Thanks to @spyke555 for his backup copy of the Rogers version of the SGH-I257M firmware. I managed to root it with vroot, so there is a chinese version of SU on there but it works. I also stuck busy box on it and tried to get rid of most of Rogers apps.
Now to use this, you must stick it into your backup folder (i.e: clockworkmod/backup) it is NOT a flashable rom, it is a backup. If anyone wants to turn it into a flash rom, or create custom roms out of it, please do. Need to see some I257M roms popping up.
Dropbox
Box.com
G Drive
We also have @dsavard copy of the stock firmware from Koodo, which you can flash with Odin
Dropbox
Mirror 1
And here we have all of the STOCK and UNROOTED firmware for the Canadian I257M over at Sammobile
All vroot does is give root access without changing the rom. It uses the chinese program Superuser 1.0.4. You can get rid of this by following these steps:
Go to play store and install SuperSU.
Start SuperSU and you will be asked for permission by Superuser 1.0.4, choose 允许(means allow). (Should be the right side option.)
SuperSU will prompt to install SU binary, go ahead with OK and it will display successful.
Now, freeze Superuser 1.0.4 in titanium backup, just in case you need it again.
Note: If you uninstall straight away from app manager, you need to make sure SuperSU updated the binary.
Re-run SuperSU to make sure everything is alright. You will be prompt again to install SU binary, just do what it asked.
After that, you are rooted with SuperSU and Superuser 1.0.4 will not be there anymore.
Once you do that, SuperSU will be the default and will be in english.
Good to see this here. I just picked up my S4 Mini today. I'm from Canada so I'm assuming it's a slightly different version than the other models? Cause mine in an SGH-1257M. Is it a different process to root it?
I'm not too familiar with vroot. My last phone was an HTC Evo 3D.
Skyty said:
Good to see this here. I just picked up my S4 Mini today. I'm from Canada so I'm assuming it's a slightly different version than the other models? Cause mine in an SGH-1257M. Is it a different process to root it?
I'm not too familiar with vroot. My last phone was an HTC Evo 3D.
Click to expand...
Click to collapse
vroot is like SRS or any other one touch root program, but it's in chinese. Easy to use and has a high success rate for most phones. the I257M is slightly different from what we can tell from the other models; different features. As far as I can tell there isn't a different way to root this but I'm not to sure how the others were rooted. I also don't know if there is anything different between the Bell, Rogers, Fido, etc. versions besides their own bloatware. I hope I can get all the different versions uploaded.
Omega2513 said:
vroot is like SRS or any other one touch root program, but it's in chinese. Easy to use and has a high success rate for most phones. the I257M is slightly different from what we can tell from the other models; different features. As far as I can tell there isn't a different way to root this but I'm not to sure how the others were rooted. I also don't know if there is anything different between the Bell, Rogers, Fido, etc. versions besides their own bloatware. I hope I can get all the different versions uploaded.
Click to expand...
Click to collapse
Yeah, I have a Rogers phone. Just got it yesterday.
Is there a guide on here how to root with vroot? I'm not too good at rooting and whatnot. I've only done it once on my Evo 3D and that was more than a year a go haha!
Just google it. The vroot forum has step by step with pictures
Sent from my SGH-I257M disguised as a GT-I9195
hey can someone help me?
i have a telus version and i would like to back mine up and post an image for you guys. we can then update the first post with the different carrier versions if we ever need to go back to stock for warranty purposes. i'd also like to see if there are different files from the carriers.
Omega2513 said:
Just google it. The vroot forum has step by step with pictures
Sent from my SGH-I257M disguised as a GT-I9195
Click to expand...
Click to collapse
Will do!
Edit: So I found this post:
http://forum.xda-developers.com/showthread.php?t=2455822
It mentions select the drivers for your phone? Is the S4 Mini supported?
infamouskid said:
hey can someone help me?
i have a telus version and i would like to back mine up and post an image for you guys. we can then update the first post with the different carrier versions if we ever need to go back to stock for warranty purposes. i'd also like to see if there are different files from the carriers.
Click to expand...
Click to collapse
There are forums here on how to temporarily give root and install CMW to make a backup.
Well, I just rooted my phone using VROOT. It is still recognized as an SGH-I257M. However, when any of my apps update it's all in Mandarin (I think?). Would I simply use the backup you posted? Would that solve that issue?
Will the I9195 roms work with phone even though I didn't root it as a I9195?
Skyty said:
Well, I just rooted my phone using VROOT. It is still recognized as an SGH-I257M. However, when any of my apps update it's all in Mandarin (I think?). Would I simply use the backup you posted? Would that solve that issue?
Will the I9195 roms work with phone even though I didn't root it as a I9195?
Click to expand...
Click to collapse
All vroot does is give root access without changing the rom. It uses the chinese program Superuser 1.0.4. You can get rid of this by following these steps:
Go to play store and install SuperSU.
Start SuperSU and you will be asked for permission by Superuser 1.0.4, choose 允许(means allow). (Should be the right side option.)
SuperSU will prompt to install SU binary, go ahead with OK and it will display successful.
Now, freeze Superuser 1.0.4 in titanium backup, just in case you need it again.
Note: If you uninstall straight away from app manager, you need to make sure SuperSU updated the binary.
Re-run SuperSU to make sure everything is alright. You will be prompt again to install SU binary, just do what it asked.
After that, you are rooted with SuperSU and Superuser 1.0.4 will not be there anymore.
Once you do that, SuperSU will be the default and will be in english.
You can use the backup that I posted but it would be the same as your stock rom. The backup is just for those who don't want to root their own rom, doesn't trust the program, etc. The I9195 roms will still work, but when you flash them, your phone will recognize itself as a GT-I9195 instead of SGH-I257M
Sorry for bumping this, but I wanted to ask, did you have any trouble installing CWM after you rooted with VROOT?
It keeps telling me that SGH-I257M is unsupported.
What I did was use the I9195 rooting method to get CWM installed then switch back with I257M backup. It turns your phone back to I257M but CWM stays installed. You could also try installing twrp
Sent from my SGH-I257M disguised as a GT-I9195
Omega2513 said:
What I did was use the I9195 rooting method to get CWM installed then switch back with I257M backup. It turns your phone back to I257M but CWM stays installed. You could also try installing twrp
Sent from my SGH-I257M disguised as a GT-I9195
Click to expand...
Click to collapse
Ah... that's why I'm having issues. I'll look into TWRP.
Edit: Just tried TWRP. No luck.
It wouldn't backup my ROM. Just booted me into recovery with no option of backing up.
Edit #2:
Slowly figuring this out. I unrooted my phone and re-rooted with the I9195 method. I now have CWM.
What I think it is, the I9195 method unlocks the bootloader where just rooting the I257M doesn't do that
Sent from my SGH-I257M disguised as a GT-I9195
Be warned, VRoot and Kingo rooting methods have been temporarily banned from XDA forums. All links to the software have been removed from the posts.
During the rooting process, they collects sensitive data like IMEI and send it to remote servers. XDA moderators are currently investigating the issue to determine if it was done with bad intention or not.
For more information, check this thread : http://forum.xda-developers.com/showthread.php?t=2516942
dsavard said:
Be warned, VRoot and Kingo rooting methods have been temporarily banned from XDA forums. All links to the software have been removed from the posts.
During the rooting process, they collects sensitive data like IMEI and send it to remote servers. XDA moderators are currently investigating the issue to determine if it was done with bad intention or not.
For more information, check this thread : http://forum.xda-developers.com/showthread.php?t=2516942
Click to expand...
Click to collapse
Hmm... good to know... thanks!
I unrooted my phone and re-rooted via the I9195 so I could get CWM. Hopefully it removed anything that VROOT left.
dsavard said:
Be warned, VRoot and Kingo rooting methods have been temporarily banned from XDA forums. All links to the software have been removed from the posts.
During the rooting process, they collects sensitive data like IMEI and send it to remote servers. XDA moderators are currently investigating the issue to determine if it was done with bad intention or not.
For more information, check this thread : http://forum.xda-developers.com/showthread.php?t=2516942
Click to expand...
Click to collapse
Thanks for the info. I didn't realize that was possible
@Omega2513 As a safer alternative, why not install the S4Mini_RootKit_v1.zip from arco68 (http://forum.xda-developers.com/showthread.php?t=2364980) from CWM Recovery ? It is the same for all s4 mini (I9190, I9192 and I9195), so I suppose it will work for the SGH-I257M too.
It's possible it could work. Never tried it, but since it does the other models, I don't see why not.
Sent from my SGH-I257M disguised as a GT-I9195
I've got a backup of the latest Koodo SGH-I257M stock firmware [MK5 (KDO)]) by following this recipe:
http://forum.xda-developers.com/showthread.php?p=23188887
I've uploaded it online for anyone who could need it :
[EDIT: Download not available anymore. Anyway the firmware is now available on Sammobile.]
It seems to be in the same format than firmwares found on the sammobile web site. So, it could be useful for those who wish to revert to stock with Odin... and know how to do it.
Related
I rooted my device with Kingo Android root. I am currently running android OS 4.3.
Everything was going just fine until just today when opened SuperSU and it told me that there is no SU binary installed. SuperSU cannot install it.
Pretty much I need to manually re-root my device.
I am not aware of any recovery files that I may have. To clarify, I have never backed up my device in any way. I have only had it for a month, and there is hardly anything on it. I figured, why bother? Well now I know.
I have done quite a few google searches about this, and I can not find any help.
What is my best course of action?
Thank you very much.
Try reflash and re-root with cf-auto root through Odin. A a small question: u still have root right to install some app such root explorer and titanium backup?
Sent from my SM-N9005 using XDA Premium 4 mobile app
hhai2pth said:
Try reflash and re-root with cf-auto root through Odin. A a small question: u still have root right to install some app such root explorer and titanium backup?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unfortunatly, I no longer have root. None of my root apps can get root permissions because the SU binary is missing.
I tried flashing my firmware, but now my phone is stuck in an unusable state. The official firmware leaves me unable to boot with a "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
When I flash a different ROM on top of that one, all my spen stuff is messed up.
This is way different from jailbreaking. There are so many rom files I have a hard time finding the one I need.
SM-900A in case anyone wants my number.
DrShenanigan said:
Unfortunatly, I no longer have root. None of my root apps can get root permissions because the SU binary is missing.
I tried flashing my firmware, but now my phone is stuck in an unusable state. The official firmware leaves me unable to boot with a "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
When I flash a different ROM on top of that one, all my spen stuff is messed up.
This is way different from jailbreaking. There are so many rom files I have a hard time finding the one I need.
SM-900A in case anyone wants my number.
Click to expand...
Click to collapse
You need to go on sammobile and download your stock firmware (you probably want to stay on 4.3 unless your particular phone and carrier have root capabilities on 4.4.2 which verizon and att do not yet have) then flash it through odin... just search your model # through sammobile and it will show all the available stock firmwares. That will at least get you running again then u will have to root it again from there
Posted from my beast of a VZW Note 3!!
I downloaded the firmware from that site and have tried to flash it.
I get an Error Meassage:
SW REV CHECK FAIL : [sb1]Fused 2 > Binary 1
DrShenanigan said:
I rooted my device with Kingo Android root. I am currently running android OS 4.3.
Everything was going just fine until just today when opened SuperSU and it told me that there is no SU binary installed. SuperSU cannot install it.
Pretty much I need to manually re-root my device.
I am not aware of any recovery files that I may have. To clarify, I have never backed up my device in any way. I have only had it for a month, and there is hardly anything on it. I figured, why bother? Well now I know.
I have done quite a few google searches about this, and I can not find any help.
What is my best course of action?
Thank you very much.
Click to expand...
Click to collapse
1st : I dunno ur device which version of note 3.
2nd : kingo sometimes for some device not working well. Try avoid to use this method. Try cf-autoroot instead. Easy nd simple, but knox will trip.
3rd : have u tried update to latest supersu?
3rd :
Sent from somewhere under the sky, at the vorner of this rounded earth.
antique_sonic said:
1st : I dunno ur device which version of note 3.
2nd : kingo sometimes for some device not working well. Try avoid to use this method. Try cf-autoroot instead. Easy nd simple, but knox will trip.
3rd : have u tried update to latest supersu?
3rd :
Sent from somewhere under the sky, at the vorner of this rounded earth.
Click to expand...
Click to collapse
Updating SuperSU is what cause this mess, I believe. It's too late for that now anyhow, because my phone does not boot.
I have the SM-900A. There is no cf-autoroot for it. Not that I canfind at least.
DrShenanigan said:
Updating SuperSU is what cause this mess, I believe. It's too late for that now anyhow, because my phone does not boot.
I have the SM-900A. There is no cf-autoroot for it. Not that I canfind at least.
Click to expand...
Click to collapse
Try this, mate
http://forum.xda-developers.com/showthread.php?t=2466423
I know outside of Att note 3 it hasn't been confirmed to work but wondering if anyone tried it on other note devices? Thanks.
Sent from my iPhone using Tapatalk
Used it installed safestrap and when it reboots get the unlock symbol on the boot screen
Sent from my SM-N900V using XDA Premium 4 mobile app
Works fine on my device. For the unlock symbol, download latest SU and updated binaries. That will go away.
Sent from my SM-N900V using Tapatalk
Definitely works for getting root. Rooted, installed SuperSU, Xposed, SafeStrap all successfully. Now struggling to get a rom to work (tried Eclipse & Hyperdrive). Both say they install successfully via SafeStrap and then hangs on boot up. I've seen one other post on the Eclipse thread for the same problem, so it might be something to keep an eye on.
i can verify that this method works. i just installed superuser and it works flawlessly. the only thing is make sure to download the superuser app from here so you have the updated binaries: http://download.chainfire.eu/447/SuperSU/UPDATE-SuperSU-v1.99r4.zip
re
i have root access verified w/root checker
downloaded v1.99r4.zip and installed it
when i open it it asks for me to update binary and it fails installation
any ideas or workarounds??
lazygregg said:
i have root access verified w/root checker
downloaded v1.99r4.zip and installed it
when i open it it asks for me to update binary and it fails installation
any ideas or workarounds??
Click to expand...
Click to collapse
Rerun towelroot
re
drewcam888 said:
Rerun towelroot
Click to expand...
Click to collapse
i've done that multiple times...
reran towelroot, it reboots phone..open supersu the version that i downloaded earlier from the website and try to download supersu binary and it fails
lazygregg said:
i've done that multiple times...
reran towelroot, it reboots phone..open supersu the version that i downloaded earlier from the website and try to download supersu binary and it fails
Click to expand...
Click to collapse
I seem to be in the same boat as well. Things I have tried and it still does not work:
Installed Play Store Edition
Installed 1.99r4
Installed 1.99r5
All of them are saying I need to update binaries. While I am technically rooted and can grant permissions to apps, I need to get into SuperSU so I can modify some settings.
There are several others have issues on Reddit as well, so its not a couple of people.
exaltedgod said:
I seem to be in the same boat as well. Things I have tried and it still does not work:
Installed Play Store Edition
Installed 1.99r4
Installed 1.99r5
All of them are saying I need to update binaries. While I am technically rooted and can grant permissions to apps, I need to get into SuperSU so I can modify some settings.
There are several others have issues on Reddit as well, so its not a couple of people.
Click to expand...
Click to collapse
Try this. Install safestrap 3.7x. Open it, give su permission, install recovery, hit the home button. Open supersu, update binary thru cwm/twrp. Don't click to reboot phone into recovery from supersu. Hold down home and bring safestrap back up. Reboot to recovery from there and it should update the binary. Hope this helps.
Sent from my SM-N900V using XDA Premium HD app
Dc4479 said:
Try this. Install safestrap 3.7x. Open it, give su permission, install recovery, hit the home button. Open supersu, update binary thru cwm/twrp. Don't click to reboot phone into recovery from supersu. Hold down home and bring safestrap back up. Reboot to recovery from there and it should update the binary. Hope this helps.
Click to expand...
Click to collapse
This is being very peculiar. After I installed Safe Strap, SuperSU went fine, able to get in and do what I needed to get done. I reboot into recovery. Made a backup, and rebooted system. Went right to SuperSU again. And the same issue occurs, constantly asking for updated binaries. I am trying everyone once more to make it all work. If not, then I will just stick with what I have and hopefully it doesn't cause any other issues.
Thank you for the help thus far. :good:
exaltedgod said:
This is being very peculiar. After I installed Safe Strap, SuperSU went fine, able to get in and do what I needed to get done. I reboot into recovery. Made a backup, and rebooted system. Went right to SuperSU again. And the same issue occurs, constantly asking for updated binaries. I am trying everyone once more to make it all work. If not, then I will just stick with what I have and hopefully it doesn't cause any other issues.
Thank you for the help thus far. :good:
Click to expand...
Click to collapse
Yeah I just did all this last night...I installed SafeStrap and installed Recovery, then went into SuperSU and clicked Normal when asking for updating Binaries and it hasnt asked again thankfully. All of this of course was after installing BusyBox from the Play Store.
Note though: Safestrap isnt working for flashing roms just yet, just like someone else said here, and someone else said this in the Jasmine Rom forum. I just tried it myself and everything looks fine when installing, but then when you boot up, screen goes black and unresponsive after the SS splash screen on a reboot. Hopefully we have an update to SS soon. Fair warning - make sure you create a backup of your System/Data, etc in SS before messing around...it makes it so much easier to restore in case something screws up.
pmt223 said:
Yeah I just did all this last night...I installed SafeStrap and installed Recovery, then went into SuperSU and clicked Normal when asking for updating Binaries and it hasnt asked again thankfully. All of this of course was after installing BusyBox from the Play Store.
Note though: Safestrap isnt working for flashing roms just yet, just like someone else said here, and someone else said this in the Jasmine Rom forum. I just tried it myself and everything looks fine when installing, but then when you boot up, screen goes black and unresponsive after the SS splash screen on a reboot. Hopefully we have an update to SS soon. Fair warning - make sure you create a backup of your System/Data, etc in SS before messing around...it makes it so much easier to restore in case something screws up.
Click to expand...
Click to collapse
So, can someone enlighten me on what this "root" does? I've been running SafeStrap 3.72 with HyperROM 8 and just yesterday, successfully installed Towelroot on my Verizon Note 3. I downloaded the new SU to my SDcard before running Towelroot and was able to run it immediately after root and all looks good. But... what did I actually gain? Can I now install Cyanogen or others? I am a bit fuzzy on the difference, if any, on a rooted phone vs. an unlocked bootloader. Those of us on the Verizon retail Note 3 still don't have unlocked bootloaders do we? I miss the ease of playing with my old S3! LOL. Thanks!
emtownsend said:
So, can someone enlighten me on what this "root" does? I've been running SafeStrap 3.72 with HyperROM 8 and just yesterday, successfully installed Towelroot on my Verizon Note 3. I downloaded the new SU to my SDcard before running Towelroot and was able to run it immediately after root and all looks good. But... what did I actually gain? Can I now install Cyanogen or others? I am a bit fuzzy on the difference, if any, on a rooted phone vs. an unlocked bootloader. Those of us on the Verizon retail Note 3 still don't have unlocked bootloaders do we? I miss the ease of playing with my old S3! LOL. Thanks!
Click to expand...
Click to collapse
No, you dont gain an unlocked bootlader. At this point, only the Almighty will make that happen lol. For us with Verizon Notes (and some others), this helps the folks who either a) dont want to use Kingo or the other web methods, and b) folks who were on stock 4.4.2 NC4, like from an OTA (like me). This now gave me root, where when the OTA came out people were fearing there would never be a root for it (thanks to everyone else who put monies towards a bounty). Many people as well as myself cannot use SafeStrap successfully to fully flash a rom yet (you'll see this remarked in a lot of places), so Im sure there is an update forthcoming. In the meantime, I can use TB and freeze/uninstall a lot of the bloatware crap, and use Xposed for whatever else, which is fine by me. But no, we are still a no-go on full rooting and unlocked bootladers like on some other phones, which means no CyanogenMod, etc.
pmt223 said:
No, you dont gain an unlocked bootlader. At this point, only the Almighty will make that happen lol. For us with Verizon Notes (and some others), this helps the folks who either a) dont want to use Kingo or the other web methods, and b) folks who were on stock 4.4.2 NC4, like from an OTA (like me). This now gave me root, where when the OTA came out people were fearing there would never be a root for it (thanks to everyone else who put monies towards a bounty). Many people as well as myself cannot use SafeStrap successfully to fully flash a rom yet (you'll see this remarked in a lot of places), so Im sure there is an update forthcoming. In the meantime, I can use TB and freeze/uninstall a lot of the bloatware crap, and use Xposed for whatever else, which is fine by me. But no, we are still a no-go on full rooting and unlocked bootladers like on some other phones, which means no CyanogenMod, etc.
Click to expand...
Click to collapse
Ah. Got it. Thanks!
* I successfully used SafeStrap to install HyperROM 8 on slot 1 only, so I had to lose my stock ROM, but I'm OK with that.
cnotes2019 said:
I know outside of Att note 3 it hasn't been confirmed to work but wondering if anyone tried it on other note devices? Thanks.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
i rooted today with towelroot. i have a verizon note 3 on 4.4.2
Hello,
Samsung Note 3
I REALLY want to root my phone to help test out the beta of f.lux. You can look it up if you want, should take you a a peachy orange page. Anyway, I really want that on my phone, and it needs root, and I've NEVER rooted a phone before, and I'm not sure what I'm doing.
I want to follow [this guide](http://www.phonearena.com/news/How-to-Root-the-Verizon-Samsung-Galaxy-Note-3_id48247) PhoneArena link, but it doesn't say what android version it needs, and that worries me.
One more thing, I downloaded a file called "fastboot" and it has something to do with ADB that disables certain apps so that I'm not nagged to update. I'm on 4.4.4, and I can't find that file, I think it's in the root of C:\ but I ran them and it didn't work. So if I could reenable those apps to get on lollipop or marshmallow, if rooting would be easier, I'd do that. I've searched the forum, but I need baby steps.
Thanks.
timpster said:
Hello,
Samsung Note 3
I REALLY want to root my phone to help test out the beta of f.lux. You can look it up if you want, should take you a a peachy orange page. Anyway, I really want that on my phone, and it needs root, and I've NEVER rooted a phone before, and I'm not sure what I'm doing.
I want to follow [this guide](http://www.phonearena.com/news/How-to-Root-the-Verizon-Samsung-Galaxy-Note-3_id48247) PhoneArena link, but it doesn't say what android version it needs, and that worries me.
One more thing, I downloaded a file called "fastboot" and it has something to do with ADB that disables certain apps so that I'm not nagged to update. I'm on 4.4.4, and I can't find that file, I think it's in the root of C:\ but I ran them and it didn't work. So if I could reenable those apps to get on lollipop or marshmallow, if rooting would be easier, I'd do that. I've searched the forum, but I need baby steps.
Thanks.
Click to expand...
Click to collapse
If you're just looking to try out f.lux you could give Cf.lumen a try first. It has a non-root mode.
If you want to root you can just flash a custom recovery like TWRP with Odin.
Sjant said:
If you're just looking to try out f.lux you could give Cf.lumen a try first. It has a non-root mode.
If you want to root you can just flash a custom recovery like TWRP with Odin.
Click to expand...
Click to collapse
You say, just flash, as if there is no risk. I want to get it right, no bricking. I'm on 900V (V for verizon), and I want a quick safe way to root. Also, thank you for mentioning Cf.lumen, I do have it, and the nonroot looks like ****, yes it works, but it's not remotely the same.
timpster said:
You say, just flash, as if there is no risk. I want to get it right, no bricking. I'm on 900V (V for verizon), and I want a quick safe way to root. Also, thank you for mentioning Cf.lumen, I do have it, and the nonroot looks like ****, yes it works, but it's not remotely the same.
Click to expand...
Click to collapse
I recommend visiting TWRP's website and pick out the latest version for your device and then flash the latest non-beta version of SuperSU which you can find here on XDA. Flash TWRP with Odin and then boot into recovery and simply reboot, it will then ask you if you'd like to root your device.
What model do you have? Find your model first then download TWRP recovery. Use odin to flash the recovery, then flash super su.
Odin - http://www.droidviews.com/download-odin-tool-for-samsung-galaxy-devices-all-versions/
Supersu - https://download.chainfire.eu/743/SuperSU/BETA-SuperSU-v2.52.zip
Complete edit.
O.K., so I see that TWRP has a backup option. If I use this option, and should I "brick" my phone, could I flash the TWRP in odin, and figure out how to restore the backup, and unbrick the phone if I screw up the root process? Because that would be ****ing amazing, and I'd root IMMEDIATELY if that's the case, because, no worries -- I'd always have a backup! I love backups.
You need Root for TWRP to backup .
Suggest you read the stickeid FAQS and guides .
timpster said:
Complete edit.
O.K., so I see that TWRP has a backup option. If I use this option, and should I "brick" my phone, could I flash the TWRP in odin, and figure out how to restore the backup, and unbrick the phone if I screw up the root process? Because that would be ****ing amazing, and I'd root IMMEDIATELY if that's the case, because, no worries -- I'd always have a backup! I love backups.
Click to expand...
Click to collapse
First things first, EXACTLY what Note 3 model do you have? Go to Settings -> About -> Device model. If it is SM-N9005, that would be quite surprising, because we didn't get a 4.4.4 build.
American Note 3s got a 4.4.4 build, N900A, N900V (AT&T Note 3 and Verizon Note 3 respecitevly), and the methods for rooting THEM has nothing in common with the way a N9005 or N900 is rooted.
900V. Verizon, 4.4.****ing4. I had .3 but it kept nagging me to update like trial software and that was probably the end of my chances as I recall I most likely have a locked bootloader so I may not be able to do any of this.
Why can't I make a full backup on stock android anyway, seems like the responsible thing to do.
Verizon then use the verizon forum anything from here is wrong and may brick your phone .
Full backup requires a modified recovery therefore no longer stock .
Ah so it's the stock recovery that is used. So why do you think that lacks options for a full backup?
When you say use Verizon forums is that a section here or a dedicated Verizon forum?
Hi Guys,
I received my unlocked 900F today, and have been prepping to do some work on it. Already downloaded Odin, USB drivers, etc, getting ready to backup, flash CWM Recovery. All looks pretty straight forward. A couple things I'm not sure about though...
Much to my surprise, its already rooted with Kingroot present on the system. Cant say I'm real fond of it, is it wise to replace it with a 'normal' SU setup? Any caveats?
Second thing, is that the system is saying there is an update available. Is this wise, or do I risk messing up root, or anything else?
Thanks for any suggestions, advice, info.
K
KetoSoi said:
Hi Guys,
I received my unlocked 900F today, and have been prepping to do some work on it. Already downloaded Odin, USB drivers, etc, getting ready to backup, flash CWM Recovery. All looks pretty straight forward. A couple things I'm not sure about though...
Much to my surprise, its already rooted with Kingroot present on the system. Cant say I'm real fond of it, is it wise to replace it with a 'normal' SU setup? Any caveats?
Second thing, is that the system is saying there is an update available. Is this wise, or do I risk messing up root, or anything else?
Thanks for any suggestions, advice, info.
K
Click to expand...
Click to collapse
If your rooted updates won't install. Not sure what you want as an end result but if you want the latest Samsung official update then you will need to either use one of the latest debloated ROMs here in XDA development under S5 or download from Sam Mobile and use Odin to install. But personally I recommend either xXx or _Axelandr ROMs which are latest stock with root and other support. King root isn't the way to go because it doesn't use official super su. Also king root uses spyware... Not a great option. Also BACKUP YOUR EFS FOLDER NOW! DO IT! you'll only cry later when things go wrong. What model phone and firmware are you running now?!
RuffBuster said:
If your rooted updates won't install. Not sure what you want as an end result but if you want the latest Samsung official update then you will need to either use one of the latest debloated ROMs here in XDA development under S5 or download from Sam Mobile and use Odin to install. But personally I recommend either xXx or _Axelandr ROMs which are latest stock with root and other support. King root isn't the way to go because it doesn't use official super su. Also king root uses spyware... Not a great option. Also BACKUP YOUR EFS FOLDER NOW! DO IT! you'll only cry later when things go wrong. What model phone and firmware are you running now?!
Click to expand...
Click to collapse
Yeah, that was my concern. I didnt want to install the Samsung update if it will cause me root issues down the road. So best to NOT install it then?
I was surprised Kingroot came with the phone, what reading I did on it indicates its sketchy at best. Going to toss that quickly then.
At this point, my plan of attack is:
1. Flash CWM recovery.
2. Backup as it is now.
3. Backup EFS.
4. Remove Kingroot, install normal SU.
I'll start looking into other ROM's afterwards, when I have more time.
The phone is a SM-G900F, Build # LRX21T.G900FZHU1BOA1. Not sure if thats the firmware #, or something else. Nothing else jumps out at me.
Wondering if anyone in the know has heard of any development going on for this device? I recently bought one and it's not a bad phone for the price, but I've seen absolutely -nothing- on it anywhere online for the most part. It's barely root-able with what I've been able to find, and no custom recovery or really anything custom has popped up that I've seen.
Not sure if it's just that it's been only a few months since the phone came out, or if it's just not that great a phone. I upgraded from an HTC Desire 510 to this, and it was heavily customized/rooted/etc, and I want so badly to get back to where I was with it on this phone I cant stand it!
I also want to root my Galaxy J3! I just want to root it so I can use AdAway and Titanium Backup.
triiuzii said:
I also want to root my Galaxy J3! I just want to root it so I can use AdAway and Titanium Backup.
Click to expand...
Click to collapse
Right now rooting isn't the problem so much as keeping root. Because apparently the colonel has protection and will remove root whenever you reboot. That means things that require root on boot like backups, Xposed and a lot of other things won't work for us until someone complies a kernel with root protection removed. You can do some debloating and possibly the AdAway but that's about it right now.
*kernel. Damn voice to text.
That sucks. I upgraded from an LG Volt and I was able to do a whole bunch of stuff on it. The J3 is still very new, so hopefully development will happen soon.
I just got this phone if there is anything i can do to help move this along let me know. I have the virgin mobile one.
mallamike said:
I just got this phone if there is anything i can do to help move this along let me know. I have the virgin mobile one.
Click to expand...
Click to collapse
I guess that would depend on what you have experience with and what you can do. Thus-far root has been able to be achieved with Kingroot, though it wont stick through a power cycle (reboot/power off/etc), and using any of the methods available (at least that I'm aware of, only found two legitimate ones) to replace Kingroot with SuperSU (to facilitate having root stick past the reboot hopefully) causes a soft-brick every time forcing a re-flash of stock firmware through Odin.
At the very least make your voice heard, if nothing else hopefully more popularity will come this devices way and we'll see some development for it. My roommate is considering writing something for it, but it is a long process working solo, so anyone who has experience working with kernels or editing stock rom/writing custom roms feels up to helping out, shoot me a message and I'll get it over to him. He's a fairly experienced programmer and picks up what he doesn't already know pretty quickly.
Got one recently too. Would also appreciate any more information on rooting.
I have a J320A (AT&T) came stock with 6.0.1, can help test if needed
http://forum.xda-developers.com/android/development/recovery-teamwin-recovery-project-3-0-2-t3356616
I know this is an old thread, just making my rounds looking for anything on the J3 myself (SM-J320P Boost, Virgin, etc...) and have found TWRP & permanent root with Chainfire's SuperSU (system-less though). Everything is great except a lag issue with supersu. There is an exposed by wanum that works as well. Only app that has root issue so far is ES File Explorer. If anyone is still looking hope this helps.
zach
coolbeans2016 said:
http://forum.xda-developers.com/android/development/recovery-teamwin-recovery-project-3-0-2-t3356616
I know this is an old thread, just making my rounds looking for anything on the J3 myself (SM-J320P Boost, Virgin, etc...) and have found TWRP & permanent root with Chainfire's SuperSU (system-less though). Everything is great except a lag issue with supersu. There is an exposed by wanum that works as well. Only app that has root issue so far is ES File Explorer. If anyone is still looking hope this helps.
zach
Click to expand...
Click to collapse
Will this version of TWRP work on the Att variant running 6.0.1? Is there a way to root that device yet?
coolbeans2016 said:
http://forum.xda-developers.com/android/development/recovery-teamwin-recovery-project-3-0-2-t3356616
I know this is an old thread, just making my rounds looking for anything on the J3 myself (SM-J320P Boost, Virgin, etc...) and have found TWRP & permanent root with Chainfire's SuperSU (system-less though). Everything is great except a lag issue with supersu. There is an exposed by wanum that works as well. Only app that has root issue so far is ES File Explorer. If anyone is still looking hope this helps.
zach
Click to expand...
Click to collapse
Anything yet for J320A/Z models? (AT&T/cricket)
This version of TWRP won't work will it? Totally different phone?
EDIT: just realized the guy above has the same question... something tells me we won't see root on the ATT/cricket variants for a while.
TechShui said:
Anything yet for J320A/Z models? (AT&T/cricket)
This version of TWRP won't work will it? Totally different phone?
EDIT: just realized the guy above has the same question... something tells me we won't see root on the ATT/cricket variants for a while.
Click to expand...
Click to collapse
Try official TWRP of galaxy J2. Your variant shares the same specs as J2. Others also did this to galaxy On5, it works 100%.
what about the
SM-J320VPP = the verizon pre paid planversion. any working roots for me yet?
oh pretty pleeeeeez
Azhero said:
Try official TWRP of galaxy J2. Your variant shares the same specs as J2. Others also did this to galaxy On5, it works 100%.
Click to expand...
Click to collapse
So can you confirm this method works? Does OEM unlock setting in dev options unlock the bootloader on AT&T variant? If so couldn't I temp root and flash TWRP via Flashify?
AnierinB said:
So can you confirm this method works? Does OEM unlock setting in dev options unlock the bootloader on AT&T variant? If so couldn't I temp root and flash TWRP via Flashify?
Click to expand...
Click to collapse
It doesn't work tried it 3 times. I even tried other ones no luck. They locked this thing down. Im surprise chainfire haven't tried this phone yet.
Hi, guys! I understand it was an old thread, but I was referred here from Reddit. I have a Galaxy J3 (SM-J3109) purchased in Mainland China (Service provider is China Telecom). I rooted it with Kingo Root. Kingo Root stated that it successfully rooted the device, but the phone OS had given me warnings about unauthorized access to the device or something.
One week later (I did *not* reflash the phone nor install any applications after I rooted the phone) I found the phone stuck in an annoying bootloop. The device status is still "official" and the Knox counter is still set at 0x0.
Now that it's bootlooping I'd like to know if it's possible to take the applications and files off the phone before I factory reset it. It's not looking hopeful as I read similar threads from 2012 saying that once other Android devices bootloop, getting stuff off of them is impossible. I tried using ADB to take data off the phone (while Odin3 was detecting it being connected to the PC) but ADB doesn't detect the phone. Should I try a different cable?
Gotbootloopedtoomuch said:
Hi, guys! I understand it was an old thread, but I was referred here from Reddit. I have a Galaxy J3 (SM-J3109) purchased in Mainland China (Service provider is China Telecom). I rooted it with Kingo Root. Kingo Root stated that it successfully rooted the device, but the phone OS had given me warnings about unauthorized access to the device or something.
One week later (I did *not* reflash the phone nor install any applications after I rooted the phone) I found the phone stuck in an annoying bootloop. The device status is still "official" and the Knox counter is still set at 0x0.
Now that it's bootlooping I'd like to know if it's possible to take the applications and files off the phone before I factory reset it. It's not looking hopeful as I read similar threads from 2012 saying that once other Android devices bootloop, getting stuff off of them is impossible. I tried using ADB to take data off the phone (while Odin3 was detecting it being connected to the PC) but ADB doesn't detect the phone. Should I try a different cable?
Click to expand...
Click to collapse
Best advice would be to try flashing the stock firmware with odin. That shouldn't delete any of your data and will usually fix a bootloop. You can Google your phones stock firmware and see if you can download it.
darknaio said:
Best advice would be to try flashing the stock firmware with odin. That shouldn't delete any of your data and will usually fix a bootloop. You can Google your phones stock firmware and see if you can download it.
Click to expand...
Click to collapse
Thank you so much! I tried using Odin to flash a software update and it worked perfectly. The phone is back up and running and all of the files are still there!
Right now i have TWRP 3.0.2 with supersu and i havent lost root yet also had no problem switching between backups, xposed working fine and also overclock too with setcpu, im currently running 5.1.1 using j320FN but TWRP was from j320F, i will put up links to the files if any of you are willing to try its up to you.
TWRP flash through odin : http://www.mediafire.com/download/blk7qa90vs6wik3/TWRP_3.0.2-0_SM-J320F.tar.tar
Supersu flash through recovery then update through playstore then install busybox after through playstore : http://www.mediafire.com/download/cpv2c71cp11x41f/UPDATE-SuperSU-v2.76-20160630161323.zip
Remember to turn on usb debugging and turn on oem unlock before flashing recovery, also if you manage to get recovery press they grey box on the right to change language to english. Hope this might help somebody on here because we really need full root for everyone.