Given the positioning of the Nexus 4's buttons, it is not uncommon for the user to press the volume and lock buttons while attempting to unlock or lock the phone.
I noticed that on 4.3 and 4.4, every rom I tried, even stock 4.3. If the volume button was pressed when the lock button was pressed the phone would flash back to the previous screen state.
So if I wanted to activate the phone, pressed lock and accidentally pressed volume. The screen would wake and go to sleep right away, this would result in me miss tapping the off screen and pressing lock again where I risk repeating the cycle.
Or, in the anterior case. I would want to put the phone asleep, I press the lock, and accidentally hit one of the volume buttons resulting in the screen shutting off then quickly turning on and me putting down the phone with a lit screen.
Does anyone display this issue in their 4.3+ setup?
Related
So I run S2U2 and have it set to blank screen on talk. This works great since I occasionally would hang up on people or press buttons when my face touched the soft buttons on the screen. However, I also have Key Lock setup so my phone doesn't randomly come on all the time and drain the battery while it's in the holster. I also had a couple occasions (before turning on key lock) where S2U2 didn't come on and I ended up calling someone without knowing it.
Anyway, the problem I run into now is that when I'm done on the phone and want to hang up, the end call button is locked out and I have to first press power to get the screen back and then hang up. Is there something in between where I can have both the power and hang up button enabled while locked? Optimally the hang up button would only be enabled during a call so it wouldn't wake up the phone when not in use. A search brought up products like AE Buttons, but I didn't see an option to do what I want.
Thanks,
Gonz
With all that screen to touch, having this thing wake up in your pocket (or holster in my case) it bad - it registers keypresses all over the place, and so far it's deleted appointments and other fun stuff for me.
There is the screen lock (hold down right-most softkey a few seconds) but for me at least if an alert wakes the phone, the screen activates and looks normal, but all hardkeys are disabled. Can't even shut the phone down, have to hit the soft reset button, so conveniently located under the battery cover (argh, talk about dumb design choices...)
So anyone have any ideas on the screen lock? I'd even be willing to dedicate the left-most soft-key long-press to a third party lock, as long as it works properly.
u can use s2u2 IPHONE like screen lock
Hold the hang up button to lock, to unlock press the word unlock and a screen will apear saying To unlock device Tap unlock.
Yeah I did that, the hold hang up button thing... that's what's partly unlocking itself, which is a pain to say the least.
Gonna try Throttlelock. Haven't found any really Manila-lookalike skin yet but it seems to do what I want - lock the device - and even adds a little security.
And what about just clicking once on the power button after locking the device using the hold hang up thing?
Doesn't it does what you need? Press again to wake up the mobile?
- Bya -
No, what happen is: I hold down end call to get the device to lock. Then I tap the power button to close down the screen too.
However, a reminder kicks in and that brings the screen back online AND live, so touching it can do stuff. But, the device is still somehow "locked"... except the only thing that is well and truly locked are all the buttons. Power button, volume buttons, even the softkeys on the front, none of them do anything, but the screen works only too well.
There is now way I found to recover from that state except a soft reset. That boots the device - in locked mode, so I have to hit Unlock and then tap the button on the middle of the screen.
I need a lock that is lock, ie it doesn't activate the screen or buttons no matter what, until I unlock it myself. Looks like Throttlelock may be the answer though.
I left the camera on for a couple of minutes, took some pictures, and suddenly the screen didn't response to any touch, neither the capacitive buttons. There was a "lock icon" shown on the right top corner of the camera screen. I don't know whether I accidentally pressed something, but I couldn't get it back. Fortunately, the power button still worked, so I could turn the phone off and back on. Everything is fine now. It also happened once on my friends' Epic 4G.
If you hit the power button while the camera is active, it will lock it to prevent accidental screen presses.
Simply press the power button to unlock.
othan1 said:
If you hit the power button while the camera is active, it will lock it to prevent accidental screen presses.
Simply press the power button to unlock.
Click to expand...
Click to collapse
Got it. Thanks a lot.
How many of you have faced the problem:
The power button is too out of reach to bring the phone out of standby. I used Xperia x10 earlier and the phone will show the lock screen once the middle button is pressed.
However for the Desire HD, i have to somehow press the annoying power button for it to display the lock screen.
Cant there be any other button which can shopw trhe lock screen cuz to reach the power button is not so handy.
Set your screen timeout to something quick. It will lock itself then.
I don't really have this problem as have biggish hands, but I can imagine what it'd be like.
Locking is not the issue.
Unlocking is the issue. To bring the phone out of standby and to show the slide to unlock screen, one has to press the "OUT OF REACH" and designed to "AVOID ACCIDENTAL" press button at the top.
I mean the top button is already a accidental press proof position. It really is a task to first press it ans then unlock the phone. Thats 2 procedures just to make a call.
Can some one mod this?
It's happening every now and then, but sometimes when I press the lock screen button to unlock the screen, the lock screen comes up but I can't unlock it, it just ignores my finger like if the digitalizer was off. I have to press the button twice (to turn it off and on again) to make it work.
Any ideas?