Related
Hey guys, been looking through the forum all morning at different ROM's. I considered the KK upgrade, however can't find a working link to a DL, my telco still have not released the KK update.
I have N9005 model, on 4.3 rooted using Chainfire, have CWM. I DL a 4.3 ROM, but can't figure out how to get it on my phone from PC (I sent the zip file over, but it does not show up on CWM), I found a few KK ROMS that interest me, but can't find a working link to a DL of 4.4.2 it for me to flash. I would post in the respective thread, but I cn't post in the developer forums yet.
As I understand to do most roms on here now, I need to flash 4.4.2, Root it, install new version of CWM, then install the rom.
However if I have used CWM to do a nandroid backup, is it possible to flash it back to that, or is any chance of 4.3 gone once I flash 4.4
I know this is very noob, but we all gotta learn some day.
Any help, even a link to 4.4.2 DL would be awesome.
Spudz30 said:
Hey guys, been looking through the forum all morning at different ROM's. I considered the KK upgrade, however can't find a working link to a DL, my telco still have not released the KK update.
I have N9005 model, on 4.3 rooted using Chainfire, have CWM. I DL a 4.3 ROM, but can't figure out how to get it on my phone from PC (I sent the zip file over, but it does not show up on CWM), I found a few KK ROMS that interest me, but can't find a working link to a DL of 4.4.2 it for me to flash. I would post in the respective thread, but I cn't post in the developer forums yet.
As I understand to do most roms on here now, I need to flash 4.4.2, Root it, install new version of CWM, then install the rom.
However if I have used CWM to do a nandroid backup, is it possible to flash it back to that, or is any chance of 4.3 gone once I flash 4.4
I know this is very noob, but we all gotta learn some day.
Any help, even a link to 4.4.2 DL would be awesome.
Click to expand...
Click to collapse
First thing, if you go to KK you can't come back. Nobody has yet found a way to reset Knox or to revert the bootloader from KK. Go to it and you're stuck with it. May not matter depending on how you use your phone but there's a thread on here where the poster actually got his phone replaced because KK update meant he could no longer use it as he wanted and as he had it set up under 4.3.
(see http://forum.xda-developers.com/showthread.php?t=2709623 )
You've already tripped Knox using Chainfire's autoroot so you're free to do pretty much whatever you wish. I have stayed with 4.3, using Alliance ROM, Philz recovery and Lean kernel because the phone is awesome using them and KK seems to be generating lots of problems even now and doesn't appear to offer anything really worth having to make up for the troubles... IMO.
If you can't see the zip in CWM the most likely reason is you're looking at the wrong 'card' - in Philz recovery for example, the external SD card is SDCard1, not SDCard. At a guess you have copied the zip to the external card and CWM is looking on the internal memory.Not sure what the options are for plain CWM but look for another card option or move the zip from where you have it. Given the best flash is to wipe everything on the internal memory, the external card is the best location - it won't be wiped.
Another way to do it is to use Odin - extract the zip till you get the MD5 file and flash that via Odin to the phone - you need to put the phone in Download mode to do it. (hold Menu + Vol Down + Power to get to DL mode) There are threads on here with instructions on how to use Odin.
Journyman16 said:
First thing, if you go to KK you can't come back. Nobody has yet found a way to reset Knox or to revert the bootloader from KK. Go to it and you're stuck with it. May not matter depending on how you use your phone but there's a thread on here where the poster actually got his phone replaced because KK update meant he could no longer use it as he wanted and as he had it set up under 4.3.
(see http://forum.xda-developers.com/showthread.php?t=2709623 )
You've already tripped Knox using Chainfire's autoroot so you're free to do pretty much whatever you wish. I have stayed with 4.3, using Alliance ROM, Philz recovery and Lean kernel because the phone is awesome using them and KK seems to be generating lots of problems even now and doesn't appear to offer anything really worth having to make up for the troubles... IMO.
If you can't see the zip in CWM the most likely reason is you're looking at the wrong 'card' - in Philz recovery for example, the external SD card is SDCard1, not SDCard. At a guess you have copied the zip to the external card and CWM is looking on the internal memory.Not sure what the options are for plain CWM but look for another card option or move the zip from where you have it. Given the best flash is to wipe everything on the internal memory, the external card is the best location - it won't be wiped.
Another way to do it is to use Odin - extract the zip till you get the MD5 file and flash that via Odin to the phone - you need to put the phone in Download mode to do it. (hold Menu + Vol Down + Power to get to DL mode) There are threads on here with instructions on how to use Odin.
Click to expand...
Click to collapse
I will stick with JB for now as I like my setup anyway. I know how odin works and CWM was definitely looking at my External SD as my backup was on it. This is the ROM I was trying http://forum.xda-developers.com/showthread.php?t=2541304 I DL, extracted to a folder on my PC, put onto my micro SD, but alas, nothing to choose from to flash.
Found the Alliance one for N9005, looks real nice, so will give it a shot.
Deleted
Urghhhh why is it after hours of trawling and googling I can't find my answer. I did the alliance ROM (and now know how my first rom stuffed up) how do I get rid of the icon in the top left which shows download rate? Can't find the option anywhere on phone
Edited: Found it myself.
Final bit of noob from me for now. I tried to restore my CWM backup after installing Alliance, alliance overwrote CWM with TWRP, I did a factory reset, but could not restore from backup. It noted my CWM backup, but I could not restore it. Anything I did wrong here?
Edited: Once again from learning I fixed my own issue. Reflashed CWM, restored from todays backup, phone has gone from factory reset to how it was earlier today. Love the nandroid backup.
I know I am stupid, but I am trying to just get this phone to work. I did try and search for something that would come close to what I am encountering, but so far I can't find anything that would suggest a possible workaround. So, I hope this is in line with the rules, if not, please let me know and I will remove this myself pronto.
I was on 4.3 (MK2), rooted with TWRP and installed Xposed, all was fine and well, until AT&T decided to attack my phone to "remind" me to update to a newer version. After a few weeks I finally gave in, and knowing that I have somewhat heavily modified this phone, I went ahead and disable and uninstall Xposed, then head on to try and flash NC1 onto this phone via TWRP 3.72.
I was following this post, using post#3, and all was well, expect when I tried to flash AP using Odin, it was late and I failed to catch the fact Odin didn't connect my phone, so I guess the kernel didn't update. Then I went ahead and try booting it up. It got to the AT&T globe logo, only it has orange strips instead of blue. I waited maybe 15 mins for it to boot, and upon thinking it is not working, I pulled the battery and went into recovery and found I had a very early version backup, which I then restored that. It did boot! But the wifi wouldn't turn on, so I went and checked, the baseband was on NC1, but everything else is at MK2 (4.3). At that point, I give up and went to bed.
This morning, after giving it some good thoughts and research, I tried to Odin again, and this time I succeed, Odin recognizes my phone, and it flash the AP as it should. But when I try boot it up, it would only get to "safestrap disabled" and then black screen. After that, I can only get into the custom recovery, but no matter what I try, full/advance wipe, install, it would show something like "E: cannot mount system" so no matter what ROM I downloaded, it would not install, and when I try and re-boot, it would warn me that there is " No System"
So my question now is: since I can still see and access recovery, not all hope is lost, but since this is a work phone, I do need it back up and running, and I need it fast. How should I proceed from here? I tried straight flash a GPE ROM from here, but it would still run into the error of "E: cannot mount system" and trying to wipe/advance wipe would not work either.
If anyone has any idea what kind of problems I am running into, I am all ears to hear and try my best to get my work phone back up and running. Thank you all for taking you time to read, think and maybe help.
iantung329 said:
I know I am stupid, but I am trying to just get this phone to work. I did try and search for something that would come close to what I am encountering, but so far I can't find anything that would suggest a possible workaround. So, I hope this is in line with the rules, if not, please let me know and I will remove this myself pronto.
I was on 4.3 (MK2), rooted with TWRP and installed Xposed, all was fine and well, until AT&T decided to attack my phone to "remind" me to update to a newer version. After a few weeks I finally gave in, and knowing that I have somewhat heavily modified this phone, I went ahead and disable and uninstall Xposed, then head on to try and flash NC1 onto this phone via TWRP 3.72.
I was following this post, using post#3, and all was well, expect when I tried to flash AP using Odin, it was late and I failed to catch the fact Odin didn't connect my phone, so I guess the kernel didn't update. Then I went ahead and try booting it up. It got to the AT&T globe logo, only it has orange strips instead of blue. I waited maybe 15 mins for it to boot, and upon thinking it is not working, I pulled the battery and went into recovery and found I had a very early version backup, which I then restored that. It did boot! But the wifi wouldn't turn on, so I went and checked, the baseband was on NC1, but everything else is at MK2 (4.3). At that point, I give up and went to bed.
This morning, after giving it some good thoughts and research, I tried to Odin again, and this time I succeed, Odin recognizes my phone, and it flash the AP as it should. But when I try boot it up, it would only get to "safestrap disabled" and then black screen. After that, I can only get into the custom recovery, but no matter what I try, full/advance wipe, install, it would show something like "E: cannot mount system" so no matter what ROM I downloaded, it would not install, and when I try and re-boot, it would warn me that there is " No System"
So my question now is: since I can still see and access recovery, not all hope is lost, but since this is a work phone, I do need it back up and running, and I need it fast. How should I proceed from here? I tried straight flash a GPE ROM from here, but it would still run into the error of "E: cannot mount system" and trying to wipe/advance wipe would not work either.
If anyone has any idea what kind of problems I am running into, I am all ears to hear and try my best to get my work phone back up and running. Thank you all for taking you time to read, think and maybe help.
Click to expand...
Click to collapse
Are you sure you have Safestrap 3.72? It should be working if you do. Either way, try flashing the MK2 AP file/kernel from the downgrade thread or the KitKat Toolkit. That should guarantee it mounts and then you can try again. If that doesn't work, you might just have to ODIN NB1 and start from the downgrade.
DeadlySin9 said:
Are you sure you have Safestrap 3.72? It should be working if you do. Either way, try flashing the MK2 AP file/kernel from the downgrade thread or the KitKat Toolkit. That should guarantee it mounts and then you can try again. If that doesn't work, you might just have to ODIN NB1 and start from the downgrade.
Click to expand...
Click to collapse
I am now just trying to boot up the phone to check, and right now it is stuck at the Samsung Custom lock (white). So I guess either Odin NB1 or MK2 and start from there?
The only thing I think its odd is, it keeps telling me that it can't mount the system, and I can't for the live of me figure why that would even happen....
iantung329 said:
I am now just trying to boot up the phone to check, and right now it is stuck at the Samsung Custom lock (white). So I guess either Odin NB1 or MK2 and start from there?
The only thing I think its odd is, it keeps telling me that it can't mount the system, and I can't for the live of me figure why that would even happen....
Click to expand...
Click to collapse
If you had not taken the OTA from AT&T your phone bootloader is still on MK2.
Did you flash NC1 before or after you received OTA from AT&T.
sway8966 said:
If you had not taken the OTA from AT&T your phone bootloader is still on MK2.
Did you flash NC1 before or after you received OTA from AT&T.
Click to expand...
Click to collapse
I was not able to take the OTA from AT&T, due to that it was rooted and Xposed, so somehow the system check would backfire. When I got the phone, it was on MK2, and I only rooted it and installed custom recovery, for I only need to be able to delete some stuff at will, thus, the root access.
Actually, since I can't boot pass the Samsung custom lock, is it still possible to use Odin? I would have thought Odin would not recognize the phone since it is not on.....
iantung329 said:
I was not able to take the OTA from AT&T, due to that it was rooted and Xposed, so somehow the system check would backfire. When I got the phone, it was on MK2, and I only rooted it and installed custom recovery, for I only need to be able to delete some stuff at will, thus, the root access.
Actually, since I can't boot pass the Samsung custom lock, is it still possible to use Odin? I would have thought Odin would not recognize the phone since it is not on.....
Click to expand...
Click to collapse
It will still work, ODIN requires you to hold one of the volume buttons while powering on to go into download mode on the phone which doesn't require booting to system.
DeadlySin9 said:
It will still work, ODIN requires you to hold one of the volume buttons while powering on to go into download mode on the phone which doesn't require booting to system.
Click to expand...
Click to collapse
OK, so just tried Odin it using the files from Deadly Venom Kitkat Magic Tool. Odin caught the phone alright, but after the files are lined up (the mk2 ones), it give me the following:
Get PIT for mapping..
There is no PIT partition
All threads completed. (succeed 0/ failed 1)
And of course, the top also showed FAIL!
Any suggestions? Try going directly to NB1 and downgrade from there?
iantung329 said:
OK, so just tried Odin it using the files from Deadly Venom Kitkat Magic Tool. Odin caught the phone alright, but after the files are lined up (the mk2 ones), it give me the following:
Get PIT for mapping..
There is no PIT partition
All threads completed. (succeed 0/ failed 1)
And of course, the top also showed FAIL!
Any suggestions? Try going directly to NB1 and downgrade from there?
Click to expand...
Click to collapse
So after an all-night, I finally got it back up and running. Here is what I did, in case someone runs into the same problem.
I grabbed the MK2 file here, un-zip it, Odin it to its respective slots, and then flash it. It took over 10 mins, but it did finish the flash, and Odin showed "PASS!"
So, now I have another question, I booted it up like when it first came in the box, so went through and did all the setup. I went into setting, and I see the following:
Android version: 4.3
Baseband: I337-MK2
Kernel: signed Sat Nov 16 14:33:13 KST 2013
Build #: JSS-MK2
So if I want to do this upgrade to 4.4.2/4.4.3 again, would I consider my phone as stock MK2 that has not been tried to upgrade to 4.4.2/4.4.3? I did try and confirmed that I don't have root (obviously), so I guess I have to treat this phone as if it never took any updates/modifications? Then I would ask which route to follow to ensure the best and most confirm result of upgrading to either 4.4.2/4.4.3.
Thanks all for your thoughts on how to de-bug this. :laugh:
iantung329 said:
So after an all-night, I finally got it back up and running. Here is what I did, in case someone runs into the same problem.
I grabbed the MK2 file here, un-zip it, Odin it to its respective slots, and then flash it. It took over 10 mins, but it did finish the flash, and Odin showed "PASS!"
So, now I have another question, I booted it up like when it first came in the box, so went through and did all the setup. I went into setting, and I see the following:
Android version: 4.3
Baseband: I337-MK2
Kernel: signed Sat Nov 16 14:33:13 KST 2013
Build #: JSS-MK2
So if I want to do this upgrade to 4.4.2/4.4.3 again, would I consider my phone as stock MK2 that has not been tried to upgrade to 4.4.2/4.4.3? I did try and confirmed that I don't have root (obviously), so I guess I have to treat this phone as if it never took any updates/modifications? Then I would ask which route to follow to ensure the best and most confirm result of upgrading to either 4.4.2/4.4.3.
Thanks all for your thoughts on how to de-bug this. :laugh:
Click to expand...
Click to collapse
Yes your phone is stock MK2.
I do not know about 4.4.3 but you can find many 4.4.2 custom rom in the developer section.
First you need to root the phone. You can get the required files and instruction from here.
Second, you need to install the custom recovery. Since you are on MK2 you need to use Safestrap version 3.71. You can get the file and instructions here.
Once you have rooted and finish installing the SS (safestrap) you can find the custom rom in the developer section. Find the roms with SS option.
sway8966 said:
Yes your phone is stock MK2.
I do not know about 4.4.3 but you can find many 4.4.2 custom rom in the developer section.
First you need to root the phone. You can get the required files and instruction from here.
Second, you need to install the custom recovery. Since you are on MK2 you need to use Safestrap version 3.71. You can get the file and instructions here.
Once you have rooted and finish installing the SS (safestrap) you can find the custom rom in the developer section. Find the roms with SS option.
Click to expand...
Click to collapse
Sway8966, thank you for saving my behind more than once.
I will be following your instruction as to rooting the phone and also install custom recovery. However, if you see my first post, it seems I need to first install SS 3.71 to root, then SS 3.72 to upgrade to NB1/NC1? I will take a safe bet that I can't just use SS 3.72 to avoid brick. Also, that GPE version ROM, I had trouble finding the kernel, would there be a place to find it? Or is it in the package? I un-zipped it, but can't find the file that looks like the kernel in it.
Thanks again. :laugh:
iantung329 said:
Sway8966, thank you for saving my behind more than once.
I will be following your instruction as to rooting the phone and also install custom recovery. However, if you see my first post, it seems I need to first install SS 3.71 to root, then SS 3.72 to upgrade to NB1/NC1? I will take a safe bet that I can't just use SS 3.72 to avoid brick. Also, that GPE version ROM, I had trouble finding the kernel, would there be a place to find it? Or is it in the package? I un-zipped it, but can't find the file that looks like the kernel in it.
Thanks again. :laugh:
Click to expand...
Click to collapse
iantung329 I am glad to help you out.
You do not need to install SS recovery first to root the phone. Rooting is done by using the adb command to push the super user in the system area.
Since you are in a MK2 firmware/bootloader Safestrap 3.71 is the only one you can use.
Also your bootloader is MK2 so I would not go to install the NB1/NC1 system file on your phone. SS 3.72 is for the NB1/NC1.
To upgrade your phone to 4.4.2 OS you can find the custom rom packages (including the kernel) in here.
Bootloader MK2 and above can not use the custom kernel since there is no exploit for the kernel out so far. So you need to choose the TOUCHWIZ rom with SS version, not AOSP (Android open-source project) rom.
We are not supposed to tell you which rom to choose because people might not have similar taste or expectation in the choice of rom. Read around and choose the rom that you want.
If you'd asked me, I use Golden Eye rom. I am on NC1. You can see that in my signature section.
I will tell you how I installed the Golden eye rom as an example.
I download the package (zip file), my NC1 stock kernel file and superSU file.
Using the safestrap I installed the package zip file. After the installation finished I installed the NC1 kernel file and SuperSU file. Then I reboot my phone. That is. Other roms might have different instructions.
iantung329 said:
Sway8966, thank you for saving my behind more than once.
I will be following your instruction as to rooting the phone and also install custom recovery. However, if you see my first post, it seems I need to first install SS 3.71 to root, then SS 3.72 to upgrade to NB1/NC1? I will take a safe bet that I can't just use SS 3.72 to avoid brick. Also, that GPE version ROM, I had trouble finding the kernel, would there be a place to find it? Or is it in the package? I un-zipped it, but can't find the file that looks like the kernel in it.
Thanks again. :laugh:
Click to expand...
Click to collapse
sway8966 said:
iantung329 I am glad to help you out.
You do not need to install SS recovery first to root the phone. Rooting is done by using the adb command to push the super user in the system area.
Since you are in a MK2 firmware/bootloader Safestrap 3.71 is the only one you can use.
Also your bootloader is MK2 so I would not go to install the NB1/NC1 system file on your phone. SS 3.72 is for the NB1/NC1.
To upgrade your phone to 4.4.2 OS you can find the custom rom packages (including the kernel) in here.
Bootloader MK2 and above can not use the custom kernel since there is no exploit for the kernel out so far. So you need to choose the TOUCHWIZ rom with SS version, not AOSP (Android open-source project) rom.
We are not supposed to tell you which rom to choose because people might not have similar taste or expectation in the choice of rom. Read around and choose the rom that you want.
If you'd asked me, I use Golden Eye rom. I am on NC1. You can see that in my signature section.
I will tell you how I installed the Golden eye rom as an example.
I download the package (zip file), my NC1 stock kernel file and superSU file.
Using the safestrap I installed the package zip file. After the installation finished I installed the NC1 kernel file and SuperSU file. Then I reboot my phone. That is. Other roms might have different instructions.
Click to expand...
Click to collapse
As sway said, you do not need Safestrap to root, you just use Saferoot and you have root. However, you can actually use SS 3.72 and it would be better to use it since you can then mount /system even while on a 4.4.2 kernel. You can also use the single GPE located in the general section. Sway's ROM flashing instructions are correct, but also remember to flash the kernel module zip in Safestrap, and you would be using the MLD set since you have the MK2 bootloader. The kernels and everything you need are included in the KitKat Magic Toolkit.
DeadlySin9 said:
As sway said, you do not need Safestrap to root, you just use Saferoot and you have root. However, you can actually use SS 3.72 and it would be better to use it since you can then mount /system even while on a 4.4.2 kernel. You can also use the single GPE located in the general section. Sway's ROM flashing instructions are correct, but also remember to flash the kernel module zip in Safestrap, and you would be using the MLD set since you have the MK2 bootloader. The kernels and everything you need are included in the KitKat Magic Toolkit.
Click to expand...
Click to collapse
:crying::crying::crying:
Sigh, I will admit, I have done it again, so I am back to flashing the MK2 file from a few post ago.
I think I will either go with stock rooted ROM or the GPE version, I think the only thing I am missing is the kernel, which I found in one of the post I have to Loki it since I am on AT&T, but I can't find the Loki software, or would that be using Odin as well?
The only reason I am looking to root this phone is so that I can tether. Traveling roughly 2-3 weeks a month ain't fun, but not all hotels have free wifi, so having my phone rooted and able to tether is like a life line. Also, after I tried GB, its wonderful! Apart from I can't find a good quiet time option, everything is awesome being able to use GB and AdBlock. Does either Sway or DeadlySin9 have a good recommendation for quiet time app/mod?
As soon as I get the phone back on stock MK2, I will be looking into either stock root ROM or GPE version. Thanks all! :fingers-crossed:
iantung329 said:
:crying::crying::crying:
Sigh, I will admit, I have done it again, so I am back to flashing the MK2 file from a few post ago.
I think I will either go with stock rooted ROM or the GPE version, I think the only thing I am missing is the kernel, which I found in one of the post I have to Loki it since I am on AT&T, but I can't find the Loki software, or would that be using Odin as well?
The only reason I am looking to root this phone is so that I can tether. Traveling roughly 2-3 weeks a month ain't fun, but not all hotels have free wifi, so having my phone rooted and able to tether is like a life line. Also, after I tried GB, its wonderful! Apart from I can't find a good quiet time option, everything is awesome being able to use GB and AdBlock. Does either Sway or DeadlySin9 have a good recommendation for quiet time app/mod?
As soon as I get the phone back on stock MK2, I will be looking into either stock root ROM or GPE version. Thanks all! :fingers-crossed:
Click to expand...
Click to collapse
OK. @DeadlySin9, got the final question (hopefully :fingers-crossed
I am going to flash GPE version (here) and I will be following the direction on that, wipe, flash, kernel then reboot. You mentioned that I should use the MLD kernels, but which one is that in the Kitkat magic tool? AP_MLD, BL_MLD? And now I have SS 3.71 on the phone, would you recommend uninstalling that and install SS 3.72 instead, since I will be flashing GPE version anyway?
Also, what of this ROM (here)? I guess I can't flash this one?
iantung329 said:
OK. @DeadlySin9, got the final question (hopefully :fingers-crossed
I am going to flash GPE version (here) and I will be following the direction on that, wipe, flash, kernel then reboot. You mentioned that I should use the MLD kernels, but which one is that in the Kitkat magic tool? AP_MLD, BL_MLD? And now I have SS 3.71 on the phone, would you recommend uninstalling that and install SS 3.72 instead, since I will be flashing GPE version anyway?
Also, what of this ROM (here)? I guess I can't flash this one?
Click to expand...
Click to collapse
Actually, neither of those work. There's one in the General section, with Safestrap in the thread title. That's the one you need. I do recommend going to 3.72 on Safestrap, and you need to use both the AP and BL files in ODIN.
Sent from my SGH-I337 running GPE
DeadlySin9 said:
Actually, neither of those work. There's one in the General section, with Safestrap in the thread title. That's the one you need. I do recommend going to 3.72 on Safestrap, and you need to use both the AP and BL files in ODIN.
Sent from my SGH-I337 running GPE
Click to expand...
Click to collapse
This is the only one I can find (here)
Also, by the look of it, paid apps wouldn't work in this ROM, that might be a problem.
Here is another one that I was considering from the start (here), but I am not sure if I should follow the first post or second?
iantung329 said:
This is the only one I can find (here)
Also, by the look of it, paid apps wouldn't work in this ROM, that might be a problem.
Here is another one that I was considering from the start (here), but I am not sure if I should follow the first post or second?
Click to expand...
Click to collapse
If you're still on MK2 then you can use the second one. And yeah, you can't download paid apps from the Play Store for some reason.
DeadlySin9 said:
If you're still on MK2 then you can use the second one. And yeah, you can't download paid apps from the Play Store for some reason.
Click to expand...
Click to collapse
@DeadlySin9, thanks for pointing out the correct one to use, and yes, I am still stock on MK2, rooted and have not installed SS, pending the version discussion. I will go ahead and install SS 3.72 and the ROM from the first post and :fingers-crossed: that it will work wonders.
The reason that I am choosing this over the GPE, don't get me wrong, GPE I think is better, but no download paid apps is not going to work for me, some apps like, root explorer and a few others are a must on the phone. So that's a bummer. I wish it works, then I can just flash and be in peace.
Thank you @sway8966 also for helping out on this. I just freaked out when I found out the work phone was dead.....
Sup you guys,
I may be in a new predicament for myself, so I would like to ask a few questions before I tackle this task. It seems that I've flashed a JB rom on the stock slot of SS, and I thought that I had the NC2 kernel intact to do so. However, all I get is a black screen and then a botched up system partition, a soft brick if you will, on the stock slot. Couldn't mount the system, so wiping anything is out the window. In order to make my phone usable for now, I had to install a rom on Slot 1. All is fine, but the battery drain is a killer, so I would like recover the system partition of the stock slot. Now, I've read a few threads that kind of pertains to my situation and I learned that a pit file flash can recover it back to normal. Can I just flash only the pit through Odin, or are there other steps that I have to do to get this back on track? Any help and guidance would be greatly appreciated.
I need help too
krazyg said:
Sup you guys,
I may be in a new predicament for myself, so I would like to ask a few questions before I tackle this task. It seems that I've flashed a JB rom on the stock slot of SS, and I thought that I had the NC2 kernel intact to do so. However, all I get is a black screen and then a botched up system partition, a soft brick if you will, on the stock slot. Couldn't mount the system, so wiping anything is out the window. In order to make my phone usable for now, I had to install a rom on Slot 1. All is fine, but the battery drain is a killer, so I would like recover the system partition of the stock slot. Now, I've read a few threads that kind of pertains to my situation and I learned that a pit file flash can recover it back to normal. Can I just flash only the pit through Odin, or are there other steps that I have to do to get this back on track? Any help and guidance would be greatly appreciated.
Click to expand...
Click to collapse
I just got into ROMs and safeatrap and such. I started by trying to load them to the stock slot, which failed every time. I then made slots and had 3 ROMs, but the battery life was not good.
So I wanted to put a ROM on the stock slot. This is with nc2 on kitkat. When I went to load a ROM in stock slot, safestrap failed saying it couldn't mount /system. I tried wiping, but there too it said fail to mount /system.
I did "Fix Permissions" and rebooted. I was greeted by the Samsung boot screen, but it froze there. No safestrap, nothing. I recovery booted and the stock recovery says "E:failed to mount /system (Invalid argument)"
So now it seems that no part of my phone can get to /system. I will look into a .pit file and would appreciate guidance as well.
Seems like you have the problem that I had a week ago. I fixed it by flashing a stock tar and the pit file through Odin. Though I wasn't too sure if just flashing pit would repair the system partition (though, I think it would've been fine; I should've just done it with no questions asked), but in my situation, I got a bit more desperate as my problem got sort of worse. Yea, running any rom on any slot other than the stock slot will kill your battery quick. So a reminder, if you have a messed up system partition, do not let the battery die because your phone will be soft bricked and you won't be able to boot up to anything other than Download mode. At that point, I just flashed the stock tar and the pit file just to be on the safe side and start over. After I rooted and installed SS, I went and checked if it was working properly. It did for the most part, but I remember that I was still on slot 1 before my battery died and SS was highlighted that I was still on that slot. I think because of that, it gave me certain errors on some of things I was testing out, but you will be able to install normally on the stock slot again. There are some other issues I have because of that ordeal, but it's not game breaking, so make sure that you're on the stock slot before flashing the files through Odin.
krazyg said:
Seems like you have the problem that I had a week ago. I fixed it by flashing a stock tar and the pit file through Odin. Though I wasn't too sure if just flashing pit would repair the system partition (though, I think it would've been fine; I should've just done it with no questions asked), but in my situation, I got a bit more desperate as my problem got sort of worse. Yea, running any rom on any slot other than the stock slot will kill your battery quick. So a reminder, if you have a messed up system partition, do not let the battery die because your phone will be soft bricked and you won't be able to boot up to anything other than Download mode. At that point, I just flashed the stock tar and the pit file just to be on the safe side and start over. After I rooted and installed SS, I went and checked if it was working properly. It did for the most part, but I remember that I was still on slot 1 before my battery died and SS was highlighted that I was still on that slot. I think because of that, it gave me certain errors on some of things I was testing out, but you will be able to install normally on the stock slot again. There are some other issues I have because of that ordeal, but it's not game breaking, so make sure that you're on the stock slot before flashing the files through Odin.
Click to expand...
Click to collapse
Thanks for the reply. I flashed a stock tar last night since the stock bootloader couldn't mount /system. Not sure which slot was selected in safestrap, I couldn't get back in because it would freeze before safestrap.
I did not use a .pit file (FYI), and am now back on stock ROM.
What I woluld like isto flash a custom ROM, say a debloated, rooted ROM with ODIN. I see they are all zips with folders, not .tar. Maybe I could take out the recovery.img and put it into a ROM's zip and save the zip as a tar and flash it? Would this possibly break my device if it tried to flash a wrong recovery? I don't know.
If anyone has some knowledge of these things, I would appreciate tips.
Why wouldn't you towel root, install SS, and install a ROM?
xdadevnube said:
Why wouldn't you towel root, install SS, and install a ROM?
Click to expand...
Click to collapse
Because I have only been able to get ROMs working on slots 1-4 of SS and not stock slot, so the battery life is terrible. Also, it would be faster and easier just to flash a ROM with ODIN and not have to worry if my version of android has a working root method (thankfully towelroot v3 worked).
I need help. lol. my Samsung note 3 is stuck in bootloop. I posted this in the thread for the hyperdrive rom because its what I was trying to flash.
i wiped and flashed in the stock slot. and now im stuck in the bootloop problem. it says recovery booting in the upper left of the screen and just keeps rebooting. I tried going in to odin and reloading the "n900v kk firmware" and nothing. anyone know a fix for this. is there something I can download to flash to fix this. I know I will have to use odin, just not sure what.
donelam304 said:
I need help. lol. my Samsung note 3 is stuck in bootloop. I posted this in the thread for the hyperdrive rom because its what I was trying to flash.
i wiped and flashed in the stock slot. and now im stuck in the bootloop problem. it says recovery booting in the upper left of the screen and just keeps rebooting. I tried going in to odin and reloading the "n900v kk firmware" and nothing. anyone know a fix for this. is there something I can download to flash to fix this. I know I will have to use odin, just not sure what.
Click to expand...
Click to collapse
Hi I'm kinda new to the community and Android, but I'll try to help. I've been having issues trying to use safestrap to install my custom roms. I know that 3.72 had issues with the extra slots. That was supposed to be fixed in 3.75. In short I haven't reached a loop but have had to flash to stock several times with Odin. I had to remove my battery to get the phone in "power off" mode. From there, I booted to download for odin (assuming you can get it to boot to download-volume down/home/power buttons to get there).
Once I got there, I just made sure I had the firmware version I wanted to go back to, plugged it into odin and bam! Back to stock to start over.
Bryotch said:
Hi I'm kinda new to the community and Android, but I'll try to help. I've been having issues trying to use safestrap to install my custom roms. I know that 3.72 had issues with the extra slots. That was supposed to be fixed in 3.75. In short I haven't reached a loop but have had to flash to stock several times with Odin. I had to remove my battery to get the phone in "power off" mode. From there, I booted to download for odin (assuming you can get it to boot to download-volume down/home/power buttons to get there).
Once I got there, I just made sure I had the firmware version I wanted to go back to, plugged it into odin and bam! Back to stock to start over.
Click to expand...
Click to collapse
I can boot in to the download mode. has no problem. even tried flashing the n900v_kk_firmware.tar.md5 tar,
ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5
and even tried the N900VVRUCNC4_N900VVZWCNC4_N900VVRUCNC4_HOME.tar.md5
and when I do the MJE one it says invalid. am I flashing the wrong file is there something else I should be using. when I get in to manual mode after it boots in to manual recovery mode it says im on NC4. it says in the upper left corner the following:
Android stem recovery <3e>
KOT49H.N900VVRUCNC
volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
is there a way to flash safestrap or CWM in odin.
donelam304 said:
I can boot in to the download mode. has no problem. even tried flashing the n900v_kk_firmware.tar.md5 tar,
ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5
and even tried the N900VVRUCNC4_N900VVZWCNC4_N900VVRUCNC4_HOME.tar.md5
and when I do the MJE one it says invalid. am I flashing the wrong file is there something else I should be using. when I get in to manual mode after it boots in to manual recovery mode it says im on NC4. it says in the upper left corner the following:
Android stem recovery <3e>
KOT49H.N900VVRUCNC
volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
is there a way to flash safestrap or CWM in odin.
Click to expand...
Click to collapse
You're running the same build I have, been having similar issues. I used Odin no completely repartition and wipe the phone. I used N900VVRUCNC4_N900VVZWCNC4_N900VVRUCNC4_HOME.tar.md5 and the HLTE.pit file (for this build). In Odin You put the pit and md5 files in (.pit file in the PIT slot and md5 in the AP slot on Odin 3.09) This took me back to the KK NC4 build, granted, I lost alot of data but I didn't use a Nandroid backup either. This got me back to a functional device but i'm still having issues getting ANY custom roms to work. I did flash to NC2 kernel since then and still no luck. Let me know if that helps. I can get the files I used if you can't find them, but most everything came from xda.
PS. you can find some firmwares with recovery and other things added. I avoided these just to make sure I could get back to stock. I use Towelroot, BusyBox, SuperSU, and Safestrap 3.75 b04
Bryotch said:
You're running the same build I have, been having similar issues. I used Odin no completely repartition and wipe the phone. I used N900VVRUCNC4_N900VVZWCNC4_N900VVRUCNC4_HOME.tar.md5 and the HLTE.pit file (for this build). In Odin You put the pit and md5 files in (.pit file in the PIT slot and md5 in the AP slot on Odin 3.09) This took me back to the KK NC4 build, granted, I lost alot of data but I didn't use a Nandroid backup either. This got me back to a functional device but i'm still having issues getting ANY custom roms to work. I did flash to NC2 kernel since then and still no luck. Let me know if that helps. I can get the files I used if you can't find them, but most everything came from xda.
PS. you can find some firmwares with recovery and other things added. I avoided these just to make sure I could get back to stock. I use Towelroot, BusyBox, SuperSU, and Safestrap 3.75 b04
Click to expand...
Click to collapse
i done a search on the stock firmware you mentioned and after about 2 dozen websites and and trying about 15 flashes I finally got it to work. this has been one heck of a day. I finally got it to work. I am in the process of trying to get safestrap and stuff on it now. I already used towelroot to rot it. what version of safestrap do you recommend. I was told 3.72 was for KK. and 3.75 was for the Samsung galaxy S5.
donelam304 said:
i done a search on the stock firmware you mentioned and after about 2 dozen websites and and trying about 15 flashes I finally got it to work. this has been one heck of a day. I finally got it to work. I am in the process of trying to get safestrap and stuff on it now. I already used towelroot to rot it. what version of safestrap do you recommend. I was told 3.72 was for KK. and 3.75 was for the Samsung galaxy S5.
Click to expand...
Click to collapse
here is the link I found with all the carriers for the note 3
http://galaxynote3root.com/galaxy-note-3-repair/how-to-unroot-galaxy-note-3/
donelam304 said:
here is the link I found with all the carriers for the note 3
http://galaxynote3root.com/galaxy-note-3-repair/how-to-unroot-galaxy-note-3/
Click to expand...
Click to collapse
thanks so much by the way. I greatly appreciate the assistance.
EDIT: I have successfully installed the Alliance ROM. Here's how i did it.
Prerequisites:
Your phone at at least 50% battery
A charge cable
MicroSD card that you can plug into your computer
Odin 3.09
SafeStrap, version 3.75 APK on your MicroSD card
Alliance ROM on your MicroSD card
NCG tar.md5 (the big file, not the kernel)
I started off on a rooted 5.0 VZW Galaxy S5. After some confusion, I downgraded to NCG (4.4.2) using Odin. After doing that, I went to Towelroot, got the APK, rooted, downloaded SuperSU from the play store (I had to sign into google at this point), installed it's binaries (NORMALLY! Don't choose the TWRP method), rebooted when it asked me to. From there, I installed BusyBox from the play store and installed it within the app. Then I installed Safestrap (version 3.75), which I had on my MicroSD card. I used the app My Files to navigate to my MicroSD and installed the APK. Then I installed it within the app, and when the "reboot to recovery" button worked, I rebooted into SafeStrap recovery mode. At this point, the Alliance ROM zip file should ALREADY BE ON YOUR MICROSD CARD, WHICH SHOULD BE IN YOUR PHONE. Now, you're going to press the INSTALL button to the top right in Safestrap recovery, and you're going to navigate to your MicroSD card. It might be already opened to that. Then you're gonna select the Alliance ROM and flash it. After it successfully flashes, reboot into download mode (if for some reason you aren't able to do it immediately, you get into download mode by holding volume down, home button, and power button at the same time). Now, using Odin, you're gonna flash the firmware that the instructions in the Alliance thread tells you to (here's the thread: http://forum.xda-developers.com/ver.../rom-alliancerom-build-3-rom-control-t2818632). If everything works, it's gonna take a couple of minutes, optimize apps, and boot.
Huge thanks to Beans and his team for creating the Alliance mod, and huge thanks to Tulsadiver for helping me get through the process during my confusion.
Original thread below
Hi. I'll cut to the chase. I was an idiot and thought I could just flash the Alliance ROM from my SD card, but my phone is currently a factory restored 5.0. So, after unsuccessfully flashing Alliance ROM, I thought, well, I probably need to be on 4.4.2 to do this. So, what I'm wondering is, do I need to go back down to 4.4.2 to install Alliance ROM? And do I need Safestrap recovery to do it, or can I do it from stock recovery (home button+volUp+Power)? I did a lot of digging in the Alliance ROM post and there were no posts regarding my problem/question, probably because they're all experienced and I'm not (this is my first time trying to flash a custom ROM).
It SOUNDS like I need to flash a full stock tar using Odin, is that correct? Once I do that, I would be on stock wiped 4.4.2, I assume. From there, could I flash the Alliance ROM and continue with the instructions? Or do I need to root first and get safestrap and all that crap? I feel like Beans was really vague with his instructions on installing ROMs, but whatever. Please help though, I'm kind of stuck in the middle of this with a softbricked phone.
Thank you so much in advance, I appreciate it.
~isra
EDIT: Also, I was on ROOTED 5.0 Lollipop just before this. I just got so sick of lollipop, I was ready for something different. So here we are. To confirm, my phone is the standard retail SM-G900VZW model.
EDIT2: Apparently App Ops and SuperSU survived the wipe and, after downloading Root Checker, I can confirm that I'm still rooted... Huh.
israphial said:
Hi. I'll cut to the chase. I was an idiot and thought I could just flash the Alliance ROM from my SD card, but my phone is currently a factory restored 5.0. So, after unsuccessfully flashing Alliance ROM, I thought, well, I probably need to be on 4.4.2 to do this. So, what I'm wondering is, do I need to go back down to 4.4.2 to install Alliance ROM? And do I need Safestrap recovery to do it, or can I do it from stock recovery (home button+volUp+Power)? I did a lot of digging in the Alliance ROM post and there were no posts regarding my problem/question, probably because they're all experienced and I'm not (this is my first time trying to flash a custom ROM).
It SOUNDS like I need to flash a full stock tar using Odin, is that correct? Once I do that, I would be on stock wiped 4.4.2, I assume. From there, could I flash the Alliance ROM and continue with the instructions? Or do I need to root first and get safestrap and all that crap? I feel like Beans was really vague with his instructions on installing ROMs, but whatever. Please help though, I'm kind of stuck in the middle of this with a softbricked phone.
Thank you so much in advance, I appreciate it.
~isra
EDIT: Also, I was on ROOTED 5.0 Lollipop just before this. I just got so sick of lollipop, I was ready for something different. So here we are. To confirm, my phone is the standard retail SM-G900VZW model.
EDIT2: Apparently App Ops and SuperSU survived the wipe and, after downloading Root Checker, I can confirm that I'm still rooted... Huh.
Click to expand...
Click to collapse
Download busybox from play store. Install it. Install safestrap. Once recovery is installed, go into recovery, install alliance, from within safestrap, boot into download mode and flash the full firmware Odin tar.
Tulsadiver said:
Download busybox from play store. Install it. Install safestrap. Once recovery is installed, go into recovery, install alliance, from within safestrap, boot into download mode and flash the full firmware Odin tar.
Click to expand...
Click to collapse
Wait, so I don't need to downgrade my phone? Keep in mind I'm on stock rooted 5.0, which just got factory reset so I got nothing except for the root. Also, what full firmware odin tar are you referring to? NE9? This one: https://www.androidfilehost.com/?fid=23610159112652201
Or this one: https://www.androidfilehost.com/?fid=23622183712472727
I'm getting these links from here: http://forum.xda-developers.com/ver...ment/stock-collection-kernels-modems-t2842069
I really appreciate you replying. Thank you.
The first one. That firmware will downgrade you to NE9.
Tulsadiver said:
The first one. That firmware will downgrade you to NE9.
Click to expand...
Click to collapse
Ok, so I don't need to downgrade to install the ROM. Got it. Thank you. Is there anything else I should know?
Not that I know of. ROM installations are different so always refer to their installation instructions. Some will say to flash the firmware first. The op knows best. Alliance NE9 says to do a full wipe (everything but SD card). Install the ROM, reboot to download mode ( don't hit reboot system). Once in download mode, flash the firmware tar and let your phone reboot.
Tulsadiver said:
Not that I know of. ROM installations are different so always refer to their installation instructions. Some will say to flash the firmware first. The op knows best. Alliance NE9 says to do a full wipe (everything but SD card). Install the ROM, reboot to download mode ( don't hit reboot system). Once in download mode, flash the firmware tar and let your phone reboot.
Click to expand...
Click to collapse
So, I installed Safestrap and did all that, but when I press the reboot into recovery button, it just reboots the phone normally. It doesn't go into safestrap recovery. Am I supposed to hold some buttons or something?
Did safestrap ask for SuperSU permissions? Did you install busy box? You can't just download the app.
Tulsadiver said:
Did safestrap ask for SuperSU permissions? Did you install busy box? You can't just download the app.
Click to expand...
Click to collapse
Yes, I've installed BusyBox and given SS root permissions. I installed the APK 3.75 Safestrap that I used to get into SS recovery when I was getting to rooted 5.0 a while back, so I know that the APK isn't corrupt or anything like that.
I forgot. You are on lollipop. You need to flash the NE9 kernel first ( via Odin). You already have safestrap but it doesn't work on lollipop. After you flash the NE9 kernel you will have the option to boot into recovery. Have alliance on your SD card ready to install.
Tulsadiver said:
I forgot. You are on lollipop. You need to flash the NE9 kernel first ( via Odin). You already have safestrap but it doesn't work on lollipop. After you flash the NE9 kernel you will have the option to boot into recovery. Have alliance on your SD card ready to install.
Click to expand...
Click to collapse
Found a "NE9 Stock tar.md5". Does that sound right? DL is here: https://www.androidfilehost.com/?fid=23578570567721275
Found a "NE9 Stock tar.md5". Does that sound right? DL is here: https://www.androidfilehost.com/?fid=23578570567721275
israphial said:
Found a "NE9 Stock tar.md5". Does that sound right? DL is here: https://www.androidfilehost.com/?fid=23578570567721275
Click to expand...
Click to collapse
That is it.
Tulsadiver said:
That is it.
Click to expand...
Click to collapse
Thank you. I'm going to flash the kernel then, then I'll get back to you if anything comes up. Again, I really appreciate you helping me. Thank you.
Tulsadiver said:
That is it.
Click to expand...
Click to collapse
It booted into stock recovery mode after odin successfully flashed NE9. Now do I install the ROM from stock recovery, or do I boot the phone and get to Safestrap to install the ROM from Safestrap recovery? I am currently in recovery mode.
You must not have had safestrap on your phone after all. Can you get back to download mode? You probably need to flash your lollipop kernel to get back to lollipop.
Tulsadiver said:
You must not have had safestrap on your phone after all. Can you get back to download mode? You probably need to flash your lollipop kernel to get back to lollipop.
Click to expand...
Click to collapse
I definitely had safestrap. Though, here's something: Everyone talks about a menu that pops up during boot that allows you to enter either safestrap recovery, or boot, and I've never had/seen that menu, even when I was rooting 5.0. Yes, my BusyBox worked and was properly installed, and yes, I had Safestrap recovery installed.
I just tried rebooting and it after sitting at the first screen for a while, it rebooted quickly and went back into recovery mode. What if I try installing Alliance from recovery mode? Will it work?
israphial said:
I definitely had safestrap. Though, here's something: Everyone talks about a menu that pops up during boot that allows you to enter either safestrap recovery, or boot, and I've never had/seen that menu, even when I was rooting 5.0. Yes, my BusyBox worked and was properly installed, and yes, I had Safestrap recovery installed.
I just tried rebooting and it after sitting at the first screen for a while, it rebooted quickly and went back into recovery mode. What if I try installing Alliance from recovery mode? Will it work?
Click to expand...
Click to collapse
I've never been on stock recovery before. I think it has to be a custom recovery. You might need to pull your battery and let it set for a bit and see if you can get into download mode.
Tulsadiver said:
I've never been on stock recovery before. I think it has to be a custom recovery. You might need to pull your battery and let it set for a bit and see if you can get into download mode.
Click to expand...
Click to collapse
I can get into download mode perfectly fine. I'm going to kernel back to 5.0 then...
But what do I do now? Should I downgrade to 4.4.2 with the stock firmware once I successfully boot 5.0?
EDIT: Yup, booted 5.0 perfectly fine. Now what? Downgrade to 4.4.2 and flash the NE9 Kernel?
Proof that Safestrap is on my phone:
http://imgur.com/cGa1v1n