Hi there,
how can i get the lan port of the Q working ? I can't find any configuration option in CM10.2 settings.
Okay, nevermind.
After disabling WiFi the Q connected via cable.
Sorry
Okay, nevermind.
After disabling WiFi the Q connected via cable.
Sorry
noonecanhide said:
Okay, nevermind.
After disabling WiFi the Q connected via cable.
Sorry
Click to expand...
Click to collapse
Awesome. Never knew. Thanks
Related
hi all,
I would like to connect my laptop computer (Win 2000) in internet with my O2 XDA using USB or serial cable (NOT with IrDA).
How can i do?
which hw and sw i need?
how must i configure XDA connection?
please help me before next weekend...
thanks
marco
All you should need is activesync latest version.
and the cable?
cruisin-thru said:
All you should need is activesync latest version.
Click to expand...
Click to collapse
and the cable? USB or serial?
you can use both
Hi,
Anyone successfully tether Tattoo under Linux ?
Through Bluetooth, USB cable ... just one will be good for me.
Regards
KC
Tethering works great using the HTC WWE ROMs.
Go to Wireless controls and select Mobile network sharing.
Then connect via USB cable; Linux recognizes the device
as usb0 and gets assigned IP address 192.168.100.100.
NB: this messages was sent using tethering!
Hi,
cherry314159 said:
Tethering works great using the HTC WWE ROMs.
Go to Wireless controls and select Mobile network sharing.
Then connect via USB cable; Linux recognizes the device
as usb0 and gets assigned IP address 192.168.100.100.
NB: this messages was sent using tethering!
Click to expand...
Click to collapse
Thanks for reply. What did you mean "HTC WWE ROMs" ?
Does it compatible with Tattoo ?
And could you please tell me which Linux distribution you are
using.
Thanks a lot.
KC
kccheng said:
Hi,
Thanks for reply. What did you mean "HTC WWE ROMs" ?
Does it compatible with Tattoo ?
And could you please tell me which Linux distribution you are
using.
Thanks a lot.
KC
Click to expand...
Click to collapse
Hi,
Just let you guys know, I figure it out now. I'm using OpenSuSE 10.3 and my problem was I did not configure the interface.
Thanks a lot.
KC
kccheng said:
Hi,
Just let you guys know, I figure it out now. I'm using OpenSuSE 10.3 and my problem was I did not configure the interface.
Thanks a lot.
KC
Click to expand...
Click to collapse
Mmm... I tested on CentOS 5.4 and it doesn't work. CentOS 5.4 see HTC Tattoo as usb-storage.
KC
You need to enable "Mobile network sharing" found at the end of "Wireless controls". I have software version 1.67.405.6.
When connecting the USB, a small pop up window asks you to select whether you want it to act as a USB storage device or a networking device.
hi alls,, wta how to connect usb modem 3g acer iconia a500?
thx b4
+1, same question
+1
I'm definitely interested also.
+1 Good question...
Really looking forward to the answer/suggestions from the experts
is this what you're looking for?
http://forum.xda-developers.com/showthread.php?t=1058846
Is there anyone succeeded? Share your experience here, please ^^
Why not use a Mifi or a Huawei E5830?
Or if you have already an Android 2.2 Phone, use Wifi Tethering?
Hello
My experience :
First : same problem : my tablet don't want to connect with my HD2 (Rom WM NRGZ), while my laptop can do.
But today I show my Iconia 500 to my work, and a friend with her HTC Desire HD with Android custom ROM and wifi tethering connect it without problem...
But it's not a USB modem it's wifi tethering (I'm probably off topic ?)
@+
Hi
I've the same combination (iconia-hd2 wm) and wrestled quite a while to tether in windows mobile. Tried numerous wpa-supplicants and tetherprogs but none worked. The solution.......change your HD2 from windows to Android. I've CyanogenMod Android 2.2. (search in HD2 forum) I can dual boot but so satisfied with Android that i keep it running continuous. Tethering the Iconia.........just start "wireless tethering" in Android, connect and ready.
groaner said:
is this what you're looking for?
http://forum.xda-developers.com/showthread.php?t=1058846
Click to expand...
Click to collapse
Thanks, that worked for me.
I have a ZTE 3G USB.
Also tried tethering with a Galaxy S, also that works.
Just follow the steps from the post, and it should work.
m_marcel said:
Also tried tethering with a Galaxy S, also that works.
Click to expand...
Click to collapse
USB or WiFi?
urbie47 said:
Hi
I've the same combination (iconia-hd2 wm) and wrestled quite a while to tether in windows mobile. Tried numerous wpa-supplicants and tetherprogs but none worked. The solution.......change your HD2 from windows to Android. I've CyanogenMod Android 2.2. (search in HD2 forum) I can dual boot but so satisfied with Android that i keep it running continuous. Tethering the Iconia.........just start "wireless tethering" in Android, connect and ready.
Click to expand...
Click to collapse
Hi
Tanks, for me it's the solution, but now I search a SD build that suits me...
And I search a solution for WM
@+
Bec07 said:
USB or WiFi?
Click to expand...
Click to collapse
WiFi
I don't think it will work with USB..at least I didn't find a way to do this with my PC
Not to be completely annoying, but the [DEV] thread is for someone who knows their way around. If anyone could post a dummy's step-by-step it would be a huge help for noobie android enthusiasts.
m_marcel said:
Thanks, that worked for me.
I have a ZTE 3G USB.
Also tried tethering with a Galaxy S, also that works.
Just follow the steps from the post, and it should work.
Click to expand...
Click to collapse
i'm trying with A500 with ZTE modem.
I followed http://forum.xda-developers.com/showthread.php?t=1058846
and as first step says
* put the modules from my other post in the root of /sdcard
copied modules - k2.6.36.3.zip and copied to /sdcard
I facing permission error during
put chat,ppp-start.sh,ppp-stop.sh in /system/xbin
how to solve this?
can someone make a noob guide
i have two usb 3g modems
huawei - E1750
ZTE-MF190
i have rooted iconia, and got the files needed, if someone can help me, i will be very thankful for the same
Hi guys, I upgraded to the "Floyo 0.30" and everything worked except the wifi tether. Barnacle I use when I start it but can not find the network from another computer. Anyone have any idea how to tether wifi work? I really need to get by in this situation. Thank you and sorry for my bad english.
fabiofurquim said:
Hi guys, I upgraded to the "Floyo 0.30" and everything worked except the wifi tether. Barnacle I use when I start it but can not find the network from another computer. Anyone have any idea how to tether wifi work? I really need to get by in this situation. Thank you and sorry for my bad english.
Click to expand...
Click to collapse
Same issue for me... Barnacle can't give DHCP address to Windows 7 computer when running Floyo 0.30.
Hi all, I have a usb external wifi dongle for my N7 that I can bring up in a terminal and it works ok, but I cannot get any android aps to 'see' it , If I launch an ap it only offers the std. internal wifi chip (wlan0) for connection and not wlan1. Can anyone help with some pointers how/were I can mod to allow aps to use ext usb wifi wlan1 ?
Many thanks
Regards
Vertab7
correct forum ?
vertab7 said:
Hi all, I have a usb external wifi dongle for my N7 that I can bring up in a terminal and it works ok, but I cannot get any android aps to 'see' it , If I launch an ap it only offers the std. internal wifi chip (wlan0) for connection and not wlan1. Can anyone help with some pointers how/were I can mod to allow aps to use ext usb wifi wlan1 ?
Many thanks
Regards
Vertab7
Click to expand...
Click to collapse
Is this correct forum to post?
Yes, correct forum. What kernel and rom are you running?
Sent from my Nexus 7 using xda premium
vertab7
rebel1699 said:
Yes, correct forum. What kernel and rom are you running?
Thanks for the reply, (should I delete the duplicate post?)
My rom is 4.2.1, kernel is 3.1.10-ZeroNin-32g-droid-g22b4fcd-dirt ([email protected] #7) build JOP40D, its the pwnpad community edition image from http://sourceforge.net/projects/pwnpad/files/. I want the android and ubuntu tools to both use the external wifi dongle not just the ubuntu command line software. Any advice/pointers/ideas gratefully rec'd.
Regards
Jay
Click to expand...
Click to collapse
Take a look at this kernel by m4xxed0ut. Seems to be working for other tp link users. Good luck!
http://forum.xda-developers.com/showthread.php?p=40447183
Sent from my Nexus 7 using xda premium
rebel1699 said:
Take a look at this kernel by m4xxed0ut. Seems to be working for other tp link users. Good luck!
http://forum.xda-developers.com/showthread.php?p=40447183
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Many thanks!, I shall take a look now.
regards Jay