Related
i jus't installed a new firmware from tabi13 in my elf, and everything is working fine, but the network detection seems to do an automatic detection of the settings from my provider (Orange Dominicana) and put some t-mobile settings
i just wanted to publish this information for any ROM builder if it can be changed in future releases, or for reference for other people.
Settings for Dominican Republic:
1
Orange Dominicana
Network Name: ORANGE
Network Number: 37001
APN: orangenet.com.do
no autenticantion or any other setting
1900 Mhz GSM/ 900 Mhz 3g
2
Claro/Codetel
Network Name: CLARO
Network Number: 37002
APN: internet.ideasclaro.com.do
No other Setting
850/1900Mhz GSM /850 Mhz 3g
3
Viva
Network Name: VIVA
Network Number: 37004 (Thanks Ajape for the confirmation)
APN: edge.viva.com.do
not sure about auth. I Believe is user and password 'viva' without the '
1900Mhz GSM
if anybody knows anything else, please post.if possible, for ROM cookers, update the auto detection settings in future releases (i don't know if it is possible or how)
Operator settings
There's one elfin ROM with the correct automatic settings for Dominican Republic it's and Opal based rom, not sure it's available for elf, I did notice the same problem with over 20 different roms for different models from wizards to tilts. can not recall the chef, on that particular ROM but it's there.
That's funny
The Onyx ROM which can be used in the ELF, mostly ELFin, but has run well in your model has correct Network Settings. I have personally flashed them for Orange as well, and it works properly. It is a ROM based from the updated ELFin ROM found in HTCs site.
Paul
Gracias for the information saved me allot of time.
Creo que viva es 37004.
Confirmed, 37004 is for Viva, although is registered still as CENTENNIAL DOMINICANA. 37003 is for TRICOM DOMINICANA.
Does anyone have the EDGE configuration for either ORANGE Dominicana or VIVA?
I´m using an HTC Kaiser, and would really appreciate them.
Edge
Just read the first line of this thread, it´s all listed there!
Thanks. My G1 didn't want to pick up my settings and this worked like a charm. I came to DR for vacation and was struggling trying to get my inet working.
The low down on Dominican Telecom's
Orange 37001 1900/1800Mhz
Claro 37002 1900Mhz
Claro 37003 850Mhz 3G 3.5
VIVA 37004 1900Mhz Soon to be Movistar............
Tricom (CDMA) 800/1900Mhz
MATOSI
Is that so?
MATOSI said:
Orange 37001 1900/1800Mhz
Claro 37002 1900Mhz
Claro 37003 850Mhz 3G 3.5
VIVA 37004 1900Mhz Soon to be Movistar............
Tricom (CDMA) 800/1900Mhz
MATOSI
Click to expand...
Click to collapse
Where did you get that information from? I'm desperately waiting to see that... To teach some telecom ***** a lesson...
borisdmitri said:
i jus't installed a new firmware from tabi13 in my elf, and everything is working fine, but the network detection seems to do an automatic detection of the settings from my provider (orange dominicana) and put some t-mobile settings
i just wanted to publish this information for any rom builder if it can be changed in future releases, or for reference for other people.
Settings for dominican republic:
1
orange dominicana
network name: Orange
network number: 37001
apn: Orangenet.com.do
no autenticantion or any other setting
2
claro/codetel
network name: Claro
network number: 37002
apn: Internet.ideasclaro.com.do
no other setting
3
viva
network name: Viva
network number: (not sure)
apn: Edge.viva.com.do
not sure about auth. I believe is user and password 'viva' without the '
if anybody knows anything else, please post.
If possible, for rom cookers, update the auto detection settings in future releases (i don't know if it is possible or how)
Click to expand...
Click to collapse
in viva the network number is 37004
Hi
I have a milestone a853 and i'd like to know if there a way to make it work on 3G
thats because i it only connect to edge thats in Santo Domingo
Orange dominicana is 900/1900 Mhz on 3G, don't confuse GSM with 3G frequencies, it's not the same thing.
Sent from my HTC HD2 using XDA App
I cant get any of my phones to work on 3g yet over the orange dominicana network! I have mytouch 4g and an atrix 4g... None if them get the 3g connection (mt4g is 900 3g and atrix 850) . Any ideas?
I will second (or third) the requests made above....
I was also in D.R. recently with my Tmobile Vibrant and couldn't get EDGE data connectivity with Claro to save my life. I went f***ng nuts trying everything. I had researched my phone capabilities ahead of time and found the following:
2G Network GSM 850 / 900 / 1800 / 1900
HSDPA 1700 / 1900 / 2100
From the posts listed above, Claro has 2G @ 1900Mhz. When I checked Wikipedia prior to my trip, it shows:
Claro Dominicana
CDMA 1xEV-DO in 800/1900 MHz
GSM/GPRS/EDGE in 850/1900 MHz
UMTS/HSDPA service in the 850 MHz band
Whiskey Tango Foxtrot?
Is there some kind of trick to get 2G data working? I am at a loss...I should have had 2G data (I knew I wasn't getting 3G), instead I was all sorts of lost without Google Maps. For the record...paper maps suck!
Someone PLEASE shed light on this situation. I am going back soon, I need data on my phone!
T-mo's 3G bands are not compatible with Orange 3G. The Atrix is not compatible either, however, theoretically you can use the Atrix with Claro's 3G since Att and Claro's 3G bands are compatible. I haven't tried this yet.
stovarich said:
I cant get any of my phones to work on 3g yet over the orange dominicana network! I have mytouch 4g and an atrix 4g... None if them get the 3g connection (mt4g is 900 3g and atrix 850) . Any ideas?
Click to expand...
Click to collapse
Did you make sure you have the correct APNs?
smooth3done said:
I will second (or third) the requests made above....
I was also in D.R. recently with my Tmobile Vibrant and couldn't get EDGE data connectivity with Claro to save my life. I went f***ng nuts trying everything. I had researched my phone capabilities ahead of time and found the following:
2G Network GSM 850 / 900 / 1800 / 1900
HSDPA 1700 / 1900 / 2100
From the posts listed above, Claro has 2G @ 1900Mhz. When I checked Wikipedia prior to my trip, it shows:
Claro Dominicana
CDMA 1xEV-DO in 800/1900 MHz
GSM/GPRS/EDGE in 850/1900 MHz
UMTS/HSDPA service in the 850 MHz band
Whiskey Tango Foxtrot?
Is there some kind of trick to get 2G data working? I am at a loss...I should have had 2G data (I knew I wasn't getting 3G), instead I was all sorts of lost without Google Maps. For the record...paper maps suck!
Someone PLEASE shed light on this situation. I am going back soon, I need data on my phone!
Click to expand...
Click to collapse
HElP
is there anyway to get free internet on android in the Dominican Republic cuz I seen some blackberrys with free data
afreshd said:
is there anyway to get free internet on android in the Dominican Republic cuz I seen some blackberrys with free data
Click to expand...
Click to collapse
Dude I'm going nuts I tried the orange sim card for blackberries and no luck while my cuzz got free edge on orange prepaid!!! Wtf!
Hi guys.
I got a highly noobish and probably stupid question about my Nexus One.
Using the *#*#4636#*#* / phone information / network type: EDGE.
My wife's wildfire shows HSDPA and we ure under the same operator.
So, its a phone problem? It doesnt support HSDPA? If so, how to change that?
I understand there are 2 versions of Nexus One, how to figure out which one I have?
Thanks in advance!
There are 2 versions of the Nexus 1 that are out. One that works with tmobile 3g and one that works with at&t 3g. If you use the tmobile version with at&t you will only be able to get EDGE.
How long have you had your N1? Did you buy it new or used? Who is your provider?
krazichinaman said:
There are 2 versions of the Nexus 1 that are out. One that works with tmobile 3g and one that works with at&t 3g. If you use the tmobile version with at&t you will only be able to get EDGE.
How long have you had your N1? Did you buy it new or used? Who is your provider?
Click to expand...
Click to collapse
Thank you for your answer. Really fast.
I live in Colombia, South America. My provider is movistar.
I have the nexus about 6 months ago. Rooted. Running CM nightlies.
What do you say about the result on *#*#4636#*#*??
Thanks again.
movistar uses 2100mhz for hsdpa in colombia correct? Both the wildfire and nexus one should support 2100mhz no matter what version you have, so you should be able to get it on both phones if it's available. The only reason maybe you wouldn't is that you have the "Use only 2G networks" option enabled?
Something else, in the data icon of the notification bar does it say the same thing as it does on the phone information screen, or do they both indicate edge?
greenlime812 said:
movistar uses 2100mhz for hsdpa in colombia correct? Both the wildfire and nexus one should support 2100mhz no matter what version you have, so you should be able to get it on both phones if it's available. The only reason maybe you wouldn't is that you have the "Use only 2G networks" option enabled?
Something else, in the data icon of the notification bar does it say the same thing as it does on the phone information screen, or do they both indicate edge?
Click to expand...
Click to collapse
2G Networks only unchecked.
Indicate Edge in notification bar and in phone information (4636).
Is there a way to change or fix this thing out?
Thank you.
drziddo said:
2G Networks only unchecked.
Indicate Edge in notification bar and in phone information (4636).
Click to expand...
Click to collapse
This is true on both phones? But it is only the wildfire that says hsdpa in phone information?
In phone information, scroll down a bit to the drop down box of network types above "Turn off radio". What is this setting?
greenlime812 said:
This is true on both phones? But it is only the wildfire that says hsdpa in phone information?
In phone information, scroll down a bit to the drop down box of network types above "Turn off radio". What is this setting?
Click to expand...
Click to collapse
Wildfire: WCDMA preferred.
Nexus: WCDMA preferred.
Set both to GSM only. After a minute, if the wildfire still says hsdpa then it is likely a firmware issue where the connection information is permanately set to "hsdpa" or it doesn't update as it should. Have you traveled into an hsdpa service area recently?
Do you think changing the radio band may work? I didnt see any checked right now... in any of the phones...
greenlime812 said:
Set both to GSM only. After a minute, if the wildfire still says hsdpa then it is likely a firmware issue where the connection information is permanately set to "hsdpa" or it doesn't update as it should. Have you traveled into an hsdpa service area recently?
Click to expand...
Click to collapse
After a while the wildfire was unable to coneect via data connection when I put GSM only.
When changing to GSM only, the nexus keeps showing E.
The radio band should auto-adjust based on what is available. I don't know that you can specify a certain radio band in android.
The wildfire has "E" in the notification bar at all times, correct?
greenlime812 said:
The radio band should auto-adjust based on what is available. I don't know that you can specify a certain radio band in android.
Click to expand...
Click to collapse
I mean, where you can choose Automatic, EURO band, USA band, JAPAN band, AUS band, AUS2 band...
greenlime812 said:
The radio band should auto-adjust based on what is available. I don't know that you can specify a certain radio band in android.
The wildfire has "E" in the notification bar at all times, correct?
Click to expand...
Click to collapse
No, the wildfire has H, the Nexus E.
movistar does not use the same bands for gsm and hsdpa anyway, this is a strange issue but I suspect it is simply a firmware issue
Edit: Maybe what I read was wrong. Do you know for sure what your provider uses for hsdpa in your area?
One version of the nexus one uses 850/1900/2100 and the other uses 900/1700/2100 for hsdpa, while the wildfire uses 900/2100. But they both have 850/900/1800/1900 for gsm. I didn't think 900mhz was used in South America?
greenlime812 said:
movistar does not use the same bands for gsm and hsdpa anyway, this is a strange issue but I suspect it is simply a firmware issue
Click to expand...
Click to collapse
But in the meantime, Im only getting edge having hsdpa available.
What can I do to fix this?
greenlime812 said:
movistar does not use the same bands for gsm and hsdpa anyway, this is a strange issue but I suspect it is simply a firmware issue
Edit: Maybe what I read was wrong. Do you know for sure what your provider uses for hsdpa in your area?
Click to expand...
Click to collapse
Let me ask first. If the phone shows H not necessarily theres HDSPA? Is what you mean?
They claim to offer 3.5g. Edge is 3g? Hsdpa is 3.5g?
The only thing I can think of is that your provider is using 900mhz for hsdpa and you have the wrong version of the nexus so you will not be able to use that band. Or, you have gsm 900 available and not hsdpa at all and the wildfire is interpreting gsm as hsdpa. Download a speedtest app and see if the connection speed on the two phones is actually any different.
greenlime812 said:
movistar does not use the same bands for gsm and hsdpa anyway, this is a strange issue but I suspect it is simply a firmware issue
Edit: Maybe what I read was wrong. Do you know for sure what your provider uses for hsdpa in your area?
One version of the nexus one uses 850/1900/2100 and the other uses 900/1700/2100 for hsdpa, while the wildfire uses 900/2100. But they both have 850/900/1800/1900 for gsm. I didn't think 900mhz was used in South America?
Click to expand...
Click to collapse
How can I know?
I know, the other carrier claims hsdpa, COMCEL is the name of the operator.
But if my phone is configured to EDGE, what can I do then?
I'm sorry this issue is so confusing. I read conflicting information about what bands Movistar is using for gsm and hsdpa in your country. The operator name in the notification bar is Movistar, correct? If it is, the wildfire can not be using COMCEL.
greenlime812 said:
I'm sorry this issue is so confusing. I read conflicting information about what bands Movistar is using for gsm and hsdpa in your country. The operator name in the notification bar is Movistar, correct? If it is, the wildfire can not be using COMCEL.
Click to expand...
Click to collapse
Yes. Movistar. But actually comcel haves better network and services here, so Im trhing to find out ic I can improve my browsing experience in terms of speed...
Hello,
I recently received a Samsung Galaxy Tab (GT-P1000 Int'l Edition w/ white backplate) as a gift.
I live on Guam. The Tab was purchased from DoCoMo Pacific (NTT DoCoMo's Pacific sales/service provider), but I use a different local carrier as I prefer their 3G service.
The phone only offers GSM and WCDMA option in Mobile network settings->Network mode.
Is it possible to flash to a different ROM that would enable the 3G option?
I'm new to Android, as I'm a iPhone/iPad convert.
Any help would be greatly appreciated.
Thanks in advance.
PDA: P1000XWJJ3
PHONE: P1000XXJID
CSC10000CPWJJ3
jayton.okada said:
The phone only offers GSM and WCDMA option in Mobile network settings->Network mode.
Is it possible to flash to a different ROM that would enable the 3G option?
Click to expand...
Click to collapse
WCDMA *is* 3G.
You need to check you APN to see if it is set up for your carrier.
Regards,
Dave
I cant see LTE in my mobile networks mode in G900FD
it has only:
WCDMA/GSM (auto connect)
WCDMA only
GSM only
can anybody help me to turn my LTE on ?
rmn3432 said:
I cant see LTE in my mobile networks mode in G900FD
it has only:
WCDMA/GSM (auto connect)
WCDMA only
GSM only
can anybody help me to turn my LTE on ?
Click to expand...
Click to collapse
Well if your APN settings are allright you either have no LTE coverage or it isn`t available at your provider. LTE should be activated automaticaly if available.
gee2012 said:
Well if your APN settings are allright you either have no LTE coverage or it isn`t available at your provider. LTE should be activated automaticaly if available.
Click to expand...
Click to collapse
my APN setting is right and i am in LTE coverage (my galaxy s3 9305 has LTE/WCDMA/GSM mode and connect to LTE network) but it has not any LTE in setting and i cant connect to LTE
I update to G900FDXXU1ANH2 to resolve this problem but it doesnt resolved
rmn3432 said:
my APN setting is right and i am in LTE coverage (my galaxy s3 9305 has LTE/WCDMA/GSM mode and connect to LTE network) but it has not any LTE in setting and i cant connect to LTE
I update to G900FDXXU1ANH2 to resolve this problem but it doesnt resolved
Click to expand...
Click to collapse
Better contact your provider. Does the G900FD support your providers LTE band/frequency? I would check that first.
gee2012 said:
Better contact your provider. Does the G900FD support your providers LTE band/frequency? I would check that first.
Click to expand...
Click to collapse
i think that i have to see LTE in networks if there is no sim card registered in the phone
am i right ?
rmn3432 said:
i think that i have to see LTE in networks if there is no sim card registered in the phone
am i right ?
Click to expand...
Click to collapse
That would be impossible as you cannot connect to the network without a simcard
gee2012 said:
That would be impossible as you cannot connect to the network without a simcard
Click to expand...
Click to collapse
and i cant go to networks too
rmn3432 said:
and i cant go to networks too
Click to expand...
Click to collapse
I`am starting to think that the G900FD supports different LTE bands then the G900F because it is build for a different region. Its mainly sold in the far east as i can see so far. Better Google to find the specs and the phones supported LTE bands. You may not be able to get LTE with your device i`am afraid. Good luck mate.
gee2012 said:
I`am starting to think that the G900FD supports different LTE bands then the G900F because it is build for a different region. Its mainly sold in the far east as i can see so far. Better Google to find the specs and the phones supported LTE bands. You may not be able to get LTE with your device i`am afraid. Good luck mate.
Click to expand...
Click to collapse
you are right
i have to check frequency bands in my phone becuse i buy this phone from UAE and i dont know that LTE bands are the same as my operators lte frequency bands
You should see LTE on sim2 only. Not Sim 1 .
rmn3432 said:
you are right
i have to check frequency bands in my phone becuse i buy this phone from UAE and i dont know that LTE bands are the same as my operators lte frequency bands
Click to expand...
Click to collapse
i am planning to buy this phone, can anybody share the supported LTE bands or networks where LTE has been used successfully
Similar problem with me, could anybody share some insight
Hi guys
I also had the issue of LTE not being selectable on my S5 Duos - here's my experiences.
Firstly I tried putting another carriers SIM into the phone, and noticed that LTE -was- selectable, but upon putting my own SIM back in, it again wasn't. HOWEVER - after putting my own SIM back in after using LTE on the other SIM, the phone automatically connected to LTE/4G even though WCDMA (auto) was selected! Very odd.
To permanently fix this here was my method -
My phone was shipped with ANF7 firmware, which was patched to overcome the kernel vulnerability Towelroot uses to gain root. I flashed my phone with ODIN back to ANF6 firmware, applied towelroot V3, then installed root browser and edited the system file data >property>persist.radio.lteon and changed the value from false to true, and rebooted the phone. LTE is now selectable!
:EDIT: Upgrading again to ANF7 broke the selection, but it still connected to LTE automatically... So odd.
rmn3432 said:
I cant see LTE in my mobile networks mode in G900FD
it has only:
WCDMA/GSM (auto connect)
WCDMA only
GSM only
can anybody help me to turn my LTE on ?
Click to expand...
Click to collapse
Hi,
I had the same issue as yours. You can either fix it by a method explained here at XDA and it involves rooting the device. However I fixed my issue by flashing the latest firmware "G900FDXXU1ANJ2" for the month of November via Odin and now I can see the LTE/WCDMA/GSM option on sim 1. Hope this helps
Hello,
I have been using my Meizu MX5 for about two months now without the 4G network working. I have recently updated to the latest firmware and I am currently running Flyme OS 4.5.2.7A and that has not solved any issues either.
I have checked that the phone settings are configured properly.
Network Mode is set to "4G First".
The phone is pending between, H-, H and H+ connection (3G I believe?)
I have checked with my provider and these are the following frequencies which should be providing 4G in my country (Sweden) for the provider:
800Mhz, 900MHz, 1800MHz, 2600MHz
Other providers have the same frequencies as well.
I have also gotten two new SIM-Cards during this period of time without it solving any issues. I have tried the SIM cards in some other phones and they get 4G connection without any issues.
I have been in contact with Meizu customer support in China and after some random troubleshooting of factory resetting and reinstalling the same firmware on the phone without solving anything.
They have also provided me information regarding the different bands/frequencies which the phone operates on:
GSM/GPRS/EDGE (900/1800/1900MHz)
WCDMA/HSPA+: Band 1/2/8 (900/2100MHz)
FDD LTE: Band 1/3 (1800/2100MHz)
TD-SCDMA: Band 34/39 (no freqency specified)
TD-LTE: Band 38/39/40/41 (no frequency specified)
I am not 100% sure on how this works but according to the information I am given, the phone and my provider share at least one frequency for the 4G network and therefore I do not understand why it is not working.
I am sure that it is software related and thus I won't send my phone back to China (4-8 weeks delivery time and all expenses has to be paid by me) for them to troubleshoot.
Anyone here who has knowledge which could give me an answer?
Kind regards,
Martin
Hi mate.
I had this problem but upgraded to new firmware late last night and it came on. Thankfully!
Give it a try
Hi,
I have checked the upgrade app on the phone and it says I have the latest firmware.
Which firmware version are you running?
Kind regards,
Martin
Maybe it is an APN related problem. Look if you have the same data as in the other phones that 4G works
iicc said:
Maybe it is an APN related problem. Look if you have the same data as in the other phones that 4G works
Click to expand...
Click to collapse
Hi iicc,
Thank you for the reply.
I have checked the APN settings about four-five times and I can't find any inconsistencies. I have even crosschecked it with a support technician from my provider.
The only things I can think of is either my anntenna being gimped, that the firmware is not properly developed or that somehow there's trash in my system and that my phone maybe needs a complete wipe and reinstallation.
After the upgrade to firmware 4.5.2.7A the phone does not even hint on trying to connect to 4G. Pre-upgrade it atleast connected to 4G for about 5 seconds and then went down to 3G.
Kind regards,
Martin
hawdes said:
Hi iicc,
Thank you for the reply.
I have checked the APN settings about four-five times and I can't find any inconsistencies. I have even crosschecked it with a support technician from my provider.
The only things I can think of is either my anntenna being gimped, that the firmware is not properly developed or that somehow there's trash in my system and that my phone maybe needs a complete wipe and reinstallation.
After the upgrade to firmware 4.5.2.7A the phone does not even hint on trying to connect to 4G. Pre-upgrade it atleast connected to 4G for about 5 seconds and then went down to 3G.
Kind regards,
Martin
Click to expand...
Click to collapse
And have you tried to factory data reset the phone?
hawdes said:
Hello,
I have been using my Meizu MX5 for about two months now without the 4G network working. I have recently updated to the latest firmware and I am currently running Flyme OS 4.5.2.7A and that has not solved any issues either.
I have checked that the phone settings are configured properly.
Network Mode is set to "4G First".
The phone is pending between, H-, H and H+ connection (3G I believe?)
I have checked with my provider and these are the following frequencies which should be providing 4G in my country (Sweden) for the provider:
800Mhz, 900MHz, 1800MHz, 2600MHz
Other providers have the same frequencies as well.
I have also gotten two new SIM-Cards during this period of time without it solving any issues. I have tried the SIM cards in some other phones and they get 4G connection without any issues.
I have been in contact with Meizu customer support in China and after some random troubleshooting of factory resetting and reinstalling the same firmware on the phone without solving anything.
They have also provided me information regarding the different bands/frequencies which the phone operates on:
GSM/GPRS/EDGE (900/1800/1900MHz)
WCDMA/HSPA+: Band 1/2/8 (900/2100MHz)
FDD LTE: Band 1/3 (1800/2100MHz)
TD-SCDMA: Band 34/39 (no freqency specified)
TD-LTE: Band 38/39/40/41 (no frequency specified)
I am not 100% sure on how this works but according to the information I am given, the phone and my provider share at least one frequency for the 4G network and therefore I do not understand why it is not working.
I am sure that it is software related and thus I won't send my phone back to China (4-8 weeks delivery time and all expenses has to be paid by me) for them to troubleshoot.
Anyone here who has knowledge which could give me an answer?
Kind regards,
Martin
Click to expand...
Click to collapse
Let me try to come up with something that might be your problem. If you are using 3 as your mobile provider then they use FDD-LTE band 7 & 20 none of which are supported by the MX5 and 3 are also using TDD-LTE band 38 which is supported by the MX5, but might not be available in your area.
If you are on Net4Mobility then they use FDD-LTE 3,7,8 & 20 of which only 3 is supported, so it could that in your area there is no coverage with band 3.
If you are on Telia, the story is pretty much the same as Net4Mobility as they use FDD-LTE 3,7 & 20.
In order to get more from your phone. You can open up google and search for 'meizifan eu' and go to the website. They have a pretty good description of how you install the international version of FlyMe on your MX5, the international version is called 4.5.2.7i. I believe it activates some other FDD-LTE and TDD-LTE bands.
1800Mhz band is a short range, higher bandwidth frequency which usually is less common and given that it has a short range it most likely isn't available in your area.
nasty_suicide said:
Let me try to come up with something that might be your problem. If you are using 3 as your mobile provider then they use FDD-LTE band 7 & 20 none of which are supported by the MX5 and 3 are also using TDD-LTE band 38 which is supported by the MX5, but might not be available in your area.
If you are on Net4Mobility then they use FDD-LTE 3,7,8 & 20 of which only 3 is supported, so it could that in your area there is no coverage with band 3.
If you are on Telia, the story is pretty much the same as Net4Mobility as they use FDD-LTE 3,7 & 20.
In order to get more from your phone. You can open up google and search for 'meizifan eu' and go to the website. They have a pretty good description of how you install the international version of FlyMe on your MX5, the international version is called 4.5.2.7i. I believe it activates some other FDD-LTE and TDD-LTE bands.
Click to expand...
Click to collapse
Thank you for the reply nasty_suicide!
I am using Comviq Tele2 as provider, which should use the Telia net.
This is what I believe as well, but I really thought there was no way to flash the international version onto the phone and was about to abandon ship by buying a new phone yet again.
I will try to install the International version as soon as I have time to follow through the steps. I have found the guide on Meizufans.
Once I have installed the international version I'll let everyone know the outcome.
Kind regards,
Martin
Hi Hawdes,
I've exactly the same problem as you do, please post back once you instal I version. I was planning to do so but since I already have everything installed I didn't want to go through trouble for nothing.
What were the results of this? Is it true that firmware can affect the signal received?
upgraded to the latest firmware yet?
Samsung galaxy s7 4G problem
What about in Samsung galaxy s7 version of Flyme OS?? I cannot see 4G option.