The Official Leaked MJ7 build. - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

Does this link of the latest Official MJ7 build apply to us on at&t MF3? Can we flash this using Odin? http://www.kpopstarz.com/articles/4...3-jelly-bean-update-samsung-galaxy-s4-lte.htm
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

That is the update for GT-19505 which is the LTE International version of the S4. Unless you really want to brick your device, go ahead with the odin flash.
The official 4.3 build for the SGH-I337 will come out in a couple of days and I advise you to wait until you get the OTA update for it.
EDIT: Plus this is not a leak, the official MJ7 build for the International versions were released a couple of days ago.

emckai said:
That is the update for GT-19505 which is the LTE International version of the S4. Unless you really want to brick your device, go ahead with the odin flash.
The official 4.3 build for the SGH-I337 will come out in a couple of days and I advise you to wait until you get the OTA update for it.
EDIT: Plus this is not a leak, the official MJ7 build for the International versions were released a couple of days ago.
Click to expand...
Click to collapse
Just as I figured, just wanted to be sure. Really appreciate the quick response. Thanks a lot!
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

troybklyn said:
Does this link of the latest Official MJ7 build apply to us on at&t MF3? Can we flash this using Odin? http://www.kpopstarz.com/articles/4...3-jelly-bean-update-samsung-galaxy-s4-lte.htm
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
A little reading would show you that an MJ6 leak (4.3 specifically for the AT&T SGH-I337) is available and posted in the "General" section. But as the last poster in this thread mentioned, you should wait until the official version is released in a couple of weeks. Flashing the firmware of another phone will guarantee you a brick.
I suggest you read all of the "pinned" threads in the "General" and Q & A sections and then read the first page or two worth of threads in the same sections in order to get a better idea of what it is you should or should not put on your phone before you do anything to it. It doesn't matter what experience you do or do not have with prior phones, it is important to learn about this one specifically if you are going to be modding it or even just using it. Good luck.

I'm on the mj6 leak and its very stable but there are bugs that need to be worked out first. Wait a couple more weeks if you do not care about root and want 4.3 if you can't wait than try the leak out for yourself.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

emckai said:
That is the update for GT-19505 which is the LTE International version of the S4. Unless you really want to brick your device, go ahead with the odin flash.
The official 4.3 build for the SGH-I337 will come out in a couple of days and I advise you to wait until you get the OTA update for it.
EDIT: Plus this is not a leak, the official MJ7 build for the International versions were released a couple of days ago.
Click to expand...
Click to collapse
Maybe it's just me, but I wouldn't be updating via OTA anytime soon. Last thing you need is to go from MF3 w/safestrap to MJ7 wo/safestrap. Might want to wait a bit until someone can have a look at it to make sure it doesn't break anything. Maybe i'm just paranoid though.
Samsung OTA's.........................increasing the value of my MDL phone every time they appear.

Well it all depends on the user of the phone. Maybe he doesn't care about root or custom recovery.

emckai said:
Well it all depends on the user of the phone. Maybe he doesn't care about root or custom recovery.
Click to expand...
Click to collapse
Why come to a development site if you don't care about root or recovery. Or why ask about "leaked" firmware? The phone will update itself to the next firmware as soon as it is available just fine on its own for people that don't care about modding. The problem is that people are interested in root recovery and modding, but unfortunately, they don't take time to read about things before they try them.
So warnings like the ones in this thread about not having root or custom recovery available or what happens when the wrong firmware is flashed to a phone have to keep being repeated again and again.

I am betting that the other problem for those that took the "Leaked MJ6" may have issues updating as well once the OFFICIAL update from ATT comes out. The phone will think it is on the newest firmware at that time and probably won't automatically update. Next will be to see IF we get a OFFICIAL tar of the MJ6 for those that did the MJ6 leak so they can update to a less buggy/bugless version. So to me it would be best to wait for the update if you want MJ6. Or keep MF3 and use safestrap until the OFFICIAL is in a tar format or has a safestrap version.
Look how long it took for someone to upload a MF3 OFFICIAL tar.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337

RockRatt said:
I am betting that the other problem for those that took the "Leaked MJ6" may have issues updating as well once the OFFICIAL update from ATT comes out. The phone will think it is on the newest firmware at that time and probably won't automatically update. Next will be to see IF we get a OFFICIAL tar of the MJ6 for those that did the MJ6 leak so they can update to a less buggy/bugless version. So to me it would be best to wait for the update if you want MJ6. Or keep MF3 and use safestrap until the OFFICIAL is in a tar format or has a safestrap version.
Look how long it took for someone to upload a MF3 OFFICIAL tar.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
Click to expand...
Click to collapse
The problem with MF3 was that there was no leak. All of the files were available to create a TAR except for the bootloader files. You see, once the OTA is dl'd to the phone the bootloader becomes useless to anyone else. The bootloader file(s) have to come from an official firmware source (even if it is a leak of official firmware). It took a leak of the SMART restore MF3 file to obtain the bootloaders. Ofcourse, the SMART leak had all of the files needed so nothing had to be created. Hopefully, the difference with MJ6 is that a leak already exists that includes the official bootloader files. In theory, all that should need to be done is to take the bootloader files from the leak and put them with the OTA files from the official OTA (before it is installed to the phone) and then create the Odin-able TAR file. Basically, creating an official TAR for the AT&T 4.3 release. This all assumes that the official OTA doesn't include a method to block the leakes MJ6 bootloader files...basically, a double q-fuse increment situation. I don't see that happening. In the past, leaked firmware updates have always had compatible bootloader files with their official counterparts. but anything is possible. This should be all we need. Of course, another SMART leak of the 4.3 SMART files would always help. Also, if 4.3 becomes available for the the AT&T version via KIES3, it should be possible to pull the needed files from it, but MF3 was not available, maybe 4.3 won't be either.

Related

4.3 update

Newbie here. I rooted the S4 a couple of months ago. Now that 4.3 is out, can experts post some step-by-step guide on how to upgrade it on rooted devices? Thanks.
Are you sure you want to update? Why not just flash a 4.3.1 rom to your device instead and stock to AMDL firmware.
However if it hasn't manually updated to MF3 you can go into your settings and search for updates, or it should automatically update on it's own. The only thing that would prevent it would be if you've flashed a non TW based ROM, changed the framework + kernel, or froze there processes needed to update. Just a stand alone root won't prevent it.
Sent from my SGH-I337 using XDA Premium 4 mobile app
I am not on MF3. I tried to install the AT&T minor update before, but it failed twice. I did freeze some stock apps. If I unfreeze those apps, the automatic update should work then? That's very good to know. Thanks!
Br4nd3n said:
Are you sure you want to update? Why not just flash a 4.3.1 rom to your device instead and stock to AMDL firmware.
However if it hasn't manually updated to MF3 you can go into your settings and search for updates, or it should automatically update on it's own. The only thing that would prevent it would be if you've flashed a non TW based ROM, changed the framework + kernel, or froze there processes needed to update. Just a stand alone root won't prevent it.
Sent from my SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just to be clear you never got/took the OTA update to mf3?
If you still have the mdl bootloader then you will be able to update to a new rom that is based off the new att firmware MJ6 soon. I would wait until a good rom is out to flash rather than getting any OTA update. Once you go to mf3 firmware you cannot go back to a previous firmware and you are limited on what can be flashed to your phone. If you take the new OTA (whenever att actually releases it) you will be stuck on that firmware and not able to go back to a previous firmware.
So like in my situation I have the mdb or mdl bootloader still, rooted, and I can flash any rom I want whether it is a mdl/mf3/ international firmware/ or when available the MJ6 firmware. All of this is harder/not able to do if you ever get OTA updates.
Sent From My Spiderman Themed I337
I never got the MF3 update. As I mentioned, I did try it twice, but the update failed, either because I froze some apps, or because I installed the CWM custom recovery. It's good to hear that it is actually a good thing. I noticed that the 4.3 firmware is out (the general forum), should I just install that one? How should I start? Thanks.
RockRatt said:
Just to be clear you never got/took the OTA update to mf3?
If you still have the mdl bootloader then you will be able to update to a new rom that is based off the new att firmware MJ6 soon. I would wait until a good rom is out to flash rather than getting any OTA update. Once you go to mf3 firmware you cannot go back to a previous firmware and you are limited on what can be flashed to your phone. If you take the new OTA (whenever att actually releases it) you will be stuck on that firmware and not able to go back to a previous firmware.
So like in my situation I have the mdb or mdl bootloader still, rooted, and I can flash any rom I want whether it is a mdl/mf3/ international firmware/ or when available the MJ6 firmware. All of this is harder/not able to do if you ever get OTA updates.
Sent From My Spiderman Themed I337
Click to expand...
Click to collapse
wxiao said:
I never got the MF3 update. As I mentioned, I did try it twice, but the update failed, either because I froze some apps, or because I installed the CWM custom recovery. It's good to hear that it is actually a good thing. I noticed that the 4.3 firmware is out (the general forum), should I just install that one? How should I start? Thanks.
Click to expand...
Click to collapse
What until one of the devs creates a flashable zip that you can flash in cwm. It'll probably be only a couple of days now that the leak is out.

SGH-I337 AT&T 4.2.2 MF3 Rooted (Motochopper) - best route to AT&T 4.3?

Hi all,
My Google-fu is failing me and I'm not certain of the best route to take a Galaxy S4 SGH-I337 AT&T 4.2.2 MF3 (Rooted with Motochopper) up to the new AT&T 4.3 firmware.
Can anyone point me in the direction of a guide for doing this? Everything I'm reading seems like I'll have to sacrifice my root, flash to stock with Odin, and then wait for AT&T to re-release the OTA update to 4.3. Am I off base?
Motochopper cannot root MF3. We're you able to hold root when you upgraded and are hoping to keep root again?
At the moment yes you will have to sacrifice root. I did. Root keeper does not support android 4.3 and keeping with SuperSU does not work either.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
CAG-man said:
Motochopper cannot root MF3. We're you able to hold root when you upgraded and are hoping to keep root again?
At the moment yes you will have to sacrifice root. I did. Root keeper does not support android 4.3 and keeping with SuperSU does not work either.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
My phone is still rooted at this moment, though I'm on 4.2.2. I haven't upgraded anything yet. I was hoping there was a custom rom or something I could flash to get to 4.3 and retain root.
I'm just gonna wait until a stock 4.3 rom comes out that supports safestrap so I can keep root
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
mrpeters said:
My phone is still rooted at this moment, though I'm on 4.2.2. I haven't upgraded anything yet. I was hoping there was a custom rom or something I could flash to get to 4.3 and retain root.
Click to expand...
Click to collapse
Since you are rooted with a custom recovery you CAN flash 4.3 now without losing root. Just use ShoStock-i MJ9 4.3http://forum.xda-developers.com/showthread.php?t=2468860
Or VisionX MJ9 4.3 http://forum.xda-developers.com/showthread.php?t=2391142
Or Deadly Venom MJ9 4.3 http://forum.xda-developers.com/showthread.php?t=2503692
and POSSIBLY a couple other 4.3 Touchwiz firmwares that are found in the Android Development Section
These are all from he International MJ9 firmwares but to me are better than the ATT firmwares for 4.3. The ATT 4.3 removed the Data Toggle completely from the pulldown menu and now you have to go into settings each time to turn it on or off. Plus other changes that are solely LACKING compared to the international firmwares. I have tried two of the above and they are both great and the third from what I have read works great as well. They are all great devs. Try them out and I suggest using the Jeboo 3.0 kernel for best results.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
I concur with RockRatt. Shostock-I is smooth. It is bundled with jeboos 3.0 kernel. Love it. Biased, though. I've been using Sho's roms since my/his s2 days..
Sent from my TARDIS
If "mrpeters" is MF3 he can't and shouldn't try flashing a 4.3 rom cause our MF3 Safestrap don't support it at the moment.
Sent from my ATT S4 MF3 using Tapatalk
mrpeters said:
Hi all,
My Google-fu is failing me and I'm not certain of the best route to take a Galaxy S4 SGH-I337 AT&T 4.2.2 MF3 (Rooted with Motochopper) up to the new AT&T 4.3 firmware.
Can anyone point me in the direction of a guide for doing this? Everything I'm reading seems like I'll have to sacrifice my root, flash to stock with Odin, and then wait for AT&T to re-release the OTA update to 4.3. Am I off base?
Click to expand...
Click to collapse
mrpeters said:
My phone is still rooted at this moment, though I'm on 4.2.2. I haven't upgraded anything yet. I was hoping there was a custom rom or something I could flash to get to 4.3 and retain root.
Click to expand...
Click to collapse
jball said:
If "mrpeters" is MF3 he can't and shouldn't try flashing a 4.3 rom cause our MF3 Safestrap don't support it at the moment.
Sent from my ATT S4 MF3 using Tapatalk
Click to expand...
Click to collapse
I only gave the advice above because he said he is ROOTED WITH MOTOCHOPPER ON MF3. As we know MF3 cannot be rooted with motochopper. So I was guessing that he rooted while on MDL or MDB with motochopper and used a ROM to upgrade to MF3.
So unless he is/was mistaken with those comments and he meant to say rooted on MF3 with safestrap then I would of told him to look at the safestrap threads.
Hopefully he clears things up with that as I WON'T want to give him Bad Advice.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
I didn't quote anybody for a reason.just stating facts based on my reading the OP post.its all good
Sent from my ATT S4 MF3 using Tapatalk
Yea there's a difference between having a phone shipped with MF3 and having upgraded to MF3
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
My phone stock was MDL and I took the OTA to MF3.
MF3 is MF3
Every time I read a thread anyone starts I also read the profiles of all the people in the threads posted.no clear mention of his base in his profile
Sent from my ATT S4 MF3 using Tapatalk
My phone was not MF3 stock. It got upgraded sometime after I rooted. To be completely honest, I'm not sure how. Kies maybe?
All I know is I still have root If I have to wait where I'm at, no big deal!
mrpeters said:
My phone was not MF3 stock. It got upgraded sometime after I rooted. To be completely honest, I'm not sure how. Kies maybe?
All I know is I still have root If I have to wait where I'm at, no big deal!
Click to expand...
Click to collapse
well my touch screen has stopped working, so now this phone gets to go back to AT&T for repairs.
whats the best way to remove root and factory default it?
sorry to bump an old thread, but I wanted to see if anything had changed so I could upgrade from my rooted 4.2.2 I337UCUAMF3 to one of the newer OS versions that are out. This phone was a warranty replacement, but I had no trouble rooting it with Motochopper when I got it so I don't think it came stock with MF3, but its been 6 months so I can't say for certain.
mrpeters said:
sorry to bump an old thread, but I wanted to see if anything had changed so I could upgrade from my rooted 4.2.2 I337UCUAMF3 to one of the newer OS versions that are out. This phone was a warranty replacement, but I had no trouble rooting it with Motochopper when I got it so I don't think it came stock with MF3, but its been 6 months so I can't say for certain.
Click to expand...
Click to collapse
You could flash the md3 tar and return it to stock. Then let out update itself. You'll lose root and you'll want to read some of the threads on the general section dealing with mk2 and nb1 before you do so so you know what you're getting in to
Sent from my SAMSUNG-SGH-I727
jd1639 said:
You could flash the md3 tar and return it to stock. Then let out update itself. You'll lose root and you'll want to read some of the threads on the general section dealing with mk2 and nb1 before you do so so you know what you're getting in to
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
10-4. I don't want to lose root, so that's key. I should have clarified that. I use too many apps (LightFlow, NoBloat, Titanium, etc.) that I wouldn't want to give up.
mrpeters said:
10-4. I don't want to lose root, so that's key. I should have clarified that. I use too many apps (LightFlow, NoBloat, Titanium, etc.) that I wouldn't want to give up.
Click to expand...
Click to collapse
You could flash 4.3 MK2 with odin then root with saferoot.
The 4.3 tar can be found here http://d-h.st/wH3 The pit here http://d-h.st/5gz
Saferoot can be found here http://forum.xda-developers.com/showthread.php?t=2565758
jball said:
My phone stock was MDL and I took the OTA to MF3.
MF3 is MF3
Every time I read a thread anyone starts I also read the profiles of all the people in the threads posted.no clear mention of his base in his profile
My MDL updated itself when I went back to stock and forgot to disable OTA. Now that I'm locked into TW, is there a reason NOT to update to MK2? I know that it will install KNOX but with saferoot and safestrap, I'll have the same functionality of my rooted MF3?
Click to expand...
Click to collapse
I am at the same place in my phone. Were you ever able to update to 4.3 I need to do the same to have access to certain options and apps

Latest Update for AT&T I337?

I need latest update for Samsung Galaxy S4 AT&T I337 model as I live outside USA and for some reason when I click on Software Update (Settings -> About device) nothing happens.
Below is the details for Samsung Galaxy S4 AT&T I337 phone
Model Number - SAMSUNG-SGH-I337
Android Version - 4.3
Baseband version - I337UCUAMDL
Kernel version - 3.4.0_StockUp_tw_4.3
Build Number - StockUp MJ6 v1.1
I need some guidance on how I can update my phone to the latest updates that is available for AT&T I337 model
Look forward to getting some tips and guidance on this matter
Search for mk2 tar files
jd1639 said:
Search for mk2 tar files
Click to expand...
Click to collapse
I found the required file from this forum which was redirected to another download site as shown below
http://www.androidfilehost.com/?fid=23329332407566574
Do you I use the following instructiuon that is found in this forum
http://forum.xda-developers.com/showthread.php?t=2621279
1.POWER OFF YOUR PHONE AND GO TO DOWNLOAD/ODIN MODE ( VOLDOWN+HOME+POWER)
2.DOWNLOAD ODIN (http://forum.xda-developers.com/attachment.php?attachmentid=2537619&d=1390629800) AND MAKE SURE U HAVE THE LATEST DRIVER INSTALL FROM SAMSUNG KIES
3.DOWNLOAD AND EXTRACT I337MK2_Combined_Odin_Tar FILES
4.START ODIN AND FOLLOW IN ORDER WHERE EACH FILE SHOULD GO INTO ODIN SLOT....
I need confirmation if the above instruction is correct to get the latest update for Samsung Galaxy S4 AT&T i337 model?
You're currently on mdl firmware. This firmware allows you to put on a custom recovery and flash roms. Are you sure you want to update? You will no longer have the ability to put on a custom recovery.
jd1639 said:
You're currently on mdl firmware. This firmware allows you to put on a custom recovery and flash roms. Are you sure you want to update? You will no longer have the ability to put on a custom recovery.
Click to expand...
Click to collapse
Well not interested in custom recovery as long as I get the latest update that looks like offical Samsung Galaxy S4 updates for i337 model. Will I be getting latest update for future updates?
userS4i337 said:
Well not interested in custom recovery as long as I get the latest update that looks like offical Samsung Galaxy S4 updates for i337 model. Will I be getting latest update for future updates?
Click to expand...
Click to collapse
Yes to all your question.....i337MK2 tar md5 contain 4 seperated files ( first released ) follow the image guide where u have to place into ODIN SLOT ....the one that said combined ALL IN ONE ( newest released ) mean that u just flash into PDA ODIN SLOT ONLY.....just follow that guide on second post it would get u to latest ATT MK2 4.3 firmware. But like @jd1639 said with MDL firmware u can install anything even 4.4.2 rom and also there is alot of custom stock rom without ATT bloatware out there that u can install .....goodluck and PM me if u need more help. FYI if u got helped by someone please hit THANK button to show your appreciation ....:good::good:
I'll update my S4 to the latest update and you can send me yours. I'd kill for mdl firmware...
Sent from my SAMSUNG-SGH-1337 using Tapatalk
That is my another question regarding ATT bloatware? Will the combined TAR file contain the ATT bloatware?
Is there a way I can remove the ATT bloatware after I have upgraded the phone, as I find the ATT bloatware annoying
userS4i337 said:
That is my another question regarding ATT bloatware? Will the combined TAR file contain the ATT bloatware?
Is there a way I can remove the ATT bloatware after I have upgraded the phone, as I find the ATT bloatware annoying
Click to expand...
Click to collapse
Yes it contains all the bloatware, another reason not to upgrade and flash custom roms.
Edit, it has not been mentioned yet but one you upgrade you can not go back to a previous firmware.
When I upgrade to MK2, does this mean I will need to perform factory reset and all my existing app will be gone or will the app remain on the phone even after the upgrade.
I will do the backup before the upgrade but at the moment when I connect the Phone to the PC, it would mot pick up so maybe I will need the latest software driver, is that correct? I have the same problem with Kies which does not recognise when phone is connected.
Any suggestion would be great.
userS4i337 said:
When I upgrade to MK2, does this mean I will need to perform factory reset and all my existing app will be gone or will the app remain on the phone even after the upgrade.
I will do the backup before the upgrade but at the moment when I connect the Phone to the PC, it would mot pick up so maybe I will need the latest software driver, is that correct? I have the same problem with Kies which does not recognise when phone is connected.
Any suggestion would be great.
Click to expand...
Click to collapse
When you Odin I believe you lose everything anyway.
rbedell said:
When you Odin I believe you lose everything anyway.
Click to expand...
Click to collapse
Not always, most times a factory reset is needed to clear the phone of old apps and data. Root, is lost, but apps that require root can still be present which can become a problem when root is no longer available.
A friend of mine has a rooted MDL firmware s4 and wants a rooted stock version of the latest update. Can someone please provide a link to the latest flashable stock ROM for the att s4? Thanks.
Sent from my Nexus 5 using xda app-developers app
Henrock11 said:
A friend of mine has a rooted MDL firmware s4 and wants a rooted stock version of the latest update. Can someone please provide a link to the latest flashable stock ROM for the att s4? Thanks.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Why doesn't your friend flash a custom rom instead
He wants a stock touchwiz ROM. If their is a custom ROM based on the latest firmware then by all means direct me to it and I'll flash that for him. Thanks.
Sent from my Nexus 5 using xda app-developers app
Henrock11 said:
He wants a stock touchwiz ROM. If their is a custom ROM based on the latest firmware then by all means direct me to it and I'll flash that for him. Thanks.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
He's on mdl which allows a custom recovery and easy flashing of roms. If he upgrades to mk2, the latest, he'll lose that ability. Try this http://forum.xda-developers.com/showthread.php?p=47713264
Right, we have a custom recovery and an unlocked boot loader and I flashed an older build of that Google edition ROM, but he just really wants the ability to move his apps2sd. I didn't see a mention of the apps2sd feature in the change logs. Thanks for replying so quickly.
Sent from my Nexus 5 using xda app-developers app

[Q] MDL Firmware

Currently have a AT&T S4 rooted with MDL firmware. I have flashed other 4.3 loki roms without any problems (using Goldeneye 20 now). From the reading that I have done on the forums, it is my understanding that certain roms require a newer firmware version, for example, Hyperdrive. Is that a correct statement? If so, will that continue to be the trend with later releases? Can anyone provide any additional information to help me understand this better? Thanks in advance!
beefwilliams said:
Currently have a AT&T S4 rooted with MDL firmware. I have flashed other 4.3 loki roms without any problems (using Goldeneye 20 now). From the reading that I have done on the forums, it is my understanding that certain roms require a newer firmware version, for example, Hyperdrive. Is that a correct statement? If so, will that continue to be the trend with later releases? Can anyone provide any additional information to help me understand this better? Thanks in advance!
Click to expand...
Click to collapse
For MDL, that does not apply. Basically people with MF3+ phones need to upgrade to 4.3 to have 4.3 ROMs. All you need to do is continue to use loki and never upgrade your bootloaders.
DeadlySin9 said:
For MDL, that does not apply. Basically people with MF3+ phones need to upgrade to 4.3 to have 4.3 ROMs. All you need to do is continue to use loki and never upgrade your bootloaders.
Click to expand...
Click to collapse
Unless he wants a 4.4.2 rom then he needs the new bootloader....which is locked! so stay away of 4.4.2 for now
Flashing roms (unless stated by OP) will not update your bootloader correct? Since I am one of the lucky ones to have the MDL, I don't want to jeopardize it.
daraj said:
Unless he wants a 4.4.2 rom then he needs the new bootloader....which is locked! so stay away of 4.4.2 for now
Click to expand...
Click to collapse
Not true, he can flash a 4.4.2 ROM with the MDL bootloader as long as he gets a loki 4.4.2 kernel. Otherwise the 4.4.2 Google Edition thread wouldn't get much attention
beefwilliams said:
Flashing roms (unless stated by OP) will not update your bootloader correct? Since I am one of the lucky ones to have the MDL, I don't want to jeopardize it.
Click to expand...
Click to collapse
Flashing ROMs will not touch your bootloaders. Just never take any OTA updates to the stock ROM, and never ODIN any firmware except MDL. OTA updates on custom ROMs will only work in some cases (GE doesn't because they're ported from a different model, Hyperdrive will because it has a specialized system).
I'm MDL on 4.2.2, how did you upgrade to 4.3 but keep your MDL?
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Wittyusernametaken said:
I'm MDL on 4.2.2, how did you upgrade to 4.3 but keep your MDL?
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
You can use the StockUp ROM, it's just MK2 with bloat removed and you can even flash the bloat back on if you want.
DeadlySin9 said:
You can use the StockUp ROM, it's just MK2 with bloat removed and you can even flash the bloat back on if you want.
Click to expand...
Click to collapse
Interesting yeah, no bloat love here, I've got a metric ton of it frozen with Titanium. I was thinking that the only thing I could try was http://forum.xda-developers.com/showthread.php?t=2356276 . I haven't actually flashed any roms yet, only rooted and have twrp. Thank you for the info
I'm on MDL firmware (AT&T) running Hyperdrive RSL13 with KTs kernel. I've had 4.2.2 and 4.4.2 roms on this phone. You can bounce around with no problem. My recovery auto lokis...using shabby penguins recovery.

[Request] Update from NB1 to NC1

currently I am outside us i want NC1 Frimware to upgrade with out rooting my device
ٍSorry i but it on wrong place i want to move it to question sections i am sorry for that
The NC1 update is provided by your carrier. You should just be able to do a check for updates on your device and it'll find it. Please know that it's a very recent update and not much is known about how it affects custom ROMs or the rooting process. I updated to it and I'm waiting to see what the experts here say.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
5erv0 said:
The NC1 update is provided by your carrier. You should just be able to do a check for updates on your device and it'll find it. Please know that it's a very recent update and not much is known about how it affects custom ROMs or the rooting process. I updated to it and I'm waiting to see what the experts here say.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
My carrier is At&t and they don't allow any update out the US
There was another thread I posted this to but for some reason the OP wanted the thread deleted.
So here is the link to the file I was pushed.
https://mega.co.nz/#!oYp13KoL!iM-Wr_M4ix22OeLw6cne0G1WXH7BjuN9i0Fr995G6lQ
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
0o0nano0o0 said:
My carrier is At&t and they don't allow any update out the US
Click to expand...
Click to collapse
Currently living in Japan and my i337 took the 4.3 and 4.4 updates just fine prior to rooting.
Sent from my SGH-I337 using XDA Premium 4 mobile app
0o0nano0o0 said:
currently I am outside us i want NC1 Frimware to upgrade with out rooting my device
ٍSorry i but it on wrong place i want to move it to question sections i am sorry for that
Click to expand...
Click to collapse
I honestly do not trust the update and I will explain. I believe the update was pushed to prevent us, the custom ROM users, from downgrading back to mf3. We all know that in mf3 there is an exploit where we can change the kernel inside the memory or something like that. I am rooted on nb1 and am running a bootloader that lets me downgrade back to mf3. It would make sense to me that they are trying to prevent that exploit. I know they probably fix a stability issue or something but I would not flash to nc1 if you don't want custom roms here in the near future.
braindead444 said:
I honestly do not trust the update and I will explain. I believe the update was pushed to prevent us, the custom ROM users, from downgrading back to mf3. We all know that in mf3 there is an exploit where we can change the kernel inside the memory or something like that. I am rooted on nb1 and am running a bootloader that lets me downgrade back to mf3. It would make sense to me that they are trying to prevent that exploit. I know they probably fix a stability issue or something but I would not flash to nc1 if you don't want custom roms here in the near future.
Click to expand...
Click to collapse
We could never downgrade to mf3, only a partial downgrade to MK2 from nb1. And jeboo already said the nc1 bootloader does not increment the q fuse counter so you can still go back to nb1 if you want...
braindead444 said:
I honestly do not trust the update and I will explain. I believe the update was pushed to prevent us, the custom ROM users, from downgrading back to mf3. We all know that in mf3 there is an exploit where we can change the kernel inside the memory or something like that. I am rooted on nb1 and am running a bootloader that lets me downgrade back to mf3. It would make sense to me that they are trying to prevent that exploit. I know they probably fix a stability issue or something but I would not flash to nc1 if you don't want custom roms here in the near future.
Click to expand...
Click to collapse
dmc2359 said:
We could never downgrade to mf3, only a partial downgrade to MK2 from nb1. And jeboo already said the nc1 bootloader does not increment the q fuse counter so you can still go back to nb1 if you want...
Click to expand...
Click to collapse
On top of that, the exploit is at the kernel level. We can still get the MK2 kernel so we can still get the exploit. That's why bypasslkm still works on the downgrade.
Sent from my SGH-I337 running Blackbox 3.0
I was Odining back to stock MK2 and after it was finished I set it up then went outside real quick. Came back and phone said it was updated to this NC1 firmware and this happens when looks like potential progress on the "serious about unlocking bootloader" thread f u ATT.
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Thread moved :good:
raulz28 said:
I was Odining back to stock MK2 and after it was finished I set it up then went outside real quick. Came back and phone said it was updated to this NC1 firmware and this happens when looks like potential progress on the "serious about unlocking bootloader" thread f u ATT.
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Click to expand...
Click to collapse
Don't worry, chances are exploits will function still if one is found, and if Hashcode implements kexec you'll still be fine.
0o0nano0o0 said:
My carrier is At&t and they don't allow any update out the US
Click to expand...
Click to collapse
I think you should be able to connect through a proxy and download the update over wifi that way. Note that the update will only work over WiFi... not mobile data. I hope you get it worked out.
CAG-man said:
There was another thread I posted this to but for some reason the OP wanted the thread deleted.
So here is the link to the file I was pushed.
https://mega.co.nz/#!oYp13KoL!iM-Wr_M4ix22OeLw6cne0G1WXH7BjuN9i0Fr995G6lQ
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sir,
Download the OTA package I337UCUFNC1 19MB Zip File
This Link Not Working : https://mega.co.nz/#!oYp13KoL!iM-Wr_M4ix22OeLw6cne0G1WXH7BjuN9i0Fr995G6lQ
Unavailable To Download
Plz Give Fresh Link :
Plz Upload Official NC1 Update 19MB ... I Can't Download Plz Upload Another Link I Need Sir
Plz Help Me :crying:

Categories

Resources