look for it here (thanks to jerrycycle): http://forum.xda-developers.com/showpost.php?p=19546334&postcount=5
Update: you could also just install the adb fastboot pack here:http://www.android.net/forum/downloads.php?do=file&id=67
http://www.oracle.com/technetwork/java/javase/downloads/index.html
2.1 Install them as any other software, making an Android SDK folder on C/.
2.2 Make sure that all the files you need are in the Platform Tools folder (fastboot, recovery image file and so on). Copy any files in the Tools folder to the Platform Tools folder if necessary. Note: If the Android SDK complains that the Java Dev Kit can't be found, just press Back and then Next again. Wierd, but that seems to do the trick ... go figure.
(Warning: Never put any zip files in your Platform Tools folder. Flashing zip files through fastboot will cause very serious problems. Zip files must be flashed from the external micro SD card through CWM recovery on the Xoom...we'll get to that later.)
2.3 Test that ADB and FASTBOOT works. You should open a command window by right clicking in your Platform Tools folder where all of your files are, plug in your Xoom to your computer with your Motorola cable (it may not work with a generic cable) and write 'adb devices'. Your Xoom should now be listed. Did your device not show up? Make sure that you have USB debugging enabled in Settings/Applications/Development on your Xoom.
Optional: Those that want to be able to access adb from any where on their computer, here's a tip from scsa20: "For windows, if you go into System Properties and choose Advanced, then Environment Variables..., you'll be able to edit the Path variable under System variables, just add the path to where adb and fastboot is located (separated with a semi-colon ().
Here's what my Path variable looks like:
C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;%SystemRoot%\system32;%Sy stemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\ System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Live\Shared;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\android-sdk-windows\tools;C:\android-sdk-windows\platform-tools;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\
It's long but do you see the android stuff there at the end?"
Update: xda poster Mandelbrot Benoit suggests an alternate adb setup, here: http://forum.xda-developers.com/showpost.php?p=18072572&postcount=50
If your windows computer doesn't see your Xoom, consider this (Originally Posted by AngryBulleteyeTruth):
When the xoom does not show up on PC it may be the problem of.... windows media player!
Xoom uses drivers of WMP to communicate with PC. If someone does not have the newest WMP drivers it will not show up and you can see xoom device in the devices tab on PC having an exclamation mark.
So the solution is to download and install Windows Media Player 11. It has worked for me.
--------
OK. Now that you are set up, it's Showtime! Take a deep breath...
3. Unlocking the device for flashing
This step will effectively erase the internal storage, including all your apps and settings. Use whatever backup you want to secure important data before you start. (It will also void your warranty, so you still have time to go back.)
3.1 Power up and start the Xoom.
3.2 Ensure that your device is fully recognized by the computer. A good sign is that the 'Portable device' dialog is activated on Windows when your Xoom has booted. The Xoom should also be seen in 'Computer'. If not, go back to step 2 and double check your USB drivers.
3.3 Use the command 'adb reboot bootloader' to go into Flash mode.
3.4 Use the command 'fastboot oem unlock'. This will trigger a dialog on your Xoom. Follow the instructions on the screen to complete the unlocking. I repeat, this *will* do a factory reset and all data will be lost!
3.5 Once unlocked, the Xoom will restart and work as normal. Don't bother to do any setup at this time, just make sure that USB debbuging is checked in settings, and now go on to step 4
4. Install recovery image (CWM) UPDATED 4/19/12
If you haven't done it already, download the recovery image file and save it to your computer in the Platform Tools folder.
(Download the recovery image from this link: http://forum.xda-developers.com/showthread.php?t=1604014 only the img file flashed through fastboot Remember, never try to flash a zip file through fastboot!)
Important: At this time, make sure you have a good (known to be working) microsd card in your sdcard slot in your Xoom. Reboot the Xoom with the sdcard in the slot to make sure it's mounted.
4.1 Boot into flash mode with 'adb reboot bootloader.'
4.2 Install your downloaded recovery image: 'fastboot flash recovery eos-recovery-r6.img' or whatever is the exact name of the recovery img file you are flashing.
4.3 Enter CWM recovery with the procedure below.
4.4 Restart the device with 'fastboot reboot'. Timing is essential here, so be alert when the device restarts, or you will have to redo section 4.
4.5 Once the Motorola logotype is shown, start counting to 3. At 3, press the Volume Down button. This should result in the text 'Android Recovery' in the top left corner. If it does not work (if you see Starting Fastboot Protocol), experiment with the timing (see below).
4.6 When 'Android Recovery' is shown press the Volume Up button. This should invoke the CWM recovery menu. If that works, then congratulations for getting this far!
Here is a potential pitfall. If you are unable to enter CWM *before* the device boots into Honeycomb, then the newly installed recovery image will be overwritten by the system default recovery. Just repeat steps 4.1 through 4.6 if that happens.
UPDATE(12/28/11) Since putting this guide together, Motorola has issued a number of Over-the-Air (OTA) updates that have complicated the process of flashing the Clockawork Mod recovery, so if you have accepted any OTA updates, please read the following, which describes each step (http://forum.xda-developers.com/showthread.php?p=26009191#post26008083) (Thanks to Landorin.)
(If you have root and want to remove these files, remove or rename /system/etc/install-recovery.sh with something like root explorer. You can then flash your custom recovery through fastboot again.)
For those of you that get stuck with some error like 'device not recognized' poster Madjinj gives the following advice:
1) Be sure that you have your adb folder in the root of C drive directly and be sure that you are in adb folder in command prompt program (CMD in Windows machines) i.e by typing "cd c:\XXX" where XXX is the name of adb folder in your machine.
2) Be sure that you type "adb reboot bootloader" in comand prompt to activate adb program. if the problem persists, try typing "fastboot reboot" then after reboot type "adb reboot bootloader" in command prompt program.
3) Use the USB cable that came with your Xoom (some cables are not good in flashing for unknown reason..!!
4) make sure that you activate USB debugging mode.
5.0. Rooting the Xoom
The Universal Xoom Root zip file from solarnz is located here: http://forum.xda-developers.com/showthread.php?t=1242241
5.1 You need to transfer the Universal Xoom Root zip file to a working external micro SD card. You can do this on a computer or cell phone, but the Universal Xoom Root zip file must be located in the root directory of the micro SD card.
5.2 Insert the now prepared SD card in the Xoom.
5.3 Boot into recovery (as described in 4.3). Navigate using the volume buttons and press the power button to select the active option.
5.4 Select 'Install ZIP from sd card.'
5.5 Select 'Choose ZIP.'
5.6 Navigate to the ROOT zip file with the Volume buttons and select it with the Power button. Confirm that you want to install it.
5.7 Everything should indicate success, so back out to the main CWM menu and reboot the device.
5.8 From Android Market, install any app requiring root and start it. If the rooting was successful, then the app should request superuser permission and you should be able to grant it without any problems.
6. Flashing a new rom or kernel...(e.g. Tiamat Moray Rom and/or Odachi Kernel). Look in the Xoom Heaven thread or in the Development section of this form for all of these files.
6.1 This step is identical to 5, but swap out the ROOT zip for the ROM or KERNEL zip. For simplicity, you may want to prepare the micro SD card with both zip files at the same time in step 5.1..."
------------------------
This is still one of the best explanations of how to use adb and fastboot to unlock and root the Xoom and install a custom recovery, etc, and doesn't deserve to buries on back pages of this forum. Hopefully, the step-by-step nature of this guide will help those of you that have limited experience with this kind of tinkering.
Oh, and please feel free to correct any errors or omissions. As I said, it came from several sources and needed to somewhat updated.
Thank you, just bought my xoom yesterday and was confused on the steps to take!
This has made it as clear as possible for me and will follow your instructions to the letter tonight.
Sent from my MZ604 using xda premium
fastyan said:
Thank you, just bought my xoom yesterday and was confused on the steps to take!
This has made it as clear as possible for me and will follow your instructions to the letter tonight.
Sent from my MZ604 using xda premium
Click to expand...
Click to collapse
Good luck! Let us know how you make out and if anything needs to be clarified.
think im doing something wrong as unlocked fine but when i go to install the recovery file it keeps coming up cannot load? any ideas where im going wrong?
been at it 3 hours now lol and losing the will to live im sure its gona be something simples
fastyan said:
think im doing something wrong as unlocked fine but when i go to install the recovery file it keeps coming up cannot load? any ideas where im going wrong?
been at it 3 hours now lol and losing the will to live im sure its gona be something simples
Click to expand...
Click to collapse
Check to make sure that your file download is good, and that you are typing it's name correctly. Better yet, you could rename the file "recovery.img" and that will make it very easy to get it right.
On the sd card?I thought we had to put it into sdk platform tools? I have put it and renamed it onto my sd card but what is the command to flash recovery from sd card?
Also noticed once I have done "adb reboot bootloader" my computer doesn't see the XOOM properly, is in can't see it in my computer but does make a noise when I connect and disconnect is this correct? Debugging is on.
Sent from my MZ604 using xda premium
fastyan said:
On the sd card?I thought we had to put it into sdk platform tools? I have put it and renamed it onto my sd card but what is the command to flash recovery from sd card?
Also noticed once I have done "adb reboot bootloader" my computer doesn't see the XOOM properly, is in can't see it in my computer but does make a noise when I connect and disconnect is this correct? Debugging is on.
Sent from my MZ604 using xda premium
Click to expand...
Click to collapse
When you're in the bootloader, you won't be able to access the SD Card or anything of that sort and adb won't work, in stead, when you're in the bootloader, you're switching over to fastboot. I'm sure if you type in fastboot devices you'll see your xoom listed.
Thank you for the reply and that's one thing sorted but any idea why its telling me "cannot load recovery"? I have tried renaming it and downloaded the recovery file 4 times incase that was wrong but still no joy :-(
I have done this all before on my phone and never had a problem so I must be missing something but f$*@ed if I know what?
Thanks again for your help though.
Sent from my Desire HD using xda premium
Just had a thought. Could it be that the XOOM hasn't actually unlocked, would that cause it to not load? Is there any way to check if its unlocked successfully? Although I did try it twice before?
Sent from my MZ604 using xda premium
Once you got it in the bootloader, you gotta make sure you do fastboot oem unlock, press volume down then up, press volume down again then up again, and let it format and reboot.
If it's already unlocked, you'd get a message telling you so (generally).
Then when you go to flash the recovery, make sure that the recovery image is in the folder where fastboot is and type in fastboot flash recovery recovery.img (if I remember the syntax that is, I'm at work and don't feel like scrolling up or going into the root guide to confirm xD ).
fastyan said:
On the sd card?I thought we had to put it into sdk platform tools? I have put it and renamed it onto my sd card but what is the command to flash recovery from sd card?
Also noticed once I have done "adb reboot bootloader" my computer doesn't see the XOOM properly, is in can't see it in my computer but does make a noise when I connect and disconnect is this correct? Debugging is on.
Sent from my MZ604 using xda premium[/QUOTE
No, sorry, I was trying to respond. when I was tired and distracted.I totally miswrote. Of course the cwm recovery img goes in the platform tools...thank goodness you guys are out there to catch mistakes!
So, I don't know if you had any progress, but not successfully unlocking would surely stop you in your tracks.
Click to expand...
Click to collapse
okantomi said:
No, sorry, I was trying to respond. when I was tired and distracted.I totally miswrote.Oof course the cwm recovery img.. goes in the platform tools...thank goodness you guys are out there to catch mistakes!
So, I don't know if you had any progress, but not successfully unlocking would surely stop you in your tracks.
Click to expand...
Click to collapse
With the way I have my system setup, I can run adb and fastboot wherever I am
No, sorry, I was trying to respond. when I was tired and distracted.I totally miswrote. Of course the cwm recovery img goes in the platform tools...thank goodness you guys are out there to catch mistakes!
So, I don't know if you had any progress, but not successfully unlocking would surely stop you in your tracks.
No progress yet as im at work but when I get home I will start the process from scratch again and see how I get on and will keep you posted.
scsa20 said:
With the way I have my system setup, I can run adb and fastboot wherever I am
Click to expand...
Click to collapse
Care to share???
That would be helpful to many, I'm sure. We could add it to the guide, along with anything else you can think of.
fastyan said:
No, sorry, I was trying to respond. when I was tired and distracted.I totally miswrote. Of course the cwm recovery img goes in the platform tools...thank goodness you guys are out there to catch mistakes!
So, I don't know if you had any progress, but not successfully unlocking would surely stop you in your tracks.
No progress yet as im at work but when I get home I will start the process from scratch again and see how I get on and will keep you posted.
Click to expand...
Click to collapse
If, as you follow this guide, you find any explanations that are not clear or if you think of a step to take or something else that might improve the guide, please post it and we can add it in. It's been almost 6 months since I've unlocked and at least a couple of months since I've had to use adb, so I'm sure I've forgotten some things. Those of you whose experience is fresh can give really good advice. That's how this guide was originally written, by pingvinen, right after he had gone through a grueling rooting process.
okantomi said:
Care to share???
That would be helpful to many, I'm sure. We could add it to the guide, along with anything else you can think of.
Click to expand...
Click to collapse
For windows, if you go into System Properties and choose Advanced, then Environment Variables..., you'll be able to edit the Path variable under System variables, just add the path to where adb and fastboot is located (separated with a semi-colon (;)).
Here's what my Path variable looks like:
C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Live\Shared;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\android-sdk-windows\tools;C:\android-sdk-windows\platform-tools;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\
Click to expand...
Click to collapse
It's long but hey, see where the android stuff is near the end?
@Okantomi:
We all have learned some things from trial & error (eg.the sk cannot detect java dev kit)
i could only flash recovery after renaming it to recovery(do not forget to add.img in cmd while flashing).also the official motorola name recovery as same.
after downloading sdk and updating to platform tools i have kept a zip in safe location so that i do not need to download again platform tools if i install sdk fresh
initially knowledge was scattered now it is at one place.
right now testing steady hawkin's kernel and new recovery
btw good signature pic.
Ok so another night has gone and still can't get recovery on!! Tried re unlocking the XOOM and every time it comes up with "cannot load recovery.img" I tried installing everything on my laptop and went right from the start and getting exactly the same thing!
Starting to think im never gonna get this sorted now :-( just feels like the XOOM isn't unlocking? Every time I go through the unlocking process it never states that its already unlocked? Is there any way I can check that it is unlocked?
Please help im losing the will to live now lol
Sent from my MZ604 using xda premium
I would say to send it to me and I can take a wack at it but I don't think you want to wait that long to simply root it.
Let me ask you, are you getting any sort of error messages when you do fastboot flash recovery recovery.img? If so, what's that error message?
scsa20 said:
I would say to send it to me and I can take a wack at it but I don't think you want to wait that long to simply root it.
Let me ask you, are you getting any sort of error messages when you do fastboot flash recovery recovery.img? If so, what's that error message?
Click to expand...
Click to collapse
Not getting any error message it just says "cannot load recovery.img"
I have tried with and without the .img and always the same?
Tried going through the whole process again on my laptop incase I had missed something but exactly the same.
When I unlock it I follow the onscreen instructions and at the end it says its complete before it reboots. Then I turn on usb debugging again and reboot bootloader all ok but won't let me load the new recovery?
Normally I would just say it wasn't meant to be and leave as it is but I wont be beaten on this so I'm purposely not installing anything on it till its done. Any ideas apart from bringing it round yours lol ;-)
Sent from my Desire HD using xda premium
This process is very similar to how its done on Windows but I thought I would go ahead and post it here for those who have never rooted or used terminal before. I know the first time I rooted an Android device I was very happy to have a Mac specific guide to follow . Many of you may think this is simplified too much but, like I said, I created this with first time rooters in mind. If a Mod would like to sticky it thats fine. Also, I've tried to be very careful and thorough with the instructions, but if anyone notices a problem please let me know.
As always, I am not responsible if something goes wrong and your device gets bricked. I will try to be as specific as possible and this process worked for me. Also, I don't claim to have the knowledge to fix any problems you may encounter along the way. There are a lot of very talented people here who have extensive knowledge of Android, but I am not one of them. I can unlock my bootloader and root my device but that's about it. So if you do encounter a problem I will try to help but there is no guarantee I can fix the issue (in fact the odds are that I can't fix the issue). Proceed with caution!
Important: Unlocking your bootloader will wipe your device! Please backup anything that is important (pics, vids, documents, etc)!
This guide only applies to the 2013 Nexus 7
A. Prep
1. Charge the Nexus 7 to at least 80% so it doesn't turn off during the process
2. Unlock developer options by navigating to -- settings > about tablet -- and then click the build number 7 times
3. Enable USB Debugging by navigating to -- settings > developer options -- and select the USB Debugging box
4. Download the Android SDK for Mac here and unzip it once it has downloaded. DO NOT use the link posted below for the sdk. It does not contain fastboot and you will not be able to complete the rooting process. Please use the full sdk from Google that I have linked here. EDIT: Google has changed the download for the SDK. Please see posts 73-75 on page 8 for instructions regarding how to get everything you will need for the SDK.
5. Download the latest TWRP for your device here and place it in the platform-tools folder of the SDK. Make sure the TWRP file you download is for the 2013 Nexus 7...not the 2012 version. To find the platform-tools folder -- open the adt-bundle-mac folder you downloaded and unzipped > sdk > platform-tools -- place the TWRP file here. Other files in the platform-tools folder should include adb, api, fastboot, notice.txt, and a few others.
B. Unlock the Bootloader - Warning--This will wipe your device! Backup anything important!
1. With your device powered on, plug it into your Mac
2. Open up terminal and navigate to the platform-tools folder which has the adb, fastboot, and TWRP files. An easy way to do this is to type "cd" (without the quotes) into terminal, add a single space, and then drag and drop the platform-tools folder onto terminal and then press enter.
3. Type this command into terminal: ./adb reboot bootloader
4. If you correctly navigated to the platform-tools folder, you should get an error message saying the device is unauthorized. Go to the Nexus 7 and there should be a dialogue box asking you to authorize the computer. Authorize the computer.
5. Re-type the command: ./adb reboot bootloader
6. Your device should now boot into fastboot mode. On your N7, the word "start" will be at the top in green and you can also see a lot of your device information on this screen
7. Type into terminal: ./fastboot oem unlock
8. Your Nexus 7 will now display a message about unlocking your device. Use the volume button to select the option to unlock the device and then press the power button to confirm the choice.
9. Your device will return to the fastboot mode screen and you can now see in the device information section near the bottom that the device is unlocked. While on this screen, press the power button to select the green "start", which will reboot your device. You must restart your device here or you will run into a softbrick issue during the root process!
10. Congrats! Your device is now unlocked. If you want to root proceed to the next section.
C. Rooting
1. Once your device has rebooted from the unlocking process, everything will have been wiped and reset. You will have to go back and unlock developer options again and you will also have to enable USB debugging again, which can be found part A. Prep of this guide.
2. Download the current version of SuperSU to your Nexus 7. It will go to the download folder on your N7. It can be found here. (Note: The version of SuperSU I have linked to is 1.93, but it gets updated from time to time. You might want to look around and see if a more current version is available. The thread for SuperSU can be found here.)
3. Turn your N7 off and then boot into fastboot mode by pressing the Volume Down button while also pressing the Power Button to turn the device on. If done correctly you should see the green "start" again at the top and the device information near the bottom.
4. Plug the N7 into the computer and make sure terminal is still directed to your platform-tools folder. For instructions on how to navigate to the platform-tools folder see part B. Unlock the bootloader.
5. Type the following into terminal: ./fastboot flash recovery nameofTWRPrecovery.img
5a. For the nameofTWRPrecovery.img part above, you must type the exact file name of whatever TWRP (or other) recovery you've decided to use. This is the same file that you downloaded and placed in the platform-tools folder in Part A. Step 5. above. For me the file name I had to type was openrecovery-twrp-2.6.0.0-flo.img and the total command looked like this: ./fastboot flash recovery openrecovery-twrp-2.6.0.0-flo.img
6. In terminal you should see the process taking place and it will tell you when its finished and how long it took (less than a second).
7. Now, while still in fastboot mode, use the volume button to navigate to Recovery and press the power button.
8. The N7 will boot into TWRP which we just installed.
9. Using the touch screen, select install and then navigate to the download folder where you saved the SuperSU file
10. Select the SuperSU file using the touchscreen and then swipe to flash it. You will see the rooting process occur on the screen.
11. Congrats! You are now rooted. Select Reboot System and you are done!
Your instructions couldn't be any simpler. I am unlocked and rooted now. This is my first Android device. Thank you very much.
Glad it was helpful for you!
Is there any step involved to install drivers here which I saw mentioned while using Windows system?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Very nice guide! Well done
Sent from my Nexus 7 2013 using xda app-developers App
redhat_123 said:
Is there any step involved to install drivers here which I saw mentioned while using Windows system?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
No, you don't need any drivers for the Mac (which makes it simpler than the Windows process in my opinion). I've included links in the how-to for everything you will need .
geckocavemen said:
No, you don't need any drivers for the Mac (which makes it simpler than the Windows process in my opinion). I've included links in the how-to for everything you will need .
Click to expand...
Click to collapse
Thanks a lot. This is the first time I used MAC to unlock and root a device and it was very quick. Appreciate your effort in putting up the detailed steps.
I just saw this post so I figured I may as well chime in. I've been rooting devices and using adb for years, so the issues wasn't a lack of experience.
I was having an issues with my device being reported as 'Offline'. Despite downloading the SDK several times I was unable to get the latest version.
I posted a thread last week with the updated version of adb needed for OS X in case anyone runs into this same issues that I did: http://forum.xda-developers.com/showthread.php?t=2390999
wad3g said:
I just saw this post so I figured I may as well chime in. I've been rooting devices and using adb for years, so the issues wasn't a lack of experience.
I was having an issues with my device being reported as 'Offline'. Despite downloading the SDK several times I was unable to get the latest version.
I posted a thread last week with the updated version of adb needed for OS X in case anyone runs into this same issues that I did: http://forum.xda-developers.com/showthread.php?t=2390999
Click to expand...
Click to collapse
Hi wad3g, was the problem you ran into related to the link for the Mac sdk I posted in the guide? If it was with my link I'd like to fix it so others don't have the same issue. Thanks!
EDITED TO ADD: Please only use the link in the how-to for the full sdk from Google. wad3g's link only has adb but not fastboot. To complete the rooting process you will need fastboot also.
geckocavemen said:
Hi wad3g, was the problem you ran into related to the link for the Mac sdk I posted in the guide? If it was with my link I'd like to fix it so others don't have the same issue. Thanks!
Click to expand...
Click to collapse
Yes, it is from the same link as above on Google's developer site. They hadn't updated the SDK yet, so each time I downloaded ADB v1.0.29 - ADB for 4.2. I was finally able to find ADB & Fastboot v1.0.31 for Android 4.3. Also, just so you know, the .zip on my thread is not the full SDK. If you're not a developer you don't need the full SDK, so for most the rooter's here my zip will be all that is needed.
You may just want to mention checking what version of ADB you're running prior to start or if you're having any issues. If you're running an older version than 1.0.31 you need to update.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hope this helps! Let me know if you have any other questions.
Thanks wad3g. But just to clarify, Google updated the Mac version of the sdk on the 29th of July so the link in the original how-to will work for any version of Android. It's the same thing I used to download the sdk and I'm running version 1.0.31. Also, as mentioned it does contain more than is strictly necessary for unlocking and rooting. However, the original link in the how-to will provide you with the most up-to-date version of the Mac sdk that Google has released, should they update it in the future.
Please Help!!!
Hi I followed all your instructions and right when i was ready and tried to flash the recovery, I get this list of options after waiting for device:
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
format <partition> format a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache (and format
if supported by partition type)
-u do not first erase partition before
formatting
-s <specific device> specify device serial number
or path to device port
-l with "devices", lists device paths
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address. default: 0x10000000
-n <page size> specify the nand page size. default: 2048
-S <size>[K|M|G] automatically sparse files greater than
size. 0 to disable
I don't understand what I should pick or if I should pick any. Please help as soon as possible.
EDIT: The reason I got this list is because I dragged in the fastboot into the terminal because when I tried to enter ./fastboot flash recovery openrecovery-twrp-2.6.0.0-flo.img, it said this: -bash: fastboot: command not found
Don't worry you haven't broken anything. What you saw is basically just a message that says you entered an incorrect command and then it presents a list of acceptable commands. Just start the section C. Rooting over again and don't move the recovery file into the command window...just type the full name of the recovery file instead.
EDIT...I think I didn't understand your edit properly the first time. I think you got the bash message because terminal was no longer pointed at the platform-tools folder. To do the rooting process you must make sure terminal is still directed at platform-tools folder. It should still be if you didn't close terminal or do anything else in terminal after the unlocking process. However, if terminal is not directed to the platform-tools folder you can use the "cd" command found in part B. of the how-to to get terminal pointed to the right place again. Once you've done that you can just start Part C. again and all should be fine. When I rooted I just left terminal open after completing the unlocking process and it was still directed at platform-tools. If you closed terminal it wouldn't be pointed at the right location where fastboot is.
One other thing: Are you sure there is a fastboot file in your platform-tools folder? It should look just like the adb file except it will be named fastboot instead.
LAST EDIT PLEASE READ: I'm assuming you used wad3g's download because I just checked and it does not have a fastboot file in it and that is why you got the -bash message. Please use the link in the how-to to download the full sdk from google. Pull out the fastboot file from Google's sdk and put it wherever you put your adb file that you got from wad3g. At that point you will be able to continue with Part C. Rooting.
Hope that last edit of mine helped out. Just follow the how-to step by step (including my links) and you'll be ok.
Thanks So Much But One Last Question
geckocavemen said:
Don't worry you haven't broken anything. What you saw is basically just a message that says you entered an incorrect command and then it presents a list of acceptable commands. Just start the section C. Rooting over again and don't move the recovery file into the command window...just type the full name of the recovery file instead.
EDIT...I think I didn't understand your edit properly the first time. I think you got the bash message because terminal was no longer pointed at the platform-tools folder. To do the rooting process you must make sure terminal is still directed at platform-tools folder. It should still be if you didn't close terminal or do anything else in terminal after the unlocking process. However, if terminal is not directed to the platform-tools folder you can use the "cd" command found in part B. of the how-to to get terminal pointed to the right place again. Once you've done that you can just start Part C. again and all should be fine. When I rooted I just left terminal open after completing the unlocking process and it was still directed at platform-tools. If you closed terminal it wouldn't be pointed at the right location where fastboot is.
One other thing: Are you sure there is a fastboot file in your platform-tools folder? It should look just like the adb file except it will be named fastboot instead.
LAST EDIT PLEASE READ: I'm assuming you used wad3g's download because I just checked and it does not have a fastboot file in it and that is why you got the -bash message. Please use the link in the how-to to download the full sdk from google. Pull out the fastboot file from Google's sdk and put it wherever you put your adb file that you got from wad3g. At that point you will be able to continue with Part C. Rooting.
Click to expand...
Click to collapse
Again in a bit of a sticky pickle. I got it to work because my problem was that I didn't direct the terminal to the folder. Now I am booted into TWRP but I don't understand what you mean by the SuperSu file. I it just the whole folder titled UPDATE-SUPERSU-v1.51?
EDIT: OMG IT WORKED!!! Thanks so much I got it rooted and it works awesome now!!!
Best tutorial for mac ever
I found this so helpful and easy! My nexus 7 is rooted now!:good:
:good::good::good::good:
thanks a lot
Thanks for the guide.
Want to say thanks for your very detailed explanations.
If I may, I would like to suggest one more step after the final step. Make a Nandroid backup. That really helps a lot for people who screwed stuff up.
Yes, creating a nandroid backup is very important and can definitely save you when flashing Roms and stuff if something goes wrong. Creating a nandroid before rooting could get you back to stock with an unlocked botloader too. But I guess that isn't as important now that Google has released the factory images.
Sent from my Nexus 7 using xda app-developers app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Setup, Preparation and Prerequisites
I know there are already a few root guides out there for this phone, but I found that they weren't very detailed. This guide is thorough and explains each and every step in a noob-proof manner.
Basic tasks that I may refer to throughout this guide:
Open command prompt - Press Window Key + R, type in "cmd" (without the quotes), and hit enter.
Enter fastboot mode- Turn the phone off. Hold volume up + power until the "fastboot" screen appears.
ADB and Fastboot Installation
Download the full Android SDK here (scroll to the bottom of the page>DOWNLOAD FOR OTHER PLATFORMS>SDK Tools Only) or get a slimmed version containing only the essential components here
Extract the zip and place the android-sdk-windows folder on your desktop.
**If you chose to download the slimmed sdk skip to step 5**
Only if you downloaded the full sdk: Go into the android-sdk-windows folder and run SDK Manager.exe. Install the following packages (there are a total of 4 packages):
- Tools > Android SDK Tools, Android SDK Platform-tools
- Extras > Android Support Library, Google USB Driver
Only if you downloaded the full sdk: Go back into the android-sdk-windows directory, and you should see a new folder named platform-tools. If you don't see this new folder, repeat the step above.
To confirm that it is indeed working, open a command prompt window and enter the following commands:
Code:
cd Desktop/android-sdk-windows/platform-tools
adb version
If it displays "Android Debug Bridge version x.x.xx" it is working. If it is gives an error saying that adb is not a recognized command, it has not been successful. Carefully repeat the steps above if this is the case. Close the command prompt window when you are done.
Show File Extensions - Open a command prompt window and run "Control folders" (without the quotes). Go to the View tab and uncheck the "Hide extensions for known file types" option. This will help avoid confusion when renaming files.
Battery - Ensure that your phone has at least 60% battery remaining, and that your PC is plugged in and wont shut down spontaneously during the process. The procedure doesn't take very long (5-15 minutes), but its best to have enough charge in case something goes wrong.
Backup (Optional) - Unlocking the bootloader will completely wipe all data from the device. This includes apps, settings and even the contents of the internal sdcard (pictures, music, etc.). Copy all important files off the phone onto a PC or upload them to a cloud.
Driver Installation - Download and install the Universal ADB Driver. Alternatively, use this method.
Downloads
Download a custom recovery and the SuperSU zip below. Place both files (recovery image and root zip) in the platform-tools folder located on your desktop within the android-sdk-windows folder.
Custom Recovery:
TeamWin Recovery Project (TWRP)
Root:
SuperSU
Information
Rooting this device is actually quite a simple and easy process. Before you begin, it is recommended that you at least try to understand what each part of the process will do. Although this guide will elongate each step in order to show all of the details, the method used can be broken up into 3 main steps: Unlocking the Bootloader, Installing a Custom Recovery and finally Rooting. Each new step relies on the previous step to have been completed, and a basic summary of each part is:
Unlocking Bootloader: Opens the door to the internal memory of the device to be written on to. This allows you to flash images onto the main partitions of the phone.
Installing a Custom Recovery: A custom recovery is flashed onto the recovery partition of the device and overwrites the stock recovery that exists by default. Custom recoveries bring lots of functionality and give you the ability to perform wipes, install flashable zips, create full backups of your NAND (Nandroid backup), and various other features. An unlocked bootloader is needed to install a custom recovery.
Rooting: You can gain root by either flashing via recovery a pre-rooted custom rom, or flashing a zip containing the SuperSU binaries. A custom recovery is necessary to do this.
After completing these steps your phone will be rooted, the phone will have a custom recovery installed, and the phones bootloader will be unlocked. This, in my opinion, is the most practical and beneficial method for rooting your phone. It gives you some basic adb/fastboot knowledge, and should hopefully help you have a decent understanding of what is going on. Also this method will work regardless of what android version your phone has.
If you are confused by anything in this guide, I would highly suggest getting it clarified being before moving on. Ask your question in this thread and I or someone else will likely answer. Also I'd suggest that you read over the whole thread a few times before actually doing anything to the phone.
Understand? Good...lets begin:
1. Unlocking Bootloader
Turn the phone off. Then boot it into fastboot mode by holding volume up + power. The phone will display "fastboot" text indicating that it has successfully entered fastboot mode.
Plug the phone into your PC, then open a command prompt window and type:
Code:
cd Desktop/android-sdk-windows/platform-tools
Code:
fastboot devices
This command will list the connected devices. If your phones serial number shows up you are good to go and may continue. If the phone is NOT listed this indicates that your drivers are not installed correctly. In order for you to continue you must fix your drivers so that your phone is listed under fastboot devices.
If the phone has been recognized by the command above, proceed to unlocking the bootloader with the following command:
Remember that this step will wipe EVERYTHING off the phone
Code:
fastboot oem unlock
After the above command has finished excuting, run the following
Code:
fastboot reboot
The phone will reboot. Wait until the phone has fully booted up into android, then adjust the following settings on the phone:
USB Debugging - On your phone go to Settings > About phone > Tap on Build number 7 times. This will enable Developer options. Now go back to Settings > Developer options > Enable USB debugging
Disable CM Recovery Protection - On your phone go to Settings > Developer options. Then disable the 'Update recovery with system updates' option.
Close the command prompt window and proceed onto the next section of the guide.
2. Installing a Custom Recovery
Turn the phone off. Then boot it into fastboot mode by holding volume up + power.
Rename the recovery file that you downloaded above to recovery.img. *Make sure that you rename it to recovery.img NOT recovery.img.img* Remember that this file should be placed in the platform-tools folder inside of the android-sdk-windows folder on your desktop.
Open a new command prompt and run the following commands:
Code:
cd Desktop/android-sdk-windows/platform-tools
Code:
fastboot flash recovery recovery.img
Once the flash has completed type the following command to reboot the phone:
Code:
fastboot reboot
After the phone has booted back up, turn it off. Now to enter your newly installed custom recovery, hold volume down + power. The phone should boot into recovery mode. Now that you have a custom recovery, you may continue to the final step.
Close the command prompt window.
3. Rooting
Now that your phone has an unlocked bootloader and a custom recovery installed you have a two options to gain root (Pick one or the other. You don't need to do both)
Option A) Flash SuperSU binaries which will give you root with the stock ROM
Confirm that you have downloaded the SuperSU zip from the downloads section above and that it is located in the platform-tools folder inside of the android-sdk-windows folder on your desktop.
Turn the phone off then boot into recovery mode by holding volume down + power. Leave the phone at the main screen of the custom recovery for now.
Open a command prompt window and run the following commands:
Code:
cd Desktop/android-sdk-windows/platform-tools
Code:
adb push UPDATE-SuperSU-v[COLOR="Red"]X[/COLOR].[COLOR="red"]XX[/COLOR].zip /sdcard/
This will copy the SuperSU zip onto your phone. Once the command has completed continue.
Instructions for TeamWin Recovery Project (TWRP):
Install > browse to SuperSU zip and select the it
Swipe to confirm the installation. Then reboot.
Instructions for ClockworkMod (CWM):
install zip from sdcard > choose zip from sdcard.
Next, browse to the location where you previously copied the SuperSU zip and select the it.
To confirm the installation, scroll down to "Yes" and select it. The installation shouldn't take very long, and once it has completed you may reboot.
Option B) Flash a custom rom which will come pre-rooted
Note that not all custom roms will be pre rooted, however the majority of them are. Read the OP of the ROM thread to see what the verdict is.
Copy a custom rom (you can find these in the ONE Android Development and ONE Original Android Development section) onto the phone (remember the location of where you copy it to)
Turn the phone off then boot into recovery mode by holding volume down + power. To install a custom ROM the general procedure to follow is: factory reset, wipe cache + dalvik cache, flash ROM, flash GApps. Here are the recovery specific instructions:
Instructions for TeamWin Recovery Project (TWRP):
Wipe > Swipe to Factory Reset
Install > browse to the location where you previously copied the ROM zip and select it > Swipe to confirm the installation
Install GApps using same process as ROM, then reboot.
Instructions for ClockworkMod (CWM):
wipe data/factory reset
wipe cache partition
advanced > wipe dalvik cache
install zip from sdcard > choose zip from sdcard > navigate to the location of the ROM > select the ROM > confirm the installation by selecting "Yes"
After that you may install the GApps using the same method for flashing the ROM, and finally reboot the phone.
Keep in mind that the first boot after installing a custom ROM & wiping the phone may take longer than usual, as the phone will need to rebuild the dalvik cache and initialize other first boot stuff.
Congrats! That is all! Your phone now has an unlocked bootloader, a custom recovery installed and is rooted. Enjoy
Reserved.
Thanks Dude For making this Helpful... Sure it will help us with our one plus one..........
Nice guide!!
Sent from Mallorca to your face
Great guide! Will definitely follow when my OPO arrives! :victory:
Thanks a lot for the thread sir ! Btw have some problems I m running and old XP and seems the commands don't work for me .. Would you show me a pics of your root folder on your desktop for the sdk please ?
And I have kies installed before .. Maybe drivers aren't working together ?
pro castinato said:
Thanks a lot for the thread sir ! Btw have some problems I m running and old XP and seems the commands don't work for me .. Would you show me a pics of your root folder on your desktop for the sdk please ?
And I have kies installed before .. Maybe drivers aren't working together ?
Click to expand...
Click to collapse
What do you mean the commands don't work? Could you explain if you are getting an error, what the error is, etc.
Chromium said:
What do you mean the commands don't work? Could you explain if you are getting an error, what the error is, etc.
Click to expand...
Click to collapse
Hum , so I will try to translate my commands from French lol
First I try to install 15 seconds adb installer and failed . Told me all files already copied and "stex" is missing .
After I install the sdk as you said , I put the folder on my desktop and try to get adb worked with the test entry . But my command said that there is a invalid way
pro castinato said:
Hum , so I will try to translate my commands from French lol
First I try to install 15 seconds adb installer and failed . Told me all files already copied and "stex" is missing .
After I install the sdk as you said , I put the folder on my desktop and try to get adb worked with the test entry . But my command said that there is a invalid way
Click to expand...
Click to collapse
Could you post a screenshot of the command prompt output? Thanks.
Chromium said:
Could you post a screenshot of the command prompt output? Thanks.
Click to expand...
Click to collapse
Yeah of course man , let me an hour I will show you all with pics . Thanks a lot again for helping us and for the thread sir ! I just received my One 64GB official this morning . Damn I love CM11S and this beast don't leave my hand since this morning ahah . Hope your like yours too ...
Can't wait for great PA , Carbon , Omni roms on dat crazy phone
pro castinato said:
Yeah of course man , let me an hour I will show you all with pics . Thanks a lot again for helping us and for the thread sir ! I just received my One 64GB official this morning . Damn I love CM11S and this beast don't leave my hand since this morning ahah . Hope your like yours too ...
Can't wait for great PA , Carbon , Omni roms on dat crazy phone
Click to expand...
Click to collapse
Nice, you're lucky I dont even have the phone yet...hopefully I can get my hands on it in the next couple of weeks or so, otherwise I'll probably have to go with a Nexus 5. Once you've installed a custom recovery check out my SlimRom build. I'm also planning on compiling Carbon, but first I'd like to make sure that Slim is functioning properly.
Chromium said:
Nice, you're lucky I dont even have the phone yet...hopefully I can get my hands on it in the next couple of weeks or so, otherwise I'll probably have to go with a Nexus 5. Once you've installed a custom recovery check out my SlimRom build. I'm also planning on compiling Carbon, but first I'd like to make sure that Slim is functioning properly.
Click to expand...
Click to collapse
Awesome man! Thanks for the help and ports ! If you need I should get like 3 invites this week or less so if you need one let me know , give me your mail address and I will send one your way to thank you
Hey man so here is the problem . I can recognize my One with adb , but can't fasboot after on my mac ...
Here are the commands :
macbook:android NikonografferZ$ ./adb devices
List of devices attached
51cf713e device
macbook:android NikonografferZ$ fasboot devices
-bash: fasboot: command not found
macbook:android NikonografferZ$
And if I plug my phone in Fastboot mode from start on my mac he don't recognize it ..
pro castinato said:
Hey man so here is the problem . I can recognize my One with adb , but can't fasboot after on my mac ...
Here are the commands :
macbook:android NikonografferZ$ ./adb devices
List of devices attached
51cf713e device
macbook:android NikonografferZ$ fasboot devices
-bash: fasboot: command not found
macbook:android NikonografferZ$
And if I plug my phone in Fastboot mode from start on my mac he don't recognize it ..
Click to expand...
Click to collapse
>macbook:android NikonografferZ$ fasboot devices
>fasboot
pro castinato said:
Hey man so here is the problem . I can recognize my One with adb , but can't fasboot after on my mac ...
Here are the commands :
macbook:android NikonografferZ$ ./adb devices
List of devices attached
51cf713e device
macbook:android NikonografferZ$ fasboot devices
-bash: fasboot: command not found
macbook:android NikonografferZ$
And if I plug my phone in Fastboot mode from start on my mac he don't recognize it ..
Click to expand...
Click to collapse
You are missing the "t" in fastboot. You wrote "fasboot", but it should be "fastboot". If that doesnt work, try adding the ./ prefix. ie: "./fastboot devices".
Chromium said:
You are missing the "t" in fastboot. You wrote "fasboot", but it should be "fastboot". If that doesnt work, try adding the ./ prefix. ie: "./fastboot devices".
Click to expand...
Click to collapse
Man I win i Unlock Bootloader and I flash TWRP but is it normal when I restart in recovery I still have the Cyanogen Simple Recovery ?? Damn .....
EDITED !!!! FINALLY ROOTED MY ONE PLUS ONE !!!!!!! Finally read read read 18536 threads and I win ahahha
pro castinato said:
Man I win i Unlock Bootloader and I flash TWRP but is it normal when I restart in recovery I still have the Cyanogen Simple Recovery ?? Damn .....
Click to expand...
Click to collapse
Open settings > developer options. Then look for an option that says 'Update recovery with system updates' and disable it.
Thank you for this guide, it was very easy to follow. I am now rooted and ready to spice this phone up
Sent from my One using Tapatalk
pro castinato said:
l
EDITED !!!! FINALLY ROOTED MY ONE PLUS ONE !!!!!!! Finally read read read 18536 threads and I win ahahha
Click to expand...
Click to collapse
Haha, nice. What got it to finally work?
Sent from my HTC Desire using XDA Free mobile app
Chromium said:
Haha, nice. What got it to finally work?
Sent from my HTC Desire using XDA Free mobile app
Click to expand...
Click to collapse
Some problems with the T of fastboot lol nope some drivers weird to install .. I needed to install driver even for fastbooted device with Pda.net app who work really fine !! I really thanks the pdanet software <3
Installing Lineage
Few quick things.
Since the 8T does not have a single unified guide like FunkWizard did for other OnePlus devices, I'm adding some things that are likely important, but don't necessarily have to do with installing LOS.
This will be similar to my 6T installing Lineage guide. However the 8T is a newer device, and new to me. Expect it to change and get updated as things change. I'll add in pictures like the 6T guide soon.
I also want to address a common question, you can use Windows for this process. I prefer Linux, and Fastboot just works in Linux without driver issues. If you have Fastboot and ADB working in Windows already feel free to use that if you want. If you use Windows, remove "sudo" from the commands (this is for Linux).
I am using a Global 8T, and have only tested these methods on such.
Make Sure OOS is Updated1. Start fresh, and make sure OOS is up to date.
This should be self explanatory. Go to settings, and system, check for updates. Download and install any system updates OOS has to make sure you have the latest firmware on your device.
Unlock the Bootloader2. Unlock the Bootloader
sudo fastboot flashing unlock
For this step you will need fastboot. I use Linux, and honestly I feel like it's easier and more reliable for fastboot and ADB so that's what I'm including here in these steps. It's easy to boot from a USB.
To create a bootable Linux flash drive you can use Unetbootin, which you can download for free here (Your other option would be to burn the ISO straight to a DVD and skip the unetbootin step):
https://unetbootin.github.io/
For Linux, I'm using Linux Mint Cinnamon, You can download for free here:
https://www.linuxmint.com/download.php
Then run unetbootin (yours will look a little different, I'm running it in Linux):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Point it to the Linux ISO, and tell it where an empty flash drive is. It will erase everything on the flash drive. Afterwards you can load whatever you want on the flash drive. However be aware when booting Linux from this drive you can't access what is on the drive (at least not by normal methods).
After this has successfully completed, reboot the PC, and boot from the USB drive. Your PC will boot into Linux (turning off the PC and removing the USB drive will make it boot up like normal again).
Next we need to install fastboot and adb. You need to open up the "start menu" and open the "synaptic package manager". You can find this stuff in the menus, however the easiest way to get to these items is to just start typing the name of the item. See below:
Search fastboot, click the boxes, choose install. Then search for ADB, click the boxes, choose install and then click apply. That will install most of the stuff we need, but really old versions of fastboot and adb. You must update fastboot to install LOS. Time to open up a terminal:
In the terminal run these commands to update fastboot and adb (this is downloading them directly from Google).
wget https://dl.google.com/android/repository/platform-tools-latest-linux.zip
unzip \platform-tools-latest-linux.zip
sudo cp platform-tools/adb /usr/bin/adb
sudo cp platform-tools/fastboot /usr/bin/fastboot
Next you need to make sure OEM unlocking is enabled. If you haven't tapped on the build number and enabled devloper options, do this now. enabling USB debugging for the moment, would also be helpful.
Now would be a good time to back everything up. The phone will get wiped.
Place the phone in fastboot mode. You can do this using the advanced reboot menu or ADB, or the key combinations (all key combos listed below for reference):
Volume Up + Power while turning on will boot to fastboot. (<-- Don't believe this works on the 8T)
Volume Down + Power while turn on will boot to recovery.
Holding Volume Up + Power should force the phone to turn off.
Volume Up + Volume Down should put your phone in Download mode for the MSM Tool.
If you enabled USB Debugging in the terminal window, type (the phone will pop up a warning asking you to allow USB debugging, make sure you allow this):
sudo adb reboot bootloader (<-- This command will make the phone restart to the bootloader / fastboot)
Once there type the command below. Your phone will be wiped. Make sure you backed up any important information. Use the volume buttons to select unlock, and press the power button.
sudo fastboot flashing unlock
Backing up Persist / EFS3. Backing up the persist partition and EFS backup.
dd if=/dev/block/bootdevice/by-name/persist of=/sdcard/persist.img
dd if=/dev/block/bootdevice/by-name/modemst1 of=/sdcard/modemst1.bin
dd if=/dev/block/bootdevice/by-name/modemst2 of=/sdcard/modemst2.bin
Hopefully you never need a backup of your persist paritition or EFS backup. However if anything ever happens you'll be glad you have it. The EFS contains the IMEI, so it is unique to every device. You can do this at any point as long as you have root. The easiest way, epsecially for those not want to root their device is to use the broken TWRP. I got this TWRP and a bunch of my initial rooting information from @Mpolo87 's Guide OnePlus 8T EasyRoot. It is an excellent guide. The TWRP is in step 4. This is not the way you need to root LOS though. Download this TWRP.
Once again from the terminal:
The image explained:
cd Desktop <-- Switched the directory to the Desktop the default directory when you open up the terminal is the /home directory.
sudo fastboot devices <-- Is just checking to see if my PC can see my phone, and making sure it's in fastboot. Sudo is necessary for this distro, as both fastboot and ADB must be run as root.
sudo fastboot boot recovery.img * <-- Sends that TWRP image to the phone to be booted temporarily. Only boot this, never run the command "flash".
With this TWRP loaded it is normal that the screen will be blank and just briefly flash the TWRP logo screen. All we need to do is use the terminal window on the PC. Run these commands:
sudo adb shell
dd if=/dev/block/bootdevice/by-name/persist of=/sdcard/persist.img
dd if=/dev/block/bootdevice/by-name/modemst1 of=/sdcard/modemst1.bin
dd if=/dev/block/bootdevice/by-name/modemst2 of=/sdcard/modemst2.bin
exit
sudo adb pull /sdcard/persist.img /home/mint/Desktop
sudo adb pull /sdcard/modemst1.bin /home/mint/Desktop
sudo adb pull /sdcard/modemst2.bin /home/mint/Desktop
It is important to use ADB to pull the files off of the device after creating them. They won't be accessible after you restart. Also if you are using a live Linux distro (USB) the files do not remain on the USB after you restart / power off. So you need to place these files on another hard drive or USB. The persist.img should be ~ 32MB the Modems should be ~ 2MB each. Once you have the files you can run
sudo adb reboot bootloader
Installing Lineage4. LOS 18.1 Thread
Quick Common questions:
Gapps are not included, you must sideload them if you want them. Personally I use NikGapps, LOS Recommends MindtheGapps.
Official LOS 8T Download Link
Download the latest build, and the recovery image from the link above.
You must have a current version of fastboot / adb to successfully install this. (Update method mentioned previously in this guide) To install Lineage it is as simple as the instructions listed on the LOS site.
From the terminal:
sudo adb reboot bootloader
sudo fastboot flash recovery lineage-18.1-20210506-recovery-kebab.img
Now reboot in recovery. Doesn't matter how you get there. You can use the volume keys to change the options in the bootloader, you can use volume down and power, etc. Once in Lineage Recovery we need to run the copy partitions zip. The link for this is on the LOS install page. However here is a direct link. In LOS recovery choose:
- Apply Update
- Apply from ADB
From the terminal on the PC
- sudo adb sideload copy-partitions-20210323_1922.zip
LOS recovery will warn you about the zip not being signed, flash this anyways. Hit the back button, choose advanced, and then reboot to recovery. It is now time to actually install LOS. In LOS Recovery:
- Factory Reset. (You did backup everything right?)
- Press Format data / factory reset.
- From the main LOS Recovery menu, Apply Update
- Apply from ADB
From the terminal on the PC
- sudo adb sideload lineage-18.1-20210506-nightly-kebab-signed.zip
If you want to install Gapps or Magisk, you must reboot to recovery. Go to advanced and choose reboot to recovery before install anything else. If you are only installing LOS you are ready to reboot to system now.
Optional, Gapps5. Sideloading Gapps.
For Android 11 I've been using NikGapps:
NikGapps <-- For Lineage 18.1 (Use the R Folders for Android 11. I recommend the "Core" version. I also tested Basic though if you want that level of Gapps. I strongly recommend you grab setup wizard out of the R Addons Folder, I used the regular setup wizard, not the pixel one.)
Remember you need to reboot to recovery once after installing LOS (as mentioned above). This does not mean you need to let LOS boot, just reboot to recovery, so that it switches slots.
In LOS recovery choose:
- Apply update
- Apply from ADB
Now in the terminal on the PC:
- sudo adb sideload NikGapps-core-arm64-11-20210501-signed.zip
- Remember between each zip file you must again hit apply from ADB.
- sudo adb sideload NikGapps-Addon-11-SetupWizard-signed.zip
LOS recovery will warn you about the zip not being signed, flash this anyways.
If you get a warning about them not being signed, choose flash anyways. If you are going to flash Magisk, move to the next section. If you don't need Magisk, reboot to system.
Very Optional, Magisk5. Sideloading Magisk.
All the devices I've tested with Android 11 have worked fine since Magisk 21.2. At this point I don't see a reason to still run the Canary builds unless you want to for some reason.
Download Magisk: [urlhttps://github.com/topjohnwu/Magisk/releases]Magisk GitHub Link[/url]
This will be flashed in LOS recovery. To get to recovery you can use the ADB (if you enable USB debugging), key combination, or the advanced restart menu, doesn't matter.
In LOS recovery choose:
- Apply update
- Apply from ADB
Now in the terminal on the PC:
- sudo adb sideload Magisk-v22.1.zip
If you get a warning about them not being signed, choose flash anyways. We should be ready to reboot to the system now.
Very Optional, Passing Safety Net6. Magisk Required.
These items are add-ons are flashed in Magisk after the first boot (Don't flash these in TWRP anymore):
MagiskHide Props Config
Busybox
To flash modules in Magisk press the puzzle piece icon. Then choose install from storage. Now just choose your addons. After flashing the icons it will have a reboot icon at the bottom. You can reboot or you can press back and flash another. After you are done reboot.
You will also need a Terminal Emulator. I personally use:
Terminal Emulator for Android
Once all these are installed the first step is setup Magisk. Under Magisk go to settings:
In version 20.4+ Magisk Hide is no longer on by default. So make sure the Magisk Hide, Hide Magisk from various forms of detection switch is flipped. Then press Hide Magisk Manager. This will bring up a box for you to choose a random name for the Magisk Manager, type whatever you want here. You can leave it Manager if you wish, but I typically change this.
Now open Magisk again. It will ask you to download it again, click ok, then manually open the app again as it says. Now we need to open Magisk hide. This is now under the shield icon, then click the arrow at the top:
These are the apps you don't want to know that you have root. Less is better. You can cause instability problems by just choosing everything. My general rule of thumb is, Google, steaming video, music, and payment apps get selected. In my experience if I come across an app that needs it and I didn't select it, I just clear cache and/or data and re-open the app and it works. There are some big multiplayer apps that ban hardware / people, so do your research (don't ask me, I don't play those games).
Next time to change the device fingerprint using MagiskHide Props Config Module. We do this using the terminal emulator. In the terminal emulator, type "su" to gain root privileges. Then type props to run the module:
Now it's just following the menus. Choose option 1 - Edit device finger print. (type 1, hit enter)
After this you will see a menu of devices. It doesn't matter what device you pick really. If you want apps / Google to think you have a OPPO or Samsung pick one of those Fingerprints. However there's a bit more to passing Safety-net than that. Since Google has changed how things work not all those fingerprints that used to work will work now. Also now you may get an error when you turn on the phone because of the security dates. My 8T passes saftey net, just choosing the 8T and Android 11 fingerprint. Also keep in mind some fingerprints will require Force basic key attestation to pass.
After choosing the fingerprint you want, it will ask you if you want to reboot. Choose yes. After rebooting, you may need to clear the cache from the play store for some apps to appear in it. You should now pass safety net. Check this in Magisk:
Very Optional, Ad Blocking7. Root required.
You can block many things with a hosts file, most popular would be ads. I've been use StevenBlack's host file which is a compilation of several hosts files. This is located on Github:
https://github.com/StevenBlack/hosts (Scroll down you'll see the options of what you can block)
Direct link to the hosts file I use. This will block Adware / Malware.
First we have to make the hosts file. The hosts file must use Unix / Linux line endings. If you are using Linux, don't worry about this, just create the file. If you are using Windows, the easiest thing to do is use Notepad++ (Free).
Notepad++ Downloads
Next one other caveat. The hosts file is quite large. I've never had much luck copy and pasting it from any other browser than Firefox (Windows or Linux), but however you get it into Notepad++ is not a big deal.
Once in you have the hosts file into Notepad++ go to Edit, EOL Conversion, and Choose Unix (LF).
Now save the file as "hosts" no ending. This does mean under file type you will need to change it to All File types *.*. Move this hosts file to your phone.
You will need to use a root file explorer to copy this hosts file to /system/etc/ and replace the file that is there. I used Solid Explorer for this.
Updating Lineage
Updating Lineage is pretty much the same as installing it, just without the reset or wipe. First reboot to Lineage recovery. Doesn't matter how you get there. You can use the advanced reboot menu, or the adb.
Couple things to remember:
You will need a PC for this.
Fastboot / ADB must be updated for this to work, otherwise you will have problems.
Apply Update --> Apply From ADB
- sudo adb sideload lineage-18.1-20210506-nightly-kebab-signed.zip
If you use Gapps or Magisk, you also need to sideload these. Once again you still need to reboot recovery. Hit the back button, choose advanced, and then reboot to recovery.
Apply Update -> Apply from ADB (This must be done between each zip file)
- sudo adb sideload NikGapps-core-arm64-11-20210501-signed.zip
- sudo adb sideload NikGapps-Addon-11-SetupWizard-signed.zip
- sudo adb sideload Magisk-v22.1.zip
If you get a warning about them not being signed, choose flash anyways.
Then reboot to system. If you were using a hosts file for adblocking you will need to put that back as well when it boots. This gets replaced during the update.
Cliff Notes
Hopefully you've backed up EFS and persist partition.
Fastboot and ADB must be current version. You will have issues if they are old.
If you are using Windows remove "sudo" from the commands. This is for Linux only.
Once you install Gapps you need to continuing installing Gapps. If you want to go without Gapps after installing them, do a clean install.
Installing Lineage
sudo adb reboot bootloader
sudo fastboot flash recovery lineage-18.1-20210506-recovery-kebab.img
Apply Update --> Apply From ADB
- sudo adb sideload copy-partitions-20210323_1922.zip (assuming this is a new install) (you can skip wiping data if you are updating)
Reboot to Recovery (This option is in the Advanced Menu of LOS Recovery)
Choose factory reset, and format data (assuming this is a new install) (you can skip wiping data if you are updating)
Apply Update --> Apply From ADB
- sudo adb sideload lineage-18.1-20210506-nightly-kebab-signed.zip
If you want to sideload Gapps / Magisk you must reboot recovery now (This option is in the Advanced Menu of LOS Recovery). If you are only installing Lineage, you are ready to reboot to system.
In LOS recovery choose:
- Apply update
- Apply from ADB
Now in the terminal on the PC:
- sudo adb sideload NikGapps-core-arm64-11-20210501-signed.zip
- sudo adb sideload NikGapps-Addon-11-SetupWizard-signed.zip
- sudo adb sideload Magisk-v22.1.zip
If you get a warning about them not being signed, choose flash anyways. We should be ready to reboot to the system now.
Updating Lineage
Using LOS Recovery:
Apply Update --> Apply From ADB
- sudo adb sideload lineage-18.1-20210506-nightly-kebab-signed.zip
If you use Gapps or Magisk, you also need to sideload these. Once again you still need to reboot recovery. Hit the back button, choose advanced, and then reboot to recovery.
Apply Update -> Apply from ADB (This must be done between each zip file)
- sudo adb sideload NikGapps-core-arm64-11-20210501-signed.zip
- sudo adb sideload NikGapps-Addon-11-SetupWizard-signed.zip
- sudo adb sideload Magisk-v22.1.zip
If you get a warning about them not being signed, choose flash anyways.
Then reboot to system. If you were using a hosts file for adblocking you will need to put that back as well when it boots. This gets replaced during the update.
Woah, this is awesome, moving from my old Note 5 to a OP8T very soon (Currently in shipping, I'll have it in hand in a week or so if all goes well, very excited). This will be my first time poking around with Oneplus, or any new device for that matter (I've never dabbled in the AB system and stuff yet) and a guide like this is exactly what I need. Thank you so much!
Guide is updated, with update instructions, and cliff notes. I updated to the new build today. No issues.
For adblock you should add Adaway in there for an easier/safer option. You also get automatic host file updates then too
Very nice sir, very nice indeed!
Are these commands the same for windows?
I have been out of development for a long time. Last roms I built was Windows mobile 5. Probably around 2009. I must admit I'm a little lost in all the new terminology.
I have a T-mobile 8T+5G and SIM is unlocked and waiting on Boot loader unlock token to arrive tomorrow.
If anyone is interested in helping hold my hand through install, root etc I will gladly give a tip for your time. I have windows and and fastboot working. PM me for contact information.
bobsbbq said:
Are these commands the same for windows?
I have been out of development for a long time. Last roms I built was Windows mobile 5. Probably around 2009. I must admit I'm a little lost in all the new terminology.
I have a T-mobile 8T+5G and SIM is unlocked and waiting on Boot loader unlock token to arrive tomorrow.
If anyone is interested in helping hold my hand through install, root etc I will gladly give a tip for your time. I have windows and and fastboot working. PM me for contact information.
Click to expand...
Click to collapse
It is the same commands for windows. Just need to install the proper fastboot and adb binaries and drivers for windows (can easily be found by searching).
bobsbbq said:
Are these commands the same for windows
Click to expand...
Click to collapse
Just remove "sudo" from them. The distro I'm using requires fastboot / ADB to be run as root. Sudo obviously won't work and isn't needed in Windows. Everything else is the same.
Could you add "Revert Back to OOS from Lineage Guide" too ? Just in case people want to restore OOS !
rohanhole said:
Could you add "Revert Back to OOS from Lineage Guide" too ? Just in case people want to restore OOS !
Click to expand...
Click to collapse
This I should probably mention as this device doesn't really have an easy way to return back to stock at the moment. At least without using the MSM Tool, that I know of? At the moment you will need to use the MSM tool.
MSM / Unbrick Tool Thread <-- Instructions / Guide Included in that thread. * Remember using this tool will wipe your data, and it will relock your bootloader.
Also that is the regular 8T thread, TMobile users wanting the TMobile version would use the TMobile Thread.
jwarrior319 said:
For adblock you should add Adaway in there for an easier/safer option. You also get automatic host file updates then too
Click to expand...
Click to collapse
I'm not sure about safer? Again I'm making some assumptions I guess... I've never used Adaway, always used a hosts file. For what it's worth there is an adway add on in the NikGapps addon folder. At some point maybe I'll try and test this.
OhioYJ said:
This I should probably mention as this device doesn't really have an easy way to return back to stock at the moment. At least without using the MSM Tool, that I know of? At the moment you will need to use the MSM tool.
MSM / Unbrick Tool Thread <-- Instructions / Guide Included in that thread. * Remember using this tool will wipe your data, and it will relock your bootloader.
Also that is the regular 8T thread, TMobile users wanting the TMobile version would use the TMobile Thread.
I'm not sure about safer? Again I'm making some assumptions I guess... I've never used Adaway, always used a hosts file. For what it's worth there is an adway add on in the NikGapps addon folder. At some point maybe I'll try and test this.
Click to expand...
Click to collapse
Another way to revert back to OOS is to use the payload dumpster tool with a full ota zip and flash all the images. There's a thread already with instructions on that.
Edit: https://forum.xda-developers.com/t/guide-convert-tmo-to-global-eu-or-other-variant.4188491/
Under manually in post 1
jwarrior319 said:
Another way to revert back to OOS is to use the payload dumpster tool with a full ota zip and flash all the images. There's a thread already with instructions on that.
Edit: https://forum.xda-developers.com/t/guide-convert-tmo-to-global-eu-or-other-variant.4188491/
Under manually in post 1
Click to expand...
Click to collapse
I figured this might be possible, but I hadn't tried yet. Very helpful. MSM should always be a last resort.
I had already rooted and flashed the LOS ROM. I forgot to come back to this guide. I did not back up the persist and modem files. Is it too late for that now?
bobsbbq said:
I had already rooted and flashed the LOS ROM. I forgot to come back to this guide. I did not back up the persist and modem files. Is it too late for that now?
Click to expand...
Click to collapse
I don't think linage touch these paritions (at least not the persist one), but I might be wrong. In either case I would take a back up of persist and the modems now, as a backup from now is probably better than no backup if you get any problems later on.
Is there supposed to be F-Droid and Micro-G in the base LOS Rom? I don't have either. Sorry still trying to get use to this.
bobsbbq said:
Is there supposed to be F-Droid and Micro-G in the base LOS Rom? I don't have either. Sorry still trying to get use to this.
Click to expand...
Click to collapse
No it is not.
Got LOS installed, still does fastboot loop. Sideloaded Magisk 21.4, failed. Can't get past fastboot....hasn't booted to LOS even once
.
Anyone? No sense in trying it again until there's some feedback.
Device is NOT bricked. Can still reinstall the ROM, just will not boot to LOS...
Success!
You have to use r31.0.0 platform-tools
Linux users run commands as ROOT & add ./ before fastboot (./fastboot)
ANNOUNCEMENT: I'M STOPPING THE FOLLOW UP AND UPDATE OF THIS TOPIC TODAY, IF SOMEONE WANTS TO TAKE OVER, CONTACT THE MODERATOR IN THIS LINK.
THE TOPIC REMAINS AS IT IS AND WILL NOT BE UPDATED ANYMORE (BY ME ANYWAY!)
GOOD CONTINUATION TO ALL
Installing an OTA.zip Update with ADB Sideload
- Disclaimer: I don't take any responsibility for anything you do to your tablet, which is to transform it into brick, break, or transform it into coffee machine -
Click to expand...
Click to collapse
In this thread you will find different ways to install an OTA update :
Via ADB SIDELOAD (this post) - Via Recovery Mode - Via Local Upgrade
I am writing this tutorial on ADB Sideload, one more on this topic, in order to be able to push an OTA Zip update, which for some reason could not be done properly.
Sometimes manufacturers allow users to make links or zip files of OTA updates available to other users. Once you have downloaded the OTA zip file, you will need this tutorial to proceed with the installation.
I borrowed the first two screenshots from the web so that I could explain clearly with pictures.
In the end it is very simple and requires little command line knowledge. But you will need to check some things:
- Firmware stock
- Unmodified system partition
- Third party apps like Magisk, Xposed Framework, and as a precaution TWRP Recovery should not be installed on your smartphone
Before starting, here is the list of prerequisites to perform the sideloading of the OTA package.
1. Have a backup of your data, even if theoretically performing a sideload will not erase your data,
2. Download the USB Drivers from the manufacturer, or the latest one from Google ( Link )
3. If you haven't already done so, you must download and install Android SDK Platform-tools (platform-tools_r33.0.2-windows.zip)
4. Don't forget to push on this folder "platform-tools" the file named "Global full Nothing OS 1.1.0.zip" - for example- that you need
4. And finally you will have to activate the USB debugging of your Phone(1) : to do so, you have to go to : Settings => System => Advanced => Type 7 times on the build number => once done, a pop-up will appear and will tell you that you have become a "Developer" => On some devices you will have to type in the Pin code.
5. Once you have become a developer => go back to System => Developer Options => Enable the USB Debug toggle
6. That's it if you are ready to do a Sideload, but also other operations!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These prerequisites are essential for this and a number of other operations.
You are ready, the tension is rising! You will succeed!
To do this, you must reboot your Phone(1) into the standard recovery system and you have 2 ways to reboot into Recovery.
1. You can use the hardware key combination specific to your smartphone.
2. Or use the ADB command
Booting into Recovery Stock mode with the ADB command
You go to the start screen of your PC and in the search bar you type:
Code:
cmd
and then press Enter. The command prompt starts.
Depending on where you have placed your "Platform-tools" folder you type:
Code:
C:\WINDOWS\system32>cd c:\platform-tools
and you should see on your command line screen
Code:
c:\platform-tools>
Once you are in your Platform-tools folder, connect your smartphone to your PC, making sure that USb debugging is effective.
Type the following command: adb devices and you should see the identification of your smartphone
When you run an ADB command, you should see an RSA key prompt on your smartphone screen asking you to allow USB debugging. Press OK to allow it.
Type the following command: adb reboot recovery
Then the command: adb sideload "file name".zip - For the example, I typed the full name of the file, but you can rename the file shorter like "nothing_ota".zip
That's it, normally the installation is started and you just have to wait for the update to be installed on your device. Once the installation is successful, you can restart your device.
I hope this tutorial has helped you to push an OTA.zip update.
Go ahead now
Installation via recovery mode
The recovery mode of the Phone(1) is similar to that of the Google Pixel. This allows you to easily sideload the update packages via the recovery interface.
To perform this process, here are the steps and requirements:
Have downloaded the .zip file of the update to your computer
Your Phone(1) must be recognised by the ADB command on your computer
The Process:
Go to your Shell terminal, then run the recognition command:
Code:
adb devices
then the command :
Code:
adb reboot recovery
On your Phone(1) screen, you should see this "No command"
While pressing the Power button, press the Volume Up button then release both buttons quickly. The Android recovery menu should be visible.
Nothing Phone 1 recovery mode
On your Phone(1) screen, select the option: Apply update from ADB.
On your computer, run the command:
Code:
adb devices
This should return the serial number of the device with the 'sideload' next to its name, indicating that your device is connected to the computer in sideload mode.
On your computer, run the command:
Code:
adb sideload "filename".zip
The "filename" part should be replaced with the full path, followed by the name of the file downloaded in step 1.
The update will be installed on your phone.
Once the installation is complete, select "Reboot system now" on your phone to reboot into the new version.
Well done, you have installed the new update of Nothing OS to your Phone(1) with success
To date I still haven't received my phone(1). Once I have it in my hands, I will make screenshots about this tutorial.
Install OTA using Local Upgrade method
Create a folder named “ota” (without the quotes) at the root of the internal storage. Meaning outside every folder.
Copy the OTA update ZIP file from above to that folder.
Open the phone app and Dial ##682##
This should launch an offline update tool.
The tool will scan for an OTA file from internal storage and install it.
If that fails, you can manually browse for the OTA package.
After selecting the OTA file, the wizard will apply the update.
Reboot the device and you are on the latest firmware.
Reserved 3
I think also after update, reboot, redo the step and sideload also Magisk for keep root
Pho3nX said:
I think also after update, reboot, redo the step and sideload also Magisk for keep root
Click to expand...
Click to collapse
Yes I agree, but those tutos are for everyone, and everyone doesn't rooted his smartphone like us
So I won't confuse them
hello, thanks for the guide, when I do all the steps without any problems and reboot, it opens with the old version, where could I be doing wrong?
This will work to downgrade the phone also?
pankspoo said:
This will work to downgrade the phone also?
Click to expand...
Click to collapse
no, np1 has a very strict anti rollback check. I don't suggest to downgrade this phone
sh4tteredd said:
no, np1 has a very strict anti rollback check. I don't suggest to downgrade this phone
Click to expand...
Click to collapse
So we can use your Windows tool to downgrade ?
pankspoo said:
So we can use your Windows tool to downgrade ?
Click to expand...
Click to collapse
I won't downgrade this phone at all. Btw maybe I'm wrong and it can work but I'm not sure and I don't suggest to do it
Hi, I am currently trying to update from Nothing OS 1.1.3 to 1.1.4 but i keep receiving this error even though i have uninstalled magisk, didn't modify my system partition and have a stock firmware. The phone is still able to boot correctly after this failed installation but i cannot flash the new update.
demiii said:
Hi, I am currently trying to update from Nothing OS 1.1.3 to 1.1.4 but i keep receiving this error even though i have uninstalled magisk, didn't modify my system partition and have a stock firmware. The phone is still able to boot correctly after this failed installation but i cannot flash the new update.
View attachment 5716899
Click to expand...
Click to collapse
Which version of ADB Sideload do you use ?
Post 1 or Post 2
Sib64 said:
Which version of ADB Sideload do you use ?
Post 1 or Post 2
Click to expand...
Click to collapse
What I did was reboot to recovery, navigate to Apply Update via Sideload through the recovery interface and from there entered the command adb sideload filename.zip so i guess it is the method in post 2
UPDATE:
I have tried the method in Post 1 and this error shows up:
UPDATE 2:
I have tried revoking USB DEBUGGING authorization, adb kill-server, adb start-server and authorizing again
I have tried deleting adbkey and adbkey.pub files in C:Users/$Name/.android
I have tried following suggestions about solving this error both from this and this StackOverflow thread
Nothing worked for me.
You don't need to use ADB to sideload an OTA, the nothing phone contains an OTA updater In the phones os already, the only thing you need the computer for is to move the OTA to the phone
Here is what someone on the nothing discord said to do and it worked
dont sideload
Create a folder named “ota” (without the quotes) at the root of the internal storage of your phone. Then copy the update ZIP file to that folder.
Dial `*#*#682#*#* `to open up the offline update tool.
You can also use an activity launcher app to locate and execute the “OfflineOTAUpgrade” tool. The package name of the tool is com.nothing.OfflineOTAUpgradeApp.
Hi, I have just tried your method but an error window pops up:
Hello, can I normally use in built in recovery updater to upgrade to 1.1.4 if I'm rooted and have Nacisk installed?
Ky0sHiR0 said:
Hello, can I normally use in built in recovery updater to upgrade to 1.1.4 if I'm rooted and have Nacisk installed?
Click to expand...
Click to collapse
You can only upgrade not downgrade
demiii said:
Hi, I have just tried your method but an error window pops up:
View attachment 5717197
Click to expand...
Click to collapse
If you go on nothing discord and put that error maybe they can help