Related
have flashed and running 4.4 since it became available from Google, and got the other day a small OTA update (9mb) flashed this but after that it will not boot the phone, just get stuck at Google screen, so I tried to flash stock image again, but now nothing works.
've tested with flash all.bat in platform tools, all different toolkits I've found, return to stock and unroot, reinstalled usb drivers, I cannot enter in recovery and attempt to clean either.
whatever I try to flash, I get "error: out of memory" somewhere.
[url]http://i41.tinypic.com/2v10wwk.jpg[/url] [/ IMG]
Skickat från min ST27i via Tapatalk 2
Hi all,
I was trying to update muy PA 3.99 to the latest one. Then I did the factory reset and then tried to install it. When I tried to install pa_mako 4.3 - Beta 3, it says that there was an error:
Warning: No file_contextsset_metadata_recursive: some changes failed
E: Error in /sdcard/0/pa_mako-4.3-BETA3-20140506.zip (Status 7)
Instalation aborted.
I already realized that the problem is that I need to update the Clockworkmod b4 doing this. But now my phone won't boot untill home screen... it always goes back to the CWM screen.
I have tried to restore the latest backup, but it says MD5 mismatch.
Also, I can't access my mobile using USB, even with the proper Drivers installed (it won't get recognized by windows).
I am lost.... can anyone help me?
I already tried the Nexus toolkit, but i dont know what is going wrong that it also can't connect to my Nwexus 4.
Desperate mode off haahhaha
Just followed this tutorial:
http://forum.xda-developers.com/nexus-4/help/guide-ultimate-nexus-4-root-guide-t2018179
You can flash/update clockworkmod while fastboot mode, and then reflash your rom.
Did you installed the usb drivers? Did you tryed to reflash some other rom before 4.2.2
Btw check also device manager or its connected.
Verstuurd vanaf mijn Nexus 4 met Tapatalk
Last year I bought the nexus 6 and for the first time (I've had a lot of android phones) in my phone was also disabled force encryption after the bootloader unlock, twrp and root. So I decided to decrypt it because reading on the nexus 6 forum some devs suggested this to increase the phone performances.
But is also the same with the nexus 6p?
I read that now twrp supports encryption and that Google increased the phone performance also with force encryption enabled.
So do you suggest to flash a modified boot.img to decrypt or this time I can only unlock, flash twrp and supersu?
Inviato dal mio iPad utilizzando Tapatalk
mouse100 said:
Last year I bought the nexus 6 and for the first time (I've had a lot of android phones) in my phone was also disabled force encryption after the bootloader unlock, twrp and root. So I decided to decrypt it because reading on the nexus 6 forum some devs suggested this to increase the phone performances.
But is also the same with the nexus 6p?
I read that now twrp supports encryption and that Google increased the phone performance also with force encryption enabled.
So do you suggest to flash a modified boot.img to decrypt or this time I can only unlock, flash twrp and supersu?
Inviato dal mio iPad utilizzando Tapatalk
Click to expand...
Click to collapse
Regardless of whether you're going to decrypt you still need the modified boot.img in order for root to work. I've seen some testing results and the performance gains after decrypting are negligible.
Hello,
my brand new X800 hard bricked last night while flashing the first custom ROM: it ended the process in TWRP 3.0.1 and screen shut down never to light up anymore.
When I connect it to the PC it gets recognized as a Qualcomm device in 9008 state, I managed to find a lot of flashing tools which actually finds the COM port used by that but I don't have the RUU/Fastboot ROM/whatever files I need to revive the device. I read in LeMe USA forums that LeTV won't offer an unbrick tool (http://forum.le.com/us/index.php?th...back-to-life-a-hard-bricked-dead-x800-pro.264), can somebody help me out on that? I found this Chinese forum and you can see a screenshot of a "Letv flash tool"but I can't understand how to get that (http://bbs.ydss.cn/thread-627786-1-1.html).
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
http://www.androidbrick.com/download/letv_leeco_x800_x900_unbrick_files_qdloader_9008/ (they ask for a password?)
Thank you so much for your help.
le1 pro unbrick
contact me: [email protected]
teorouge said:
Hello,
my brand new X800 hard bricked last night while flashing the first custom ROM: it ended the process in TWRP 3.0.1 and screen shut down never to light up anymore.
When I connect it to the PC it gets recognized as a Qualcomm device in 9008 state, I managed to find a lot of flashing tools which actually finds the COM port used by that but I don't have the RUU/Fastboot ROM/whatever files I need to revive the device. I read in LeMe USA forums that LeTV won't offer an unbrick tool (http://forum.le.com/us/index.php?th...back-to-life-a-hard-bricked-dead-x800-pro.264), can somebody help me out on that? I found this Chinese forum and you can see a screenshot of a "Letv flash tool"but I can't understand how to get that (http://bbs.ydss.cn/thread-627786-1-1.html).
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
http://www.androidbrick.com/download/letv_leeco_x800_x900_unbrick_files_qdloader_9008/ (they ask for a password?)
Thank you so much for your help.
Click to expand...
Click to collapse
Fine, I got to download the files from another link!
Here you can find the recovery package, the flasher, qcom drivers and adb/fastboot+android drivers:
https://mega.nz/#F!h0AV3SiB!vq9S-E622UeKmU16USJNHA
Too bad I can't flash because I get an error (error.txt)
Code:
-p COM3 -f D:\qfil\Qfil\tmp\prog_emmc_firehose_8994_lite.mbn -x D:\qfil\unsparse.xml Version 2.2 Downloading flash programmer: D:\qfil\Qfil\tmp\prog_emmc_firehose_8994_lite.mbn Successfully open flash programmer to write: D:\qfil\Qfil\tmp\prog_emmc_firehose_8994_lite.mbn Waiting for flash programmer to boot Programming EMMC device using SECTOR_SIZE=512 <?xml version = "1.0" ?><data><configure MemoryName="emmc" ZLPAwareHost="1" SkipStorageInit="0" SkipWrite="0" MaxPayloadSizeToTargetInBytes="16384"/></data> ERROR: No response to configure packet Status: 21 (null)
More info and screenshots:
http://www.letv.re/topic/177-bricked-phone-x800/
-->01.png: my flasher config
--> 02.png: how my PC sees the X800
--> 03.png: some error I get AFTER flash fails
--> 04.png: flasher
--> 05+06-png: files in recovery package (Qfil***.zip)
--> 1/2/3/4.png: flashing istructions I can't speak any Chinese language, I really hope someone can translate the writings in the png's; of course I hope someone can help me even harder. Thanks!
Same problem.
I also have the same problem. I think Qfil rom was not correct. If the rom version is correct, it might work.
Hi, I have talked with cuoco92 (known ROM cooker) and he told me the reason for these bricks and how we maybe can unbrick them. For that we need the file emmc_appsboot.mbn from the LeTV X800 US version. Unfortunately there is nowhere to download the US firmware, and it seems that LeTV will also not help to share it. So that's why the only way is if someone is going to extract it from a working LeTV X800 US version.
The reason why the QFIL method doesn't work is that the firmwares files are only for the Chinese version, and that will not work on the US version. So the method will always fail. Actually I got a step further with the QPST/QFIL connection where it actually succeeded in connecting to the Sahara protocol, saying "Sahara protocol completed" and "Switch To FireHose" ** All is well ** SUCCESS!! but it all ended up with another error as it later again couldn't connect to the port, and I got Download Fail:FireHose Fail FHLoader Fail: Proess fail....
The reason for the brick in the first place is that all the guides on how to install TWRP etc. on the net are made for the Chinese LeTV X800, if someone tries it on the LeTV X800 US version it will end up bricking the phone completely. So beware if the guides doesn't specific say that it also works on the US version then don't try to flash or modify anything!
s7yler said:
Hi, I have talked with cuoco92 (known ROM cooker) and he told me the reason for these bricks and how we maybe can unbrick them. For that we need the file emmc_appsboot.mbn from the LeTV X800 US version. Unfortunately there is nowhere to download the US firmware, and it seems that LeTV will also not help to share it. So that's why the only way is if someone is going to extract it from a working LeTV X800 US version.
The reason why the QFIL method doesn't work is that the firmwares files are only for the Chinese version, and that will not work on the US version. So the method will always fail. Actually I got a step further with the QPST/QFIL connection where it actually succeeded in connecting to the Sahara protocol, saying "Sahara protocol completed" and "Switch To FireHose" ** All is well ** SUCCESS!! but it all ended up with another error as it later again couldn't connect to the port, and I got Download Fail:FireHose Fail FHLoader Fail: Proess fail....
The reason for the brick in the first place is that all the guides on how to install TWRP etc. on the net are made for the Chinese LeTV X800, if someone tries it on the LeTV X800 US version it will end up bricking the phone completely. So beware if the guides doesn't specific say that it also works on the US version then don't try to flash or modify anything!
Click to expand...
Click to collapse
OK, thanks for this Info. I will get my new LETV One Pro 01.06 or 02.06. I ordered it via efox-shop.com. And when I look at the images on their web site, i see a CE sign at the back. So if it is a US version and some could tell me how to extract this file without bricking it, I can do the extraction of this file "emmc_appsboot.mbn"...
Please note I had no issues flashing TWRP via fastboot, flashing supersu and xposed zips from TWRP and using xposed modules. Problems rise flashing ROMs since both official LeTV and custom ones have a firmware-update folder inside, I think if you delete that folder from zip you can flash ROMs just fine. On my HTC One m7, custom ROMs never have that folder.
EDIT: confirmed just now, erasing that "firmware-update" folder in the zip and flashing it you won't brick.
Inviato dal mio HTC One utilizzando Tapatalk
Same problem
Hi guys! I also bought my x800 via e-fox and was able to brick it using the wrong rom. I found some files on androidbrick with no password needed to download. Do you think they'll work? I wish i could paste link to the files but I can't since this is my first post on xda
Same problem here. Tried to flash the cuoco92 twrp recovery and got the penguin screen. I solved flashing the original twrp. After I tried to flash cuoco 92 rom but got the Black screen.
peppebi said:
Same problem here. Tried to flash the cuoco92 twrp recovery and got the penguin screen. I solved flashing the original twrp. After I tried to flash cuoco 92 rom but got the Black screen.
Click to expand...
Click to collapse
Which TWRP and ROM did you have installed?
Inviato dal mio Le X820 utilizzando Tapatalk
Cuoco92 said:
Which TWRP and ROM did you have installed?
Inviato dal mio Le X820 utilizzando Tapatalk
Click to expand...
Click to collapse
Hello cuoco!
I wrote to you on facebook as well.
I tried the last ROM in your download page and the twrp download ed from the same page.
---------- Post added at 05:48 PM ---------- Previous post was at 05:47 PM ----------
I flashed the twrp 3.0.2 downloaded from twrp page and this worked but after I bricked the phone with your rom because i think my phone is us versione.
peppebi said:
Hello cuoco!
I wrote to you on facebook as well.
I tried the last ROM in your download page and the twrp download ed from the same page.
---------- Post added at 05:48 PM ---------- Previous post was at 05:47 PM ----------
I flashed the twrp 3.0.2 downloaded from twrp page and this worked but after I bricked the phone with your rom because i think my phone is us versione.
Click to expand...
Click to collapse
I've uploaded the 13S for US version right now. You have installed that one?
Inviato dal mio Le X820 utilizzando Tapatalk
No the chinese One since i believed my phone was chinese and the rom backup could help me in case of failure. I never imagined i would brick the phone. What Can i do now? Is there any fix? Thank you.
First flashed twrp 3.0.2. than your rom 10s, then the screen went Black. My phone is an us version.
We're all in the same boat guys, waiting for some miracle to happen... But since it's mostly in LeEco/LeTV US hands I won't hold my breath, they told that MAYBE and IN THE FUTURE they would provide some help to us, ill fated users.
Inviato dal mio One utilizzando Tapatalk
@teorouge: Can I have the link to the Chinese FW you installed that bricked the phone? I have an extra device that I'm going to brick (already made a backup.img and have a US version prog_emmc_firehose_8994_lite.mbn), so I can try to help you guys. Let me know roughly the procedure (ex. Installed TWRP 3.0.2.0, transferred ZIP, installed, etc.).
viperdream26 said:
@teorouge: Can I have the link to the Chinese FW you installed that bricked the phone? I have an extra device that I'm going to brick (already made a backup.img and have a US version prog_emmc_firehose_8994_lite.mbn), so I can try to help you guys. Let me know roughly the procedure (ex. Installed TWRP 3.0.2.0, transferred ZIP, installed, etc.).
Click to expand...
Click to collapse
@viperdream26: I think it was .013S version from http://bbs.le.com/zt/eui/le_pro1.html I got TWRP 3.0.2 via fastboot flash recovery recovery.img, flashed SuperSu and Xposed zips and used the phone for a couple of days with no issues. The I decided to flash, I went into recovery and flashed the ROM zip but as soon as TWRP ended the process it didn't reboot as it usually does and screen went black, not to light up anymore in any way. Tried long pressing power (more than a minute each time...) and any volume button together but nothing happens. Finally tried QFIL way (and also letv_flash_tool.exe and any flasher out there) but I either get an error while flashing ("Device is not in firehose mode" in QFIL) or I miss some file to launch the process (with MiFlash and such). Thanks for any help you can give, just ask if you need more background!
@viperdream:
Thank you!
I had the .011 us version (but I didn't know my phone was US). I tried to install Cuoco92 TWRP 3.0.2 with the adb tool provided but when the phone reboot I got a black screen with a penguin. So I went on the official TWRP page and followed the procedure to install TWRP via ADB. It worked. After this I made a rom backup (including efs and everything else), wiped and installed Cuoco92 .013 rom and got the black screen.
peppebi said:
@viperdream:
Thank you!
I had the .011 us version (but I didn't know my phone was US). I tried to install Cuoco92 TWRP 3.0.2 with the adb tool provided but when the phone reboot I got a black screen with a penguin. So I went on the official TWRP page and followed the procedure to install TWRP via ADB. It worked. After this I made a rom backup (including efs and everything else), wiped and installed Cuoco92 .013 rom and got the black screen.
Click to expand...
Click to collapse
I got my LeTV One Pro yesterday. I wanted to install TWRP 3.0.2 only via the ADB procedure.
1. Downloaded the TEAMWin Code Name: x1 TWRP.img 3.0.2
2. adb reboot bootloader (Phone rebooted into the pinguin mode)
3. Then I wanted to execute the next command: fastboot flash recovery twrp.img: But the phone automatical reboots out of the Pinguin mode.
It stays there after the first adb command for approx: 3-5sec. before rebooting into normal mode.
So no chance to execute the described 2nd adb command to flash the recovery twrp image.
any ideas ?
BTW: My phone was delivered with a kind of international EUI 5.5.011S(Stable) OS and I could also select German as Default Language. Google Play Store and Apps were already installed. Android Version is 5.0.2. It seems thatz the describe procedures on the web are not functioning with this device. The OS has also no OTP Software Update menu, but I see with ES Explorer a inside the emulated storage folder 0 a log named "last_ota.log".
Did you try switching off your phone and turning it on long pressing power+ vol up to boot in bootloader? Or maybe it was vol down, sorry I bricked and I can't remember exactly which combination boots to recovery and which one to bootloader.
Inviato dal mio HTC One utilizzando Tapatalk
I was Trying to Flash Cyanogenmod 13 ROM on Zenfone 2 ZE551ML through a Video on youtube,According to the Video I Rooted my Device , Unlocked Boot-loader , Downloaded Cyanogenmod ROM , Downloaded Gaaps, Fastboot , TWRP Recovery and Every other thing required, as later on as per the video , I got to the TWRP Recovery Mode ,then according to the video, I took backup of my earlier rom(ZENUI ROM) ,and then Wiped the Data(Dalvik Cache , data ,etc) and then When I Tried to Flash That Cyanogenmod Rom- the Error Showed up(ERROR EXECUTING UPDATER BINARY IN ZIP) , But the device in Video Flashed the Rom Successfully, I Tried again to Flash that Rom But still Ended up with the Same Error , then I tried to Flash my Original ROM Backup , But this time too it showed Error, I thought that the Cyanogenmod rom i download was Corrupt , so i downloaded the another rom and tried to flash that but no use !! :crying:
Now what To Do, i Rebooted the Device, it Stucked on the ASUS Logo
AnyOne Please Help!!!
Jatinnm said:
I was Trying to Flash Cyanogenmod 13 ROM on Zenfone 2 ZE551ML through a Video on youtube,According to the Video I Rooted my Device , Unlocked Boot-loader , Downloaded Cyanogenmod ROM , Downloaded Gaaps, Fastboot , TWRP Recovery and Every other thing required, as later on as per the video , I got to the TWRP Recovery Mode ,then according to the video, I took backup of my earlier rom(ZENUI ROM) ,and then Wiped the Data(Dalvik Cache , data ,etc) and then When I Tried to Flash That Cyanogenmod Rom- the Error Showed up(ERROR EXECUTING UPDATER BINARY IN ZIP) , But the device in Video Flashed the Rom Successfully, I Tried again to Flash that Rom But still Ended up with the Same Error , then I tried to Flash my Original ROM Backup , But this time too it showed Error, I thought that the Cyanogenmod rom i download was Corrupt , so i downloaded the another rom and tried to flash that but no use !! :crying:
Now what To Do, i Rebooted the Device, it Stucked on the ASUS Logo
Click to expand...
Click to collapse
ANYONE Please Help!! :fingers-crossed:
Jatinnm said:
ANYONE Please Help!! :fingers-crossed:
Click to expand...
Click to collapse
if you have backup of your rom just go in twrp> restore and find your backup and restore, if that doesnt work then download original rom, download windroid toolkit, go to twrp>advanced and do adb sideload from windroid
ElmirBuljubasic said:
if you have backup of your rom just go in twrp> restore and find your backup and restore, if that doesnt work then download original rom, download windroid toolkit, go to twrp>advanced and do adb sideload from windroid
Click to expand...
Click to collapse
I think he downloaded a corrupted zip file. So, just download a correct zip, put it it sdcard and flash it. Relax, drink a coffee.
Forgot to mention
ElmirBuljubasic said:
if you have backup of your rom just go in twrp> restore and find your backup and restore, if that doesnt work then download original rom, download windroid toolkit, go to twrp>advanced and do adb sideload from windroid
Click to expand...
Click to collapse
Sorry I forgot to mention that TWRP recovery is also not working (opening) since i tried to flash another rom , it only gets to the bootloader mode where there areoptions for which mode i have to go for ( like recovery mode , bootloader mode , normal boot, etc), is there any other way to flash the original rom( i have downloaded original zenfone 2 ze5511ml firmware fron the asus website) , please anyone Help
Just flash stock recovery from bootloader and boot in it then go adb sideload
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
ElmirBuljubasic said:
Just flash stock recovery from bootloader and boot in it then go adb sideload
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Click to expand...
Click to collapse
but how can i do it I don't know that much, is there any video tutorial on youtube for that ??
What was your build before flashing the rom? If .184 then download this >https://mega.nz/#!edpFlZIY!Zx0sEoMAGnqPSq760QXdzxgfLATO1Ku5IsuI9z7-A6E open windroid and go to second tab e Press flash recovery then chose the img file and flash (when you are in bootloader mode) then reboot in recovery
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
---------- Post added at 09:41 PM ---------- Previous post was at 09:40 PM ----------
Also i suggest you to NOT wipe the data from stock recovery, just do adb sideload and from same interface from windroid(second tab) Press adb sideload and then select the stock rom, it will take time ( for me it took like 30 minutes to finish!!) Dont unplug for any reason
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk