I recieved an OTA Update for my P605
Buildnummer: JSS15J.P605XXUBMJ9
AP: P605XXUBMJ9
CP: P605XXUBMJ4
CSC: P605DBTBMJ1
The changelog says only, that they improve the stability.
I notice, that a bug with activ mobile data and wifi is gone.
Greetz
I got that OTA, too for my rooted device with reset status Official with Wanam xposed. Root was lost during the OTA, but as the full firmware is available at sammobile, I should be able to reroot this evening.
Erstellt mit meinem Note 10.1 2014 LTE
akxak said:
I got that OTA, too for my rooted device with reset status Official with Wanam xposed. Root was lost during the OTA, but as the full firmware is available at sammobile, I should be able to reroot this evening.
Erstellt mit meinem Note 10.1 2014 LTE
Click to expand...
Click to collapse
I rooted with no probs after installing MJ9. Sadly, according to SamMobile, no region or country has received any newer updates than MJ9. Most regions have received MJ9 now, though. We still wait for the multi-user enabling and lag reducing update which is out for the p600 (MK1)
Related
Hi everyone
I wanted to ask you a question.
In short: Are Kies and OTA are connected? I mean if Kies reports it doesn't support my firmware so I won't get OTAs too?
Detailed: I flashed two weeks ago the German stock rom DBT for I9505 (MJ5).
The reason I did that is because I couldn't get updates via Kies with the last firmware, I had:
PDA: ME2, PHONE: ME2, CSC: MDB(BTU)
I understood ME2 stands for Nordic countries and the product code (BTU) is for England so I couldn't get updates through Kies.
I flashed the German stock rom via Odin and all went OK but afterwards when I connected the device to Kies I still had BTU in CSC:
PDA: MJ5, PHONE: MJ5, CSC: MJ5(BTU)
My question is why is it like that? Wasn't the CSC supposed to change to DBT?
And so the main question: Will this interfere me to get OTA updates from Germany when they will be out? Because Kies still keeps saying that it doesn't support my firmware.
Thanks in advance
Meyhemg said:
Hi everyone
I wanted to ask you a question.
In short: Are Kies and OTA are connected? I mean if Kies reports it doesn't support my firmware so I won't get OTAs too?
Detailed: I flashed two weeks ago the German stock rom DBT for I9505 (MJ5).
The reason I did that is because I couldn't get updates via Kies with the last firmware, I had:
PDA: ME2, PHONE: ME2, CSC: MDB(BTU)
I understood ME2 stands for Nordic countries and the product code (BTU) is for England so I couldn't get updates through Kies.
I flashed the German stock rom via Odin and all went OK but afterwards when I connected the device to Kies I still had BTU in CSC:
PDA: MJ5, PHONE: MJ5, CSC: MJ5(BTU)
My question is why is it like that? Wasn't the CSC supposed to change to DBT?
And so the main question: Will this interfere me to get OTA updates from Germany when they will be out? Because Kies still keeps saying that it doesn't support my firmware.
Thanks in advance
Click to expand...
Click to collapse
After flashing MJ5 you made root, right?
jaswinky said:
After flashing MJ5 you made root, right?
Click to expand...
Click to collapse
No, I didn't root it and didn't do anything. So why?
Meyhemg said:
No, I didn't root it and didn't do anything. So why?
Click to expand...
Click to collapse
I have the same, cant go back to XEF
a40 said:
I have the same, cant go back to XEF
Click to expand...
Click to collapse
So my question is will I be able to get OTA with that CSC doesn't match PDA and PHONE?
Meyhemg said:
So my question is will I be able to get OTA with that CSC doesn't match PDA and PHONE?
Click to expand...
Click to collapse
No we need same pda and csc...
Meyhemg said:
No, I didn't root it and didn't do anything. So why?
Click to expand...
Click to collapse
I mean, when I updated to JB4.3 from 4.2.2 and rooted my phone, The knox counter incresed to 0x1; this was the reason I allways have thought OTA and kies updates notifications will never work again.
Anyway, In my case I can no more update by OTA or kies because I rooted the phone in 4.3 (or better, because of the knox counter increasing), but for buckups and so on I can use it normally, except I had to download kies version 3, the only kies version compatible with S4 JB 4.3, maybe you still have kies version 2.
Hi there,
i just got notified that there is a new firmware available. According to sammobile.com its Germany 2013 November 4.3 N9005XXUDMJ7 N9005DBTDMJ4.
Is there any changelog? on the device it only say stability improvements...well typical samsung.
I am on a rooted n9005 and do i lose root after i do that firmware upgrade?
Has anybody tried it yet?
I posed the question to Samsung Mobile UK on their facebook page
No surprise as to the non-committal reply but if anyone else would like to join in it's at
https://www.facebook.com/SamsungMob...ffset=0&total_comments=1¬if_t=feed_comment
Ok I caved in. Applied Spanish 4.4.2 update, seems good so far
Upgrade to KitKat NOTE 10.1 (2014) SM-P600
planetf1 said:
Ok I caved in. Applied Spanish 4.4.2 update, seems good so far
Click to expand...
Click to collapse
Hi there I am from Portugal, so the firmware is 4.3 P600XXUBMJ6 - NOTE 10.1 - 2014 (Wi Fi) SM-P600
So i would like to update to KitKat because of the multi user option (isn't present in 4.3)and to upgrade to KitKat, but i've read a little about the KNOX thing and i'm affraid to do something wrong... I've done it before many time with my Galaxy S2, with odin and custom roms.
If i update to the same firmware from Spain it will trigger the KNOX to 0x1? It is possible also to downgrade to 4.3 or it will be upgraded in the future?
Thanks for your help!
Regards,
Ricardo
I have a rooted samsung galaxy note 3 sm-n900p software n900pvpucnc5 running os 4.4.2 the root was done by a friend who moved to another city now I cant get the update android 4.4.4 there is no custom rom install still stock and ver twrp 2.7.0.1 how can i update to 4.4.4 and is it worth the bother
gtuck1002 said:
I have a rooted samsung galaxy note 3 sm-n900p software n900pvpucnc5 running os 4.4.2 the root was done by a friend who moved to another city now I cant get the update android 4.4.4 there is no custom rom install still stock and ver twrp 2.7.0.1 how can i update to 4.4.4 and is it worth the bother
Click to expand...
Click to collapse
4.4.4 is not out yet
My wife note 3 was ota updated a week ago with 4.4.4
Android 4.4.4 is available for N900P
gtuck1002 said:
My wife note 3 was ota updated a week ago with 4.4.4
Click to expand...
Click to collapse
@gtuck1002 As mentioned by "xinfinityoO", Android 4.4.4 is not yet out for Galaxy note 3 global version like N9005 and N900.
but its available for N900P, Here is the Url for 4.4.4 firmware.
SAMSUNG OFFICIAL FIRMWARE LINK FOR SM-N900P
And you are not able to update because You have installed Custom recovery "twrp" so your knox counter might have been triggered to 0x1, and device status changed to "Custom". That's the reason your cellphone won't get updated.
So if you want to update to 4.4.4 then jus download the firmware and install through ODIN. But you will lose your root if you update to 4.4.4.
Thanks.
Hit THANKS button, If I helped You.
I have an unrooted SM-N910G purchased directly from Samsung in Singapore
The last update I received was 5.0.1
N910GDTU1BOC7
3.10.40-5042088
Build LRX22C_N910GDTU1BOF1
I heard that newer versions would be rolled-out, but whenever i have the system check,
it tells me this is the last upgrade.
can someone tell me whether I am doing something wrong?
The roll out for Marshmallow has just recently begun. Some countries have received the update for Marshmallow eariler than some. The speed of the firmware update release depends on where you purchased your device. I am still waiting for the OTA Marshmallow firmware update for my UAE N910C. Just be patient, I'm sure you will get it soon.
No matter what Singapore CSC is selected, all of them got the latest 5.1.1 update in december, 2015:
XSP, MM1
sejtam said:
I have an unrooted SM-N910G purchased directly from Samsung in Singapore
The last update I received was 5.0.1
N910GDTU1BOC7
3.10.40-5042088
Build LRX22C_N910GDTU1BOF1
I heard that newer versions would be rolled-out, but whenever i have the system check,
it tells me this is the last upgrade.
can someone tell me whether I am doing something wrong?
Click to expand...
Click to collapse
Download Phone info app,check ur CSC and download FW from sammobile(or live.samsung-updates)..Than flash via ODIN and u done
Njoy