Fails to make Roth device via Odin (n9005) ...
Drivers installed on the computer, I plugged the device in and I download the tar file in pda cwm and pressed start. The process starts and stops in conecting device and goes away.
What do you do in this situation?
I would suggest:
Try a new USB Cable
Try a new USB Port
Try a different computer
Try a different root method
Edit: removed
Sent from my SM-N900V using Tapatalk
Related
I lost recovery on my phone and when I try and boot my phone, it says "system software not authorized by att."
I'm trying to ODIN my phone back to stock but I can't see my phone when I open ODIN and put my phone in download mode. does anyone know of any fixes for this?
Try different USB port or different cable.
You might have to try a different computer. I can't for the life of me get my pc to recognize my device. But I have no problem on my laptop
Sent from my Nexus 5
Thanks guys. I found out that I had to restart my computer after installing the drivers and then it detected it with no problems!
Hello,
I was running Fenny's Stock Rom 4.2 on my S4 i9505 I was going good and then i flashed Stock 4.3 using mobile odin pro.
Now S4 is stuck at Samsung Galaxy S4 GT-I9505 Screen.
worst than that my laptop was not detecting the phone through USB cable. When i used to connect the cable with my phone it was not asking for any connection mode option in the notification.
Now I guess I can't flash it through odin using PC
Any other way out? How can i fix this?
Waiting for advices and suggestions .....
You do know you have to boot the phone into download mode in order to flash roms with Odin on the PC, right?Use the original cable and try different usb ports.
Or, if you had a custom recovery, does it work anymore?
Thanks for your response,
Yes i am in download mode waiting for odin to make me smile ... But nothing..
No costum recovery everything went back tu stock thats why i am stuck now ��
Then try the cable and usb port thing. It's mostly caused by those.
Tried 4 different ports and two cables, my other samsung phone can talk to my pc using same port and cable ��
So is this means my phone's port is not working for data transfer? even though it is charging my cell phone.
Power Button+Home Button+Volume Down Button
Sent from my SM-A500F using XDA Forums
That ll take me to download mode and its if no use as i wrote above my cell is not being detected by odin/pc..
Try reinstalling usb drivers
or
another PC
it worked FOR me
Tried windows 7 and then 8 and mac book still no luck
You might have to take it to repair center and have them reinstall the software. They have tools that we simple mortals don't
it was was the hardware issue infact the charging port was having it Rx/Tx Pin faulty as per the lap guy in my area. He replaced the strip for it and now I can flash any thing using odin
My Note 4 is n910cq with Exynos and I downloaded Android 6 from an xda thread and while I try to flash it through odin I got an error. After that the phone stuck with a screen says"firmware upgrade encountered an issue please select recovery mode ın kies and try again". I can put the phone into download mode but not able to get it to recovery mode. I tried to flash older roms but still keep getting error in odin. I tried Samsung smart switch app through upgrade section but no result. So, what to do?
it happens to me also because the phone disconnects while flashing , so you need to change the usb port ..keep trying to place it in a different usb port or even try to change the usb cable
tareqjordan said:
it happens to me also because the phone disconnects while flashing , so you need to change the usb port ..keep trying to place it in a different usb port or even try to change the usb cable
Click to expand...
Click to collapse
Thanks a lot. I changed the cable and PC and works good.
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
loche37 said:
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
Click to expand...
Click to collapse
Try disabling and enabling USB debugging while the phone is connected.
GDReaper said:
Try disabling and enabling USB debugging while the phone is connected.
Click to expand...
Click to collapse
Thanks for your reply, i've tried this many times, even when typing "adb devices", adb can't find my phone and it doesn't appaer in windows Device manager
loche37 said:
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
Click to expand...
Click to collapse
I have the exact same probleme... Odin work but no mtp....Have you found a solution ?
Need help. The USB cable was accidentally removed on my computer while flashing stock rom using odin. Odin can't find my Note 3 after Failed stock rom installation. Even my PC couldn't recognize my device. Anyone experienced this?
Try using a different USB cable and different USB 2.0 port.