Recently flashed Wicked v. 9.1 onto the stock slot using safestrap recovery, so far the rom has been working fine, and I've set up the apn. When looking at device info it shows I am connected to AT&T and LTE, but my mobile network state is disconnected. Any solutions for this?
DVezor said:
Recently flashed Wicked v. 9.1 onto the stock slot using safestrap recovery, so far the rom has been working fine, and I've set up the apn. When looking at device info it shows I am connected to AT&T and LTE, but my mobile network state is disconnected. Any solutions for this?
Click to expand...
Click to collapse
Check to see if you still have the same modem as you started with.... I flashed a rom, I had connection but would cut out now and again... ended up relashing the same modem that was on the phone before... (modem did not change) now I have data and solid connection for phone calls.
Gage_Hero said:
Check to see if you still have the same modem as you started with.... I flashed a rom, I had connection but would cut out now and again... ended up relashing the same modem that was on the phone before... (modem did not change) now I have data and solid connection for phone calls.
Click to expand...
Click to collapse
Not sure which modem I had before however I flashed from mk2 and just flashed the new modem and still no change
DVezor said:
Not sure which modem I had before however I flashed from mk2 and just flashed the new modem and still no change
Click to expand...
Click to collapse
You sure mobile data is checked on in the settings? And did you flash the MK2 modules?
Google the kind of phone you have and ATT is your provider I take it? Include which version of android also so something like..... i337 modem att android 4.3 of course swtich the proper name and provider that you have. You don't want to be flashing the wrong modem you could end up with a paper weight....
I have a Canadian Galaxy S4 i377m from Telus.
It's still running stock 4.2.2 MG1.
I want to upgrade to the KANGAKAT 4.4.2 ROM. I've been able to use TWRP to flash it and it seems to work correctly except that the Cell connection drops after the first call and then it says I have no service. For now, I restored my stock ROM and data from nandroid backup.
I have this exact problem: http://forum.xda-developers.com/showpost.php?p=49943845&postcount=1023
After lots of reading and research (it's my first time trying to flash a custom ROM), I think I need to update the radio.
Is MK6 the correct radio firmware to flash on my phone? Should I flash the radio before or after installing the new 4.4.2 ROM?
I know the radio firmwares are here: http://forum.xda-developers.com/showthread.php?t=2324667
What the hell is nonhlos.bin and do I need to pay attention to that?
I want a very stable GPE ROM. I won't be updating frequently and don't want to try many ROMS. Is kangakat the best choice?
Thanks for any and all help and advice.
frankxda-dev said:
I have a Canadian Galaxy S4 i377m from Telus.
It's still running stock 4.2.2 MG1.
I want to upgrade to the KANGAKAT 4.4.2 ROM. I've been able to use TWRP to flash it and it seems to work correctly except that the Cell connection drops after the first call and then it says I have no service. For now, I restored my stock ROM and data from nandroid backup.
I have this exact problem: http://forum.xda-developers.com/showpost.php?p=49943845&postcount=1023
After lots of reading and research (it's my first time trying to flash a custom ROM), I think I need to update the radio.
Is MK6 the correct radio firmware to flash on my phone? Should I flash the radio before or after installing the new 4.4.2 ROM?
I know the radio firmwares are here: http://forum.xda-developers.com/showthread.php?t=2324667
What the hell is nonhlos.bin and do I need to pay attention to that?
I want a very stable GPE ROM. I won't be updating frequently and don't want to try many ROMS. Is kangakat the best choice?
Thanks for any and all help and advice.
Click to expand...
Click to collapse
For the modem, if your going to 4.4.2, you want to flash the NC1 modem. It has been listed in various threads on here. I just flashed the modem.bin file only, I have seen people get in trouble flashing the nonhlos file (loosing wifi and such). Just extract the modem.bin file and flash it through odin PC, make sure you take off the auto reboot as it takes longer to flash than odin allows before rebooting. Also when you flash, once odin says complete, boot back into download mode and repeat the flash, not sure this is necessary but it seems to help in some cases. as far as a GPE rom, check Danvh's thread, that one is build for Canadian phones, just make sure you don't flash anything that is just for I337 (US Version) you want to stick to roms that are specifically for i337m. There islikely going to be an update in th next month or so to 4.4.3 so it is up to you if you want to wait for that or flash again.....
Gage_Hero said:
For the modem, if your going to 4.4.2, you want to flash the NC1 modem. It has been listed in various threads on here. I just flashed the modem.bin file only, I have seen people get in trouble flashing the nonhlos file (loosing wifi and such). Just extract the modem.bin file and flash it through odin PC, make sure you take off the auto reboot as it takes longer to flash than odin allows before rebooting. Also when you flash, once odin says complete, boot back into download mode and repeat the flash, not sure this is necessary but it seems to help in some cases. as far as a GPE rom, check Danvh's thread, that one is build for Canadian phones, just make sure you don't flash anything that is just for I337 (US Version) you want to stick to roms that are specifically for i337m. There islikely going to be an update in th next month or so to 4.4.3 so it is up to you if you want to wait for that or flash again.....
Click to expand...
Click to collapse
Thanks for reply. Are these modem flashes reversible? I can always downgrade again, right?
I'll try this over the weekend.
frankxda-dev said:
Thanks for reply. Are these modem flashes reversible? I can always downgrade again, right?
I'll try this over the weekend.
Click to expand...
Click to collapse
I flashed the NC1 modem (twice) and installed Kangakat. Voice works fine but I have no data. I tried setting the telus Access point name and the Telus Mobile Network Operator. After searching networks, it finds Bell, Rogers and Telus. I select Telus and get a Network Registered notification but still no data.
I then flashed MK6 to try and again voice works fine but still no data.
In "About Phone" -> "Status" I always have
Mobile Network State: Disconnected
Edit: I made data work by creating a custom APN instead of relying on the preset APN:
These are the settings I used:
APN: sp.telus.com
No username/password
MMS APN: sp.telus.com
MMSC: http://aliasredirect.net/proxy/mmsc
MMS Proxy: 74.49.0.18:80
I found these settings here: http://www.howardforums.com/showthr...Iphone-5-to-Galaxy-s4?p=15213963#post15213963
The preset APN in Kangakat for telus was
APN: isp.telus.com
but doesn't seem to work.
I tried this using modem MK6 and everything was working: voice and data.
I then flashed NC1 again and data was still working.
Finally I tried a speedtest using the LTE data connection.
5 MB/s down and 2MB/s up.
I have this strange problem where sometimes my modem does not work after a clean flash. Usually just making sure the data network preference is set to LTE solves the issue, and after 10 min or less the phone picks up the band. But I've just done a clean flash teamUB 1/11 and its been 24 hours with no data connection. This same build worked fine for this same phone a week ago, but the 1/19 broke the phone so I had to do a clean wipe and go back to 1/11.
I've played with data roaming options in CDMA roaming mode, set to domestic roaming, national roaming. Still no data
Any advice?
This is for a 900P (sprint) - Note that I am on CREDO (uses Sprint network)
EDIT - FIXED YAY!!! FULL LTE WORKING GREAT!
Reflashing the NKD modem for 5.0 +, with advice here:
http://forum.xda-developers.com/showpost.php?p=58338773&postcount=12
Changing APN/Mobile settings to recommended here:
http://forum.cyanogenmod.org/topic/84151-credo-mobile-4g/#entry430448
Iriez said:
I have this strange problem where sometimes my modem does not work after a clean flash. Usually just making sure the data network preference is set to LTE solves the issue, and after 10 min or less the phone picks up the band. But I've just done a clean flash teamUB 1/11 and its been 24 hours with no data connection. This same build worked fine for this same phone a week ago, but the 1/19 broke the phone so I had to do a clean wipe and go back to 1/11.
I've played with data roaming options in CDMA roaming mode, set to domestic roaming, national roaming. Still no data
Any advice?
This is for a 900P (sprint)
Click to expand...
Click to collapse
Since last time / last week have you flashed any new modems?
lingowistico said:
Since last time / last week have you flashed any new modems?
Click to expand...
Click to collapse
The issue started when I was forced to wipe my system data and do a clean install in order to get the phone functional after boot loop from 1/19 update. so yes, I would assume that the modem built into the 1/11 update I rolled back to (clean install) contained the modem. But, as stated, the 1/11 build was working fine for me before, and not now.
Is there a way to just update the modem itself on this build/phone? I've been wondering about that and wanted to try it if possible.
Iriez said:
The issue started when I was forced to wipe my system data and do a clean install in order to get the phone functional after boot loop from 1/19 update. so yes, I would assume that the modem built into the 1/11 update I rolled back to (clean install) contained the modem. But, as stated, the 1/11 build was working fine for me before, and not now.
Is there a way to just update the modem itself on this build/phone? I've been wondering about that and wanted to try it if possible.
Click to expand...
Click to collapse
There is no modem included in TeamUB's roms.
First thing's first, what model are you using? Go to signature settings and write your model there, this way whoever is helping you they will know what they're dealing with.
lingowistico said:
There is no modem included in TeamUB's roms.
First thing's first, what model are you using? Go to signature settings and write your model there, this way whoever is helping you they will know what they're dealing with.
Click to expand...
Click to collapse
Sorry, I wrote 900P in the first post, I thought that was enough information. I've updated my signature to contain more information.
thanks
Iriez said:
Sorry, I wrote 900P in the first post, I thought that was enough information. I've updated my signature to contain more information.
thanks
Click to expand...
Click to collapse
No need to say sorry man, just mean it makes it easier. Haha you're signature says 900O lol.
1 Install Samsung USB driver for mobile phones
2 Download the NE5 modem one click flasher here
3 Put your phone into download mode (Turn off the device, press Volume Down, Home and Power Buttons simultaneously, Once you see the warning message, release all buttons, Press Volume Up to enter download mode, Now your device should be in download mode)
4 Run the file from #2 and flash modem (if NE5 doesn't help try the other ones).
I don't think it's a modem problem though. IMO it's either the rom or the operator..
lingowistico said:
No need to say sorry man, just mean it makes it easier. Haha you're signature says 900O lol.
1 Install Samsung USB driver for mobile phones
2 Download the NE5 modem one click flasher here
3 Put your phone into download mode (Turn off the device, press Volume Down, Home and Power Buttons simultaneously, Once you see the warning message, release all buttons, Press Volume Up to enter download mode, Now your device should be in download mode)
4 Run the file from #2 and flash modem (if NE5 doesn't help try the other ones).
I don't think it's a modem problem though. IMO it's either the rom or the operator..
Click to expand...
Click to collapse
The NE5 throws a <OSM> MD5 hash value is invalid error. I flashed the ND2 version and no immediate data connection, but from past experience it can take a little while for the modem to sync. No idea what causes the delay, but everytime i flash a new rom it can take sometimes up to 30min before it gets a data connection. Been 15min no connection yet.
Couldnt find a mirror anywhere of that NE5 one click flasher. Know of any other hosts? i googled to no avail.
Iriez said:
The NE5 throws a <OSM> MD5 hash value is invalid error. I flashed the ND2 version and no immediate data connection, but from past experience it can take a little while for the modem to sync. No idea what causes the delay, but everytime i flash a new rom it can take sometimes up to 30min before it gets a data connection. Been 15min no connection yet.
Couldnt find a mirror anywhere of that NE5 one click flasher. Know of any other hosts? i googled to no avail.
Click to expand...
Click to collapse
Try downloading the tar here and flash it in Odin.
lingowistico said:
Try downloading the tar here and flash it in Odin.
Click to expand...
Click to collapse
Update:
I have restored a old backup to kitkat, modem working fine, instant connection. Then I did a system wipe, clean flash to cyanogenmod 1/20 update released yesterday.....no modem. Restored backup again to kitkat, then did a dirty flash to 1/20 cyanogenmod.....no modem.
I think the issue is 5.0 itself. The issue is so random, I do not know how to troubleshoot it. I've installed maybe a dozen CM's so far, and its been a coin toss whether the modem works after install. Sometimes it syncs up after a few min, and sometimes never. its really strange because I had the modem working fine on TeamUB from late december, through 3 or 4 updates until 1/19 boot looped it. Now after that nothing has gotten the data back on other than restoring to kitkat.
When i did the clean install to cyanogenmod, on the startup process where it says 'waiting to activate cellular service' it gets stuck there and never activates the data.
Also, when trying to flash the NE5 tar md5 you linked to, I get md5 error! Binary is invalid. Im supposed to use AP, yes?
EDIT - Changed preferred network type to 3G and after a few reboots got data! Going to change back to LTE now and give it some time to see if i can get it to sync up.
Iriez said:
Update:
I have restored a old backup to kitkat, modem working fine, instant connection. Then I did a system wipe, clean flash to cyanogenmod 1/20 update released yesterday.....no modem. Restored backup again to kitkat, then did a dirty flash to 1/20 cyanogenmod.....no modem.
I think the issue is 5.0 itself. The issue is so random, I do not know how to troubleshoot it. I've installed maybe a dozen CM's so far, and its been a coin toss whether the modem works after install. Sometimes it syncs up after a few min, and sometimes never. its really strange because I had the modem working fine on TeamUB from late december, through 3 or 4 updates until 1/19 boot looped it. Now after that nothing has gotten the data back on other than restoring to kitkat.
When i did the clean install to cyanogenmod, on the startup process where it says 'waiting to activate cellular service' it gets stuck there and never activates the data.
Also, when trying to flash the NE5 tar md5 you linked to, I get md5 error! Binary is invalid. Im supposed to use AP, yes?
EDIT - Changed preferred network type to 3G and after a few reboots got data! Going to change back to LTE now and give it some time to see if i can get it to sync up.
Click to expand...
Click to collapse
No luck leaving it on LTE. When I switch back to 3g I can get a connection, LTE set in preferences I get no connection, not even 3g. I've been testing around the city and at my home, where I can always pickup a LTE connection from past experience.
It seems that the LTE protocol within 5.0 is buggy for my situation. If it works, it seems to work fine, but when it doesnt work, it never works. So its either glass is full or empty
Iriez said:
No luck leaving it on LTE. When I switch back to 3g I can get a connection, LTE set in preferences I get no connection, not even 3g. I've been testing around the city and at my home, where I can always pickup a LTE connection from past experience.
It seems that the LTE protocol within 5.0 is buggy for my situation. If it works, it seems to work fine, but when it doesnt work, it never works. So its either glass is full or empty
Click to expand...
Click to collapse
There are two versions of labels in Odin. The "normal" says "phone" the one I don't like says "CP". You have the Odin I don't like lol, so yours says "CP". That's where you put the modem. "AP" is for firmware/roms only.
Try these two modems, which I found on this page, NK4 for 4.4 while NKD is for 5.0.
Try Ktoosez kernel and also check your Apn settings, it's supposed to be optimised for CDMA phones and might help you.
lingowistico said:
There are two versions of labels in Odin. The "normal" says "phone" the one I don't like says "CP". You have the Odin I don't like lol, so yours says "CP". That's where you put the modem. "AP" is for firmware/roms only.
Try these two modems, which I found on this page, NK4 for 4.4 while NKD is for 5.0.
Try Ktoosez kernel and also check your Apn settings, it's supposed to be optimised for CDMA phones and might help you.
Click to expand...
Click to collapse
Wahooo! Flashing NKD with odin and messing with the APN's has fixed it!!! You rock!
I took a look at ktoosez kernel, what exactly would it bring to me? Always interested in new tools......
Iriez said:
Wahooo! Flashing NKD with odin and messing with the APN's has fixed it!!! You rock!
I took a look at ktoosez kernel, what exactly would it bring to me? Always interested in new tools......
Click to expand...
Click to collapse
Congrats! I'm glad it worked out Ktoonsez mentioned in the CM12 thread that his kernel was optimized for sprint/verizon phones in some way, don't remember what though :silly:
I need some help on my Grand 2. The other day, I had flashed a view ROM's from the Original Development section, and succeed in getting them to work. After a while (my bad for not noticing earlier), I saw that my card seems like it wasn't registered to network (Emergency calls only). Assuming that I did something wrong, I flashed latest 4.4.2 stock using Odin, and noticed that on stock, only Sim 1 is working. After trying out a few stock 4.4.2, and some other ROM, now both sim cards aren't working.
I checked IMEI, and both IMEI are still readable, so I don't think it's EFS issue. And I have also tried to flash modem.bin but it still isn't working. Using Odin to repartition and flash stock also doesn't work.
Does someone here have some experience on this and could point me to the right direction?